The determinants of the quality of Sales-Marketing Interface in a Multinational Customer Brand Focused Company: The Latin American Branches

Customer evolution and changes in consumers, determine the fact that the quality of the interface between marketing and sales may represent a true competitive advantage for the firm. Building on multidimensional theoretical and empirical models developed in Europe and on social network analysis, the organizational interface between the marketing and sales departments of a multinational high-growth company with operations in Argentina, Uruguay and Paraguay is studied. Both, attitudinal and social network measures of information exchange are used to make operational the nature and quality of the interface and its impact on performance. Results show the existence of a positive relationship of formalization, joint planning, teamwork, trust and information transfer on interface quality, as well as a positive relationship between interface quality and business performance. We conclude that efficient design and organizational management of the exchange network are essential for the successful performance of consumer goods companies that seek to develop distinctive capabilities to adapt to markets that experience vertiginous changes

Contribution to the quality improvement of the antenna measurement using post-processing techniques = Contribución a la mejora de la calidad de medida de antena usando técnicas de post-procesado

One important task in the design of an antenna is to carry out an analysis to find out the characteristics of the antenna that best fulfills the specifications fixed by the application. After that, a prototype is manufactured and the next stage in design process is to check if the radiation pattern differs from the designed one. Besides the radiation pattern, other radiation parameters like directivity, gain, impedance, beamwidth, efficiency, polarization, etc. must be also evaluated. For this purpose, accurate antenna measurement techniques are needed in order to know exactly the actual electromagnetic behavior of the antenna under test. Due to this fact, most of the measurements are performed in anechoic chambers, which are closed areas, normally shielded, covered by electromagnetic absorbing material, that simulate free space propagation conditions, due to the absorption of the radiation absorbing material. Moreover, these facilities can be employed independently of the weather conditions and allow measurements free from interferences. Despite all the advantages of the anechoic chambers, the results obtained both from far-field measurements and near-field measurements are inevitably affected by errors. Thus, the main objective of this Thesis is to propose algorithms to improve the quality of the results obtained in antenna measurements by using post-processing techniques and without requiring additional measurements. First, a deep revision work of the state of the art has been made in order to give a general vision of the possibilities to characterize or to reduce the effects of errors in antenna measurements. Later, new methods to reduce the unwanted effects of four of the most commons errors in antenna measurements are described and theoretical and numerically validated. The basis of all them is the same, to perform a transformation from the measurement surface to another domain where there is enough information to easily remove the contribution of the errors. The four errors analyzed are noise, reflections, truncation errors and leakage and the tools used to suppress them are mainly source reconstruction techniques, spatial and modal filtering and iterative algorithms to extrapolate functions. Therefore, the main idea of all the methods is to modify the classical near-field-to-far-field transformations by including additional steps with which errors can be greatly suppressed. Moreover, the proposed methods are not computationally complex and, because they are applied in post-processing, additional measurements are not required. The noise is the most widely studied error in this Thesis, proposing a total of three alternatives to filter out an important noise contribution before obtaining the far-field pattern. The first one is based on a modal filtering. The second alternative uses a source reconstruction technique to obtain the extreme near-field where it is possible to apply a spatial filtering. The last one is to back-propagate the measured field to a surface with the same geometry than the measurement surface but closer to the AUT and then to apply also a spatial filtering. All the alternatives are analyzed in the three most common near-field systems, including comprehensive noise statistical analyses in order to deduce the signal-to-noise ratio improvement achieved in each case. The method to suppress reflections in antenna measurements is also based on a source reconstruction technique and the main idea is to reconstruct the field over a surface larger than the antenna aperture in order to be able to identify and later suppress the virtual sources related to the reflective waves. The truncation error presents in the results obtained from planar, cylindrical and partial spherical near-field measurements is the third error analyzed in this Thesis. The method to reduce this error is based on an iterative algorithm to extrapolate the reliable region of the far-field pattern from the knowledge of the field distribution on the AUT plane. The proper termination point of this iterative algorithm as well as other critical aspects of the method are also studied. The last part of this work is dedicated to the detection and suppression of the two most common leakage sources in antenna measurements. A first method tries to estimate the leakage bias constant added by the receiver’s quadrature detector to every near-field data and then suppress its effect on the far-field pattern. The second method can be divided into two parts; the first one to find the position of the faulty component that radiates or receives unwanted radiation, making easier its identification within the measurement environment and its later substitution; and the second part of this method is able to computationally remove the leakage effect without requiring the substitution of the faulty component. Resumen Una tarea importante en el diseño de una antena es llevar a cabo un análisis para averiguar las características de la antena que mejor cumple las especificaciones fijadas por la aplicación. Después de esto, se fabrica un prototipo de la antena y el siguiente paso en el proceso de diseño es comprobar si el patrón de radiación difiere del diseñado. Además del patrón de radiación, otros parámetros de radiación como la directividad, la ganancia, impedancia, ancho de haz, eficiencia, polarización, etc. deben ser también evaluados. Para lograr este propósito, se necesitan técnicas de medida de antenas muy precisas con el fin de saber exactamente el comportamiento electromagnético real de la antena bajo prueba. Debido a esto, la mayoría de las medidas se realizan en cámaras anecoicas, que son áreas cerradas, normalmente revestidas, cubiertas con material absorbente electromagnético. Además, estas instalaciones se pueden emplear independientemente de las condiciones climatológicas y permiten realizar medidas libres de interferencias. A pesar de todas las ventajas de las cámaras anecoicas, los resultados obtenidos tanto en medidas en campo lejano como en medidas en campo próximo están inevitablemente afectados por errores. Así, el principal objetivo de esta Tesis es proponer algoritmos para mejorar la calidad de los resultados obtenidos en medida de antenas mediante el uso de técnicas de post-procesado. Primeramente, se ha realizado un profundo trabajo de revisión del estado del arte con el fin de dar una visión general de las posibilidades para caracterizar o reducir los efectos de errores en medida de antenas. Después, se han descrito y validado tanto teórica como numéricamente nuevos métodos para reducir el efecto indeseado de cuatro de los errores más comunes en medida de antenas. La base de todos ellos es la misma, realizar una transformación de la superficie de medida a otro dominio donde hay suficiente información para eliminar fácilmente la contribución de los errores. Los cuatro errores analizados son ruido, reflexiones, errores de truncamiento y leakage y las herramientas usadas para suprimirlos son principalmente técnicas de reconstrucción de fuentes, filtrado espacial y modal y algoritmos iterativos para extrapolar funciones. Por lo tanto, la principal idea de todos los métodos es modificar las transformaciones clásicas de campo cercano a campo lejano incluyendo pasos adicionales con los que los errores pueden ser enormemente suprimidos. Además, los métodos propuestos no son computacionalmente complejos y dado que se aplican en post-procesado, no se necesitan medidas adicionales. El ruido es el error más ampliamente estudiado en esta Tesis, proponiéndose un total de tres alternativas para filtrar una importante contribución de ruido antes de obtener el patrón de campo lejano. La primera está basada en un filtrado modal. La segunda alternativa usa una técnica de reconstrucción de fuentes para obtener el campo sobre el plano de la antena donde es posible aplicar un filtrado espacial. La última es propagar el campo medido a una superficie con la misma geometría que la superficie de medida pero más próxima a la antena y luego aplicar también un filtrado espacial. Todas las alternativas han sido analizadas en los sistemas de campo próximos más comunes, incluyendo detallados análisis estadísticos del ruido con el fin de deducir la mejora de la relación señal a ruido lograda en cada caso. El método para suprimir reflexiones en medida de antenas está también basado en una técnica de reconstrucción de fuentes y la principal idea es reconstruir el campo sobre una superficie mayor que la apertura de la antena con el fin de ser capaces de identificar y después suprimir fuentes virtuales relacionadas con las ondas reflejadas. El error de truncamiento que aparece en los resultados obtenidos a partir de medidas en un plano, cilindro o en la porción de una esfera es el tercer error analizado en esta Tesis. El método para reducir este error está basado en un algoritmo iterativo para extrapolar la región fiable del patrón de campo lejano a partir de información de la distribución del campo sobre el plano de la antena. Además, se ha estudiado el punto apropiado de terminación de este algoritmo iterativo así como otros aspectos críticos del método. La última parte de este trabajo está dedicado a la detección y supresión de dos de las fuentes de leakage más comunes en medida de antenas. El primer método intenta realizar una estimación de la constante de fuga del leakage añadido por el detector en cuadratura del receptor a todos los datos en campo próximo y después suprimir su efecto en el patrón de campo lejano. El segundo método se puede dividir en dos partes; la primera de ellas para encontrar la posición de elementos defectuosos que radian o reciben radiación indeseada, haciendo más fácil su identificación dentro del entorno de medida y su posterior substitución. La segunda parte del método es capaz de eliminar computacionalmente el efector del leakage sin necesidad de la substitución del elemento defectuoso.

