Quality assurance for precast plants and treatment of imperfections for architectural facades

Quality is the threshold or minimum level required to satisfy the consumer´s demands. In construction the quality is objective, and established by standards. It is very difficult to establish the costs of “no quality” in construction. Each precast unit shall be traceable to a specific set of quality control records.

Equipment and procedures for ON-SITE testing of PV plants and BIPV

Actual system performance of a PV system can differ from its expected behaviour.. This is the main reason why the performance of PV systems should be monitored, analyzed and, if needed, improved on. Some of the current testing procedures relating to the electrical behaviour of PV systems are appropriated for detecting electrical performance losses, but they are not well-suited to reveal hidden defects in the modules of PV plants and BIPV, which can lead to future losses. This paper reports on the tests and procedures used to evaluate the performance of PV systems, and especially on a novel procedure for quick on-site measurements and defect recognition caused by overheating in PV modules located in operating PV installations.

Function of C1A barley peptidases and their inhibitors (cystatins) in barley seed germination : Funcion de las peptidasas C1A de cebada y sus inhibidores (cistatinas) en la germinacion de la semilla

Plant proteolysis is a metabolic process where specific enzymes called peptidases degrade proteins. In plants, this complex process involves broad metabolic networks and different sub-cellular compartments. Several types of peptidases take part in the proteolytic process, mainly cysteine-, serine-, aspartyl- and metallo- peptidases. Among the cysteine-peptidases, the papain-like or C1A peptidases (family C1, clan CA) are extensively present in land plants and are classified into catepsins L-, B-, H- and Flike. The catalytic mechanism of these C1A peptidases is highly conserved and involves the three amino acids Cys, His and Asn in the catalytic triad, and a Gln residue which seems essential for maintaining an active enzyme conformation. These proteins are synthesized as inactive precursors, which comprise an N-terminal signal peptide, a propeptide, and the mature protein. In barley, we have identified 33 cysteine-peptidases from the papain-like family, classifying them into 8 different groups. Five of them corresponded to cathepsins L-like (5 subgroups), 1 cathepsin B-like group, 1 cathepsin F-like group and 1 cathepsin H-like group. Besides, C1A peptidases are the specific targets of the plant proteinaceous inhibitors known as phytocystatins (PhyCys). The cystatin inhibitory mechanism is produced by a tight and reversible interaction with their target enzymes. In barley, the cystatin gene family is comprised by 13 members. In this work we have tried to elucidate the role of the C1A cysteine-peptidases and their specific inhibitors (cystatins) in the germination process of the barley grain. Therefore, we selected a representative member of each group/subgroup of C1A peptidases (1 cathepsin B-like, 1 cathepsin F-like, 1 cathepsin H-like and 5 cathepsins L-like). The molecular characterization of the cysteine-peptidases was done and the peptidase-inhibitor interaction was analyzed in vitro and in vivo. A study in the structural basis for specificity of pro-peptide/enzyme interaction in barley C1A cysteine-peptidases has been also carried out by inhibitory assays and the modeling of the three-dimensional structures. The barley grain maturation produces the accumulation of storage proteins (prolamins) in the endosperm which are mobilized during germination to supply the required nutrients until the photosynthesis is fully established. In this work, we have demonstrated the participation of the cysteine-peptidases and their inhibitors in the degradation of the different storage protein fractions (hordeins, albumins and globulins) present in the barley grain. Besides, transgenic barley plants overexpressing or silencing cysteine-peptidases or cystatins were obtained by Agrobacterium-mediated transformation of barley immature embryos to analyze their physiological function in vivo. Preliminary assays were carried out with the T1 grains of several transgenic lines. Comparing the knock-out and the overexpressing lines with the WT, alterations in the germination process were detected and were correlated with their grain hordein content. These data will be validated with the homozygous grains that are being produced through the double haploid technique by microspore culture. Resumen La proteólisis es un proceso metabólico por el cual se lleva a cabo la degradación de las proteínas de un organismo a través de enzimas específicas llamadas proteasas. En plantas, este complejo proceso comprende un entramado de rutas metabólicas que implican, además, diferentes compartimentos subcelulares. En la proteólisis participan numerosas proteasas, principalmente cisteín-, serín-, aspartil-, y metalo-proteasas. Dentro de las cisteín-proteasas, las proteasas tipo papaína o C1A (familia C1, clan CA) están extensamente representadas en plantas terrestres, y se clasifican en catepsinas tipo L, B, H y F. El mecanismo catalítico de estas proteasas está altamente conservado y la triada catalítica formada por los aminoácidos Cys, His y Asn, y a un aminoácido Gln, que parece esencial para el mantenimiento de la conformación activa de la proteína. Las proteasas C1A se sintetizan como precursores inactivos y comprenden un péptido señal en el extremo N-terminal, un pro-péptido y la proteína madura. En cebada hemos identificado 33 cisteín-proteasas de tipo papaína y las hemos clasificado filogenéticamente en 8 grupos diferentes. Cinco de ellos pertenecen a las catepsinas tipo L (5 subgrupos), un grupo a las catepsinas tipo-B, otro a las catepsinas tipo-F y un último a las catepsinas tipo-H. Las proteasas C1A son además las dianas específicas de los inhibidores protéicos de plantas denominados fitocistatinas. El mecanismo de inhibición de las cistatinas está basado en una fuerte interacción reversible. En cebada, se conoce la familia génica completa de las cistatinas, que está formada por 13 miembros. En el presente trabajo se ha investigado el papel de las cisteín-proteasas de cebada y sus inhibidores específicos en el proceso de la germinación de la semilla. Para ello, se seleccionó una proteasa representante de cada grupo/subgrupo (1 catepsina tipo- B, 1 tipo-F, 1 tipo-H, y 5 tipo-L, una por cada subgrupo). Se ha llevado a cabo su caracterización molecular y se ha analizado la interacción enzima-inhibidor tanto in vivo como in vitro. También se han realizado estudios sobre las bases estructurales que demuestran la especificidad en la interacción enzima/propéptido en las proteasas C1A de cebada, mediante ensayos de inhibición y la predicción de modelos estructurales de la interacción. Finalmente, y dado que durante la maduración de la semilla se almacenan proteínas de reserva (prolaminas) en el endospermo que son movilizadas durante la germinación para suministrar los nutrientes necesarios hasta que la nueva planta pueda realizar la fotosíntesis, en este trabajo se ha demostrado la participación de las cisteínproteasas y sus inhibidores en la degradación de las diferentes tipos de proteínas de reserva (hordeinas, albúmins y globulinas) presentes en el grano de cebada. Además, se han obtenido plantas transgénicas de cebada que sobre-expresan o silencian cistatinas y cisteín-proteasas con el fin de analizar la función fisiológica in vivo. Se han realizado análisis preliminares en las semillas T1 de varias líneas tránsgenicas de cebada y al comparar las líneas knock-out y las líneas de sobre-expresión con las silvestres, se han detectado alteraciones en la germinación que están además correlacionadas con el contenido de hordeinas de las semillas. Estos datos serán validados en las semillas homocigotas que se están generando mediante la técnica de dobles haploides a partir del cultivo de microesporas.

