Price Formation and Real Estate Characteristics Residential Real Estate, Lisbon - Portugal

Análisis del proceso de formación de precios en el mercado residencial de Lisboa desde el punto de vista de la eliminación de los aspectos subjetivos de la apreciación por el tasador de las características de los inmuebles

Review of the Performance of Residential PV systems in Belgium

The main objective of this paper is to review the state of the art of residential PV systems in Belgium by the analysis of the operational data of 993 installations. For that, three main questions are posed: how much energy do they produce? What level of performance is associated to their production? Which are the key parameters that most influence their quality? This work brings answers to these questions. A middling commercial PV system, optimally oriented, produces a mean annual energy of 892 kWh/kWp. As a whole, the orientation of PV generators causes energy productions to be some 6% inferior to optimally oriented PV systems. The mean performance ratio is 78% and the mean performance index is 85%. That is to say, the energy produced by a typical PV system in Belgium is 15% inferior to the energy produced by a very high quality PV system. Finally, on average, the real power of the PV modules falls 5% below its corresponding nominal power announced on the manufacturer's datasheet. Differences between real and nominal power of up to 16% have been detected.

Review of the Performance of Residential PV systems in France

The main objective of this paper is to review the state of the art of residential PV systems in France. This is done analyzing the operational data of 6868 installations. Three main questions are posed. How much energy do they produce? What level of performance is associated to their production? Which are the key parameters that most influence their quality? During the year 2010, the PV systems in France have produced a mean annual energy of 1163 kWh/kWp. As a whole, the orientation of PV generators causes energy productions to be some 7% inferior to optimally oriented PV systems. The mean Performance Ratio is 76% and the mean Performance Index is 85%. That is to say, the energy produced by a typical PV system in France is 15% inferior to the energy produced by a very high quality PV system. On average, the real power of the PV modules falls 4.9% below its corresponding nominal power announced on the manufacturer's datasheet. A brief analysis by PV modules technology has led to relevant observations about two technologies in particular. On the one hand, the PV systems equipped with heterojunction with intrinsic thin layer (HIT) modules show performances higher than average. On the other hand, the systems equipped with the copper indium (di)selenide (CIS) modules show a real power that is 16% lower than their nominal value.

Next Generation of Energy Residential Gateways for Demand Response and Dynamic Pricing

Predictions about electric energy needs, based on current electric energy models, forecast that the global energy consumption on Earth for 2050 will double present rates. Using distributed procedures for control and integration, the expected needs can be halved. Therefore implementation of Smart Grids is necessary. Interaction between final consumers and utilities is a key factor of future Smart Grids. This interaction is aimed to reach efficient and responsible energy consumption. Energy Residential Gateways (ERG) are new in-building devices that will govern the communication between user and utility and will control electric loads. Utilities will offer new services empowering residential customers to lower their electric bill. Some of these services are Smart Metering, Demand Response and Dynamic Pricing. This paper presents a practical development of an ERG for residential buildings.

Performance Analysis of 10,000 Residential PV Systems in France and Belgium

The main objective of this paper is to review the state of the art of residential PV systems in France and Belgium. This is done analyzing the operational data of 10650 PV systems (9657 located in France and 993 in Belgium). Three main questions are posed. How much energy do they produce? What level of performance is associated to their production? Which are the key parameters that most influence their quality? During the year 2010, the PV systems in France have produced a mean annual energy of 1163 kWh/kWp in France and 852 kWh/kWp in Belgium. As a whole, the orientation of PV generators causes energy productions to be some 7% inferior to optimally oriented PV systems. The mean Performance Ratio is 76% in France and 78% in Belgium, and the mean Performance Index is 85% in both countries. On average, the real power of the PV modules falls 4.9% below its corresponding nominal power announced on the manufacturer?s datasheet. A brief analysis by PV modules technology has lead to relevant observations about two technologies in particular. On the one hand, the PV systems equipped with Heterojunction with Intrinsic. Thin layer (HIT) modules show performances higher than average. On the other hand, the systems equipped with Copper Indium (di)Selenide (CIS) modules show a real power that is 16 % lower than their nominal value.

