Effect of fibers and whole grain content on quality attributes

Incorporation of fiber in cereals may lead to quality issues, thus decreasing consumer acceptance. This is partially due to deterioration of the microstructure, one of the primary quality attributes of cereals. The objective of this study was to better understand the mechanisms by which dietary fibers affect the quality of cereal products during extrusioncooking. The study quantified the effect of amount and type of fiber and whole grain on (i) texture, (ii) structure, and (iii) rehydration properties of extruded cereals. New innovative methods were applied and combined with traditional techniques to characterize both the structure and the rehydration properties. Extruded cereals were produced using a starch-based recipe (whole and wheat flours) and two sources of fibers (oat bran concentrate and wheat bran). The oat and wheat bran levels used in this study were 0, 10, and 20%. The different mixtures were extruded in a pilot twinscrew extruder BC21 (Clextral) and then sugar coated after drying. Mechanical properties of extruded cereals were investigated by compression test. The cellular structure was observed by X-ray tomography. The quality of coating (thickness, homogeneity) was analyzed by optical coherence tomography. The rehydration properties of such cereals in milk were evaluated by magnetic resonance imaging and optical coherence tomography. This work revealed that structure assessment of extruded cereals may lead to a better understanding of the effect of fiber addition on texture and rehydration properties. The application of innovative methods, such as optical coherence tomography and magnetic resonance imaging, was found to be useful to quantify the structural properties.

Effect of sugar beet pulp fibre fractions on growth performance, fecal digestibility and digestive physiology in rabbits around weaning

The present study investigated the effect of the different fibre components of sugar beet pulp (SBP) on growth performance and some digestive traits. Four semi-synthetic diets were formulated with similar NDF (33% DM) and protein (16% DM) level. Control diet was formulated to contain the lowest level of soluble fibre (3% DM) and SBP diet the highest (9%). The soluble (pectins) and insoluble fractions of SBP were studied in other two diets (Pectin and InsSBP diets). A total of 136 weanling rabbits (25 d of age) was housed individually, randomly assigned to 4 experimental groups, and fed ad libitum with the experimental diets during 10 days after weaning. The type of diet did not affect growth rate and stomach pH. Animals fed with SBP diet showed higher DM and NDF digestibility (4 and 83%, respectively), gain:feed ratio (13%), cecal and total tract weight (13 and 9%) and ileal viscosity (148%) than rabbits fed the Control diet, but lower cecal pH (9%). Pectin diet increased ileal viscosity and decreased the weight of stomach content with respect to SBP diet. Rabbits fed InsSBP diet showed similar results to SBP diet but lower ileal viscosity and cecal pH than those fed Pectin diet. In conclusion, SBP and their soluble and insoluble fractions are well digested in young rabbits. However the soluble and insoluble fibre of SBP produce different effects in the gastrointestinal tract.

Effects of the inclusion of oat hulls or sugar beet pulp in the diet on gizzard characteristics, apparent ileal digestibility of nutrients, and microbial count in the ceca in 36 day old broilers reared on floor

The effects of the inclusion of oat hulls (OH) and sugar beet pulp (SBP) in the diet on gizzard characteristics, apparent ileal nutrient digestibility (AID), and Clostridium perfringens, Enterobacteriaceae, and Lactobacillus proliferation in the ceca were studied in 36 d?old broilers. There were a control diet with a low CF content (1.61%) and 2 additional diets that resulted from the dilution of this feed with 5% of either OH or SBP.

