Contribution to the Analysis, Design and Assessment of Compact Antenna Test Ranges At Millimeter Wavelengths - Contribución al Análisis, Diseño y Caracterización de Sistemas de Medida de Antenas en Rango Compacto para Frecuencias Milimétricas

This Doctoral Thesis entitled Contribution to the analysis, design and assessment of compact antenna test ranges at millimeter wavelengths aims to deepen the knowledge of a particular antenna measurement system: the compact range, operating in the frequency bands of millimeter wavelengths. The thesis has been developed at Radiation Group (GR), an antenna laboratory which belongs to the Signals, Systems and Radiocommunications department (SSR), from Technical University of Madrid (UPM). The Radiation Group owns an extensive experience on antenna measurements, running at present four facilities which operate in different configurations: Gregorian compact antenna test range, spherical near field, planar near field and semianechoic arch system. The research work performed in line with this thesis contributes the knowledge of the first measurement configuration at higher frequencies, beyond the microwaves region where Radiation Group features customer-level performance. To reach this high level purpose, a set of scientific tasks were sequentially carried out. Those are succinctly described in the subsequent paragraphs. A first step dealed with the State of Art review. The study of scientific literature dealed with the analysis of measurement practices in compact antenna test ranges in addition with the particularities of millimeter wavelength technologies. Joint study of both fields of knowledge converged, when this measurement facilities are of interest, in a series of technological challenges which become serious bottlenecks at different stages: analysis, design and assessment. Thirdly after the overview study, focus was set on Electromagnetic analysis algorithms. These formulations allow to approach certain electromagnetic features of interest, such as field distribution phase or stray signal analysis of particular structures when they interact with electromagnetic waves sources. Properly operated, a CATR facility features electromagnetic waves collimation optics which are large, in terms of wavelengths. Accordingly, the electromagnetic analysis tasks introduce an extense number of mathematic unknowns which grow with frequency, following different polynomic order laws depending on the used algorithmia. In particular, the optics configuration which was of our interest consisted on the reflection type serrated edge collimator. The analysis of these devices requires a flexible handling of almost arbitrary scattering geometries, becoming this flexibility the nucleus of the algorithmia’s ability to perform the subsequent design tasks. This thesis’ contribution to this field of knowledge consisted on reaching a formulation which was powerful at the same time when dealing with various analysis geometries and computationally speaking. Two algorithmia were developed. While based on the same principle of hybridization, they reached different order Physics performance at the cost of the computational efficiency. Inter-comparison of their CATR design capabilities was performed, reaching both qualitative as well as quantitative conclusions on their scope. In third place, interest was shifted from analysis - design tasks towards range assessment. Millimetre wavelengths imply strict mechanical tolerances and fine setup adjustment. In addition, the large number of unknowns issue already faced in the analysis stage appears as well in the on chamber field probing stage. Natural decrease of dynamic range available by semiconductor millimeter waves sources requires in addition larger integration times at each probing point. These peculiarities increase exponentially the difficulty of performing assessment processes in CATR facilities beyond microwaves. The bottleneck becomes so tight that it compromises the range characterization beyond a certain limit frequency which typically lies on the lowest segment of millimeter wavelength frequencies. However the value of range assessment moves, on the contrary, towards the highest segment. This thesis contributes this technological scenario developing quiet zone probing techniques which achieves substantial data reduction ratii. Collaterally, it increases the robustness of the results to noise, which is a virtual rise of the setup’s available dynamic range. In fourth place, the environmental sensitivity of millimeter wavelengths issue was approached. It is well known the drifts of electromagnetic experiments due to the dependance of the re sults with respect to the surrounding environment. This feature relegates many industrial practices of microwave frequencies to the experimental stage, at millimeter wavelengths. In particular, evolution of the atmosphere within acceptable conditioning bounds redounds in drift phenomena which completely mask the experimental results. The contribution of this thesis on this aspect consists on modeling electrically the indoor atmosphere existing in a CATR, as a function of environmental variables which affect the range’s performance. A simple model was developed, being able to handle high level phenomena, such as feed - probe phase drift as a function of low level magnitudes easy to be sampled: relative humidity and temperature. With this model, environmental compensation can be performed and chamber conditioning is automatically extended towards higher frequencies. Therefore, the purpose of this thesis is to go further into the knowledge of millimetre wavelengths involving compact antenna test ranges. This knowledge is dosified through the sequential stages of a CATR conception, form early low level electromagnetic analysis towards the assessment of an operative facility, stages for each one of which nowadays bottleneck phenomena exist and seriously compromise the antenna measurement practices at millimeter wavelengths.

Theoretical analysis and numerical verification of the consistency of viscous smoothed-particle-hydrodynamics formulations in simulating free-surface flows

The theoretical formulation of the smoothed particle hydrodynamics (SPH) method deserves great care because of some inconsistencies occurring when considering free-surface inviscid flows. Actually, in SPH formulations one usually assumes that (i) surface integral terms on the boundary of the interpolation kernel support are neglected, (ii) free-surface conditions are implicitly verified. These assumptions are studied in detail in the present work for free-surface Newtonian viscous flow. The consistency of classical viscous weakly compressible SPH formulations is investigated. In particular, the principle of virtual work is used to study the verification of the free-surface boundary conditions in a weak sense. The latter can be related to the global energy dissipation induced by the viscous term formulations and their consistency. Numerical verification of this theoretical analysis is provided on three free-surface test cases including a standing wave, with the three viscous term formulations investigated.

Use of DFOT Heat Pulse Method ForWetting Pattern Determination in Drip Irrigation Emitters

Although there are numerous accurate measuring methods to determine soil moisture content in a spot, until very recently there were no precise in situ and in real time methods that were able to measure soil moisture content along a line. By means of the Distributed Fiber Optic Temperature Measurement method or DFOT, the temperature in 0.12 m intervals and long distances (up to 10,000 m) with a high time frequency and an accuracy of +0.2º C is determined. The principle of temperature measurement along a fiber optic cable is based on the thermal sensitivity of the relative intensities of backscattered photons that arise from collisions with electrons in the core of the glass fiber. A laser pulse, generated by the DTS unit, traversing a fiber optic cable will result in backscatter at two frequencies. The DTS quantifies the intensity of these backscattered photons and elapsed time between the pulse and the observed returned light. The intensity of one of the frequencies is strongly dependent on the temperature at the point where the scattering process occurred. The computed temperature is attributed to the position along the cable from which the light was reflected, computed from the time of travel for the light.

Implementation and management of private traffic limitation in urban areas: experiences and methodologies.

This paper shows the results of a research aimed to formulate a general model for supporting the implementation and management of an urban road pricing scheme. After a preliminary work, to define the state of the art in the field of sustainable urban mobility strategies, the problem has been theoretically set up in terms of transport economy, introducing the external costs’ concept duly translated into the principle of pricing for the use of public infrastructures. The research is based on the definition of a set of direct and indirect indicators to qualify the urban areas by land use, mobility, environmental and economic conditions. These indicators have been calculated for a selected set of typical urban areas in Europe on the basis of the results of a survey carried out by means of a specific questionnaire. Once identified the most typical and interesting applications of the road pricing concept in cities such as London (Congestion Charging), Milan (Ecopass), Stockholm (Congestion Tax) and Rome (ZTL), a large benchmarking exercise and the cross analysis of direct and indirect indicators, has allowed to define a simple general model, guidelines and key requirements for the implementation of a pricing scheme based traffic restriction in a generic urban area. The model has been finally applied to the design of a road pricing scheme for a particular area in Madrid, and to the quantification of the expected results of its implementation from a land use, mobility, environmental and economic perspective.

