Uso de DES y RANS no estacionario para la simulación del flujo alrededor de una carena Wigley - Use of Unsteady RANS and DES to simulate flows around a Wigley Hull)

Computer Fluid Dynamics tools have already become a valuable instrument for Naval Architects during the ship design process, thanks to their accuracy and the available computer power. Unfortunately, the development of RANSE codes, generally used when viscous effects play a major role in the flow, has not reached a mature stage, being the accuracy of the turbulence models and the free surface representation the most important sources of uncertainty. Another level of uncertainty is added when the simulations are carried out for unsteady flows, as those generally studied in seakeeping and maneuvering analysis and URANS equations solvers are used. Present work shows the applicability and the benefits derived from the use of new approaches for the turbulence modeling (Detached Eddy Simulation) and the free surface representation (Level Set) on the URANS equations solver CFDSHIP-Iowa. Compared to URANS, DES is expected to predict much broader frequency contents and behave better in flows where boundary layer separation plays a major role. Level Set methods are able to capture very complex free surface geometries, including breaking and overturning waves. The performance of these improvements is tested in set of fairly complex flows, generated by a Wigley hull at pure drift motion, with drift angle ranging from 10 to 60 degrees and at several Froude numbers to study the impact of its variation. Quantitative verification and validation are performed with the obtained results to guarantee their accuracy. The results show the capability of the CFDSHIP-Iowa code to carry out time-accurate simulations of complex flows of extreme unsteady ship maneuvers. The Level Set method is able to capture very complex geometries of the free surface and the use of DES in unsteady simulations highly improves the results obtained. Vortical structures and instabilities as a function of the drift angle and Fr are qualitatively identified. Overall analysis of the flow pattern shows a strong correlation between the vortical structures and free surface wave pattern. Karman-like vortex shedding is identified and the scaled St agrees well with the universal St value. Tip vortices are identified and the associated helical instabilities are analyzed. St using the hull length decreases with the increase of the distance along the vortex core (x), which is similar to results from other simulations. However, St scaled using distance along the vortex cores shows strong oscillations compared to almost constants for those previous simulations. The difference may be caused by the effect of the free-surface, grid resolution, and interaction between the tip vortex and other vortical structures, which needs further investigations. This study is exploratory in the sense that finer grids are desirable and experimental data is lacking for large α, especially for the local flow. More recently, high performance computational capability of CFDSHIP-Iowa V4 has been improved such that large scale computations are possible. DES for DTMB 5415 with bilge keels at α = 20º were conducted using three grids with 10M, 48M and 250M points. DES analysis for flows around KVLCC2 at α = 30º is analyzed using a 13M grid and compared with the results of DES on the 1.6M grid by. Both studies are consistent with what was concluded on grid resolution herein since dominant frequencies for shear-layer, Karman-like, horse-shoe and helical instabilities only show marginal variation on grid refinement. The penalties of using coarse grids are smaller frequency amplitude and less resolved TKE. Therefore finer grids should be used to improve V&V for resolving most of the active turbulent scales for all different Fr and α, which hopefully can be compared with additional EFD data for large α when it becomes available.

Spaces of the Past, Histories of the Present: An Interview with Stuart Elden and Derek Gregory

The ontologies of space and territory, our experience of them and the techniques we use to govern them, the very conception of the socio-spatial formations that we inhabit, are all historically specific: they depend on a genealogy of practices, knowledges, discourses, regulations, performances and representations articulated in a way that is extremely complex yet nevertheless legible over time. In this interview we look at the logic and the patterns that intertwine space and time — both as objects and tools of inquiry — though a cross-disciplinary dialogue. The discussion with Stuart Elden and Derek Gregory covers the place of history in socio-spatial theory and in their own work, old and new ways of thinking about the intersection between history and territory, space and time, the implications of geography and history for thinking about contemporary politics, and the challenges now faced by critical thought and academic work in the current neo-liberal attack on public universities and the welfare state

Clean Coal Technologies Scenario and Evaluation of Present CO2 Dwindling Initiatives to Approach Zero Emission Power Stations By Coal Combustion. Deployment Situation and Evaluation Study

