Air-steam gasification of sewage sludge in a bubbling bed reactor: Effect of alumina as a primary catalyst

Numerous references can be found in scientific literature regarding biomass gasification. However, there are few works related to sludge gasification. A study of sewage sludge gasification process in a bubbling fluidised bed gasifier on a laboratory scale is here reported. The aim was to find the optimum conditions for reducing the production of tars and gain more information on the influx of different operating variables in the products resulting from the gasification of this waste. The variables studied were the equivalence ratio (ER), the steam-biomass ratio (SB) and temperature. Specifically, the ER was varied from 0.2 to 0.4, the SB from 0 to 1 and the temperature from 750 °C (1023 K) to 850 °C (1123 K). Although it was observed that tar production could be considerably reduced (up to 72%) by optimising the gasification conditions, the effect of using alumina (aluminium oxide, of proven efficacy in destroying the tar produced in biomass gasification) as primary catalyst in air and air-steam mixture tests was also verified. The results show that by adding small quantities of alumina to the bed (10% by weight of fed sludge) considerable reductions in tar production can be obtained (up to 42%) improving, at the same time, the lower heating value (LHV) of the gas and carbon conversion.

Modelo del sistema de gestión de la calidad y el desempeño organizacional en la producción de petróleo

El proceso de cambio de una sociedad industrial a una sociedad del conocimiento, que experimenta el mundo globalizado en el siglo XXI, induce a las empresas y organizaciones a desarrollar ventajas competitivas y sostenibles basadas en sus activos intangibles, entre los cuales destacan los sistemas de gestión en general y los sistemas de gestión de la calidad (SGC) en particular. Las organizaciones dedicadas a la producción de petróleo están influenciadas por dicha tendencia. El petróleo es un recurso natural con reservas limitadas, cuya producción y consumo ha crecido progresivamente, aportando la mayor cuota (35 %) del total de la energía que se consume en el mundo contemporáneo, aporte que se mantendrá hasta el año 2035, según las previsiones más conservadoras. Por tanto, se hace necesario desarrollar modelos de producción innovadores, que contribuyan a la mejora del factor de recobro de los yacimientos y de la vida útil de los mismos, al tiempo que satisfagan los requerimientos de producción y consumo diarios de los exigentes mercados globales. El objeto de esta investigación es el desarrollo de un modelo de gestión de la calidad y su efecto en el desempeño organizacional, a través del efecto mediador de los constructos satisfacción del cliente interno y gestión del conocimiento en la producción de petróleo. Esta investigación de carácter explicativo, no experimental, transeccional y ex-postfacto, se realizó en la región petrolífera del lago de Maracaibo, al occidente de Venezuela, la cual tiene más de 70 años en producción y cuenta con yacimientos maduros. La población objeto de estudio fue de 369 trabajadores petroleros, quienes participaron en las mesas técnicas de la calidad, durante los meses de mayo y julio del año 2012, los cuales en su mayoría están en proceso de formación como analistas, asesores y auditores de los SGC. La técnica de muestreo aplicada fue de tipo aleatorio simple, con una muestra de 252 individuos. A la misma se le aplicó un cuestionario diseñado ad hoc, el cual fue validado por las técnicas de juicio de expertos y prueba piloto. El procedimiento de investigación se realizó a través de una secuencia, que incluyó la elaboración de un modelo teórico, basado en la revisión del estado del arte; un modelo factorial, sobre la base del análisis factorial de los datos de la encuesta; un modelo de regresión lineal, elaborado a través del método de regresión lineal simple y múltiple; un modelo de análisis de sendero, realizado con el software Amos 20 SPSS y finalmente, un modelo informático, realizado con el simulador Vensim PLE v.6.2. Los resultados obtenidos indican que el modelo teórico se transformó en un modelo empírico, en el cual, la variable independiente fue el SGC, la variable mediadora fue la integración de las dimensiones eliminación de la no conformidad, satisfacción del cliente interno y aprendizaje organizacional (ENCSCIAO) y la variable respuesta la integración de las dimensiones desempeño organizacional y aprendizaje organizacional (DOOA). Se verificó el efecto mediador del ENSCIAO sobre la relación SGC-DOOA con una bondad del ajuste, del 42,65%. En el modelo de regresión múltiple se encontró que las variables determinantes son eliminación de la no conformidad (ENC), conocimiento adquirido (CA) y conocimiento espontáneo (CE), lo cual fue corroborado con el modelo de análisis de sendero. El modelo informático se desarrolló empleando datos aproximados de una unidad de producción tipo, generándose cuatro escenarios; siendo el más