Convective transport and stability in films of binary mixtures

Thin polymer films are increasingly used in advanced technological applications. The use of these films as coatings is often limited by their lack of stability due to their wettability properties on the substrates

Comparative exergy analysis of direct alcohol fuel cells using fuel mixtures

Within the last years there has been increasing interest in direct liquid fuel cells as power sources for portable devices and, in the future, power plants for electric vehicles and other transport media as ships will join those applications. Methanol is considerably more convenient and easy to use than gaseous hydrogen and a considerable work is devoted to the development of direct methanol fuel cells. But ethanol has much lower toxicity and from an ecological viewpoint ethanol is exceptional among all other types of fuel as is the only chemical fuel in renewable supply. The aim of this study is to investigate the possibility of using direct alcohol fuel cells fed with alcohol mixtures. For this purpose, a comparative exergy analysis of a direct alcohol fuel cell fed with alcohol mixtures against the same fuel cell fed with single alcohols is performed. The exergetic efficiency and the exergy loss and destruction are calculated and compared in each case. When alcohol mixtures are fed to the fuel cell, the contribution of each fuel to the fuel cell performance is weighted attending to their relative proportion in the aqueous solution. The optimum alcohol composition for methanol/ethanol mixtures has been determined.

Modelling sugar beet water use in Spain

Crop production has a great contribution to water use and abstraction. Sugar beet is an important crop in irrigated land in Spain and covers 70.000 Ha. Crop and resources management are key factors for a sustainable agriculture. The aim of this work is to mode the sugar beet crop growth and water consumption in order to quantify crop water use and virtual water content in different growing conditions.

Decomposition driven interface evolution for layers of binary mixtures: I. Model dirivation and base states

A dynamical model is proposed to describe the coupled decomposition and profile evolution of a free surfacefilm of a binary mixture. An example is a thin film of a polymer blend on a solid substrate undergoing simultaneous phase separation and dewetting. The model is based on model-H describing the coupled transport of the mass of one component (convective Cahn-Hilliard equation) and momentum (Navier-Stokes-Korteweg equations) supplemented by appropriate boundary conditions at the solid substrate and the free surface. General transport equations are derived using phenomenological nonequilibrium thermodynamics for a general nonisothermal setting taking into account Soret and Dufour effects and interfacial viscosity for the internal diffuse interface between the two components. Focusing on an isothermal setting the resulting model is compared to literature results and its base states corresponding to homogeneous or vertically stratified flat layers are analyzed.

Decomposition driven interface evolution for layers of binary mixtures: I. Model dirivation and base states

Algebraic topology (homology) is used to analyze the state of spiral defect chaos in both laboratory experiments and numerical simulations of Rayleigh-Bénard convection. The analysis reveals topological asymmetries that arise when non-Boussinesq effects are present. The asymmetries are found in different flow fields in the simulations and are robust to substantial alterations to flow visualization conditions in the experiment. However, the asymmetries are not observable using conventional statistical measures. These results suggest homology may provide a new and general approach for connecting spatiotemporal observations of chaotic or turbulent patterns to theoretical models.

Sensing colour stability and mixtures of powder paprika using optical reflectance and image analysis.

The production and industry of paprika present several problems related to quality and to production costs. One of the main difficulties is to obtain an objective and quick method for predicting quality. Quality in powder paprika involves: quantity of carotenoids and the appearance and stability of colour. The method used currently for determining quality is the measurement of absorbance at 460 nm wavelength, of an acetone extract of carotenoids, but there is no information about the appearance of the paprika or the stability of its colour with time. " Another important problem is the presence of mixtures of powdered paprika produced in the Spanish region of "La Vera", which has a peculiar way of production, with a high '' quality and price, with other products of lower quality. It is necessary to obtain methods which are able to detect the fraud.

Critical radius for hot-jet ignition of hydrogen-air mixtures

This study addresses deflagration initiation of lean and stoichiometric hydrogen–air mixtures by the sudden discharge of a hot jet of their adiabatic combustion products. The objective is to compute the minimum jet radius required for ignition, a relevant quantity of interest for safety and technological applications. For sufficiently small discharge velocities, the numerical solution of the problem requires integration of the axisymmetric Navier–Stokes equations for chemically reacting ideal-gas mixtures, supplemented by standard descriptions of the molecular transport terms and a suitably reduced chemical-kinetic mechanism for the chemistry description. The computations provide the variation of the critical radius for hot-jet ignition with both the jet velocity and the equivalence ratio of the mixture, giving values that vary between a few tens microns to a few hundred microns in the range of conditions explored. For a given equivalence ratio, the critical radius is found to increase with increasing injection velocities, although the increase is only moderately large. On the other hand, for a given injection velocity, the smallest critical radius is found at stoichiometric conditions.

