A Comparison of Sensitivity/Uncertainty Methodologies for the Tritium Production in the HFTM/IFMIF Specimen Cells and measurements in Tritium activity in HCLL TBM mock-up LiPb

The prediction of the tritium production is required for handling procedures of samples, safety&maintenance and licensing of the International Fusion Materials Irradiation Facility (IFMIF).

Design, manufacturing and measurements of a metal-less V-groove RXI collimator

A metal-less RXI collimator has been designed. Unlike to the conventional RXI collimators, whose back surface and central part of the front surface have to be metalized, this collimator does not include any mirrored surface. The back surface is designed as a grooved surface providing two TIR reflections for all rays impinging on it. The main advantage of the presented design is lower manufacturing cost since there is no need for the expensive process of metalization. Also, unlike to the conventional RXI collimators this design performs good colour mixing. The first prototype of V-groove RXI collimator has been made of PMMA by direct cutting using a five axis diamond turning machine. The experimental measurements of the first prototype are presented.

Radio propagation modeling and measurements for ZigBee based indoor wireless sensor networks

The deployment of nodes in Wireless Sensor Networks (WSNs) arises as one of the biggest challenges of this field, which involves in distributing a large number of embedded systems to fulfill a specific application. The connectivity of WSNs is difficult to estimate due to the irregularity of the physical environment and affects the WSN designers? decision on deploying sensor nodes. Therefore, in this paper, a new method is proposed to enhance the efficiency and accuracy on ZigBee propagation simulation in indoor environments. The method consists of two steps: automatic 3D indoor reconstruction and 3D ray-tracing based radio simulation. The automatic 3D indoor reconstruction employs unattended image classification algorithm and image vectorization algorithm to build the environment database accurately, which also significantly reduces time and efforts spent on non-radio propagation issue. The 3D ray tracing is developed by using kd-tree space division algorithm and a modified polar sweep algorithm, which accelerates the searching of rays over the entire space. Signal propagation model is proposed for the ray tracing engine by considering both the materials of obstacles and the impact of positions along the ray path of radio. Three different WSN deployments are realized in the indoor environment of an office and the results are verified to be accurate. Experimental results also indicate that the proposed method is efficient in pre-simulation strategy and 3D ray searching scheme and is suitable for different indoor environments.

Neutron spectra and dosimetric assessment around a neutron Howitzer container

The neutron Howitzer container at the Neutron Measurements Laboratory of the Nuclear Engineering Department of the Polytechnic University of Madrid (UPM), is equipped with a 241Am-Be neutron source of 74 GBq in its center. The container allows the source to be in either the irradiation or the storage position. To measure the neutron fluence rate spectra around the Howitzer container, measurements were performed using a Bonner spheres spectrometer and the spectra were unfolded using the NSDann program. A calibrated neutron area monitor LB6411 was used to measure the ambient dose equivalent rates, H*(10). Detailed Monte-Carlo simulations were performed to calculate the measured quantities at the same positions. The maximum relative deviation between simulations and measurements was 19.53%. After validation, the simulated model was used to calculate the equivalent dose rate in several key organs of a voxel phantom. The computed doses in the skin and lenses of the eyes are within the ICRP recommended dose limits, as is the H*(10) value for the storage position.

A characterization of conserved quantities in non-equilibrium thermodynamics

The well-known Noether theorem in Lagrangian and Hamiltonian mechanics associates symmetries in the evolution equations of a mechanical system with conserved quantities. In this work, we extend this classical idea to problems of non-equilibrium thermodynamics formulated within the GENERIC (General Equations for Non-Equilibrium Reversible-Irreversible Coupling) framework. The geometric meaning of symmetry is reviewed in this formal setting and then utilized to identify possible conserved quantities and the conditions that guarantee their strict conservation. Examples are provided that demonstrate the validity of the proposed definition in the context of finite and infinite dimensional thermoelastic problems.

Interaction between karstic aquifers and allogenic rivers: the aquifer of the national park of the ephemeral river Lobos Canyon (Spain)

A methodology is described for understanding the interaction of karstic aquifers with allogenic rivers, where little information is available. This methodology includes conventional hydrogen- ology methods tracer tests and measurements of flow into, out of and circulating within the karstic system. The method is designed to un- derstand the hydrogeological behaviour of a river in sufficient detail, given a short study pe- riod. The methodology is applied to a karstic system in Spain, obtaining useful, quantitative results for a hydrological year, such as an esti- mate of the water balance, differentiation be- tween autogenic and allogenic natural recharge, relationship and connection between the river and the aquifer, and measurements of infiltration capacity in watercourses under different hydro- logical situations. The paper deals with a useful example that could be applied to other rivers and aquifers where few data are available. It can be applied to aquifers under a natural regime and Mediterranean climate.