favorable, aquel en el cual se aplicaba el SGC y variables relacionadas, reduciendo la desviación de la producción, incrementando el factor de recobro y ampliando la vida útil del yacimiento. Se concluye que la aplicación del SGC y constructos relacionados favorece el desempeño y la producción de las unidades de explotación de yacimientos petrolíferos maduros. Los principales aportes de la tesis son la obtención de un modelo de gestión de la producción de petróleo en yacimientos maduros, basado en los SGC. Asimismo, el desarrollo de un concepto de gestión de la calidad asociado a la reducción de la desviación de la producción petrolífera anual, al incremento del factor de recobro y al aumento de la vida útil del yacimiento. Las futuras líneas de investigación están orientadas a la aplicación del modelo en contextos reales y específicos, para medir su impacto y realizar los ajustes pertinentes. ABSTRACT The process of change from an industrial society to a knowledge-based society, which undergoes the globalized world in the twenty-first century, induces companies and organizations to develop a sustainable and competitive advantages based on its intangible assets, among which are noteworthy the management systems in general and particularly the quality management systems (QMS). Organizations engaged in oil production are influenced by said trend. Oil is a natural resource with limited reserves, where production and consumption has grown progressively, providing the largest share (35%) of the total energy consumed in the contemporary world, a contribution that will remain until the year 2035 according to the more conservative trust estimations. Therefore, it becomes necessary to develop innovative production models which contribute with the improvement of reservoirs´ recovery factor and the lifetime thereof, while meeting the production requirements and daily consumption of demanding global markets. The aim of this research is to develop a model of quality management and its effect on organizational performance through the mediator effect of the constructs, internal customer satisfaction and knowledge management in oil production. This research of explanatory nature, not experimental, transactional and expos-facto was carried out in the oil-region of Maracaibo Lake located to the west of Venezuela, which has more than 70 years in continuous production and has mature reservoirs. The population under study was 369 oil workers who participated in the technical quality workshops, during the months of May and July of 2012, the majority of which were in the process of training as analysts, consultants and auditors of the QMS. The sampling technique applied was simple random type. To a sample of 252 individuals of the population it was applied an ad hoc designed questionnaire, which was validated by the techniques of expert judgment and pilot test. The research procedure was performed through a sequence, which included the elaboration of a theoretical model, based on the review of the state of the art; a factorial model with based on factorial analysis of the survey data; a linear regression model, developed through the method of simple and multiple linear regression; a structural equation model, made with software °Amos 20 SPSS° and finally, a computer model, performed with the simulator Vensim PLE v.6.2. The results indicate that the theoretical model was transformed into an empirical model, in which the independent variable was the QMS, the mediator variable was the integration of the dimensions: elimination of non-conformity, internal customer satisfaction and organizational learning (ENCSCIAO) and the response variable the integration of the dimensions, organizational performance and learning organizational (DOOA). ENSCIAO´s mediator effect on the relation QMS-DOOA was verified with a goodness of fit of 42,65%. In the multiple regression model was found to be the determining variables are elimination of nonconformity (ENC), knowledge acquired (CA) and spontaneous knowledge (EC), which was verified with the structural equation model. The computer model was developed based on approximate data of an oil production unit type, creating four (04) scenarios; being the most favorable, that one which it was applied the QMS and related variables, reducing the production deviation, increasing the recovery factor and extending the lifetime of the reservoir. It is concluded that QMS implementation powered with the related constructs, favors performance and production of mature oilfield of exploitation reservoirs units. The main contributions of this thesis are obtaining a management model for oil production in mature oilfields, based on QMS. In addition, development of a concept of quality associated to reduce the annual oil production deviation, increase the recovery factor and increase oilfield lifetime. Future lines of research are oriented to the implementation of this model in real and specific contexts to measure its impact and make the necessary adjustments that might take place.

