Climate change technology transfer to developing countries: evidence analysis and policy recommendations

Developing countries are experiencing unprecedented levels of economic growth. As a result, they will be responsible for most of the future growth in energy demand and greenhouse gas (GHG) emissions. Curbing GHG emissions in developing countries has become one of the cornerstones of a future international agreement under the United Nations Framework Convention for Climate Change (UNFCCC). However, setting caps for developing countries’ GHG emissions has encountered strong resistance in the current round of negotiations. Continued economic growth that allows poverty eradication is still the main priority for most developing countries, and caps are perceived as a constraint to future growth prospects. The development, transfer and use of low-carbon technologies have more positive connotations, and are seen as the potential path towards low-carbon development. So far, the success of the UNFCCC process in improving the levels of technology transfer (TT) to developing countries has been limited. This thesis analyses the causes for such limited success and seeks to improve on the understanding about what constitutes TT in the field of climate change, establish the factors that enable them in developing countries and determine which policies could be implemented to reinforce these factors. Despite the wide recognition of the importance of technology and knowledge transfer to developing countries in the climate change mitigation policy agenda, this issue has not received sufficient attention in academic research. Current definitions of climate change TT barely take into account the perspective of actors involved in actual climate change TT activities, while respective measurements do not bear in mind the diversity of channels through which these happen and the outputs and effects that they convey. Furthermore, the enabling factors for TT in non-BRIC (Brazil, Russia, India, China) developing countries have been seldom investigated, and policy recommendations to improve the level and quality of TTs to developing countries have not been adapted to the specific needs of highly heterogeneous countries, commonly denominated as “developing countries”. This thesis contributes to enriching the climate change TT debate from the perspective of a smaller emerging economy (Chile) and by undertaking a quantitative analysis of enabling factors for TT in a large sample of developing countries. Two methodological approaches are used to study climate change TT: comparative case study analysis and quantitative analysis. Comparative case studies analyse TT processes in ten cases based in Chile, all of which share the same economic, technological and policy frameworks, thus enabling us to draw conclusions on the enabling factors and obstacles operating in TT processes. The quantitative analysis uses three methodologies – principal component analysis, multiple regression analysis and cluster analysis – to assess the performance of developing countries in a number of enabling factors and the relationship between these factors and indicators of TT, as well as to create groups of developing countries with similar performances. The findings of this thesis are structured to provide responses to four main research questions: What constitutes technology transfer and how does it happen? Is it possible to measure technology transfer, and what are the main challenges in doing so? Which factors enable climate change technology transfer to developing countries? And how do different developing countries perform in these enabling factors, and how can differentiated policy priorities be defined accordingly? vi Resumen Los paises en desarrollo estan experimentando niveles de crecimiento economico sin precedentes. Como consecuencia, se espera que sean responsables de la mayor parte del futuro crecimiento global en demanda energetica y emisiones de Gases de Efecto de Invernadero (GEI). Reducir las emisiones de GEI en los paises en desarrollo es por tanto uno de los pilares de un futuro acuerdo internacional en el marco de la Convencion Marco de las Naciones Unidas para el Cambio Climatico (UNFCCC). La posibilidad de compromisos vinculantes de reduccion de emisiones de GEI ha sido rechazada por los paises en desarrollo, que perciben estos limites como frenos a su desarrollo economico y a su prioridad principal de erradicacion de la pobreza. El desarrollo, transferencia y uso de tecnologias bajas en carbono tiene connotaciones mas positivas y se percibe como la via hacia un crecimiento bajo en carbono. Hasta el momento, la UNFCCC ha tenido un exito limitado en la promocion de transferencias de tecnologia (TT) a paises en desarrollo. Esta tesis analiza las causas de este resultado y busca mejorar la comprension sobre que constituye transferencia de tecnologia en el area de cambio climatico, cuales son los factores que la facilitan en paises en desarrollo y que politicas podrian implementarse para reforzar dichos factores. A pesar del extendido reconocimiento sobre la importancia de la transferencia de tecnologia a paises en desarrollo en la agenda politica de cambio climatico, esta cuestion no ha sido suficientemente atendida por la investigacion existente. Las definiciones actuales de transferencia de tecnologia relacionada con la mitigacion del cambio climatico no tienen en cuenta la diversidad de canales por las que se manifiestan o los efectos que consiguen. Los factores facilitadores de TT en paises en desarrollo no BRIC (Brasil, Rusia, India y China) apenas han sido investigados, y las recomendaciones politicas para aumentar el nivel y la calidad de la TT no se han adaptado a las necesidades especificas de paises muy heterogeneos aglutinados bajo el denominado grupo de "paises en desarrollo". Esta tesis contribuye a enriquecer el debate sobre la TT de cambio climatico con la perspectiva de una economia emergente de pequeno tamano (Chile) y el analisis cuantitativo de factores que facilitan la TT en una amplia muestra de paises en desarrollo. Se utilizan dos metodologias para el estudio de la TT a paises en desarrollo: analisis comparativo de casos de estudio y analisis cuantitativo basado en metodos multivariantes. Los casos de estudio analizan procesos de TT en diez casos basados en Chile, para derivar conclusiones sobre los factores que facilitan u obstaculizan el proceso de transferencia. El analisis cuantitativo multivariante utiliza tres metodologias: regresion multiple, analisis de componentes principales y analisis cluster. Con dichas metodologias se busca analizar el posicionamiento de diversos paises en cuanto a factores que facilitan la TT; las relaciones entre dichos factores e indicadores de transferencia tecnologica; y crear grupos de paises con caracteristicas similares que podrian beneficiarse de politicas similares para la promocion de la transferencia de tecnologia. Los resultados de la tesis se estructuran en torno a cuatro preguntas de investigacion: .Que es la transferencia de tecnologia y como ocurre?; .Es posible medir la transferencia de tecnologias de bajo carbono?; .Que factores facilitan la transferencia de tecnologias de bajo carbono a paises en desarrollo? y .Como se puede agrupar a los paises en desarrollo en funcion de sus necesidades politicas para la promocion de la transferencia de tecnologias de bajo carbono?