Asphalt rubber mixtures with warm mix asphalt additives

En los últimos años, debido a la creciente preocupación por el calentamiento global y el cambio climático, uno de los retos más importantes a los que se enfrenta nuestra sociedad es el uso eficiente y económico de energía así como la necesidad correspondiente de reducir los gases de efecto invernadero (GEI). Las tecnologías de mezclas semicalientes se han convertido en un nuevo e importante tema de investigación en el campo de los materiales para pavimentos ya que ofrece una solución potencial para la reducción del consumo energético y las emisiones de GEI durante la producción y puesta en obra de las mezclas bituminosas. Por otro lado, los pavimentos que contienen polvo de caucho procedente de neumático fuera de uso, al hacer uso productos de desecho, ahorran energía y recursos naturales. Estos pavimentos ofrecen una resistencia mejorada a la formación de roderas, a la fatiga y a la fisuración térmica, reducen los costes de mantenimiento y el ruido del tráfico así como prolongan la vida útil del pavimento. Sin embargo, estas mezclas presentan un importante inconveniente: la temperatura de fabricación se debe aumentar en comparación con las mezclas asfálticas convencionales, ya que la incorporación de caucho aumenta la viscosidad del ligante y, por lo tanto, se producen mayores cantidades de emisiones de GEI. En la presente Tesis, la tecnología de mezclas semicalientes con aditivos orgánicos (Sasobit, Asphaltan A, Asphaltan B, Licomont) se incorporó a la de betunes de alta viscosidad modificados con caucho (15% y 20% de caucho) con la finalidad de dar una solución a los inconvenientes de mezclas con caucho gracias a la utilización de aditivos reductores de la viscosidad. Para este fin, se estudió si sería posible obtener una producción más sostenible de mezclas con betunes de alto contenido en caucho sin afectar significativamente su nivel de rendimiento mecánico. La metodología aplicada para evaluar y comparar las características de las mezclas consistió en la realización de una serie de ensayos de laboratorio para betunes y mezclas con caucho y con aditivos de mezclas semicalientes y de un análisis del ciclo de vida híbrido de la producción de mezclas semicalientes teniendo en cuenta la papel del aditivo en la cadena de suministro con el fin de cuantificar con precisión los beneficios de esta tecnología. Los resultados del estudio indicaron que la incorporación de los aditivos permite reducir la viscosidad de los ligantes y, en consecuencia, las temperaturas de producción y de compactación de las mezclas. Por otro lado, aunque la adición de caucho mejoró significativamente el comportamiento mecánico de los ligantes a baja temperatura reduciendo la susceptibilidad al fenómeno de fisuración térmica, la adición de las ceras aumentó ligeramente la rigidez. Los resultados del estudio reológico mostraron que la adición de porcentajes crecientes de caucho mejoraban la resistencia del pavimento con respecto a la resistencia a la deformación permanente a altas temperaturas y a la fisuración térmica a bajas temperaturas. Además, se observó que los aditivos mejoran la resistencia a roderas y la elasticidad del pavimento al aumentar el módulo complejo a altas temperaturas y al disminuir del ángulo de fase. Por otra parte, el estudio reológico confirmó que los aditivos estudiados aumentan ligeramente la rigidez a bajas temperaturas. Los ensayos de fluencia llevados a cabo con el reómetro demostraron una vez más la mejora en la elasticidad y en la resistencia a la deformación permanente dada por la adición de las ceras. El estudio de mezclas con caucho y aditivos de mezclas semicalientes llevado a cabo demostró que las temperaturas de producción/compactación se pueden disminuir, que las mezclas no experimentarían escurrimiento, que los aditivos no cambian significativamente la resistencia conservada y que cumplen la sensibilidad al agua exigida. Además, los aditivos aumentaron el módulo de rigidez en algunos casos y mejoraron significativamente la resistencia a la deformación permanente. Asimismo, a excepción de uno de los aditivos, las mezclas con ceras tenían la misma o mayor resistencia a la fatiga en comparación con la mezcla control. Los resultados del análisis de ciclo de vida híbrido mostraron que la tecnología de mezclas semicalientes es capaz de ahorrar significativamente energía y reducir las emisiones de GEI, hasta un 18% y 20% respectivamente, en comparación con las mezclas de control. Sin embargo, en algunos de los casos