Influence of origin of the beans on protein quality and nutritive value of commercial soybean meals.

Chemical composition and correlations between chemical analyses and protein quality of 454 batches of SBM of 3 different origins (USA, n=168; Brazil (BRA), n=139, and Argentine (ARG), n=147) were studied. Samples were collected during a 6-yr period. SBM from USA had more CP, sucrose and stachyose and less NDF (P<0.001) than SBM from ARG and BRA. CP content was negatively related (P<0.001) with sucrose for USA meals and with NDF for ARG and BRA meals. Also, P content was positively related (P<0.01) with CP content of the meals. PDI and KOH solubility were higher (P<0.001) for USA than for ARG or BRA SBM, values that were positively related (P<0.001) with trypsin inhibitor activity of the meals. In addition, USA meals had more lys, met+cys, thr, and trp than BRA and ARG meals (P < 0.001). Per unit of CP, lys content was negatively related (P<0.001) with CP content for USA, positively for BRA, and no relations was found for ARG meals. It is concluded that nutritive values and protein quality of the meals varied widely among soybean origins. Consequently, the origin of the beans should be considered in the evaluation of the nutritive value of commercial SBM for non-ruminant animals.

Social Indicators in the Sustainable Refurbishment: Calculating Quality of Life Indicator in a Residential Building in Málaga

How can we measure ‘quality of life’? The sustainable refurbishment goes beyond strictly energy aspects. Sustainability indicators are needed to facilitate data collection and to provide information which does not require too time-consuming calculations. Thus, you can offer an idea of the extent and quality of the rehabilitation before starting the project and, also, the obtained results can be evaluated in an agile way after the refurbishment. From a list of social indicators gathered from different methods, sustainability assessment tools and International and European standards, three social indicators are proposed: Users Satisfaction, Participation Agreement and Quality of Life. This paper shows the development of Quality of Life social indicator, the more closely related to the main objectives of Researchand Development Project “Sustainable Refurbishment”: improving energy efficiency and wellbeing of users in existing residential buildings. Finally, this social indicator is applied to a real case study in Málaga (Spain).

Quantitative Determination of the Relationship between Internal Validity and Bias in Software Engineering Experiments: Consequences for Systematic Literature Reviews

Quality assessment is one of the activities performed as part of systematic literature reviews. It is commonly accepted that a good quality experiment is bias free. Bias is considered to be related to internal validity (e.g., how adequately the experiment is planned, executed and analysed). Quality assessment is usually conducted using checklists and quality scales. It has not yet been proven;however, that quality is related to experimental bias. Aim: Identify whether there is a relationship between internal validity and bias in software engineering experiments. Method: We built a quality scale to determine the quality of the studies, which we applied to 28 experiments included in two systematic literature reviews. We proposed an objective indicator of experimental bias, which we applied to the same 28 experiments. Finally, we analysed the correlations between the quality scores and the proposed measure of bias. Results: We failed to find a relationship between the global quality score (resulting from the quality scale) and bias; however, we did identify interesting correlations between bias and some particular aspects of internal validity measured by the instrument. Conclusions: There is an empirically provable relationship between internal validity and bias. It is feasible to apply quality assessment in systematic literature reviews, subject to limits on the internal validity aspects for consideration.

Reflectance anisotropy spectroscopy assessment of the MOVPE nucleation of GaInP on Germanium (100)

This work summarizes the observations made on the variation and time evolution of the reflectanceanisotropy signal during the MOVPE growth of GaInPnucleation layers on Germanium substrates. This in situ monitoring tool is used to assess the impact of different nucleation routines and reactor conditions on the quality of the layers grown. This comparison is carried out by establishing a correlation between reflectanceanisotropy signature at 2.1 eV and the morphology of the epilayers evaluated by atomic force microscopy (AFM). This paper outlines the potential of reflectanceanisotropy to predict, explore, and therefore optimize, the best growth conditions that lead to a high quality III–V epilayer on a Ge substrate

Mathematical models for the arrangement and the cleaning of the river basin and surroundings of the river sandy grounds to its passage by the city of Salta (Argentina)

