A supervised cooperative learning system for early detection of language disorders

The Quality of Life of a person may depend on early attention to his neurodevel-opment disorders in childhood. Identification of language disorders under the age of six years old can speed up required diagnosis and/or treatment processes. This paper details the enhancement of a Clinical Decision Support System (CDSS) aimed to assist pediatricians and language therapists at early identification and re-ferral of language disorders. The system helps to fine tune the Knowledge Base of Language Delays (KBLD) that was already developed and validated in clinical routine with 146 children. Medical experts supported the construction of Gades CDSS by getting scientific consensus from literature and fifteen years of regis-tered use cases of children with language disorders. The current research focuses on an innovative cooperative model that allows the evolution of the KBLD of Gades through the supervised evaluation of the CDSS learnings with experts¿ feedback. The deployment of the resulting system is being assessed under a mul-tidisciplinary team of seven experts from the fields of speech therapist, neonatol-ogy, pediatrics, and neurology.

El Vídeo Didáctico como soporte para un b-learning sostenible

En este artículo se describe una experiencia de innovación educativa realizada en el marco de la titulación de Sistemas de Telecomunicación de la EUITT de la Universidad Politécnica de Madrid, en la que se ha intentado graduar la dificultad de acceso de los alumnos al uso de ciertos laboratorios altamente tecnificados, por medio de instrumentos pedagógicos basados en el uso de tecnologías de la información y las comunicaciones. Se presenta, por tanto, un escenario propicio para la aplicación de una metodología educativa de formación combinada o blended-learning que potencie el proceso de aprendizaje de los estudiantes así como la optimización del uso de los costosos recursos materiales puestos a su disposición.

Virtual Learning Environments In Faculties Of Education In Spain: Changes On Student Attitude

This paper presents some results of a R+D project entitled “e-Learning system for Practical Training of University students in Education Faculties (ForELearn)”, developed in Spain by the Universidad de Granada and the Universidad Politécnica de Madrid and funded by the Spanish Ministry of Education. In a first phase, through the use of AulaWeb Learning Management System, a set of adaptations and improvements of this software application have been done for the design and development of an experimental course of Practicum supervision. Next, the implementation of this course by means of a group of face to face and online seminars provides experimental data for the analysis and discussion about the point of view of users (preservice teachers) that have tracked their practice supervision with AulaWeb.

Project based learning activities as a means of adapting conventional curricula to the demands of the 21st century aeronautical engineer: The design and building of the EYEFLY 1.

In this paper we report the process of designing and building the EYEFLY 1, a real UAS platform which has just performed its maiden flight. For the development of this aircraft, 30 groups of students from successive years at the Escuela Universitaria de Ingeniería Técnica Aeronáutica (EUITA) of the Universidad Politécnica de Madrid (UPM) carried out their compulsory End of Degree Project as a coordinated Project Based learning activity. Our conclusions clearly indicate that Project Based Learning activities can provide a valid complement to more conventional, theoretically-based, teaching methods. The combination of both approaches will allow us to maintain traditional but well-tested methods for providing our students with a sound knowledge of fundamental engineering disciplines and, at the same time, to introduce our students to exciting and relevant engineering situations and sceneries where social and business skills, such as communication skills, team-working or decision-taking, can be put into practice.

Instrumentation for accelerated life tests of concentrator solar cells

Concentrator photovoltaic is an emergent technology that may be a good economical and efficient alternative for the generation of electricity at a competitive cost. However, the reliability of these new solar cells and systems is still an open issue due to the high-irradiation level they are subjected to as well as the electrical and thermal stresses that they are expected to endure. To evaluate the reliability in a short period of time, accelerated aging tests are essential. Thermal aging tests for concentrator photovoltaic solar cells and systems under illumination are not available because no technical solution to the problem of reaching the working concentration inside a climatic chamber has been available. This work presents an automatic instrumentation system that overcomes the aforementioned limitation. Working conditions have been simulated by forward biasing the solar cells to the current they would handle at the working concentration (in this case, 700 and 1050 times the irradiance at one standard sun). The instrumentation system has been deployed for more than 10 000 h in a thermal aging test for III-V concentrator solar cells, in which the generated power evolution at different temperatures has been monitored. As a result of this test, the acceleration factor has been calculated, thus allowing for the degradation evolution at any temperature in addition to normal working conditions to be obtained.

Learning Analytics and Interactions in Virtual Learning Environments. A Comparative Study of Typologies and their Relationship with Academic Performance

Analysis of learning data (learning analytics) is a new research field with high growth potential. The main objective of Learning analytics is the analysis of data (interactions being the basic data unit) generated in virtual learning environments, in order to maximize the outcomes of the learning process; however, a consensus has not been reached yet on which interactions must be measured and what is their influence on learning outcomes. This research is grounded on the study of e-learning interaction typologies and their relationship with students? academic performance, by means of a comparative study between different interaction typologies (based on the agents involved, frequency of use and participation mode). The main conclusions are a) that classifications based on agents offer a better explanation of academic performance; and b) that each of the three typologies are able to explain academic performance in terms of some of their components (student-teacher and student-student interactions, evaluating students interactions and active interactions, respectively), with the other components being nonrelevant.