OntoTag - A Linguistic and Ontological Annotation Model Suitable for the Semantic Web

OntoTag - A Linguistic and Ontological Annotation Model Suitable for the Semantic Web 1. INTRODUCTION. LINGUISTIC TOOLS AND ANNOTATIONS: THEIR LIGHTS AND SHADOWS Computational Linguistics is already a consolidated research area. It builds upon the results of other two major ones, namely Linguistics and Computer Science and Engineering, and it aims at developing computational models of human language (or natural language, as it is termed in this area). Possibly, its most well-known applications are the different tools developed so far for processing human language, such as machine translation systems and speech recognizers or dictation programs. These tools for processing human language are commonly referred to as linguistic tools. Apart from the examples mentioned above, there are also other types of linguistic tools that perhaps are not so well-known, but on which most of the other applications of Computational Linguistics are built. These other types of linguistic tools comprise POS taggers, natural language parsers and semantic taggers, amongst others. All of them can be termed linguistic annotation tools. Linguistic annotation tools are important assets. In fact, POS and semantic taggers (and, to a lesser extent, also natural language parsers) have become critical resources for the computer applications that process natural language. Hence, any computer application that has to analyse a text automatically and ‘intelligently’ will include at least a module for POS tagging. The more an application needs to ‘understand’ the meaning of the text it processes, the more linguistic tools and/or modules it will incorporate and integrate. However, linguistic annotation tools have still some limitations, which can be summarised as follows: 1. Normally, they perform annotations only at a certain linguistic level (that is, Morphology, Syntax, Semantics, etc.). 2. They usually introduce a certain rate of errors and ambiguities when tagging. This error rate ranges from 10 percent up to 50 percent of the units annotated for unrestricted, general texts. 3. Their annotations are most frequently formulated in terms of an annotation schema designed and implemented ad hoc. A priori, it seems that the interoperation and the integration of several linguistic tools into an appropriate software architecture could most likely solve the limitations stated in (1). Besides, integrating several linguistic annotation tools and making them interoperate could also minimise the limitation stated in (2). Nevertheless, in the latter case, all these tools should produce annotations for a common level, which would have to be combined in order to correct their corresponding errors and inaccuracies. Yet, the limitation stated in (3) prevents both types of integration and interoperation from being easily achieved. In addition, most high-level annotation tools rely on other lower-level annotation tools and their outputs to generate their own ones. For example, sense-tagging tools (operating at the semantic level) often use POS taggers (operating at a lower level, i.e., the morphosyntactic) to identify the grammatical category of the word or lexical unit they are annotating. Accordingly, if a faulty or inaccurate low-level annotation tool is to be used by other higher-level one in its process, the errors and inaccuracies of the former should be minimised in advance. Otherwise, these errors and inaccuracies would be transferred to (and even magnified in) the annotations of the high-level annotation tool. Therefore, it would be quite useful to find a way to (i) correct or, at least, reduce the errors and the inaccuracies of lower-level linguistic tools; (ii) unify the annotation schemas of different linguistic annotation tools or, more generally speaking, make these tools (as well as their annotations) interoperate. Clearly, solving (i) and (ii) should ease the automatic annotation of web pages by means of linguistic tools, and their transformation into Semantic Web pages (Berners-Lee, Hendler and Lassila, 2001). Yet, as stated above, (ii) is a type of interoperability problem. There again, ontologies (Gruber, 1993; Borst, 1997) have been successfully applied thus far to solve several interoperability problems. Hence, ontologies should help solve also the problems and limitations of linguistic annotation tools aforementioned. Thus, to summarise, the main aim of the present work was to combine somehow these separated approaches, mechanisms and tools for annotation from Linguistics and Ontological Engineering (and the Semantic Web) in a sort of hybrid (linguistic and ontological) annotation model, suitable for both areas. This hybrid (semantic) annotation model should (a) benefit from the advances, models, techniques, mechanisms and tools of these two areas; (b) minimise (and even solve, when possible) some of the problems found in each of them; and (c) be suitable for the Semantic Web. The concrete goals that helped attain this aim are presented in the following section. 2. GOALS OF THE PRESENT WORK As mentioned above, the main goal of this work was to specify a hybrid (that is, linguistically-motivated and ontology-based) model of annotation suitable for the Semantic Web (i.e. it had to produce a semantic annotation of web page contents). This entailed that the tags included in the annotations of the model had to (1) represent linguistic concepts (or linguistic categories, as they are termed in ISO/DCR (2008)), in order for this model to be linguistically-motivated; (2) be ontological terms (i.e., use an ontological vocabulary), in order for the model to be ontology-based; and (3) be structured (linked) as a collection of ontology-based triples, as in the usual Semantic Web languages (namely RDF(S) and OWL), in order for the model to be considered suitable for the Semantic Web. Besides, to be useful for the Semantic Web, this model should provide a way to automate the annotation of web pages. As for the present work, this requirement involved reusing the linguistic annotation tools purchased by the OEG research group (http://www.oeg-upm.net), but solving beforehand (or, at least, minimising) some of their limitations. Therefore, this model had to minimise these limitations by means of the integration of several linguistic annotation tools into a common architecture. Since this integration required the interoperation of tools and their annotations, ontologies were proposed as the main technological component to make them effectively interoperate. From the very beginning, it seemed that the formalisation of the elements and the knowledge underlying linguistic annotations within an appropriate set of ontologies would be a great step forward towards the formulation of such a model (henceforth referred to as OntoTag). Obviously, first, to combine the results of the linguistic annotation tools that operated at the same level, their annotation schemas had to be unified (or, preferably, standardised) in advance. This entailed the unification (id. standardisation) of their tags (both their representation and their meaning), and their format or syntax. Second, to merge the results of the linguistic annotation tools operating at different levels, their respective annotation schemas had to be (a) made interoperable and (b) integrated. And third, in order for the resulting annotations to suit the Semantic Web, they had to be specified by means of an ontology-based vocabulary, and structured by means of ontology-based triples, as hinted above. Therefore, a new annotation scheme had to be devised, based both on ontologies and on this type of triples, which allowed for the combination and the integration of the annotations of any set of linguistic annotation tools. This annotation scheme was considered a fundamental part of the model proposed here, and its development was, accordingly, another major objective of the present work. All these goals, aims and objectives could be re-stated more clearly as follows: Goal 1: Development of a set of ontologies for the formalisation of the linguistic knowledge relating linguistic annotation. Sub-goal 1.1: Ontological formalisation of the EAGLES (1996a; 1996b) de facto standards for morphosyntactic and syntactic annotation, in a way that helps respect the triple structure recommended for annotations in these works (which is isomorphic to the triple structures used in the context of the Semantic Web). Sub-goal 1.2: Incorporation into this preliminary ontological formalisation of other existing standards and standard proposals relating the levels mentioned above, such as those currently under development within ISO/TC 37 (the ISO Technical Committee dealing with Terminology, which deals also with linguistic resources and annotations). Sub-goal 1.3: Generalisation and extension of the recommendations in EAGLES (1996a; 1996b) and ISO/TC 37 to the semantic level, for which no ISO/TC 37 standards have been developed yet. Sub-goal 1.4: Ontological formalisation of the generalisations and/or extensions obtained in the previous sub-goal as generalisations and/or extensions of the corresponding ontology (or ontologies). Sub-goal 1.5: Ontological formalisation of the knowledge required to link, combine and unite the knowledge represented in the previously developed ontology (or ontologies). Goal 2: Development of OntoTag’s annotation scheme, a standard-based abstract scheme for the hybrid (linguistically-motivated and ontological-based) annotation of texts. Sub-goal 2.1: Development of the standard-based morphosyntactic annotation level of OntoTag’s scheme. This level should include, and possibly extend, the recommendations of EAGLES (1996a) and also the recommendations included in the ISO/MAF (2008) standard draft. Sub-goal 2.2: Development of the standard-based syntactic annotation level of the hybrid abstract scheme. This level should include, and possibly extend, the recommendations of EAGLES (1996b) and the ISO/SynAF (2010) standard draft. Sub-goal 2.3: Development of the standard-based semantic annotation level of OntoTag’s (abstract) scheme. Sub-goal 2.4: Development of the mechanisms for a convenient integration of the three annotation levels already mentioned. These mechanisms should take into account the recommendations included in the ISO/LAF (2009) standard draft. Goal 3: Design of OntoTag’s (abstract) annotation architecture, an abstract architecture for the hybrid (semantic) annotation of texts (i) that facilitates the integration and interoperation of different linguistic annotation tools, and (ii) whose results comply with OntoTag’s annotation scheme. Sub-goal 3.1: Specification of the decanting processes that allow for the classification and separation, according to their corresponding levels, of the results of the linguistic tools annotating at several different levels. Sub-goal 3.2: Specification of the standardisation processes that allow (a) complying with the standardisation requirements of OntoTag’s annotation scheme, as well as (b) combining the results of those linguistic tools that share some level of annotation. Sub-goal 3.3: Specification of the merging processes that allow for the combination of the output annotations and the interoperation of those linguistic tools that share some level of annotation. Sub-goal 3.4: Specification of the merge processes that allow for the integration of the results and the interoperation of those tools performing their annotations at different levels. Goal 4: Generation of OntoTagger’s schema, a concrete instance of OntoTag’s abstract scheme for a concrete set of linguistic annotations. These linguistic annotations result from the tools and the resources available in the research group, namely • Bitext’s DataLexica (http://www.bitext.com/EN/datalexica.asp), • LACELL’s (POS) tagger (http://www.um.es/grupos/grupo-lacell/quees.php), • Connexor’s FDG (http://www.connexor.eu/technology/machinese/glossary/fdg/), and • EuroWordNet (Vossen et al., 1998). This schema should help evaluate OntoTag’s underlying hypotheses, stated below. Consequently, it should implement, at least, those levels of the abstract scheme dealing with the annotations of the set of tools considered in this implementation. This includes the morphosyntactic, the syntactic and the semantic levels. Goal 5: Implementation of OntoTagger’s configuration, a concrete instance of OntoTag’s abstract architecture for this set of linguistic tools and annotations. This configuration (1) had to use the schema generated in the previous goal; and (2) should help support or refute the hypotheses of this work as well (see the next section). Sub-goal 5.1: Implementation of the decanting processes that facilitate the classification and separation of the results of those linguistic resources that provide annotations at several different levels (on the one hand, LACELL’s tagger operates at the morphosyntactic level and, minimally, also at the semantic level; on the other hand, FDG operates at the morphosyntactic and the syntactic levels and, minimally, at the semantic level as well). Sub-goal 5.2: Implementation of the standardisation processes that allow (i) specifying the results of those linguistic tools that share some level of annotation according to the requirements of OntoTagger’s schema, as well as (ii) combining these shared level results. In particular, all the tools selected perform morphosyntactic annotations and they had to be conveniently combined by means of these processes. Sub-goal 5.3: Implementation of the merging processes that allow for the combination (and possibly the improvement) of the annotations and the interoperation of the tools that share some level of annotation (in particular, those relating the morphosyntactic level, as in the previous sub-goal). Sub-goal 5.4: Implementation of the merging processes that allow for the integration of the different standardised and combined annotations aforementioned, relating all the levels considered. Sub-goal 5.5: Improvement of the semantic level of this configuration by adding a named entity recognition, (sub-)classification and annotation subsystem, which also uses the named entities annotated to populate a domain ontology, in order to provide a concrete application of the present work in the two areas involved (the Semantic Web and Corpus Linguistics). 