New methodology for the integration of biometric features in speaker recognition systems applied to security environments

La cuestión principal abordada en esta tesis doctoral es la mejora de los sistemas biométricos de reconocimiento de personas a partir de la voz, proponiendo el uso de una nueva parametrización, que hemos denominado parametrización biométrica extendida dependiente de género (GDEBP en sus siglas en inglés). No se propone una ruptura completa respecto a los parámetros clásicos sino una nueva forma de utilizarlos y complementarlos. En concreto, proponemos el uso de parámetros diferentes dependiendo del género del locutor, ya que como es bien sabido, la voz masculina y femenina presentan características diferentes que deberán modelarse, por tanto, de diferente manera. Además complementamos los parámetros clásicos utilizados (MFFC extraídos de la señal de voz), con un nuevo conjunto de parámetros extraídos a partir de la deconstrucción de la señal de voz en sus componentes de fuente glótica (más relacionada con el proceso y órganos de fonación y por tanto con características físicas del locutor) y de tracto vocal (más relacionada con la articulación acústica y por tanto con el mensaje emitido). Para verificar la validez de esta propuesta se plantean diversos escenarios, utilizando diferentes bases de datos, para validar que la GDEBP permite generar una descripción más precisa de los locutores que los parámetros MFCC clásicos independientes del género. En concreto se plantean diferentes escenarios de identificación sobre texto restringido y texto independiente utilizando las bases de datos de HESPERIA y ALBAYZIN. El trabajo también se completa con la participación en dos competiciones internacionales de reconocimiento de locutor, NIST SRE (2010 y 2012) y MOBIO 2013. En el primer caso debido a la naturaleza de las bases de datos utilizadas se obtuvieron resultados cercanos al estado del arte, mientras que en el segundo de los casos el sistema presentado obtuvo la mejor tasa de reconocimiento para locutores femeninos. A pesar de que el objetivo principal de esta tesis no es el estudio de sistemas de clasificación, sí ha sido necesario analizar el rendimiento de diferentes sistemas de clasificación, para ver el rendimiento de la parametrización propuesta. En concreto, se ha abordado el uso de sistemas de reconocimiento basados en el paradigma GMM-UBM, supervectores e i-vectors. Los resultados que se presentan confirman que la utilización de características que permitan describir los locutores de manera más precisa es en cierto modo más importante que la elección del sistema de clasificación utilizado por el sistema. En este sentido la parametrización propuesta supone un paso adelante en la mejora de los sistemas de reconocimiento biométrico de personas por la voz, ya que incluso con sistemas de clasificación relativamente simples se consiguen tasas de reconocimiento realmente competitivas. ABSTRACT The main question addressed in this thesis is the improvement of automatic speaker recognition systems, by the introduction of a new front-end module that we have called Gender Dependent Extended Biometric Parameterisation (GDEBP). This front-end do not constitute a complete break with respect to classical parameterisation techniques used in speaker recognition but a new way to obtain these parameters while introducing some complementary ones. Specifically, we propose a gender-dependent parameterisation, since as it is well known male and female voices have different characteristic, and therefore the use of different parameters to model these distinguishing characteristics should provide a better characterisation of speakers. Additionally, we propose the introduction of a new set of biometric parameters extracted from the components which result from the deconstruction of the voice into its glottal source estimate (close related to the phonation process and the involved organs, and therefore the physical characteristics of the speaker) and vocal tract estimate (close related to acoustic articulation and therefore to the spoken message). These biometric parameters constitute a complement to the classical MFCC extracted from the power spectral density of speech as a whole. In order to check the validity of this proposal we establish different practical scenarios, using different databases, so we can conclude that a GDEBP generates a more accurate description of speakers than classical approaches based on gender-independent MFCC. Specifically, we propose scenarios based on text-constrain and text-independent test using HESPERIA and ALBAYZIN databases. This work is also completed with the participation in two international speaker recognition evaluations: NIST SRE (2010 and 2012) and MOBIO 2013, with diverse results. In the first case, due to the nature of the NIST databases, we obtain results closed to state-of-the-art although confirming our hypothesis, whereas in the MOBIO SRE we obtain the best simple system performance for female speakers. Although the study of classification systems is beyond the scope of this thesis, we found it necessary to analise the performance of different classification systems, in order to verify the effect of them on the propose parameterisation. In particular, we have addressed the use of speaker recognition systems based on the GMM-UBM paradigm, supervectors and i-vectors. The presented results confirm that the selection of a set of parameters that allows for a more accurate description of the speakers is as important as the selection of the classification method used by the biometric system. In this sense, the proposed parameterisation constitutes a step forward in improving speaker recognition systems, since even when using relatively simple classification systems, really competitive recognition rates are achieved.