In the present uncertain global context of reaching an equal social stability and steady thriving economy, power demand expected to grow and global electricity generation could nearly double from 2005 to 2030. Fossil fuels will remain a significant contribution on this energy mix up to 2050, with an expected part of around 70% of global and ca. 60% of European electricity generation. Coal will remain a key player. Hence, a direct effect on the considered CO2 emissions business-as-usual scenario is expected, forecasting three times the present CO2 concentration values up to 1,200ppm by the end of this century. Kyoto protocol was the first approach to take global responsibility onto CO2 emissions monitoring and cap targets by 2012 with reference to 1990. Some of principal CO2emitters did not ratify the reduction targets. Although USA and China spur are taking its own actions and parallel reduction measures. More efficient combustion processes comprising less fuel consuming, a significant contribution from the electricity generation sector to a CO2 dwindling concentration levels, might not be sufficient. Carbon Capture and Storage (CCS) technologies have started to gain more importance from the beginning of the decade, with research and funds coming out to drive its come in useful. After first researching projects and initial scale testing, three principal capture processes came out available today with first figures showing up to 90% CO2 removal by its standard applications in coal fired power stations. Regarding last part of CO2 reduction chain, two options could be considered worthy, reusing (EOR & EGR) and storage. The study evaluates the state of the CO2 capture technology development, availability and investment cost of the different technologies, with few operation cost analysis possible at the time. Main findings and the abatement potential for coal applications are presented. DOE, NETL, MIT, European universities and research institutions, key technology enterprises and utilities, and key technology suppliers are the main sources of this study. A vision of the technology deployment is presented.

Plant regeneration from an endangered valuable cork oak tree by somatic embryogenesis.

Among the several applications of in vitro tissue culture techniques, the conservation of plant germplasm is one of the most widely used. The cork oak is one of the principal tree species in the Western Mediterranean región. Within this área, the Balearic Islands are considered to be a glacial refuge, and therefore a reservoir of genetic resources. A singular tree has been found in the small Minorca Island population. The haplotype of this tree is of Tyrrhenian origin, showing a past link between Minorca and Sardinia. Moreover, this tree do not bear a deletion within an ITS from ribosimic nuclear DNA, which is fairly common in many populations of this species, and indicates that ir may be the descendant of a very ancient population. This tree is currently in a precarious condition, and it has not produced acorns in the last years. Hence there is a clear need of vegetative propagation to conserve this genotype. We have previously developed methods to clone adult cork oak tres by somatic embryogenesis, and therefore the aim of the present work was to clone this singular tree. There braches from the corwn were collected in November 2004, and methods previously described were carried out. By February 2005 somatic embryogenesis was obtained from leaves of the tree with percentages on induction ranging from 17 to 54% depending on the branch, which may show a novel source of variation that requires further study. Spontaneously matured somatic embryos germinated at 46% in average, and the first somatic seedlings from the Alfavaret's cork oak tree were obtained. Therefore, this study shows one of the most relevant applications of somatic embryogenesis: the plant regeneration of valuable genotypes for the in situ and ex situ conservation of forest genetic resources.

Space-time Measurements of Oceanic Sea States

Stereo video techniques are effective for estimating the space–time wave dynamics over an area of the ocean. Indeed, a stereo camera view allows retrieval of both spatial and temporal data whose statistical content is richer than that of time series data retrieved from point wave probes. We present an application of the Wave Acquisition Stereo System (WASS) for the analysis of offshore video measurements of gravity waves in the Northern Adriatic Sea and near the southern seashore of the Crimean peninsula, in the Black Sea. We use classical epipolar techniques to reconstruct the sea surface from the stereo pairs sequentially in time, viz. a sequence of spatial snapshots. We also present a variational approach that exploits the entire data image set providing a global space–time imaging of the sea surface, viz. simultaneous reconstruction of several spatial snapshots of the surface in order to guarantee continuity of the sea surface both in space and time. Analysis of the WASS measurements show that the sea surface can be accurately estimated in space and time together, yielding associated directional spectra and wave statistics at a point in time that agrees well with probabilistic models. In particular, WASS stereo imaging is able to capture typical features of the wave surface, especially the crest-to-trough asymmetry due to second order nonlinearities, and the observed shape of large waves are fairly described by theoretical models based on the theory of quasi-determinism (Boccotti, 2000). Further, we investigate space–time extremes of the observed stationary sea states, viz. the largest surface wave heights expected over a given area during the sea state duration. The WASS analysis provides the first experimental proof that a space–time extreme is generally larger than that observed in time via point measurements, in agreement with the predictions based on stochastic theories for global maxima of Gaussian fields.

Air Traffic Management - Historic background and present situation

Ponencia invitada sobre gestion de trafico aereo en el curso de verano de la UPM Research in Decision Support Systems for future Air Traffic Management

Present and Future of Photovoltaic Solar Electricity

Ponencia Invitada presentada en el IEEE Region 8 Student Branch and GOLD Congress

