Life cycle assessment as a policy-support tool: the case of taxis in the city of Madrid

This paper examined the potentialities of Life Cycle Assessment (LCA) as instrument for policy-support. To this respect, the adoption of an initiative within the Madrid Air Quality Plan (AQP) 2011–2015 regarding the substitution of diesel taxis with hybrid, natural gas and LPG alternatives was studied. Four different scenarios were elaborated, a business-as-usual scenario (BAU), the scenario of the AQP, and two extreme-situation scenarios: all-diesel (ADI) and all-ecologic (AEC). Impacts were characterized according to the ILCD methodology, focusing especially on climate change (CC) and photochemical ozone formation (PO). SimaPro 7.3 was used as analysis and inventory-construction tool. The results indicate that the shift to ecologic alternatives reduced impacts, especially those related to CC and PO. For the complete life cycle, reductions of 13% (CC) and 25% (PO) were observed for AQP against BAU (CC:1365 GgCO2, PO:13336 MgNMVOC). Deeper reductions were observed for AEC (CC:34%, PO:59%), while ADI produced slight increases in impacts if against BAU. The analysis of the use-phase revealed that the central and highest speed zones of the city benefit from the adoption of AQP. This is especially evident in zone 7, with reductions of 16% in CC and 31% in PO respectively against BAU (CCzone1:3443 kgCO2/veh·km, POzone7:11.1 kgNMVOC/veh·km).

Environmental analysis of a Concentrated Solar Power (CSP) plant hybridised with different fossil and renewable fuels

The environmental performance of a 50 MW parabolic trough Concentrated Solar Power (CSP) plant hybridised with different fuels was determined using a Life Cycle Assessment methodology. Six different scenarios were investigated, half of which involved hybridisation with fossil fuels (natural gas, coal and fuel oil), and the other three involved hybridisation with renewable fuels (wheat straw, wood pellets and biogas). Each scenario was compared to a solar-only operation. Nine different environmental categories as well as the Cumulative Energy Demand and the Energy Payback Time (EPT) were evaluated using Simapro software for 1 MWh of electricity produced. The results indicate a worse environmental performance for a CSP plant producing 12% of the electricity from fuel than in a solar-only operation for every indicator, except for the eutrophication and toxicity categories, whose results for the natural gas scenario are slightly better. In the climate change category, the results ranged between 26.9 and 187 kg CO2 eq/MWh, where a solar-only operation had the best results and coal hybridisation had the worst. Considering a weighted single score indicator, the environmental impact of the renewable fuels scenarios is approximately half of those considered in fossil fuels, with the straw scenario showing the best results, and the coal scenario the worstones. EPT for solar-only mode is 1.44 years, while hybridisation scenarios EPT vary in a range of 1.72 -1.83 years for straw and pellets respectively. The fuels with more embodied energy are biomethane and wood pellets.

Caracterización y análisis comparativo del comportamiento medioambiental de los materiales de aislamiento térmico utilizados en la envolvente del edificio, en función del sistema constructivo y de la situación geográfica

La construcción es uno de los causantes de mayor impacto ambiental y energético en el entorno. Por ello, los profesionales del sector deben empezar a cambiar la manera en la que diseñan la arquitectura, incorporando técnicas y parámetros sostenibles desde las primeras etapas del diseño, controlando la elección de los materiales y las soluciones constructivas. A través de las Declaraciones Ambientales de Producto (DAP) es posible conocer el perfil ambiental de los productos de la construcción, sin embargo, la mayoría de estos documentos solo poseen información de la etapa de producto (A1-A3) y de la etapa de fin de vida, contemplando solo un tipo de tratamiento (vertedero o incineración). Lo que propone esta investigación es generar información medioambiental del resto de las etapas del ciclo de vida relacionado con el producto, haciendo especial hincapié en la etapa de transporte (A4), puesta en obra (A5), transporte de obra a planta de tratamiento (C2) y etapa de fin de vida con vertedero e incineración. Para la realización de la investigación se ha generado un Inventario de Ciclo de Vida (ICV) con valores medios facilitados por las empresas. El ámbito de actuación es la península ibérica, considerándose un transporte en camión. La evaluación ambiental se ha realizado con la herramienta informática SimaPro (versión 7.3.3). Para los procesos que no han podido ser modelizados por falta de información, se ha recurrido a la base de datos Ecoinvent (versión 2.0). Las categorías de impacto analizadas son las contempladas en la UNE-EN ISO 15804+A1. Con esta investigación se propone una catalogación medioambiental del material de aislamiento térmico según los impactos asociados al transporte, puesta en obra y fin de vida del producto para que el prescriptor pueda escoger qué material es el más adecuado a incorporar en el proyecto, desde el punto de vista medioambiental. ABSTRACT _ Construction is one of the main causes of environmental and energy impacts in the environment. Therefore, the professionals of the sector should begin changing the way they design architecture, incorporating sustainable techniques and parameters from the first design stages, controlling the choice of materials and building solutions. It is possible to know the environmental profile of construction products through Environmental Product Declarations (EPD). However, most of these documents only provide information for the product stage (A1-A3) and the end-of-life stage, taking into account only one type of treatment (landfill or incineration). This research proposes the generation of environmental information for the rest of the life cycle stages related to the product, with particular emphasis on the transportstage (A4), construction installation (A5), transport from the construction site to the recycling facilities (C2) and end-of-life stage with landfill and incineration. A Life Cycle Inventory (LCI) has been generated for the development of the research, with mean values provided by the firms. The scope of action is the Iberian Peninsula, considering transport by lorry. The environmental assessment has been carried out with the SimaPro software (version 7.3.3). The Ecoinvent database (version 2.0) has been used for the processes that couldn’t be modelled due to lack of information. The impact categories analysed are those considered in standard UNE-EN ISO 15804+A1. This research proposes an environmental cataloguing of the thermal insulation material depending on the impacts associated with transport, construction installation and end-of-life of the product so that the prescriber might choose which material is the most suitable to implement in the project from an environmental point of view.