Engineering privacy requirements valuable lessons from another realm

The Privacy by Design approach to systems engineering introduces privacy requirements in the early stages of development, instead of patching up a built system afterwards. However, 'vague', 'disconnected from technology', or 'aspirational' are some terms employed nowadays to refer to the privacy principles which must lead the development process. Although privacy has become a first-class citizen in the realm of non-functional requirements and some methodological frameworks help developers by providing design guidance, software engineers often miss a solid reference detailing which specific, technical requirements they must abide by, and a systematic methodology to follow. In this position paper, we look into a domain that has already successfully tackled these problems -web accessibility-, and propose translating their findings into the realm of privacy requirements engineering, analyzing as well the gaps not yet covered by current privacy initiatives.

Identifying Moderator Variables Through Requirements Elicitation Experiments Limitations

Interviews are the most widely used elicitation technique in Requirements Engineering (RE). Despite its importance, research in interviews is quite limited, in particular from an experimental perspective. We have performed a series of experiments exploring the relative effectiveness of structured and unstructured interviews. This line of research has been active in Information Systems in the past years, so that our experiments can be aggregated together with existing ones to obtain guidelines for practice. Experimental aggregation is a demanding task. It requires not only a large number of experiments, but also considering the influence of the existing moderators. However, in the current state of the practice in RE, those moderators are unknown. We believe that analyzing the threats to validity in interviewing experiments may give insight about how to improve further replications and the corresponding aggregations. It is likely that this strategy may be applied in other Software Engineering areas as well.

A software process improvement solution for small and medium-size enterprises

The focus of this paper is to outline the main structure of an alternative software process improvement method for small- and medium-size enterprises. This method is based on the action package concept, which helps to institutionalize the effective practices with affordable implementation costs. This paper also presents the results and lessons learned when this method was applied to three enterprises in the requirements engineering domain.

Conceptualización de requerimientos: Propuesta de proceso y técnicas asociadas

El proceso de captura de requisitos constituye un proceso con connotaciones sociales relacionadas con diferentes personas (stakeholders), una circunstancia que hace que ciertos problemas se presenten cuando se lleva adelante el proceso de conceptualización de requisitos. Se propone un proceso de conceptualización de requisitos que se estructura en dos fases: (a) Análisis Orientado a al Problema: cuyo objetivo es comprender el problema dado por el usuario en el dominio en el que este se lleva a cabo, y (b) Análisis de Orientado al Producto: cuyo objetivo es obtener las funcionalidades que el usuario espera del producto de software a desarrollar, teniendo en cuenta la relación de estas con la realidad expresada por el usuario en su discurso. Se proponen seis técnicas que articulan cada una de las tareas que componen las fases de proceso propuesto.

Application of knowledge engineering acquisition techniques to requirements capture: a case study

In this paper we want to point out, by means of a case study, the importance of incorporating some knowledge engineering techniques to the processes of software engineering. Precisely, we are referring to the knowledge eduction techniques. We know the difficulty of requirements acquisition and its importance to minimise the risks of a software project, both in the development phase and in the maintenance phase. To capture the functional requirements use cases are generally used. However, as we will show in this paper, this technique is insufficient when the problem domain knowledge is only in the "experts? mind". In this situation, the combination of the use case with eduction techniques, in every development phase, will let us to discover the correct requirements.

Rapid prototyping for biomedical engineering: current capabilities and Challenges

A new set of manufacturing technologies has emerged in the past decades to address market requirements in a customized way and to provide support for research tasks that require prototypes. These new techniques and technologies are usually referred to as rapid prototyping and manufacturing technologies, and they allow prototypes to be produced in a wide range of materials with remarkable precision in a couple of hours. Although they have been rapidly incorporated into product development methodologies, they are still under development, and their applications in bioengineering are continuously evolving. Rapid prototyping and manufacturing technologies can be of assistance in every stage of the development process of novel biodevices, to address various problems that can arise in the devices' interactions with biological systems and the fact that the design decisions must be tested carefully. This review focuses on the main fields of application for rapid prototyping in biomedical engineering and health sciences, as well as on the most remarkable challenges and research trends.

Verifying ontology requirements with SWIP

Verifying whether an ontology meets the set of established requirements is a crucial activity in ontology engineering. In this sense, methods and tools are needed (a) to transform (semi-)automatically functional ontology requirements into SPARQL queries, which can serve as unit tests to verify the ontology, and (b) to check whether the ontology fulfils the requirements. Thus, our purpose in this poster paper is to apply the SWIP approach to verify whether an ontology satisfies the set of established requirements.

Ontology Requirements Specification

The goal of the ontology requirements specification activity is to state why the ontology is being built, what its intended uses are, who the end users are, and which requirements the ontology should fulfill. This chapter presents detailed methodological guidelines for specifying ontology requirements efficiently. These guidelines will help ontology engineers to capture ontology requirements and produce the ontology requirements specification document (ORSD). The ORSD will play a key role during the ontology development process because it facilitates, among other activities, (1) the search and reuse of existing knowledge resources with the aim of reengineering them into ontologies, (2) the search and reuse of ontological resources (ontologies, ontology modules, ontology statements as well as ontology design patterns), and (3) the verification of the ontology along the ontology development.