El sistema de grabación y reproducción sonora ambiofónico

Este proyecto fin de carrera trata del sistema de grabación y reproducción sonora ambiofónico, destacar que este sistema y la tecnología que emplea es de dominio público. La ambiofonía se basa en un amalgama de investigaciones recientes y de los ya bien sabidos principios psicoacústicos y binaurales. Estos avances han expandido nuevas fronteras en lo concerniente a la grabación y reproducción de audio, así como de presentar al oyente un campo sonoro a la entrada de sus oídos lo más parecido posible al campo sonoro al que se expondría al oyente en el momento y lugar de la toma de sonido, es decir, reconstruye un campo sonora binaural. Este sistema ha podido desarrollarse, de una manera bastante satisfactoria, gracias a todos los estudios y textos anteriores en materia de psicoacústica y del mecanismo de escucha humano. Otro factor gracias al cual es posible y asequible, tanto el desarrollo como el disfrute de esta tecnología, es el hecho que en nuestros días es muy económico disponer de ordenadores lo suficientemente potentes y rápidos para realizar el procesado de señales que se requiere de una manera bastante rápida. Los desarrolladores de dicha tecnología han publicado diversos documentos y archivos descargables de la red con aplicaciones para la implementación de sistemas ambiofónicos de manera gratuita para uso privado. El sistema ambiofónico se basa en la combinación de factores psicoacústicos ignorados o subestimados y lo ya sabido sobre las propiedades acústicas de salas, tanto de salas en las que tienen lugar las ejecuciones musicales (auditorios, teatros, salas de conciertos...), como de salas de escucha (salones de domicilios, controles de estudios...). En la parte práctica del proyecto se van a realizar una serie de grabaciones musicales empleando tanto técnicas estereofónicas tradicionales como ambiofónicas de grabación con el fin de describir y comparar ambas técnicas microfónicas. También servirá para estudiar hasta que punto es favorable subjetivamente para el oyente el hecho de realizar la toma de sonido teniendo en cuenta las propiedades del sistema de reproducción ambiofónico. Esta comparación nos dará una idea de hasta donde se puede llegar, en cuanto a sensación de realidad para el oyente, al tener en cuenta durante el proceso de grabación efectos como la respuesta del pabellón auditivo del oyente, la cual es única, y que posteriormente la diafonía interaural va a ser cancelada mediante un procesado digital de señal. ABSTRACT. This final project is about the ambiophonic recording and playback system, note that this system and the technology it uses is of public domain. Ambiophonics is based on an amalgam of recent research and to the well known and binaural psychoacoustic principles. These advances have expanded new frontiers with regard to the audio recording and playback, as well as to present the listener a sound field at the entrance of their ears as close as possible to the sound field that would the listener be exposed to at the time and place of the mucial interpretation, so we can say that ambiophonics reconstructs a binaural sound field . This system has been developed, in a fairly satisfactory way, thanks to all the studies and previous texts on psychoacoustics and human listening mechanism. Another factor by which it is possible and affordable, both the development and the enjoyment of this technology, is the fact that in our days is inexpensive to usres to own computers that are powerful and fast enough to perform the signal processing that is required in a short time. The developers of this technology have published several documents and downloadable files on the network with applications for ambiophonics system implementation for free. Ambiophonics is based on a combination of factors ignored or underestimated psychoacousticly and what is already known about the acoustic properties of rooms, including rooms where musical performances take place (auditoriums, theaters, concert halls...), and listening rooms (concet halls, studios controls...). In the practical part of the project will be making a series of musical recordings using both traditional stereo recording techniques and recording techiniques compatible with ambiophonics in order to describe and compare both recording techniques. It will also examine to what extent is subjectively favorable for the listener the fact of considering the playback system properties of ambiophonics during the recording stage. This comparison will give us an idea of how far can we get, in terms of sense of reality to the listener, keeping in mind during the recording process the effects introduced by the response of the ear of the listener, which is unique, and that the subsequently interaural crosstalk will be canceled by a digital signal processing.

Dinámica vegetal desde el tardiglaciar en la cuenca del Duero: interacciones con clima, fuego e impacto humano

