Direct and indirect economic impacts of drought in the agri-food sector in the Ebro River basin (Spain).

The economic evaluation of drought impacts is essential in order to define efficient and sustainable management and mitigation strategies. The aim of this study is to evaluate the economic impacts of a drought event on the agricultural sector and measure how they are transmitted from primary production to industrial output and related employment. We fit econometric models to determine the magnitude of the economic loss attributable to water storage. The direct impacts of drought on agricultural productivity are measured through a direct attribution model. Indirect impacts on agricultural employment and the agri-food industry are evaluated through a nested indirect attribution model. The transmission of water scarcity effects from agricultural production to macroeconomic variables is measured through chained elasticities. The models allow for differentiating the impacts deriving from water scarcity from other sources of economic losses. Results show that the importance of drought impacts are less relevant at the macroeconomic level, but are more significant for those activities directly dependent on water abstractions and precipitation. From a management perspective, implications of these findings are important to develop effective mitigation strategies to reduce drought risk exposure.

Desarrollo de un Modelo de Gestión de Riesgos Operacionales basado en las Directrices del Comité de Basilea

La presente investigación tiene como objetivo principal diseñar un Modelo de Gestión de Riesgos Operacionales (MGRO) según las Directrices de los Acuerdos II y III del Comité de Supervisión Bancaria de Basilea del Banco de Pagos Internacionales (CSBB-BPI). Se considera importante realizar un estudio sobre este tema dado que son los riesgos operacionales (OpR) los responsables en gran medida de las últimas crisis financieras mundiales y por la dificultad para detectarlos en las organizaciones. Se ha planteado un modelo de gestión subdividido en dos vías de influencias. La primera acoge el paradigma holístico en el que se considera que hay múltiples maneras de percibir un proceso cíclico, así como las herramientas para observar, conocer y entender el objeto o sujeto percibido. La segunda vía la representa el paradigma totalizante, en el que se obtienen datos tanto cualitativos como cuantitativos, los cuales son complementarios entre si. Por otra parte, este trabajo plantea el diseño de un programa informático de OpR Cualitativo, que ha sido diseñado para determinar la raíz de los riesgos en las organizaciones y su Valor en Riesgo Operacional (OpVaR) basado en el método del indicador básico. Aplicando el ciclo holístico al caso de estudio, se obtuvo el siguiente diseño de investigación: no experimental, univariable, transversal descriptiva, contemporánea, retrospectiva, de fuente mixta, cualitativa (fenomenológica y etnográfica) y cuantitativa (descriptiva y analítica). La toma de decisiones y recolección de información se realizó en dos fases en la unidad de estudio. En la primera se tomó en cuenta la totalidad de la empresa Corpoelec-EDELCA, en la que se presentó un universo estadístico de 4271 personas, una población de 2390 personas y una unidad de muestreo de 87 personas. Se repitió el proceso en una segunda fase, para la Central Hidroeléctrica Simón Bolívar, y se determinó un segundo universo estadístico de 300 trabajadores, una población de 191 personas y una muestra de 58 profesionales. Como fuentes de recolección de información se utilizaron fuentes primarias y secundarias. Para recabar la información primaria se realizaron observaciones directas, dos encuestas para detectar las áreas y procesos con mayor nivel de riesgos y se diseñó un cuestionario combinado con otra encuesta (ad hoc) para establecer las estimaciones de frecuencia y severidad de pérdidas operacionales. La información de fuentes secundarias se extrajo de las bases de datos de Corpoelec-EDELCA, de la IEA, del Banco Mundial, del CSBB-BPI, de la UPM y de la UC at Berkeley, entre otras. Se establecieron las distribuciones de frecuencia y de severidad de pérdidas operacionales como las variables independientes y el OpVaR como la variable dependiente. No se realizó ningún tipo de seguimiento o control a las variables bajo análisis, ya que se consideraron estas para un instante especifico y solo se determinan con la finalidad de establecer la existencia y valoración puntual de los OpR en la unidad de estudio. El análisis cualitativo planteado en el MGRO, permitió detectar que en la unidad de investigación, el 67% de los OpR detectados provienen de dos fuentes principales: procesos (32%) y eventos externos (35%). Adicionalmente, la validación del MGRO en Corpoelec-EDELCA, permitió detectar que el 63% de los OpR en la organización provienen de tres categorías principales, siendo los fraudes externos los presentes con mayor regularidad y severidad de pérdidas en la organización. La exposición al riesgo se determinó fundamentándose en la adaptación del concepto de OpVaR que generalmente se utiliza para series temporales y que en el caso de estudio presenta la primicia de aplicarlo a datos cualitativos transformados con la escala Likert. La posibilidad de utilizar distribuciones de probabilidad típicas para datos cuantitativos en distribuciones de frecuencia y severidad de pérdidas con datos de origen cualitativo fueron analizadas. Para el 64% de los OpR estudiados se obtuvo que la frecuencia tiene un comportamiento semejante al de la distribución de probabilidad de Poisson y en un 55% de los casos para la severidad de pérdidas se obtuvo a las log-normal como las distribuciones de probabilidad más comunes, con lo que se concluyó que los enfoques sugeridos por el BCBS-BIS