The province of Salta is located the Northwest of Argentina in the border with Bolivia, Chile and Paraguay. Its Capital is the city of Salta that concentrates half of the inhabitants of the province and has grown to 600000 hab., from a small active Spanish town well founded in 1583. The city is crossed by the Arenales River descending from close mountains at North, source of water and end of sewers. But with actual growing it has become a focus of infection and of remarkable unhealthiness. It is necessary to undertake a plan for the recovery of the river, directed to the attainment of the well-being and to improve the life?s quality of the Community. The fundamental idea of the plan is to obtain an ordering of the river basin and an integral management of the channel and its surroundings, including the cleaning out. The improvement of the water?s quality, the healthiness of the surroundings and the improvement of the environment, must go hand by hand with the development of sport activities, of relaxation, tourism, establishment of breeding grounds, kitchen gardens, micro enterprises with clean production and other actions that contribute to their benefit by the society, that being a basic factor for their care and sustainable use. The present pollution is organic, chemical, industrial, domestic, due to the disposition of sweepings and sewer effluents that affects not only the flora and small fauna, destroying the biodiversity, but also to the health of people living in their margins. Within the plan it will be necessary to consider, besides hydric and environmental cleaning and the prevention of floods, the planning of the extraction of aggregates, the infrastructure and consolidation of margins works and the arrangement of all the river basin. It will be necessary to consider the public intervention at state, provincial and local level, and the private intervention. In the model it has been necessary to include the sub-model corresponding to the election of the entity to be the optimal instrument to reach the proposed objectives, giving an answer to the social, environmental and economic requirements. For that the authors have used multi-criteria decision methods to qualify and select alternatives, and for the programming of their implementation. In the model the authors have contemplated the short, average and long term actions. They conform a Paretooptimal alternative which secures the ordering, integral and suitable management of the basin of the Arenales River, focusing on its passage by the city of Salta.

Influence of nutritional and management practices on productive performance and egg quality of brown egg-laying hens = Influencia de factores nutricionales y de manejo sobre la productividad y calidad del huevo en gallinas ponedoras rubias