The Economic Value of Residential Land in Historical Areas: An Application of the Residual Method to the Secondary Market

Land value bears significant weight in house prices in historical town centers. An essential aim for regulating the mortgage market, particularly in the financial and property crisis that countries such as Spain are undergoing, is to have at hand objective procedures for its valuation, whatever the conditions (location, construction, planning). Of all the factors contributing to house price make-up, the land is the only one whose value does not depend on acquisition cost, but rather on the location-time binomial. That is to say, the specific circumstances at that point and at the exact moment of valuation. For this reason, the most commonly applied procedure for land valuation in town centers is the use of the residual method: once the selling price of new housing in a district is known, the other necessary costs and expenses of development are deducted, including those of building and the developer’s profit. The value left is that of the land. To apply these procedures it is vital to have figures such as building costs, technical fees, tax costs, etc. But, above all, it is essential to obtain the selling price of the new housing. This is not always feasible, on account of the lack of newbuild development in this location. This shortage of information occurs in historical town cities, where urban renewal is slight due to the heritage-protection policies, and where, nevertheless there is substantial activity in the secondary market. In these circumstances, as an alternative for land valuation in consolidated urban areas, we have the adaptation of the residual method to the particular characteristics of the secondary market. To these ends, there is the proposal for the appreciation of the dwelling which follows, in a backwards direction, the application of traditional depreciation methods proposed by the various valuation manuals and guidelines. The reliability of the results obtained is analyzed by contrasting it with published figures for newly-built properties, according to different rules applied in administrative appraisals in Spain and the incidence of an eventual correction due to conservation state.

Environmental analysis of residential building facades through energy consumption, GHG emissions and costs

This paper provides some results on the potential to minimize environmental impacts in residential buildings life cycle, through façade design strategies, analyzing also their impact on costs from a lifecycle perspective. On one hand, it assesses the environmental damage produced by the materials of the building envelope, and on the other, the benefits they offer in terms of habitability and liveability in the use phase. The analysis includes several design parameters used both for rehabilitation of existing facades, as for new facades, trying to cover various determinants and proposing project alternatives. With this study we intended to contribute to address the energy challenges for the coming years, trying also to propose pathways for innovative solutions for the building envelope.

PV self-consumption optimization with storage and Active DSM for the residential sector

With the rising prices of the retail electricity and the decreasing cost of the PV technology, grid parity with commercial electricity will soon become a reality in Europe. This fact, together with less attractive PV feed-in-tariffs in the near future and incentives to promote self-consumption suggest, that new operation modes for the PV Distributed Generation should be explored; differently from the traditional approach which is only based on maximizing the exported electricity to the grid. The smart metering is experiencing a growth in Europe and the United States but the possibilities of its use are still uncertain, in our system we propose their use to manage the storage and to allow the user to know their electrical power and energy balances. The ADSM has many benefits studied previously but also it has important challenges, in this paper we can observe and ADSM implementation example where we propose a solution to these challenges. In this paper we study the effects of the Active Demand-Side Management (ADSM) and storage systems in the amount of consumed local electrical energy. It has been developed on a prototype of a self-sufficient solar house called “MagicBox” equipped with grid connection, PV generation, lead–acid batteries, controllable appliances and smart metering. We carried out simulations for long-time experiments (yearly studies) and real measures for short and mid-time experiments (daily and weekly studies). Results show the relationship between the electricity flows and the storage capacity, which is not linear and becomes an important design criterion.

Neural network controller for active demand side management with PV energy in the residential sector

In this paper, we describe the development of a control system for Demand-Side Management in the residential sector with Distributed Generation. The electrical system under study incorporates local PV energy generation, an electricity storage system, connection to the grid and a home automation system. The distributed control system is composed of two modules: a scheduler and a coordinator, both implemented with neural networks. The control system enhances the local energy performance, scheduling the tasks demanded by the user and maximizing the use of local generation.