3. MAIN RESULTS: ASSESSMENT OF ONTOTAG’S UNDERLYING HYPOTHESES The model developed in the present thesis tries to shed some light on (i) whether linguistic annotation tools can effectively interoperate; (ii) whether their results can be combined and integrated; and, if they can, (iii) how they can, respectively, interoperate and be combined and integrated. Accordingly, several hypotheses had to be supported (or rejected) by the development of the OntoTag model and OntoTagger (its implementation). The hypotheses underlying OntoTag are surveyed below. Only one of the hypotheses (H.6) was rejected; the other five could be confirmed. H.1 The annotations of different levels (or layers) can be integrated into a sort of overall, comprehensive, multilayer and multilevel annotation, so that their elements can complement and refer to each other. • CONFIRMED by the development of: o OntoTag’s annotation scheme, o OntoTag’s annotation architecture, o OntoTagger’s (XML, RDF, OWL) annotation schemas, o OntoTagger’s configuration. H.2 Tool-dependent annotations can be mapped onto a sort of tool-independent annotations and, thus, can be standardised. • CONFIRMED by means of the standardisation phase incorporated into OntoTag and OntoTagger for the annotations yielded by the tools. H.3 Standardisation should ease: H.3.1: The interoperation of linguistic tools. H.3.2: The comparison, combination (at the same level and layer) and integration (at different levels or layers) of annotations. • H.3 was CONFIRMED by means of the development of OntoTagger’s ontology-based configuration: o Interoperation, comparison, combination and integration of the annotations of three different linguistic tools (Connexor’s FDG, Bitext’s DataLexica and LACELL’s tagger); o Integration of EuroWordNet-based, domain-ontology-based and named entity annotations at the semantic level. o Integration of morphosyntactic, syntactic and semantic annotations. H.4 Ontologies and Semantic Web technologies (can) play a crucial role in the standardisation of linguistic annotations, by providing consensual vocabularies and standardised formats for annotation (e.g., RDF triples). • CONFIRMED by means of the development of OntoTagger’s RDF-triple-based annotation schemas. H.5 The rate of errors introduced by a linguistic tool at a given level, when annotating, can be reduced automatically by contrasting and combining its results with the ones coming from other tools, operating at the same level. However, these other tools might be built following a different technological (stochastic vs. rule-based, for example) or theoretical (dependency vs. HPS-grammar-based, for instance) approach. • CONFIRMED by the results yielded by the evaluation of OntoTagger. H.6 Each linguistic level can be managed and annotated independently. • REJECTED: OntoTagger’s experiments and the dependencies observed among the morphosyntactic annotations, and between them and the syntactic annotations. In fact, Hypothesis H.6 was already rejected when OntoTag’s ontologies were developed. We observed then that several linguistic units stand on an interface between levels, belonging thereby to both of them (such as morphosyntactic units, which belong to both the morphological level and the syntactic level). Therefore, the annotations of these levels overlap and cannot be handled independently when merged into a unique multileveled annotation. 4. OTHER MAIN RESULTS AND CONTRIBUTIONS First, interoperability is a hot topic for both the linguistic annotation community and the whole Computer Science field. The specification (and implementation) of OntoTag’s architecture for the combination and integration of linguistic (annotation) tools and annotations by means of ontologies shows a way to make these different linguistic annotation tools and annotations interoperate in practice. Second, as mentioned above, the elements involved in linguistic annotation were formalised in a set (or network) of ontologies (OntoTag’s linguistic ontologies). • On the one hand, OntoTag’s network of ontologies consists of − The Linguistic Unit Ontology (LUO), which includes a mostly hierarchical formalisation of the different types of linguistic elements (i.e., units) identifiable in a written text; − The Linguistic Attribute Ontology (LAO), which includes also a mostly hierarchical formalisation of the different types of features that characterise the linguistic units included in the LUO; − The Linguistic Value Ontology (LVO), which includes the corresponding formalisation of the different values that the attributes in the LAO can take; − The OIO (OntoTag’s Integration Ontology), which  Includes the knowledge required to link, combine and unite the knowledge represented in the LUO, the LAO and the LVO;  Can be viewed as a knowledge representation ontology that describes the most elementary vocabulary used in the area of annotation. • On the other hand, OntoTag’s ontologies incorporate the knowledge included in the different standards and recommendations for linguistic annotation released so far, such as those developed within the EAGLES and the SIMPLE European projects or by the ISO/TC 37 committee: − As far as morphosyntactic annotations are concerned, OntoTag’s ontologies formalise the terms in the EAGLES (1996a) recommendations and their corresponding terms within the ISO Morphosyntactic Annotation Framework (ISO/MAF, 2008) standard; − As for syntactic annotations, OntoTag’s ontologies incorporate the terms in the EAGLES (1996b) recommendations and their corresponding terms within the ISO Syntactic Annotation Framework (ISO/SynAF, 2010) standard draft; − Regarding semantic annotations, OntoTag’s ontologies generalise and extend the recommendations in EAGLES (1996a; 1996b) and, since no stable standards or standard drafts have been released for semantic annotation by ISO/TC 37 yet, they incorporate the terms in SIMPLE (2000) instead; − The terms coming from all these recommendations and standards were supplemented by those within the ISO Data Category Registry (ISO/DCR, 2008) and also of the ISO Linguistic Annotation Framework (ISO/LAF, 2009) standard draft when developing OntoTag’s ontologies. Third, we showed that the combination of the results of tools annotating at the same level can yield better results (both in precision and in recall) than each tool separately. In particular, 1. OntoTagger clearly outperformed two of the tools integrated into its configuration, namely DataLexica and FDG in all the combination sub-phases in which they overlapped (i.e. POS tagging, lemma annotation and morphological feature annotation). As far as the remaining tool is concerned, i.e. LACELL’s tagger, it was also outperformed by OntoTagger in POS tagging and lemma annotation, and it did not behave better than OntoTagger in the morphological feature annotation layer. 2. As an immediate result, this implies that a) This type of combination architecture configurations can be applied in order to improve significantly the accuracy of linguistic annotations; and b) Concerning the morphosyntactic level, this could be regarded as a way of constructing more robust and more accurate POS tagging systems. Fourth, Semantic Web annotations are usually performed by humans or else by machine learning systems. Both of them leave much to be desired: the former, with respect to their annotation rate; the latter, with respect to their (average) precision and recall. In this work, we showed how linguistic tools can be wrapped in order to annotate automatically Semantic Web pages using ontologies. This entails their fast, robust and accurate semantic annotation. As a way of example, as mentioned in Sub-goal 5.5, we developed a particular OntoTagger module for the recognition, classification and labelling of named entities, according to the MUC and ACE tagsets (Chinchor, 1997; Doddington et al., 2004). These tagsets were further specified by means of a domain ontology, namely the Cinema Named Entities Ontology (CNEO). This module was applied to the automatic annotation of ten different web pages containing cinema reviews (that is, around 5000 words). In addition, the named entities annotated with this module were also labelled as instances (or individuals) of the classes included in the CNEO and, then, were used to populate this domain ontology. • The statistical results obtained from the evaluation of this particular module of OntoTagger can be summarised as follows. On the one hand, as far as recall (R) is concerned, (R.1) the lowest value was 76,40% (for file 7); (R.2) the highest value was 97, 50% (for file 3); and (R.3) the average value was 88,73%. On the other hand, as far as the precision rate (P) is concerned, (P.1) its minimum was 93,75% (for file 4); (R.2) its maximum was 100% (for files 1, 5, 7, 8, 9, and 10); and (R.3) its average value was 98,99%. • These results, which apply to the tasks of named entity annotation and ontology population, are extraordinary good for both of them. They can be explained on the basis of the high accuracy of the annotations provided by OntoTagger at the lower levels (mainly at the morphosyntactic level). However, they should be conveniently qualified, since they might be too domain- and/or language-dependent. It should be further experimented how our approach works in a different domain or a different language, such as French, English, or German. • In any case, the results of this application of Human Language Technologies to Ontology Population (and, accordingly, to Ontological Engineering) seem very promising and encouraging in order for these two areas to collaborate and complement each other in the area of semantic annotation. Fifth, as shown in the State of the Art of this work, there are different approaches and models for the semantic annotation of texts, but all of them focus on a particular view of the semantic level. Clearly, all these approaches and models should be integrated in order to bear a coherent and joint semantic annotation level. OntoTag shows how (i) these semantic annotation layers could be integrated together; and (ii) they could be integrated with the annotations associated to other annotation levels. Sixth, we identified some recommendations, best practices and lessons learned for annotation standardisation, interoperation and merge. They show how standardisation (via ontologies, in this case) enables the combination, integration and interoperation of different linguistic tools and their annotations into a multilayered (or multileveled) linguistic annotation, which is one of the hot topics in the area of Linguistic Annotation. And last but not least, OntoTag’s annotation scheme and OntoTagger’s annotation schemas show a way to formalise and annotate coherently and uniformly the different units and features associated to the different levels and layers of linguistic annotation. This is a great scientific step ahead towards the global standardisation of this area, which is the aim of ISO/TC 37 (in particular, Subcommittee 4, dealing with the standardisation of linguistic annotations and resources).