Evaluación de tecnologías de manejo de arvenses en el cultivo de la caña de azúcar (Saccharum spp. híbrido)

En Cuba, las arvenses que afectan al cultivo de la caña de azúcar son una de las causas fundamentales de los bajos rendimientos agrícolas y su control constituye unas de las principales partidas de gastos. En general, se aplican los herbicidas, así como otros métodos de control, sin tener en cuenta el tipo de suelo y las características de estas plantas. Sobre el manejo de arvenses no existen trabajos de investigación que aborden aspectos de eficiencia energética de las producciones y daños al ambiente. Por lo antes señalado, el objetivo de esta investigación fue evaluar diversas tecnologías de manejo de arvenses en el cultivo de la caña de azúcar (Saccharum spp. híbrido), en cepas de primavera y retoño, en tres tipos de suelos, con el propósito de obtener producciones sustentables. El área de estudio se localizó en los campos de la Empresa Azucarera del municipio “Majibacoa”, provincia de Las Tunas (oriente de Cuba), que posee condiciones edafoclimáticas que abundan a lo largo del país. Los tres tipos de suelos más representativos son Fersialítico Pardo Rojizo ócrico, Pardo Mullido y Vertisol Crómico gléyco. En dicha área se han identificado 31 especies de arvenses, 16 de la clase Liliopsida y 15 de la Magnoliopsida. En un primer grupo de experimentos, se desarrollaron nueve ensayos de campo para evaluar la efectividad de herbicidas y mezclas de estos en el manejo de arvenses en el cultivo de la caña de azúcar, tanto en cepas de primavera como de retoño, en los tres tipos de suelos. Se establecieron parcelas de 80 m2 distribuidas en bloques al azar con cuatro réplicas. La efectividad se evaluó por medio del porcentaje de cobertura por arvenses y la fitotoxicidad provocada a las plantas de caña, teniendo en cuenta el coste asociado a cada tratamiento. En aplicaciones preemergentes en caña planta de primavera, el herbicida más eficiente fue el Isoxaflutole con dosis de 0,15; 0,20 y 0,25 kg.ha-1 de producto comercial (pc) en los suelos Fersialítico, Pardo y Vertisol respectivamente. En aplicaciones postemergentes tempranas la mezcla más eficiente fue la de Isoxaflutole + Ametrina +2,4-D con las dosis de Isoxaflutole citadas anteriormente. En aplicaciones preemergentes en cepa de retoño, el herbicida más eficiente fue el Isoxaflutole a dosis de 0,20 kg.ha-1 pc para el suelo Fersialítico y a 0,25 kg.ha-1 pc para los suelos Pardo y Vertisol. En un segundo grupo, se realizaron seis ensayos de campo distribuidos en dos fases. En la primera fase, se desarrollaron tres experimentos, uno por cada tipo de suelo, para evaluar la eficiencia de nueve tecnologías de manejo de arvenses (químicas y físicas combinadas) en cepa de primavera de caña de azúcar. En la siguiente fase, los tres ensayos restantes (uno por tipo de suelo) evaluaron tecnologías de manejo de arvenses durante dos ciclos de producción de caña de azúcar (etapa de primavera y retoño). En la etapa de primavera se aplicó la tecnología más eficiente de los tres experimentos anteriores y durante la etapa de retoño se evaluaron otras nueve tecnologías propias de este tipo de cepa. En estos experimentos los diferentes tratamientos se aplicaron en franjas distribuidas al azar con cuatro réplicas. En las tecnologías evaluadas se emplearon los herbicidas y mezclas que resultaron más eficientes en el primer grupo de experimentos. En cada caso, se evaluaron la eficiencia energética de la producción de azúcar y otros derivados, la resistencia a la penetración de los suelos, la carga contaminante hacia la atmósfera producto de la combustión del diésel y los beneficios al aplicar las diferentes tecnologías. En la primera fase (cepa de primavera), la tecnología con mejor resultado fue la aplicación preemergente de Isoxaflutole inmediatamente después de la plantación, seguida de descepe químico con Glufosinato de amonio, más labor con grada múltiple aproximadamente a los 80 días de la plantación y aplicación pre-cierre con Glufosinato de amonio. En la segunda fase (dos ciclos del cultivo), el mejor resultado se obtuvo cuando en la etapa de retoño se realizó una aplicación preemergente de Isoxaflutole, descepe químico con Glufosinato de amonio y aplicación pre-cierre con este mismo herbicida. En los tres tipos de suelos durante los dos ciclos, la eficiencia energética tuvo valores de 7,2 - 7,5, la resistencia a la penetración 1,2 - 1,5 MPa, la carga contaminante hacia la atmósfera fue de 63,3 - 64,9 kg.t-1 de caña cosechada y beneficios de 8.324 - 8.455 pesos cubanos por hectárea. Este estudio demuestra que un control eficiente de las arvenses debe tener en cuenta necesariamente el tipo de suelo. Así, en los Vertisoles, con mayor contenido en arcilla, se requieren mayores dosis de Isoxaflutole y la eficiencia