La geoquímica de los sedimentos de llanuras de inundación como guía para la valoración ambiental en España

En la presente tesis se estudian los contenidos geoquímicos de los sedimentos de llanura de inundación en diversas cuencas fluviales seleccionadas con el objetivo de contribuir a un mejor conocimiento de sus condiciones medioambientales. En cada cuenca, se ha muestreado un perfil vertical de llanura de inundación, dividiéndolo en tramos que generalmente corresponden a diferentes episodios de inundación. Estos sedimentos se depositan durante los episodios de crecidas una vez que la corriente sobrepasa los límites del canal. Se caracterizan normalmente por tener un tamaño de grano fino y una estructura en capas horizontales que corresponden a los sucesivos episodios de inundación. Muestran dos ventajas principales con respecto a otros medios de muestreo en geoquímica como suelos o sedimentos de corriente: • Pueden almacenar sedimento antiguo así como actual, con lo que se puede estudiar la historia geoquímica de una zona específica en un mismo punto de muestreo (perfil vertical). • Los sedimentos de llanuras de inundación son capaces de caracterizar grandes áreas de drenaje. El origen de los sedimentos es más diverso que en el sedimento de corriente, debido a las mayores áreas de donde proceden las aguas de las avenidas. Las cuencas han sido seleccionadas según las actividades antropogénicas que en ellas se llevan a cabo, en concreto, actividades urbanas e industriales, minería y agricultura. Así mismo, se han estudiado, como referencia, dos cuencas donde no se espera encontrar ningún tipo de actividad contaminante. Una vez hecha la selección, los sedimentos aluviales de las cuencas se han estudiado cuidadosamente para asegurar que no existen depósitos de acreción lateral en el punto seleccionado. Posteriormente se ha procedido al muestreo del perfil vertical. Las muestras han sido analizadas mediante ICP-MS (ataque total) e INAA para conocer los contenidos totales de los elementos traza y mayoritarios. Los análisis de la fracción extraíble se han llevado a cabo mediante ICP-MS (ataque con agua regia). Así mismo, algunas muestras seleccionadas han sido sometidas a una extracción secuencial para un estudio más detallado. La presencia de materia orgánica ha sido estimada mediante el análisis de Carbono Orgánico Total (TOC). Finalmente, se ha llevado a cabo un análisis de isótopos de Pb en muestras escogidas en los perfiles, con el objetivo de hacer una evaluación ambiental. Los contenidos metálicos aumentan hacia la superficie en algunos de los perfiles, mientras en otros muestran una distribución muy constante exceptuando algún nivel específico con un aumento de los contenidos de la mayoría de los metales. Ha sido posible determinar la influencia de las actividades antropogénicas en algunos de los perfiles. Aquellos que pertenecen a cuencas mineras, urbanas o industrializadas muestran generalmente altos contenidos en elementos metálicos. Es el caso de los perfiles muestreados en los ríos Odiel y Tinto, Besaya, Besós y Manzanares. Algunos de estos perfiles pueden incluso correlacionarse con periodos de tiempo en los que ha tenido lugar una actividad antropogénica más intensa. Los perfiles que mejor se correlacionan con la actividad antropogénica de la cuenca son el perfil de Rivas en el río Manzanares (Madrid), que refleja un crecimiento de la contaminación producida por las actividades urbana e industrial en las últimas décadas, y el río Tinto, que muestra un crecimiento llamativo de los contenidos en su mayoría metálicos que puede estar relacionado con el incremento de la actividad minera que tuvo lugar hace aproximadamente 125 años. El análisis de los isótopos de Pb ha resultado ser una herramienta útil en la evaluación ambiental de estos sedimentos. Con este estudio y mediante la comparación con fuentes naturales y antropogénicas, ha sido posible diferenciar las muestras afectadas por diferentes fuentes de plomo, así como detectar las más afectadas antropogénicamente. ABSTRACT The geochemical composition of overbank sediments of some selected river basins is studied in this thesis in order to contribute to a better knowledge of the environmental conditions surrounding them. In each basin a vertical overbank profile has been sampled, dividing it into stretches that usually correspond to different flood events. The overbank sediments are those deposited during a flood event once the flow spills over the channel banks. They are usually characterized by a very fine grain size and a structure of horizontal layers, which correspond to successive flood events. These sediments show two main advantages regarding other sampling media in geochemistry, like soils or stream sediments: • They can store sediment deposited in the past as well as in current times, so that the history of a specific location can be studied at the very same point (vertical profile). • The overbank sediments are able to characterize a large drainage area. The origin of the sediment is wider than in the stream sediments due to the larger areas where the flood water comes from. The basins have been selected depending on the anthropogenic activities developed in them, namely, urban and industrial activities, mining activities and agricultural activities. As well, two pristine basins have been studied as a reference. Afterwards, the alluvial sediments in the basins have been carefully studied in order to sample a vertical profile and make sure that lateral accretion materials are not present in the profile. The samples have been analysed by ICP-MS (total digestion) and INAA to know the total contents of trace and major elements. Analysis of the mobile fraction has been carried out by ICP-MS (aqua regia); as well some of the samples have been subjected to sequential extraction for a more detailed study. The presence of organic matter has been estimated by the analysis of the Total Organic Carbon (TOC). Finally, a lead isotope analysis of some of the samples in the profiles was carried out in order to make an environmental assessment. Metal contents grow towards the surface in some of the profiles, while others show a very steady distribution, except for some of them with a growth of most of the metals in a specific level. XI It has been possible to determine the influence of the anthropogenic activities in some of the profiles. The ones that belong to mining and urban or industrialized basins show generally high contents of metal elements. This is the case of the profiles sampled in the Odiel and Tinto Rivers, the Besaya River, the Besós River and the Manzanares River. Some of these profiles can even correlate with the periods of time when a more intense activity in their respective basins has taken place. The profiles which best correlate with the anthropogenic activity are the Rivas profile in the Manzanares River, which reflects a growth of the pollution produced by urban and industrial activities in the city of Madrid in the last decades and the Tinto profile, which shows a very dramatic growth of the elemental contents (mostly metals) which can be related to the increase of the mining activities that took place in the last 125 years. The analysis of lead isotopes has turned out to be a powerful tool in the environmental assessment in this type of sediments. With this study and through the comparison with natural and anthropogenic sources, it has been possible to determine samples affected by different sources of lead and to detect the most anthropogenicaly affected ones.