Arabidopsis heterotrimeric G-protein regulates cell wall defense and resistance to necrotrophic fungi

The Arabidopsis heterotrimeric G-protein controls defense responses to necrotrophic and vascular fungi. The agb1 mutant impaired in the Gβ subunit displays enhanced susceptibility to these pathogens. Gβ/AGB1 forms an obligate dimer with either one of the Arabidopsis Gγ subunits (γ1/AGG1 and γ2/AGG2). Accordingly, we now demonstrate that the agg1 agg2 double mutant is as susceptible as agb1 plants to the necrotrophic fungus Plectosphaerella cucumerina. To elucidate the molecular basis of heterotrimeric G-protein-mediated resistance, we performed a comparative transcriptomic analysis of agb1-1 mutant and wild-type plants upon inoculation with P. cucumerina. This analysis, together with metabolomic studies, demonstrated that G-protein-mediated resistance was independent of defensive pathways required for resistance to necrotrophic fungi, such as the salicylic acid, jasmonic acid, ethylene, abscisic acid, and tryptophan-derived metabolites signaling, as these pathways were not impaired in agb1 and agg1 agg2 mutants. Notably, many mis-regulated genes in agb1 plants were related with cell wall functions, which was also the case in agg1 agg2 mutant. Biochemical analyses and Fourier Transform InfraRed (FTIR) spectroscopy of cell walls from G-protein mutants revealed that the xylose content was lower in agb1 and agg1 agg2 mutants than in wild-type plants, and that mutant walls had similar FTIR spectratypes, which differed from that of wild-type plants. The data presented here suggest a canonical functionality of the Gβ and Gγ1/γ2 subunits in the control of Arabidopsis immune responses and the regulation of cell wall composition.

