Assessment of CTF boiling transition and critical heat flux modeling capabilities using the OECD/NRC BFBT and PSBT benchmark databases

The need to refine models for best-estimate calculations, based on good-quality experimental data, has been expressed in many recent meetings in the field of nuclear applications. The modeling needs arising in this respect should not be limited to the currently available macroscopic methods but should be extended to next-generation analysis techniques that focus on more microscopic processes. One of the most valuable databases identified for the thermalhydraulics modeling was developed by the Nuclear Power Engineering Corporation (NUPEC), Japan. From 1987 to 1995, NUPEC performed steady-state and transient critical power and departure from nucleate boiling (DNB) test series based on the equivalent full-size mock-ups. Considering the reliability not only of the measured data, but also other relevant parameters such as the system pressure, inlet sub-cooling and rod surface temperature, these test series supplied the first substantial database for the development of truly mechanistic and consistent models for boiling transition and critical heat flux. Over the last few years the Pennsylvania State University (PSU) under the sponsorship of the U.S. Nuclear Regulatory Commission (NRC) has prepared, organized, conducted and summarized the OECD/NRC Full-size Fine-mesh Bundle Tests (BFBT) Benchmark. The international benchmark activities have been conducted in cooperation with the Nuclear Energy Agency/Organization for Economic Co-operation and Development (NEA/OECD) and Japan Nuclear Energy Safety (JNES) organization, Japan. Consequently, the JNES has made available the Boiling Water Reactor (BWR) NUPEC database for the purposes of the benchmark. Based on the success of the OECD/NRC BFBT benchmark the JNES has decided to release also the data based on the NUPEC Pressurized Water Reactor (PWR) subchannel and bundle tests for another follow-up international benchmark entitled OECD/NRC PWR Subchannel and Bundle Tests (PSBT) benchmark. This paper presents an application of the joint Penn State University/Technical University of Madrid (UPM) version of the well-known subchannel code COBRA-TF, namely CTF, to the critical power and departure from nucleate boiling (DNB) exercises of the OECD/NRC BFBT and PSBT benchmarks

Automatic segmentation of relevant textures in agricultural images

One important issue emerging strongly in agriculture is related with the automatization of tasks, where the optical sensors play an important role. They provide images that must be conveniently processed. The most relevantimage processing procedures require the identification of green plants, in our experiments they come from barley and corn crops including weeds, so that some types of action can be carried out, including site-specific treatments with chemical products or mechanical manipulations. Also the identification of textures belonging to the soil could be useful to know some variables, such as humidity, smoothness or any others. Finally, from the point of view of the autonomous robot navigation, where the robot is equipped with the imaging system, some times it is convenient to know not only the soil information and the plants growing in the soil but also additional information supplied by global references based on specific areas. This implies that the images to be processed contain textures of three main types to be identified: green plants, soil and sky if any. This paper proposes a new automatic approach for segmenting these main textures and also to refine the identification of sub-textures inside the main ones. Concerning the green identification, we propose a new approach that exploits the performance of existing strategies by combining them. The combination takes into account the relevance of the information provided by each strategy based on the intensity variability. This makes an important contribution. The combination of thresholding approaches, for segmenting the soil and the sky, makes the second contribution; finally the adjusting of the supervised fuzzy clustering approach for identifying sub-textures automatically, makes the third finding. The performance of the method allows to verify its viability for automatic tasks in agriculture based on image processing