Predicting academic performance with learning analytics in virtual learning environments: A comparative study of three interaction classifications

Learning analytics is the analysis of static and dynamic data extracted from virtual learning environments, in order to understand and optimize the learning process. Generally, this dynamic data is generated by the interactions which take place in the virtual learning environment. At the present time, many implementations for grouping of data have been proposed, but there is no consensus yet on which interactions and groups must be measured and analyzed. There is also no agreement on what is the influence of these interactions, if any, on learning outcomes, academic performance or student success. This study presents three different extant interaction typologies in e-learning and analyzes the relation of their components with students? academic performance. The three different classifications are based on the agents involved in the learning process, the frequency of use and the participation mode, respectively. The main findings from the research are: a) that agent-based classifications offer a better explanation of student academic performance; b) that at least one component in each typology predicts academic performance; and c) that student-teacher and student-student, evaluating students, and active interactions, respectively, have a significant impact on academic performance, while the other interaction types are not significantly related to academic performance.

Sludge treatment system in the city of Wukro (Ethiopia).

This cooperation project aims to improve the sanitation facilities of the city of Wukro (located in the Tigray Region, northern Ethiopia), particularly the management of latrine wastes, by designing a sludge treatment plant in the city. It is framed within the Final Project Department of the E.T.S.I. de Caminos, Canales y Puertos, in collaboration with Wukro’s St. Mary’s College and the Mission of Ángel Olaran, that are part of the Ethiopian Catholic Church Diocese of Adigrat (ECCA). The present city, of about 42,000 inhabitants, was founded by the Italians in 1936. Due to its geographic location, which makes the city suitable for industrial and agricultural activities, Wukro is becoming an important administrative and economic center in the region, with a fast growing population.

An interactive web-based learning assistant for structural analysis of continuous beams

There are significant levels of concern about the relevance and the difficulty of learning some issues on Strength of Materials and Structural Analysis. Most students of Continuum Mechanics and Structural Analysis in Civil Engineering usually point out some key learning aspects as especially difficult for acquiring specific skills. These key concepts entail comprehension difficulties but ease access and applicability to structural analysis in more advanced subjects. Likewise, some elusive but basic structural concepts, such as flexibility, stiffness or influence lines, are paramount for developing further skills required for advanced structural design: tall buildings, arch-type structures as well as bridges. As new curricular itineraries are currently being implemented, it appears appropriate to devise a repository of interactive web-based applications for training in those basic concepts. That will hopefully train the student to understand the complexity of such concepts, to develop intuitive knowledge on actual structural response and to improve their preparation for exams. In this work, a web-based learning assistant system for influence lines on continuous beams is presented. It consists of a collection of interactive user-friendly applications accessible via Web. It is performed in both Spanish and English languages. Rather than a “black box” system, the procedure involves open interaction with the student, who can simulate and virtually envisage the structural response. Thus, the student is enabled to set the geometric, topologic and mechanic layout of a continuous beam and to change or shift the loading and the support conditions. Simultaneously, the changes in the beam response prompt on the screen, so that the effects of the several issues involved in structural analysis become apparent. The system is performed through a set of web pages which encompasses interactive exercises and problems, written in JavaScript under JQuery and DyGraphs frameworks, given that their efficiency and graphic capabilities are renowned. Students can freely boost their self-study on this subject in order to face their exams more confidently. Besides, this collection is expected to be added to the "Virtual Lab of Continuum Mechanics" of the UPM, launched in 2013 (http://serviciosgate.upm.es/laboratoriosvirtuales/laboratorios/medios-continuos-en-construcci%C3%B3n)

Técnicas de Gamification para entregas de trabajos online: comprobaciones de la fase de análisis de la compilación