Plant regeneration from an endangered valuable cork oak tree by somatic embryogenesis.

Among the several applications of in vitro tissue culture techniques, the conservation of plant germplasm is one of the most widely used. The cork oak is one of the principal tree species in the Western Mediterranean región. Within this área, the Balearic Islands are considered to be a glacial refuge, and therefore a reservoir of genetic resources. A singular tree has been found in the small Minorca Island population. The haplotype of this tree is of Tyrrhenian origin, showing a past link between Minorca and Sardinia. Moreover, this tree do not bear a deletion within an ITS from ribosimic nuclear DNA, which is fairly common in many populations of this species, and indicates that ir may be the descendant of a very ancient population. This tree is currently in a precarious condition, and it has not produced acorns in the last years. Hence there is a clear need of vegetative propagation to conserve this genotype. We have previously developed methods to clone adult cork oak tres by somatic embryogenesis, and therefore the aim of the present work was to clone this singular tree. There braches from the corwn were collected in November 2004, and methods previously described were carried out. By February 2005 somatic embryogenesis was obtained from leaves of the tree with percentages on induction ranging from 17 to 54% depending on the branch, which may show a novel source of variation that requires further study. Spontaneously matured somatic embryos germinated at 46% in average, and the first somatic seedlings from the Alfavaret's cork oak tree were obtained. Therefore, this study shows one of the most relevant applications of somatic embryogenesis: the plant regeneration of valuable genotypes for the in situ and ex situ conservation of forest genetic resources.