PDR with a foot-mounted IMU and ramp detection

The localization of persons in indoor environments is nowadays an open problem. There are partial solutions based on the deployment of a network of sensors (Local Positioning Systems or LPS). Other solutions only require the installation of an inertial sensor on the person’s body (Pedestrian Dead-Reckoning or PDR). PDR solutions integrate the signals coming from an Inertial Measurement Unit (IMU), which usually contains 3 accelerometers and 3 gyroscopes. The main problem of PDR is the accumulation of positioning errors due to the drift caused by the noise in the sensors. This paper presents a PDR solution that incorporates a drift correction method based on detecting the access ramps usually found in buildings. The ramp correction method is implemented over a PDR framework that uses an Inertial Navigation algorithm (INS) and an IMU attached to the person’s foot. Unlike other approaches that use external sensors to correct the drift error, we only use one IMU on the foot. To detect a ramp, the slope of the terrain on which the user is walking, and the change in height sensed when moving forward, are estimated from the IMU. After detection, the ramp is checked for association with one of the existing in a database. For each associated ramp, a position correction is fed into the Kalman Filter in order to refine the INS-PDR solution. Drift-free localization is achieved with positioning errors below 2 meters for 1,000-meter-long routes in a building with a few ramps.

Coronary Artery Tracking in 3D Cardiac CT Images Using Local Morphological Reconstruction Operators

Automatic segmentation and tracking of the coronary artery tree from Cardiac Multislice-CT images is an important goal to improve the diagnosis and treatment of coronary artery disease. This paper presents a semi-automatic algorithm (one input point per vessel) based on morphological grayscale local reconstructions in 3D images devoted to the extraction of the coronary artery tree. The algorithm has been evaluated in the framework of the Coronary Artery Tracking Challenge 2008 [1], obtaining consistent results in overlapping measurements (a mean of 70% of the vessel well tracked). Poor results in accuracy measurements suggest that future work should refine the centerline extraction. The algorithm can be efficiently implemented and its general strategy can be easily extrapolated to a completely automated centerline extraction or to a user interactive vessel extraction

Analysis of concurrent constraint logic programs with a fixed scheduling rule

The analysis of concurrent constraint programs is a challenge due to the inherently concurrent behaviour of its computational model. However, most implementations of the concurrent paradigm can be viewed as a computation with a fixed scheduling rule which suspends some goals so that their execution is postponed until some condition awakens them. For a certain kind of properties, an analysis defined in these terms is correct. Furthermore, it is much more tractable, and in addition can make use of existing analysis technology for the underlying fixed computation rule. We show how this can be done when the starting point is a framework for the analysis of sequential programs. The resulting analysis, which incorporates suspensions, is adequate for concurrent models where concurrency is localized, e.g. the Andorra model. We refine the analysis for this particular case. Another model in which concurrency is preferably encapsulated, and thus suspensions are local to parts of the computation, is that of CIAO. Nonetheless, the analysis scheme can be generalized to models with global concurrency. We also sketch how this could be done, and we show how the resulting analysis framework could be used for analyzing typical properties, such as suspensión freeness.

Precise set sharin analysis for java-style programs (and proofs).

Finding useful sharing information between instances in object- oriented programs has recently been the focus of much research. The applications of such static analysis are multiple: by knowing which variables definitely do not share in memory we can apply conventional compiler optimizations, find coarse-grained parallelism opportunities, or, more importantly, verify certain correctness aspects of programs even in the absence of annotations. In this paper we introduce a framework for deriving precise sharing information based on abstract interpretation for a Java-like language. Our analysis achieves precision in various ways, including supporting multivariance, which allows separating different contexts. We propose a combined Set Sharing + Nullity + Classes domain which captures which instances do not share and which ones are definitively null, and which uses the classes to refine the static information when inheritance is present. The use of a set sharing abstraction allows a more precise representation of the existing sharings and is crucial in achieving precision during interprocedural analysis. Carrying the domains in a combined way facilitates the interaction among them in the presence of multivariance in the analysis. We show through examples and experimentally that both the set sharing part of the domain as well as the combined domain provide more accurate information than previous work based on pair sharing domains, at reasonable cost.