Interactive Graphic Simulation: An Advanced Methodology to Improve the Teaching-Learning Process in Nuclear Engineering Education and Training

Nowadays, computer simulators are becoming basic tools for education and training in many engineering fields. In the nuclear industry, the role of simulation for training of operators of nuclear power plants is also recognized of the utmost relevance. As an example, the International Atomic Energy Agency sponsors the development of nuclear reactor simulators for education, and arranges the supply of such simulation programs. Aware of this, in 2008 Gas Natural Fenosa, a Spanish gas and electric utility that owns and operate nuclear power plants and promotes university education in the nuclear technology field, provided the Department of Nuclear Engineering of Universidad Politécnica de Madrid with the Interactive Graphic Simulator (IGS) of “José Cabrera” (Zorita) nuclear power plant, an industrial facility whose commercial operation ceased definitively in April 2006. It is a state-of-the-art full-scope real-time simulator that was used for training and qualification of the operators of the plant control room, as well as to understand and analyses the plant dynamics, and to develop, qualify and validate its emergency operating procedures.

HAK transporters from Physcomitrella patens and Yarrowia lipolytica mediate sodium uptake

The widespread presence of Na+ specific uptake systems across plants and fungi is a controversial topic. In this study we identify two HAK genes, one in the moss Physcomitrella patens and the other in the yeast Yarrowia lipolytica, that encode Na+ specific transporters. Because HAK genes are numerous in plants and are duplicated in many fungi, our findings suggest that some HAK genes encode Na+ transporters and that Na+ might play physiological functions in plants and fungi more extensively than is currently thought.

The family of DOF transcription factors in Brachypodium distachyon: phylogenetic comparison with rice and barley DOFs and expression profiling

ABSTRACT: Transcription factors (TFs) are proteins that have played a central role both in evolution and in domestication, and are major regulators of development in living organisms. Plant genome sequences reveal that approximately 7% of all genes encode putative TFs. The DOF (DNA binding with One Finger) TF family has been associated with vital processes exclusive to higher plants and to their close ancestors (algae, mosses and ferns). These are seed maturation and germination, light-mediated regulation, phytohormone and plant responses to biotic and abiotic stresses, etc. In Hordeum vulgare and Oryza sativa, 26 and 30 different Dof genes, respectively, have been annotated. Brachypodium distachyon has been the first Pooideae grass to be sequenced and, due to its genomic, morphological and physiological characteristics, has emerged as the model system for temperate cereals, such as wheat and barley. RESULTS: Through searches in the B. distachyon genome, 27 Dof genes have been identified and a phylogenetic comparison with the Oryza sativa and the Hordeum vulgare DOFs has been performed. To explore the evolutionary relationship among these DOF proteins, a combined phylogenetic tree has been constructed with the Brachypodium DOFs and those from rice and barley. This phylogenetic analysis has classified the DOF proteins into four Major Cluster of Orthologous Groups (MCOGs). Using RT-qPCR analysis the expression profiles of the annotated BdDof genes across four organs (leaves, roots, spikes and seeds) has been investigated. These results have led to a classification of the BdDof genes into two groups, according to their expression levels. The genes highly or preferentially expressed in seeds have been subjected to a more detailed expression analysis (maturation, dry stage and germination). CONCLUSIONS: Comparison of the expression profiles of the Brachypodium Dof genes with the published functions of closely related DOF sequences from the cereal species considered here, deduced from the phylogenetic analysis, indicates that although the expression profile has been conserved in many of the putative orthologs, in some cases duplication followed by subsequent divergence may have occurred (neo-functionalization).

The role of secretion systems and small molecules in soft-rot enterobacteriaceae pathogenicity

Soft-rot Enterobacteriaceae (SRE), which belong to the genera Pectobacterium and Dickeya, consist mainly of broad host-range pathogens that cause wilt, rot, and blackleg diseases on a wide range of plants. They are found in plants, insects, soil, and water in agricultural regions worldwide. SRE encode all six known protein secretion systems present in gram-negative bacteria, and these systems are involved in attacking host plants and competing bacteria. They also produce and detect multiple types of small molecules to coordinate pathogenesis, modify the plant environment, attack competing microbes, and perhaps to attract insect vectors. This review integrates new information about the role protein secretion and detection and production of ions and small molecules play in soft-rot pathogenicity.

News in engineering education in Spain effective from 2010 in presence of external changes and mixed crisis, looking mostly to agro and civil engineers.