Three dimensional (3D) microstructure-based modeling of interfacial decohesion in particle reinforced metal matrix composites

Modeling and prediction of the overall elastic–plastic response and local damage mechanisms in heterogeneous materials, in particular particle reinforced composites, is a very complex problem. Microstructural complexities such as the inhomogeneous spatial distribution of particles, irregular morphology of the particles, and anisotropy in particle orientation after secondary processing, such as extrusion, significantly affect deformation behavior. We have studied the effect of particle/matrix interface debonding in SiC particle reinforced Al alloy matrix composites with (a) actual microstructure consisting of angular SiC particles and (b) idealized ellipsoidal SiC particles. Tensile deformation in SiC particle reinforced Al matrix composites was modeled using actual microstructures reconstructed from serial sectioning approach. Interfacial debonding was modeled using user-defined cohesive zone elements. Modeling with the actual microstructure (versus idealized ellipsoids) has a significant influence on: (a) localized stresses and strains in particle and matrix, and (b) far-field strain at which localized debonding takes place. The angular particles exhibited higher degree of load transfer and are more sensitive to interfacial debonding. Larger decreases in stress are observed in the angular particles, because of the flat surfaces, normal to the loading axis, which bear load. Furthermore, simplification of particle morphology may lead to erroneous results.

Forest Biodiversity Assessment in Peruvian Andean Montane Cloud Forest

Cloud forests are unusual and fragile habitats, being one of the least studied and least understood ecosystems. The tropical Andean dominion is considered one of the most significant places in the world as rega rds biological diversity, with a very high level of endemism. The biodiversity was analysed in an isolated remnant area of a tropical montane cloud forest known as the ?Bosque de Neblina de Cuyas?, in the North of the Peruvian Andean range. Composition, structure and dead wood were measured or estimated. The values obtained were compared with other cloud forests. The study revealed a high level of forest biodiversity, although the level of biodiversity differs from one area to another: in the inner areas, where human pressure is almost inexistent, the biodiversity values increase. The high species richness and the low dominance among species bear testimony to this montane cloud forest as a real enclave of biodiversity.

Energy requirements in pressure irrigation systems

Modernization of irrigation schemes, generally understood as transformation of surface irrigation systems into pressure –sprinkler and trickle- irrigation systems, aims at, among others, improving irrigation efficiency and reduction of operation and maintenance efforts made by the irrigators. However, pressure irrigation systems, in contrast, carry a serious energy cost. Energy requirements depend on decisions taken on management strategies during the operation phase, which are conditioned by previous decisions taken on the design project of the different elements which compose the irrigation system. Most of the countries where irrigation activity is significant bear in mind that modernization irrigation must play a key role in the agricultural infrastructure policies. The objective of this study is to characterize and estimate the mean and variation of the energy consumed by common types of irrigation systems and their management possibilities. The work includes all processes involved from the diversion of water into irrigation specific infrastructure to water discharge by the emitters installed on the crop fields. Simulation taking into account all elements comprising the irrigation system has been used to estimate the energy requirements of typical irrigation systems of several crop production systems. It has been applied to extensive and intensive crop systems, such us extensive winter crops, summer crops and olive trees, fruit trees and vineyards and intensive horticulture in greenhouses. The simulation of various types of irrigation systems and management strategies, in the framework imposed by particular cropping systems, would help to develop criteria for improving the energy balance in relation to the irrigation water supply productivity.

Development of mathematical models to elaborate strategies, select alternatives and development of plans for adaptation of communities to climate change in different geographical areas including costs to implement it.

There is evidence that the climate changes and that now, the change is influenced and accelerated by the CO2 augmentation in atmosphere due to combustion by humans. Such ?Climate change? is on the policy agenda at the global level, with the aim of understanding and reducing its causes and to mitigate its consequences. In most countries and international organisms UNO (e.g. Rio de Janeiro 1992), OECD, EC, etc . . . the efforts and debates have been directed to know the possible causes, to predict the future evolution of some variable conditioners, and trying to make studies to fight against the effects or to delay the negative evolution of such. The Protocol of Kyoto 1997 set international efforts about CO2 emissions, but it was partial and not followed e.g. by USA and China . . . , and in Durban 2011 the ineffectiveness of humanity on such global real challenges was set as evident. Among all that, the elaboration of a global model was not boarded that can help to choose the best alternative between the feasible ones, to elaborate the strategies and to evaluate the costs, and the authors propose to enter in that frame for study. As in all natural, technological and social changes, the best-prepared countries will have the best bear and the more rapid recover. In all the geographic areas the alternative will not be the same one, but the model must help us to make the appropriated decision. It is essential to know those areas that are more sensitive to the negative effects of climate change, the parameters to take into account for its evaluation, and comprehensive plans to deal with it. The objective of this paper is to elaborate a mathematical model support of decisions, which will allow to develop and to evaluate alternatives of adaptation to the climatic change of different communities in Europe and Latin-America, mainly in especially vulnerable areas to the climatic change, considering in them all the intervening factors. The models will consider criteria of physical type (meteorological, edaphic, water resources), of use of the ground (agriculturist, forest, mining, industrial, urban, tourist, cattle dealer), economic (income, costs, benefits, infrastructures), social (population), politician (implementation, legislation), educative (Educational programs, diffusion) and environmental, at the present moment and the future. The intention is to obtain tools for aiding to get a realistic position for these challenges, which are an important part of the future problems of humanity in next decades.

Development of mathematical models to elaborate strategies, to select alternatives and the development of plans for the adaptation of communities to climate change in different geographical areas including costs to implement it

Climate change is on the policy agenda at the global level, with the aim of understanding and reducing its causes and to mitigate its consequences. In most of the countries and international organisms UNO, OECD, EC, etc … the efforts and debates have been directed to know the possible causes, to predict the future evolution of some variable conditioners, and trying to make studies to fight against the effects or to delay the negative evolution of such. Nevertheless, the elaboration of a global model was not boarded that can help to choose the best alternative between the feasible ones, to elaborate the strategies and to evaluate the costs. As in all natural, technological and social changes, the best-prepared countries will have the best bear and the more rapid recover. In all the geographic areas the alternative will not be the same one, but the model should help us to make the appropriated decision. It is essential to know those areas that are more sensitive to the negative effects of climate change, the parameters to take into account for its evaluation, and comprehensive plans to deal with it. The objective of this paper is to elaborate a mathematical model support of decisions, that will allow to develop and to evaluate alternatives of adaptation to the climatic change of different communities in Europe and Latin-America, mainly, in vulnerable areas to the climatic change, considering in them all the intervening factors. The models will take into consideration criteria of physical type (meteorological, edaphic, water resources), of use of the ground (agriculturist, forest, mining, industrial, urban, tourist, cattle dealer), economic (income, costs, benefits, infrastructures), social (population), politician (implementation, legislation), educative (Educational programs, diffusion), sanitary and environmental, at the present moment and the future.