Precise set sharing and nullity analysis for java-style program

Finding useful sharing information between instances in object- oriented programs has been recently the focus of much research. The applications of such static analysis are multiple: by knowing which variables share in memory we can apply conventional compiler optimizations, find coarse-grained parallelism opportunities, or, more importantly,erify certain correctness aspects of programs even in the absence of annotations In this paper we introduce a framework for deriving precise sharing information based on abstract interpretation for a Java-like language. Our analysis achieves precision in various ways. The analysis is multivariant, which allows separating different contexts. We propose a combined Set Sharing + Nullity + Classes domain which captures which instances share and which ones do not or are definitively null, and which uses the classes to refine the static information when inheritance is present. Carrying the domains in a combined way facilitates the interaction among the domains in the presence of mutivariance in the analysis. We show that both the set sharing part of the domain as well as the combined domain provide more accurate information than previous work based on pair sharing domains, at reasonable cost.

La dimensión de la subjetividad en la formación del valor inmobiliario : aplicación del método de análisis de ecuaciones estructurales al mercado residencial de Lisboa

The discretionality and the appraisers’ subjectivity that characterize traditional real estate valuation are still allowed to take part in the formation of the asset price even when respecting international standards (EVS, IVS) or Appraisal Institution´s regulations (TEGOVA, RICS, etc.). The application of econometric and statistical methods to real estate valuation aims at the elimination of subjectivity on the appraisal process. But the unanswered question underneath this subject is the following: How important is the subjective component on real estate appraisal value formation? On this study Structural Equation Models (SEM) are used to determine the importance of the objective and subjective components on real estate valuation value formation as well as the weight of economic factors and the current economic context on real estate appraisal for mortgage purposes price formation. There were used two latent variables, Objective Component and Subjective Component, witch aggregate objective observed variables and subjective observed and unobserved variables, respectively. Factorial Exploratory Analysis is the statistical technique used in order to link the observed variables extracted from the valuation appraisal reports to the latent constructs derived from the theoretical model. SEM models were used to refine the model, eliminate non‐significant variables and to determine the weight of Objective and Subjective latent variables. These techniques were applied to a sample of over 11.000 real estate assets appraisal reports throughout the time period between November of 2006 and April of 2012. The real assets used on this study are located on Lisbon’s Metropolitan Area – “Grande Lisboa” –, Portugal. From this study, we conclude that Subjective Component has a considerable weight on real estate appraisal value formation and that the external factor Economic Situation has a very small impact on real estate appraisal value formation.

Indicators and Estimators in P-Adaptive Boundary Elements

The paper presents the possibility of implementing a p-adaptive process with the B.E.M. Although the exemples show that good results can be obtained with a limited amount of storage and with the simple ideas explained above, more research is needed in order to improve the two main problems of the method, i.e.: the criteria of where to refine and until what degree. Mathematically based reasoning is still lacking and will be useful to simplify the decission making. Nevertheless the method seems promising and, we hope, opens a path for a series of research lines of maximum interest. Although the paper has dealt only with plane potential problem the extension to plane elasticity as well as to 3-D potential problem is straight-forward.

Refined facial disparity maps for automatic creation of 3D avatars

We propose a new method to automatically refine a facial disparity map obtained with standard cameras and under conventional illumination conditions by using a smart combination of traditional computer vision and 3D graphics techniques. Our system inputs two stereo images acquired with standard (calibrated) cameras and uses dense disparity estimation strategies to obtain a coarse initial disparity map, and SIFT to detect and match several feature points in the subjects face. We then use these points as anchors to modify the disparity in the facial area by building a Delaunay triangulation of their convex hull and interpolating their disparity values inside each triangle. We thus obtain a refined disparity map providing a much more accurate representation of the the subjects facial features. This refined facial disparity map may be easily transformed, through the camera calibration parameters, into a depth map to be used, also automatically, to improve the facial mesh of a 3D avatar to match the subjects real human features.

