13 resultados para Regimes Políticos
em Universidad Politécnica de Madrid
Resumo:
Radiative shock waves play a pivotal role in the transport energy into the stellar medium. This fact has led to many efforts to scale the astrophysical phenomena to accessible laboratory conditions and their study has been highlighted as an area requiring further experimental investigations. Low density material with high atomic mass is suitable to achieve radiative regime, and, therefore, low density xenon gas is commonly used for the medium in which the radiative shock propagates. In this work the averageionization and the thermodynamicregimes of xenonplasmas are determined as functions of the matter density and temperature in a wide range of plasma conditions. The results obtained will be applied to characterize blastwaveslaunched in xenonclusters
Resumo:
The amplification of high-order harmonics (HOH) in a plasma-based amplifier is a multiscale, temporal phenomenon that couples plasma hydrodynamics, atomic processes, and HOH electromagnetic fields. We use a one-dimensional, time-dependent Maxwell-Bloch code to compare the natural amplification regime and another regime where plasma polarization is constantly forced by the HOH. In this regime, a 10-MW (i.e., 100 times higher than current seeded soft x-ray laser power), 1.5-μJ, 140-fs pulse free from the parasitic temporal structures appearing on the natural amplification regime can be obtained.
Resumo:
Fort the last decades Spanish vineyard has experience a deep transformation by allowing irrigation, changing the traditional bush into a possible full mechanized VSP and cultivar changing map was also took into account. Tempranillo has led the change to replace the white grapevines, such as in La Mancha; however results in these warm areas were not as expect. Under this conditions, low yield, low acidity and uncouple sacharimetric and phenol maturity usually is obtained. Within this frame an experimental trial was set up with the goal to know other cultivars that could better perform than Tempranillo in warm areas in a sustainable viticulture.
Resumo:
The one-dimensional self-similar motion of an initially cold, half-space plasma of electron density n,produced by the (anomalous) absorption of a laser pulse of irradiation
regimes, the critical plane lies far in the expansion tail. The results break down when the density is so small that the plasma becomes collisionless. The analysis is also invalid for a too small. Using results previously found for a>€~4'3, a qualitative discussion of how plasma behavior changes with a, is given.
Resumo:
Soil tomography and morphological functions built over Minkowski functionals were used to describe the impact on pore structure of two soil management practices in a Mediterranean vineyard. Soil structure controls important physical and biological processes in soil–plant–microbial systems. Those processes are dominated by the geometry of soil pore structure, and a correct model of this geometry is critical for understanding them. Soil tomography has been shown to provide rich three-dimensional digital information on soil pore geometry. Recently, mathematical morphological techniques have been proposed as powerful tools to analyze and quantify the geometrical features of porous media. Minkowski functionals and morphological functions built over Minkowski functionals provide computationally efficient means to measure four fundamental geometrical features of three-dimensional geometrical objects, that is, volume, boundary surface, mean boundary surface curvature, and connectivity. We used the threshold and the dilation and erosion of three-dimensional images to generate morphological functions and explore the evolution of Minkowski functionals as the threshold and as the degree of dilation and erosion changes. We analyzed the three-dimensional geometry of soil pore space with X-ray computed tomography (CT) of intact soil columns from a Spanish Mediterranean vineyard by using two different management practices (conventional tillage versus permanent cover crop of resident vegetation). Our results suggested that morphological functions built over Minkowski functionals provide promising tools to characterize soil macropore structure and that the evolution of morphological features with dilation and erosion is more informative as an indicator of structure than moving threshold for both soil managements studied.
