Ion Beam Analysis of He-implanted fusion solid breedes

Introduction Lithium-based ceramics (silicates, titanates, ?) possess a series of advantages as alternative over liquid lithium and lithium-lead alloys for fusion breeders. They have a sufficient lithium atomic density (up to 540 kg*m-3), high temperature stability (up to 1300 K), and good chemical compatibility with structural materials. Nevertheless, few research is made on the diffusion behavior of He and H isotopes through polycrystalline structures of porous ceramics which is crucial in order to understand the mobility of gas coolants as well as, the release of tritium. Moreover, in the operating conditions of actual breeder blanket concepts, the extraction rate of the helium produced during lithium transmutation can be affected by the composition and the structure of the near surface region modifying the performance of BB materials

Thermal diffusion profile by NRA of Deuterium implanted in solid breeder blanket materials

This paper studies the relationship between aging, physical changes and the results of non-destructive testing of plywood. 176 pieces of plywood were tested to analyze their actual and estimated density using non-destructive methods (screw withdrawal force and ultrasound wave velocity) during a laboratory aging test. From the results of statistical analysis it can be concluded that there is a strong relationship between the non-destructive measurements carried out, and the decline in the physical properties of the panels due to aging. The authors propose several models to estimate board density. The best results are obtained with ultrasound. A reliable prediction of the degree of deterioration (aging) of board is presented. Breeder blanket materials have to produce tritium from lithium while fulfilling several strict conditions. In particular, when dealing with materials to be applied in fusion reactors, one of the key questions is the study of light ions retention, which can be produced by transmutation reactions and/or introduced by interaction with the plasma. In ceramic breeders the understanding of the hydrogen isotopes behaviour and specially the diffusion of tritium to the surface is crucial. Moreover the evolution of the microstructure during irradiation with energetic ions, neutrons and electrons is complex because of the interaction of a high number of processes.

Creation and Validation of the Spanish Durum Wheat Core Collection.

Spanish wheat (Triticum spp.) landraces have a considerable polymorphism, containing many unique alleles, relative to other collections. The existence of a core collection is a favored approach for breeders to efficiently explore novel variation and enhance the use of germplasm. In this study, the Spanish durum wheat (Triticum turgidum L.) core collection (CC) was created using a population structure–based method, grouping accessions by subspecies and allocating the number of genotypes among populations according to the diversity of simple sequence repeat (SSR) markers. The CC of 94 genotypes was established, which accounted for 17% of the accessions in the entire collection. An alternative core collection (CH), with the same number of genotypes per subspecies and maximizing the coverage of SSR alleles, was assembled with the Core Hunter software. The quality of both core collections was compared with a random core collection and evaluated using geographic, agromorphological, and molecular marker data not previously used in the selection of genotypes. Both core collections had a high genetic representativeness, which validated their sampling strategies. Geographic and agromorphological variation, phenotypic correlations, and gliadin alleles of the original collection were more accurately depicted by the CC. Diversity arrays technology (DArT) markers revealed that the CC included genotypes less similar than the CH. Although more SSR alleles were retained by the CH (94%) than by the CC (91%), the results showed that the CC was better than CH for breeding purposes.

Molecular tools to improve chestnut management: El Bierzo as a case study

The European chestnut (Castanea sativa Mill.) is a multipurpose species that has been widely cultivated around the Mediterranean basin since ancient times. New varieties were brought to the Iberian Peninsula during the Roman Empire, which coexist since then with native populations that survived the last glaciation. The relevance of chestnut cultivation has being steadily growing since the Middle Ages, until the rural decline of the past century put a stop to this trend. Forest fires and diseases were also major factors. Chestnut cultivation is gaining momentum again due to its economic (wood, fruits) and ecologic relevance, and represents currently an important asset in many rural areas of Europe. In this Thesis we apply different molecular tools to help improve current management strategies. For this study we have chosen El Bierzo (Castile and Leon, NW Spain), which has a centenary tradition of chestnut cultivation and management, and also presents several unique features from a genetic perspective (next paragraph). Moreover, its nuts are widely appreciated in Spain and abroad for their organoleptic properties. We have focused our experimental work on two major problems faced by breeders and the industry: the lack of a fine-grained genetic characterization and the need for new strategies to control blight disease. To characterize with sufficient detail the genetic diversity and structure of El Bierzo orchards, we analyzed DNA from 169 trees grafted for nut production covering the entire region. We also analyzed 62 nuts from all traditional varieties. El Bierzo constitutes an outstanding scenario to study chestnut genetics and the influence of human management because: (i) it is located at one extreme of the distribution area; (ii) it is a major glacial refuge for the native species; (iii) it has a long tradition of human management (since Roman times, at least); and (iv) its geographical setting ensures an unusual degree of genetic isolation. Thirteen microsatellite markers provided enough informativeness and discrimination power to genotype at the individual level. Together with an unexpected level of genetic variability, we found evidence of genetic structure, with three major gene pools giving rise to the current population. High levels of genetic differentiation between groups supported this organization. Interestingly, genetic structure does not match with spatial boundaries, suggesting that the exchange of material and cultivation practices have strongly influenced natural gene flow. The microsatellite markers selected for this study were also used to classify a set of 62 samples belonging to all traditional varieties. We identified several cases of synonymies and homonymies, evidencing the need to substitute traditional classification systems with new tools for genetic profiling. Management and conservation strategies should also benefit from these tools. The avenue of high-throughput sequencing technologies, combined with the development of bioinformatics tools, have paved the way to study transcriptomes without the need for a reference genome. We took advantage of RNA sequencing and de novo assembly tools to determine the transcriptional landscape of chestnut in response to blight disease. In addition, we have selected a set of candidate genes with high potential for developing resistant varieties via genetic engineering. Our results evidenced a deep transcriptional reprogramming upon fungal infection. The plant hormones ET and JA appear to orchestrate the defensive response. Interestingly, our results also suggest a role for auxins in modulating such response. Many transcription factors were identified in this work that interact with promoters of genes involved in disease resistance. Among these genes, we have conducted a functional characterization of a two major thaumatin-like proteins (TLP) that belongs to the PR5 family. Two genes encoding chestnut cotyledon TLPs have been previously characterized, termed CsTL1 and CsTL2. We substantiate here their protective role against blight disease for the first time, including in silico, in vitro and in vivo evidence. The synergy between TLPs and other antifungal proteins, particularly endo-p-1,3-glucanases, bolsters their interest for future control strategies based on biotechnological approaches.