Bases para un diseño metodológico de estimulación binaural como terapia acústica en neurología

La medicina y la ingeniería del siglo XXI han dado como fruto numerosos avances para la sociedad aunque en la mayoría de los casos los tratamientos suelen ser costosos e invasivos. La educación que recibe la sociedad sobre la salud es escasa, ya que sólo vamos al médico cuando realmente estamos enfermos. Este trabajo presenta nuestra apuesta por las terapias complementarias, para el desarrollo de una metodología terapéutica no invasiva y con un costo muy bajo. La finalidad de esta Tesis, que se enmarca en un equipo multidisciplinar, fruto de la estrecha colaboración en el que participan psicopedagogos, ingenieros y médicos, es perfilar una metodología que luego pueda ser aplicable a patologías neurológicas. Aquí, dejamos sentadas las bases. Faltarán nuevos investigadores que continúen este camino para tener una base de datos lo suficientemente extensa de registros de sujetos que hayan sido sometidos a terapia binaural, para poder sacar unas conclusiones sólidas. La aportación de esta Tesis deja cubierta la aplicación, selección, procesado de señal y desarrollo de algoritmos, test cognitivos indicados para el caso específico que nos ocupa, cálculo de incertidumbre del sistema utilizado para la aplicación del estímulo y desarrollo de un test psicoacústico específico. EL empleo del sonido en medicina como es la musicoterapia o sonoterapia ha experimentado una gran difusión en los últimos años, más de 100.000 nuevas citas bibliográficas han aparecido con respecto al año anterior. Sin embargo, son escasísimas las que hacen referencia a las características físico acústicas del sonido empleado, tan sólo hemos encontrado una par de ellas que correlacionan las características físicas del sonido con el tipo de respuesta terapéutica. No encontramos citas bibliográficas específicas que planteen un modelo experimental científico capaz de reproducir las mismas respuestas ante los mismos parámetros y estímulos. En esta Tesis proponemos el uso de estimulación sonora binaural, que consiste en la utilización de dos tonos puros idénticos pero ligeramente diferentes en frecuencia que se presentan de manera separada cada uno en un oído, como consecuencia, la persona que recibe la estimulación percibe un tercer tono, llamado tono binaural, formado por la diferencia de frecuencia de ambos variando su amplitud. Existen estudios que sugieren que dichas frecuencias binaurales pueden modificar los patrones eléctricos de la actividad cerebral y los niveles de arousal, conociéndose en la literatura bajo el nombre de “entrainment”. Tras la revisión bibliográfica del estado del arte, podemos concluir que es necesario el desarrollo de estudios doble ciego bien diseñados, con el objetivo de establecer una base sólida sobre los efectos de este tipo de estimulación, ya que la mayoría de los beneficios documentados se refieren a muestras muy pequeñas y con poco rigor científico, siendo los resultados positivos obtenidos debidos al efecto placebo. La tecnología binaural es barata siendo cualquier avance en esta dirección de interés público. El objetivo concreto de la investigación es estudiar el potencial de las ondas binaurales en un área en particular: tareas que requieren atención y concentración. Se busca obtener cualquier cambio en las ondas cerebrales que se puedan correlar con la mejoras. A la vista de los resultados de estas investigaciones se intentará aplicar esta metodología en neuropatologías que presenten alguna deficiencia en el área de atención como es el Trastorno de espectro Autista. En esta Tesis presentamos los resultados de dos estudios independientes, el primero para sentar las bases del método (tiempos, diseño de estimulaciones, procesado) en una muestra de 78 adultos sanos, el segundo a partir de los resultados obtenidos en el primero, afinando la metodología y para un grupo de 20 niños entre 8 y 12 años, los resultados del segundo estudio sirven para justificar su aplicación en niños con TEA que presenten déficit de atención. ABSTRACT Medicine and engineering in the 21st century have resulted in advances for society but in most cases the treatments are often costly and invasive. The health education society receive is scarce, since only go to the doctor when we are really sick. With this work I present my commitment to complementary therapies, my little grain of sand in the development of a noninvasive therapeutic approach and very low cost, well and can be used in a preventive manner resulting in a society with less sick. The purpose of this thesis is to outline a methodology that can then be applied to neurological diseases, here we lay the groundwork. New researchers are needed to continue this path for a sufficiently extensive records database of subjects who have undergone binaural therapy, and so to draw firm conclusions. The contribution of this thesis includes: the application, selection, signal processing and algorithm development, indicated cognitive tests for the specific case at hand, calculation of system uncertainty of the system and development of a specific psychoacoustic test. The use of sound in medicine, such as music therapy or sound therapy has experienced a great diffusion in recent years, more than 100,000 new citations have appeared over the previous year but very few are those referring to acoustic physical characteristics of sound employee, we have only found a couple of them that physical sound characteristics are correlated with the therapeutic response. We found no specific citations posing a scientific experimental model capable of reproducing the same answers to the same parameters and stimuli. In this thesis we propose the use of binaural sound stimulation which involves the use of two identical but slightly different in frequency pure tones presented separately each in one ear, as a result the subject perceives a third tone, called binaural tone, formed by the difference in frequency with amplitude variations Studies suggest that these binaural frequencies can modify the electrical patterns of brain activity and arousal levels, being known in the literature under the name of “entrainment”. After the literature review of the state of the art, we conclude, it is necessary to develop well-designed double-blind studies, in order to establish a solid foundation on the effects of such stimulation, since most of the documented benefits relate to very small samples and unscientific may be obtained positive results due to the placebo effect. The binaural technology is cheap being any progress in this direction in the public interest. The specific objective of the research is to study the potential of binaural waves in a particular area: tasks requiring attention and concentration also we want to get any change in brain waves that can correlate with improvements. In view of the results of this research we seek to apply this methodology in neuropathology presenting any deficiency in the area of attention such as Autism Spectrum Disorder. In this thesis we present the results of two independent studies, the first to lay the foundation of the method (times, stimulation design, processing) in a sample of 78 healthy adults, the second from the results obtained in the first, refine the methodology for a group of 20 children between 8 and 12 years, the results of the second study used to justify its use in children with ASD that present attention deficit.