El objetivo general de esta Tesis Doctoral fue estudiar la influencia de diversos factores nutricionales y de manejo sobre la productividad y la calidad del huevo en gallinas ponedoras comerciales rubias. Los factores estudiados fueron: 1) Cereal principal y tipo de grasa en la dieta; 2) Nivel de proteína bruta y grasa en la dieta; 3) Nivel energético de la dieta; 4) Peso vivo al inicio del período de puesta. En el experimento 1, la influencia del cereal principal en la dieta y el tipo de grasa suplementada en la dieta sobre los parámetros productivos y la calidad del huevo fue estudiado en 756 gallinas rubias de la estirpe Lohmann desde la sem 22 hasta las 54 de vida. El experimento se realizó mediante un diseño completamente al azar con 9 tratamientos ordenados factorialmente, con 3 cereales bases (maíz, trigo blando y cebada) y 3 tipos de grasa que variaban en su contenido en ácido linoléico (aceite de soja, oleína vegetal mezcla y manteca). Todas las dietas satisfacian las recomendaciones nutricionales para gallinas ponedoras rubias según el NRC (1994) y FEDNA (2008). La unidad experimental fue la jaula para todas las variables. Cada tratamiento fue replicado 4 veces, y la unidad experimental estuvo formada por 21 gallinas alojadas en grupos de 7. Las dietas fueron formuladas con un contenido nutritivo similar, excepto para el ácido linoléico, que varió en función del tipo de cereal y grasa utilizado. Así, dependiendo de la combinación de estos elementos el contenido de este ácido graso varió desde un 0.8% (dieta trigo-manteca) a un 3.4% (dieta maíz-aceite de soja). Este rango de ácido linoléico permitió estimar el nivel mínimo de este nutriente en el pienso que permite maximizar el peso del huevo. Los parámetros productivos y la calidad del huevo se controlaron cada 28 días y el peso de las aves se midió individualmente al inicio y al final del experimento con el objetivo de estudiar la variación en el peso vivo de los animales. No se observaron interacciones entre el tipo de cereal y grasa en la dieta para ninguna de las variables productivas estudiadas. Los tratamientos experimentales no afectaron a las principales variables productivas (porcentaje de puesta, peso del huevo y masa de huevo). Sin embargo, la ganancia de peso fue mayor en gallinas alimentadas con maíz o trigo que las gallinas alimentadas con cebada (243 vs. 238 vs. 202 g, respectivamente; P< 0.05). En el mismo sentido, las gallinas alimentadas con manteca obtuvieron una mayor ganancia de peso que las gallinas alimentadas con aceite de soja u oleína vegetal (251 vs. 221 vs. 210 g, respectivamente; P< 0.05). En cuanto a las variables estudiadas en relación con la calidad del huevo, ninguna de las variables estudiadas se vio afectada por el tratamiento experimental, salvo la pigmentación de la yema. Así, las gallinas alimentadas con maíz como cereal principal obtuvieron una mayor puntuación en relación con la escala de color que las gallinas alimentadas con trigo y con cebada (9.0 vs. 8.3 vs. 8.3, respectivamente; P< 0.001). La pigmentación de la yema también se vio afectada por el tipo de grasa en la dieta, así, las gallinas alimentadas con manteca obtuvieron una mayor puntuación de color en relación con la escala de color que las gallinas alimentadas con aceite de soja u oleína vegetal (8.9 vs. 8.5 vs. 8.2, respectivamente; P< 0.001). La influencia del contenido en ácido linoléico respecto al peso de huevo y masa de huevo fue mayor a medida que el contenido de dicho ácido graso se redujo en la dieta. Así, la influencia de la dieta en los radios peso de huevo/g linoléico ingerido y masa de huevo/g linoléico ingerido fue significativamente mayor a medida que el contenido en dicho ácido graso disminuyo en la dieta (P< 0.001). Los resultados del ensayo indican que las gallinas ponedoras rubias no necesitan más de un 1.0% de ácido linoléico en la dieta para maximizar la producción y el tamaño del huevo. Además, se pudo concluir que los 3 cereales y las 3 grasas utilizadas pueden sustituirse en la dieta sin ningún perjuicio productivo o referente a la calidad del huevo siempre que los requerimientos de los animales sean cubiertos. En el experimento 2, la influencia del nivel de proteína bruta y el contenido de grasa de la dieta sobre los parámetros productivos y la calidad del huevo fue estudiado en 672 gallinas ponedoras rubias de la estirpe Lohmann entre las sem 22 y 50 de vida. El experimento fue conducido mediante un diseño completamente al azar con 8 tratamientos ordenados factorialmente con 4 dietas y 2 pesos vivos distintos al inicio de puesta (1592 vs. 1860g). Tres de esas dietas diferían en el contenido de proteína bruta (16.5%, 17.5% y 18.5%) y tenían un contenido en grasa añadida de 1.8%. La cuarta dieta tenía el nivel proteico más elevado (18.5%) pero fue suplementada con 3.6% de grasa añadida en vez de 1.8%. Cada tratamiento fue replicado 4 veces y la unidad experimental consistió en 21 gallinas alojadas dentro de grupos de 7 animales en 3 jaulas contiguas. Todas las dietas fueron isocalóricas (2750 kcal EMAn/kg) y cubrieron las recomendaciones en aminoácidos para gallinas ponedoras rubias (Arg, Ile, Lys, Met, Thr, Trp, TSAA y Val) según el NRC (1994) y FEDNA (2008). Los efectos de los tratamientos sobre las variables productivas y la calidad de huevo fueron estudiados cada 28 días. La dieta no afecto a ninguna de las variables productivas estudiadas a lo largo del período productivo. Sin embargo, el peso inicial origino que las gallinas pesadas consumieran más (120.6 vs. 113.9 g; P< 0.001), obtuvieran un porcentaje de puesta mayor (92.5 vs. 89.8%; P< 0.01) y un peso del huevo mayor (64.9 vs. 62.4 g; P< 0.001) que las gallinas ligeras. El peso inicial de las gallinas no afecto al IC por kg de huevo ni a la mortalidad, sin embargo, la ganancia de peso fue mayor (289 vs. 233 g; P< 0.01) y el IC por docena de huevos fue mejor (1.52 vs. 1.57; P< 0.01) en las gallinas ligeras que en las gallinas pesadas. En cuanto a la calidad del huevo, la dieta no influyó sobre ninguna de las variables estudiadas. Los resultados del ensayo muestran que las gallinas ponedoras rubias, independientemente de su peso vivo al inicio de la puesta, no necesitan una cantidad de proteína bruta superior a 16.5% para maximizar la producción, asegurando que las dietas cubren los requerimientos en AA indispensables. Asimismo, se puedo concluir que las gallinas con un peso más elevado al inicio de puesta producen más masa de huevo que las gallinas con un peso más bajo debido a que las primeras producen más cantidad de huevos y más pesados. Sin embargo, ambos grupos de peso obtuvieron el mismo IC por kg de huevo y las gallinas más livianas en peso obtuvieron un mejor IC por docena de huevo que las pesadas. En el experimento 3 la influencia de la concentración energética sobre los parámetros productivos y la calidad del huevo fue estudiada en 520 gallinas ponedoras rubias de la estirpe Hy-Line en el período 24-59 sem de vida. Se utilizaron 8 tratamientos ordenados factorialmente con 4 dietas que variaron en el contenido energético (2650, 2750, 2850 y 2950 kcal EMAn/kg) y 2 pesos vivos distintos al inicio del período de puesta (1733 vs. 1606g). Cada tratamiento fue replicado 5 veces y la unidad experimental consistió en una jaula con 13 aves. Todas las dietas se diseñaron para que tuvieran una concentración nutritiva similar por unidad energética. Las variables productivas y de calidad de huevo se estudiaron mediante controles cada 28 días desde el inicio del experimento. No se observaron interacciones entre el nivel energético y el peso inicial del ave para ninguna de las variables estudiadas. Un incremento en la concentración energética de la dieta incrementó la producción de huevos (88.8 % vs. 91.2 % vs. 92.7 % vs. 90.5 %), masa de huevo (56.1 g/d vs. 58.1 g/d vs. 58.8 g/d vs. 58.1 g/d), y eficiencia energética (5.42 vs. 5.39 vs. 5.38 vs. 5.58 kcal EMA/g huevo) de forma lineal y cuadrática (P< 0.05) y afectó significativamente a la ganancia de peso (255 g vs. 300 g vs. 325 g vs. 359 g; P<0.05) . Sin embargo, un incremento en la concentración energética provocó un descenso lineal en el consumo de los animales (115 g vs. 114 g vs. 111 g vs. 110 g; P< 0.001) y un descenso lineal y cuadrático en el IC por kg de huevo (2.05 vs. 1.96 vs. 1.89 vs. 1.89; P< 0.01). En cuanto a la calidad del huevo, un incremento en el contenido energético de la dieta provocó una reducción en la calidad del albumen de forma lineal en forma de reducción de Unidades Haugh (88.4 vs. 87.8 vs. 86.3 vs. 84.7; P< 0.001), asimismo el incremento de energía redujo de forma lineal la proporción relativa de cáscara en el huevo (9.7 vs. 9.6 vs. 9.6 vs. 9.5; P< 0.001). Sin embargo, el incremento energético propició un incremento lineal en la pigmentación de la yema del huevo (7.4 vs. 7.4 vs. 7.6 vs. 7.9; P< 0.001). El peso vivo al inicio de la prueba afecto a las variables productivas y a la calidad del huevo. Así, los huevos procedentes de gallinas pesadas al inicio de puesta tuvieron una mayor proporción de yema (25.7 % vs. 25.3 %; P< 0.001) y menor de albumen (64.7 vs. 65.0; P< 0.01) y cáscara (9.5 vs. 9.6; P< 0.05) respecto de los huevos procedentes de gallinas ligeras. Consecuentemente, el ratio yema:albumen fue mayor (0.40 vs. 0.39; P< 0.001) para las gallinas pesadas. Según los resultados del experimento se pudo concluir que las actuales gallinas ponedoras rubias responden con incrementos en la producción y en la masa del huevo a incrementos en la concentración energética hasta un límite que se sitúa en 2850 kcal EMAn/kg. Asimismo, los resultados obtenidos entre los 2 grupos de peso al inicio de puesta demostraron que las gallinas pesadas al inicio de puesta tienen un mayor consumo y producen huevos más pesados, con el consecuente aumento de la masa del huevo respecto de gallinas más ligeras. Sin embargo, el IC por kg de huevo fue el mismo en ambos grupos de gallinas y el IC por docena de huevo fue mejor en las gallinas ligeras. Asimismo, la eficiencia energética fue mejor en las gallinas ligeras. Abstract The general aim of this PhD Thesis was to study the influence of different nutritional factors and management on the productivity and egg quality of comercial Brown laying hens. The factor studied were: 1) The effect of the main cereal and type of fat of the diet; 2) The effect of crude protein and fat content of the diet; 3) The effect of energy concentration of the diet; 4) The effect of initial body weight of the hens at the onset of lay period. In experiment 1, the influence of the main cereal and type of supplemental fat in the diet on productive performance and egg quality of the eggs was studied in 756 Lohmann brown-egg laying hens from 22 to 54 wk of age. The experiment was conducted as a completely randomized design with 9 treatments arranged factorially with 3 cereals (dented corn, soft wheat, and barley) and 3 types of fat (soy oil, acidulated vegetable soapstocks, and lard). Each treatment was replicated 4 times (21 hens per replicate). All diets were formulated according to NRC (1994) and FEDNA (2008) to have similar nutrient content except for linoleic acid that ranged from 0.8 (wheat-lard diet) to 3.4% (corn-soy bean oil) depending on the combination of cereal and fat source used. This approach will allow to estimate the minimum level of linoleic acid in the diets that maximizes egg weight. Productive performance and egg quality traits were recorded every 28 d and BW of the hens was measured individually at the beginning and at the end of the experiment. No significant interactions between main factors were detected for any of the variables studied. Egg production, egg weight, and egg mass were not affected by dietary treatment. Body weight gain was higher (243 vs. 238 vs. 202 g; P<0.05) for hens fed corn or wheat than for hens fed barley and also for hens fed lard than for hens fed soy oil or acidulated vegetable soapstocks (251 vs. 221 vs. 210 g; P< 0.05). Egg quality was not influenced by dietary treatment except for yolk color that was greater (9.0 vs. 8.3 vs. 8.3; P< 0.001) for hens fed corn than for hens fed wheat or barley and for hens fed lard than for hens fed soy oil or acidulated vegetable soapstocks (8.9 vs. 8.5 vs. 8.2, respectivamente; P< 0.001). The influence of linoleic acid on egg weight and egg mass was higher when the fatty acid was reduced in the diet. Thus, the influence of the diet in egg weight/g linoleic acid intake and egg mass/g linolec acid intake was higher when the amount of this fatty acid decreased in the diet (P< 0.001). It is concluded that brown egg laying hens do not need more than 1.0% of linoleic acid in the diet (1.16 g/hen/d) to maximize egg production and egg size. The 3 cereals and the 3 fat sources tested can replace each other in the diet provided that the linoleic acid requirements to maximize egg size are met. In experiment 2, the influence of CP and fat content of the diet on performance and egg quality traits was studied in 672 Lohmann brown egg-laying hens from 22 to 50 wk of age. The experiment was conducted as a completely randomized design with 8 treatments arranged factorially with 4 diets and 2 initial BW of the hens (1,592 vs. 1,860 g). Three of these diets differed in the CP content (16.5, 17.5, and 18.5%) and included 1.8% added fat. The fourth diet had also 18.5% CP but was supplemented with 3.6% fat instead of 1.8% fat. Each treatment was replicated 4 times and the experimental unit consisted of 21 hens allocated in groups of 7 in 3 adjacent cages. All diets were isocaloric (2,750 kcal AME/kg) and met the recommendations of brown egg-laying hens for digestible Arg, Ile, Lys, Met, Thr, Trp, TSAA, and Val. Productive performance and egg quality were recorded by replicate every 28-d. For the entire experimental period, diet did not affect any of the productive performance traits studied but the heavier hens had higher ADFI (120.6 vs. 113.9g; P< 0.001), egg production (92.5 vs. 89.8%; P< 0.01), and egg weight (64.9 vs. 62.4g; P< 0.001) than the lighter hens. Initial BW did not affect feed conversion per kilogram of eggs or hen mortality but BW gain was higher (289 vs. 233g; P< 0.01) and FCR per dozen of eggs was better (1.52 vs. 1.57; P< 0.01) for the lighter than for the heavier hens. None of the egg quality variables studied was affected by dietary treatment or initial BW of the hens. It is concluded that brown egg-laying hens, irrespective of their initial BW, do not need more than 16.5% CP to maximize egg production provided that the diet meet the requirements for key indispensable amino acids. Heavier hens produce more eggs that are larger than lighter hens but feed efficiency per kilogram of eggs is not affected. In experiment 3, the influence of AMEn concentration of the diet on productive performance and egg quality traits was studied in 520 Hy-Line brown egg-laying hens differing in initial BW from 24 to 59 wks of age. There were 8 treatments arranged factorially with 4 diets varying in energy content (2,650, 2,750, 2,850, and 2,950 kcal AMEn/kg) and 2 initial BW of the hens (1,733 vs. 1,606 g). Each treatment was replicated 5 times (13 hens per replicate) and all diets had similar nutrient content per unit of energy. No interactions between energy content of the diet and initial BW of the hens were detected for any trait. An increase in energy concentration of the diet increased (linear, P< 0.05; quadratic P< 0.05) egg production (88.8 % vs. 91.2 % vs. 92.7 % vs. 90.5 %), egg mass (56.1 g/d vs. 58.1 g/d vs. 58.8 g/d vs. 58.1 g/d), energy efficiency (5.42 vs. 5.39 vs. 5.38 vs. 5.58 kcal AMEn/g of egg), and BW gain (255 g vs. 300 g vs. 325 g vs. 359 g; P<0.05) but decreased ADFI (115 g vs. 114 g vs. 111 g vs. 110 g; P< linear, P< 0.001) and FCR per kg of eggs (2.05 vs. 1.96 vs. 1.89 vs. 1.89; linear, P< 0.01; quadratic P< 0.01). An increase in energy content of the diet reduced Haugh units (88.4 vs. 87.8 vs. 86.3 vs. 84.7; P< 0.01) and the proportion of shell in the egg (9.7 vs. 9.6 vs. 9.6 vs. 9.5; P< 0.001). Feed intake (114.6 vs. 111.1 g/hen per day), AMEn intake (321 vs. 311 kcal/hen per day), egg weight (64.2 vs. 63.0 g), and egg mass (58.5 vs. 57.0 g) were higher for the heavier than for the lighter hens (P<0.01) but FCR per kg of eggs and energy efficiency were not affected. Eggs from the heavier hens had higher proportion of yolk (25.7 % vs. 25.3 %; P< 0.001) and lower of albumen (64.7 vs. 65.0; P< 0.01) and shell (9.5 vs. 9.6; P< 0.05) than eggs from the lighter hens. Consequently, the yolk to albumen ratio was higher (0.40 vs. 0.39; P< 0.001) for the heavier hens. It is concluded that brown egg-laying hens respond with increases in egg production and egg mass, to increases in AMEn concentration of the diet up to 2,850 kcal/kg. Heavy hens had higher feed intake and produced heavier eggs and more egg mass than light hens. However, energy efficiency was better for the lighter hens.