Diseño de un equipo experimental para el estudio de emisiones producidas durante procesos de autocombustión de sólidos

El objetivo de este proyecto es desarrollar un equipo para la realización de un ensayo de emisión de gases. Con esto se pretende simplificar el ensayo de calentamiento de sólidos y emisión de gases y hacerlo más fiable. Para la realización de este proyecto se utilizo un método de ensayo más rudimentario pero también eficaz. Así mismo se analizara el fenómeno de la autocombustión y las propiedades de distintos tipos de biomasa, en concreto dos tipos: astillas de madera y pellets de madera. Las propiedades que son caso de estudio son: las emisiones de gases que se producen durante el proceso de autocombustión; y las temperaturas de inflamación en capa a diferentes tamaños de grano y grosores de capa. Para analizar las propiedades de las muestras de biomasa se realizaran dos tipos de ensayos: ensayos de extracción de gases, y ensayos de temperatura mínima de inflamación en capa. Abstract: The main object of this Project is to develop an equipment to simplify our gas emissions test. During this project a more elementary method was used, however this method is extremely efficient. Also the self-heating phenomenon will be analyzed and several kinds of biomass properties, specifically two: wood chops and wood pellets. The properties that will be analyzed are: gas emissions during the self-heating process; and layer inflammation temperatures at several grain size and layer thickness. The biomass properties will be analyzed with two different tests: gas extraction tests, and TIMc.

Toxicity of ZnO nanoparticles, ZnO bulk and ZnCl2 on earthworms in a spiked natural soil and toxicological effects of leachates on aquatic organisms

The present study assessed the uptake and toxicity of ZnO nanoparticles (NPs), ZnO bulk, and ZnCl2 salt in earthworms in spiked agricultural soils. In addition, the toxicity of aqueous extracts to Daphnia magna and Chlorella vulgaris was analyzed to determine the risk of these soils to the aquatic compartment. We then investigated the distribution of Zn in soil fractions to interpret the nature of toxicity. Neither mortality nor differences in earthworm body weight were observed compared with the control. The most sensitive end point was reproduction. ZnCl2 was notably toxic in eliminating the production of cocoons. The effects induced by ZnO-NPs and bulk ZnO on fecundity were similar and lower than those of the salt. In contrast to ZnO bulk, ZnO-NPs adversely affected fertility. The internal concentrations of Zn in earthworms in the NP group were greater than those in the salt and bulk groups, although bioconcentration factors were consistently <1. No relationship was found between toxicity and internal Zn amounts in earthworms. The results from the sequential extraction of soil showed that ZnCl2 displayed the highest availability compared with both ZnO. Zn distribution was consistent with the greatest toxicity showed by the salt but not with Zn body concentrations. The soil extracts from both ZnO-NPs and bulk ZnO did not show effects on aquatic organisms (Daphnia and algae) after short-term exposure. However, ZnCl2 extracts (total and 0.45-μm filtered) were toxic to Daphnia.