The engineering careers models were diverse in Europe, and are adopting now in Spain the Bolonia process for European Universities. Separated from older Universities, that are in part technically active, Civil Engineering (Caminos, Canales y Puertos) started at end of 18th century in Spain adopting the French models of Upper Schools for state civil servants with exam at entry. After 1800 intense wars, to conserve forest regions Ingenieros de Montes appeared as Upper School, and in 1855 also the Ingenieros Agrónomos to push up related techniques and practices. Other Engineers appeared as Upper Schools but more towards private factories. These ES got all adapted Lower Schools of Ingeniero Tecnico. Recently both grew much in number and evolved, linked also to recognized Professions. Spanish society, into European Community, evolved across year 2000, in part highly well, but with severe discordances, that caused severe youth unemployment with 2008-2011 crisis. With Bolonia process high formal changes step in from 2010-11, accepted with intense adaptation. The Lower Schools are changing towards the Upper Schools, and both that have shifted since 2010-11 various 4-years careers (Grado), some included into the precedent Professions, and diverse Masters. Acceptation of them to get students has started relatively well, and will evolve, and acceptation of new grades for employment in Spain, Europe or outside will be essential. Each Grado has now quite rigid curricula and programs, MOODLE was introduced to connect pupils, some specific uses of Personal Computers are taught in each subject. Escuela de Agronomos centre, reorganized with its old name in its precedent buildings at entrance of Campus Moncloa, offers Grados of Agronomic Engineering and Science for various public and private activities for agriculture, Alimentary Engineering for alimentary activities and control, Agro-Environmental Engineering more related to environment activities, and in part Biotechnology also in laboratories in Campus Monte-Gancedo for Biotechnology of Plants and Computational Biotechnology. Curricula include Basics, Engineering, Practices, Visits, English, ?project of end of career?, Stays. Some masters will conduce to specific professional diploma, list includes now Agro-Engineering, Agro-Forestal Biotechnology, Agro and Natural Resources Economy, Complex Physical Systems, Gardening and Landscaping, Rural Genie, Phytogenetic Resources, Plant Genetic Resources, Environmental Technology for Sustainable Agriculture, Technology for Human Development and Cooperation.

Observed degradation in photovoltaic plants affected by hot-spots

A number of findings have shown that the test procedures currently available to determine the reliability and durability of photovoltaic (PV) modules are insufficient to detect certain problems. To improve these procedures, ongoing research into the actual performance of the modules in the field is required. However, scientific literature contains but few references to field studies of defective modules. This article studies two different localized heating phenomena affecting the PV modules of two large-scale PV plants in Spain. The first problem relates to weak solder joints whilst the second is due to microcracks on the module cells. For both cases, the cause is identified, and consideration is given with regard to the effect on performance, the potential deterioration over time, and a way to detect the problems identified. The findings contained in this paper will prove to be of considerable interest to maintenance personnel at large-scale PV plants and also to those responsible for setting module quality standards and specifications, and even the PV module manufacturers themselves.

Discriminating Crop, Weeds and Soil Surface with a Terrestrial LIDAR Sensor

In this study, the evaluation of the accuracy and performance of a light detection and ranging (LIDAR) sensor for vegetation using distance and reflection measurements aiming to detect and discriminate maize plants and weeds from soil surface was done. The study continues a previous work carried out in a maize field in Spain with a LIDAR sensor using exclusively one index, the height profile. The current system uses a combination of the two mentioned indexes. The experiment was carried out in a maize field at growth stage 12–14, at 16 different locations selected to represent the widest possible density of three weeds: Echinochloa crus-galli (L.) P.Beauv., Lamium purpureum L., Galium aparine L.and Veronica persica Poir.. A terrestrial LIDAR sensor was mounted on a tripod pointing to the inter-row area, with its horizontal axis and the field of view pointing vertically downwards to the ground, scanning a vertical plane with the potential presence of vegetation. Immediately after the LIDAR data acquisition (distances and reflection measurements), actual heights of plants were estimated using an appropriate methodology. For that purpose, digital images were taken of each sampled area. Data showed a high correlation between LIDAR measured height and actual plant heights (R 2 = 0.75). Binary logistic regression between weed presence/absence and the sensor readings (LIDAR height and reflection values) was used to validate the accuracy of the sensor. This permitted the discrimination of vegetation from the ground with an accuracy of up to 95%. In addition, a Canonical Discrimination Analysis (CDA) was able to discriminate mostly between soil and vegetation and, to a far lesser extent, between crop and weeds. The studied methodology arises as a good system for weed detection, which in combination with other principles, such as vision-based technologies, could improve the efficiency and accuracy of herbicide spraying.