Hydrogeochemistry of surface and spring waters in the surroundings of the CO2 injection site at Hontomín–Huermeces (Burgos, Spain)

In this paper the very first geochemical and isotopic data related to surface and spring waters and dissolved gases in the area of Hontomín–Huermeces (Burgos, Spain) are presented and discussed. Hontomín–Huermeces has been selected as a pilot site for the injection of pure (>99%) CO2. Injection and monitoring wells are planned to be drilled close to 6 oil wells completed in the 1980s for which detailed stratigraphical logs are available, indicating the presence of a confined saline aquifer at the depth of about 1500 m into which less than 100,000 tons of iquid CO2 will be injected, possibly starting in 2013. The chemical and features of the spring waters suggest that they are related to a shallow hydrogeological system as the concentration of the Total Dissolved Solids approaches 800 mg/L with a Ca2+(Mg2+)-HCO3− composition, similar to that of the surface waters. This is also supported by the oxygen and hydrogen isotopic ratios that have values lying between those of the Global and the Mediterranean Meteoric Water Lines. Some spring waters close to the oil wells are haracterized by relatively high concentrations of NO3− (up to 123 mg/L), unequivocally suggesting an anthropogenic source that adds to the main water–rock interaction processes. The latter can be referred to Ca-Mg-carbonate and, at a minor extent, Al-silicate dissolution, being the outcropping sedimentary rocks characterized by Palaeozoic to Quaternary rocks. Anomalous concentrations of Cl−, SO42−, As, B and Ba were measured in two springs discharging a few hundred meters from the oil wells and in the Rio Ubierna. These contents are significantly higher than those of the whole set of the studied waters and are possibly indicative of mixing processes, although at very low extent, between deep and shallow aquifers. No evidence of deep-seated gases interacting with the Hontomín–Huermeces waters was recognized in the chemistry of the disolved gases. This is likely due to the fact that they are mainly characterized by an atmospheric source as highlighted by the high contents of N2, O2 and Ar and by N2/Ar ratios that approach that of ASW (Air Saturated Water) and possibly masking any contribution related to a deep source. Nevertheless, significant concentrations (up to 63% by vol.) of isotopically negative CO2 (<−17.7‰ V-PDB) were found in some water samples, likely related to a biogenic source. The geochemical and isotopic data of this work are of particular importance when a monitoring program will be established to verify whether CO2 leakages, induced by the injection of this greenhouse gas, may be affecting the quality of the waters in the shallow hydrological circuits at Hontomín–Huermeces. In this respect, carbonate chemistry, the isotopic carbon of dissolved CO2 and TDIC (Total Dissolved Inorganic Carbon) and selected trace elements can be considered as useful parameters to trace the migration of the injected CO2 into near-surface environments.