para series de tiempo son aplicables a los datos cualitativos. Obtenidas las distribuciones de frecuencia y severidad de pérdidas, se convolucionaron estas implementando el método de Montecarlo, con lo que se obtuvieron los enfoques de distribuciones de pérdidas (LDA) para cada uno de los OpR. El OpVaR se dedujo como lo sugiere el CSBB-BPI del percentil 99,9 o 99% de cada una de las LDA, obteniéndose que los OpR presentan un comportamiento similar al sistema financiero, resultando como los de mayor peligrosidad los que se ubican con baja frecuencia y alto impacto, por su dificultad para ser detectados y monitoreados. Finalmente, se considera que el MGRO permitirá a los agentes del mercado y sus grupos de interés conocer con efectividad, fiabilidad y eficiencia el status de sus entidades, lo que reducirá la incertidumbre de sus inversiones y les permitirá establecer una nueva cultura de gestión en sus organizaciones. ABSTRACT This research has as main objective the design of a Model for Operational Risk Management (MORM) according to the guidelines of Accords II and III of the Basel Committee on Banking Supervision of the Bank for International Settlements (BCBS- BIS). It is considered important to conduct a study on this issue since operational risks (OpR) are largely responsible for the recent world financial crisis and due to the difficulty in detecting them in organizations. A management model has been designed which is divided into two way of influences. The first supports the holistic paradigm in which it is considered that there are multiple ways of perceiving a cyclical process and contains the tools to observe, know and understand the subject or object perceived. The second way is the totalizing paradigm, in which both qualitative and quantitative data are obtained, which are complementary to each other. Moreover, this paper presents the design of qualitative OpR software which is designed to determine the root of risks in organizations and their Operational Value at Risk (OpVaR) based on the basic indicator approach. Applying the holistic cycle to the case study, the following research design was obtained: non- experimental, univariate, descriptive cross-sectional, contemporary, retrospective, mixed-source, qualitative (phenomenological and ethnographic) and quantitative (descriptive and analytical). Decision making and data collection was conducted in two phases in the study unit. The first took into account the totality of the Corpoelec-EDELCA company, which presented a statistical universe of 4271 individuals, a population of 2390 individuals and a sampling unit of 87 individuals. The process was repeated in a second phase to the Simon Bolivar Hydroelectric Power Plant, and a second statistical universe of 300 workers, a population of 191 people and a sample of 58 professionals was determined. As sources of information gathering primary and secondary sources were used. To obtain the primary information direct observations were conducted and two surveys to identify the areas and processes with higher risks were designed. A questionnaire was combined with an ad hoc survey to establish estimates of frequency and severity of operational losses was also considered. The secondary information was extracted from the databases of Corpoelec-EDELCA, IEA, the World Bank, the BCBS-BIS, UPM and UC at Berkeley, among others. The operational loss frequency distributions and the operational loss severity distributions were established as the independent variables and OpVaR as the dependent variable. No monitoring or control of the variables under analysis was performed, as these were considered for a specific time and are determined only for the purpose of establishing the existence and timely assessment of the OpR in the study unit. Qualitative analysis raised in the MORM made it possible to detect that in the research unit, 67% of detected OpR come from two main sources: external processes (32%) and external events (35%). Additionally, validation of the MORM in Corpoelec-EDELCA, enabled to estimate that 63% of OpR in the organization come from three main categories, with external fraud being present more regularly and greater severity of losses in the organization. Risk exposure is determined basing on adapting the concept of OpVaR generally used for time series and in the case study it presents the advantage of applying it to qualitative data transformed with the Likert scale. The possibility of using typical probability distributions for quantitative data in loss frequency and loss severity distributions with data of qualitative origin were analyzed. For the 64% of OpR studied it was found that the frequency has a similar behavior to that of the Poisson probability distribution and 55% of the cases for loss severity it was found that the log-normal were the most common probability distributions. It was concluded that the approach suggested by the BCBS-BIS for time series can be applied to qualitative data. Once obtained the distributions of loss frequency and severity have been obtained they were subjected to convolution implementing the Monte Carlo method. Thus the loss distribution approaches (LDA) were obtained for each of the OpR. The OpVaR was derived as suggested by the BCBS-BIS 99.9 percentile or 99% of each of the LDA. It was determined that the OpR exhibits a similar behavior to the financial system, being the most dangerous those with low frequency and high impact for their difficulty in being detected and monitored. Finally, it is considered that the MORM will allows market players and their stakeholders to know with effectiveness, efficiency and reliability the status of their entities, which will reduce the uncertainty of their investments and enable them to establish a new management culture in their organizations.