Balancing management and preservation of mediterranean scattered oak woodlands (Dehesas) in human-dominated landscapes

Los sistemas agroforestales mediterráneos tienen una gran importancia ecológica y socioeconómica, y mantienen altos valores medioambientales y de diversidad biológica a la vez que producen importantes servicios ecosistémicos. Estos sistemas han sido testigos de diversos cambios rápidos y drásticos en su gestión y aprovechamiento durante el último siglo. La mayor parte de la investigación desarrollada en esta tesis doctoral ha sido llevada a cabo en las dehesas españolas. Esta tesis nos muestra: i) la evidencia de la existencia de un cambio global del estrato arbóreo y del manejo del pastoreo en el todo el área de distribución de la dehesa durante los últimos 60 años; ii) la importancia del papel que juega el arbolado disperso y el adecuado manejo del ganado en la mejora de la producción, calidad y diversidad de las comunidades herbáceas, que a su vez, un pasto herbáceo bien desarrollado es importante para la rentabilidad del sistema, evaluando estos efectos bajo distintos escenarios de clima y calidad de estación; y iii) la evidencia de la falta de regeneración en sistemas agroforestales mediterráneos bajo distintos tipos de manejo del pastoreo, y además se evalúa el crecimiento y desarrollo de las pocas plántulas existentes que serán las que aseguren la viabilidad y persistencia y de estos sistemas. El arbolado disperso de estos sistemas ha experimentado una reducción importante en su densidad arbórea y fracción de cabida cubierta durante el periodo entre 1950-1980 donde tuvieron lugar importantes transformaciones en la actividad agropecuaria. La cabaña ganadera de ovino disminuyó drásticamente en los años 70 en comparación a la de bovino que desde entonces ha aumentado progresivamente hasta la actualidad. Por otro lado, el mismo tipo de manejo del ganado doméstico (especialmente bovino) durante bastante tiempo (mínimo 30 años) provocó una reducción significativa de la densidad de las plántulas. Además la probabilidad de ocurrencia y la intensidad de daños por herbivoría fue mayor bajo pastoreo bovino (con daños más intensos y consistentes) que bajo pastoreo ovino o sin pastoreo doméstico (presencia de ciervos). También el patrón de crecimiento de las plantas jóvenes estuvo afectado por el tipo de manejo, generando plántulas achaparradas en el caso del bovino y plántulas esbeltas favoreciendo el crecimiento en altura en el caso del ovino. La presencia de un arbolado disperso generó una mayor diversidad y variación en la producción de las comunidades herbáceas según las condiciones de disponibilidad de agua. Especialmente, el ecotono como microhábitat sostuvo altos valores de diversidad herbácea. La presencia del ganado bajo pastoreo continuo de intensidad moderada a alta, especialmente el bovino, incrementó los rendimientos de producción y diversidad del estrato herbáceo. Los resultados de esta tesis nos muestran la importancia que tiene la existencia de un equilibrio entre la producción y la conservación de los sistemas agroforestales mediterráneos para obtener una producción sostenible de servicios ecosistémicos mientras se asegura la perpetuación del sistema a largo plazo. Es crucial diseñar planes de gestión incorporando objetivos de conservación que integren técnicas silvopastorales apropiadas para poder aplicar en los sistemas agroforestales mediterráneos. ABSTRACT Mediterranean scattered oak woodlands have great ecological and socio-economic importance, supporting high environmental and amenity values, and relatively rich biological diversity while producing important ecosystem services. They have been witnesses of different and fast changes developed in the last century. Most of the research developed in this dissertation has conducted within dehesas. This thesis provides: i) the global change evidence of the tree layer and grazing management experienced in the land-use range of a Mediterranean scattered oak woodland (dehesa) over the last 60 years; ii) the important role of scattered trees and adequate management grazing in the improvement of grassland yield, quality and diversity - which it is important, in turn, for the system profitability - under different climate scenarios and site quality; and iii) the lack of oak regeneration evidence under some given representative management regimes and how is the growth development of these plants to assure the viability and persistence of Mediterranean scattered oak woodlands. Tree layer experienced a significant reduction in dehesas during 1950-1980 period where the highest human impacts took place. Sheep herd decreased drastically during the 1970s and, in contrast, cattle have been increasing gradually since then. On the other hand, same livestock grazing management (especially cattle) during long time (minimum 30 years) within Mediterranean scattered oak woodlands reduced strongly the density of young oak plants and showed high probability of herbivory occurrence and intensity. Young plant growth pattern was greatly modified by livestock. Cattle grazing generated stunted plants and sheep grazing generated slender plants favoring the height growth. Microsites created by large trees modified the herbaceous yield according the water availability of the year and generated high plant diversity within herbaceous communities. Especially, ecotone microsite supported high values of herbaceous diversity. The presence of livestock species increased the herbaceous yield and maintained a more diverse community under continuous grazing at both moderate and high intensities; especially cattle. Thus, around the influence of scattered trees there is a high amount of different interactions among livestock, trees and grasslands maintaining and enhancing the quality of whole dehesa system. The results of this thesis highlight how important is balancing management and preservation of Mediterranean scattered oak woodlands to obtain the optimum ecosystem services while the system conservation is assured for a long-term. It is crucial to design management plans with conservation goals that include appropriate silvopastoral practices in Mediterranean scattered oak woodlands.