La cuenca del Duero constituye un vasto territorio ibérico cuyo paisaje se encuentra actualmente muy alterado por la mano del hombre y es prácticamente imposible localizar alguna manifestación de su cubierta vegetal natural. Aunque la historia de la vegetación en los sectores central y oriental es relativamente bien conocida, en su mitad occidental los registros paleoecológicos estudiados hasta la fecha son prácticamente inexistentes. Esto hace que se desconozca la respuesta de la vegetación a las diferentes oscilaciones climáticas que se han producido desde el Último Máximo Glaciar, cuál fue el impacto de las diferentes culturas sobre el medio, cuándo se produjo una alteración profunda de la vegetación natural y cuál ha sido la historia de los incendios. Este último aspecto, el papel e importancia de los incendios, reviste un especial interés en la península Ibérica dada su situación geográfica y climática dentro de la cuenca Mediterránea, donde el fuego es un factor ecológico de primer nivel. Las distintas técnicas paleoecológicas son las más adecuadas para abordar todas estas preguntas. De este modo, los avatares de la vegetación a través del tiempo se han reconstruido mediante el análisis polínico y de macrofósiles, el impacto humano se ha trazado utilizando indicadores polínicos ligados a actividades antrópicas y esporas de hongos coprófilos, estudiándose los incendios a partir del registro de partículas microscópicas de carbón. La alta resolución temporal y taxonómica alcanzada en estos análisis, así como la amplia superficie abarcada con los yacimientos estudiados, hacen que la información obtenida sea altamente detallada y complete el conocimiento que se tiene sobre la cuenca del Duero. El Tardiglaciar se registra por primera vez en la Meseta Norte Ibérica en la secuencia de Ayoó de Vidriales, donde una vegetación esteparia prácticamente desarbolada domina durante los periodos fríos. Durante el interestadial Bølling/Allerød la expansión forestal (pinos, abedules) fue muy leve y tardía y fue interrumpida bruscamente por el Dryas Reciente. Al final del Dryas Reciente o al inicio del Holoceno se produjo una acusada y rápida expansión de los bosques. Esta dinámica sugiere que no hubo refugios glaciares importantes en esta zona de la Meseta durante el “Mystery Interval”, aparentemente el periodo más frío y seco. Los incendios fueron muy escasos, aumentando de forma muy brusca al inicio del Holoceno por el aumento de biomasa y las condiciones relativamente cálidas y secas. A partir de los registros de Ayoó y El Maíllo se consolida la importancia del gradiente oceanicidad-continentalidad en el Sistema Central y la Meseta Norte, que se manifiesta principalmente en la dominancia más prolongada de los pinares hacia el interior. Además, otra de las principales contribuciones de la presente tesis es proporcionar evidencia sobre la sucesión de distintos tipos de bosques en el noroeste de la Meseta, precisando el marco temporal en el que suceden. Así, se ha constatado que hubo un máximo desarrollo del bosque caducifolio durante el Holoceno medio en Ayoó de Vidriales y una baja incidencia del fuego que sugieren que el clima fue más húmedo que en el Holoceno inicial. El estudio de macrofósiles leñosos ha permitido detectar procesos que con el análisis polínico habrían pasado desapercibidos, como la persistencia hasta el Holoceno final de Pinus sylvestris en la sierra del Teleno y la sustitución de P. sylvestris por P. pinaster en la sierra de Francia durante el Holoceno inicial. También el estudio de los carbones procedentes de los arenales de Tierra de Pinares han proporcionado la prueba definitiva de la naturalidad de los pinares de P. pinaster. El impacto humano se detecta temprano en las secuencias del oeste de la cuenca del Duero, durante el Neolítico, aunque ha sido mucho más acusado desde la Edad del Hierro (ca 2700-2500 años cal BP). Para la detección del impacto humano temprano ha sido clave el análisis de esporas de hongos coprófilos, cuyo análisis fue incorporado en la secuencia de Ayoó de Vidriales. Una de sus principales consecuencias fue el establecimiento de comunidades de matorral (brezales, piornales) sobre amplias extensiones del occidente de la cuenca del Duero, vinculado al recrudecimiento de los regímenes de incendios. A pesar de que los incendios han sido ecológicamente importantes desde el inicio del Holoceno, los cambios introducidos por el hombre en sus regímenes sobrepasaron la resiliencia de los bosques originales, lo cual condujo a su sustitución sostenida por matorrales. ABSTRACT The Duero Basin constitutes a vast Iberian territory which is currently strongly disturbed due to human activities, so it is very difficult to find any remnant of the natural vegetation. Vegetation history for the eastern and western sectors of the Basin is relatively well-known but, in contrast, there is an almost complete lack of palaeoecological record in the western area. Consequently, there exists a profound ignorance about vegetation responses to the climatic oscillations occurred since the Last Glacial Maximum, the environmental impact of the different cultures, when a severe disturbance of the natural vegetation took place and fire history. The last question, the role and importance of fire, has a special interest in the Iberian Peninsula due to its geographic and climatic framework, the Mediterranean Basin, where fire is a major ecological factor. The diverse palaeoecological techmiques are the most suitable tools to address all these questions. Thus, vegetation shifts through time have been reconstructed using pollen and macrofossil analyses, human impact has been tracked by means of anthropogenic pollen indicators and dung fungal spores, while fire history has been studied from the quantification of microscopic charcoal particles. The high taxonomic and time resolution attained along with the extensive surface covered by the studied sites provide detailed information very useful to complete the knowledge on landscape dynamics in the Duero Basin. The Lateglacial is recorded for the first time in the Northern Iberian Plateau in the sequence from Ayoó de Vidriales, showing that almost treeless steppic vegetation dominated during the cold periods. Tree expansion (pines, birches) was late and slight during the Bølling/Allerød interstadial and was sharply interrupted by the Younger Dryas (YD) climatic reversal. By the end of the YD or the onset of the Holocene, a rapid forest expansion occurred. This forest dynamics suggests an absence of important glacial refugia for trees in this area of the Plateau during the Mystery Interval, apparently the coldest and driest period. Fires were fairly rare, increasing abruptly at the beginning of the Holocene due to the relatively warm and dry climate and the accumulation of biomass. The records from Ayoó and El Maíllo reinforce the role of the oceanicity-continentality gradient in the vegetation history of the Iberian Central Range and the Iberian Northern Plateau, reflected mainly in the longer dominance of pine forests towards inland areas. Further, another important contribution of this PhD Thesis is providing evidence on the succession of different forest types in the northestern fringe of the Plateau, specifying the chronological framework. A maximum of deciduous forest development and low fire activity have been detected in Ayoó de Vidriales during the mid-Holocene, suggesting that climate was wetter than in the early Holocene. The study of woody macrofossils has allowed detecting processes which would have remained unnoticed using pollen analysis alone, such as the persistence of Pinus sylvestris until the late Holocene in the Teleno Mountains and the early Holocene replacement of P. sylvestris with P. pinaster in the sierra de Francia range. The study of macroscopic charcoal fragments from palaeosols of the Tierra de Pinares has also provided the definitive proof of naturalness for the P. pinaster stands gorwing over this area at present. Early human impact, during the Neolithic, has been detected in the sequences from the western sector of the Duero Basin, although human disturbance has been more severe from the Iron Age onwards (ca 2700-2500 cal yr BP). The analysis of coprophilous fungi incorporated in the sequence of Ayoó de Vidriales has played a key role in recognizing that early human impact. One of the main consequences of human disturbance was the establishment of shrubland communities (heaths, brooms) over huge areas of the western Duero Basin, linked to severe and/or frequent fires. Despite fires has been ecologically important since the onset of the Holocene, human-induced changes in fire regimes have exceeded the resilience of original forests leading to a sustained replacement with shrublands.

