Aproximación a la arquitectura popular en la Mancha Baja. El caso de Manzanares

La tesis se compone de una primera parte introductoria, en la que se recogen las distintas opiniones y definiciones de la arquitectura “popular”, el estado de la cuestión, comentando los artículos y publicaciones realizados sobre la Mancha. La segunda parte profundiza en aspectos generales previos al análisis edificatorio central de la tesis, con los siguientes capítulos: -Estudio de los condicionantes físicos, históricos, socio-económicos y culturales de la comarca de la Mancha Baja. Acotando el territorio. -Una visión general sobre la arquitectura tradicional de la provincia de Ciudad Real, por comarcas. -Un estudio de las distintas tipologías edificatorias tradicionales, con ejemplos en la comarca manchega. -El análisis de materiales constructivos, elementos y sistemas utilizados en las construcciones tradicionales en la Mancha Baja. La tercera parte, desde la premisa de la representación gráfica, apoyado en un anexo con dibujos de ciento treinta y siete edificios populares de Manzanares y comarca, estudia: El trazado urbano y las casas de Manzanares; desde los levantamientos de plantas, alzados y secciones, emplazamiento en la manzana y fotografías, se realiza una descripción completa, con noventa y seis ejemplos. Además de llegar a las conclusiones derivadas del análisis de estas edificaciones, los objetivos pretendidos con este estudio serían también: Realizar un primer trabajo aproximativo, desde la visión arquitectónica, de la arquitectura tradicional manchega. Recopilar toda la información existente que pueda relacionarse con la arquitectura popular en la comarca, y citar los escritos y publicaciones de referencia para posteriores estudios. Se estudia la geomorfología, el clima, el territorio, la economía, la sociología, etc…, para obtener una información clave, además de los materiales, técnicas constructivas y morfología de las edificaciones. Se destaca el apartado de los edificios preindustriales tradicionales, como molinos de viento, de agua, palomares, pósitos y bodegas con el análisis de varios ejemplos, por su importante presencia en las poblaciones. Por último se desarrolla un amplio bloque sobre bibliografía de arquitectura popular, la consultada y la general. La arquitectura popular de la mancha baja es tapial cubierto de teja árabe, cerrada al exterior, pero abierta a grandes patios, de planta baja y cámaras altas, con elementos auxiliares de protección y acceso, que revisten la aparente simplicidad volumétrica de estos complejos, viviendas-almacén. Con un complejo programa tanto agrícola como doméstico. De gran protección frente al clima, con escasa decoración, esquemas espaciales primitivos y con mayor envergadura estructural en las dependencias agropecuarias. Una arquitectura que mezcla el uso doméstico y el productivo, pero que al evolucionar aumenta su diferenciación. Edificios que mantienen las mismas cualidades estéticas, repitiendo formas y volúmenes, pero de peculiares configuraciones espaciales, se repiten los materiales y técnicas constructivas, así como elementos arquitectónicos con pocas variaciones, pero no existen dos conjuntos similares. No podemos utilizar un ejemplo como modelo de casa manchega. Evoluciona de la casa bloque, básica y primitiva, con ejemplos escasos en las poblaciones más deprimidas, a la casa compleja, donde se separan con claridad las dependencias agropecuarias de las vivideras. Evoluciona de una casa rural, con los mismos esquemas, ya se ubique en el campo o en núcleos de población, a la casa urbana, entre medianerías, en la que se puede encontrar una transformación paralela, desarrollándose programas domésticos, más especializados, mezclados con arquitecturas cultas, con programas que reflejan las nuevas necesidades de la sociedad urbana del siglo XX. ABSTRACT The thesis is composed of a first part that is collected as introducing different views and definitions of popular architecture, the state of affairs, commenting on articles and publications carried out at the Mancha. The second part explores general issues before the main urban analysis of the thesis, with the following chapters: -A study of the geographic, historical, socio-economic and cultural conditions of the region of the Mancha Baja. Delimiting the territory -A tour with an overview of the province of Ciudad Real by regions. -A study of the different traditional building types, with examples in the region from the Mancha. -The Analysis of building materials, components and systems used in traditional buildings in the Mancha Lower The third part studies from the premise of the drawing: The urban planning of the towns to study and houses of Manzanares, from the execution of plans, elevations and sections, sites in the blocks, old photographs, a full description is made, covering a wide range of examples, highlighting the “evolution during the twentieth century, in its last quarter, buildings of popular character “, which is the ultimate aim of the thesis. In addition to reaching the conclusions drawn from the analysis cards of these buildings, the objectives pursued with this study would be also: This paper is the realization of a first rough work from the architectural vision of traditional architecture from the Mancha. To Search a work method for approaching the popular architecture, other than those made so far by other studies of historians, engineers and sociologists, with the graphical representation and the buildings would be studied like living organisms that evolve over time. To collect all the current information that It can be able to connect itself with the popular architecture in the region, and cite the writings and publications of reference for future studies. Geomorphology, climate, topography of the place is studied to obtain a key information about materials, construction techniques and morphology of the buildings. A section is opened to study the case of traditional industrial buildings like windmills, flour mill, pigeon lofts, public granary, threshing floor and cellars with the analysis of several examples; its importance is highlighted in the urban plan of the town. Finally a large block of popular literature on architecture is developed, consulted for work is distinct from the general existing on the subject. The popular architecture from the Mancha is built of rammed earth and roofs inclined of Arabic tiles, the buildings are closed to the outside, but they are open around large courtyards, and ground floor and camera high, with additional elements of protection, they are opened to patios. The manor has a complex program on agricultural and domestic activity. Large climate protection, poor decoration, quite primitive in shaping living spaces, and more structural scale in storage and processing units of agriculture-related products, mainly wine, cereal and to a lesser extent oil. These architecture combines the domestic and productive use, but which will evolve and they are distinguishing, both enclosed spaces such as courtyards. The buildings keep the same aesthetic qualities because they repeat shapes and volumes, but they maintain their spatial configuration individually; the materials, building techniques and architectural elements are repeated with slight variations, but there aren´t two identical houses. This architecture evolved from the block, basic and primitive house, with few examples in the most deprived towns, to the complex house, where agricultural units are clearly separated of domestic rooms. It developed from a country house (with the same patterns) whether it is located in the countryside or in the towns, to an urban house, in which we can find a parallel transformation, developing domestic programs, more specialized, mixed with cultivated architectures, with programs that reflect the changing needs of urban society of the twentieth century.