estudiados, debido a la presencia de la cera, la temperatura de fabricación debe reducirse en un promedio de 8 ºC antes de que los beneficios de la reducción de emisiones y el consumo de combustible puedan ser obtenidos. Los principales sectores contribuyentes a los impactos ambientales generados en la fabricación de mezclas semicalientes fueron el sector de los combustibles, el de la minería y el de la construcción. Due to growing concerns over global warming and climate change in recent years, one of the most important challenges facing our society is the efficient and economic use of energy, and with it, the corresponding need to reduce greenhouse gas (GHG) emissions. The Warm Mix Asphalt (WMA) technology has become an important new research topic in the field of pavement materials as it offers a potential solution for the reduction of energy consumption and GHG emissions during the production and placement of asphalt mixtures. On the other hand, pavements containing crumb-rubber modified (CRM) binders save energy and natural resources by making use of waste products. These pavements offer an improved resistance to rutting, fatigue and thermal cracking; reduce traffic noise and maintenance costs and prolong pavement life. These mixtures, however, present one major drawback: the manufacturing temperature is higher compared to conventional asphalt mixtures as the rubber lends greater viscosity to the binder and, therefore, larger amounts of GHG emissions are produced. In this dissertation the WMA technology with organic additives (Sasobit, Asphaltan A, Asphaltan B and Licomont) was applied to CRM binders (15% and 20% of rubber) in order to offer a solution to the drawbacks of asphalt rubber (AR) mixtures thanks to the use of fluidifying additives. For this purpose, this study sought to determine if a more sustainable production of AR mixtures could be obtained without significantly affecting their level of mechanical performance. The methodology applied in order to evaluate and compare the performance of the mixtures consisted of carrying out several laboratory tests for the CRM binders and AR mixtures with WMA additives (AR-WMA mixtures) and a hybrid input-output-based life cycle assessment (hLCA) of the production of WMA. The results of the study indicated that the incorporation of the organic additives were able to reduce the viscosity of the binders and, consequently, the production and compaction temperatures. On the other hand, although the addition of rubber significantly improved the mechanical behaviour of the binders at low temperatures reducing the susceptibility to thermal cracking phenomena, the addition of the waxes slightly increased the stiffness. Master curves showed that the addition of increasing percentages of rubber improved the resistance of the pavement regarding both resistance to permanent deformation at high temperatures and thermal cracking at low temperatures. In addition, the waxes improved the rutting resistance and the elasticity as they increased the complex modulus at high temperatures and decreased the phase angle. Moreover, master curves also attest that the WMA additives studied increase the stiffness at low temperatures. The creep tests carried out proved once again the improvement in the elasticity and in the resistance to permanent deformation given by the addition of the waxes. The AR-WMA mixtures studied have shown that the production/compaction temperatures can be decreased, that the mixtures would not experience binder drainage, that the additives did not significantly change the retained resistance and fulfilled the water sensitivity required. Furthermore, the additives increased the stiffness modulus in some cases and significantly improved the permanent deformation resistance. Except for one of the additives, the waxes had the same or higher fatigue resistance compared to the control mixture. The results of the hLCA demonstrated that the WMA technology is able to significantly save energy and reduce GHG emissions, up to 18% and 20%, respectively, compared to the control mixtures. However, in some of the case studies, due to the presence of wax, the manufacturing temperature at the asphalt plant must be reduced by an average of 8ºC before the benefits of reduced emissions and fuel usage can be obtained. The results regarding the overall impacts generated using a detailed production layer decomposition indicated that fuel, mining and construction sectors are the main contributors to the environmental impacts of manufacturing WMA mixtures.