energética de la producción es menor. La persistencia de ciertas arvenses, especialmente de la clase Liliopsida, requiere de un manejo integrado que incluya diferentes tipos de herbicidas. ABSTRACT In Cuba, weeds affecting the sugarcane are one of the main causes of low agricultural yields, and their control constitutes some of the main items of expenditure. In general, herbicides are applied, as well as other control methods, without keeping in mind the soil type and the characteristics of these plants. Moreover, weed control research approaching aspects about energy efficiency of the crop production, and environmental damages are missing. Hence, the objective of this investigation was to evaluate diverse technologies of weed handling in sugarcane (Saccharum spp. hybrid), both in spring cane plant and ratoon, in three types of soils, with the purpose of obtaining sustainable productions. The study area was located in the fields of the Sugar Enterprise of the Municipality "Majibacoa”, Las Tunas province (east of Cuba) that possesses ecological conditions that are plentiful along the country. The three more representative types of soils are Fersialitic, Brown, and Vertisol. In this area 31 weeds species have been identified, 16 of the Class Liliopsida and 15 of the Magnoliopsida. In a first group of experiments, nine field rehearsals were developed to evaluate the effectiveness of herbicides and mixtures of these for weed handling in sugarcane, in spring cane plants as well as in ratoon, in the three types of soils. Plots of 80 m-2 were distributed at random blocks with four replications. The effectiveness was evaluated by means of the covering percentage by weeds and the provoked toxicity to the cane plants, keeping in mind the cost associated to each treatment. In preemergence applications in spring cane plant, the most efficient herbicide was the Isoxaflutole with dose of 0.15; 0.20 and 0.25 kg.ha-1 of commercial product (pc) in the soils Fersialítico, Brown and Vertisol respectively. In early postemergence applications the most efficient mixture was that of Isoxaflutole + Ametrina + 2,4-D with the doses of Isoxaflutole mentioned previously. In preemergence applications in ratoon, the most efficient herbicide was the Isoxaflutole at dose of 0.20 kg.ha-1 pc for the soil Fersialític and to 0.25 kg. ha-1 pc for the Brown soil and Vertisol. In a second group, six field rehearsals distributed in two phases were carried out. In the first phase, three experiments were developed, one for each soil type, to evaluate the efficiency of nine technologies of weed handling in spring cane plant. In the following phase, the three remaining rehearsals (one for each soil type) diverse technologies of weed handling were evaluated during two cycles of sugarcane production (spring stage and ratoon). In the spring stage the most efficient technology in the three previous experiments was applied and during ratoon stage other nine technologies were evaluated. In these experiments the different treatments were applied in fringes distributed at random with four replicas. In the evaluated technologies the herbicides and mixtures were used selecting those that were more efficient in the first group of experiments. In each case, the energy efficiency of the sugar production and other derivatives, the soil penetration resistance, the polluting load toward the atmosphere product of the combustion, and the benefits when applying the different technologies were all evaluated. In the first phase (spring cane plant), the technology with better result was the preemergence application of Isoxaflutole immediately after the plantation, followed by chemical eradication with Ammonia Glufosinate, hoeing work with multiple tier approximately to the 80 days of the plantation and pre-closing application with Ammonia Glufosinate. In the second phase (two cycles of the cultivation), the best result was obtained when a preemergence application of Isoxaflutole was carried out in sprout's stage, chemical eradication with Ammonia Glufosinate and pre-closing application with this same herbicide. In the three types of soils during the two cycles, the energy efficiency achieved values of 7.2 to 7.5, the resistance to the penetration 1.2 - 1.5 MPa, the polluting load toward the atmosphere was of 63.3 - 64.9 kg.t-1 of the harvested cane and the obtained benefits of 8,324 - 8,455 Cuban pesos per hectare. This study demonstrates that an efficient control of the weeds should necessarily keep in mind the soil type. This way, in the Vertisols, with more clay content, bigger dose of Isoxaflutole is required and the energy efficiency of the production is smaller. The persistence of certain weeds, especially of the class Liliopsida, requires of an integrated handling him to include different types of herbicides.