Flujos de gases de efecto invernadero en suelos forestales y agroforestales del centro de la Península Ibérica=Greenhouse gas flows in forest and agroforestry soils in the center of the Iberian Peninsula

Debido a la complejidad de los procesos que controlan el intercambio de gases de carbono (C) y nitrógeno (N) entre el suelo y la atmósfera, en los sistemas forestales y agroforestales, son comprensibles las incógnitas existentes respecto a la estimación de los flujos de los gases de efecto invernadero (GEI) y la capacidad como reservorios de carbono de los suelos, bajo diferentes formas de uso y regímenes de alteración a escala regional y global. Esta escasez de información justifica la necesidad de caracterizar la dinámica de intercambio de GEI en los ecosistemas Mediterráneos, en especial en el contexto actual de cambio climático, y el incremento asociado de temperatura y periodos de sequía, alteración de los patrones de precipitación, y el riesgo de incendios forestales; cuyas consecuencias afectarán tanto a los compartimentos de C y de N del suelo como a la capacidad de secuestro de C de estos ecosistemas. Dentro de este contexto se enmarca la presente tesis doctoral cuyo objetivo ha sido cuantificar y caracterizar los flujos de dióxido de carbono (CO2), de oxido nitroso (N2O) y de metano (CH4), junto con los stocks de C y N, en suelos forestales de Quercus ilex, Quercus pyrenaica y Pinus sylvestris afectados por incendios forestales; así como el estudiar el efecto de la gestión y la cubierta arbórea en la respiración del suelo y los stocks de C y N en una dehesa situada en el centro de la Península Ibérica. De manera que los flujos de CO2, N2O y CH4; y los parámetros físico-químicos y biológicos del suelo fueron estudiados en los diferentes tratamientos y ecosistemas a lo largo del trabajo que se presenta. Los resultados obtenidos muestran la existencia de variaciones temporales y espaciales de la respiración del suelo dentro de una escala geográfica pequeña, controladas principalmente por la temperatura y la humedad del suelo; y por los contenidos de C y N del suelo en un bosque de Pinus sylvestris en la vertiente norte de la Sierra de Guadarrama , en España. El análisis de los efectos de los incendios forestales a largo plazo (6-8 años) revela que las pérdidas anuales de C a través de la respiración del suelo en las zonas quemadas de Quercus ilex, Quercus pyrenaica y Pinus sylvestris fueron 450 gCm-2yr-1, 790 gCm-2yr-1 y 1220 gCm-2yr-1, respectivamente; lo que representa una reducción del 43%, 22% y 11% en comparación con las zonas no quemadas de dichas especies, debido a la destrucción de la masa arbórea. El efecto del fuego también alteró los flujos N2O y CH4 del suelo, de una forma diferente en los distintos ecosistemas y estacionalidades estudiadas. De tal modo, que los suelos quemados mostraron una mayor oxidación del CH4 en las masas de Q. ilex, y una menor oxidación en las de P. sylvestris; además de una disminución de los flujos de N2O en Q. pyrenaica. Los incendios también afectaron los parámetros microclimáticos de los suelos forestales, observándose un incremento de la temperatura del suelo y una disminución de la humedad en los emplazamientos quemados que en los no quemados. Los cationes intercambiables, el pH, el cociente C/N, el contenido en raicillas y la biomasa microbiana también disminuyeron en las zonas quemadas. Aunque el C orgánico del suelo no se alteró de manera significativa, si lo hizo la calidad de la materia orgánica, disminuyendo el carbono lábil y aumentando las formas recalcitrantes lo que se tradujo en menor sensibilidad de la respiración del suelo a la temperatura (valores de Q10) en las zonas quemadas. Los resultados del estudio realizado en la Dehesa muestran que las actividades silvopastorales estudiadas afectaron levemente y de forma no constante a la respiración del suelo y las condiciones microclimáticas del suelo. Se observó una reducción 12% de la respiración del suelo por efecto del pastoreo no intensivo. Sin embargo, se observaron incrementos de 3Mg/ha en los stocks de C y de 0.3 Mg/ha en los stocks de N en los suelos pastoreados en comparación con los no pastoreados. Aunque, no se observó un claro efecto de la labranza sobre la respiración del suelo en nuestro experimento, sin embargo si se observó una disminución de 3.5 Mg/ha en las reservas de C y de 0.3 Mg/ ha en las de N en los suelos labrados comparados con los no labrados. La copa del arbolado influyó de forma positiva tanto en la respiración del suelo, como en los stocks de C y N de los suelos. La humedad del suelo jugó un papel relevante en la sensibilidad de la respiración a la temperatura del suelo. Nuestros resultados ponen de manifiesto la sensibilidad de la respiración del suelo a cambios en la humedad y los parámetros edáficos, y sugieren que la aplicación de modelos estándar para estimar la respiración del suelo en áreas geográficas pequeñas puede no ser adecuada a menos que otros factores sean considerados en combinación con la temperatura del suelo. Además, las diferentes respuestas de los flujos de gases de efecto invernadero a los cambios, años después de la ocurrencia de incendios forestales, destaca la necesidad de incluir estos cambios en las futuras investigaciones de la dinámica del carbono en los ecosistemas mediterráneos. Por otra parte, las respuestas divergentes en los valores de respiración del suelo y en los contenidos de C y N del suelo observados en la dehesa, además de la contribución de la copa de los árboles en los nutrientes del suelo ilustran la importancia de mantener la gestión tradicional aplicada en beneficio de la capacidad de almacenar C en la dehesa estudiada. La información obtenida en este trabajo pretende contribuir a la mejora del conocimiento de la dinámica y el balance de C en los sistemas mediterráneos, además de ayudar a predecir el impacto del cambio climático en el intercambio de C entre los ecosistemas forestales y agroforestales y la atmósfera. ABSTRACT Due to the complexity of the processes that control the exchange of carbon (C) and nitrogen (N) gasses between soils and the atmosphere in forest and agroforestry ecosystems, understandable uncertainties exist as regards the estimation of greenhouse gas (GHG) fluxes and the soil sink capacity at regional and global scale under different forms of land use and disturbance regimes. These uncertainties justify the need to characterize the exchange dynamics of GHG between the atmosphere and soils in Mediterranean terrestrial ecosystems, particularly in the current context of climate change and the associated increase in temperature, drought periods, heavy rainfall events, and increased risk of wildfires, which affect not only the C and N pools but also the soil C sink capacity of these ecosystems. Within this context, the aims of the present thesis were, firstly, to quantify and characterize the fluxes of carbon dioxide (CO2), nitrous oxide (N2O) and methane (CH4) as well as the C and N stocks in Quercus ilex, Quercus pyrenaica and Pinus sylvestris stands affected by wildfires, and secondly, to study the effects of Quercus ilex canopy and management on both soil respiration and C and N pools in dehesa systems in the center of Iberian Peninsula. Soil CO2, N2O and CH4 fluxes, and soil physical-chemical and biological parameters were studied under the different treatments and ecosystems considered in this study. The results showed seasonal and spatial variations in soil respiration within small geographic areas, mainly controlled by soil temperature and moisture in addition to soil carbon and nitrogen stocks in mixed pine–oak forest ecosystems on the north facing slopes of the Sierra de Guadarrama in Spain. The analysis of long term effects of wildfires (6–8 years) revealed that annual carbon losses through soil respiration from burned sites in Quercus ilex, Quercus pyrenaica and Pinus sylvestris stands were 450 gCm-2yr-1, 790 gCm-2yr-1 and 1220 gCm-2yr-1, respectively; with burned sites emitting 43%, 22% and 11% less in burned as opposed to non-burned sites due the loss of trees. Fire may alter both N2O and CH4 fluxes although the magnitude of such variation depends on the site, soil characteristics and seasonal climatic conditions. The burned sites showed higher CH4 oxidation in Q.ilex stands, and lower oxidation rates in P. sylvestris stands. A reduction in N2O fluxes in Q. pyrenaica stands was detected at burned sites along with changes in soil microclimate; higher soil temperature and lower soil moisture content. Exchangeable cations, the C/N ratio, pH, fine root and microbial biomass were also found to decrease at burned sites. Although the soil organic carbon was not significantly altered, the quality of the organic matter changed, displaying a decrease in labile carbon and a relative increase in refractory forms, leading to lower sensitivity of soil respiration to temperature (Q10 values) at burned sites. The results from the dehesa study show that light grazing and superficial tilling practices used in the studied dehesa system in Spain had a slight but non-consistent impact on soil respiration and soil microclimate over the study period. The reduction in soil respiration in the dehesa system due to the effects of grazing was around 12 %. However, increments of 3Mg/ha in C stocks and 0.3 Mg/ha in N stocks in grazed soils were observed. Although no clear effect of tilling on soil respiration was found, a decrease of 3.5 Mg/ha in C stocks and 0.3 Mg/ha in N stocks was detected for tilled soils. The presence of a tree canopy induced increases in soil respiration, soil C and N stocks, while soil moisture was found to play an important role in soil respiration temperature response. Our results suggest that the use of standard models to estimate soil respiration in small geographical areas may not be adequate unless other factors are considered in addition to soil temperature. Furthermore, the different responses of GHG flux to climatic shifts, many years after the occurrence of wildfire, highlight the need to include these shifts in C dynamics in future research undertaken in Mediterranean ecosystems. Furthermore, divergent responses in soil respiration and soil C and N stocks to grazing or tilling practices in Dehesa systems, and the influence of tree canopy on soil respiration and soil nutrient content, illustrate the importance of maintaining beneficial management practices. Moreover, the carbon sequestration capacity of the Dehesa system studied may be enhanced through improvements in the management applied. It is hoped that the information obtained through this research will contribute towards improving our understanding of the dynamics and balance of C in Mediterranean systems, and help predict the impact of climate change on the exchange of C between forest and agroforestry ecosystems and the atmosphere.