Training organization of a middle-size company engaged in information technology services: theory and practice

In order to establish an active internal know-how -reserve~ in an information processing and engineering services . company, a training architecture tailored to the company as an whole must be defined. When a company' s earnings come from . advisory services dynamically structured i.n the form of projects, as is the case at hand, difficulties arise that must be taken into account in the architectural design. The first difficulties are of a psychological nature and the design method proposed here begjns wi th the definition of the highest training metasystem, which is aimed at making adjustments for the variety of perceptions of the company's human components, before the architecture can be designed. This approach may be considered as an application of the cybernetic Law of Requisita Variety (Ashby) and of the Principle of Conceptual Integrity (Brooks) . Also included is a description of sorne of the results of the first steps of metasystems at the level of company organization.

Microstructural segmentation of 3D images of alsphalt specimen using Matlab engine

En este proyecto se ha desarrollado un código de MATLAB para el procesamiento de imágenes tomográficas 3D, de muestras de asfalto de carreteras en Polonia. Estas imágenes en 3D han sido tomadas por un equipo de investigación de la Universidad Tecnológica de Lodz (LUT). El objetivo de este proyecto es crear una herramienta que se pueda utilizar para estudiar las diferentes muestras de asfalto 3D y pueda servir para estudiar las pruebas de estrés que experimentan las muestras en el laboratorio. Con el objetivo final de encontrar soluciones a la degradación sufrida en las carreteras de Polonia, debido a diferentes causas, como son las condiciones meteorológicas. La degradación de las carreteras es un tema que se ha investigado desde hace muchos años, debido a la fuerte degradación causada por diferentes factores como son climáticos, la falta de mantenimiento o el tráfico excesivo en algunos casos. Es en Polonia, donde estos tres factores hacen que la composición de muchas carreteras se degrade rápidamente, sobre todo debido a las condiciones meteorológicas sufridas a lo largo del año, con temperaturas que van desde 30° C en verano a -20° C en invierno. Esto hace que la composición de las carreteras sufra mucho y el asfalto se levante, lo que aumenta los costos de mantenimiento y los accidentes de carretera. Este proyecto parte de la base de investigación que se lleva a cabo en la LUT, tratando de mejorar el análisis de las muestras de asfalto, por lo que se realizarán las pruebas de estrés y encontrar soluciones para mejorar el asfalto en las carreteras polacas. Esto disminuiría notablemente el costo de mantenimiento. A pesar de no entrar en aspectos muy técnicos sobre el asfalto y su composición, se ha necesitado realizar un estudio profundo sobre todas sus características, para crear un código capaz de obtener los mejores resultados. Por estas razones, se ha desarrollado en Matlab, los algoritmos que permiten el estudio de los especímenes 3D de asfalto. Se ha utilizado este software, ya que Matlab es una poderosa herramienta matemática que permite operar con matrices para realización de operaciones rápidamente, permitiendo desarrollar un código específico para el tratamiento y procesamiento de imágenes en 3D. Gracias a esta herramienta, estos algoritmos realizan procesos tales como, la segmentación de la imagen 3D, pre y post procesamiento de la imagen, filtrado o todo tipo de análisis microestructural de las muestras de asfalto que se están estudiando. El código presentado para la segmentación de las muestras de asfalto 3D es menos complejo en su diseño y desarrollo, debido a las herramientas de procesamiento de imágenes que incluye Matlab, que facilitan significativamente la tarea de programación, así como el método de segmentación utilizado. Respecto al código, este ha sido diseñado teniendo en cuenta el objetivo de facilitar el trabajo de análisis y estudio de las imágenes en 3D de las muestras de asfalto. Por lo tanto, el principal objetivo es el de crear una herramienta para el estudio de este código, por ello fue desarrollado para que pueda ser integrado en un entorno visual, de manera que sea más fácil y simple su utilización. Ese es el motivo por el cual todos estos algoritmos y funciones, que ha sido desarrolladas, se integrarán en una herramienta visual que se ha desarrollado con el GUIDE de Matlab. Esta herramienta ha sido creada en colaboración con Jorge Vega, y fue desarrollada en su proyecto final de carrera, cuyo título es: Segmentación microestructural de Imágenes en 3D de la muestra de asfalto utilizando Matlab. En esta herramienta se ha utilizado todo las funciones programadas en este proyecto, y tiene el objetivo de desarrollar una herramienta que permita crear un entorno gráfico intuitivo y de fácil uso para el estudio de las muestras de 3D de asfalto. Este proyecto se ha dividido en 4 capítulos, en un primer lugar estará la introducción, donde se presentarán los aspectos más importante que se va a componer el proyecto. En el segundo capítulo se presentarán todos los datos técnicos que se han tenido que estudiar para desarrollar la herramienta, entre los que cabe los tres temas más importantes que se han estudiado en este proyecto: materiales asfálticos, los principios de la tomografías 3D y el procesamiento de imágenes. Esta será la base para el tercer capítulo, que expondrá la metodología utilizada en la elaboración del código, con la explicación del entorno de trabajo utilizado en Matlab y todas las funciones de procesamiento de imágenes utilizadas. Además, se muestra todo el código desarrollado, así como una descripción teórica de los métodos utilizados para el pre-procesamiento y segmentación de las imagenes en 3D. En el capítulo 4, se mostrarán los resultados obtenidos en el estudio de una de las muestras de asfalto, y, finalmente, el último capítulo se basa en las conclusiones sobre el desarrollo de este proyecto. En este proyecto se ha llevado han realizado todos los puntos que se establecieron como punto de partida en el anteproyecto para crear la herramienta, a pesar de que se ha dejado para futuros proyectos nuevas posibilidades de este codigo, como por ejemplo, la detección automática de las diferentes regiones de una muestra de asfalto debido a su composición. Como se muestra en este proyecto, las técnicas de procesamiento de imágenes se utilizan cada vez más en multitud áreas, como pueden ser industriales o médicas. En consecuencia, este tipo de proyecto tiene multitud de posibilidades, y pudiendo ser la base para muchas nuevas aplicaciones que se puedan desarrollar en un futuro. Por último, se concluye que este proyecto ha contribuido a fortalecer las habilidades de programación, ampliando el conocimiento de Matlab y de la teoría de procesamiento de imágenes. Del mismo modo, este trabajo proporciona una base para el desarrollo de un proyecto más amplio cuyo alcance será una herramienta que puedas ser utilizada por el equipo de investigación de la Universidad Tecnológica de Lodz y en futuros proyectos. ABSTRACT In this project has been developed one code in MATLAB to process X-ray tomographic 3D images of asphalt specimens. These images 3D has been taken by a research team of the Lodz University of Technology (LUT). The aim of this project is to create a tool that can be used to study differents asphalt specimen and can be used to study them after stress tests undergoing the samples. With the final goal to find solutions to the degradation suffered roads in Poland due to differents causes, like weather conditions. The degradation of the roads is an issue that has been investigated many years ago, due to strong degradation suffered caused by various factors such as climate, poor maintenance or excessive traffic in some cases. It is in Poland where these three factors make the composition of many roads degrade rapidly, especially due to the weather conditions suffered along the year, with temperatures ranging from 30 o C in summer to -20 ° C in winter. This causes the roads suffers a lot and asphalt rises shortly after putting, increasing maintenance costs and road accident. This project part of the base that research is taking place at the LUT, in order to better analyze the asphalt specimens, they are tested for stress and find solutions to improve the asphalt on Polish roads. This would decrease remarkable maintenance cost. Although this project will not go into the technical aspect as asphalt and composition, but it has been required a deep study about all of its features, to create a code able to obtain the best results. For these reasons, there have been developed in Matlab, algorithms that allow the study of 3D specimens of asphalt. Matlab is a powerful mathematical tool, which allows arrays operate fastly, allowing to develop specific code for the treatment and processing of 3D images. Thus, these algorithms perform processes such as the multidimensional matrix sgementation, pre and post processing with the same filtering algorithms or microstructural analysis of asphalt specimen which being studied. All these algorithms and function that has been developed to be integrated into a visual tool which it be developed with the GUIDE of Matlab. This tool has been created in the project of Jorge Vega which name is: Microstructural segmentation of 3D images of asphalt specimen using Matlab engine. In this tool it has been used all the functions programmed in this project, and it has the aim to develop an easy and intuitive graphical environment for the study of 3D samples of asphalt. This project has been divided into 4 chapters plus the introduction, the second chapter introduces the state-of-the-art of the three of the most important topics that have been studied in this project: asphalt materials, principle of X-ray tomography and image processing. This will be the base for the third chapter, which will outline the methodology used in developing the code, explaining the working environment of Matlab and all the functions of processing images used. In addition, it will be shown all the developed code created, as well as a theoretical description of the methods used for preprocessing and 3D image segmentation. In Chapter 4 is shown the results obtained from the study of one of the specimens of asphalt, and finally the last chapter draws the conclusions regarding the development of this project.

