Sight distance for traffic safety analysis using GIS

Sight distance is of major importance for road safety either when designing new roads or analysing the alignment of existing roads. It is essential that available sight distance in roads is long enough for emergency stops or overtaking manoeuvres. Also, it is vital for engineers/researchers that the tools used for that analysis are both powerful and intuitive. Based on ArcGIS, the application to be presented not only performs an exhaustive sight distance calculation, but allows an accurate analysis of 3D alignment, using all new tools, from a Digital Elevation Model and vehicle trajectory. The software has been successfully utilised to analyse several two-lane rural roads in Spain. In addition, the software produces thematic maps representing sight distance in which supplementary information about crashes, traffic flow, speed or design consistency could be included, allowing traffic safety studies.

Dynamical characterization of monolithic MOPAs emitting at 1.5 μ�m

Eye-safety requirements in important applications like LIDAR or Free Space Optical Communications make specifically interesting the generation of high power, short optical pulses at 1.5 um. Moreover, high repetition rates allow reducing the error and/or the measurement time in applications involving pulsed time-of-flight measurements, as range finders, 3D scanners or traffic velocity controls. The Master Oscillator Power Amplifier (MOPA) architecture is an interesting source for these applications since large changes in output power can be obtained at GHz rates with a relatively small modulation of the current in the Master Oscillator (MO). We have recently demonstrated short optical pulses (100 ps) with high peak power (2.7 W) by gain switching the MO of a monolithically integrated 1.5 um MOPA. Although in an integrated MOPA the laser and the amplifier are ideally independent devices, compound cavity effects due to the residual reflectance at the different interfaces are often observed, leading to modal instabilities such as self-pulsations.

Functional characterization of Rhizobium leguminosarum bv. viciae DmeRF, a cation diffusion facilitator system involved in nickel and cobalt resistance

In prokaryotes, nickel is an essential element participating in the structure of enzymes involved in multiple cellular processes. Nickel transport is a challenge for microorganisms since, although essential, high levels of this metal inside the cell are toxic. For this reason, bacteria have developed high-affinity nickel transporters as well as nickel-specific detoxification systems. Ultramafic soils, and soils contaminated with heavy metals are excellent sources of nickel resistant bacteria. Molecular analysis of strains isolated in the habitats has revealed novel genetic systems involved in adaptation to such hostile conditions.

Design, development and construction of an outdoor testing facility for semi-transparent photovoltaic modules

Building-integrated Photovoltaics (BIPV) is one of the most promising technologies enabling buildings to generate on-site part of their electricity needs while performing architectural functionalities. A clear example of BIPV products consists of semi-transparent photovoltaic modules (STPV), designed to replace the conventional glazing solutions in building façades. Accordingly, the active building envelope is required to perform multiple requirements such as provide solar shading to avoid overheating, supply solar gains and thermal insulation to reduce heat loads and improve daylight utilization. To date, various studies into STPV systems have focused on their energy performance based on existing simulation programs, or on the modelling, normally validated by limited experimental data, of the STPV modules thermal behaviour. Taking into account that very limited experimental research has been conducted on the energy performance of STPV elements and that the characterization in real operation conditions is necessary to promote an energetically efficient integration of this technology in the building envelope, an outdoor testing facility has been designed, developed and built at the Solar Energy Institute of the Technical University of Madrid. In this work, the methodology used in the definition of the testing facility, its capability and limitations are presented and discussed.

A Dynamically Adaptable Bus Architecture for Trading-Off Among Performance, Consumption and Dependability in Cyber-Physical Systems

Cyber-Physical Systems need to handle increasingly complex tasks, which additionally, may have variable operating conditions over time. Therefore, dynamic resource management to adapt the system to different needs is required. In this paper, a new bus-based architecture, called ARTICo3, which by means of Dynamic Partial Reconfiguration, allows the replication of hardware tasks to support module redundancy, multi-thread operation or dual-rail solutions for enhanced side-channel attack protection is presented. A configuration-aware data transaction unit permits data dispatching to more than one module in parallel, or provide coalesced data dispatching among different units to maximize the advantages of burst transactions. The selection of a given configuration is application independent but context-aware, which may be achieved by the combination of a multi-thread model similar to the CUDA kernel model specification, combined with a dynamic thread/task/kernel scheduler. A multi-kernel application for face recognition is used as an application example to show one scenario of the ARTICo3 architecture.

Metagenomic Anlaysis of microsymbiont selection by the legume plant host

Rhizobium leguminosarum bv.viciae is able to establish nitrogen-fixing symbioses with legumes of the genera Pisum, Lens, Lathyrus and Vicia. Classic studies using trap plants (Laguerre et al., Young et al.) provided evidence that different plant hosts are able to select different rhizobial genotypes among those available in a given soil. However, these studies were necessarily limited by the paucity of relevant biodiversity markers. We have now reappraised this problem with the help of genomic tools. A well-characterized agricultural soil (INRA Bretennieres) was used as source of rhizobia. Plants of Pisum sativum, Lens culinaris, Vicia sativa and V. faba were used as traps. Isolates from 100 nodules were pooled, and DNA from each pool was sequenced (BGI-Hong Kong; Illumina Hiseq 2000, 500 bp PE libraries, 100 bp reads, 12 Mreads). Reads were quality filtered (FastQC, Trimmomatic), mapped against reference R. leguminosarum genomes (Bowtie2, Samtools), and visualized (IGV). An important fraction of the filtered reads were not recruited by reference genomes, suggesting that plant isolates contain genes that are not present in the reference genomes. For this study, we focused on three conserved genomic regions: 16S-23S rDNA, atpD and nodDABC, and a Single Nucleotide Polymorphism (SNP) analysis was carried out with meta / multigenomes from each plant. Although the level of polymorphism varied (lowest in the rRNA region), polymorphic sites could be identified that define the specific soil population vs. reference genomes. More importantly, a plant-specific SNP distribution was observed. This could be confirmed with many other regions extracted from the reference genomes (data not shown). Our results confirm at the genomic level previous observations regarding plant selection of specific genotypes. We expect that further, ongoing comparative studies on differential meta / multigenomic sequences will identify specific gene components of the plant-selected genotypes