Diseño de un modelo para la identificación y análisis de tramos de carreteras sin accidentes : una nueva visión de la seguridad vial

El planteamiento tradicional de análisis de la accidentalidad en carretera pasa por la consideración de herramientas paliativas, como son la identificación y gestión de los puntos negros o tramos de concentración de accidentes, o preventivas, como las auditorías e inspecciones de seguridad vial. En esta tesis doctoral se presenta un planteamiento complementario a estas herramientas, desde una perspectiva novedosa: la consideración de los tramos donde no se producen accidentes; son los denominados Tramos Blancos. La tesis persigue demostrar que existen determinados parámetros del diseño de las carreteras y del tráfico que, bajo características generales similares de las vías, tienen influencia en el hecho de que se produzcan o no accidentes, adicionalmente a la exposición al riesgo, como factor principal, y a otros factores. La propia definición de los Tramos Blancos, entendidos como tramos de carreteras de longitud representativa donde no se han producido accidentes con víctimas mortales o heridos graves durante un periodo largo de tiempo, garantiza que esta situación no se produzca como consecuencia de la aleatoriedad de los accidentes, sino que pudiera deberse a una confluencia específica de determinados parámetros de la geometría de la vía y del tráfico total y de vehículos pesados. Para el desarrollo de esta investigación se han considerado la red de autopistas de peaje y las carreteras convencionales de la Red del Estado de España, que supone un total de 17.000 kilómetros, y los datos de accidentes con víctimas mortales y heridos graves en el periodo 2006-2010, ambos incluidos, en estas redes (un total de 10.000 accidentes). La red viaria objeto de análisis supone el 65% de la longitud de la Red de Carreteras del Estado, por la que circula el 33% de su tráfico; en ella se produjeron en el año 2013 el 47% de los accidentes con víctimas y el 60% de las víctimas mortales de la Red de Carreteras del Estado. Durante la investigación se ha desarrollado una base de datos de 250.130 registros y más de 3.5 millones de datos en el caso de las autopistas de peaje de la Red de Carreteras del Estado y de 935.402 registros y más de 14 millones de datos en el caso de la red convencional del Estado analizada. Tanto las autopistas de peaje como las carreteras convencionales han sido clasificadas según sus características de tráfico, de manera que se valoren vías con nivel de exposición al riesgo similar. Para cada tipología de vía, se ha definido como longitud de referencia para que un tramo se considere Tramo Blanco la longitud igual al percentil 95 de las longitudes de tramos sin accidentes con heridos graves o víctimas mortales durante el periodo 2006-2010. En el caso de las autopistas de peaje, en la tipología que ha sido considerada para la definición del modelo, esta longitud de referencia se estableció en 14.5 kilómetros, mientras que en el caso de las carreteras convencionales, se estableció en 7.75 kilómetros. Para cada uno de los tipos de vía considerados se han construido una base de datos en la que se han incluido las variables de existencia o no de Tramo Blanco, así como las variables de tráfico (intensidad media diaria total, intensidad de vehículos pesados y porcentaje de vehículos pesados ), la velocidad media y las variables de geometría (número de carriles, ancho de carril, ancho de arcén derecho e izquierdo, ancho de calzada y plataforma, radio, peralte, pendiente y visibilidad directa e inversa en los casos disponibles); como variables adicionales, se han incluido el número de accidentes con víctimas, los fallecidos y heridos graves, índices de peligrosidad, índices de mortalidad y exposición al riesgo. Los trabajos desarrollados para explicar la presencia de Tramos Blancos en la red de autopistas de peaje han permitido establecer las diferencias entre los valores medios de las variables de tráfico y diseño geométrico en Tramos Blancos respecto a tramos no blancos y comprobar que estas diferencias son significativas. Así mismo, se ha podido calibrar un modelo de regresión logística que explica parcialmente la existencia de Tramos Blancos, para rangos de tráfico inferiores a 10.000 vehículos diarios y para tráficos entre 10.000 y 15.000 vehículos diarios. Para el primer grupo (menos de 10.000 vehículos al día), las variables que han demostrado tener una mayor influencia en la existencia de Tramo Blanco son la velocidad media de circulación, el ancho de carril, el ancho de arcén izquierdo y el porcentaje de vehículos pesados. Para el segundo grupo (entre 10.000 y 15.000 vehículos al día), las variables independientes más influyentes en la existencia de Tramo Blanco han sido la velocidad de circulación, el ancho de calzada y el porcentaje de vehículos pesados. En el caso de las carreteras convencionales, los diferentes análisis realizados no han permitido identificar un modelo que consiga una buena clasificación de los Tramos Blancos. Aun así, se puede afirmar que los valores medios de las variables de intensidad de tráfico, radio, visibilidad, peralte y pendiente presentan diferencias significativas en los Tramos Blancos respecto a los no blancos, que varían en función de la intensidad de tráfico. Los resultados obtenidos deben considerarse como la conclusión de un análisis preliminar, dado que existen otros parámetros, tanto de diseño de la vía como de la circulación, el entorno, el factor humano o el vehículo que podrían tener una influencia en el hecho que se analiza, y no se han