Impact testing in melon (Cucumis melo L.)

The application of Rheology to study biological systems is a new and very extensive matter, in which melon is absolutely unknown. The goal of this work is to determine some physical characteristics of this fruit, immediately after harvest and during its conservation in cold storage. Portugal and Spain are the most interested countries in these studies, as they are important producers of melon. The varieties Branco da Leziria and Piel de sapo were chosen because they are the most popular in both countries. The fruit were studied on the day they were harvested, and then were conserved in cold storage in the "Instituto del Frio" in Madrid, and they were periodically tested again. Thus during seven days the same fruits, and new fruits, were picked up and tested. On the first day of testing we had 20 fruits to study and at the end of the testing period we had used 80 fruits. The results from the non-destructive impact test were very significant and they may contribute to standardise methods to measure fruit maturity. These results were confirmed by those obtained from compression tests. The results obtained during the Impact tests with melon were similar to those obtained previously with other fruits. There is a close relationship between the results of the Impact tests and Compression tests. Tests like Impact and Compression can be adapted to melon, varieties 'Piel de Sapo" and 'Branco de Leziria', allowing us to continue further work with this species. The great number of data obtained during performance of the tests allowed us to go on with this work and to contribute to standardise methods of measurement and expression of characteristics of a new biological product. During the "Impact damage in fruits and vegetables" workshop, held in Zaragoza in 1990, these matters were included in the priority list.

c&d-learning implementation architecture: Adapting e-learning to developing countries

From the educational point of view, the most widespread method in developing countries is on-site education. Technical and economic resources cannot support conventional distance learning infrastructures and it is even worse for courses in universities. They usually suffer a lack of qualified faculty staff, especially in technical degrees. The literature suggest that e-learning is a suitable solution for this problem, but its methods are developed attending to educational necessities of the First World and cannot be applied directly to other contexts. The proposed methodology is a variant of traditional e-learning adapted to the needs of developing countries. E-learning for Cooperation and Development (c&d-learning) is oriented to be used for educational institutions without adequate technical or human resources. In this paper we describe the c&d-learning implementation architecture based on three main phases: hardware, communication and software; e.g. computer and technical equipping, internet accessing and e-learning platform adaptation. Proper adaptation of educational contents to c&d-learning is discussed and a real case of application in which the authors are involved is described: the Ngozi University at Burundi.