Este Trabajo de Fin de Grado (TFG) tiene el objetivo de aportar un sistema de enseñanza innovador, un sistema de enseñanza mediante el cual se consiga involucrar a los alumnos en tareas y prácticas en las que se adquieran conocimientos a la vez que se siente un ambiente de juego, es decir, que se consiga aprender de forma divertida. Está destinado al sistema educativo de la Escuela Técnica Superior de Ingenieros Informáticos de la Universidad Politécnica de Madrid, en concreto a las asignaturas relacionadas con los Procesadores de Lenguajes. La aplicación desarrollada en este trabajo está destinada tanto a los profesores de las asignaturas de Procesadores de Lenguajes como a los alumnos que tengan alguna relación con esas asignaturas, consiguiendo mayor interacción y diversión a la hora de realizar la tareas y prácticas de las asignaturas. Para los dos tipos de usuarios descritos anteriormente, la aplicación está configurada para que puedan identificarse mediante sus credenciales, comprobándose si los datos introducidos son correctos, y así poder acceder al sistema. Dependiendo de qué tipo de usuario se identifique, tendrá unas opciones u otras dentro del sistema. Los profesores podrán dar de alta, ver, modificar o dar de baja las configuraciones para los analizadores de los lenguajes correspondientes a las diferentes asignaturas que están configurados previamente en el sistema. Además, los profesores pueden dar de alta, ver, modificar o dar de baja los fragmentos de código que formarán los ficheros correspondientes a las plantillas de pruebas del analizador léxico que se les ofrece a los alumnos para realizar comprobaciones de las prácticas. Mediante la aplicación podrán establecer diferentes características y propiedades de los fragmentos que incorporen al sistema. Por otra parte, los alumnos podrán realizar la configuración del lenguaje, definido por los profesores, para la parte del analizador léxico de las prácticas. Esta configuración será guardada para el grupo al que corresponde el alumno, pudiendo realizar modificaciones cualquier miembro del grupo. De esta manera, se podrán posteriormente establecer las relaciones necesarias entre los elementos del lenguaje según la configuración de los profesores y los elementos referentes a las prácticas de los alumnos.Además, los alumnos podrán realizar comprobaciones de la parte léxica de sus prácticas mediante los ficheros que se generan por el sistema en función de sus opciones de práctica y los fragmentos añadidos por los profesores. De esta manera, se informará a los alumnos del éxito de las pruebas o bien de los fallos ocasionados con sus resultados, bien por el formato del archivo subido como resultado de la prueba o bien por el contenido incorrecto de este mismo. Todas las funciones que ofrece esta aplicación son completamente on-line y tendrán una interfaz llamativa y divertida, además de caracterizarse por su facilidad de uso y su comodidad. En el trabajo realizado para este proyecto se cumplen tanto las Pautas de Accesibilidad para Contenidos Web (WCAG 2.0), así como las propiedades de un código HTML 5 y CSS 3 de manera correcta, para así conseguir que los usuarios utilicen una aplicación fácil, cómoda y atractiva.---ABSTRACT---This Final Year Project (TFG) aims to contribute the educational system of the School of Computer Engineering at the Polytechnic University of Madrid, especially in subjects related with Language Processors. This project is an interactive learning system whose goal is to learn in an amusing environment. To realize this target, the system involves students, using environments of games in tasks and practices. The application developed in this project is designed for both professors of the subjects of Language Processors and students who have some relation to these subjects. This perspective achieve more interaction and a funny environment during the subject‘s tasks. The application is configured in order to the users can be identified by their credentials, checking whether the identification data are correct to have access to the system. According on what type of user is identified, they will have different options within the system. Professors will be able to register, modify or delete settings for the scanner of languages for all the subjects preconfigured in the system. Additionally, professors can register, show, modify or remove the code of the templates from scanner tests that are offered to students for testing the practical exercises. The professors may provide also different characteristics and properties of fragments incorporated in the system. Moreover, students can make the configuration of languages, getting in the systems by the administrators, for the scanner module of their practical exercises. This configuration will be saved for the group of the student. This model can also be changed by any group member. The system permits also establish later the relationships between the elements of language fixes by professors and elements developed by the students. Students could check the lexical part of their practical exercises through files that are created according to their practical options and the fragments added by professors. Thus students will be informed of success or failure in the uploaded files format and in the content of them. All functions provide by this application are completely on-line and will have a striking and funny interface, also characterized by its ease of use and comfort.The work reaches both the Web Content Accessibility Guidelines (WCAG 2.0), and the properties of an HTML 5 and CSS 3 code correctly, in order to get the users to get an easy, convenient application and attractive.

Estudio experimental del Sistema de Albañilería Integral en la construcción de viviendas sismorresistentes. Experimental study of the Integral Masonry System in the construction of earthquake resistant houses