Development of a Uniform Theory of Diffraction for Scattered and Surface Electromagnetic Field Analysis on a Cylinder

Con esta tesis ”Desarrollo de una Teoría Uniforme de la Difracción para el Análisis de los Campos Electromagnéticos Dispersados y Superficiales sobre un Cilindro” hemos iniciado una nueva línea de investigación que trata de responder a la siguiente pregunta: ¿cuál es la impedancia de superficie que describe una estructura de conductor eléctrico perfecto (PEC) convexa recubierta por un material no conductor? Este tipo de estudios tienen interés hoy en día porque ayudan a predecir el campo electromagnético incidente, radiado o que se propaga sobre estructuras metálicas y localmente convexas que se encuentran recubiertas de algún material dieléctrico, o sobre estructuras metálicas con pérdidas, como por ejemplo se necesita en determinadas aplicaciones aeroespaciales, marítimas o automovilísticas. Además, desde un punto de vista teórico, la caracterización de la impedancia de superficie de una estructura PEC recubierta o no por un dieléctrico es una generalización de varias soluciones que tratan ambos tipos de problemas por separado. En esta tesis se desarrolla una teoría uniforme de la difracción (UTD) para analizar el problema canónico del campo electromagnético dispersado y superficial en un cilindro circular eléctricamente grande con una condición de contorno de impedancia (IBC) para frecuencias altas. Construir una solución basada en UTD para este problema canónico es crucial en el desarrollo de un método UTD para el caso más general de una superficie arbitrariamente convexa, mediante el uso del principio de localización de los campos electromagnéticos a altas frecuencias. Esta tesis doctoral se ha llevado a cabo a través de una serie de hitos que se enumeran a continuación, enfatizando las contribuciones a las que ha dado lugar. Inicialmente se realiza una revisión en profundidad del estado del arte de los métodos asintóticos con numerosas referencias. As í, cualquier lector novel puede llegar a conocer la historia de la óptica geométrica (GO) y la teoría geométrica de la difracción (GTD), que dieron lugar al desarrollo de la UTD. Después, se investiga ampliamente la UTD y los trabajos más importantes que pueden encontrarse en la literatura. As í, este capítulo, nos coloca en la posición de afirmar que, hasta donde nosotros conocemos, nadie ha intentado antes llevar a cabo una investigación rigurosa sobre la caracterización de la impedancia de superficie de una estructura PEC recubierta por un material dieléctrico, utilizando para ello la UTD. Primero, se desarrolla una UTD para el problema canónico de la dispersión electromagnética de un cilindro circular eléctricamente grande con una IBC uniforme, cuando es iluminado por una onda plana con incidencia oblicua a frecuencias altas. La solución a este problema canónico se construye a partir de una solución exacta mediante una expansión de autofunciones de propagación radial. Entonces, ésta se convierte en una nueva expansión de autofunciones de propagación circunferencial muy apropiada para cilindros grandes, a través de la transformación de Watson. De esta forma, la expresión del campo se reduce a una integral que se evalúa asintóticamente, para altas frecuencias, de manera uniforme. El resultado se expresa según el trazado de rayos descrito en la UTD. La solución es uniforme porque tiene la importante propiedad de mantenerse continua a lo largo de la región de transición, a ambos lados de la superficie del contorno de sombra. Fuera de la región de transición la solución se reduce al campo incidente y reflejado puramente ópticos en la región iluminada del cilindro, y al campo superficial difractado en la región de sombra. Debido a la IBC el campo dispersado contiene una componente contrapolar a causa de un acoplamiento entre las ondas TEz y TMz (donde z es el eje del cilindro). Esta componente contrapolar desaparece cuando la incidencia es normal al cilindro, y también en la región iluminada cuando la incidencia es oblicua donde el campo se reduce a la solución de GO. La solución UTD presenta una muy buena exactitud cuando se compara numéricamente con una solución de referencia exacta. A continuación, se desarrolla una IBC efectiva para el cálculo del campo electromagnético dispersado en un cilindro circular PEC recubierto por un dieléctrico e iluminado por una onda plana incidiendo oblicuamente. Para ello se derivan dos impedancias de superficie en relación directa con las ondas creeping y de superficie TM y TE que se excitan en un cilindro recubierto por un material no conductor. Las impedancias de superficie TM y TE están acopladas cuando la incidencia es oblicua, y dependen de la geometría del problema y de los números de onda. Además, se ha derivado una impedancia de superficie constante, aunque con diferente valor cuando el observador se encuentra en la zona iluminada o en la zona de sombra. Después, se presenta una solución UTD para el cálculo de la dispersión de una onda plana con incidencia oblicua sobre un cilindro eléctricamente grande y convexo, mediante la generalización del problema canónico correspondiente al cilindro circular. La solución asintótica es uniforme porque se mantiene continua a lo largo de la región de transición, en las inmediaciones del contorno de sombra, y se reduce a la solución de rayos ópticos en la zona iluminada y a la contribución de las ondas de superficie dentro de la zona de sombra, lejos de la región de transición. Cuando se usa cualquier material no conductor se excita una componente contrapolar que tiende a desaparecer cuando la incidencia es normal al cilindro y en la región iluminada. Se discuten ampliamente las limitaciones de las fórmulas para la impedancia de superficie efectiva, y se compara la solución UTD con otras soluciones de referencia, donde se observa una muy buena concordancia. Y en tercer lugar, se presenta una aproximación para una impedancia de superficie efectiva para el cálculo de los campos superficiales en un cilindro circular conductor recubierto por un dieléctrico. Se discuten las principales diferencias que existen entre un cilindro PEC recubierto por un dieléctrico desde un punto de vista riguroso y un cilindro con una IBC. Mientras para un cilindro de impedancia se considera una impedancia de superficie constante o uniforme, para un cilindro conductor recubierto por un dieléctrico se derivan dos impedancias de superficie. Estas impedancias de superficie están asociadas a los modos de ondas creeping TM y TE excitadas en un cilindro, y dependen de la posición y de la orientación del observador y de la fuente. Con esto en mente, se deriva una solución UTD con IBC para los campos superficiales teniendo en cuenta las dependencias de la impedancia de superficie. La expansión asintótica se realiza, mediante la transformación de Watson, sobre la representación en serie de las funciones de Green correspondientes, evitando as í calcular las derivadas de orden superior de las integrales de tipo Fock, y dando lugar a una solución rápida y precisa. En los ejemplos numéricos realizados se observa una muy buena precisión cuando el cilindro y la separación entre el observador y la fuente son grandes. Esta solución, junto con el método de los momentos (MoM), se puede aplicar para el cálculo eficiente del acoplamiento mutuo de grandes arrays conformados de antenas de parches. Los métodos propuestos basados en UTD para el cálculo del campo electromagnético dispersado y superficial sobre un cilindro PEC recubierto de dieléctrico con una IBC efectiva suponen un primer paso hacia la generalización de una solución UTD para superficies metálicas convexas arbitrarias cubiertas por un material no conductor e iluminadas por una fuente electromagnética arbitraria. ABSTRACT With this thesis ”Development of a Uniform Theory of Diffraction for