considerado por no disponer de esta información. En esta misma línea, el análisis de las circunstancias que rodean al viaje que el usuario de la vía realiza, su tipología y motivación es una fuente de información de interés de la que no se tienen datos y que permitiría mejorar el análisis de accidentalidad en general, y en particular el de esta investigación. Adicionalmente, se reconocen limitaciones en el desarrollo de esta investigación, en las que sería preciso profundizar en el futuro, reconociendo así nuevas líneas de investigación de interés. The traditional approach to road accidents analysis has been based in the use of palliative tools, such as black spot (or road sections) identification and management, or preventive tools, such as road safety audits and inspections. This thesis shows a complementary approach to the existing tools, from a new perspective: the consideration of road sections where no accidents have occurred; these are the so-called White Road Sections. The aim of this thesis is to show that there are certain design parameters and traffic characteristics which, under similar circumstances for roads, have influence in the fact that accidents occur, in addition to the main factor, which is the risk exposure, and others. White Road Sections, defined as road sections of a representative length, where no fatal accidents or accidents involving serious injured have happened during a long period of time, should not be a product of randomness of accidents; on the contrary, they might be the consequence of a confluence of specific parameters of road geometry, traffic volumes and heavy vehicles traffic volumes. For this research, the toll motorway network and single-carriageway network of the Spanish National Road Network have been considered, which is a total of 17.000 kilometers; fatal accidents and those involving serious injured from the period 2006-2010 have been considered (a total number of 10.000 accidents). The road network covered means 65% of the total length of the National Road Network, which allocates 33% of traffic volume; 47% of accidents with victims and 60% of fatalities happened in these road networks during 2013. During the research, a database of 250.130 registers and more than 3.5 million data for toll motorways and 935.042 registers and more than 14 million data for single carriageways of the National Road Network was developed. Both toll motorways and single-carriageways have been classified according to their traffic characteristics, so that the analysis is performed over roads with similar risk exposure. For each road type, a reference length for White Road Section has been defined, as the 95 percentile of all road sections lengths without accidents (with fatalities or serious injured) for 2006-2010. For toll motorways, this reference length concluded to be 14.5 kilometers, while for single-carriageways, it was defined as 7.75 kilometers. A detailed database was developed for each type of road, including the variable “existence of White Road Section”, as well as variables of traffic (average daily traffic volume, heavy vehicles average daily traffic and percentage of heavy vehicles from the total traffic volume), average speed and geometry variables (number of lanes, width of lane, width of shoulders, carriageway width, platform width, radius, superelevation, slope and visibility); additional variables, such as number of accidents with victims, number of fatalities or serious injured, risk and fatality rates and risk exposure, have also been included. Research conducted for the explanation of the presence of White Road Sections in the toll motorway network have shown statistically significant differences in the average values of variables of traffic and geometric design in White Road Sections compared with other road sections. In addition, a binary logistic model for the partial explanation of the presence of White Road Sections was developed, for traffic volumes lower than 10.000 daily vehicles and for those running from 10.000 to 15.000 daily vehicles. For the first group, the most influent variables for the presence of White Road Sections were the average speed, width of lane, width of left shoulder and percentage of heavy vehicles. For the second group, the most influent variables were found to be average speed, carriageway width and percentage of heavy vehicles. For single-carriageways, the different analysis developed did not reach a proper model for the explanation of White Road Sections. However, it can be assumed that the average values of the variables of traffic volume, radius, visibility, superelevation and slope show significant differences in White Road Sections if compared with others, which also vary with traffic volumes. Results obtained should be considered as a conclusion of a preliminary analysis, as there are other parameters, not only design-related, but also regarding traffic, environment, human factor and vehicle which could have an influence in the fact under research, but this information has not been considered in the analysis, as it was not available. In parallel, the analysis of the circumstances around the trip, including its typology and motivation is an interesting source of information, from which data are not available; the availability of this information would be useful for the improvement of accident analysis, in general, and for this research work, in particular. In addition, there are some limitations in the development of the research work; it would be necessary to develop an in-depth analysis in the future, thus assuming new research lines of interest.