Calculation Methodology and Fabrication Procedures for Particle Accelerator Strip-Line Kickers: Application to the CTF3 Combiner Ring Extraction Kicker and TL2 Tail Clippers

A particle accelerator is any device that, using electromagnetic fields, is able to communicate energy to charged particles (typically electrons or ionized atoms), accelerating and/or energizing them up to the required level for its purpose. The applications of particle accelerators are countless, beginning in a common TV CRT, passing through medical X-ray devices, and ending in large ion colliders utilized to find the smallest details of the matter. Among the other engineering applications, the ion implantation devices to obtain better semiconductors and materials of amazing properties are included. Materials supporting irradiation for future nuclear fusion plants are also benefited from particle accelerators. There are many devices in a particle accelerator required for its correct operation. The most important are the particle sources, the guiding, focalizing and correcting magnets, the radiofrequency accelerating cavities, the fast deflection devices, the beam diagnostic mechanisms and the particle detectors. Most of the fast particle deflection devices have been built historically by using copper coils and ferrite cores which could effectuate a relatively fast magnetic deflection, but needed large voltages and currents to counteract the high coil inductance in a response in the microseconds range. Various beam stability considerations and the new range of energies and sizes of present time accelerators and their rings require new devices featuring an improved wakefield behaviour and faster response (in the nanoseconds range). This can only be achieved by an electromagnetic deflection device based on a transmission line. The electromagnetic deflection device (strip-line kicker) produces a transverse displacement on the particle beam travelling close to the speed of light, in order to extract the particles to another experiment or to inject them into a different accelerator. The deflection is carried out by the means of two short, opposite phase pulses. The diversion of the particles is exerted by the integrated Lorentz force of the electromagnetic field travelling along the kicker. This Thesis deals with a detailed calculation, manufacturing and test methodology for strip-line kicker devices. The methodology is then applied to two real cases which are fully designed, built, tested and finally installed in the CTF3 accelerator facility at CERN (Geneva). Analytical and numerical calculations, both in 2D and 3D, are detailed starting from the basic specifications in order to obtain a conceptual design. Time domain and frequency domain calculations are developed in the process using different FDM and FEM codes. The following concepts among others are analyzed: scattering parameters, resonating high order modes, the wakefields, etc. Several contributions are presented in the calculation process dealing specifically with strip-line kicker devices fed by electromagnetic pulses. Materials and components typically used for the fabrication of these devices are analyzed in the manufacturing section. Mechanical supports and connexions of electrodes are also detailed, presenting some interesting contributions on these concepts. The electromagnetic and vacuum tests are then analyzed. These tests are required to ensure that the manufactured devices fulfil the specifications. Finally, and only from the analytical point of view, the strip-line kickers are studied together with a pulsed power supply based on solid state power switches (MOSFETs). The solid state technology applied to pulsed power supplies is introduced and several circuit topologies are modelled and simulated to obtain fast and good flat-top pulses.

Identification procedure of mealy apples by instrumental means. Extraction of storage features.

Mealiness is a negative attribute of sensory texture that combines the sensation of a disaggregated tissue with the sensation of lack of juiciness. Since January 1996, a wide EC Project entitled : "Mealiness in fruits. Consumers perception and means for detection'" is being carried out. Within it, three sensory panels have been trained at : the Institute of Food Research (IFR, United Kingdom), the Instituto de Agroquímica y Tecnología de los Alimentos (IATA, Spain) and the Institut voor Agrotechnologisch Onderzoek (ATO-DLO, Netherlands) to assess mealiness in apples. In all three cases, mealiness has been described as a multidimensional sensory descriptor capable of gathering the loss of consistency (of crispness and of hardness) and of juiciness. Also within the EC Project several instrumental procedures have been tested for mealiness assessment. In this sense the Physical Properties Laboratory (ETS1A-UPM) has focused its aims in a first stage on performing instrumental tests for assessing some textural descriptors as crispiness, hardness and juiciness. The results obtained within these tests have shown to correlate well with the sensory measurements (Barreiro et Ruiz-Altisent, 1997) in apples, but also have succeed when trying to generate several texture degradation levels on peaches from which mealiness appears to be the last stage (Ortiz et al. 1997).

Influence of sequential fermentations with Torulaspora delbrueckii and Saccharomyces cerevisiae on wine quality

Torulaspora delbrueckii is a non-Saccharomyces yeast with interesting metabolic and physiological properties of potential use in oenology. This work examines the fermentative behaviour of five strains of T. delbrueckii in sequential fermentations with Saccharomyces cerevisiae, analysing the formation of aromatic compounds, polyalcohols and pigments. The fermentative power of these five strains ranged between 7.6 and 9.0% v/v ethanol; the associated volatile acidity was 0.2e0.7 g/l acetic acid. The production of glycerol was inferior to that of S. cerevisiae alone. The mean 2,3-butanediol concentration reached in single-culture S. cerevisiae fermentations was 73% higher than in the five sequential T. delbrueckii/S. cerevisiae fermentations. However, these fermentations produced larger quantities of diacetyl, ethyl lactate and 2-phenylethyl acetate than single-culture S. cerevisiae fermentation. 3-ethoxy propanol was produced only in the sequential fermentations. The five sequential fermentations produced smaller quantities of vitisin A and B than single-culture S. cerevisiae fermentation. In tests performed prior to the addition of the S. cerevisiae in the sequential fermentations, none of the T. delbrueckii strains showed any extracellular hydroxycinnamate decarboxylase activity. They therefore produced no vinyl phenolic pyranoanthocyanins.