Resumo:
El siglo XX ha sido el siglo de los desplazamientos. Una ingente cantidad de personas fueron forzadas por motivos políticos, o se vieron obligadas por motivos económicos, a abandonar sus territorios de origen, generando un distanciamiento que en la mayoría de los casos resultaría irrecuperable. Las penurias vividas en Europa, las oportunidades que se abrían en países americanos, o la presión ejercida por los regímenes totalitarios, llevaron a un buen número de profesionales, artistas e intelectuales europeos a territorio americano. El presente trabajo se propone indagar sobre una de esas migraciones que se establecieron en Latinoamérica en la primera mitad del siglo XX: la de los arquitectos españoles que se vieron forzados al exilio. Para ello se busca poner en evidencia no sólo sus aportaciones sino también la influencia que ejerció en su obra la cultura de los países de adopción. Venezuela recibió gran parte del contingente de arquitectos españoles desplazados como consecuencia de la Guerra Civil. Tras México fue el país que mayor número acogió. La llegada de dichos exiliados coincidió con el momento en que la sociedad venezolana, de base agrícola y comercial, pasaría a evidenciar el impacto de la revolución petrolera. Así pues, dicha llegada supuso no sólo la dramática pérdida del mundo previo, implícita en todo exilio, sino el arribo a una sociedad en profundo proceso de cambio. En ambos casos se trataba de “mundos que se desvanecen”. Se propone la asunción de la obra de dichos profesionales como una arquitectura desplazada. Un desplazamiento que se produce en dos sentidos: por un lado, se trata de un desplazamiento físico, por otro, la palabra desplazada habla también de la condición secundaria que adquiere la arquitectura ante el drama vital y de supervivencia que afectó a los exiliados. Así pues, a un desplazamiento físico, verificable, se une un desplazamiento en cuanto al nivel de importancia y de atención asignado a la arquitectura. El trabajo comprende una introducción, cuatro capítulos, y un epílogo, a modo de conclusión. A lo largo de dichos capítulos se conjugan el enfoque individual en la obra de uno de estos arquitectos desterrados, Rafael Bergamín, y la visión “coral” de diversas trayectorias vitales que enfrentaron un destino común. Se elige la figura de Bergamín como eje de desarrollo debido a la presencia significativa que tuvo su obra tanto en España como en Venezuela, y por la caracterización de la misma como obra construida en colaboración. La introducción, “Exilios arquitectónicos”, muestra el sustrato estructural, la fundamentación y la metodología empleada, incluyendo “problematizaciones” sobre el exilio arquitectónico. El primer capítulo, “Memoria de partida”, da cuenta de la formación y actuación, durante la preguerra, de los arquitectos españoles que saldrían al exilio. Se introduce un esquema de base generacional y se revela un panorama para nada unívoco. El segundo capítulo, “Guerra y salida al exilio”, aborda la actuación de dichos arquitectos durante la contienda bélica así como la posterior dispersión general del exilio. El tercer capítulo, “Construir desde lo que se desvanece. Arquitectos del exilio español en Venezuela”, propone diversos presupuestos conceptuales en torno al tema del desplazamiento en la arquitectura, revisando la adscripción disciplinar y profesional de los arquitectos españoles exiliados en Venezuela. El cuarto capítulo, “El regreso”, versa sobre el recorrido final de estos arquitectos. Como marco general, se revisa su itinerario de regreso o, en muchos casos, la imposibilidad de retorno. Por último, se dispone la fuente de los diversos documentos de archivos y repositorios, así como el aparato bibliográfico y referencial, empleados en la investigación. Tres anexos se adjuntan al corpus del trabajo. El primero presenta documentos inéditos, hallados durante el pertinente proceso de investigación; el segundo, dibujos de Bergamín, básicamente de las primeras décadas del siglo XX: caricaturas, anuncios y trabajos de la Escuela; el tercero, un esbozo biográfico de los arquitectos del exilio español. ABSTRACT The 20th Century has been the century of displacements. An enormous number of people were forced to leave their homelands for political or economic reasons, which generated a gap that in most of the cases would be unrecoverable. The hardships that people had to endure in Europe, the opportunities that emerged in American countries, or the pressure exerted by totalitarian regimes drove a good number of European professionals, artists and intellectuals to American territory. This research study is intended to investigate one of those migrations that settled in Latin America during the first half of the 20th century: the one of the Spanish architects that were forced into exile. To achieve this, an attempt was made to expose not only their contributions but also the influence that the culture of the countries which welcomed them exerted in their work. Venezuela received a large portion of Spanish architects who were displaced as a consequence of the Civil War. After Mexico, it was the country that sheltered the greatest number of persons. The arrival of these exiled Spanish architects coincided with the moment in which the Venezuelan society – based on agriculture and commerce – would witness the impact of the revolution of the oil industry. Thus, their arrival supposed not only experiencing the dramatic loss of their previous world – implicit in the notion of the exile – but also settling in a society going through a profound change process. In both cases it was about “two worlds that were vanishing.” The assumption of these architects’ work is regarded as a displaced architecture. A displacement that takes place in two ways: on one hand, there was a physical displacement, and on the other hand, the word displaced also talks about the second place that architecture is given when confronted with the urgent drama of survival that affected the exiled community. Hence, a physical, verifiable displacement is combined with a displacement that has to do with the importance and the attention given to architecture. This research study encompasses an introduction, four chapters, and an epilogue as a conclusion. Throughout the chapters, the individual approach to the work of one of these exiled architects, Rafael Bergamín, runs in parallel to an overall view of various other architects’ career paths that faced a common destiny. The work of the architect Bergamín was chosen as the center of this research study due to the significant presence that his work had in Spain as well as in Venezuela, and because its main characteristic was that it was built in collaboration with other architects. The introduction, “Architectural exiles”, shows the structural contextualization, the explanatory thesis statement and the methodology used, including “problematizations” about the architectural exile. The first chapter, “Memory of departure”, contains the academic background and performance during the pre-war time of the Spanish architects that would go into exile. An outline based on different generations and revealing an unambiguous perspective is introduced. The second chapter, “War and departure into exile”, tackles the performance of the Spanish architects during the war, as well as the following general diaspora into exile. The third chapter, “Building from what vanishes. Architects of the Spanish exile in Venezuela”, proposes various conceptual assumptions concerning the topic of displacement in architecture according to the doctrine and professional affiliations of the Spanish architects exiled in Venezuela. The fourth chapter, “The return”, deals with the end of these architects’ careers. As a general framework, their itineraries to return, or in many cases, the impossibility of returning, are reviewed. Finally, the sources to the various documents of files and repositories, as well as the bibliographical references consulted for the research, are provided. Three annexes have been attached to this research study. The first annex contains unpublished documents found during the research process; the second includes Bergamín’s drawings, basically from the first decades of the 20th century, such as, caricatures, advertisements and assignments done when he was a university student; and the third annex presents a biographical outline of the architects of the Spanish exile.