Facade typologies as a tool for selecting refurbishment measures for the Spanish residential building stock

Today, the building sector alone accounts for 40% of the total energy consumption in the European Union (EU). In most EU member states, about 70–90% of the buildings were constructed at least 20 years ago. Due to this, these buildings have a worse energy efficiency behavior than the new ones that comply with current regulations. As a consequence, acting on the existing building stock is needed, developing special methods on assessment and advice in order to reduce the total energy consumption. This article addresses a procedure allowing the classification and characterization of existing buildings facades. It can help researchers to achieve in-depth knowledge of the facades construction and therefore knowing their thermal behavior. Once knowing that, the most appropriate upgrading strategies can be established with the purpose of reducing the energy demand. Furthermore, the classified facade typologies have been verified, complying with current and future Spanish regulations and according to the results obtained, a series of upgrading strategies based on the opaque part and those in the translucent part, have been proposed. As a conclusion, this procedure helps us to select the most appropriate improvement measures for each type of facade in order to comply with current and future Spanish regulations. This proposed method has been tested in a specific neighborhood of Madrid, in a selected period of time, between 1950 and 1980, but it could be applicable to any other city.

Analyzing climate change adaptation in the agriculture and water sectors: screening risks and opportunities.

As part of the Mediterranean area, the Guadiana basin in Spain is particularly exposed to increasing water stress due to climate change. Future warmer and drier climate will have negative implications for the sustainability of water resources and irrigation agriculture, the main socio- economic sector in the region. This paper illustrates a systematic analysis of climate change impacts and adaptation in the Guadiana basin based on a two-stage modeling approach. First, an integrated hydro-economic modeling framework was used to simulate the potential effects of regional climate change scenarios for the period 2000-2069. Second, a participatory multi-criteria technique, namely the Analytic Hierarchy Process (AHP), was applied to rank potential adaptation measures based on agreed criteria. Results show that, in the middle-long run and under severe climate change, reduced water availability, lower crop yields and increased irrigation demands might lead to water shortages, crop failure, and up to ten percent of income losses to irrigators. AHP results show how private farming adaptation measures, including improving irrigation efficiency and adjusting crop varieties, are preferred to public adaptation measures, such as building new dams. The integrated quantitative and qualitative methodology used in this research can be considered a socially-based valuable tool to support adaptation decision-making.

Analyzing adaptation to climate change in the water and the agricultural sectors in the Spanish Guadiana basin.

1. Introduction: setting and problem definition 2. The Adaptation Pathway –2.1 Stage 1: appraising risks and opportunities •Step 1: Impact analysis •Step 2: Policy analysis •Step 3: Socio-institutional analysis –2.2 Stage 2: appraising and choosing adaptation opt ions •Step 4: identifying and prioritizing adaptation o ptions 3. Conclusions

Residential self-selection and geographical scales in trip frequency.

Neighbourhood representation and scale used to measure the built environment have been treated in many ways. However, it is anything but clear what representation of neighbourhood is the most feasible in the existing literature. This paper presents an exhaustive analysis of built environment attributes through three spatial scales. For this purpose multiple data sources are integrated, and a set of 943 observations is analysed. This paper simultaneously analyses the influence of two methodological issues in the study of the relationship between built environment and travel behaviour: (1) detailed representation of neighbourhood by testing different spatial scales; (2) the influence of unobserved individual sensitivity to built environment attributes. The results show that different spatial scales of built environment attributes produce different results. Hence, it is important to produce local and regional transport measures, according to geographical scale. Additionally, the results show significant sensitivity to built environment attributes depending on place of residence. This effect, called residential sorting, acquires different magnitudes depending on the geographical scale used to measure the built environment attributes. Spatial scales risk to the stability of model results. Hence, transportation modellers and planners must take into account both effects of self-selection and spatial scales.

Sistema de gestión de residuos de construcción y demolición en obras de edificación residencial. Buenas prácticas en la ejecución de obra

