Advances in the SMS design method for imaging optics

In this work, two SMS algorithms are presented for an objective design with different selected ray-bundles: three meridian ray-bundles (3M) and one meridian and two skew ray-bundles (1M-2S), the latter from pin hole point of view, provides a better sampling of the phase space. Results obtained with different algorithms will be compared.

Progress in the SMS design method for imaging optics

In this work, two SMS algorithms are presented for an objective design with different selected ray-bundles: three meridian ray-bundles (3M) and one meridian and two skew ray-bundles (1M-2S), the latter from pin hole point of view, provides a better sampling of the phase space. Results obtained with different algorithms will be compared

Mapa preliminar de períodos predominantes del suelo en Puerto Príncipe (Haití) a partir de medidas de ruido ambiental.

The 2010 Haiti earthquake, occurred on January 12th at 16:53:09 local time (21:53:09 UTC) with epicentral distance of 15 km from the capital Port au Prince, MW 7.0 and 13 km hypocenter deep, was the strongest event in the area since happened in 1770. The maximum macroseismic intensity was estimated as X (MMI scale). The aim of this research is to obtain a preliminary zonation of Port-au-Prince in terms of predominant resonance periods of ground. A total of 36 short-period ambient noise records have been carried out on a grid of about 500x500m. H/V spectral ratio method (HVSR) has been applied to determine the predominant period at each point. The lowest values (<0.2s) predominate in the southern part of the city, composed by Miocene conglomerates, while highest values (> 0.45s) correspond to the center and western parts, composed of Pleistocene-Holocene alluvial deposits and anthropogenic land reclaimed from the sea. We have determined the ground VS30 structure inside National Palace garden, using simultaneous ambient noise measurements. An array made up of 6 sensors were used, with 5 of them uniformly distributed along a circumference and a sixth one placed in its centre. The records were analyzed by using the spatial autocorrelation method (SPAC). The VS 30 value obtained was 331m/sec, in good agreement with the average values obtained for this area by other authors, using prospecting techniques.

An evaluation of seismic hazard in La Hispaniola, after the 2010 Haiti earthquake

An evaluation of the seismic hazard in La Hispaniola Island has been carried out, as part of the cooperative project SISMO-HAITI, supported by the Technical University of Madrid (UPM) and developed by several Spanish Universities, the National Observatory of Environment and Vulnerability) ONEV of Haiti, and with contributions from the Puerto Rico Seismic Network (PRSN) and University Seismological Institute of Dominican Republic (ISU). The study was aimed at obtaining results suitable for seismic design purposes. It started with the elaboration of a seismic catalogue for the Hispaniola Island, requiring an exhaustive revision of data reported by more than 20 seismic agencies, apart from these from the PRSN and ISU. The final catalogue contains 96 historical earthquakes and 1690 instrumental events, and it was homogenized to moment magnitude, Mw. Seismotectonic models proposed for the region were revised and a new regional zonation was proposed, taking into account geological andtectonic data, seismicity, focal mechanisms, and GPS observations. In parallel, attenuation models for subduction and crustal zones were revised in previous projects and the most suitable for the Caribbean plate were selected. Then, a seismic hazard analysis was developed in terms of peak ground acceleration, PGA, and spectral accelerations, SA (T), for periods of 0.1, 0.2, 0.5, 1 and 2s, using the Probabilistic Seismic Hazard Assessment (PSHA) methodology. As a result, different hazard maps were obtained for the quoted parameters, together with Uniform Hazard Spectra for Port au Prince and the main cities in the country. Hazard deaggregation was also carried out in these towns, for the target motion given by the PGA and SA (1s) obtained for return periods of 475, 975 and 2475 years. Therefore, the controlling earthquakes for short- and long-period target motions were derived. This study was started a few months after the 2010 earthquake, as a response to an aid request from the Haitian government to the UPM, and the results are available for the definition of the first building code in Haiti.

Desarrollo de manejadores y pruebas de integración del computador de a bordo del microsatélite UPMSat-2

Varios grupos de la Universidad Politécnica de Madrid se encuentran actualmente desarrollando un micro-satélite de experimentación bajo el proyecto UPMSat-2, sucesor de otro exitoso proyecto similar, el UPM-Sat 1. Bajo este marco la autora del presente documento ha llevado a cabo la realización de tres tareas fundamentales para hacer posible la puesta en órbita de dicho satélite. Las tareas principales definidas como alcance de este proyecto pretenden facilitar el uso de la memoria no volátil del computador de a bordo y comprobar el funcionamiento de todos los sistemas del satélite. Por ello se ha realizado el arranque desde la memoria no volátil junto con un manejador para el uso de la misma y un conjunto de pruebas de validación del software e integración del hardware. La satisfacción con los resultados obtenidos ha hecho posible la inclusión del software y pruebas desarrolladas al conjunto de todo el software del proyecto UPMSat-2, contribuyendo así a la capacidad del satélite para ser puesto en órbita.---ABSTRACT---UPMSat-2, the successor of UPM-Sat 1, is a joint project for the development of a micro-satellite for experimentation, which is being carried out by various research groups at Universidad Politécnica de Madrid. The author of this document has developed three main tasks to make possible the correct operation of this satellite during the duration of its mission. The scope of the present work is to enable the use of the on-board computer’s non-volatile memory and the development of a software to test that the satellite’s subsystems are working properly. To this end, the non-volatile memory’s boot sequence has been implemented together with the driver to use such memory, and a series of validation and integration tests for the software and the hardware. The results of the this work have been satisfactory, therefore they have been included in UPMSat-2’s software, contributing this way to the capacity of the satellite to carry out its mission.