Lagrangian tools and the assessment of the predictive capacity of geophysical data sets

We examine, with recently developed Lagrangian tools, altimeter data and numerical simulations obtained from the HYCOM model in the Gulf of Mexico. Our data correspond to the months just after the Deepwater Horizon oil spill in the year 2010. Our Lagrangian analysis provides a skeleton that allows the interpretation of transport routes over the ocean surface. The transport routes are further verified by the simultaneous study of the evolution of several drifters launched during those months in the Gulf of Mexico. We find that there exist Lagrangian structures that justify the dynamics of the drifters, although the agreement depends on the quality of the data. We discuss the impact of the Lagrangian tools on the assessment of the predictive capacity of these data sets.

Acoustic study of the Compañía de Jesús church. Characterization by means of objective and subjective parameters

This work shows the objective results of the acoustic quality of the Compañia de Jesús Church in Cordoba, Argentina. The acoustics of this Temple, built by the Orden Jesuita (Jesuit Order) two centuries ago and declared a World Heritage Site by UNESCO in 2000, is currently considered optimal by musicians as well as general public. In the second half of XVI century, with the Catholic reform, the need for improved speech intelligibility was given priority, being the Jesuit one of the orders that gave most importance to the construction of their temples. This church has constructive and spatial characteristics consistent with those needs. With the purpose of carrying out the acoustic assessment of the precincts, a work methodology that allowed comparing the results obtained from objective measures was developed by means of implementation of field measurements and space modeling, with subjective appreciation results, by developing surveys, with the aim of characterizing acoustically the sound space. This paper shows the comparison between the subjective results and objective criteria, which allowed important conclusions on the acoustic behavior of the temple to be obtained. In this way interesting data were obtained in relation to the subjective response of the acoustics of the church.