Analysis of Combined Bending and Punching Tests of Reinforced Concrete Slabs within IMPACT III Project

The paper reports on a collaborative effort between the Swiss Federal Nuclear Safety Inspectorate (ENSI) and their consultants Principia and Stangenberg. As part of the IMPACT III project, reduced scale impact tests of reinforced concrete structures were carried out. The simulation of test X3 is presented here and the numerical results are compared with those obtained in the test, carried out in August 2013. The general object is to improve the safety of nuclear facilities and, more specifically, to demonstrate the capabilities of current simulation techniques to reproduce the behaviour of a reinforced concrete structure impacted by a soft missile. The missile is a steel tube with a mass of 50 kg and travelling at 140 m/s. The target is a 250 mm thick, 2,1 m by 2,1 m reinforced concrete wall, held in a stiff supporting frame. The reinforcement includes both longitudinal and transverse rebars. Calculations were carried out before and after the test with Abaqus (Principia) and SOFiSTiK (Stangenberg). In the Abaqus simulation the concrete is modelled using solid elements and a damaged plasticity formulation, the rebars with embedded beam elements, and the missile with shell elements. In SOFiSTiK the target is modelled with non-linear, layered shell elements for the reinforcement on both sides; non-linear shear deformations of shell/plate elements are approximately included. The results generally indicate a good agreement between calculations and measurements.

Methodology for the metric restoration of the historical cartography applied to Francisco Coello's cartografic series of the Royal Site of Aranjuez

Hojas Kilométricas (Kilometric Sheets). Specifically, the study focuses on those sheets referring to the city centre and surrounding area of the Royal Site of Aranjuez, a town in the south of the Province of Madrid. The aim of this study is to restore the actual size and measurements of scanned images of the Hojas Kilométricas. This would allow us, among other things, to reestablish both the format and scale of the original plans. To achieve this goal it is necessary to rectify and then georeference these images, i.e. assign them a geographic reference system. This procedure is essential in the overlaying and comparison of the Hojas Kilométricas of the Royal Site with other historical cartography as well as other sources related to the same area from different time periods. Subsequent research would allow us, for example, to reconstruct the time-evolution of the urban area, to spot new construction and to pinpoint the locations of any altered or missing buildings or architectural features. In addition, this would allow us to develop and integrate databases for GIS models applicable to the management of our cultural heritage.

A modelling language for the resilience assessment of networked systems of systems

Systems of Systems (SoS) present challenging features and existing tools result often inadequate for their analysis, especially for heteregeneous networked infrastructures. Most accident scenarios in networked systems cannot be addressed by a simplistic black or white (i.e. functioning or failed) approach. Slow deviations from nominal operation conditions may cause degraded behaviours that suddenly end up into unexpected malfunctioning, with large portions of the network affected. In this paper,we present a language for modelling networked SoS. The language makes it possible to represent interdependencies of various natures, e.g. technical, organizational and human. The representation of interdependencies is based on control relationships that exchange physical quantities and related information. The language also makes it possible the identification of accident scenarios, by representing the propagation of failure events throughout the network. The results can be used for assessing the effectiveness of those mechanisms and measures that contribute to the overall resilience, both in qualitative and quantitative terms. The presented modelling methodology is general enough to be applied in combination with already existing system analysis techniques, such as risk assessment, dependability and performance evaluation

Procedimiento De Amplificador De Envolvente De Señales Moduladas En RF Para Técnicas EER Y ET

An envelope amplifier for an EER (Envelope Elimination and Restoration) and ET (Envelope Tracking) techniques is shown in this paper. The amplifier is based on a high speed two phases buck converter and employs RF LDMOS technology for the switching stage. A DPWM (Digital Pulse With Modulation) signal is used to control the amplifier by means of a functions generator. Simulations and measurements on a circuit prototype are presented showing a good agreement. Up to 125W output peak power can be delivered over a 5Ω load resistor. About 80% efficiency has been obtained. And at the two tone test, the third order intermodulation products (IP3) remain below 45dBc over a 2MHz bandwidth.

3x3 Multibeam Network for a Triangular Array of Three Radiating Elements

A multibeam antenna study based on Butler network will be undertaken in this document. These antenna designs combines phase shift systems with multibeam networks to optimize multiple channel systems. The system will work at 1.7 GHz with circular polarization. Specifically, result simulations and measurements of 3 element triangular subarray will be shown. A 45 element triangular array will be formed by the subarrays. Using triangular subarrays, side lobes and crossing points are reduced.