Modelling Pinus pinea forest management to attain natural regeneration under present and future climatic scenarios

Natural regeneration-based silviculture has been increasingly regarded as a reliable option in sustainable forest management. However, successful natural regeneration is not always easy to achieve. Recently, new concerns have arisen because of changing future climate. To date, regeneration models have proved helpful in decision-making concerning natural regeneration. The implementation of such models into optimization routines is a promising approach in providing forest managers with accurate tools for forest planning. In the present study, we present a stochastic multistage regeneration model for Pinus pinea L. managed woodlands in Central Spain, where regeneration has been historically unsuccessful. The model is able to quantify recruitment under different silviculture alternatives and varying climatic scenarios, with further application to optimize management scheduling. The regeneration process in the species showed high between-year variation, with all subprocesses (seed production, dispersal, germination, predation, and seedling survival) having the potential to become bottlenecks. However, model simulations demonstrate that current intensive management is responsible for regeneration failure in the long term. Specifically, stand densities at rotation age are too low to guarantee adequate dispersal, the optimal density of seed-producing trees being around 150 stems·ha−1. In addition, rotation length needs to be extended up to 120 years to benefit from the higher seed production of older trees. Stochastic optimization confirms these results. Regeneration does not appear to worsen under climate change conditions; the species exhibiting resilience worthy of broader consideration in Mediterranean silviculture.

Does high speed rail compete fairly with other transportation modes? Madrid-Barcelona case study

Transportation modes produce many external costs such as congestion, accidents, and environmental impacts (pollution, noise and so on). From the microeconomic theory it is well known that in order to maximize social welfare, transportation modes should internalize the marginal costs they produce. Allocative efficiency is achieved when all transportation modes are priced at their social marginal cost. The objective of this research is to evaluate to what extent different passenger transport modes internalize their social marginal costs. This analysis is important since it affects the competitiveness of the different transport modes for a given OD pair. The case study analyzed is the corridor Madrid-Barcelona in Spain and the different transport modes have been considered (cars, buses, high-speed train and air). The research calculates the marginal social cost per user for each transportation mode, and it compares it with the average fare—allowing for the effect of discriminatory taxes—currently paid by the users. The external costs are calculated according to the guidelines established by the European Union. The gap between the marginal social cost and the price paid by users will provide the extra cost per passenger that each transport mode should have to pay for internalizing the external cost it produces. The research shows that external costs already produced by road and air transport modes are much higher than those produced by rail. However, the results show that road transport already internalizes every external costs it produces because users pay high fuel taxes. In other words, although rail transportation produces lower external costs, road transportation pays more than it should on the basis of the social marginal costs. The results of this work might be of help for Europ ean policy actions to be undertaken in the future.