Análisis cualitativo de la relación entrenador-deportista en etapas de formación en baloncesto = Qualitative analysis of the coach-athlete relationship in youth basketball

La relación entrenador-deportista estudia, dentro del ámbito de la psicología social en el deporte, la interacción de los comportamientos, sentimientos y emociones de ambos miembros de la pareja. Se entiende como un proceso en el que antecedentes como la edad, el género o las características esperadas en el otro condicionan el desarrollo de diferentes componentes, los cuales determinan la calidad de la relación, obteniéndose diferentes resultados tanto a nivel deportivo como personal. En la presente tesis se han estudiado 12 relaciones positivas entrenador-deportista en categorías de formación en baloncesto con el objetivo de conocer los condicionantes, componentes, estrategias y resultados de relaciones efectivas. Para ello, se ha realizado un estudio cualitativo, cuya muestra (N=24) se ha seleccionado de manera deliberada discriminando variables como el nivel deportivo del equipo, las características del entrenador, la duración y la calidad de la relación. Las 12 díadas participaban en el máximo nivel de su categoría, tenían una duración mínima de dos temporadas y fueron calificadas como positivas por los entrenadores principales. La investigación se ha llevado a cabo desde la perspectiva holística del fenómeno, teniendo en cuenta tanto el punto de vista del entrenador como el del jugador. Para la recogida de datos se utilizó la entrevista semiestructurada y en profundidad. Los resultados señalan la necesidad de desarrollar estrategias que promuevan y mantengan relaciones de calidad en baloncesto, ya que éstas tienen un alto impacto en el progreso deportivo y personal de los jugadores jóvenes en baloncesto. Entre los condicionantes de la relación entrenador-deportista se ha percibido que las expectativas formadas en los primeros contactos pueden determinar la calidad de la relación. Por otro lado, los componentes dan lugar a resultados como el crecimiento a nivel personal por parte de los jugadores o un mayor rendimiento deportivo, producido en gran medida por la satisfacción y el bienestar psicológico tanto del entrenador como del jugador. Por último, los resultados indican la importancia de adecuar el comportamiento del entrenador a las características propias de los jugadores en cada categoría de formación. ABSTRACT The coach-athlete relationship studies, within the field of social psychology in sport, the interaction of behavior, feelings and emotions in both partners. It is understood as a process in which antecedents such as age, gender or expectations develop different components. The quality of the relationship is determined by these three elements, leading to different results in sport performance as in personal variables. This thesis examined 12 positive coach-athlete rapports in youth basketball teams in order to better understand the determinants, components, strategies and outcomes of effective relationships. A qualitative study has been carried out. The sample (N = 24) is selected deliberately discriminating variables such as the team’s sportive level, coach characteristics, duration and quality of the relationship. Twelve dyads participated at the highest level in its category, had a minimum of two seasons and were rated as positive by head coaches. The research was conducted from a holistic perspective of the phenomenon, taking into account the point of view of both the coach and the player. Indepth semi-structured interview was used for data collection. The results report the need to develop strategies to promote and maintain high quality relationships in basketball, because they have an important impact in sport and personal development of young basketball players. Expectations raised through different impression cues in the first contacts can determine the quality of the relationship. On the other hand, the components lead to results such as players’ personal growth or sport performance, largely produced by the satisfaction and psychological well being of both the coach and the player. Finally, the results indicate the importance of adapting the coach’s behavior to the characteristics of the different stages of young athletes’ development.

Influence of castration on growth performance and carcass and meat quality of heavy female pigs

The main objetive of this Doctoral Thesis was to study the influence of female castration and pig sex on growth performance and carcass and meat quality of white pigs slaughtered at different final weights. Three experiments (Exp.) were conducted. In Exp. 1, a total of 200 (Landrace * Large White dam x Pietrain * Large White sire) gilts of 50 ± 3 days of age (23.3 ± 1.47 kg BW) was used to investigate the effects of castration (intact females, IF vs. castrated feamles, CF) and slaughter weight (106 vs. 122 kg BW) on productive performance and carcass and meat quality. There were four experimental treatments arranged as a 2 x 2 factorial and 5 replicates of 10 pigs each per treatment. Half of the gilts were ovariectomized at 58 d of age (8 days after the beginning of the trial; 29.8 ± 1.64 kg BW) whereas the other half remained intact. Meat samples were taken at m. Longissimus thoracis at the level of the last rib and subcutaneous fat samples were taken at the tail insertion. For the entire experiment period, CF had higher BW gain (P<0.05) and backfat and m. Gluteus medius (GM) fat thickness (P<0.001) than IF. However, IF had higher loin and trimmed primal cut yields (P<0.05) than CF. Meat quality was similar for IF and CF but the proportion of linoleic acid in subcutaneous fat was higher (P<0.001) for IF. Pigs slaughtered at 122 kg BW had higher (P<0.001) feed intake and poorer feed efficiency than pigs slaughtered at 106 kg BW. An increase in slaughter weight (SW) improved (P<0.001) carcass yield but decreased (P<0.05) trimmed primal cut yield. Meat from females slaughtered at the heavier BW was redder (a*; P<0.001) and had more (P<0.01) intramuscular fat and less thawing (P<0.05) and cooking (P<0.10) loss than meat from females slaughtered at the lighter BW. Also, females slaughtered at 122 kg BW had less (P<0.01) linoleic acid content in the subcutaneous fat than pigs slaughtered at 106 kg BW. Castration of gilts and slaughtering at heavier BW might be useful practices for the production of heavy pigs destined to the dry cured industry in which a certain amount of fat in the carcass is required. In contrast, when the carcasses are destined to fresh meat production, IF slaughtered at 106 kg BW are a more efficient alternative. In Exp. 2, crossbred pigs (n=240) from Pietrain*Large White sires mated to Landrace*Large White dams with an average of 100 d of age (60.5 ± 2.3 kg) were used to investigate the effects of gender and slaughter weight (SW) on growth performance and carcass and meat quality characteristics. There were 6 treatments arranged factorially with 3 genders (IF vs. CF vs.castrated males, CM) and 2 SW (114 vs. 122 kg BW). Each of the 6 combinations of treatments was replicated 4 times and the experimental unit was a pen with 10 pigs. Castrated males and CF ate more feed, grew faster and had more carcass backfat depth and fat thickness at the GM muscle, but lower loin yield than IF (P<0.05). In addition, CF and CM had more intramuscular fat (P<0.05) and less linoleic acid content in the subcutaneous fat (P<0.01) than IF. Pigs slaughtered at 122 kg BW had lower ADG (P<0.05), poor gain-to-feed ratio (P<0.05), and more GM fat than pigs slaughtered at 114 kg BW (P < 0.05). It is concluded that CF and CM had similar productive performance and meat quality characteristics when slaughtered at the same age, and that the castration of females improved daily gains and increased weight and fat content of primal cuts with respect to IF. Therefore, castration of females is recommended in pigs destined to the dry-cured industry because of the beneficial effects on the quality of the primal cuts. In Exp. 3, the effects of gender and castration of females (IF vs. CF vs. CM) on performance and carcass and meat quality were studied in crossbred pigs (Landrace x Large White dams x Duroc sires) slaughtered at 119.2 (trial 1) or 131.6 (trial 2) kg BW. Intact females had better feed conversion and less carcass fat than CF and CM. Trimmed shoulder yield was higher for CM than for CF with IF being intermediate. Primal cut yield and meat quality, however were similar for all treatments. Proportion of linoleic acid in backfat was lower for CF than for IF or CM, and the differences were significant in pigs slaughtered witn 131.6 kg BW. The higher fat content and the fatty acid profile favour the use of CF and CM over IF for the production of heavy pigs destined to the dry-cured industry.