6x3 Microstrip Beam Forming Network for Multibeam Triangular Array

A six inputs and three outputs structure which can be used to obtain six simultaneous beams with a triangular array of 3 elements is presented. The beam forming network is obtained combining balanced and unbalanced hybrid couplers and allows to obtain six main beams with sixty degrees of separation in azimuth direction. Simulations and measurements showing the performance of the array and other detailed results are presented

Principales efectos de la aplicación de una metodología destinada a inducir la muda en ponedoras comerciales sobre su producción cuantitativa y cualitativa durante el segundo ciclo de puesta

En la presente Tesis Doctoral se ha estudiado el efecto de una metodología para inducir la muda en dos estirpes de gallinas ponedoras comerciales, una ligera y otra semipesada, mediante el suministro de tres alimentos: salvado de trigo, cebada en grano y un pienso comercial de ponedoras aportado en cantidad restringida. Se realizaron dos pruebas en dos lotes diferentes de gallinas. En la primera de ellas se utilizaron 472 animales (236 de cada estirpe) alojados en jaulas con cuatro o seis gallinas por jaula, con una estructura factorial 2 x 3 x 2 (2 estirpes, 3 alimentos, 2 densidades) y una duración total de 32 semanas (4 de muda y 28 de producción posmuda). En la segunda prueba fueron 432 animales los utilizados (216 de cada estirpe), alojados en grupos de cuatro aves por jaula, con una estructura factorial 2 x 3 (2 estirpes, 3 alimentos) y una duración de 27 semanas (4 de muda y 23 de producción postmuda). En los dos experimentos realizados se estudió el efecto del uso de los alimentos citados para inducir de la muda sobre los resultados cuantitativos: pérdida de peso vivo durante la muda e intensidad de puesta, peso medio del huevo y masa de huevo diaria, durante y después de la muda, así como la distribución de la puesta en clases comerciales durante el segundo ciclo de puesta. Así como sobre los resultados cualitativos después de la muda: color de la cáscara de los huevos morenos, espesor de la cáscara, peso específico del huevo, altura del albumen, unidades Haugh y color de la yema. En la primera prueba se estudió, además, el efecto que la inducción de la muda mediante los tres alimentos considerados tuvo sobre la regresión del aparato reproductor de las gallinas durante este período de muda. En el primer experimento se observaron diferencias entre estirpes. Las gallinas ligeras tuvieron una más rápida regresión del aparato reproductor (ovario+oviducto) (P=0,003) que las semipesadas, aunque la regresión total no presentó diferencias significativas. Las gallinas semipesadas tuvieron mejores resultados después de la muda en intensidad de puesta (P<0,0001), en peso medio del huevo (P<0,0001) y en masa de huevo diaria (P=0,0002). También hubo diferencias significativas para las variables cualitativas espesor de la cáscara (mayor en huevos de gallinas semipesadas) mientras que los huevos procedentes de gallinas ligeras presentaron mejores valores de altura del albumen, de unidades Haugh y de color de yema; todas estas variables tuvieron un nivel de significación P<0,0001. El suministro restringido de pienso dio lugar a un mayor porcentaje de pérdida de peso vivo (P<0,0001) aunque la regresión de los órganos del aparato reproductor fue la más baja (P<0,003), no habiéndose encontrado diferencias entre los otros dos alimentos utilizados. Con este alimento también fue más lenta (P<0,0001) la disminución de la puesta durante la muda, aunque fue mayor la producción durante el segundo ciclo (P<0,0001). La única variable cualitativa afectada fue el espesor de cáscara (P<0,0001), con valores más altos en los huevos producidos por las gallinas mudadas con cebada. Los grupos de seis gallinas por jaula produjeron más huevos durante la muda (P<0,0001) aunque después de ésta la densidad de animales no tuvo efecto significativo, como tampoco lo hubo sobre los parámetros de calidad del huevo. En la segunda prueba las gallinas semipesadas experimentaron un menor porcentaje de pérdida de peso corporal (P<0,01) pero tuvieron mayores índices de puesta (P<0,001) y de huevos clasificables (P<0,001) durante la muda. En cambio, durante el segundo ciclo de producción las gallinas ligeras produjeron más huevos (P=0,0041), de menor peso (P<0,02) y con menor consumo de pienso (P<0,001). Los huevos puestos por las gallinas semipesadas tuvieron mayor espesor de cáscara y mayor color de yema, pero peor calidad de albumen (P<0,0001). La mayor pérdida de peso la experimentaron las gallinas mudadas con salvado (P<0,02). La producción durante la muda fue mayor (P<0,001) en las gallinas