Conditional density approximations with mixtures of polynomials

Mixtures of polynomials (MoPs) are a non-parametric density estimation technique especially designed for hybrid Bayesian networks with continuous and discrete variables. Algorithms to learn one- and multi-dimensional (marginal) MoPs from data have recently been proposed. In this paper we introduce two methods for learning MoP approximations of conditional densities from data. Both approaches are based on learning MoP approximations of the joint density and the marginal density of the conditioning variables, but they differ as to how the MoP approximation of the quotient of the two densities is found. We illustrate and study the methods using data sampled from known parametric distributions, and we demonstrate their applicability by learning models based on real neuroscience data. Finally, we compare the performance of the proposed methods with an approach for learning mixtures of truncated basis functions (MoTBFs). The empirical results show that the proposed methods generally yield models that are comparable to or significantly better than those found using the MoTBF-based method.

Evaluación de tecnologías de manejo de arvenses en el cultivo de la caña de azúcar (Saccharum spp. híbrido)

En Cuba, las arvenses que afectan al cultivo de la caña de azúcar son una de las causas fundamentales de los bajos rendimientos agrícolas y su control constituye unas de las principales partidas de gastos. En general, se aplican los herbicidas, así como otros métodos de control, sin tener en cuenta el tipo de suelo y las características de estas plantas. Sobre el manejo de arvenses no existen trabajos de investigación que aborden aspectos de eficiencia energética de las producciones y daños al ambiente. Por lo antes señalado, el objetivo de esta investigación fue evaluar diversas tecnologías de manejo de arvenses en el cultivo de la caña de azúcar (Saccharum spp. híbrido), en cepas de primavera y retoño, en tres tipos de suelos, con el propósito de obtener producciones sustentables. El área de estudio se localizó en los campos de la Empresa Azucarera del municipio “Majibacoa”, provincia de Las Tunas (oriente de Cuba), que posee condiciones edafoclimáticas que abundan a lo largo del país. Los tres tipos de suelos más representativos son Fersialítico Pardo Rojizo ócrico, Pardo Mullido y Vertisol Crómico gléyco. En dicha área se han identificado 31 especies de arvenses, 16 de la clase Liliopsida y 15 de la Magnoliopsida. En un primer grupo de experimentos, se desarrollaron nueve ensayos de campo para evaluar la efectividad de herbicidas y mezclas de estos en el manejo de arvenses en el cultivo de la caña de azúcar, tanto en cepas de primavera como de retoño, en los tres tipos de suelos. Se establecieron parcelas de 80 m2 distribuidas en bloques al azar con cuatro réplicas. La efectividad se evaluó por medio del porcentaje de cobertura por arvenses y la fitotoxicidad provocada a las plantas de caña, teniendo en cuenta el coste asociado a cada tratamiento. En aplicaciones preemergentes en caña planta de primavera, el herbicida más eficiente fue el Isoxaflutole con dosis de 0,15; 0,20 y 0,25 kg.ha-1 de producto comercial (pc) en los suelos Fersialítico, Pardo y Vertisol respectivamente. En aplicaciones postemergentes tempranas la mezcla más eficiente fue la de Isoxaflutole + Ametrina +2,4-D con las dosis de Isoxaflutole citadas anteriormente. En aplicaciones preemergentes en cepa de retoño, el herbicida más eficiente fue el Isoxaflutole a dosis de 0,20 kg.ha-1 pc para el suelo Fersialítico y a 0,25 kg.ha-1 pc para los suelos Pardo y Vertisol. En un segundo grupo, se realizaron seis ensayos de campo distribuidos en dos fases. En la primera fase, se desarrollaron tres experimentos, uno por cada tipo de suelo, para evaluar la eficiencia de nueve tecnologías de manejo de arvenses (químicas y físicas combinadas) en cepa de primavera de caña de azúcar. En la siguiente fase, los tres ensayos restantes (uno por tipo de suelo) evaluaron tecnologías de manejo de