Balancing management and preservation of mediterranean scattered oak woodlands (Dehesas) in human-dominated landscapes

Los sistemas agroforestales mediterráneos tienen una gran importancia ecológica y socioeconómica, y mantienen altos valores medioambientales y de diversidad biológica a la vez que producen importantes servicios ecosistémicos. Estos sistemas han sido testigos de diversos cambios rápidos y drásticos en su gestión y aprovechamiento durante el último siglo. La mayor parte de la investigación desarrollada en esta tesis doctoral ha sido llevada a cabo en las dehesas españolas. Esta tesis nos muestra: i) la evidencia de la existencia de un cambio global del estrato arbóreo y del manejo del pastoreo en el todo el área de distribución de la dehesa durante los últimos 60 años; ii) la importancia del papel que juega el arbolado disperso y el adecuado manejo del ganado en la mejora de la producción, calidad y diversidad de las comunidades herbáceas, que a su vez, un pasto herbáceo bien desarrollado es importante para la rentabilidad del sistema, evaluando estos efectos bajo distintos escenarios de clima y calidad de estación; y iii) la evidencia de la falta de regeneración en sistemas agroforestales mediterráneos bajo distintos tipos de manejo del pastoreo, y además se evalúa el crecimiento y desarrollo de las pocas plántulas existentes que serán las que aseguren la viabilidad y persistencia y de estos sistemas. El arbolado disperso de estos sistemas ha experimentado una reducción importante en su densidad arbórea y fracción de cabida cubierta durante el periodo entre 1950-1980 donde tuvieron lugar importantes transformaciones en la actividad agropecuaria. La cabaña ganadera de ovino disminuyó drásticamente en los años 70 en comparación a la de bovino que desde entonces ha aumentado progresivamente hasta la actualidad. Por otro lado, el mismo tipo de manejo del ganado doméstico (especialmente bovino) durante bastante tiempo (mínimo 30 años) provocó una reducción significativa de la densidad de las plántulas. Además la probabilidad de ocurrencia y la intensidad de daños por herbivoría fue mayor bajo pastoreo bovino (con daños más intensos y consistentes) que bajo pastoreo ovino o sin pastoreo doméstico (presencia de ciervos). También el patrón de crecimiento de las plantas jóvenes estuvo afectado por el tipo de manejo, generando plántulas achaparradas en el caso del bovino y plántulas esbeltas favoreciendo el crecimiento en altura en el caso del ovino. La presencia de un arbolado disperso generó una mayor diversidad y variación en la producción de las comunidades herbáceas según las condiciones de disponibilidad de agua. Especialmente, el ecotono como microhábitat sostuvo altos valores de diversidad herbácea. La presencia del ganado bajo pastoreo continuo de intensidad moderada a alta, especialmente el bovino, incrementó los rendimientos de producción y diversidad del estrato herbáceo. Los resultados de esta tesis nos muestran la importancia que tiene la existencia de un equilibrio entre la producción y la conservación de los sistemas agroforestales mediterráneos para obtener una producción sostenible de servicios ecosistémicos mientras se asegura la perpetuación del sistema a largo plazo. Es crucial diseñar planes de gestión incorporando objetivos de conservación que integren técnicas silvopastorales apropiadas para poder aplicar en los sistemas agroforestales mediterráneos. ABSTRACT Mediterranean scattered oak woodlands have great ecological and socio-economic importance, supporting high environmental and amenity values, and relatively rich biological diversity while producing important ecosystem services. They have been witnesses of different and fast changes developed in the last century. Most of the research developed in this dissertation has conducted within dehesas. This thesis provides: i) the global change evidence of the tree layer and grazing management experienced in the land-use range of a Mediterranean scattered oak woodland (dehesa) over the last 60 years; ii) the important role of scattered trees and adequate management grazing in the improvement of grassland yield, quality and diversity - which it is important, in turn, for the system profitability - under different climate scenarios and site quality; and iii) the lack of oak regeneration evidence under some given representative management regimes and how is the growth development of these plants to assure the viability and persistence of Mediterranean scattered oak woodlands. Tree layer experienced a significant reduction in dehesas during 1950-1980 period where the highest human impacts took place. Sheep herd decreased drastically during the 1970s and, in contrast, cattle have been increasing gradually since then. On the other hand, same livestock grazing management (especially cattle) during long time (minimum 30 years) within Mediterranean scattered oak woodlands reduced strongly the density of young oak plants and showed high probability of herbivory occurrence and intensity. Young plant growth pattern was greatly modified by livestock. Cattle grazing generated stunted plants and sheep grazing generated slender plants favoring the height growth. Microsites created by large trees modified the herbaceous yield according the water availability of the year and generated high plant diversity within herbaceous communities. Especially, ecotone microsite supported high values of herbaceous diversity. The presence of livestock species increased the herbaceous yield and maintained a more diverse community under continuous grazing at both moderate and high intensities; especially cattle. Thus, around the influence of scattered trees there is a high amount of different interactions among livestock, trees and grasslands maintaining and enhancing the quality of whole dehesa system. The results of this thesis highlight how important is balancing management and preservation of Mediterranean scattered oak woodlands to obtain the optimum ecosystem services while the system conservation is assured for a long-term. It is crucial to design management plans with conservation goals that include appropriate silvopastoral practices in Mediterranean scattered oak woodlands.