Análisis del discurso del entrenador de baloncesto experto en competición

En el ámbito de la competición deportiva profesional, el entrenador es una figura clave dentro del equipo y afecta de manera significativa al rendimiento del mismo. El comportamiento del entrenador, las decisiones que tome durante el partido, sus formas, tiempos, etc. afectan a las actuaciones de los jugadores dentro de la pista y suponen un aspecto muy importante a tener en cuenta a la hora de analizar el rendimiento de los equipos en una competición. Los condicionantes de la competición, la urgencia en las decisiones, la incertidumbre de su cumplimiento, etc., afectan a su conducta verbal. Por tanto, debemos conocer algunos de los comportamientos que resultan más eficaces por parte del entrenador para conseguir el mayor rendimiento de su equipo durante el partido y a partir de ahí tratar de construir un modelo teórico sobre que requisitos debería cumplir esta conducta verbal, ya que creemos que es a través del análisis de la observación de una conducta en una situación real como se pueden establecer estos parámetros teóricos sobre la comunicación. Para ello realizamos un estudio de 6 casos de entrenadores expertos en los que observamos su comportamiento verbal durante 4 partidos para extraer una información que comparada con los estudios previos, determine si es posible o no, establecer un modelo mínimo común de comportamiento eficaz en competición. En cuanto al objeto de la observación en el estudio de los casos nos hemos centrado en el contenido de la información, el que, su significado y sólo de tipo verbal, ya que consideramos la comunicación no verbal como algo más sujeto a posibles interpretaciones, aspecto que no estudiamos. ABSTRACT In the area of the sports professional competition, the coach is a key figure inside the team and concerns in a significant way the performance of the same one. The behavior of the coach, the decisions that it takes during the game, his forms, times, etc. They concern the actions of the players inside the track and suppose a very important aspect to bear in mind at the moment of analyzing the performance of the teams in a competition. The determining ones of the competition, the urgency in the decisions, the uncertainty of his fulfillment, etc., they concern his verbal behavior. Therefore, we must know some of the behaviors that turn out to be more effective on the part of the coach to obtain the best performance of his team during the game and from there tries to construct a theoretical model on whom requirements it should fulfill this verbal behavior, since we believe that it is across the analysis of the observation of a conduct in a true situation since these theoretical parameters can be established on the communication. For it we realize a study of 6 cases of expert coaches in that we observe his verbal behavior during 4 games to extract information that compared with the previous studies, it determines if it is possible or not, establishes a minimal common model of effective behavior in competition. As for the object of the observation in the study of the cases we have centered on the content of the information, the fact that, his meaning and only of verbal type, since we consider the not verbal communication as slightly more subject to possible interpretations, aspect that we do not study.

Evaluación de los Proyectos de Fin de Carrera realizados por estudiantes de la ETSI de Montes en las Universidades del SUNEO, México

Desde el año 2008 hasta finales de 2012 se han publicado dieciséis proyectos de fin de carrera realizados por alumnos de la Escuela Técnica de Ingenieros de Montes en tres de las escuelas del Sistema de Universidades Estatales de Oaxaca (SUNEO), México que se han analizado en este estudio. Los proyectos son muy diversos donde se profundizan temáticas muy distintas, pero todos tienen un fondo en común: la gestión del medio ambiente y el desarrollo de las comunidades indígenas oaxaqueñas. Sin embargo es necesario y siempre enriquecedor, saber qué ha pasado con posterioridad a la publicación de dichos proyectos, en qué han quedado los esfuerzos de los estudiantes hoy ingenieros y de ambas universidades implicadas, las del SUNEO por un lado como universidades receptoras que acogieron a los estudiantes que guiaron en el desarrollo de los proyectos, y por otro lado la Universidad Politécnica de Madrid, que formó a los ahora ingenieros y que les apoyó económicamente para realizar estos trabajos. Esta evaluación es un reto dada la diversidad de los proyectos y las distintas fechas en que fueron realizados. Algunos de ellos son de publicación reciente y apenas han empezado a dar sus frutos, pero es posible prever qué consecuencias van a tener si estudiamos las acciones que se están tomando actualmente para sacar el máximo provecho de toda la información generada en beneficio de las comunidades. Algunos proyectos son directamente y potencialmente ejecutables, otros (la mayoría) son de investigación, pero ellos no significa que no puedan tener efectos positivos sobre el entorno. Las formas de evaluar el efecto de proyectos ejecutados están ya muy estandarizadas, pero sin embargo no es así para los de investigación. Este documento tiene también como objeto dar pautas para poder evaluar este tipo de proyectos así como documentar las buenas prácticas y los factores de fracaso para aumentar la probabilidad de que estos trabajos alcancen el mayor impacto positivo posible en el futuro. From 2008 to the present many projects have been published by students from ETSI Montes UPM which were developed in three of the University Schools in the State University System of Oaxaca (SUNEO), Mexico. Until the end of 2012, sixteen projects had been published and these have been analyzed and included in this study. The projects are very diverse, and they all explore different themes but they all have a common background: environmental management and development of Oaxacan indigenous communities. However it is necessary to know what happened after the publication of such projects, and to observe the impact of them. It has been a joint effort between the two universities, on the one hand the SUNEO Universities which have received, hosted and guided the development of projects, and on the other hand the Polytechnic University of Madrid, who trained the current engineers and financed them to undertake these jobs. This evaluation is a challenge due to the diversity of the projects and the different dates on which they were carried out; some of them were recently published and are just beginning to bear fruit, but it is possible to predict what kind of impact they will produce if we study the actions currently being undertaken in order to take full advantage of all the information generated for the benefit of communities. Some projects are directly and potentially executable, others (the majority) are research works, but this does not mean they cannot have an impact. The way to evaluate the impact of technical projects is already very standardized, but there is not one for the research ones yet. This document will also give guidelines to assess the impacts of such projects and will also document good practices and actions to avoid in order to increase the likelihood that these projects achieve the greatest positive impact.

Tips and tricks about financial ratios: how to anticipate unpleasant surprises

Following recent accounting and ethical scandals within the Telecom Industry like Gowex case, old cards are laid on the table: what kind of management and control are we doing on our businesses and what use do we give to the specific tools we have at our disposition? There are indicators, that on a very specific, concise and accurate manner, aside from brief, allow us to analyze and capture the complexity of a business and also they constitute an important support when making optimal decisions. These instruments or indicators show, a priori, all relevant data from a purely economic perspective, while there also exist, the possibility of including factors that are not of this nature strictly. For instance, there are indicators that take into account the customer?s satisfaction, the corporate reputation among others. Both kind of performance indicators form, together, an integral dashboard while the pure economic side of it could be considered as a basic dashboard. Based on DuPont?s methodology, we will be able to calculate the ROI (Return on Investment) of a company from the disaggregation of very useful and much needed indicators like the ROE (Return on Equity) or the ROA (Return on Assets); thereby, we will be able to get to know, to control and, hence, to optimize the company?s leverage level, its liquidity ratio or its solvency ratio, among others; as well as the yield we will be able to obtain if our decisions and management are optimal related to the bodies of assets. Bear in mind and make the most of the abovementioned management tools and indicators that we have at our disposition, allow us to act knowing our path and taking full responsibility, as well as, to obtain the maximum planned benefits, instead of leaving them to be casual. We will be able to avoid errors that can lead the company to an unfortunate and non-desirable situation and, of course, we will detect, way in advance, the actual needs of the business in terms of accounting and financial sanitation before irreversible situations are reached.