Thermally tunable polarization by nanoparticle plasmonic resonance in photonic crystal fibers

A photonic crystal fiber selectively filled with silver nanoparticles dispersed in polydimethylsiloxane has been numerically studied via finite elements analysis. These nanoparticles possess a localized surface plasmon resonance in the visible region which depends on the refractive index of the surrounding medium. The refractive index of polydimethylsiloxane can be thermally tuned leading to the design of polarization tunable filters. Filters found with this setup show anisotropic attenuation of the x-polarization fundamental mode around ?x = 1200dB/cm remarkably higher than the y-polarization mode. Moreover, high fiber birefringence and birefringence reversal is observed in the spectral region of the plasmon.

La Casa Domínguez. Alejandro de la Sota: Construir - Habitar

La Tesis Doctoral nace con una intensa vocación pedagógica. La hipótesis de trabajo se establece en torno a una cuestión de interés personal, un tema sobre el que se vertebran, desde el comienzo del doctorado, los diferentes cursos y trabajos de investigación: LA CASA DOMÍNGUEZ como paradigma de la dialéctica en la obra de Alejandro de la Sota. La clasificación de la realidad en categorías antagónicas determina un orden conceptual polarizado, una red de filiaciones excluyentes sobre las que Sota construye su personal protocolo operativo: la arquitectura intelectual o popular, experimental o tradicional, universal o local, ligera o pesada, elevada o enterrada, etc. Se propone el abordaje de una cuestión latente en el conjunto de la obra ‘sotiana’, desde la disección y el análisis de una de sus obras más pequeñas: la casa Domínguez. Se trata de una organización sin precedentes, que eleva la estrategia dialéctica al paroxismo: la vivienda se separa en dos estratos independientes, la zona de día, elevada, y la zona de noche, enterrada; cada uno de los estratos establece su propio orden geométrico y constructivo, su propio lenguaje y carácter, su propia identidad e incluso su propio presupuesto. Las relaciones entre interior y exterior se especializan en función de la actividad o el reposo, estableciéndose una compleja red de relaciones, algunas evidentes y otras celosamente veladas, entre los diferentes niveles. La estancia destinada a las tareas activas se proyecta como un objeto de armazón ligero y piel fría; la precisa geometría del cubo delimita la estancia vigilante sobre el paisaje conquistado. La ladera habitada se destina al reposo y se configura como una topografía verde bajo la que se desarrollan los dormitorios en torno a patios, grietas y lucernarios, generando un paisaje propio: la construcción del objeto frente a la construcción del lugar La casa Domínguez constituye uno de los proyectos menos estudiados, y por lo tanto menos celebrados, de la obra de Don Alejandro. Las publicaciones sucesivas reproducen la documentación gráfica junto a la memoria (epopeya) que el propio Sota compone para la publicación del proyecto. Apenas un par de breves textos críticos de Miguel Ángel Baldellou y, recientemente de Moisés Puente, abordan la vivienda como tema monográfico. Sin embargo, la producción de proyecto y obra ocupó a De la Sota un periodo no inferior a diez años, con casi cien planos dibujados para dos versiones de proyecto, la primera de ellas, inédita. El empeño por determinar hasta el último detalle de la ‘pequeña’ obra, conduce a Sota a controlar incluso el mobiliario interior, como hiciera en otras obras ‘importantes’ como el Gobierno Civil de Tarragona, el colegio mayor César Carlos o el edificio de Correos y Telecomunicaciones de León. La complicidad del cliente, mantenida durante casi cuarenta años, habilita el despliegue de una importante colección de recursos y herramientas de proyecto. La elección de la casa Domínguez como tema central de la tesis persigue por lo tanto un triple objetivo: en primer lugar, el abordaje del proyecto como paradigma de la dialéctica ‘sotiana’, analizando la coherencia entre el discurso de carácter heroico y la obra finalmente construida; en segundo lugar, la investigación rigurosa, de corte científico, desde la disección y progresivo desmontaje del objeto arquitectónico; y por último, la reflexión sobre los temas y dispositivos de proyecto que codifican la identificación entre la acción de construir y el hecho de habitar, registrando los aciertos y valorando con actitud crítica aquellos elementos poco coherentes con el orden interno de la propuesta. This doctoral thesis is the fruit of a profound pedagogical vocation. The central hypothesis was inspired by a question of great personal interest, and this interest has, since the very beginning of the doctorate, been the driving force behind all subsequent lines of research and investigation. The “Casa Domínguez” represents a paradigm of the dialectics found in the work of Alejandro de la Sota. The perception of reality as antagonistic categories determines a polarized conceptual order, a network of mutually excluding associations upon which Sota builds his own personal operative protocol: intellectual or popular architecture, experimental or traditional, universal or local, heavy or light, above or below ground, etc. Through the analysis and dissection of the “Casa Domínguez”, one of Sota’s smallest projects, an attempt is made to approach the underlying question posed in “Sotian” work as a whole. This is about organization without precedent, raising the strategic dialectics to levels of paroxysm. The house is divided into two separate levels, the day-time level above ground, and the lower night-time level beneath the surface of the ground. Each level has its own geometrical and stuctural order, its own language and character, its own identity and even has its own construction budget. The interaction between the two areas is centered on the two functions of rest and activity, and this in turn establishes a complex relationship network between both, which is sometimes self-evident, but at other times jealously guarded. The living area designed for daily activity is presented as an object of light structure and delicate skin; the precise geometry of the cube delimiting the ever watchful living area’s domain over the land it has conquered. A green topography is created on the slope below which lies an area adapted for rest and relaxation. Two bedrooms, built around patios, skylights and light crevices, generate an entirely independent environment: the construction of an object as opposed to the creation of a landscape. The “Casa Domínguez” project has been subject to much less scrutiny and examination than Don Alejandro’s other works, and is consequently less well-known. A succession of journals have printed the blueprint document together with a poetic description (epopee), composed by Sota himself, to mark the project’s publication. There has, however, scarcely been more than two brief critical appraisals, those by Miguel Ángel Baldellou and more recently by Moisés Puente, that have regarded the project as a monographic work. The project and works nevertheless occupied no less than ten years of De La Sota’s life, with over a hundred draft drawings for two separate versions of the project, the first of which remains unpublished. The sheer determination to design this “small” work in the most meticulous detail, drove Sota to manage and select its interior furniture, as indeed he had previously done with more “important” works like the Tarragona Civil Government, César Carlos College, or the Post Office telecommunications building in León. Client collaboration, maintained over a period of almost forty years, has facilitated an impressive array of the project’s tools and resources. The choice of “Casa Domínguez” as the central subject matter of this thesis, was made in pursuance of a triple objective: firstly, to approach the project as a paradigm of the “Sotian” dialectic, the analysis of the discourse between the heroic character and the finished building; secondly, a rigorous scientific investigation, and progressive disassembling and dissecting of the architectonic object; and finally, a reflection on aspects of the project and its technology which codify the identification between the action of construction and the reality of living, thus marking its achievements, whilst at the same time subjecting incoherent elements of the proposal’s established order to a critical evaluation.

