Correlation Between Processing Conditions, Microstructure and Mechanical Behavior in Regenerated Silkworm Silk Fibers

Regenerated silkworm fibers spun through a wet-spinning process followed by an immersion postspinning drawing step show a work to fracture comparable with that of natural silkworm silk fibers in a wide range of spinning conditions. The mechanical behavior and microstructure of these high performance fibers have been characterized, and compared with those fibers produced through conventional spinning conditions. The comparison reveals that both sets of fibers share a common semicrystalline microstructure, but significant differences are apparent in the amorphous region. Besides, high performance fibers show a ground state and the possibility of tuning their tensile behavior. These properties are characteristic of spider silk and not of natural silkworm silk, despite both regenerated and natural silkworm silk share a common composition different from that of spider silk.

Mechanical behaviour and formation process of silkworm silk gut

High performance silk fibers were produced directly from the silk glands of silkworms ("Bombyx mori") following an alternative route to natural spinning. This route is based on a traditional procedure that consists of soaking the silk glands in a vinegar solution and stretching them by hand leading to the so called silkworm guts. Here we present, to the authors’ best knowledge, the first comprehensive study on the formation, properties and microstructure of silkworm gut fibers. Comparison of the tensile properties and microstructural organization of the silkworm guts with those of naturally spun fibers allows gain of a deeper insight into the mechanisms that lead to the formation of the fiber, as well as the relationship between the microstructure and properties of these materials. In this regard, it is proved that an acidic environment and subsequent application of tensile stress in the range of 1000 kPa are sufficient conditions for the formation of a silk fiber.

Ecotoxicology of pesticides on natural enemies of olive groves. Potential of ecdysone agonists for controlling Bactrocera oleae (Rossi) (Diptera: Tephritidae)

Pesticide applications are still one of the most common control methods against the main olive grove pests and diseases: the olive fruit fly, Bactrocera oleae (Rossi), the olive moth, Prays oleae (Bernard), the black scale, Saissetia oleae (Olivier), and the olive leaf spot, caused by the fungus Spilocaea oleagina Fries. However, and because the new pesticide legislation is aimed at an integrated pest and disease management, it is still important to evaluate and to know the ecotoxicology of pesticides on the natural enemies of the different agrosystems. A part of this work has been focusses on evaluating the direct and indirect effects of kaolin particle films and two copper-based products (Bordeaux mixture and copper oxychloride) through different laboratory, extended laboratory and semi-field experiments. Two natural enemies have been chosen: Psyttalia concolor (Szèpligeti), a parasitoid of the olive fruit fly, and Chilocorus nigritus (F.), predator of Diaspididae. This predator has been used instead of C. bipustulatus (L.), which is the species found in olive orchards. Kaolin mainly acts as a repellent of insects and/or as an oviposition deterrent. It is used in olive groves to control the olive fruit fly and the olive moth. Copper is applied against fungal and bacterial diseases. In olive groves it is used against the olive leaf spot and other diseases. No statistical differences were found in any of the experiments performed, compared to the controls, except when the oral toxicity of the products was evaluated on P. concolor females. In this case, kaolin and copper oxychloride caused a higher mortality 72 hours after the treatments, and both kaolin and the two copper formulations decreased females’ life span. Reproductive parameters were only negatively affected when kaolin was ingested. Apart from these experiments, due to the uncommon mode of action of kaolin, two extra experiments were carried out: a dual choice and a no-choice experiment. In this case, both P. concolor females and C. nigritus adults showed a clear preference for the untreated surfaces when they had the possibility of choosing between a treated surface and an untreated one. When there was no choice, no statistical differences were found between the treatments and the controls. Furthermore, the efficacy and the selectivity of three insect growth regulators (methoxyfenozide, tebufenozide and RH-5849) on B. oleae and P. concolor, respectively, have also been evaluated. In addition to laboratory experiments to evaluate the toxicity of the insecticides, also molecular approaches were used. RNA of both insects was isolated. cDNA was subsequently synthesized and the complete sequences of the ligand biding domain (LBD) of the ecdysone receptor of each insect were then determined. Afterwards the three dimensional structures of both LBDs were constructed. Finally, the docking of the insecticide molecules in the cavity delineated by the 12 α-helix that composed the LBD was performed. Both toxicity assays and molecular docking approaches showed that either methoxyfenozide or tebufenozide had no negative effects nor on B. oleae nor on P. concolor. In contrast, RH-5849 had no deleterious effect to the parasitoid but decreased olive fruit fly adults’ life span, especially when they were in contact with the fresh residue of the insecticide applied on a glass surface. The docking study of RH-5849 molecule has shown a very light hindrance with the wall of the LBD pocket. This means that this molecule could more or less adjust in the cavity. Thus, searching of new insecticides for controlling the olive fruit fly could be based on the basic lead structure of RH-5849 molecule.