arvenses durante dos ciclos de producción de caña de azúcar (etapa de primavera y retoño). En la etapa de primavera se aplicó la tecnología más eficiente de los tres experimentos anteriores y durante la etapa de retoño se evaluaron otras nueve tecnologías propias de este tipo de cepa. En estos experimentos los diferentes tratamientos se aplicaron en franjas distribuidas al azar con cuatro réplicas. En las tecnologías evaluadas se emplearon los herbicidas y mezclas que resultaron más eficientes en el primer grupo de experimentos. En cada caso, se evaluaron la eficiencia energética de la producción de azúcar y otros derivados, la resistencia a la penetración de los suelos, la carga contaminante hacia la atmósfera producto de la combustión del diésel y los beneficios al aplicar las diferentes tecnologías. En la primera fase (cepa de primavera), la tecnología con mejor resultado fue la aplicación preemergente de Isoxaflutole inmediatamente después de la plantación, seguida de descepe químico con Glufosinato de amonio, más labor con grada múltiple aproximadamente a los 80 días de la plantación y aplicación pre-cierre con Glufosinato de amonio. En la segunda fase (dos ciclos del cultivo), el mejor resultado se obtuvo cuando en la etapa de retoño se realizó una aplicación preemergente de Isoxaflutole, descepe químico con Glufosinato de amonio y aplicación pre-cierre con este mismo herbicida. En los tres tipos de suelos durante los dos ciclos, la eficiencia energética tuvo valores de 7,2 - 7,5, la resistencia a la penetración 1,2 - 1,5 MPa, la carga contaminante hacia la atmósfera fue de 63,3 - 64,9 kg.t-1 de caña cosechada y beneficios de 8.324 - 8.455 pesos cubanos por hectárea. Este estudio demuestra que un control eficiente de las arvenses debe tener en cuenta necesariamente el tipo de suelo. Así, en los Vertisoles, con mayor contenido en arcilla, se requieren mayores dosis de Isoxaflutole y la eficiencia energética de la producción es menor. La persistencia de ciertas arvenses, especialmente de la clase Liliopsida, requiere de un manejo integrado que incluya diferentes tipos de herbicidas. ABSTRACT In Cuba, weeds affecting the sugarcane are one of the main causes of low agricultural yields, and their control constitutes some of the main items of expenditure. In general, herbicides are applied, as well as other control methods, without keeping in mind the soil type and the characteristics of these plants. Moreover, weed control research approaching aspects about energy efficiency of the crop production, and environmental damages are missing. Hence, the objective of this investigation was to evaluate diverse technologies of weed handling in sugarcane (Saccharum spp. hybrid), both in spring cane plant and ratoon, in three types of soils, with the purpose of obtaining sustainable productions. The study area was located in the fields of the Sugar Enterprise of the Municipality "Majibacoa”, Las Tunas province (east of Cuba) that possesses ecological conditions that are plentiful along the country. The three more representative types of soils are Fersialitic, Brown, and Vertisol. In this area 31 weeds species have been identified, 16 of the Class Liliopsida and 15 of the Magnoliopsida. In a first group of experiments, nine field rehearsals were developed to evaluate the effectiveness of herbicides and mixtures of these for weed handling in sugarcane, in spring cane plants as well as in ratoon, in the three types of soils. Plots of 80 m-2 were distributed at random blocks with four replications. The effectiveness was evaluated by means of the covering percentage by weeds and the provoked toxicity to the cane plants, keeping in mind the cost associated to each treatment. In preemergence applications in spring cane plant, the most efficient herbicide was the Isoxaflutole with dose of 0.15; 0.20 and 0.25 kg.ha-1 of commercial product (pc) in the soils Fersialítico, Brown and Vertisol respectively. In early postemergence applications the most efficient mixture was that of Isoxaflutole + Ametrina + 2,4-D with the doses