The Innovation Sources in Software Engineering: A Systematic Literature Review

During the last century many researches on the business, marketing and technology fields have developed the innovation research line and large amount of knowledge can be found in the literature. Currently, the importance of systematic and openness approaches to manage the available innovation sources is well established in many knowledge fields. Also in the software engineering sector, where the organizations need to absorb and to exploit as much innovative ideas as possible to get success in the current competitive environment. This Master Thesis presents an study related with the innovation sources in the software engineering eld. The main research goals of this work are the identication and the relevance assessment of the available innovation sources and the understanding of the trends on the innovation sources usage. Firstly, a general review of the literature have been conducted in order to define the research area and to identify research gaps. Secondly, the Systematic Literature Review (SLR) has been proposed as the research method in this work to report reliable conclusions collecting systematically quality evidences about the innovation sources in software engineering field. This contribution provides resources, built-on empirical studies included in the SLR, to support a systematic identication and an adequate exploitation of the innovation sources most suitable in the software engineering field. Several artefacts such as lists, taxonomies and relevance assessments of the innovation sources most suitable for software engineering have been built, and their usage trends in the last decades and their particularities on some countries and knowledge fields, especially on the software engineering, have been researched. This work can facilitate to researchers, managers and practitioners of innovative software organizations the systematization of critical activities on innovation processes like the identication and exploitation of the most suitable opportunities. Innovation researchers can use the results of this work to conduct research studies involving the innovation sources research area. Whereas, organization managers and software practitioners can use the provided outcomes in a systematic way to improve their innovation capability, increasing consequently the value creation in the processes that they run to provide products and services useful to their environment. In summary, this Master Thesis research the innovation sources in the software engineering field, providing useful resources to support an effective innovation sources management. Moreover, several aspects should be deeply study to increase the accuracy of the presented results and to obtain more resources built-on empirical knowledge. It can be supported by the INno- vation SOurces MAnagement (InSoMa) framework, which is introduced in this work in order to encourage openness and systematic approaches to identify and to exploit the innovation sources in the software engineering field.