Caracterización de los parámetros de resistencia al corte y erosionabilidad del suelo para su aplicación en los problemas de estabilidad de taludes en obras lineales

La tesis se organiza en un volumen de Memoria integrada por once capítulos que constituyen el cuerpo de la tesis y otro volumen de Apéndices titulado “Caracterización geotécnica de Base de los suelos de España” que reúne en forma de cuadros las características de textura, permeabilidad, humedad-succión, erosionabilidad y resistencia al corte de los cuarenta y dos perfiles de suelos representativos de los tipos del Mapa de suelos De España. Estos cuadros han sido elaborados originalmente por la doctorando durante sus estudios para la obtención del DEA de la Suficiencia Investigadora, excepto los de resistencia al corte que lo han sido también por la doctorando de forma original, pero ya en la etapa de redacción de la tesis. En el Capítulo 1 “Introducción” se describe la motivación, antecedentes, alcance y contenido de la tesis, ordenado según el índice que en él se incluye. Los Capítulos 2 “Meteorización, 3 “Balance Hídrico” y 4 “Humedades características” constituyen el “estado del arte” en el momento actual de los temas de geotecnia ambiental relacionados con la degradación de la superficie terrestre y la estabilidad de taludes. El Capítulo 2, tras matizar algunas generalidades, aporta elementos para la cuantificación de la alteración de rocas como el “índice climático de Weinert” y de la erosión de suelos como la “ecuación universal de pérdida de suelo (U.S.L.E.)” El Capítulo 3, partiendo de los fenómenos de precipitación y evapotranspiración, plantea el balance hídrico en vertientes con instrumentos para evaluar la infiltración y la escorrentía, conceptos imprescindibles para adentrarse en los de resistencia y erosionabilidad del conjunto suelo-agua. En los Apéndices A1 y A2, se recogen valores de coeficientes de infiltración en condiciones saturadas y no saturadas de los perfiles de suelos del Mapa de España. El Capítulo 4 se dedica al estudio de este conjunto suelo-agua con la definición de conceptos que lo caracterizan, basados en la relación entre los contenidos de ambos elementos o “humedad”, sus valores máximos y mínimos y la forma en la que es retenida el agua por el suelo. Este capítulo acaba con el concepto de “Curva característica Suelo-Agua/Soil Water Characteristic curve (SWCC)”, que liga el contenido de agua de un suelo con la tensión a la que está retenida (uauw) “succión” o con su expresión más usual “pF”. En el Apéndice A 3 se adjuntan las SWCC de los perfiles de suelos del Mapa de suelos de España. En el Capítulo 5 “Resistencia al corte de los suelos”, se detalla la influencia que tienen sobre la resistencia de los suelos factores como el paso del tiempo, el contenido de humedad y la presencia y tipo de vegetación en la superficie del suelo estudiado. El Capítulo 6 “Evaluación de la erosión”, analiza el factor de erosionabilidad del suelo “factor K” de la U.S.L.E., su evaluación en función de la textura, estructura y permeabilidad del suelo, con la estimación hecha para los cuarenta y dos perfiles de suelos del Mapa de España, contenida en el Apéndice 4. En el Capítulo 7 “Metodología de diseño” se hacen en su primera parte unas consideraciones geoambientales de diseño aplicables al estudio de los problemas de inestabilidades en taludes. La segunda parte constituye el núcleo de la tesis con la propuesta de “estimación de los parámetros de resistencia al corte del suelo”, consecuente con las teorías y metodología de análisis expuesta en los capítulos anteriores. En el Apéndice A 5 se presentan los valores de los parámetros coulombianos de resistencia al corte, ”c y Ф” estimados según la caracterización climática a partir del índice de Thornthwaite, en condicionesde diseño para humedades naturales máxima y mínima de los cuarenta y dos perfiles de suelos del Mapa de suelos de España. El Capítulo 8 “Aplicación a casos reales” se considera de gran interés al constituir una auténtica continuación de la segunda parte del capítulo anterior, desarrollando la metodología expuesta en él a cuatro problemáticas de infraestructuras de obras lineales, relacionadas con problemas de erosión y deslizamientos en taludes. El Capítulo 9 “Ensayos de referencia” se incluye como punto de apoyo (referencia) a las teorías expuestas, valorando la idoneidad de los tipos de ensayos y tipos de suelos seleccionados (Laboratorio de Geotecnia del CEDEX y Laboratorio Hong-Kong University of Science and Technology), utilizados para la obtención, por correlaciones deducidas, de las curvas SWCC de los perfiles de suelos del Mapa de España, incluídas en el Apéndice A 3, como se ha citado antes. En el Capítulo 10 “Conclusiones y Futuras Líneas de Investigación”se apuntan en primer lugar unas conclusiones que, a juicio de la doctorando, se pueden extraer con interés de esta tesis y a continuación se esbozan unas posibles líneas de investigación, fundamentalmente de tipo experimental, que complementarían los avances derivados de esta tesis o podrían esclarecer y abrir nuevas interpretaciones de los fenómenos naturales de erosión y estabilidad de taludes en los que ésta se ha centrado. Finalmente, en el Capítulo 11 “Bibliografía” se han reunido 328 referencias que reflejan una visión amplia y bastante completa del tema tratado, obtenida complementando las de tesis anteriores sobre esta singular materia (“Efecto estabilizador de la vegetación en taludes”, L Fort 1975 y “Determinación de las características