Resumo:
Clasificación de tipos de régimenes naturales de caudales a partir de parámetros de tres componentes del régimen fluvial: magnitud, frecuencia y duración.
Resumo:
Regionalización de tipos de régimen natural de caudales en la cuenca del Ebro y validación biológica de los tipos de regímen natural.
Resumo:
Integrated master-oscillator power amplifiers driven under steady-state injection conditions are known to show a complex dynamics resulting in a variety of emission regimes. We present experimental results on the emission characteristics of a 1.5 µm distributed feedback tapered master-oscillator power-amplifier in a wide range of steady-state injection conditions, showing different dynamic behaviors. The study combines the optical and radio-frequency spectra recorded under different levels of injected current into the master oscillator and the power amplifier sections. Under low injection current of the master oscillator the correlation between the optical and radio-frequency spectral maps allows to identify operation regimes in which the device emission arises from either the master oscillator mode or from the compound cavity modes allowed by the residual reflectance of the amplifier front facet. The quasi-periodic occurrence of these emission regimes as a function of the amplifier current is interpreted in terms of a thermally tuned competition between the modes of the master oscillator and the compound cavity modes. Under high injection current of the masteroscillator, two different regimes alternate quasi-periodically as a function of the injected current in the power amplifier: a stable regime with a single mode emission at the master oscillator frequency, and an unstable and complex self-pulsating regime showing strong peaks in the radio-frequency spectra as well as multiple frequencies in the optical spectra.
Resumo:
In this work, a combination of numerical methods applied to thermohydrodynamic lubrication problems with cavitation is presented. It should be emphasized the difficulty of the nonlinear mathematical coupled model involving a free boundary problem, but also the simplicity of the algorithms employed to solve it. So, finite element discretizations for the hydrodynamic and thermal equations combined with upwind techniques for the convection terms and duality methods for nonlinear features are proposed. Additionally, a model describing the movement of the shaft is provided. Considering the shaft as a rigid body this model will consist of an ODE system relating acceleration of the center of gravity and external and pressure loads. The numerical experiments of mechanical stability try to clarify the position of the neutral stability curve. Finally, a rotating machine for ship propulsion involving both axial and radial bearings operating with nonconventional lubricants (seawater to avoid environmental pollution) is analyzed by using laminar and turbulent inertial flows.
Resumo:
We present and analyze experimental results on the emission characteristics of a 1.5 ?m distributed feedback tapered master-oscillator power-amplifier in a wide range of steady-state injection conditions, showing different emission regimes under cw operation: stable single frequency emission, multi-frequency Fabry-Perot-like emission, and self-pulsation operation.