Probabilistic meta-analysis of risk from the exposure to Hg in artisanal gold mining communities in Colombia

Colombia is one of the largest per capita mercury polluters in the world as a consequence of its artisanal gold mining activities. The severity of this problem in terms of potential health effects was evaluated by means of a probabilistic risk assessment carried out in the twelve departments (or provinces) in Colombia with the largest gold production. The two exposure pathways included in the risk assessment were inhalation of elemental Hg vapors and ingestion of fish contaminated with methyl mercury. Exposure parameters for the adult population (especially rates of fish consumption) were obtained from nation-wide surveys and concentrations of Hg in air and of methyl-mercury in fish were gathered from previous scientific studies. Fish consumption varied between departments and ranged from 0 to 0.3 kg d?1. Average concentrations of total mercury in fish (70 data) ranged from 0.026 to 3.3 lg g?1. A total of 550 individual measurements of Hg in workshop air (ranging from menor queDL to 1 mg m?3) and 261 measurements of Hg in outdoor air (ranging from menor queDL to 0.652 mg m?3) were used to generate the probability distributions used as concentration terms in the calculation of risk. All but two of the distributions of Hazard Quotients (HQ) associated with ingestion of Hg-contaminated fish for the twelve regions evaluated presented median values higher than the threshold value of 1 and the 95th percentiles ranged from 4 to 90. In the case of exposure to Hg vapors, minimum values of HQ for the general population exceeded 1 in all the towns included in this study, and the HQs for miner-smelters burning the amalgam is two orders of magnitude higher, reaching values of 200 for the 95th percentile. Even acknowledging the conservative assumptions included in the risk assessment and the uncertainties associated with it, its results clearly reveal the exorbitant levels of risk endured not only by miner-smelters but also by the general population of artisanal gold mining communities in Colombia.

Probabilistic assessment of risk from the exposure to mercury in artisanal gold mining communities in Colombia

Colombia is one the largest per capita mercury polluters as a consequence of its artisanal gold mining operations, which are steadily increasing following the rising price of this metal. Compared to gravimetric separation methods and cyanidation, the concentration of gold using Hg amalgams presents several advantages: the process is less time-consuming and minimizes gold losses, and Hg is easily transported and inexpensive relative to the selling price of gold. Very often, mercury amalgamation is carried out on site by unprotected workers. During this operation large amounts of mercury are discharged to the environment and eventually reach the fresh water bodies in the vicinity where it is subjected to methylation. Additionally, as gold is released from the amalgam by heating on open charcoal furnaces in small workshops, mercury vapors are emitted and inhaled by the artisanal smelters and the general population

Innovative tools to address drought risk in grazing lands

Drought spells can impose severe impacts in most vulnerable farms. It is well known that uninsured exposure exacerbates income inequality in farming systems. However, high administrative costs of traditional insurance hinder small farmers? access to risk management tools. The existence of moral hazard and systemic risk prevents the implementation of traditional insurance programs to address drought risk in rural areas. Innovative technologies like satellite images are being used to derive vegetation index which are highly correlated with drought impacts. The implementation of this technology in agricultural insurance may help to overcome some of the limitations of traditional insurance. However, basis risk has been identified as one of the main problems that hinder the acceptance of index insurance. In this paper we focus on the analyses of basis risk under different contract options in the grazing lands of the Araucanía region. A vegetation index database is used to develop an actuarial insurance model and estimate risk premiums for moderate and severe drought coverage. Risk premium sharply increases with risk coverage. In contrast with previous findings in the literature, our results are not conclusive and show that lowering the coverage level does not necessarily imply a reduction in basis risk. Further analyses of the relation between contract design and basis risk is a promising area of research that may render an important social utility for most vulnerable farming systems.