de fricción en el contacto suelo-geotextil a diferentes succiones, mediante equipos de laboratorio singulares”, E Asanza 2009), con propias de la doctorando (9) y las consideradas de mayor interés de los últimos Congresos sobre Suelos no saturados,”Unsat 95”, “Unsat 2002” y “Unsat 2011” entre otros. ABSTRACT The thesis is organized in a volume of Memory composed of eleven chapters that make up the body of the thesis and other Appendices volume entitled "Geotechnical characterization of basis of the soils of Spain" that combines the characteristics of texture, permeability, moisture-suction, erosionability, and shear strength of forty-two profiles of soils representative of the types of the soil of Spain map in the form of pictures. These pictures have been produced originally by the student during their studies to obtain the DEA of the research, except those of the shear strength, also been done by the PhD student in an original way, but already at the stage of drafting of the thesis. Chapter 1 "Introducción" describes the motivation, background, scope and content of the thesis, ordered according to the index that is included. The Chapters: 2 "Weathering, 3 “Water Balance” and 4 “moisture characteristics" are the "State of the art" at the present time of geotechnical environmental issues related to the degradation of the Earth's surface and the slope stability. Chapter 2 after clarify some general information, provides elements for the quantification of the alteration of rocks as "Weinert climate index" and soil erosion as the "universal equation of loss of soil (U.S.L.E.)" Chapter 3, on the basis of the phenomena of precipitation and evapotranspiration, raises the water balance in sheds with instruments to evaluate infiltration and runoff, essential concepts into the resistance and erosionability water-soil joint. Values of soils coefficients of infiltration in saturated and unsaturated conditions from the Spain map of profiles are collected in the Appendices A1 and A2. Chapter 4 is dedicated to the study of this joint “soil-water”, with the definition of concepts that characterize it, based on the relationship between the contents of both elements or “moisture”, their maximum and minimum values and the way in which water is retained by the soil. This chapter ends with the concept of “Soil Water Characteristic curve (SWCC)", which linked the water content of a soil with the stress that it is retained (ua-uw) "suction" or its expression more usual "pF". The SWCC of the profiles of soils of the Spain soils Map are attached in the Appendix 3. In Chapter 5 “Soils shear strength”,is detailed the influence that they have on the resistance of soils factors such as the passage of time, the content of moisture and the presence and type of vegetation on the surface of the studied soil. Chapter 6 "Assessment of erosion", analyses the soil erodibility factor "Kfactor" of the U.S.L.E., its evaluation based on texture, structure and permeability of the soil, with the estimate for forty-two profiles of soils on the Spain Soils Map, contained in Appendix 4. Chapter 7 "Design methodology" some considerations are made in the first part geo-environmental design applicable to the study of the problems of instabilities in slopes. The second part constitutes the core of the thesis with the proposal of “estimation of parameters of shear strength”, of the soils consistent with theories and analytical methodology outlined in the previous chapters. Appendix A 5 presents the values of the coulombians parameters of shear strength, "c and Ф" according to the characterization of climate from the index of Thornthwaite, in design for natural moisture conditions maximum and minimum of forty-two profils of Spain Soils Map Chapter 8 "Application to real cases" is considered of great interest to constitute a true continuation of the second part of the previous chapter, developing the methodology exposed it to four problems of civil-works infrastructure, related to problems of erosion and landslides in slopes. Chapter 9 "Tests of reference" is included as point of support (reference) to the theories exposed, assessing the suitability of the types of tests and types of selected soils (Geotechnical laboratory of CEDEX and laboratory Hongkong University of Science and Technology), used to obtain, by deduced correlations, of curves SWCC of soils profiles on the Spain Soils Map, included in Appendix A. 3, as it was mentioned before. Chapter 10 "Conclusions and future research lines" are running first conclusions which, in the opinion of the candidate, can be extracted with interest of this thesis, and then, it outlines some possible lines of research, mainly experimental, which would complement the advances arising from this thesis or could clarify and open new interpretations of natural phenomena of erosion and slope stability in which it has focused. Finally, in Chapter 11 "Bibliography" 328 references have been included which reflect a broad and fairly comprehensive view of the subject matter, obtained complementing those of the previous theses on this singular issue ("Vegetation stabilizing effect on slopes", L Fort 1975, and "Determination of the characteristics of friction in the contact soil-geotextile to different-suctions, through special laboratory equipment", E Asanza 2009) with some of them from of the candidate (9) and the others from of the considered as the most interesting of recent conferences on unsaturated soils, "Unsat 95", "Unsat2002" and "Unsat 2011" among others.