Impact assessment of an integrated approach for thermal power generation plants asset management in the current energy market

El sector energético, en España en particular, y de forma similar en los principales países de Europa, cuenta con una significativa sobrecapacidad de generación, debido al rápido y significativo crecimiento de las energías renovables en los últimos diez años y la reducción de la demanda energética, como consecuencia de la crisis económica. Esta situación ha hecho que las centrales térmicas de generación de electricidad, y en concreto los ciclos combinados de gas, operen con un factor de utilización extremadamente bajo, del orden del 10%. Además de la reducción de ingresos, esto supone para las plantas trabajar continuamente fuera del punto de diseño, provocando una significativa pérdida de rendimiento y mayores costes de explotación. En este escenario, cualquier contribución que ayude a mejorar la eficiencia y la condición de los equipos, es positivamente considerada. La gestión de activos está ganando relevancia como un proceso multidisciplinar e integrado, tal y como refleja la reciente publicación de las normas ISO 55000:2014. Como proceso global e integrado, la gestión de activos requiere el manejo de diversos procesos y grandes volúmenes de información, incluso en tiempo real. Para ello es necesario utilizar tecnologías de la información y aplicaciones de software. Esta tesis desarrolla un concepto integrado de gestión de activos (Integrated Plant Management – IPM) aplicado a centrales de ciclo combinado y una metodología para estimar el beneficio aportado por el mismo. Debido a las incertidumbres asociadas a la estimación del beneficio, se ha optado por un análisis probabilístico coste-beneficio. Así mismo, el análisis cuantitativo se ha completado con una validación cualitativa del beneficio aportado por las tecnologías incorporadas al concepto de gestión integrada de activos, mediante una entrevista realizada a expertos del sector de generación de energía. Los resultados del análisis coste-beneficio son positivos, incluso en el desfavorable escenario con un factor de utilización de sólo el 10% y muy prometedores para factores de utilización por encima del 30%. ABSTRACT The energy sector particularly in Spain, and in a similar way in Europe, has a significant overcapacity due to the big growth of the renewable energies in the last ten years, and it is seriously affected by the demand decrease due to the economic crisis. That situation has forced the thermal plants and in particular, the combined cycles to operate with extremely low annual average capacity factors, very close to 10%. Apart from the incomes reduction, working in out-of-design conditions, means getting a worse performance and higher costs than expected. In this scenario, anything that can be done to improve the efficiency and the equipment condition is positively received. Asset Management, as a multidisciplinary and integrated process, is gaining prominence, reflected in the recent publication of the ISO 55000 series in 2014. Dealing Asset Management as a global, integrated process needs to manage several processes and significant volumes of information, also in real time, that requires information technologies and software applications to support it. This thesis proposes an integrated asset management concept (Integrated Plant Management-IPM) applied to combined cycle power plants and develops a methodology to assess the benefit that it can provide. Due to the difficulties in getting deterministic benefit estimation, a statistical approach has been adopted for the cot-benefit analysis. As well, the quantitative analysis has been completed with a qualitative validation of the technologies included in the IPM and their contribution to key power plant challenges by power generation sector experts. The cost- benefit analysis provides positive results even in the negative scenario of annual average capacity factor close to 10% and is promising for capacity factors over 30%.