que consumieron pienso en cantidad restringida y también fueron las que tuvieron menor intensidad de puesta (P<0,006) y masa de huevo diaria (P<0,042) durante el segundo ciclo. El tratamiento de muda no tuvo efecto significativo sobre la calidad del huevo en esta segunda prueba. La principal conclusión que merece destacarse es que es posible inducir la muda a las gallinas ponedoras utilizando alimentos bajos en energía o en proteína, o altos en fibra, con un porcentaje de pérdida de peso vivo no tan alta como las recomendaciones tradicionales, y alcanzar buenos resultados productivos, tanto cuantitativos como cualitativos, durante el segundo ciclo de puesta. ABSTRACT Present Doctoral Thesis has studied the effect of a methodology to induce molting in two strains of commercial laying hens, one light and another semi-heavy one, through the provision of three feed: wheat bran, barley grain and a commercial laying hens feed provided in limited quantity. Two tests were performed in two different lots of layers. In the first 472 animals were used (236 of each strain) housed in cages with four or six hens per cage, with a structure 2 x 3 x 2 factorial (2 strains, 3 meals, 2 densities) and a total duration of 32 weeks (4 of molt and 28 of postmolting). In the second test 432 animals were used (216 each strain), housed in groups of four birds per cage, with a structure factorial 2 x 3 (2 strain, 3 meals) along 27 weeks (4 of molt and 23 of postmolting). In both experiments, we studied the effect of the use of above mentioned foods to induce molting on the quantitative results: body weight lost during the molt and laying index, average egg weight and egg mass daily during and after the molt, as well as on grading in commercial classes during the second laying cycle. As well as on qualitative outcomes after the molt: colour of Brown eggsshell, shell thickness, specific density, albumen height, Haugh units and yolk colour. In the first test was studied, in addition, the effect of induction of molting through the three feed considered on the regression of the reproductive tract of hens during molting period. In the first experiment, differences between strains were observed. Light hens had a faster regression of the reproductive tract (ovary+oviduct) (P=0,003) than semi-heavy hens, although the total regression did not present significant differences. Semi-heavy hens had better outcomes after the molt in laying index (P<0.0001), in average egg weight (P<0.0001) and daily egg mass (P=0, 0002). There were also significant differences for the qualitative variables (higher in semi-heavy hen eggs) as shell thickness while light chicken eggs showed better values of albumen height, Haugh units and yolk color; all these variables had the same level of significance (P<0.0001). Restricted supply of layer feed resulted in a greater percentage of live weight loss (P<0.0001) although the regression of the reproductive organs was the lowest (P<0.003), having not found differences between the other two feed used. With this food decreasing of laying during molting period was also slower (P<0.0001), although production was higher during the second cycle (P < 0.0001). The only qualitative variable affected was shell thickness (P<0.0001), with higher values in the eggs produced by hens molted with barley. Groups of six hens per cage produced more eggs during the moult (P<0.0001) but after this animal density had no significant effect, as neither had it on egg quality parameters. In the second trial hens semi-heavy experienced a lower percentage of body weight loss (P<0.01) but had higher rates of egg production (P<0.001) and of grading eggs (P<0.001) during the moult. On the other hand, during the second production cycle light hens produced more eggs (P=0,0041), of lower weight (P < 0.02) and with less feed intake (P<0.001). Eggs from semi-heavy hens had thicker shell and greater color yolk, but poorer quality of albumen (P<0.0001). The greater weight loss was experimented by the hens molted with wheat bran (P=0.02). Production during molting period was greater (P<0.001) in hens which consumed feed in restricted quantities and were also less the laying index (P=0.006) and daily egg mass (P=0.042) during the second cycle. The molting treatment had no significative effect on the quality of the egg in this second test. The main conclusion that deserves to stand out is that it is possible to induce molting hens using foods low in energy or in protein or high in fiber, with a percentage of live weight loss not as high as the traditional recommendations, and achieve good productive, both quantitative and qualitative results during the second implementation cycle.