En el sector de la edificación, las grandes constructoras comienzan a considerar aspectos medioambientales, no limitándose a lo establecido por la legislación vigente, y buscando la implementación de buenas prácticas. Si bien este hecho es una realidad para las grandes empresas constructoras, todavía falta que la gran mayoría de las empresas del sector (pequeñas y medianas) adopten ésta tendencia. En este sentido, las publicaciones y estadísticas consultadas revelan que el sector de la construcción sigue siendo el sector con menor número de Sistemas de Gestión Ambiental (SGA) certificados en comparación con otros sectores industriales, debido principalmente a las peculiaridades de su actividad. Por otra parte, el sector de la construcción genera grandes cantidades de residuos de construcción y demolición (RCD). Aunque, en los últimos años la actividad de la construcción ha disminuido, debido a la crisis económica del país, no hay que olvidar todos los problemas causados por este tipo de residuos, o mejor dicho, por su gestión. La gestión de los RCD actual está lejos de alcanzar la meta propuesta en la Directiva Marco de Residuos (DMR), la cual exige un objetivo global para el año 2020 en el que el 70% de todos los RCD generados deberán ser reciclados en los países de la UE. Pero, la realidad es que sólo el 50% de la RCD generados en la Unión Europea se recicla. Por este motivo, en los últimos años se ha producido una completa modificación del régimen jurídico aplicable a los RCD, incorporando importantes novedades a nuestro ordenamiento interno como son: la redacción de un Estudio de gestión de RCD (en fase de diseño) y un Plan de gestión de RCD (en fase de ejecución). Entre estas medidas destaca el poder conocer, con la antelación suficiente, la cantidad y el momento en que los RCD son generados, para así poder planificar la gestión más adecuada para cada categoría de RCD. Es por ello que el desarrollo de cualquier instrumento que determine la estimación de RCD así como iniciativas para su control debe ser considerado como una herramienta para dar respuestas reales en el campo de la sostenibilidad en la edificación. Por todo lo anterior, el principal objetivo de la Tesis Doctoral es mejorar la gestión actual de los RCD, a través de la elaboración e implementación en obra de un Sistema de gestión de RCD en fase de ejecución que podrá ser incluido en el Sistema de Gestión Ambiental de las empresas constructoras. Para ello, se ha identificado la actividad que más residuo genera, así como las diferentes categorías de RCD generadas durante su ejecución, a través del análisis de nueve obras de edificación de nueva planta. Posteriormente, se han determinado y evaluado, en función de su eficacia y viabilidad, veinte buenas prácticas encaminadas a reducir la generación de RCD. También, se han identificado y evaluado, en función de su coste económico, cinco alternativas de gestión para cada categoría de RCD generada. Por último, se ha desarrollado e implementado un Sistema de Gestión de RCD en una empresa de construcción real. En definitiva, el Sistema de Gestión de RCD propuesto contiene una herramienta de estimación de RCD y también proporciona una relación de buenas prácticas, según su viabilidad y eficacia, sobre los aspectos más significativos en cuanto a la gestión de RCD se refiere. El uso de este Sistema de gestión de RCD ayudará a los técnicos de la construcción en el desarrollo de los documentos "Estudio de gestión de RCD " y "Plan de gestión de RCD " - requeridos por ley -. Además, el Sistema promueve la gestión ambiental de la empresa, favoreciendo la cohesión del proceso constructivo, estableciendo responsabilidades en el ámbito de RCD y proporcionando un mayor control sobre el proceso. En conclusión, la implementación de un sistema de gestión de RCD en obra ayuda a conseguir una actividad de edificación, cuyo principal objetivo sea la generación de residuos cero. ABSTRACT Currently, in the building sector, the main construction companies are considering environmental issues, not being limited to the current legislation, and seeking the implementation of good practices. While this fact is a reality for large construction companies, still the vast majority of construction companies (small and medium enterprises) need to accept this trend. In this sense, official publications and statistics reveal that the construction sector remains with the lowest number of certified Environmental Management Systems (EMS) compared to other industrial sectors, mainly due to the peculiarities of its activity. Moreover, the construction industry in Spain generates large volumes of construction and demolition waste (CDW) achieving a low recycling rate compared to other European Union countries and to the target set for 2020. Despite the complete change in the legal regime for CDW in Spain, there are still several difficulties for their application at the construction works. Among these difficulties the following can be highlighted: onsite segregation, estimating CDW generation and managing different CDW categories. Despite these difficulties, the proper CDW management must be one of the main aspects considered by construction companies in the EMS. However, at present the EMS used in construction companies consider very superficially CDW management issues. Therefore, current EMS should go a step further and include not only procedures for managing CDW globally, but also specific procedures for each CDW category, taking into account best practices for prevention, minimization and proper CDW management in order to achieve building construction works with zero waste generation. The few scientific studies analysing EMS implementation in construction enterprises focus on studying the benefits and barriers of their implementation. Despite the drawbacks found, implementing an EMS would bring benefits such as improving the corporate image in relation to the environment, ensuring compliance with the law or reducing environmental risks. Also, the international scientific community has shown great interest in defining models to estimate in advance the CDW that will be generated during the building construction or rehabilitation works. These studies analyse the overall waste generation and its different CDW categories. However, despite the many studies found on CDW quantification, analysing its evolution throughout the construction activities is a factor that must be further studied and discussed in greater depth, as results would be of great significance when planning the CDW management. According to the scientific studies analysing the implementation of good environmental practices in construction sites, it seems that, in general, the CDW collection system is done in a decentralized manner by each subcontracted company. In addition, the corporate image generated when poor practices are done may adversely affect the company's reputation and can result in loss of contracts. Finally, although there are numerous guides and manuals of good practices for CDW management, no references have been found implementing these measures in the Environmental Management System of the construction companies. From all the above, this thesis aims to provide answers to reduce the environmental impact caused by CDW generation in building construction works, in order to get a building process with zero waste generation. In this sense, is essential to generate new knowledge in order to implement a system which can carry out comprehensive management of CDW generated onsite, at the design stage until the end of its life cycle, taking into account both technical and economic criteria. Therefore, the main objective of this thesis is to define and implement a CDW management system for residential building construction works, helping construction agents not only to manage the CDW in accordance with current legislation, but also minimizing their generation on site by applying best practices, resulting in achieving the goal of zero waste in building works.