El Terremoto de Lorca (2011) en el contexto de la peligrosidad y el riesgo sísmico en Murcia.

Este trabajo presenta un análisis de diferentes aspectos relacionados con el sismo principal del 11 de Mayo de 2011, con epicentro en las proximidades de Lorca, que abarcan desde el movimiento fuerte registrado hasta el daño observado en diferentes tipologías constructivas, contrastando todo ello con los resultados de estudios previos de peligrosidad y riesgo sísmico en la provincia de Murcia. La cuestión esencial que se plantea en el análisis es si tanto el movimiento como el daño entraban dentro de lo esperado o pueden considerarse anómalos en el marco del riesgo sísmico del sureste de España. A este respecto se hacen una serie de reflexiones y se extraen lecciones aprendidas del terremoto, que llevan a proponer recomendaciones de cara a la revisión de la Norma Sismorresistente Española, así como a definir medidas para la reducción del riesgo sísmico en la región. Abstract: An analysis of the different aspects related to the May 11th, 2011 Lorca earthquake is presented,covering recorded ground motions, damage observed in different building typologies, and contrasting these observations with previous results on seismic hazard and seismic risk obtained in the province of Murcia. The essential question addressed in the analysis is whether observed ground motions and physical damage can be considered as expected or as anomalous in the frame of seismic risk in southeastern Spain. In this respect, a number of reflections are carried out and several learned lessons from the earthquake are extracted, which leads to the proposal of different recommendations for the future revision of the Spanish earthquake-resistant provisions, as well as for defining risk reduction measurements in the region.