Assesing the usefulness of the ACM/IEEE-CS Computing Curricula for the design of Computer-Related Engineering Curricula, an experience in Telematics

This paper presents the rationale to build up a Telematics Engineering curriculum. Telematics is a strongly computing oriented area; then, the authors have initially intended to apply the common requirements described in the computing curricula elaborated by the ACM/EEEE-CS Joint Curriculum Task Force. This experience has revealed some problematic aspects in the ACM/IEEE-CS proposal. From the analysis of these problems, a model to guide the selection and specially the approach of the Telematics curriculum contents is proposed. This model can be easily generalized to other strongly computing oriented curricula, whose number is growing everyday

Towards model-driven engineering for mixed-criticality systems: multiPARTES approach

Mixed criticality systems emerges as a suitable solution for dealing with the complexity, performance and costs of future embedded and dependable systems. However, this paradigm adds additional complexity to their development. This paper proposes an approach for dealing with this scenario that relies on hardware virtualization and Model-Driven Engineering (MDE). Hardware virtualization ensures isolation between subsystems with different criticality levels. MDE is intended to bridge the gap between design issues and partitioning concerns. MDE tooling will enhance the functional models by annotating partitioning and extra-functional properties. System partitioning and subsystems allocation will be generated with a high degree of automation. System configuration will be validated for ensuring that the resources assigned to a partition are sufficient for executing the allocated software components and that time requirements are met.

System Engineering Approach to Initial Design of LEO Remote Sensing Missions

The satellite remote sensing missions are essential for long-term research around the condition of the earth resources and environment. On the other hand, in recent years the application of microsatellites is of interest in many space programs for their less cost and response time. In microsatellite remote sensing missions there are tight interrelations between different requirements such as orbital altitude, revisit time, mission life and spatial resolution. Also, all of these requirements can affect the whole system level design characteristics. In this work, the remote sensing microsatellite sizing process is divided into three major design disciplines; a) orbit design, b) payload sizing and c) bus sizing. Finally, some specific design cases are investigated inside the design space for evaluating the effect of different design variables on the satellite total mass. Considering the results of the work, it is concluded that applying a systematic approach at the initial design phase of such projects provides a good insight to the not clearly seen interactions inside their highly extended design space

Emotions and the Engineering of Adaptiveness in Complex Systems

A major challenge in the engineering of complex and critical systems is the management of change, both in the system and in its operational environment. Due to the growing of complexity in systems, new approaches on autonomy must be able to detect critical changes and avoid their progress towards undesirable states. We are searching for methods to build systems that can tune the adaptability protocols. New mechanisms that use system-wellness requirements to reduce the influence of the outer domain and transfer the control of uncertainly to the inner one. Under the view of cognitive systems, biological emotions suggests a strategy to configure value-based systems to use semantic self-representations of the state. A method inspired by emotion theories to causally connect to the inner domain of the system and its objectives of wellness, focusing on dynamically adapting the system to avoid the progress of critical states. This method shall endow the system with a transversal mechanism to monitor its inner processes, detecting critical states and managing its adaptivity in order to maintain the wellness goals. The paper describes the current vision produced by this work-in-progress.

Enhancing regression models for complex systems using evolutionary techniques for feature engineering

This work proposes an automatic methodology for modeling complex systems. Our methodology is based on the combination of Grammatical Evolution and classical regression to obtain an optimal set of features that take part of a linear and convex model. This technique provides both Feature Engineering and Symbolic Regression in order to infer accurate models with no effort or designer's expertise requirements. As advanced Cloud services are becoming mainstream, the contribution of data centers in the overall power consumption of modern cities is growing dramatically. These facilities consume from 10 to 100 times more power per square foot than typical office buildings. Modeling the power consumption for these infrastructures is crucial to anticipate the effects of aggressive optimization policies, but accurate and fast power modeling is a complex challenge for high-end servers not yet satisfied by analytical approaches. For this case study, our methodology minimizes error in power prediction. This work has been tested using real Cloud applications resulting on an average error in power estimation of 3.98%. Our work improves the possibilities of deriving Cloud energy efficient policies in Cloud data centers being applicable to other computing environments with similar characteristics.

Emotions and the Engineering of Adaptiveness in Complex Systems

A major challenge in the engineering of complex and critical systems is the management of change, both in the system and in its operational environment. Due to the growing of complexity in systems, new approaches on autonomy must be able to detect critical changes and avoid their progress towards undesirable states. We are searching for methods to build systems that can tune the adaptability protocols. New mechanisms that use system-wellness requirements to reduce the influence of the outer domain and transfer the control of uncertainly to the inner one. Under the view of cognitive systems, biological emotions suggests a strategy to configure value-based systems to use semantic self-representations of the state. A method inspired by emotion theories to causally connect to the inner domain of the system and its objectives of wellness, focusing on dynamically adapting the system to avoid the progress of critical states. This method shall endow the system with a transversal mechanism to monitor its inner processes, detecting critical states and managing its adaptivity in order to maintain the wellness goals. The paper describes the current vision produced by this work-in-progress.

Strengthening and measuring project management competences of engineering students

Since 2010 the Industrial Engineering School at Universidad Politécnica de Madrid (ETSII UPM) has its Plan Study accredited by ABET. Since then a big motivation has been promoted from the management team encouraging teachers to work on the measurement and strengthening of student¿s competences. Generic skills or behavior acquired significant importance in the workplace, particularly in relation to project management. Because of this, and framed within the requirements of the European Higher Education Area (EHEA), the curriculum of the new degrees are being developed under the competence-based learning. This situation leads to the need to have a clear measurement tool skills as a basis for developing them within the curriculum. A group of multidisciplinary teachers have been working together during two years to design measuring instruments valid for engineering students.