This paper presents the application of the Integral Masonry System (IMS) to the construction of earthquake resistant houses and its experimental study. To verify the security of this new type of building in seismic areas of the third world two prototypes have been tested, one with adobe and the other with hollow brick. In both cases it’s a two-story 6x6x6 m3 house built to scale 1/2. The tests are carried out at the Laboratory of Antiseismic Structures of the Department of Engineering, Pontifical Catholic University of Peru in Lima, in collaboration with the UPM (Technical University of Madrid). This article shows the design process of the prototypes to test, including the sizing of the reinforcements, the characteristics of the tests and the results obtained. These results show that the IMS with adobe or brick remains stable with no significant cracks faced with a severe earthquake, with an estimated acceleration of 1.8 g. Este artículo presenta una aplicación del Sistema de Albañilería Integral (SAI) a la construcción de viviendas sismorresistentes y su estudio experimental. Para verificar su seguridad para su construcción en zonas sísmicas del tercer mundo se han ensayado dos prototipos, uno con adobe, y otro con ladrillo hueco. Se trata de una vivienda de 6x6x6 m3 y dos plantas que se construyen a escala 1/2. Los ensayos se realizaron en el Laboratorio de Estructuras Antisísmicas del Departamento de Ingeniería de la Pontificia Católica Universidad del Perú (PUCP) de Lima en colaboración con la UPM (Universidad Politécnica de Madrid). Este artículo muestra el proceso de diseño de los prototipos a ensayar, incluido el dimensionado de los refuerzos, las características de los ensayos y los resultados obtenidos. Estos resultados muestran que el SAI con adobe o ladrillo permanece estable sin grietas significativas ante un sismo severo, con una aceleración estimada de 1,8 g.

A Multi-Agent System for the Solution of Fuzzy Incidents in Telecommunications

This article presents a multi-agent expert system (SMAF) , that allows the input of incidents which occur in different elements of the telecommunications area. SMAF interacts with experts and general users, and each agent with all the agents? community, recording the incidents and their solutions in a knowledge base, without the analysis of their causes. The incidents are expressed using keywords taken from natural language (originally Spanish) and their main concepts are recorded with their severities as the users express them. Then, there is a search of the best solution for each incident, being helped by a human operator using a distancenotions between them.

Evaluation of a User-Adapted Spoken Language Dialogue System: Measuring the Relevance of the Contextual Information Sources

We present an evaluation of a spoken language dialogue system with a module for the management of userrelated information, stored as user preferences and privileges. The flexibility of our dialogue management approach, based on Bayesian Networks (BN), together with a contextual information module, which performs different strategies for handling such information, allows us to include user information as a new level into the Context Manager hierarchy. We propose a set of objective and subjective metrics to measure the relevance of the different contextual information sources. The analysis of our evaluation scenarios shows that the relevance of the short-term information (i.e. the system status) remains pretty stable throughout the dialogue, whereas the dialogue history and the user profile (i.e. the middle-term and the long-term information, respectively) play a complementary role, evolving their usefulness as the dialogue evolves.

Improvement of Mechanical Properties and Life Extension of High Reliability Structural Components by Laser Shock Processing

Profiting by the increasing availability of laser sources delivering intensities above 109 W/cm2 with pulse energies in the range of several Joules and pulse widths in the range of nanoseconds, laser shock processing (LSP) is being consolidating as an effective technology for the improvement of surface mechanical and corrosion resistance properties of metals and is being developed as a practical process amenable to production engineering. The main acknowledged advantage of the laser shock processing technique consists on its capability of inducing a relatively deep compression residual stresses field into metallic alloy pieces allowing an improved mechanical behaviour, explicitly, the life improvement of the treated specimens against wear, crack growth and stress corrosion cracking. Following a short description of the theoretical/computational and experimental methods developed by the authors for the predictive assessment and experimental implementation of LSP treatments, experimental results on the residual stress profiles and associated surface properties modification successfully reached in typical materials (specifically Al and Ti alloys) under different LSP irradiation conditions are presented. In particular, the analysis of the residual stress profiles obtained under different irradiation parameters and the evaluation of the corresponding induced surface properties as roughness and wear resistance are presented.

Effect of hen age, egg weight and storage system on physical properties of egg from white-egg laying hens

A total of 72 eggs from a group of 100 white laying hens housed in standard cages were analyzed. Thirty-six eggs were retired when the hens had 44 week of age and the other 36 eggs were retired eight weeks afterwards. Each group of 36 eggs was radomly divided in three groups of 12 eggs. First group was analyzed at once (storage system C); second one was kept during one week in the refrigerator (5ºC) (storage system R), and third group were kept also one week but on ambient temperature (25ºC) (storage system ET). The hen age, egg weight and storage system had not significant (P>0.05) effect on shell thickness. The specific gravity (SG) has a positive relation with shell quality. The egg class and storage system significantly (P<0,05) affected to SG, while no influence of bird age on this variable was observed. The yolk color increased with hen age but storage system had not effect on this variable. The increase of the hen age and the R and AT storage systems significantly (P<0.05) reduced albumen height (H) and the interaction hen age x storage system was significant (P<0.025) for this variable. The reduction of the H due to R and ET storage systems was higher in the eggs from hens with 52 weeks of age than in those from hens with 44 weeks of age. The Haugh units (HU) was significantly (P<0.05) affected by hen age, egg class and storage system. The hen age increase reduced HU and the R and ET eggs had lower HU than C eggs. It is concluded that the bird age and storage system with high temperatures reduced the egg quality.