Propuesta de un modelo de sistema de información interorganizacional: aplicación en el sector de la domótica para la gestión de servicios del hogar digital

El sector de la edificación es uno de los principales sectores económicos en España y, además, es un componente básico de la actividad económica y social, debido a su importante papel como generador de empleo, proveedor de bienes e incentivador del crecimiento. Curiosamente, es uno de los sectores con menos regulación y organización y que, además, está formado mayoritariamente por empresas de pequeña y mediana dimensión (pymes) que, por su menor capacidad, a menudo, se quedan detrás de las grandes empresas en términos de adopción de soluciones innovadoras. La complejidad en la gestión de toda la información relacionada con un proyecto de edificación ha puesto de manifiesto claras ineficiencias que se traducen en un gasto innecesario bastante representativo. La información y los conocimientos aprendidos rara vez son transmitidos de una fase a otra dentro del proyecto de edificación y, mucho menos, reutilizados en otros proyectos similares. De este modo, no sólo se produce un gasto innecesario, sino que incluso podemos encontrar información contradictoria y obsoleta y, por tanto, inútil para la toma de decisiones. A lo largo de los años, esta situación ha sido motivada por la propia configuración del sector, poniendo de manifiesto la necesidad de una solución que pudiera solventar este reto de gestión interorganizacional. Así, la cooperación interorganizacional se ha convertido en un factor clave para mejorar la competitividad de las organizaciones, típicamente pymes, que componen el sector de la edificación. La información es la piedra angular de cualquier proceso de negocio. Durante la última década, una amplia gama de industrias han experimentado importantes mejoras de productividad con la aplicación eficiente de las TIC, asociadas, principalmente, a incrementos en la velocidad de proceso de información y una mayor coherencia en la generación de datos, accesibilidad e intercambio de información. La aplicación eficaz de las TIC en el sector de la edificación requiere una combinación de aspectos estratégicos y tácticos, puesto que no sólo se trata de utilizar soluciones puntuales importadas de otros sectores para su aplicación en diferentes áreas, sino que se buscaría que la información multi-agente estuviera integrada y sea coherente para los proyectos de edificación. El sector de la construcción ha experimentado un descenso significativo en los últimos años en España y en Europa como resultado de la crisis financiera que comenzó en 2007. Esta disminución está acompañada de una baja penetración de las TIC en la interorganizacionales orientadas a los procesos de negocio. El descenso del mercado ha provocado una desaceleración en el sector de la construcción, donde sólo las pymes flexibles han sido capaces de mantener el ritmo a pesar de la especialización y la innovación en los servicios adaptados a las nuevas demandas del mercado. La industria de la edificación está muy fragmentada en comparación con otras industrias manufactureras. El alto grado de esta fragmentación está íntimamente relacionado con un impacto significativo en la productividad y el rendimiento. Muchos estudios de investigación han desarrollado y propuesto una serie de modelos de procesos integrados. Por desgracia, en la actualidad todavía no se está en condiciones para la formalización de cómo debe ser la comunicación y el intercambio de información durante el proceso de construcción. El paso del proceso secuencial tradicional a los procesos de interdependencia recíproca sin lugar a duda son una gran demanda asociada a la comunicación y el flujo de información en un proyecto de edificación. Recientemente se está poniendo mucho énfasis en los servicios para el hogar como un primer paso hacia esta mejora en innovación ya que la industria de los servicios digitales interactivos tiene un alto potencial para generar innovación y la ventaja estratégica para las empresas existentes. La multiplicidad de servicios para el hogar digital (HD) y los proveedores de servicios demandan, cada vez más, la aparición de una plataforma capaz de coordinar a todos los agentes del sector con el usuario final. En consecuencia, las estructuras organizacionales tienden a descentralizarse en busca de esa coordinación y, como respuesta a esta demanda, se plantea, también en este ámbito, el concepto de cooperación interorganizacional. Por lo tanto, ambos procesos de negocio -el asociado a la construcción y el asociado a la