La historia del oso de las cavernas: vida y muerte de un animal desaparecido

El título de este libro «La historia del oso de las cavernas: vida y muerte de un animal desaparecido» no es una feliz ocurrencia. Es una traducción del libro escrito por el paleontólogo fmés BjomKurten (1924-88) de la Universidad de Helsinki: The cave bear story: life and death of a vanished animal (Columbia University Press 1976) que, junto con innumerables artículos científicos, fueron inspiración de mi trabajo de investigación. No llegué a conocerle personalmente pero mantuve con él una relación epistolar y me ofreció sugerencias interesantes e, incluso, material en préstamo, el año de su muerte. El título del libro es más largo ya que reconcoce la contribución del yacimiento de Amutxate a esta historia. Como editor de este libro creo que, además de la satisfacción que me ha producido su escritura y coordinación, llega el momento de echar la vista atrás, recordar tantos buenos/malos momentos. He decidido hablar de buenos/malos momentos porque la espeleología, sea en su faceta científica o en la deportiva, consiste en una sucesión de vivencias en un ambiente hosti 1 que culmina con la satisfacción que produce el descubrimiento. En 1966 se produjo un hecho que marcó mi futuro participando en las exploraciones como miembro del GEM (Grupo Espeleológico de Minas) encontré mis primeros fósiles en la cueva del Reguerillo, cerca de Madrid. Esta cueva la excavé en 1971-1976 y, en años posteriores trabajé en otras muchas: Arrikrutz (Oñati, Guipúzcoa), Sima de los Huesos (Atapuerca, Burgos), Troskaeta (Ataun, Guipúzcoa), Los Osos (Tella-sin, Huesca), Eirós (Triacastela, Lugo ), La Lucia (Quintanilla, Cantabria), Santa Isabel (Ranero, Vizcaya) y, finalmente, Amutxate en la Sierra de Aralar.

Máquinas o atmósferas: La estética de la energía en la arquitectura, 1750-2000 = From Machines to Atmospheres: The Aesthetics of Energy in Architecture, 1750-2000

La energía es ya un tema arquitectónico, pero su incorporación al proyecto ha sido hasta ahora fundamentalmente técnica, dando pie a una especie de funcionalismo ecológico cuyo destino es acaso repetir los errores de los viejos funcionalismos en su confianza de encontrar modos ‘objetivos’ de transmutar la energía en forma construida, pero sin que en tal proceso parezca haber hueco para mediaciones de tipo estético. Sin embargo, son precisamente tales mediaciones las que necesitan analizarse para que la adopción de los temas energéticos resulte fructífera en la arquitectura, y asimismo para dar cuenta de otras perspectivas complementarias —filosóficas, científicas, artísticas— que hoy forman el complejo campo semántico de la energía. Partiendo de la fecha de 1750 —que da comienzo simbólicamente al proceso de contaminaciones ‘modernas’ entre la arquitectura y otras disciplinas—, esta tesis analiza los diferentes modos con los que proyectos y edificios han expresado literal y analógicamente ciertos temas o ideales energéticos, demostrando la existencia de una ‘estética de la energía’ en la arquitectura y también de una tradición proyectual e intelectual sostenida en ella. Con este fin, se han seleccionados siete metáforas que vinculan tanto técnica como ideológicamente a la arquitectura con la energía: la metáfora de la máquina, asociada al ideal de movimiento y la autorregulación; las metáforas del arabesco, del cristal y del organismo, afines entre sí en su modo de dar cuenta del principio de la morfogénesis o energía creadora de la naturaleza; la metáfora de la actividad interna de los materiales; la metáfora del gradiente, que expresa la condición térmica y climática de la arquitectura, y, finalmente, la de la atmósfera que, recogiendo los sentidos anteriores, los actualiza en el contexto de la estética contemporánea. La selección de estas siete metáforas se ha llevado a cabo después de un barrido exhaustivo de la bibliografía precedente, y ha estructurado un relato cuyo método combina la perspectiva general —que permite cartografiar las continuidades históricas— con la cercana —que atiende a las problemas específicos de cada tema o metáfora—, complementándolas con una aproximación de sesgo iconográfico cuyo propósito es incidir en los vínculos que se dan entre lo ideológico y lo morfológico. El análisis ha puesto de manifiesto cómo detrás de cada una de estas metáforas se oculta un principio ideológico común —la justificación de la arquitectura desde planteamientos externos procedentes de la ciencia, la filosofía y el arte—, y cómo en cada uno de los casos estudiados las asimilaciones más fructíferas de la energía se han producido según mecanismos de mímesis analógica que inciden más en los procesos que en las formas que estos generan, y que en último término son de índole estética, lo cual constituye un indicio de los métodos de la arquitectura por venir. ABSTRACT Although it is already an architectural theme, the matter of incorporating energy into projects has up to now been mainly technical, giving rise to a kind of ecological functionalism which may be bound to old funcionalist mistakes in hopes of finding “objective” ways of transmuting energy into built forms without aesthetic considerations. However, it is precisely such considerations that need to be analyzed if the adoption of energy issues in architecture is to bear fruit and also to account for other complementary perspectives – philosophical, scientific, artistic – which today form the complex fabric of the energy semantic field. Beginning in 1750 – symbolic start of ‘modern’ contaminations between architecture and other disciplines –, this thesis analyzes the different ways in which projects and buildings have literally and analogically expressed certain subjects or ideals on energy, and demonstrates the existence of an “aesthetics of energy” in architecture, as well as of an intellectual and design tradition based on such aesthetics. For this purpose, seven metaphors are selected to link energy to architecture both technically and ideologically: the machine’s metaphor, associated with the ideal of mouvement and self-regulation; the arabesque, glass and the organism’s metaphors, which account for the morphogenesis principle, i.e. creative energy of nature; the metaphor linked to matter and the ideal of internal activity; the gradient’s metaphor, which expressed the thermal and climatic condition of architecture, and, finally, that of the atmosphere which, collecting the above meanings, updates them in the context of contemporary aesthetics. The selection of these seven metaphors was carried out after a thorough scan of the preceding literature, and has structured a reasoning that combines the overview method – which accounts for historical continuities – with the nearby one – which meets the specifics problems of each theme or metaphor –, both supplemented with an iconographic bias, the purpose of which is to visually express the links existing between the ideological and the morphological. So presented, the analysis shows how, behind each of these metaphors, lies a common ideological principle – the justification of architecture from scientific, philosophical and artistic “external” angles –, and how in each of the studied cases the most successful assimilation of energy were those produced by aesthetic mechanisms of analogical mimesis not focused in forms but in processes that generate them: an indication of the methods of architecture to come.