Optimizing the creation of base populations for aquaculture breeding programs using phenotypic and genomic data and its consequences on genetic progress

The success of an aquaculture breeding program critically depends on the way in which the base population of breeders is constructed since all the genetic variability for the traits included originally in the breeding goal as well as those to be included in the future is contained in the initial founders. Traditionally, base populations were created from a number of wild strains by sampling equal numbers from each strain. However, for some aquaculture species improved strains are already available and, therefore, mean phenotypic values for economically important traits can be used as a criterion to optimize the sampling when creating base populations. Also, the increasing availability of genome-wide genotype information in aquaculture species could help to refine the estimation of relationships within and between candidate strains and, thus, to optimize the percentage of individuals to be sampled from each strain. This study explores the advantages of using phenotypic and genome-wide information when constructing base populations for aquaculture breeding programs in terms of initial and subsequent trait performance and genetic diversity level. Results show that a compromise solution between diversity and performance can be found when creating base populations. Up to 6% higher levels of phenotypic performance can be achieved at the same level of global diversity in the base population by optimizing the selection of breeders instead of sampling equal numbers from each strain. The higher performance observed in the base population persisted during 10 generations of phenotypic selection applied in the subsequent breeding program.

Flooding through the lens of mobile phone activity

Natural disasters affect hundreds of millions of people worldwide every year. Emergency response efforts depend upon the availability of timely information, such as information concerning the movements of affected populations. The analysis of aggregated and anonymized Call Detail Records (CDR) captured from the mobile phone infrastructure provides new possibilities to characterize human behavior during critical events. In this work, we investigate the viability of using CDR data combined with other sources of information to characterize the floods that occurred in Tabasco, Mexico in 2009. An impact map has been reconstructed using Landsat-7 images to identify the floods. Within this frame, the underlying communication activity signals in the CDR data have been analyzed and compared against rainfall levels extracted from data of the NASA-TRMM project. The variations in the number of active phones connected to each cell tower reveal abnormal activity patterns in the most affected locations during and after the floods that could be used as signatures of the floods - both in terms of infrastructure impact assessment and population information awareness. The epresentativeness of the analysis has been assessed using census data and civil protection records. While a more extensive validation is required, these early results suggest high potential in using cell tower activity information to improve early warning and emergency management mechanisms.