Scattered and Surface Electromagnetic Field Analysis on a Cylinder” we have initiated a line of investigation whose goal is to answer the following question: what is the surface impedance which describes a perfect electric conductor (PEC) convex structure covered by a material coating? These studies are of current and future interest for predicting the electromagnetic (EM) fields incident, radiating or propagating on locally smooth convex parts of highly metallic structures with a material coating, or by a lossy metallic surfaces, as for example in aerospace, maritime and automotive applications. Moreover, from a theoretical point of view, the surface impedance characterization of PEC surfaces with or without a material coating represents a generalization of independent solutions for both type of problems. A uniform geometrical theory of diffraction (UTD) is developed in this thesis for analyzing the canonical problem of EM scattered and surface field by an electrically large circular cylinder with an impedance boundary condition (IBC) in the high frequency regime, by means of a surface impedance characterization. The construction of a UTD solution for this canonical problem is crucial for the development of the corresponding UTD solution for the more general case of an arbitrary smooth convex surface, via the principle of the localization of high frequency EM fields. The development of the present doctoral thesis has been carried out through a series of landmarks that are enumerated as follows, emphasizing the main contributions that this work has given rise to. Initially, a profound revision is made in the state of art of asymptotic methods where numerous references are given. Thus, any reader may know the history of geometrical optics (GO) and geometrical theory of diffraction (GTD), which led to the development of UTD. Then, the UTD is deeply investigated and the main studies which are found in the literature are shown. This chapter situates us in the position to state that, as far as we know, nobody has attempted before to perform a rigorous research about the surface impedance characterization for material-coated PEC convex structures via UTD. First, a UTD solution is developed for the canonical problem of the EM scattering by an electrically large circular cylinder with a uniform IBC, when it is illuminated by an obliquely incident high frequency plane wave. A solution to this canonical problem is first constructed in terms of an exact formulation involving a radially propagating eigenfunction expansion. The latter is converted into a circumferentially propagating eigenfunction expansion suited for large cylinders, via the Watson transformation, which is expressed as an integral that is subsequently evaluated asymptotically, for high frequencies, in a uniform manner. The resulting solution is then expressed in the desired UTD ray form. This solution is uniform in the sense that it has the important property that it remains continuous across the transition region on either side of the surface shadow boundary. Outside the shadow boundary transition region it recovers the purely ray optical incident and reflected ray fields on the deep lit side of the shadow boundary and to the modal surface diffracted ray fields on the deep shadow side. The scattered field is seen to have a cross-polarized component due to the coupling between the TEz and TMz waves (where z is the cylinder axis) resulting from the IBC. Such cross-polarization vanishes for normal incidence on the cylinder, and also in the deep lit region for oblique incidence where it properly reduces to the GO or ray optical solution. This UTD solution is shown to be very accurate by a numerical comparison with an exact reference solution. Then, an effective IBC is developed for the EM scattered field on a coated PEC circular cylinder illuminated by an obliquely incident plane wave. Two surface impedances are derived in a direct relation with the TM and TE surface and creeping wave modes excited on a coated cylinder. The TM and TE surface impedances are coupled at oblique incidence, and depend on the geometry of the problem and the wave numbers. Nevertheless, a constant surface impedance is found, although with a different value when the observation point lays in the lit or in the shadow region. Then, a UTD solution for the scattering of an obliquely incident plane wave on an electrically large smooth convex coated PEC cylinder is introduced, via a generalization of the canonical circular cylinder problem. The asymptotic solution is uniform because it remains continuous across the transition region, in the vicinity of the shadow boundary, and it recovers the ray optical solution in the deep lit region and the creeping wave formulation within the deep shadow region. When a coating is present a cross-polar field term is excited, which vanishes at normal incidence and in the deep lit region. The limitations of the effective surface impedance formulas are discussed, and the UTD solution is compared with some reference solutions where a very good agreement is met. And in third place, an effective surface impedance approach is introduced for determining surface fields on an electrically large coated metallic circular cylinder. Differences in analysis of rigorouslytreated coated metallic cylinders and cylinders with an IBC are discussed. While for the impedance cylinder case a single constant or uniform surface impedance is considered, for the coated metallic cylinder case two surface impedances are derived. These are associated with the TM and TE creeping wave modes excited on a cylinder and depend on observation and source positions and orientations. With this in mind, a UTD based method with IBC is derived for the surface fields by taking into account the surface impedance variation. The asymptotic expansion is performed, via the Watson transformation, over the appropriate series representation of the Green’s functions, thus avoiding higher-order derivatives of Fock-type integrals, and yielding a fast and an accurate solution. Numerical examples reveal a very good accuracy for large cylinders when the separation between the observation and the source point is large. Thus, this solution could be efficiently applied in mutual coupling analysis, along with the method of moments (MoM), of large conformal microstrip array antennas. The proposed UTD methods for scattered and surface EM field analysis on a coated PEC cylinder with an effective IBC are considered the first steps toward the generalization of a UTD solution for large arbitrarily convex smooth metallic surfaces covered by a material coating and illuminated by an arbitrary EM source.

Detection of internal quality in kiwi with a new optical technique (TDRS)

A compact system based on time-resolved diffuse reflectance spectroscopy (TDRS) has been developed to measure internal fruit quality parameters and has been applied to the non-destructive estimation of firmness, sugar content and acidity of kiwifruits. This new optical technique, developed in medical applications and related areas, provides a complete optical characterisation of a diffusive sample as it estimates at the same time and independently the light absorption inside the tissues and the scattering across them. The working principle of the technique is the analysis of the attenuation and broadening of the time-distribution of the remitted light, and the correct interpretation with a proper theoretical model. This main advantage compared to conventional optical techniques (which are only able to register the global attenuation spectrum) added to the compact, portable prototype developed along a three-year work opens the possibilities of this new measurement method in the food industry.

The influence of transparency on self-evaluation as part of the university accreditation process in Peru.