Contribución al estudio y clasificación de las funciones de implicación borrosas

La tesis doctoral "Contribución al estudio y clasificación de las funciones de implicación borrosas" constituye a la vez una revisión y un conjunto de aportaciones a la modelización de enunciados condicionales, o enunciados del tipo "Si P, entonces Q". Dentro del marco de la lógica borrosa, tradicionalmente, se considera que la mayor parte de las funciones de implicación, que modelizan los enunciados condicionales, deberían generalizar la implicación material booleana. En esta memoria se apoya el argumento de que la implicación material booleana no es siempre el modelo más adecuado para la modelización de los enunciados condicionales, por lo que se definen y estudian clases o grupos de funciones de implicación que se adecúen a las necesidades de cada caso de aplicación. Así pues, tras un capítulo introductorio, en el capítulo 2 se plantean clases de funciones de implicación que sirvan de apoyo en la definición de aplicaciones de carácter borroso más allá de las funciones de implicación borrosas derivadas de la implicación material booleana. Así se llega a la conclusión de que son necesarios, por lo menos, cuatro clases de funciones de implicación de las que se estudian sus propiedades. En el tercer capítulo se aborda el estudio de la verificación tanto de la regla del Modus Ponens como de la regla del Modus Tollens por parte de las funciones de implicación pertenecientes a cada una de las clases planteadas. Por último, en el capítulo 4 se presenta un estudio de los operadores citados como implicaciones borrosas en la literatura bajo el enfoque presentado en esta memoria, ampliándose estudios realizados por otros autores. ---ABSTRACT--- The Ph.D. Thesis "Contribution al estudio y clasificacion de las funciones de implication borrosas" is a revision and a set of contributions to the conditional statements or statements of the type "If P then Q" modelization. It has been usually considered in Fuzzy Logic, that implication functions that model conditional statements should generalize the boolean material implication. The present memory supports the argument that boolean material implication is not always the most appropiated model for conditional statements, so implication function groups or clusters are denned in order to fit in each application. Therefore, after an introductory chapter, in chapter 2 groups or clusters of implication functions are given in order to bear out fuzzy applications definitions further on from implication functions coming from boolean material implication. Then, it has been reached the conclusion that, at least, four types of implication functions are needed so their properties are studied.

Estudio de la fisuración en particiones verticales de yeso laminado, producidas por la deformación de forjados

Las exigencias de calidad, tanto en el ámbito de la rehabilitación como en el de las obras de nueva planta, obligan a evitar la fisuración de la tabiquería. Una de sus principales causas es la deformación excesiva de los forjados. Aunque en la mayoría de los casos no tiene efectos estructurales sino solamente estéticos, es necesario tomar precauciones para evitar la fisuración, pues es una de las patologías más frecuentes y en muchos casos motivo de reclamación de los usuarios. El aumento del consumo de los paneles de placa de yeso laminado y lana de roca para la realización de tabiquerías, justifica la necesidad de ahondar en el conocimiento del comportamiento y del mecanismo de fisuración de este material, pues hasta la fecha no se ha encontrado ningún trabajo especificamente dedicado al estudio del comportamiento en fractura de paneles sandwich de placa de yeso laminado y lana de roca en su plano. A la hora de abordar el estudio del comportamiento en fractura del material objeto de esta tesis, es preciso tener en cuenta que se trata de un material compuesto y, como tal, sus propiedades mecánicas y resistentes dependen en gran medida de las de sus componentes. Por tanto, para poder explicar el comportamiento en fractura del panel sandwich, habrá que estudiar también el de sus componentes. Por otro lado, se considera también muy útil disponer de una herramienta de calculo para la simulación de la fractura de paneles sandwich que sea predictiva. Este modelo hará posible facilitar el diseño de tabiquerías que no se fisure con este material, al poder relacionar las flechas que pueden tomar los forjados con su potencial fisuración. Para contrastar y validar un modelo de este tipo, es necesario disponer de suficientes datos experimentales del comportamiento en fractura del panel sandwich de placa de yeso laminado y lana de roca, que se puedan simular numericamente con el mismo. A partir de lo anteriormente expuesto se plantea, en primer lugar, una campaña experimental con el fin de obtener los parámetros necesarios para caracterizar el comportamiento en fractura de los paneles sandwich y sus componentes: placa de yeso laminado y lana de roca, estudiando también, su comportamiento en fractura en Modo Mixto, y el efecto del tamaño en los parámetros del panel. Por otro lado se propone un modelo de cálculo para la simulación de la fractura en Modo Mixto de paneles sandwich de placa de yeso laminado y lana de roca, comprobando la validez del modelo numérico a partir de los resultados experimentales obtenidos en la campaña de ensayos. Finalmente, se aplica el modelo para estudiar la fisuración de tabiquería realizada con el panel sandwich producida por la deformación de forjados unidireccionales realizados con viguetas de hormigón y bovedilla cerámica, por ser esta tipología la más usual en obras de edificación de viviendas. The quality requirements in terms of rehabilitation and new Works, force to prevent cracking on partitions and one of the main causes is the excessive deformation of the floor. In most of the cases, there are any structural damages, only aesthetic effects, but it is necessary to take precautions to avoid cracking because it is one of the most common diseases and in addition is the main reason of user’s complaints. The increased consumption of plasterboard panels and mineral wool used to build partitions, justifies the need to develop a deeper understanding of the cracking behaviour and mechanism, because by now, any specifically work dedicated to the study of fractures behaviour of sandwich plasterboard panels and rock wool has been found. When approaching the study of the fracture behaviour of the material it must bear in mind that we are referring to a composite material and as such, its mechanical and strength properties depend heavily on its components. Therefore, to explain the fracture behaviour of sandwich panels its components must be studied as well. On the other hand, it is also considered very useful to have a calculation tool to simulate the more likely fractures of the sandwich panel in order to predict it. This model used to perform simulations will enable the design of partitions built with these materials without cracks because it will relate the deflections in decks with its potential cracking. To contrast and validate this type of model, it is necessary and imperative to have enough experimental data of the sandwich plasterboard and rock wool fractures in order to enable its numerical simulation with it. On the basis of the above, the question arises firstly an experimental campaign in order to obtain the necessary parameters to characterize the cracking behaviour of sandwich panels and its components: plasterboard and rock wool, studying also its cracking behaviour in a mixed mode fracture and the effect of size parameters of the panel. Furthermore, a calculation model to simulate fractures in mixed mode of the sandwich panels made of plasterboard and rock wool is proposed in order to check the validity of the numerical model, based on experimental results obtained from the test campaign. Finally, this model is applied to study cracking on partitions built with sandwich panels resulting from the unidirectional floor’s deformations built with prestressed concrete beams and slab pottery pieces being this typology the most common one on residential buildings works.