Optimización de aperturas mediante técnicas de algoritmos evolutivos

Los sistemas de imagen por ultrasonidos son hoy una herramienta indispensable en aplicaciones de diagnóstico en medicina y son cada vez más utilizados en aplicaciones industriales en el área de ensayos no destructivos. El array es el elemento primario de estos sistemas y su diseño determina las características de los haces que se pueden construir (forma y tamaño del lóbulo principal, de los lóbulos secundarios y de rejilla, etc.), condicionando la calidad de las imágenes que pueden conseguirse. En arrays regulares la distancia máxima entre elementos se establece en media longitud de onda para evitar la formación de artefactos. Al mismo tiempo, la resolución en la imagen de los objetos presentes en la escena aumenta con el tamaño total de la apertura, por lo que una pequeña mejora en la calidad de la imagen se traduce en un aumento significativo del número de elementos del transductor. Esto tiene, entre otras, las siguientes consecuencias: Problemas de fabricación de los arrays por la gran densidad de conexiones (téngase en cuenta que en aplicaciones típicas de imagen médica, el valor de la longitud de onda es de décimas de milímetro) Baja relación señal/ruido y, en consecuencia, bajo rango dinámico de las señales por el reducido tamaño de los elementos. Complejidad de los equipos que deben manejar un elevado número de canales independientes. Por ejemplo, se necesitarían 10.000 elementos separados λ 2 para una apertura cuadrada de 50 λ. Una forma sencilla para resolver estos problemas existen alternativas que reducen el número de elementos activos de un array pleno, sacrificando hasta cierto punto la calidad de imagen, la energía emitida, el rango dinámico, el contraste, etc. Nosotros planteamos una estrategia diferente, y es desarrollar una metodología de optimización capaz de hallar de forma sistemática configuraciones de arrays de ultrasonido adaptados a aplicaciones específicas. Para realizar dicha labor proponemos el uso de los algoritmos evolutivos para buscar y seleccionar en el espacio de configuraciones de arrays aquellas que mejor se adaptan a los requisitos fijados por cada aplicación. En la memoria se trata el problema de la codificación de las configuraciones de arrays para que puedan ser utilizados como individuos de la población sobre la que van a actuar los algoritmos evolutivos. También se aborda la definición de funciones de idoneidad que permitan realizar comparaciones entre dichas configuraciones de acuerdo con los requisitos y restricciones de cada problema de diseño. Finalmente, se propone emplear el algoritmo multiobjetivo NSGA II como herramienta primaria de optimización y, a continuación, utilizar algoritmos mono-objetivo tipo Simulated Annealing para seleccionar y retinar las soluciones proporcionadas por el NSGA II. Muchas de las funciones de idoneidad que definen las características deseadas del array a diseñar se calculan partir de uno o más patrones de radiación generados por cada solución candidata. La obtención de estos patrones con los métodos habituales de simulación de campo acústico en banda ancha requiere tiempos de cálculo muy grandes que pueden hacer inviable el proceso de optimización con algoritmos evolutivos en la práctica. Como solución, se propone un método de cálculo en banda estrecha que reduce en, al menos, un orden de magnitud el tiempo de cálculo necesario Finalmente se presentan una serie de ejemplos, con arrays lineales y bidimensionales, para validar la metodología de diseño propuesta comparando experimentalmente las características reales de los diseños construidos con las predicciones del método de optimización. ABSTRACT Currently, the ultrasound imaging system is one of the powerful tools in medical diagnostic and non-destructive testing for industrial applications. Ultrasonic arrays design determines the beam characteristics (main and secondary lobes, beam pattern, etc...) which assist to enhance the image resolution. The maximum distance between the elements of the array should be the half of the wavelength to avoid the formation of grating lobes. At the same time, the image resolution of the target in the region of interest increases with the aperture size. Consequently, the larger number of elements in arrays assures the better image quality but this improvement contains the following drawbacks: Difficulties in the arrays manufacturing due to the large connection density. Low noise to signal ratio. Complexity of the ultrasonic system to handle large number of channels. The easiest way to resolve these issues is to reduce the number of active elements in full arrays, but on the other hand the image quality, dynamic range, contrast, etc, are compromised by this solutions In this thesis, an optimization methodology able to find ultrasound array configurations adapted for specific applications is presented. The evolutionary algorithms are used to obtain the ideal arrays among the existing configurations. This work addressed problems such as: the codification of ultrasound arrays to be interpreted as individuals in the evolutionary algorithm population and the fitness function and constraints, which will assess the behaviour of individuals. Therefore, it is proposed to use the multi-objective algorithm NSGA-II as a primary optimization tool, and then use the mono-objective Simulated Annealing algorithm to select and refine the solutions provided by the NSGA I I . The acoustic field is calculated many times for each individual and in every generation for every fitness functions. An acoustic narrow band field simulator, where the number of operations is reduced, this ensures a quick calculation of the acoustic field to reduce the expensive computing time required by these functions we have employed. Finally a set of examples are presented in order to validate our proposed design methodology, using linear and bidimensional arrays where the actual characteristics of the design are compared with the predictions of the optimization methodology.