of Isoxaflutole mentioned previously. In preemergence applications in ratoon, the most efficient herbicide was the Isoxaflutole at dose of 0.20 kg.ha-1 pc for the soil Fersialític and to 0.25 kg. ha-1 pc for the Brown soil and Vertisol. In a second group, six field rehearsals distributed in two phases were carried out. In the first phase, three experiments were developed, one for each soil type, to evaluate the efficiency of nine technologies of weed handling in spring cane plant. In the following phase, the three remaining rehearsals (one for each soil type) diverse technologies of weed handling were evaluated during two cycles of sugarcane production (spring stage and ratoon). In the spring stage the most efficient technology in the three previous experiments was applied and during ratoon stage other nine technologies were evaluated. In these experiments the different treatments were applied in fringes distributed at random with four replicas. In the evaluated technologies the herbicides and mixtures were used selecting those that were more efficient in the first group of experiments. In each case, the energy efficiency of the sugar production and other derivatives, the soil penetration resistance, the polluting load toward the atmosphere product of the combustion, and the benefits when applying the different technologies were all evaluated. In the first phase (spring cane plant), the technology with better result was the preemergence application of Isoxaflutole immediately after the plantation, followed by chemical eradication with Ammonia Glufosinate, hoeing work with multiple tier approximately to the 80 days of the plantation and pre-closing application with Ammonia Glufosinate. In the second phase (two cycles of the cultivation), the best result was obtained when a preemergence application of Isoxaflutole was carried out in sprout's stage, chemical eradication with Ammonia Glufosinate and pre-closing application with this same herbicide. In the three types of soils during the two cycles, the energy efficiency achieved values of 7.2 to 7.5, the resistance to the penetration 1.2 - 1.5 MPa, the polluting load toward the atmosphere was of 63.3 - 64.9 kg.t-1 of the harvested cane and the obtained benefits of 8,324 - 8,455 Cuban pesos per hectare. This study demonstrates that an efficient control of the weeds should necessarily keep in mind the soil type. This way, in the Vertisols, with more clay content, bigger dose of Isoxaflutole is required and the energy efficiency of the production is smaller. The persistence of certain weeds, especially of the class Liliopsida, requires of an integrated handling him to include different types of herbicides.

Approaches Regarding the Competition in Romanian Sugar Market

This paper proposes an economic instrument designed to assess the competitive nature of the sugar industry in Romania. In the first part of the paper is presented the theoretical background underlying index (HHI) and its calculation methodology. Then comes the results of a first application of this index for a total of 10 plants in the sugar industry, the robustness of these results is discussed. We believe HHI is a proactive tool that may prove useful competition authority, in its pursuit of continuous monitoring of various industries in the economy and in the internal decision-making on resource allocation institution (Peacock, and Prisecaru, 2013).The starting point of our research is to free competition in the European market with competitors much stronger than Romanian plants, plants that produce at a price lower than the domestic ones. In our study we will see if it is a concentration of production in factories around the strongest in Romania, concentration accompanied by the collapse of those who could not resist the market.The market concentration, competition policy, we will follow using the HHI index, for evaluation of impact analysis on existing trade, the number and size of competitors, protecting existing sales structures, avoiding disruptions in the competitive environment, etc.