Contributions to uncertainty reduction in the estimation of PV plants performance

Esta tesis doctoral presenta un procedimiento integral de control de calidad en centrales fotovoltaicas, que comprende desde la fase inicial de estimación de las expectativas de producción hasta la vigilancia del funcionamiento de la instalación una vez en operación, y que permite reducir la incertidumbre asociada su comportamiento y aumentar su fiabilidad a largo plazo, optimizando su funcionamiento. La coyuntura de la tecnología fotovoltaica ha evolucionado enormemente en los últimos años, haciendo que las centrales fotovoltaicas sean capaces de producir energía a unos precios totalmente competitivos en relación con otras fuentes de energía. Esto hace que aumente la exigencia sobre el funcionamiento y la fiabilidad de estas instalaciones. Para cumplir con dicha exigencia, es necesaria la adecuación de los procedimientos de control de calidad aplicados, así como el desarrollo de nuevos métodos que deriven en un conocimiento más completo del estado de las centrales, y que permitan mantener la vigilancia sobre las mismas a lo largo del tiempo. Además, los ajustados márgenes de explotación actuales requieren que durante la fase de diseño se disponga de métodos de estimación de la producción que comporten la menor incertidumbre posible. La propuesta de control de calidad presentada en este trabajo parte de protocolos anteriores orientados a la fase de puesta en marcha de una instalación fotovoltaica, y las complementa con métodos aplicables a la fase de operación, prestando especial atención a los principales problemas que aparecen en las centrales a lo largo de su vida útil (puntos calientes, impacto de la suciedad, envejecimiento…). Además, incorpora un protocolo de vigilancia y análisis del funcionamiento de las instalaciones a partir de sus datos de monitorización, que incluye desde la comprobación de la validez de los propios datos registrados hasta la detección y el diagnóstico de fallos, y que permite un conocimiento automatizado y detallado de las plantas. Dicho procedimiento está orientado a facilitar las tareas de operación y mantenimiento, de manera que se garantice una alta disponibilidad de funcionamiento de la instalación. De vuelta a la fase inicial de cálculo de las expectativas de producción, se utilizan los datos registrados en las centrales para llevar a cabo una mejora de los métodos de estimación de la radiación, que es la componente que más incertidumbre añade al proceso de modelado. El desarrollo y la aplicación de este procedimiento de control de calidad se han llevado a cabo en 39 grandes centrales fotovoltaicas, que totalizan una potencia de 250 MW, distribuidas por varios países de Europa y América Latina. ABSTRACT This thesis presents a comprehensive quality control procedure to be applied in photovoltaic plants, which covers from the initial phase of energy production estimation to the monitoring of the installation performance, once it is in operation. This protocol allows reducing the uncertainty associated to the photovoltaic plants behaviour and increases their long term reliability, therefore optimizing their performance. The situation of photovoltaic technology has drastically evolved in recent years, making photovoltaic plants capable of producing energy at fully competitive prices, in relation to other energy sources. This fact increases the requirements on the performance and reliability of these facilities. To meet this demand, it is necessary to adapt the quality control procedures and to develop new methods able to provide a more complete knowledge of the state of health of the plants, and able to maintain surveillance on them over time. In addition, the current meagre margins in which these installations operate require procedures capable of estimating energy production with the lower possible uncertainty during the design phase. The quality control procedure presented in this work starts from previous protocols oriented to the commissioning phase of a photovoltaic system, and complete them with procedures for the operation phase, paying particular attention to the major problems that arise in photovoltaic plants during their lifetime (hot spots, dust impact, ageing...). It also incorporates a protocol to control and analyse the installation performance directly from its monitoring data, which comprises from checking the validity of the recorded data itself to the detection and diagnosis of failures, and which allows an automated and detailed knowledge of the PV plant performance that can be oriented to facilitate the operation and maintenance of the installation, so as to ensure a high operation availability of the system. Back to the initial stage of calculating production expectations, the data recorded in the photovoltaic plants is used to improved methods for estimating the incident irradiation, which is the component that adds more uncertainty to the modelling process. The development and implementation of the presented quality control procedure has been carried out in 39 large photovoltaic plants, with a total power of 250 MW, located in different European and Latin-American countries.