Transpose return relation method for designing low noise oscillators

In this paper, a new linear method for optimizing compact low noise oscillators for RF/MW applications will be presented. The first part of this paper makes an overview of Leeson's model. It is pointed out, and it is demonstrates that the phase noise is always the same inside the oscillator loop. It is presented a general phase noise optimization method for reference plane oscillators. The new method uses Transpose Return Relations (RRT) as true loop gain functions for obtaining the optimum values of the elements of the oscillator, whatever scheme it has. With this method, oscillator topologies that have been designed and optimized using negative resistance, negative conductance or reflection coefficient methods, until now, can be studied like a loop gain method. Subsequently, the main disadvantage of Leeson's model is overcome, and now it is not only valid for loop gain methods, but it is valid for any oscillator topology. The last section of this paper lists the steps to be performed to use this method for proper phase noise optimization during the linear design process and before the final non-linear optimization. The power of the proposed RRT method is shown with its use for optimizing a common oscillator, which is later simulated using Harmonic Balance (HB) and manufactured. Then, the comparison of the linear, HB and measurements of the phase noise are compared.

Diseño de la sala 6 de Kinépolis (Madrid) con un sistema Dolby ATMOS

El objetivo de este Proyecto Fin de Carrera es el estudio y simulación de la sonorización de una sala de cine mediante la utilización del sistema DOLBY ATMOS. Para ello, se simulará la sala 6 del complejo de cines Kinépolis de Madrid utilizando el programa de simulación electroacústica EASE en el que se dispondrá el sistema de sonido DOLBY ATMOS. Primero se procederá a realizar el modelo geométrico en el programa EASE, a partir de los planos de la instalación y medidas realizadas en el recinto. Este programa de simulación permite obtener los parámetros acústicos y electroacústicos necesarios para realizar el estudio de la sala. Luego se diseñará el sistema de sonido de acuerdo a las disposiciones del sistema DOLBY ATMOS, mediante la ubicación de sistemas de altavoces de cine existentes en el mercado, siempre intentando mantener el uso de la sala de forma convencional como DOLBY DIGITAL y cumpliendo los requisitos de uniformidad y ángulos de apuntamiento recomendados por DOLBY. A continuación, una vez dispuestos los altavoces, se procederá a su configuración, realizando una ecualización y ajuste de nivel de manera individual para cada una de las fuentes sonoras, tanto de los altavoces de pantalla, altavoces de surround de pared y techo y los altavoces de subgraves. Como resultado de todo ello, se comprobarán parámetros como la inteligibilidad, respuesta impulsiva, respuesta en frecuencia y tiempo de reverberación en diferentes puntos de escucha, comparando los resultados obtenidos entre ellos. También se realizará una configuración compatible con el sistema de sonido 7.1, realizando su correspondiente configuración, ecualización, ajuste y aplicando los retardos necesarios. Una vez esté todo configurado, será dar un presupuesto de lo que supondría la reformar de un cine convencional a un sistema DOLBY ATMOS, teniendo en cuenta el número de altavoces disponibles en la sala actual, los modelos utilizados, amplificadores y mano de obra. También se realizará un diagrama de conexionado del sistema de sonido utilizado en el proyecto, incluyendo todos los parámetros necesarios de la configuración. Por último se comprobará la viabilidad técnica y económica del sistema diseñado, viendo cuál es la opción que más se adecua a cada necesidad y sugiriendo soluciones a los posibles problemas que se puedan encontrar. ABSTRACT. The main aim of this Project is the study and simulation of the sound of a movie theater by using DOLBY ATMOS system. It is going to be simulated the movie theatre 6 at Kinepolis cinema complex in Madrid using the simulation program EASE according to the sound system DOLBY ATMOS. First of all we proceed to conduct the geometric pattern in the EASE program, from installation drawings and measurements made on the premises. This simulation program allows getting the acoustic and electroacoustic parameters necessary for the study of the theatre. Then the sound system designed according to the suggestions of ATMOS DOLBY, by locating theater speaker systems on the market, always trying to keep the use of the room for DOLBY DIGITAL conventional and meeting the requirements of uniformity and pointing angles DOLBY recommended. Then, once the speakers are prepared, you can proceed to configure, make equalization and level setting individually for each of the sound sources, both screen speakers, surround speakers (wall and ceiling) and subwoofer. As a result, parameters are checked as intelligibility, impulse response, frequency response and reverberation time in different listening points, comparing the results between each other. There will also be configured to support 7.1 sound system, making the corresponding settings, equalization, level setting and applying the necessary delays. Once everything is configured, it will give an estimate of what would be the reform of a conventional film DOLBY ATMOS system, taking into account the number of speakers available in the current room, the models used, amplifiers and labor. Also there will be a wiring diagram of the sound system used in this project, including all of the configuration parameters needed. Finally, check the technical and economic feasibility of the designed system, seeing what is the option that best suits to each need and suggesting possible solutions to problems you might find during the process.