Minor ampullate silks from Nephila and Argiope spiders: tensile properties and microstructural characterization

The mechanical behavior and microstructure of minor ampullate gland silk (miS) of two orb-web spinning species, Argiope trifasciata and Nephila inaurata, were extensively characterized, enabling detailed comparison with other silks. The similarities and differences exhibited by miS when compared with the intensively studied major ampullate gland silk (MAS) and silkworm (Bombyx mori) silk offer a genuine opportunity for testing some of the hypotheses proposed to correlate microstructure and tensile properties in silk. In this work, we show that miSs of different species show similar properties, even when fibers spun by spiders that diverged over 100 million years are compared. The tensile properties of miS are comparable to those of MAS when tested in air, significantly in terms of work to fracture, but differ considerably when tested in water. In particular, miS does not show a supercontraction effect and an associated ground state. In this regard, the behavior of miS in water is similar to that of B. mori silk, and it is shown that the initial elastic modulus of both fibers can be explained using a common model. Intriguingly, the microstructural parameters measured in miS are comparable to those of MAS and considerably different from those found in B. mori. This fact suggests that some critical microstructural information is still missing in our description of silks, and our results suggest that the hydrophilicity of the lateral groups or the large scale organization of the sequences might be routes worth exploring.

The variability and interdependence of spider viscid line tensile properties

True stress-true strain curves of naturally spun viscid line fibers retrieved directly from the spiral of orb-webs built by Argiope trifasciata spiders were measured using a novel methodology. This new procedure combines a method for removing the aqueous coating of the fibers and a technique that allows the accurate measurement of their cross sectional area. Comparison of the tensile behaviour of different samples indicates that naturally spun viscid lines show a large variability, comparable to that of other silks, such as major ampullate gland silk and silkworm silk. Nevertheless, application of a statistical analysis allowed identifying two independent parameters that underlie the variability and characterize the observed range of true stress-true strain curves. Combination of this result with previous mechanical and microstructural data suggested the assignment of these two independent effects to the degree of alignment of the protein chains and to the local relative humidity which, in turn, depends on the composition of the viscous coating and on the external environmental conditions.

Improving Optical Performance of Concentrator Cells by Means of a Deposited Nanopattern Layer

Multijunction solar cells (MJSC) use anti-reflective coatings (ARC) to minimize Fresnel reflection losses for a family of light incidence angles. These coatings adapt the refractive index of the cell to that of the surrounding medium. Patterns with sizes in the range of the light wavelength can be used to further reduce reflections through diffraction. Transparent nanopatterns with a gradual profile, called moth-eye nanostructures, can adapt the refractive index of the optical interfaces (often with n∼1.5) used to encapsulate concentrator solar cells to that of the air (n air∼1). Here we show the effect of a nanometric moth-eye ARC with a round motif deposited on commercial MJSC that achieves short-circuit current (I SC) gains greater than 2% at normal incidence and even higher in the case of tilted illumination. In this work, MJSC with different moth-eye ARC are characterized under quantum efficiency (QE) as well as under concentrated illumination I-V in order to assess their potential. Simulations based on coupled wave analysis (RCWA) are used to fit the experimental results with successful results.