Evaluating the reinforcement of inorganic fullerene-like nanoparticles in thermoplastic matrices by depth-sensing indentation

The reinforcing effect of inorganic fullerene-like tungsten disulfide (IF-WS2) nanoparticles in two different polymer matrices, isotactic polypropylene (iPP) and polyphenylene sulfide (PPS), has been investigated by means of dynamic depth-sensing indentation. The hardness and elastic modulus enhancement upon filler addition is analyzed in terms of two main contributions: changes in the polymer matrix nanostructure and intrinsic properties of the filler including matrix-particle load transfer. It is found that the latter mainly determines the overall mechanical improvement, whereas the nanostructural changes induced in the polymer matrix only contribute to a minor extent. Important differences are suggested between the mechanisms of deformation in the two nanocomposites, resulting in a moderate mechanical enhancement in case of iPP (20% for a filler loading of 1%), and a remarkable hardness increase in case of PPS (60% for the same filler content). The nature of the polymer amorphous phase, whether in the glassy or rubbery state, seems to play here an important role. Finally, nanoindentation and dynamic mechanical analysis measurements are compared and discussed in terms of the different directionality of the stresses applied.

Investigación de mezclas de caucho, con bajo contenido en cloro, para bandas transportadoras con características ignífugas

El objeto de la tesis doctoral se centra en la obtención de una banda transportadora de minería exenta de halógenos o al menos con el menor contenido posible, es por ello que se ha realizado un estudio de diferentes matrices poliméricas sin halógenos y se han evaluado diferentes sistemas ignifugantes. Se ha partido de mezclas con base polimérica de caucho natural y de estireno butadieno ya que son cauchos sin halógenos y con los que se pueden obtener mezclas de buenas propiedades mecánicas. Los resultados obtenidos durante el desarrollo de la tesis han sido muy satisfactorios, ya que se fabricaron bandas a gran escala para poder realizar los ensayos descritos en la normativa UNE EN 14973. La clasificación adquirida, categoría B1, alcanza dos de los objetivos marcados al inicio de los trabajos de investigación, y por tanto puede dar lugar a: - La fabricación a nivel industrial - La comercialización de una banda retardante de llama para minería y obra subterránea, formulada con un nuevo aditivo que reduce notablemente el contenido en cloro. - Disminución de la contaminación derivada de los humos tóxicos producidos cuando una banda transportadora arde accidentalmente. Los aditivos retardantes de llama sin halógenos, son muy efectivos en dosis elevadas, para la obtención de mezclas con propiedades ignífugas, pero las propiedades mecánicas de las mezclas se debilitan. Se ha buscado un compromiso entre las propiedades ignífugas y mecánicas, por lo que resulta adecuado obtener aditivos que posean un tamaño de partícula tal que actúen como cargas semi-reforzantes para poder utilizarlos en mayor proporción y así poder conseguir las propiedades ignífugas deseadas sin alterar de forma significativa las demás propiedades de la mezcla. ABSTRACT The purpose of this thesis is to obtain a mining conveyor belt with minimal halogen content, with the final objective of being halogen-free. Several polymer matrices without halogen and as well as fireproof systems have been analyzed to achieve this goal. The polymer mixtures studied are based on natural rubber and styrene butadiene, due to the fact that are rubbers without halogens and which their mixtures have good mechanical properties. The outcome of the thesis research is satisfactory, since the results are manufactured conveyor belts that comply with the tests described in the UNE EN 14973. The obtained B1 classification achieves two objectives set at the beginning of the research, and therefore can lead to: - Manufacturing at industrial level - Marketing of a flame retardant conveyor belt for mining and underground works formulated with a new additive that significantly reduces the chlorine content - Reduce pollution produced of the toxic fumes generated when a conveyor accidentally burns Additive flame retardant halogen-free are very effective in high doses to obtain blends with flame retardant properties, but the mechanical properties of the blends are below standards. A compromise between the fire retardant and mechanical properties has been successfully obtained, making possible to obtain additives that show a particle size that act as semi-reinforcing load in order to use a greater extent and thus be able to achieve the pursued fire retardant properties without altering significant other properties of mixture.

Opportunities and challenges in the use of inorganic fullerene-like nanoparticles to produce advanced polymer nanocomposites

Polymer/inorganic nanoparticle nanocomposites have garnered considerable academic and industrial interest over recent decades in the development of advanced materials for a wide range of applications. In this respect, the dispersion of so-called inorganic fullerene-like (IF) nanoparticles, e.g., tungsten disulfide (IF-WS2) or molybdenum disulfide (IF-MoS2), into polymeric matrices is emerging as a new strategy. The surprising properties of these layered metal dichalcogenides such as high impact resistance and superior tribological behavior, attributed to their nanoscale size and hollow quasi-spherical shape, open up a wide variety of opportunities for applications of these inorganic compounds. The present work presents a detailed overview on research in the area of IF-based polymer nanocomposites, with special emphasis on the use of IF-WS2 nanoparticles as environmentally friendly reinforcing fillers. The incorporation of IF particles has been shown to be efficient for improving thermal, mechanical and tribological properties of various thermoplastic polymers, such as polypropylene, nylon-6, poly(phenylene sulfide), poly(ether ether ketone), where nanocomposites were fabricated by simple melt-processing routes without the need for modifiers or surfactants. This new family of nanocomposites exhibits similar or enhanced performance when compared with nanocomposites that incorporate carbon nanotubes, carbon nanofibers or nanoclays, but are substantially more cost-effective, efficient and environmentally satisfactory. Most recently, innovative approaches have been described that exploit synergistic effects to produce new materials with enhanced properties, including the combined use of micro- and nanoparticles such as IF-WS2/nucleating agent or IF-WS2/carbon fiber, as well as dual nanoparticle systems such as SWCNT/IF-WS2 where each nanoparticle has different characteristics. The structure–property relationships of these nanocomposites are discussed and potential applications proposed ranging from medicine to the aerospace, automotive and electronics industries.