In order to show the choice of transparency as the guiding principle of the accreditation process, the article evaluates its influence on the fundamental subprocess of self-evaluation, thereby confirming that transparency is an essential tool for continuous improvement of academic processes and those of educational quality management. It fosters educational innovation and permits the sustainability of the continuous accreditation process over time, resulting in greater probabilities of university self-regulation through systemization of the process, with the objective of continuous improvement of university degree programs. The article analyzes the influence of transparency on each activity of the self-evaluation process according to the Peruvian accreditation model prepared under the total quality approach, as a reference for other accreditation models, proposing concrete transparency actions and evaluating its influence on the stakeholder groups in the self-evaluation process, as well as on the efficiency and effectiveness of the process. It is concluded that transparency has a positive influence on the training of human capital and the formation of the university?s organizational culture, facilitating dissemination, understanding and involvement of the stakeholder groups in the continuous improvement of accreditation activities and increasing their acceptance of change and commitment to the process. It is confirmed that transparency contributes toward increasing the efficiency index of the self-evaluation process by reducing operating costs through adequate, accessible, timely contribution of information by the stakeholders and through the optimization of the time spent gathering relevant information. In addition, it is concluded that transparency contributes toward increasing the effectiveness index of self-evaluation by facilitating the achievement of its objectives through synthetic, useful, reliable interpretation of the education situation and the formulation of feasible improvement plans based on the adequacy, relevance, visibility, pertinence and truthfulness of the information analyzed.

Performance-based seismic design of a retaining wall

The design of containment walls suffering seismic loads traditionally has been realized with methods based on pseudoanalitic procedures such as Mononobe-Okabe's method, which it has led in certain occasions to insecure designs, that they have produced the ruin of many containment walls suffering the action of an earthquake. The recommendations gathered in Mononobe-Okabe's theory have been included in numerous Codes of Seismic Design. It is clear that a revision of these recommendations must be done. At present there is taking place an important review of the design methods of anti-seismic structures such as containment walls placed in an area of numerous earthquakes, by means of the introduction at the beginning of the decade of 1990 the Displacement Response Spectrum (DRS) and the Capacity Demand Diagram (CDD) that suppose an important change in the way of presenting the Elastic Response Spectrum (ERS). On the other hand in case of action of an earthquake, the dynamic characteristics of a soil have been referred traditionally to the speed of the shear waves that can be generated in a site, together with the characteristics of plasticity and damping of the soil. The Principle of the energy conservation explains why a shear upward propagating seismic wave can be amplified when travelling from a medium with high shear wave velocity (rock) to other medium with lower velocity (soil deposit), as it happened in the earthquake of Mexico of 1985. This amplification is a function of the speed gradient or of the contrast of impedances in the border of both types of mediums. A method is proposed in this paper for the design of containment walls in different soils, suffering to the action of an earthquake, based on the Performance-Based Seismic Design.

Design and optimization of optical, fiber based PSK demodulators for high-bit-rate optical networks

El objetivo principal de esta tesis ha sido el diseño y la optimización de receptores implementados con fibra óptica, para ser usados en redes ópticas de alta velocidad que empleen formatos de modulación de fase. En los últimos años, los formatos de modulación de fase (Phase Shift keying, PSK) han captado gran atención debido a la mejora de sus prestaciones respecto a los formatos de modulación convencionales. Principalmente, presentan una mejora de la eficiencia espectral y una mayor tolerancia a la degradación de la señal causada por la dispersión cromática, la dispersión por modo de polarización y los efectos no-lineales en la fibra óptica. En este trabajo, se analizan en detalle los formatos PSK, incluyendo sus variantes de modulación de fase diferencial (Differential Phase Shift Keying, DPSK), en cuadratura (Differential Quadrature Phase Shift Keying, DQPSK) y multiplexación en polarización (Polarization Multiplexing Differential Quadrature Phase Shift Keying, PM-DQPSK), con la finalidad de diseñar y optimizar los receptores que permita su demodulación. Para ello, se han analizado y desarrollado nuevas estructuras que ofrecen una mejora en las prestaciones del receptor y una reducción de coste comparadas con las actualmente disponibles. Para la demodulación de señales DPSK, en esta tesis, se proponen dos nuevos receptores basados en un interferómetro en línea Mach-Zehnder (MZI) implementado con tecnología todo-fibra. El principio de funcionamiento de los MZI todo-fibra propuestos se asienta en la interferencia modal que se produce en una fibra multimodo (MMF) cuando se situada entre dos monomodo (SMF). Este tipo de configuración (monomodo-multimodo-monomodo, SMS) presenta un buen ratio de extinción interferente si la potencia acoplada en la fibra multimodo se reparte, principal y equitativamente, entre dos modos dominantes. Con este objetivo, se han estudiado y demostrado tanto teórica como experimentalmente dos nuevas estructuras SMS que mejoran el ratio de extinción. Una de las propuestas se basa en emplear una fibra multimodo de índice gradual cuyo perfil del índice de refracción presenta un hundimiento en su zona central. La otra consiste en una estructura SMS con las fibras desalineadas y donde la fibra multimodo es una fibra de índice gradual convencional. Para las dos estructuras, mediante el análisis teórico desarrollado, se ha demostrado que el 80 – 90% de la potencia de entrada se acopla a los dos modos dominantes de la fibra multimodo y se consigue una diferencia inferior al 10% entre ellos. También se ha demostrado experimentalmente que se puede obtener un ratio de extinción de al menos 12 dB. Con el objeto de demostrar la capacidad de estas estructuras para ser empleadas como demoduladores de señales DPSK, se han realizado numerosas simulaciones de un sistema de transmisión óptico completo y se ha analizado la calidad del receptor bajo diferentes perspectivas, tales como la sensibilidad, la tolerancia a un filtrado óptico severo o la