Resumo:
El modelo económico actual basado en el consumo y en la búsqueda permanente de una mayor calidad de vida, unido a una población mundial en aumento, contribuye a incrementar la demanda de servicios energéticos para cubrir las necesidades de energía de las personas y las industrias. Desde finales del siglo XIX la energía se ha generado fundamentalmente a partir de combustibles fósiles (carbón, petróleo y gas), convertidos en el suministro energético predominante mundialmente. Las emisiones de gases de efecto invernadero que genera la prestación de servicios energéticos han contribuido considerablemente al aumento histórico de las concentraciones de esos gases en la atmósfera, hasta el punto de que el consumo de combustibles fósiles es responsable de la mayoría de las emisiones antropogénicas (IPCC, 2012). Existen diversas opciones para disminuir las emisiones de gases de efecto invernadero del sector energético y con ello contribuir a mitigar el cambio climático, entre otras sería viable aumentar la eficiencia energética y sustituir combustibles de origen fósil por combustibles de origen renovable, pudiendo garantizar un suministro de energía sostenible, competitivo y seguro. De todas las energías renovables susceptibles de formar parte de una cartera de opciones de mitigación, esta tesis se centra en la bioenergía generada a partir de la valorización energética de las biomasas agrícolas, forestales, ganaderas o de otro tipo, con fines eléctricos y térmicos. Con objeto de mostrar su capacidad para contribuir a mitigar el cambio climático y su potencial contribución al desarrollo socioeconómico, a la generación de energía distribuida y a reducir determinados efectos negativos sobre el medio ambiente, se ha analizado minuciosamente el sector español de la biomasa en su conjunto. Desde el recurso biomásico que existe en España, las formas de extraerlo y procesarlo, las tecnologías de valorización energética, sus usos energéticos principales y la capacidad de implementación del sector en España. Asimismo se ha examinado el contexto energético tanto internacional y europeo como nacional, y se han analizado pormenorizadamente los instrumentos de soporte que han contribuido de manera directa e indirecta al desarrollo del sector en España. Además, la tesis integra el análisis de los resultados obtenidos mediante dos metodologías diferentes con fines también distintos. Por un lado se han obtenido los resultados medioambientales y socioeconómicos de los análisis de ciclo de vida input-output generados a partir de las cinco tecnologías biomásicas más ampliamente utilizadas en España. Y por otro lado, en base a los objetivos energéticos y medioambientales establecidos, se han obtenido distintas proyecciones de la implementación del sector a medio plazo, en forma de escenarios energéticos con horizonte 2035, mediante el modelo TIMES-Spain. La tesis ofrece también una serie de conclusiones y recomendaciones que podrían resultar pertinentes para los agentes que constituyen la cadena de valor del propio sector e interesados, así como para la formulación de políticas y mecanismos de apoyo para los agentes decisores, tanto del ámbito de la Administración General del Estado como autonómico y regional, sobre las características y ventajas de determinadas formas de valorización, sobre los efectos sociales y medioambientales que induce su uso, y sobre la capacidad de sector para contribuir a determinadas políticas más allá de las puramente energéticas. En todo caso, esta tesis doctoral aspira a contribuir a la toma de decisiones idóneas tanto a los agentes del sector como a responsables públicos, con objeto de adoptar medidas orientadas a fomentar modificaciones del sistema energético que incrementen la proporción de energía renovable y, de esta forma, contribuir a mitigar la amenaza que supone el cambio climático no solo en la actualidad, sino especialmente en los próximos años para las generaciones venideras. ABSTRACT The current economic model based on both, consumption and the constant search for greater quality of life, coupled with a growing world population, contribute to increase the demand for energy services in order to meet the energy needs of people and industries. Since the late nineteenth century, energy has been basically generated from fossil fuels (coal, oil and gas), which converted fossil fuels into the predominant World energy supply source. Emissions of greenhouse gases generated by the provision of energy services have contributed significantly to the historical increase in the concentrations of these gases in the atmosphere, to the extent that the consumption of fossil fuels is responsible for most of the anthropogenic emissions (IPCC, 2012). There are several options to reduce emissions of greenhouse gases in the energy sector and, thereby, to contribute to mitigate climate change. Among others, would be feasible to increase energy efficiency and progressively replacing fossil fuels by renewable fuels, which are able to ensure a sustainable, competitive and secure energy supply. Of all the renewable energies likely to form part of a portfolio of mitigation options, this thesis focuses on bioenergy generated from agricultural, forestry, farming or other kind of biomass, with electrical and thermal purposes. In order to show their ability to contribute to mitigate climate change and its potential contribution to socio-economic development, distributed energy generation and to reduce certain negative effects on the environment, the Spanish biomass sector as a whole has been dissected. From the types of biomass resources that exist in Spain, ways of extracting and processing them, energy production technologies, its main energy uses and the implementation capacity of the sector in Spain. It has also examined the international, European and national energy context, and has thoroughly analyzed the support instruments that have contributed directly and indirectly to the development of the sector in Spain, so far. Furthermore, the thesis integrates the analysis of results obtained using two different methodologies also with different purposes. On the one hand, the environmental and socio-economic results of the analysis of input-output cycle life generated from the five biomass technologies most widely used in Spain, have been obtained. On the other hand, different projections of the implementation of the sector in the medium term, as energy scenarios with horizon 2035, have been obtained by the model TIMES-Spain, based on several energy and environmental objectives. The thesis also offers a series of conclusions and recommendations that could be relevant to the agents that constitute the value chain of the biomass sector itself and other stakeholders. As well as policy and support mechanisms for decision-makers, from both: The Central and Regional Governments, on the characteristics and advantages of certain forms of valorization, on the social and environmental effects that induce their use, and the ability of the biomass sector to contribute to certain policies beyond the purely energy ones. In any case, this thesis aims to contribute to decision making, suitable for both: Industry players and to public officials. In order to adopt measures to promote significant changes in the energy system that increase the proportion of renewable energy and, consequently, that contribute to mitigate the threat of climate change; not only today but in the coming years, especially for future generations.