Modelado experimental de un sistema de e-Salud aplicado en cooperación al desarrollo

Los Objetivos de Desarrollo del Milenio comprometieron a los países con una nueva alianza mundial de alcanzar gradualmente una cobertura universal de los niveles mínimos de bienestar en los países en desarrollo (reducir la pobreza y el hambre y dar respuesta a problemas como la mala salud, las desigualdades de género, la falta de educación, el acceso a agua salubre y la degradación ambiental). Para dar continuidad a esta iniciativa, recientemente en septiembre de 2015, la ONU promulgó la declaración de los Objetivos de Desarrollo Sostenible. Los ODM sitúan la salud en el corazón del desarrollo y establecen un novedoso pacto mundial que vincula a los países desarrollados y los países en desarrollo por medio de obligaciones claras y recíprocas. En este sentido, diversos organismos de cooperación a través de sus programas de cooperación internacional, tratan de mejorar el acceso a la asistencia sanitaria, especialmente a la población vulnerable que vive en zonas rurales de países en desarrollo. Con el fin de ayudar a cumplir los ODM que apoyan los temas de salud en dicha población, estos organismos desarrollan proyectos que despliegan sistemas de e-salud. Las intervenciones se enfrentan a múltiples retos: condicionantes de los países en desarrollo, las necesidades y demandas de los sistemas sanitarios y la complejidad de implantar las TIC en entornos complejos y altamente dinámicos como son los países en desarrollo. Estos condicionantes ocasionan la mayoría de proyectos fallidos que terminan convirtiéndose en soluciones aisladas, que anteponen la tecnología a las necesidades de la población y no generan el impacto esperado en su desarrollo. En este contexto tuvo origen esta tesis doctoral, que persigue como objetivo analizar, planificar, diseñar, verificar y validar un marco arquitectónico de implantación de sistemas de e-salud en áreas rurales de países en desarrollo, que promueva el mejoramiento de la calidad de vida de la población vulnerable de estas regiones y la efectividad de las intervenciones de e-salud en el marco de proyectos de cooperación al desarrollo. Para lograrlo, tomé como punto de partida, diversas estrategias, modelos, metodologías de implantación de e-salud, modelos de gestión de proyectos propuestos por distintos organismos internacionales y propuse una instanciación de estos modelos a proyectos de implantación de sistemas de e-salud en países en desarrollo. Apliqué la metodología action research y los enfoques twin track, middle out y design thinking que me permitieron el refinamiento iterativo del modelo propuesto en la tesis doctoral mediante el trabajo de campo realizado en dos zonas rurales de países de Centroamérica: Jocotán (Guatemala) y San José de Cusmapa (Nicaragua). Como resultado obtuve un modelo experimental basado en cuatro componentes: un modelo de referencia tipo, un modelo conceptual de e-salud, los procesos de gestión y de implantación de sistemas de e-salud en países en desarrollo y una arquitectura de referencia. El modelo experimental resultante aporta herramientas importantes para el despliegue de sistemas de e-salud en países en desarrollo. Se ha propuesto un modelo de referencia que proporciona una visión holística del contexto del país en desarrollo donde se desarrollarán las intervenciones. Un modelo conceptual de e-salud que representa los principales conceptos involucrados en un sistema de e-salud. Los procesos ii- de gestión del proyecto y de implantación del sistema que proporcionan a los grupos de cooperación, herramientas para el análisis, diseño, desarrollo y despliegue de los sistemas de e-salud en áreas rurales de países en desarrollo. Y finalmente la arquitectura de referencia que sienta las bases para la aplicación de estos procesos a un contexto en particular. Las líneas futuras de trabajo sugieren extender el modelo a más