tolerancia a las dispersiones cromática y por modo de polarización. En todos los casos se ha concluido que los receptores propuestos presentan rendimientos comparables a los obtenidos con receptores convencionales. En esta tesis, también se presenta un diseño alternativo para la implementación de un receptor DQPSK, basado en el uso de una fibra mantenedora de la polarización (PMF). A través del análisi teórico y del desarrollo de simulaciones numéricas, se ha demostrado que el receptor DQPSK propuesto presenta prestaciones similares a los convencionales. Para complementar el trabajo realizado sobre el receptor DQPSK basado en PMF, se ha extendido el estudio de su principio de demodulación con el objeto de demodular señales PM-DQPSK, obteniendo como resultado la propuesta de una nueva estructura de demodulación. El receptor PM-DQPSK propuesto se basa en la estructura conjunta de una única línea de retardo junto con un rotador de polarización. Se ha analizado la calidad de los receptores DQPSK y PM-DQPSK bajo diferentes perspectivas, tales como la sensibilidad, la tolerancia a un filtrado óptico severo, la tolerancia a las dispersiones cromática y por modo de polarización o su comportamiento bajo condiciones no-ideales. En comparación con los receptores convencionales, nuestra propuesta exhibe prestaciones similares y además permite un diseño más simple que redunda en un coste potencialmente menor. En las redes de comunicaciones ópticas actuales se utiliza la tecnología de multimplexación en longitud de onda (WDM) que obliga al uso de filtros ópticos con bandas de paso lo más estrechas posibles y a emplear una serie de dispositivos que incorporan filtros en su arquitectura, tales como los multiplexores, demultiplexores, ROADMs, conmutadores y OXCs. Todos estos dispositivos conectados entre sí son equivalentes a una cadena de filtros cuyo ancho de banda se va haciendo cada vez más estrecho, llegando a distorsionar la forma de onda de las señales. Por esto, además de analizar el impacto del filtrado óptico en las señales de 40 Gbps DQPSK y 100 Gbps PM-DQPSK, este trabajo de tesis se completa estudiando qué tipo de filtro óptico minimiza las degradaciones causadas en la señal y analizando el número máximo de filtros concatenados que permiten mantener la calidad requerida al sistema. Se han estudiado y simulado cuatro tipos de filtros ópticos;Butterworth, Bessel, FBG y F-P. ABSTRACT The objective of this thesis is the design and optimization of optical fiber-based phase shift keying (PSK) demodulators for high-bit-rate optical networks. PSK modulation formats have attracted significant attention in recent years, because of the better performance with respect to conventional modulation formats. Principally, PSK signals can improve spectrum efficiency and tolerate more signal degradation caused by chromatic dispersion, polarization mode dispersion and nonlinearities in the fiber. In this work, many PSK formats were analyzed in detail, including the variants of differential phase modulation (Differential Phase Shift Keying, DPSK), in quadrature (Differential Quadrature Phase Shift Keying, DQPSK) and polarization multiplexing (Polarization Multiplexing Differential Quadrature Phase Shift Keying, PM-DQPSK), in order to design and optimize receivers enabling demodulations. Therefore, novel structures, which offer good receiver performances and a reduction in cost compared to the current structures, have been analyzed and developed. Two novel receivers based on an all-fiber in-line Mach-Zehnder interferometer (MZI) were proposed for DPSK signal demodulation in this thesis. The operating principle of the all-fiber MZI is based on the modal interference that occurs in a multimode fiber (MMF) when it is located between two single-mode fibers (SMFs). This type of configuration (Single-mode-multimode-single-mode, SMS) can provide a good extinction ratio if the incoming power from the SMF could be coupled equally into two dominant modes excited in the MMF. In order to improve the interference extinction ratio, two novel SMS structures have been studied and demonstrated, theoretically and experimentally. One of the two proposed MZIs is based on a graded-index multimode fiber (MMF) with a central dip in the index profile, located between two single-mode fibers (SMFs). The other one is based on a conventional graded-index MMF mismatch spliced between two SMFs. Theoretical analysis has shown that, in these two schemes, 80 – 90% of the incoming power can be coupled into the two dominant modes exited in the MMF, and the power difference between them is only ~10%. Experimental results show that interference extinction ratio of 12 dB could be obtained. In order to demonstrate the capacity of these two structures for use as DPSK signal demodulators, numerical simulations in a completed optical transmission system have been carried out, and the receiver quality has been analyzed under different perspectives, such as sensitivity, tolerance to severe optical filtering or tolerance to chromatic and polarization mode dispersion. In all cases, from the simulation results we can conclude that the two proposed receivers can provide performances comparable to conventional ones. In this thesis, an alternative design for the implementation of a DQPSK receiver, which is based on a polarization maintaining fiber (PMF), was also presented. To complement the work made for the PMF-based DQPSK receiver, the study of the demodulation principle has been extended to demodulate PM-DQPSK signals, resulting in the proposal of a novel demodulation structure. The proposed PM-DQPSK receiver is based on only one delay line and a polarization rotator. The quality of the proposed DQPSK and PM-DQPSK receivers under different perspectives, such as sensitivity, tolerance to severe optical filtering, tolerance to chromatic dispersion and polarization mode dispersion, or behavior under non-ideal conditions. Compared with the conventional receivers, our proposals exhibit similar performances but allow a simpler design which can potentially reduce the cost. The wavelength division multiplexing (WDM) technology used in current optical communications networks requires the use of optical filters with a passband as narrow as possible, and the use of a series of devices that incorporate filters in their architecture, such as multiplexers, demultiplexers, switches, reconfigurable add-drop multiplexers (ROADMs) and optical cross-connects (OXCs). All these devices connected together are equivalent to a chain of filters whose bandwidth becomes increasingly narrow, resulting in distortion to the waveform of the signals. Therefore, in addition to analyzing the impact of optical filtering on signal of 40 Gbps DQPSK and 100 Gbps PM-DQPSK, we study which kind of optical filter minimizes the signal degradation and analyze the maximum number of concatenated filters for maintaining the required quality of the system. Four types of optical filters, including Butterworth, Bessel, FBG and FP, have studied and simulated.