Metodología de análisis estadístico de roturas en redes de distribución de agua

La presente Tesis plantea una metodología de análisis estadístico de roturas de tubería en redes de distribución de agua, que analiza la relación entre las roturas y la presión de agua y que propone la implantación de una gestión de presiones que reduzca el número de roturas que se producen en dichas redes. Las redes de distribución de agua se deterioran y una de sus graves consecuencias es la aparición de roturas frecuentes en sus tuberías. Las roturas llevan asociados elevados costes sociales, económicos y medioambientales y es por ello por lo que las compañías gestoras del agua tratan de reducirlas en la medida de lo posible. Las redes de distribución de agua se pueden dividir en zonas o sectores que facilitan su control y que pueden ser independientes o aislarse mediante válvulas, como ocurre en las redes de países más desarrollados, o pueden estar intercomunicados hidráulicamente. La implantación de una gestión de presiones suele llevarse a cabo a través de las válvulas reductoras de presión (VPR), que se instalan en las cabeceras de estos sectores y que controlan la presión aguas abajo de la misma, aunque varíe su caudal de entrada. Los métodos más conocidos de la gestión de presiones son la reducción de presiones, que es el control más habitual, el mantenimiento de la presión, la prevención y/o alivio de los aumentos repentinos de presión y el establecimiento de un control por alturas. A partir del año 2005 se empezó a reconocer el efecto de la gestión de presiones sobre la disminución de las roturas. En esta Tesis, se sugiere una gestión de presiones que controle los rangos de los indicadores de la presión de cabecera que más influyan en la probabilidad de roturas de tubería. Así, la presión del agua se caracteriza a través de indicadores obtenidos de la presión registrada en la cabecera de los sectores, debido a que se asume que esta presión es representativa de la presión de operación de todas las tuberías porque las pérdidas de carga son relativamente bajas y las diferencias topográficas se tienen en cuenta en el diseño de los sectores. Y los indicadores de presión, que se pueden definir como el estadístico calculado a partir de las series de la presión de cabecera sobre una ventana de tiempo, pueden proveer la información necesaria para ayudar a la toma de decisiones a los gestores del agua con el fin de reducir las roturas de tubería en las redes de distribución de agua. La primera parte de la metodología que se propone en esta Tesis trata de encontrar los indicadores de presión que influyen más en la probabilidad de roturas de tuberías. Para conocer si un indicador es influyente en la probabilidad de las roturas se comparan las estimaciones de las funciones de distribución acumulada (FDAs) de los indicadores de presiones, considerando dos situaciones: cuando se condicionan a la ocurrencia de una rotura (suceso raro) y cuando se calculan en la situación normal de operación (normal operación). Por lo general, las compañías gestoras cuentan con registros de roturas de los años más recientes y al encontrarse las tuberías enterradas se complica el acceso a la información. Por ello, se propone el uso de funciones de probabilidad que permiten reducir la incertidumbre asociada a los datos registrados. De esta forma, se determinan las funciones de distribución acumuladas (FDAs) de los valores del indicador de la serie de presión (situación normal de operación) y las FDAs de los valores del indicador en el momento de ocurrencia de las roturas (condicionado a las roturas). Si las funciones de distribución provienen de la misma población, no se puede deducir que el indicador claramente influya en la probabilidad de roturas. Sin embargo, si se prueba estadísticamente que las funciones proceden de la misma población, se puede concluir que existe una relación entre el indicador analizado y la ocurrencia de las roturas. Debido a que el número de valores del indicador de la FDA condicionada a las roturas es mucho menor que el número de valores del indicador de la FDA incondicional a las roturas, se generan series aleatorias a partir de los valores de los indicadores con el mismo número de valores que roturas registradas hay. De esta forma, se comparan las FDAs de series aleatorias del indicador con la FDA condicionada a las roturas del mismo indicador y se deduce si el indicador es influyente en la probabilidad de las roturas. Los indicadores de presión pueden depender de unos parámetros. A través de un análisis de sensibilidad y aplicando un test estadístico robusto se determina la situación en la que estos parámetros dan lugar a que el indicador sea más influyente en la probabilidad de las roturas. Al mismo tiempo, los indicadores se pueden calcular en función de dos parámetros de cálculo que se denominan el tiempo de anticipación y el ancho de ventana. El tiempo de anticipación es el tiempo (en horas) entre el final del periodo de computación del indicador de presión y la rotura, y el ancho de ventana es el número de valores de presión que se requieren para calcular el indicador de presión y que es múltiplo de 24 horas debido al comportamiento cíclico diario de la presión. Un análisis de sensibilidad de los parámetros de cálculo explica cuándo los indicadores de presión influyen más en la probabilidad de roturas. En la segunda parte de la metodología se presenta un modelo de diagnóstico bayesiano. Este tipo de modelo forma parte de los modelos estadísticos de prevención de roturas, parten de los datos registrados para establecer patrones de fallo y utilizan el teorema de Bayes para determinar la probabilidad de fallo cuando se condiciona la red a unas determinadas características. Así, a través del teorema de Bayes se comparan la FDA genérica del indicador con la FDA condicionada a las roturas y se determina cuándo la probabilidad de roturas aumenta para ciertos rangos del indicador que se ha inferido como influyente en las roturas. Se determina un ratio de probabilidad (RP) que cuando es superior a la unidad permite distinguir cuándo la probabilidad de roturas incrementa para determinados intervalos del indicador. La primera parte de la metodología se aplica a la red de distribución de la Comunidad de Madrid (España) y a la red de distribución de Ciudad de Panamá (Panamá). Tras el filtrado de datos se deduce que se puede aplicar la metodología en 15 sectores en la Comunidad de Madrid y en dos sectores, llamados corregimientos, en Ciudad de Panamá. Los resultados demuestran que en las dos redes los indicadores más influyentes en la probabilidad de las roturas son el rango de la presión, que supone la diferencia entre la presión máxima y la presión mínima, y la variabilidad de la presión, que considera la propiedad estadística de la desviación típica. Se trata, por tanto, de indicadores que hacen referencia a la dispersión de los datos, a la persistencia de la variación de la presión y que se puede asimilar en resistencia de materiales a la fatiga. La segunda parte de la metodología se ha aplicado a los indicadores influyentes en la probabilidad de las roturas de la Comunidad de Madrid y se ha deducido que la probabilidad de roturas aumenta para valores extremos del indicador del rango de la presión y del indicador de la variabilidad de la presión. Finalmente, se recomienda una gestión de presiones que limite los intervalos