casos de estudio que permitan su refinamiento y evaluar los futuros usos que pueden surgir de los sistemas de e-salud resultantes. ABSTRACT Millennium Development Goals (MDGs) committing the countries with a new global partnership to achieve universal coverage of minimum levels of well-being in Developing Countries (for addressing extreme poverty in its many dimensions-income poverty, hunger, disease, lack of adequate housing, and exclusion-while promoting gender equality, education, and environmental sustainability). From September 2015, these goals are replaces with Sustainable Development Goals (SDGs). The MDG place health at the heart of development and establish a novel global compact, linking developed and developing countries through clear, reciprocal obligations. Many public and private institutions promote international cooperation programs to support in achieving the MDGs. Some of these cooperation programs deal improving access to healthcare to poor people living in isolated areas from developing countries. In order to accomplish this goal organizations perform projects (interventions or cooperation projects) that deploy e-health systems in these zones. Nevertheless, this kind of projects face multiple challenges that dismiss the effectiveness of the projects results. In particular, cooperation teams face issues such as constraints in developing countries, lack of electrical and ICT infrastructure, scarce transport, extreme climate conditions, lack ICT capacity, lack of access to healthcare and inefficient delivery methods, etc. Hence, these issues increase the complexity of implementing e-health in developing countries and then causes the most projects fail. In other words, the solutions do not meet population needs and do not generate the expected impact on development. This context is the starting point of this doctoral thesis, which deals with analysing, planning, designing, testing and validating an architectural framework in order to implement e-health systems in rural areas from developing countries, promote development of the population in these regions, and thus improve the impact of interventions of development cooperation projects. To achieve this goal, I took as a starting point the strategies, models, e-health implementation methodologies and projects management models proposed by various international agencies. Then I proposed an instantiation of these models to manage the intervention and implement e-health systems in developing countries. I applied the action research methodology and the approaches twin track, middle out and design thinking which allowed me the iterative refinement of the model proposed in this doctoral thesis. The proposed framework was validated by running two cases studies in rural areas of Central America: Jocotán (Guatemala) and San José de Cusmapa (Nicaragua). As a result, I obtained an experimental model based on four components: a Type reference model, an e-health conceptual model, both process management and implementation e-health systems in developing countries and a reference architecture. The resulting experimental model provides important tools for the deployment of e-health systems in developing countries. The model become as reference model that provides a holistic view of the developing countries context where the interventions will be running. The conceptual model of e-health represents the main concepts involved into an e-health system. The project management and implementation processes of the iv- system provide to the cooperation teams with tools for analysing, designing, developing and deploying e-health systems in rural areas from developing countries. Finally, the reference architecture provides the basis for the implementation of these processes into a particular context. The future research suggest the extension the model to other cases studies in order to refine and evaluate the viability the model.