provisión de servicios del hogar digital, también considerado como la propia gestión de ese hogar digital o edificio, inteligente o no- deben de ser vistos en su conjunto mediante una plataforma tecnológica que les dé soporte y que pueda garantizar la agregación e integración de los diversos procesos, relacionados con la construcción y gestión, que se suceden durante el ciclo de vida de un edificio. Sobre esta idea y atendiendo a la evolución permanente de los sistemas de información en un entorno de interrelación y cooperación daría lugar a una aplicación del concepto de sistema de información interorganizacional (SIIO). El SIIO proporciona a las organizaciones la capacidad para mejorar los vínculos entre los socios comerciales a lo largo de la cadena de suministro, por lo que su importancia ha sido reconocida por organizaciones de diversos sectores. Sin embargo, la adopción de un SIIO en diferentes ámbitos ha demostrado ser complicada y con una alta dependencia de las características particulares de cada sector, siendo, en este momento, una línea de investigación abierta. Para contribuir a esta línea de investigación, este trabajo pretende recoger, partiendo de una revisión de la literatura relacionada, un enfoque en un modelo de adopción de un SIIO para el objeto concreto de esta investigación. El diseño de un SIIO está basado principalmente, en la identificación de las necesidades de información de cada uno de sus agentes participantes, de ahí la importancia en concretar un modelo de SIIO en el ámbito de este trabajo. Esta tesis doctoral presenta el modelo de plataforma virtual de la asociación entre diferentes agentes del sector de la edificación, el marco de las relaciones, los flujos de información correspondientes a diferentes procesos y la metodología que subyace tras el propio modelo, todo ello, con el objeto de contribuir a un modelo unificado que dé soporte tanto a los procesos relacionados con la construcción como con la gestión de servicios en el hogar digital y permitiendo cubrir los requisitos importantes que caracterizan este tipo de proyectos: flexibilidad, escalabilidad y robustez. El SIIO se ha convertido en una fuente de innovación y una herramienta estratégica que permite a las pymes obtener ventajas competitivas. Debido a la complejidad inherente de la adopción de un SIIO, esta investigación extiende el modelo teórico de adopción de un SIIO de Kurnia y Johnston (2000) con un modelo empírico para la caracterización de un SIIO. El modelo resultante tiene como objetivo fomentar la innovación de servicios en el sector mediante la identificación de los factores que influyen en la adopción de un SIIO por las pymes en el sector de la edificación como fuente de ventaja competitiva y de colaboración. Por tanto, esta tesis doctoral, proyectada sobre una investigación empírica, proporciona un enfoque para caracterizar un modelo de SIIO que permita dar soporte a la gestión integrada de los procesos de construcción y gestión de servicios para el hogar digital. La validez del modelo de SIIO propuesto, como fuente y soporte de ventajas competitivas, está íntimamente relacionada con la necesidad de intercambio de información rápido y fiable que demandan los agentes del sector para mejorar la gestión de su interrelación y cooperación con el fin de abordar proyectos más complejos en el sector de la edificación, relacionados con la implantación del hogar digital, y contribuyendo, así a favorecer el desarrollo de la sociedad de la información en el segmento residencial. ABSTRACT The building industry is the largest industry in the world. Land purchase, building design, construction, furnishing, building equipment, operations maintenance and the disposition of real estate have an unquestionable prominence not only at economic but also at social level. In Spain, the building sector is one of the main drivers of economy and also a basic component of economic activity and its role in generating employment, supply of goods or incentive for growth is crucial in the evolution of the economy. Surprisingly, it is one of the sectors with less regulation and organization. Another consistent problem is that, in this sector, the majority of companies are small and medium (SMEs), and often behind large firms in terms of their adoption of innovative solutions. The complexity of managing all information related to this industry has lead to a waste of money and time. The information and knowledge gathered is frequently stored in multiple locations, involving the work of thousands of people, and is rarely transferred on to the next