de los indicadores influyentes en la probabilidad de roturas que incrementen dicha probabilidad. La metodología propuesta puede aplicarse a otras redes de distribución y puede ayudar a las compañías gestoras a reducir el número de fallos en el sistema a través de la gestión de presiones. This Thesis presents a methodology for the statistical analysis of pipe breaks in water distribution networks. The methodology studies the relationship between pipe breaks and water pressure, and proposes a pressure management procedure to reduce the number of breaks that occur in such networks. One of the manifestations of the deterioration of water supply systems is frequent pipe breaks. System failures are one of the major challenges faced by water utilities, due to their associated social, economic and environmental costs. For all these reasons, water utilities aim at reducing the problem of break occurrence to as great an extent as possible. Water distribution networks can be divided into areas or sectors, which facilitates the control of the network. These areas may be independent or isolated by valves, as it usually happens in developing countries. Alternatively, they can be hydraulically interconnected. The implementation of pressure management strategies is usually carried out through pressure-reducing valves (PRV). These valves are installed at the head of the sectors and, although the inflow may vary significantly, they control the downstream pressure. The most popular methods of pressure management consist of pressure reduction, which is the common form of control, pressure sustaining, prevention and/or alleviation of pressure surges or large variations in pressure, and level/altitude control. From 2005 onwards, the effects of pressure management on burst frequencies have become more widely recognized in the technical literature. This thesis suggests a pressure management that controls the pressure indicator ranges most influential on the probability of pipe breaks. Operating pressure in a sector is characterized by means of a pressure indicator at the head of the DMA, as head losses are relatively small and topographical differences were accounted for at the design stage. The pressure indicator, which may be defined as the calculated statistic from the time series of pressure head over a specific time window, may provide necessary information to help water utilities to make decisions to reduce pipe breaks in water distribution networks. The first part of the methodology presented in this Thesis provides the pressure indicators which have the greatest impact on the probability of pipe breaks to be determined. In order to know whether a pressure indicator influences the probability of pipe breaks, the proposed methodology compares estimates of cumulative distribution functions (CDFs) of a pressure indicator through consideration of two situations: when they are conditioned to the occurrence of a pipe break (a rare event), and when they are not (a normal operation). Water utilities usually have a history of failures limited to recent periods of time, and it is difficult to have access to precise information in an underground network. Therefore, the use of distribution functions to address such imprecision of recorded data is proposed. Cumulative distribution functions (CDFs) derived from the time series of pressure indicators (normal operation) and CDFs of indicator values at times coincident with a reported pipe break (conditioned to breaks) are compared. If all estimated CDFs are drawn from the same population, there is no reason to infer that the studied indicator clearly influences the probability of the rare event. However, when it is statistically proven that the estimated CDFs do not come from the same population, the analysed indicator may have an influence on the occurrence of pipe breaks. Due to the fact that the number of indicator values used to estimate the CDF conditioned to breaks is much lower in comparison with the number of indicator values to estimate the CDF of the unconditional pressure series, and that the obtained results depend on the size of the compared samples, CDFs from random sets of the same size sampled from the unconditional indicator values are estimated. Therefore, the comparison between the estimated CDFs of random sets of the indicator and the estimated CDF conditioned to breaks allows knowledge of if the indicator is influential on the probability of pipe breaks. Pressure indicators depend on various parameters. Sensitivity analysis and a robust statistical test allow determining the indicator for which these parameters result most influential on the probability of pipe breaks. At the same time, indicators can be calculated according to two model parameters, named as the anticipation time and the window width. The anticipation time refers to the time (hours) between the end of the period for the computation of the pressure indicator and the break. The window width is the number of instantaneous pressure values required to calculate the pressure indicator and is multiple of 24 hours, as water pressure has a cyclical behaviour which lasts one day. A sensitivity analysis of the model parameters explains when the pressure indicator is more influential on the probability of pipe breaks. The second part of the methodology presents a Bayesian diagnostic model. This kind of model belongs to the class of statistical predictive models, which are based on historical data, represent break behavior and patterns in water mains, and use the Bayes’ theorem to condition the probability of failure to specific system characteristics. The Bayes’ theorem allows comparing the break-conditioned FDA and the unconditional FDA of the indicators and determining when the probability of pipe breaks increases for certain pressure indicator ranges. A defined probability ratio provides a measure to establish whether the probability of breaks increases for certain ranges of the pressure indicator. The first part of the methodology is applied to the water distribution network of Madrid (Spain) and to the water distribution network of Panama City (Panama). The data filtering method suggests that the methodology can be applied to 15 sectors in Madrid and to two areas in Panama City. The results show that, in both systems, the most influential indicators on the probability of pipe breaks are the pressure range, which is the difference between the maximum pressure and the minimum pressure, and pressure variability, referred to the statistical property of the standard deviation. Therefore, they represent the dispersion of the data, the persistence of the variation in pressure and may be related to the fatigue in material resistance. The second part of the methodology has been applied to the influential indicators on the probability of pipe breaks in the water distribution network of Madrid. The main conclusion is that the probability of pipe breaks increases for the extreme values of the pressure range indicator and of the pressure variability indicator. Finally, a pressure management which limits the ranges of the pressure indicators influential on the probability of pipe breaks that increase such probability is recommended. The methodology presented here is general, may be applied to other water distribution networks, and could help water utilities reduce the number of system failures through pressure management.