Development of a genre-dependent TTS system with cross-speaker speaking-style transplantation

One of the biggest challenges in speech synthesis is the production of contextually-appropriate naturally sounding synthetic voices. This means that a Text-To-Speech system must be able to analyze a text beyond the sentence limits in order to select, or even modulate, the speaking style according to a broader context. Our current architecture is based on a two-step approach: text genre identification and speaking style synthesis according to the detected discourse genre. For the final implementation, a set of four genres and their corresponding speaking styles were considered: broadcast news, live sport commentaries, interviews and political speeches. In the final TTS evaluation, the four speaking styles were transplanted to the neutral voices of other speakers not included in the training database. When the transplanted styles were compared to the neutral voices, transplantation was significantly preferred and the similarity to the target speaker was as high as 78%.

Lithogeochemistry and fluid flow in the epithermal Veta Rublo base metal-silver deposit, Chonta Mine (Huancavelica, Perú)

The Chonta Mine (75º00’30” W & 13º04’30”S, 4495 to 5000 m absl), owned by Compañía Minera Caudalosa, operates a polymetallic Zn-Pb-Cu-Ag vein system of the low sulphidation epithermal type, hosted by cenozoic volcanics of dacitic to andesitic composition (Domos de Lava Formation). Veta Rublo, one of the main veins of the system, is worked underground to nearly 300 m. It strikes 60-80º NE and dips 60-70º SE; its width varies between 0.30 and 2.20m, and it crops out along 1 km, but is continued along strike by other veins, as Veta Caudalosa, for some 5 km. Typical metal contents are 7% Zn, 5% Pb, 0.4% Cu and 3 oz/t Ag, with quartz, sericite, sphalerite, galena, pyrite, chalcopyrite, fahlore as main minerals, and minor carbonate and sulphosalts.

Laser ablation modelling of aluminium, silver and crystalline silicon for applications in photovoltaic technologies

Laser material processing is being extensively used in photovoltaic applications for both the fabrication of thin film modules and the enhancement of the crystalline silicon solar cells. The two temperature model for thermal diffusion was numerically solved in this paper. Laser pulses of 1064, 532 or 248 nm with duration of 35, 26 or 10 ns were considered as the thermal source leading to the material ablation. Considering high irradiance levels (108–109 W cm−2), a total absorption of the energy during the ablation process was assumed in the model. The materials analysed in the simulation were aluminium (Al) and silver (Ag), which are commonly used as metallic electrodes in photovoltaic devices. Moreover, thermal diffusion was also simulated for crystalline silicon (c-Si). A similar trend of temperature as a function of depth and time was found for both metals and c-Si regardless of the employed wavelength. For each material, the ablation depth dependence on laser pulse parameters was determined by means of an ablation criterion. Thus, after the laser pulse, the maximum depth for which the total energy stored in the material is equal to the vaporisation enthalpy was considered as the ablation depth. For all cases, the ablation depth increased with the laser pulse fluence and did not exhibit a clear correlation with the radiation wavelength. Finally, the experimental validation of the simulation results was carried out and the ability of the model with the initial hypothesis of total energy absorption to closely fit experimental results was confirmed.

Laser induced forward transfer of silver pastes for printing of fingers in c-si cells.

The main objective of this work is to adapt the Laser Induced Forward Techniques (LIFT), a well- known laser direct writing technique for material transfer, to define metallic contacts (fingers and busbars) onto c-Si cells. The silver paste (with viscosity around 30-50 kcPs) is applied over a glass substrate using a coater. The thickness of the paste can be control changing the deposit parameters. The glass with the silver paste is set at a controlled gap over the c-Si cell. A solid state pulsed laser (532 nm) is focused at the glass/silver interface producing a droplet of silver that it is transferred to the c-Si cell. A scanner is used to print lines. The process parameters (silver paste thickness, gap and laser parameters -spot size, pulse energy and overlapping of pulses) are modified and the morphology of the lines is studied using confocal microscopy. Long lines are printed and the uniformity (in thickness and height) is studied. Some examples of metallization of larger areas (up to 10 cm x 10 cm) are presented.