phase. This approach is inconsistent and makes that incorrect information is used for decisions. This situation needs a viable solution for interorganizational information management. So, interorganizational co-operation has become a key factor for organization competitiveness within the building sector. Information is the cornerstone of any business process. Therefore, information and communication technologies (ICT) offer a means to change the way business is conducted. During the last decade, significant productivity improvements were experienced by a wide range of industries with ICT implementation. ICT has provided great advantages in speed of operation, consistency of data generation, accessibility and exchange of information. The wasted money resulting from reentering information, errors and omissions caused through poor decisions and actions, and the delays caused while waiting for information, represent a significant percentage of the global benefits. The effective application of ICT in building construction sector requires a combination of strategic and tactical developments. The building sector has experienced a significant decline in recent years in Spain and in Europe as a result of the financial crisis that began in 2007. This drop goes hand in hand with a low penetration of ICT in inter-organizational-oriented business processes. The market decrease has caused a slowdown in the building sector, where only flexible SMEs have been able to keep the pace though specialization and innovation in services adapted to new market demands. The building industry is highly fragmented compared with other manufacturing industries. This fragmentation has a significant negative impact on productivity and performance. Many research studies have developed and proposed a number of integrated process models. Unfortunately, these studies do not suggest how communication and information exchange within the construction process can be achieved, without duplication or lost in quality. A change from the traditional sequential process to reciprocal interdependency processes would increase the demand on communication and information flow over the edification project. Focusing on home services, the digital interactive service industry has the potential to generate innovation and strategic advantage for existing business. Multiplicity of broadband home services (BHS) and suppliers suggest the need for a figure able to coordinate all the agents in sector with the final user. Consequently, organizational structures tend to be decentralized. Responding to this fact, the concept of interorganizational co-operation also is raising in the residential market. Therefore, both of these business processes, building and home service supply, must be complemented with a technological platform that supports these processes and guarantees the aggregation and integration of the several services over building lifecycle. In this context of a technological platform and the permanent evolution of information systems is where the relevance of the concept of inter-organizational information system (IOIS) emerges. IOIS improves linkages between trading partners along the supply chain. However, IOIS adoption has proved to be difficult and not fully accomplished yet. This research reviews the literature in order to focus a model of IOIS adoption. This PhD Thesis presents a model of virtual association, a framework of the relationships, an identification of the information requirements and the corresponding information flows, using the multi-agent system approach. IOIS has become a source of innovation and a strategic tool for SMEs to obtain competitive advantage. Because of the inherent complexity of IOIS adoption, this research extends Kurnia and Johnston’s (2000) theoretical model of IOIS adoption with an empirical model of IOIS characterization. The resultant model aims to foster further service innovation in the sector by identifying the factors influencing IOIS adoption by the SMEs in the building sector as a source of competitive and collaborative advantage. Therefore, this PhD Thesis characterizes an IOIS model to support integrated management of building processes and home services. IOIS validity, as source and holder of competitive advantages, is related to the need for reliable information interchanges to improve interrelationship management. The final goal is to favor tracking of more complex projects in building sector and to contribute to consolidation of the information society through the provision of broadband home services and home automation.