A review of the distribution of particulate trace elements in urban terrestrial environments and its application to considerations of risk

We review the evolution, state of the art and future lines of research on the sources, transport pathways, and sinks of particulate trace elements in urban terrestrial environments to include the atmosphere, soils, and street and indoor dusts. Such studies reveal reductions in the emissions of some elements of historical concern such as Pb, with interest consequently focusing on other toxic trace elements such as As, Cd, Hg, Zn, and Cu. While establishment of levels of these elements is important in assessing the potential impacts of human society on the urban environment, it is also necessary to apply this knowledge in conjunction with information on the toxicity of those trace elements and the degree of exposure of human receptors to an assessment of whether such contamination represents a real risk to the city’s inhabitants and therefore how this risk can be addressed.

Geochemistry and risk assessment of street dust in Luanda, Angola, a tropical urban environment

A total of 92 samples of street dust were collected in Luanda, Angola, were sieved below 100 μm, and analysed by ICP-MS for 35 elements after an aqua-regia digestion. The concentration and spatial heterogeneity of trace elements in the street dust of Luanda are generally lower than in most industrialized cities in the Northern hemisphere. These observations reveal a predominantly “natural” origin for the street dust in Luanda, which is also manifested in that some geochemical processes that occur in natural soils are preserved in street dust: the separation of uranium from thorium, and the retention of the former by carbonate materials, or the high correlation between arsenic and vanadium due to their common mode of adsorption on solid particles in the form of oxyanions. The only distinct anthropogenic fingerprint in the composition of Luanda's street dust is the association Pb–Cd–Sb–Cu (and to a lesser extent, Ba–Cr–Zn). The use of risk assessment strategies has proved helpful in identifying the routes of exposure to street dust and the trace elements therein of most concern in terms of potential adverse health effects. In Luanda the highest levels of risk seem to be associated (a) with the presence of As and Pb in the street dust and (b) with the route of ingestion of dust particles, for all the elements included in the study except Hg, for which inhalation of vapours presents a slightly higher risk than ingestion. However, given the large uncertainties associated with the estimates of toxicity values and exposure factors, and the absence of site-specific biometric factors, these results should be regarded as preliminary and further research should be undertaken before any definite conclusions regarding potential health effects are drawn.

Implementation of a module for risk of ozone impacts assessment to vegetation in the integrated assessment modelling system for the Iberian peninsula. Evaluation for wheat and holm oak

A module to estimate risks of ozone damage to vegetation has been implemented in the Integrated Assessment Modelling system for the Iberian Peninsula. It was applied to compute three different indexes for wheat and Holm oak; daylight AOT40 (cumulative ozone concentration over 40 ppb), cumulative ozone exposure index according to the Directive 2008/50/EC (AOT40-D) and PODY (Phytotoxic Ozone Dose over a given threshold of Y nmol m−2 s−1). The use of these indexes led to remarkable differences in spatial patterns of relative ozone risks on vegetation. Ozone critical levels were exceeded in most of the modelling domain and soil moisture content was found to have a significant impact on the results. According to the outputs of the model, daylight AOT40 constitutes a more conservative index than the AOT40-D. Additionally, flux-based estimations indicate high risk areas in Portugal for both wheat and Holm oak that are not identified by AOT-based methods.

Bioaccessibility of heavy metals and risk assessment in urban gardens of Madrid

Human health problems and solutions. Urban gardening has spread worldwide in recent years as it enhances food security and selfsupply and promotes community integration. However urban soils are significantly enriched in trace elements relative to background levels. Exposure to the soil in urban gardens may therefore result in adverse health effects depending on the degree of contact during gardening, infant recreational activities and ingestion of vegetables grown in them. In order to evaluate this potential risk, 36 composite samples were collected from the top 20 cm of the soil of 6 urban gardens in Madrid. The aqua regia (pseudototal) and glycine-extractable (bioaccessible) concentrations of Co, Cr, Cu, Ni, Pb and Zn were determined by atomic absorption spectrophotometry. Additionally, pH, texture, Fe, Ca, and Mn concentrations, and organic matter and calcium carbonate contents were determined in all urban gardens and their influence on trace element bioaccessibility was analyzed.