1950 En torno al Museo Louisiana 1970

La tesis “1950 En torno al Museo Louisiana 1970” analiza varias obras relacionadas con el espacio doméstico, que se realizaron entre 1950 y 1970 en Dinamarca, un periodo de esplendor de la Arquitectura Moderna. Tras el aislamiento y restricciones del conflicto bélico que asoló Europa, los jóvenes arquitectos daneses, estaban deseosos por experimentar nuevas ideas de procedencia internacional, favorecidos por diferentes circunstancias, encuentran el mejor campo de ensayo en el espacio doméstico. La mejor arquitectura doméstica en Dinamarca, de aquel periodo, debe entenderse como un sistema compuesto por diferentes autores, que tienen en común muchas más similitudes que diferencias, se complementan unos a otros. Para la comprensión y el entendimiento de ello se hace necesario el estudio de varias figuras y edificios, que completen este sistema cuya investigación está escasamente desarrollada. La tesis propone un viaje para conocer los nombres de algunos de sus protagonistas, que mostraron con su trabajo, que tradición y vanguardia no estarán reñidas. El objetivo es desvelar las claves de la Modernidad Danesa, reconocer, descubrir y recuperar el legado de algunos de sus protagonistas en el ámbito doméstico, cuya lección se considera de total actualidad. Una arquitectura que asume las aportaciones extranjeras con moderación y crítica, cuya íntima relación con la tradición arquitectónica y la artesanía propias, será una de sus notas especiales. Del estudio contrastado de varios proyectos y versiones, se obtienen valores comunes entre sus autores, al igual que se descubren sus afinidades o diferencias respecto a los mismos asuntos; que permitirán comprender sus actuaciones según las referencias e influencias, y definir las variables que configuran sus espacios arquitectónicos. La línea de conexión entre los edificios elegidos será su particular relación con la naturaleza y el lugar en que se integran. La fachada, lugar donde se negociará la relación entre el interior y el paisaje, será un elemento entendido de un modo diferente en cada uno de ellos, una relación que se extenderá en todas ellas, más allá de su perímetro. La investigación se ha estructurado en seis capítulos, que van precedidos de una Introducción. En el capítulo primero, se estudian y se señalan los antecedentes, las figuras y edificios más relevantes de la Tradición Danesa, para la comprensión y el esclarecimiento de algunas de las claves de su Modernidad en el campo de la Arquitectura, que se produce con una clara intención de encontrar su propia identidad y expresión. Esta Modernidad floreciente se caracteriza por la asimilación de otras culturas extranjeras desde la moderación, con un punto de vista crítico, y encuentra sus raíces ancladas a la tradición arquitectónica y la artesanía propia, que fragua en la aparición de un ideal común con enorme personalidad y que hoy se valora como una auténtica aportación de una cultura considerada entonces periférica. Se mostrará el debate y el camino seguido por las generaciones anteriores, a las obras análizadas. Las sensibilidades por lo vernáculo y lo clásico, que aparentemente son contradictorias, dominaran el debate con la misma veracidad y respetabilidad. La llamada tercera generación por Sigfried Giedion reanudará la práctica entre lo clásico y lo vernáculo, apoyados en el espíritu del trabajo artesanal y de la tradición, con el objetivo de conocer del acto arquitectónico su “la verdad” y “la esencia original”. El capítulo segundo, analiza la casa Varming, de 1953, situada en un área residencial de Gentofte, por Eva y Nils Koppel, que reinterpreta la visión de Asplund de un paisaje interior continuación del exterior, donde rompen la caja de ladrillo macizo convencional propia de los años 30. Es el ejemplo más poderoso de la unión de tradición e innovación en su obra residencial. Sus formas sobrias entre el Funcionalismo Danés y la Modernidad se singularizarán por su abstracción y volúmenes limpios que acentúan el efecto de su geometría, prismática y brutalista. El desplazamiento de los cuerpos que lo componen, unos sobre otros, generan un ritmo, que se producirá a otras escalas, ello unido a las variaciones de sus formas y a la elección de sus materiales, ladrillo y madera, le confieren a la casa un carácter orgánico. El edificio se ancla a la tierra resolviéndose en diferentes niveles tras el estudio del lugar y su topografía. El resultado es una versión construida del paisaje, en la cual el edificio da forma al lugar y ensalza la experiencia del escenario natural. La unidad de las estructuras primitivas, parece estar presente. Constituye un ejemplo de la “La idea de Promenade de Asplund”, el proyecto ofrece diferentes recorridos, permitiendo su propia vivencia de la casa, que ofrece la posibilidad vital de decidir. El capítulo tercero trata sobre el pabellón de invitados de Niels Bohr de 1957, situado un área boscosa, en Tisvilde Hegn, fue el primer edificio del arquitecto danés Vilhelm Wohlert. Arraigado a la Tradición Danesa, representa una renovación basada en la absorción de influencias extranjeras: la Arquitectura Americana y la Tradición Japonesa. La caja de madera, posada sobre un terreno horizontal, tiene el carácter sensible de un organismo vivo, siempre cambiante según las variaciones de luz del día o temperatura. Cuando se abre, crea una prolongación del espacio interior, que se extiende a la naturaleza circundante, y se expande hacia el espacio exterior, permitiendo su movilización. Se establece una arquitectura de flujos. Hay un interés por la materia, su textura y el efecto emocional que emana. Las proporciones y dimensiones del edificio están reguladas por un módulo, que se ajusta a la medida del hombre, destacando la gran unidad del edificio. La llave se su efecto estético está en su armonía y equilibrio, que transmiten serenidad y belleza. El encuentro con la naturaleza es la lección más básica del proyecto, donde un mundo de relaciones es amable al ser humano. El capítulo cuarto, analiza el proyecto del Museo Louisiana de 1958, en Humlebæk, primer proyecto de la pareja de arquitectos daneses Jørgen Bo y Vilhelm Wohlert. La experiencia en California de Wohlert donde será visitado por Bo, será trascendental para el desarrollo de Louisiana, donde la identidad Danesa se fusiona con la asimilación de otras culturas, la arquitectura de Frank Lloyd Wright, la del área de la Bahía y la Tradición Japonesa principalmente. La idea del proyecto es la de una obra de arte integral: arquitectura, arte y paisaje, coexistirían en un mismo lugar. Diferentes recursos realzarán su carácter residencial, como el uso de los materiales propios de un entorno doméstico, la realización a la escala del hombre, el modo de usar la iluminación. Cubiertas planas que muestran su artificialidad, parecen flotar sobre galerías acristaladas, acentuarán la fuerza del plano horizontal y establecerán un recorrido en zig-zag de marcado ritmo acompasado. Ritmo que tiene que ver con la encarnación del pulso de la naturaleza, que se acompaña de juegos de luz, y de otras vibraciones materiales a diferentes escalas, imagen, que encuentra una analogía semejante en la cultura japonesa. Todo se coordina con la trama estructural, que conlleva a una construcción y proporción disciplinada. Louisiana atiende al principio de crecimiento de la naturaleza, con la que su conexión es profunda. Hay un dinamismo expresado por el despliegue del edificio, que evoca a algunos proyectos de la Tradición Japonesa. Los blancos muros tienen su propia identidad como formas en sí mismas, avanzan prolongándose fuera de la línea del vidrio, se mueven libremente siguiendo el orden estructural, acompañando al espacio que fluye, en contacto directo con la naturaleza que está en un continuo estado de flujos. Se da todo un mundo de relaciones, donde existe un dialogo entre el paisaje, arte y arquitectura. El capítulo quinto, se dedica a analizar la segunda casa del arquitecto danés Halldor Gunnløgsson, de 1959. Evoca a la Arquitectura Japonesa y Americana, pero es principalmente resultado de una fuerte voluntad y disciplina artística personal. La cubierta, plana, suspendida sobre una gran plataforma pavimentada, que continúa la sección del terreno construyendo de lugar, tiene una gran presencia y arroja una profunda sombra bajo ella. En el interior un espacio único, que se puede dividir eventualmente, discurre en torno a un cuerpo central. El espacio libre fluye, extendiéndose a través de la transparencia de sus ventanales a dos espacios contrapuestos: un patio ajardinado íntimo, que inspira calma y sosiego; y la naturaleza salvaje del mar que proyecta el color del cielo, ambos en constante estado de cambio. El proyecto se elabora de un modo rigurosamente formal, existiendo al mismo tiempo un perfecto equilibrio entre la abstracción de su estructura y su programa. La estructura de madera cuyo orden se extiende más allá de los límites de su perímetro, está formada por pórticos completos como elementos libres, queda expuesta, guardando una estrecha relación con el concepto de modernidad de Mies, equivalente a la arquitectura clásica. La preocupación por el efecto estético es máxima, nada es improvisado. Pero además la combinación de materiales y el juego de las texturas hay una cualidad táctil, cierto erotismo, que flota alrededor de ella. La precisión constructiva y su refinamiento se acercan a Mies. La experiencia del espacio arquitectónico es una vivencia global. La influencia de la arquitectura japonesa, es más conceptual que formal, revelada en un respeto por la naturaleza, la búsqueda del refinamiento a través de la moderación, la eliminación de los objetos innecesarios que distraen de la experiencia del lugar y la preocupación por la luz y la sombra, donde se establece cierto paralelismo con el oscuro mundo del invierno nórdico. Hay un entendimiento de que el espacio, en lugar de ser un objeto inmaterial definido por superficies materiales se entiende como interacciones dinámicas. El capítulo sexto. Propone un viaje para conocer algunas de las viviendas unifamiliares más interesantes que se construyeron en el periodo, que forman parte del sistema investigado. Del estudio comparado y orientado en varios temas, se obtienen diversa conclusiones propias del sistema estudiado. La maestría de la sustancia y la forma será una característica distintiva en Dinamarca, se demuestra que hay un acercamiento a la cultura de Oriente, conceptual y formal, y unos intereses comunes con cierta arquitectura Americana. Su lección nos sensibiliza hacia un sentido fortalecido de proporción, escala, materialidad, textura y peso, densidad del espacio, se valora lo táctil y lo visual, hay una sensibilidad hacia la naturaleza, hacia lo humano, hacia el paisaje, la integridad de la obra. ABSTRACT The thesis “1950 around the Louisiana Museum 1970” analyses several works related to domestic space, which were carried out between 1950 and 1970 in Denmark, a golden age of modern architecture. After the isolation and limitations brought about by the war that blighted Europe, young Danish architects were keen to experiment with ideas of an international origin, encouraged by different circumstances. They find