Design of a solar incubator. Part 1: Monitoring temperature and enthalpy gradients under commercial production

The real increase in energy prices and the intention of reducing pollutant emissions in developed countries makes interesting to use solar energy in all the processes where its application is possible. As it is demonstrated in countries sited at latitudes with optimal conditions of solar radiation and temperature, it is possible to use solar energy as heat source for small-scale hatchery [1,2], but beyond, making a design for proper installation; it is possible to use solar energy as main or support energy source in medium and large size incubators . Monitoring of a normal actual process using temperature and relative humidity sensors is necessary to know the actual operating conditions that the solar heating system must be designed and sized for. Moreover, the identification and analysis of temperature and enthalpy gradients inside the incubator is of major importance.

Modelling sugar beet water use in Spain

Crop production has a great contribution to water use and abstraction. Sugar beet is an important crop in irrigated land in Spain and covers 70.000 Ha. Crop and resources management are key factors for a sustainable agriculture. The aim of this work is to mode the sugar beet crop growth and water consumption in order to quantify crop water use and virtual water content in different growing conditions.

Effect of level of fiber of the rearing phase diets on egg production, digestive tract traits, and body measurements of brown egg-laying hens fed diets differing in energy concentration

This research studied the effects of additional fiber in the rearing phase diets on egg production, gastrointestinal tract (GIT) traits, and body measurements of brown egg-laying hens fed diets varying in energy concentration from 17 to 46 wk of age. The experiment was completely randomized with 10 treatments arranged as a 5 × 2 factorial with 5 rearing phase diets and 2 laying phase diets. During the rearing phase, treatments consisted of a control diet based on cereals and soybean meal and 4 additional diets with a combination of 2 fiber sources (cereal straw and sugar beet pulp, SBP) at 2 levels (2 and 4%). During the laying phase, diets differed in energy content (2,650 vs. 2,750 kcal AMEn/kg) but had the same amino acid content per unit of energy. The rearing diet did not affect any production trait except egg production that was lower in birds fed SBP than in birds fed straw (91.6 and 94.1%, respectively; P < 0.05). Laying hens fed the high energy diet had lower feed intake (P < 0.001), better feed conversion (P < 0.01), and greater BW gain (P < 0.05) than hens fed the low energy diet but egg production and egg weight were not affected. At 46 wk of age, none of the GIT traits was affected by previous dietary treatment. At this age, hen BW was positively related with body length (r = 0.500; P < 0.01), tarsus length (r = 0.758; P < 0.001), and body mass index (r = 0.762; P < 0.001) but no effects of type of diet on these traits were detected. In summary, the inclusion of up to 4% of a fiber source in the rearing diets did not affect GIT development of the hens but SBP reduced egg production. An increase in the energy content of the laying phase diet reduced ADFI and improved feed efficiency but did not affect any of the other traits studied.

Approaches Regarding the Competition in Romanian Sugar Market

This paper proposes an economic instrument designed to assess the competitive nature of the sugar industry in Romania. In the first part of the paper is presented the theoretical background underlying index (HHI) and its calculation methodology. Then comes the results of a first application of this index for a total of 10 plants in the sugar industry, the robustness of these results is discussed. We believe HHI is a proactive tool that may prove useful competition authority, in its pursuit of continuous monitoring of various industries in the economy and in the internal decision-making on resource allocation institution (Peacock, and Prisecaru, 2013).The starting point of our research is to free competition in the European market with competitors much stronger than Romanian plants, plants that produce at a price lower than the domestic ones. In our study we will see if it is a concentration of production in factories around the strongest in Romania, concentration accompanied by the collapse of those who could not resist the market.The market concentration, competition policy, we will follow using the HHI index, for evaluation of impact analysis on existing trade, the number and size of competitors, protecting existing sales structures, avoiding disruptions in the competitive environment, etc.