Present and future of photovoltaic solar electricity

Introduction Crystalline silicon technology, from quartz to system Economical and environmental issues Alternatives to cristalline silicon technology Conclusions

Cálculo de pilas con aparatos de apoyo tipo POT y tablero con punto fijo

In recent years a great number of high speed railway bridges have been constructed within the Spanish borders. Due to the demanding high speed trains route's geometrical requirements, bridges frequently show remarkable lengths. This fact is the main reason why railway bridges are overall longer than roadway bridges. In the same line, it is also worth highlighting the importance of high speed trains braking forces compared to vehicles. While vehicles braking forces can be tackled easily, the railway braking forces demand the existence of a fixed-point. It is generally located at abutments where the no-displacements requirement can be more easily achieved. In some other cases the fixed-point is placed in one of the interior columns. As a consequence of these bridges' length and the need of a fixed-point, temperature, creep and shrinkage strains lead to fairly significant deck displacements, which become greater with the distance to the fixed-point. These displacements need to be accommodated by the piers and bearings deformation. Regular elastomeric bearings are not able to allow such displacements and therefore are not suitable for this task. For this reason, the use of sliding PTFE POT bearings has been an extensive practice mainly because they permit sliding with low friction. This is not the only reason of the extensive use of these bearings to high-speed railways bridges. The value of the vertical loads at each bent is significantly higher than in roadway bridges. This is so mainly because the live loads due to trains traffic are much greater than vehicles. Thus, gravel rails foundation represents a non-negligible permanent load at all. All this together increases the value of vertical loads to be withstood. This high vertical load demand discards the use of conventional bearings for excessive compressions. The PTFE POT bearings' higher technology allows to accommodate this level of compression thanks to their design. The previously explained high-speed railway bridge configuration leads to a key fact regarding longitudinal horizontal loads (such as breaking forces) which is the transmission of these loads entirely to the fixed-point alone. Piers do not receive these longitudinal horizontal loads since PTFE POT bearings displayed are longitudinally free-sliding. This means that longitudinal horizontal actions on top of piers will not be forces but imposed displacements. This feature leads to the need to approach these piers design in a different manner that when piers are elastically linked to superstructure, which is the case of elastomeric bearings. In response to the previous, the main goal of this Thesis is to present a Design Method for columns displaying either longitudinally fixed POT bearings or longitudinally free PTFE POT bearings within bridges with fixed-point deck configuration, applicable to railway and road vehicles bridges. The method was developed with the intention to account for all major parameters that play a role in these columns behavior. The long process that has finally led to the method's formulation is rooted in the understanding of these column's behavior. All the assumptions made to elaborate the formulations contained in this method have been made in benefit of conservatives results. The singularity of the analysis of columns with this configuration is due to a combination of different aspects. One of the first steps of this work was to study they of these design aspects and understand the role each plays in the column's response. Among these aspects, special attention was dedicated to the column's own creep due to permanent actions such us rheological deck displacements, and also to the longitudinally guided PTFE POT bearings implications in the design of the column. The result of this study is the Design Method presented in this Thesis, that allows to work out a compliant vertical reinforcement distribution along the column. The design of horizontal reinforcement due to shear forces is not addressed in this Thesis. The method's formulations are meant to be applicable to the greatest number of cases, leaving to the engineer judgement many of the different parameters values. In this regard, this method is a helpful tool for a wide range of cases. The widespread use of European standards in the more recent years, in particular the so-called Eurocodes, has been one of the reasons why this Thesis has been developed in accordance with Eurocodes. Same trend has been followed for the bearings design implications, which are covered by the rather recent European code EN-1337. One of the most relevant aspects that this work has taken from the Eurocodes is the non-linear calculations security format. The biaxial bending simplified approach that shows the Design Method presented in this work also lies on Eurocodes recommendations. The columns under analysis are governed by a set of dimensionless parameters that are presented in this work. The identification of these parameters is a helpful for design purposes for two columns with identical dimensionless parameters may be designed together. The first group of these parameters have to do with the cross-sectional behavior, represented in the bending-curvature diagrams. A second group of parameters define the columns response. Thanks to this identification of the governing dimensionless parameters, it has been possible what has been named as Dimensionless Design Curves, which basically allows to obtain in a reduced time a preliminary vertical reinforcement column distribution. These curves are of little use nowadays, firstly because each family of curves refer to specific values of many different parameters and secondly because the use of computers allows for extremely quick and accurate calculations.

On the Analytical Approach to Present Engineering Problems: Photovoltaic Systems Behavior, Wind Speed Sensors Performance, and High-Speed Train Pressure Wave Effects in Tunnels

At present, engineering problems required quite a sophisticated calculation means. However, analytical models still can prove to be a useful tool for engineers and scientists when dealing with complex physical phenomena. The mathematical models developed to analyze three different engineering problems: photovoltaic devices analysis; cup anemometer performance; and high-speed train pressure wave effects in tunnels are described. In all cases, the results are quite accurate when compared to testing measurements.