the best field of rehearsal to be the domestic space. The best architecture of that period in Denmark should be understood as a system composed of different authors, who have in common with each other many more similarities than differences, thus complimenting each other. In the interests of understanding, the study of a range of figures and buildings is necessary so that this system, the research of which is still in its infancy, can be completed. The thesis proposes a journey of discovery through the names of some of those protagonists who were showcased through their work so that tradition and avant- garde could go hand in hand. The objective is to unveil the keys to Danish Modernity; to recognise, discover and revive the legacy of some of its protagonists in the domestic field whose lessons are seen as entirely of the present. For an architect, the taking on of modern contributions with both moderation and caution, with its intimate relationship with architectural tradition and its own craft, will be one of his hallmarks. With the study set against several projects and versions, one can derive common values among their authors. In the same way their affinities and differences in respect of the same issue emerge. This will allow an understanding of their measures in line with references and influences and enable the defining of the variables of their architectural spaces. The common line between the buildings selected will be their particular relationship with nature and the space with which they integrate. The façade, the place where the relationship between the interior and the landscape would be negotiated, wouldl be the discriminating element in a distinct way for each one of them. It is through each of these facades that this relationship would extend, and far beyond their physical perimeter. The investigation has been structured into six chapters, preceded by an introduction. The first chapter outlines and analyses the backgrounds, figures and buildings most relevant to the Danish Tradition. This is to facilitate the understanding and elucidation of some of the keys to its modernity in the field of architecture, which came about with the clear intention to discover its own identity and expression. This thriving modernity is characterized by its moderate assimilation with foreign cultures with a critical eye, and finds its roots anchored in architectural tradition and its own handcraft. It is forged in the emergence of a common ideal of enormous personality which today has come to be valued as an authentic contribution to the sphere from a culture that was formerly seen as on the peripheries. What will be demonstrated is the path taken by previous generations to these works and the debate that surrounds them. The sensibilities for both the vernacular and the classic, which at first glance may seem contradictory, will dominate the debate with the same veracity and respectability. The so-called third generation of Sigfried Giedion will revive the process between the classic and the vernacular, supported in spirit by the handcraft work and by tradition, with the objective of discovering the “truth” and the “original essence” of the architectural act. The second chapter analyzes the Varming house, built by Eva and Nils Koppel 1953, which is situated in a residential area of Gentofte. This reinterprets Asplund’s vision of an interior landscape extending to the exterior, where we see a break with the conventional sturdy brick shell of the 1930s. It is the most powerful example of the union of tradition and innovation in his their residential work. Their sober forms caught between Danish Functionalism and modernity are characterized by their abstraction and clean shapes which accentuate their prismatic and brutal geometry, The displacement of the parts of which they are composed, one over the other, generate a rhythm. This is produced to varying scales and is closely linked to its forms and the selection of materials – brick and wood – that confer an organic character to the house. The building is anchored to the earth, finding solution at different levels through the study of place and topography. The result is an adaption constructed out of the landscape, in which the building gives form to the place and celebrates the experience of the natural setting. The unity of primitive structures appears to be present. It constitutes an example of “Asplund’s Promenade Idea”. Different routes of exploration within are available to the visitor, allowing for one’s own personal experience of the house, allowing in turn for the vital chance to decide. The third chapter deals with Niels Bohr’s guest pavilion. Built in 1957, it is situated in a wooded area of Tisvilde Hegn and was the architect Vilhelm Wohlert’s first building. Rooted in the Danish Tradition, it represents a renewal based on the absorption of foreign influences: American architecture and the Japanese tradition. The wooden box, perched atop a horizontal terrain, possesses the sensitive character of the living organism, ever-changing in accordance with the variations in daylight and temperature. When opened up, it creates an elongation of the interior space which extends into the surrounding nature and it expands towards the exterior space, allowing for its mobilisation. It establishes an architecture of flux. There is interest in the material, its texture and the emotional effect it inspires. The building’s proportions and dimensions are regulated by a module, which is adjusted by hand, bringing out the great unity of the building. The key to its aesthetic effect is its harmony and equilibrium, which convey serenity and beauty. The meeting with nature is the most fundamental lesson of the project, where a world of relationships softens the personality of the human being. The fourth chapter analyzes the Louisiana Museum project of 1958 in 1958. It was the first project of the Danish architects Jørgen Bo and Vilhelm Wohlert. Wohlert’s experience in California where he was visited by Bo would be essential to the development of Louisiana, where the Danish identity is fused in assimilation with other cultures, the architecture of Frank Lloyd Wright, that of the Bahía area and principally the Japanese tradition. The idea of the project was for an integrated work of art: architecture, art and landscape, which would coexist in the same space. A range of different resources would realize the residential character, such as the use of materials taken from a domestic environment, the attainment of human scale and the manner in which light was used. Flat roof plans that show their artificiality and appear to float over glassed galleries. They accentuate the strength of the horizontal plan and establish a zigzag route of marked and measured rhythm. It is a rhythm that has to do with the incarnation of nature’s pulse, which is accompanied with plays of light, as well as material vibrations of different scales, imagery which uncovers a parallel analogy with Japanese culture. Everything is coordinated along a structural frame, which involves a disciplined construction and proportion. Louisiana cherishes nature’s principle of growth, to which its connection is profound. Here is a dynamism expressed through the disposition of the building, which evokes in some projects the Japanese tradition. The white walls possess their own identity as forms in their own right. They advance, extending beyond the line of glass, moving freely along the structural line, accompanying a space that flows and in direct contact with nature that is itself in a constant state of flux. It creates a world of relationships, where dialogue exists between the landscape, art and architecture. The fifth chapter is dedicated to analyzing the Danish architect Halldor Gunnløgsson’s second house, built in 1959. It evokes both Japanese and American architecture but is principally the result of a strong will and personal artistic discipline. The flat roof suspended above a large paved platform – itself continuing the constructed terrain of the place – has great presence and casts a heavy shadow beneath. In the interior, a single space, which can at length be divided and which flows around a central space. The space flows freely, extending through the transparency of its windows which give out onto two contrasting locations: an intimate garden patio, inspiring calm and tranquillity, and the wild nature of the sea which projects the colour of sky, both in a constant state of change. The project is realized in a rigorously formal manner. A perfect balance exists between the abstraction of his structure and his project. The wooden structure, whose order extends beyond the limits of its perimeter, is formed of complete porticos of free elements. It remains exposed, maintaining a close relationship with Mies’ concept of modernity, analogous to classical architecture. The preoccupation with the aesthetic effect is paramount and nothing is improvised. But in addition to this - the combination of materials and the play of textures - there is a tactile quality, a certain eroticism, which lingers all about. The constructive precision and its refinement are close to Mies. The experience of the architectural space is universal. The influence of Japanese architecture, more conceptual than formal, is revealed in a respect for nature. It can be seen in the search for refinement through moderation, the elimination of the superfluous object that distract from the experience of place and the preoccupation with light and shade, where a certain parallel with the dark world of the Nordic winter is established. There is an understanding that space, rather than being an immaterial object defined by material surfaces, extends instead as dynamic interactions. The sixth chapter. This proposes a journey to discover some of the unfamiliar residences of most interest which were constructed in the period, and which form part of the system being investigated. Through the study of comparison and one which is geared towards various themes, diverse conclusions are drawn regarding the system being researched. The expertise in substance and form will be a distinctive characteristic in Denmark, demonstrating an approach to the culture of the Orient, both conceptual and formal, and some common interests in certain American architecture. Its teachings sensitize us to a strengthened sense of proportion, scale, materiality, texture and weight and density of space. It values both the tactile and the visual. There is a sensitivity to nature, to the human, to the landscape and to the integrity of the work.

The major allergens of birch pollen and cow milk, Bet v 1 and Bos d 5, are structurally related to human licocalin 2, enabling them to manipulate T-helper cells depending on their load with siderophore-bound iron

We conclude that Bet v 1 and Bos d 5 not only structurally mimic human LCN2, but also functionally by their ability to bind iron via siderophores. The apo-forms promote Th2 cells, whereas the holo-forms appear to be immunosuppressive. These results provide for the first time a functional understanding on the principle of allergenicity of major allergens from entirely independent sources, like birch and milk.