Optimizing the creation of base populations for aquaculture breeding programs using phenotypic and genomic data and its consequences on genetic progress

The success of an aquaculture breeding program critically depends on the way in which the base population of breeders is constructed since all the genetic variability for the traits included originally in the breeding goal as well as those to be included in the future is contained in the initial founders. Traditionally, base populations were created from a number of wild strains by sampling equal numbers from each strain. However, for some aquaculture species improved strains are already available and, therefore, mean phenotypic values for economically important traits can be used as a criterion to optimize the sampling when creating base populations. Also, the increasing availability of genome-wide genotype information in aquaculture species could help to refine the estimation of relationships within and between candidate strains and, thus, to optimize the percentage of individuals to be sampled from each strain. This study explores the advantages of using phenotypic and genome-wide information when constructing base populations for aquaculture breeding programs in terms of initial and subsequent trait performance and genetic diversity level. Results show that a compromise solution between diversity and performance can be found when creating base populations. Up to 6% higher levels of phenotypic performance can be achieved at the same level of global diversity in the base population by optimizing the selection of breeders instead of sampling equal numbers from each strain. The higher performance observed in the base population persisted during 10 generations of phenotypic selection applied in the subsequent breeding program.

Aproximación a la arquitectura popular en la Mancha Baja. El caso de Manzanares

La tesis se compone de una primera parte introductoria, en la que se recogen las distintas opiniones y definiciones de la arquitectura “popular”, el estado de la cuestión, comentando los artículos y publicaciones realizados sobre la Mancha. La segunda parte profundiza en aspectos generales previos al análisis edificatorio central de la tesis, con los siguientes capítulos: -Estudio de los condicionantes físicos, históricos, socio-económicos y culturales de la comarca de la Mancha Baja. Acotando el territorio. -Una visión general sobre la arquitectura tradicional de la provincia de Ciudad Real, por comarcas. -Un estudio de las distintas tipologías edificatorias tradicionales, con ejemplos en la comarca manchega. -El análisis de materiales constructivos, elementos y sistemas utilizados en las construcciones tradicionales en la Mancha Baja. La tercera parte, desde la premisa de la representación gráfica, apoyado en un anexo con dibujos de ciento treinta y siete edificios populares de Manzanares y comarca, estudia: El trazado urbano y las casas de Manzanares; desde los levantamientos de plantas, alzados y secciones, emplazamiento en la manzana y fotografías, se realiza una descripción completa, con noventa y seis ejemplos. Además de llegar a las conclusiones derivadas del análisis de estas edificaciones, los objetivos pretendidos con este estudio serían también: Realizar un primer trabajo aproximativo, desde la visión arquitectónica, de la arquitectura tradicional manchega. Recopilar toda la información existente que pueda relacionarse con la arquitectura popular en la comarca, y citar los escritos y publicaciones de referencia para posteriores estudios. Se estudia la geomorfología, el clima, el territorio, la economía, la sociología, etc…, para obtener una información clave, además de los materiales, técnicas constructivas y morfología de las edificaciones. Se destaca el apartado de los edificios preindustriales tradicionales, como molinos de viento, de agua, palomares, pósitos y bodegas con el análisis de varios ejemplos, por su importante presencia en las poblaciones. Por último se desarrolla un amplio bloque sobre bibliografía de arquitectura popular, la consultada y la general. La arquitectura popular de la mancha baja es tapial cubierto de teja árabe, cerrada al exterior, pero abierta a grandes patios, de planta baja y cámaras altas, con elementos auxiliares de protección y acceso, que revisten la aparente simplicidad volumétrica de estos complejos, viviendas-almacén. Con un complejo programa tanto agrícola como doméstico. De gran protección frente al clima, con escasa decoración, esquemas espaciales primitivos y con mayor envergadura estructural en las dependencias agropecuarias. Una arquitectura que mezcla el uso doméstico y el productivo, pero que al evolucionar aumenta su diferenciación. Edificios que mantienen las mismas cualidades estéticas, repitiendo formas y volúmenes, pero de peculiares configuraciones espaciales, se repiten los materiales y técnicas constructivas, así como elementos arquitectónicos con pocas variaciones, pero no existen dos conjuntos similares. No podemos utilizar un ejemplo como modelo de casa manchega. Evoluciona de la casa bloque, básica y primitiva, con ejemplos escasos en las poblaciones más deprimidas, a la casa compleja, donde se separan con claridad las dependencias agropecuarias de las vivideras. Evoluciona de una casa rural, con los mismos esquemas, ya se ubique en el campo o en núcleos de población, a la casa urbana, entre medianerías, en la que se puede encontrar una transformación paralela, desarrollándose programas domésticos, más especializados, mezclados con arquitecturas cultas, con programas que reflejan las nuevas necesidades de la sociedad urbana del siglo XX. ABSTRACT The thesis is composed of a first part that is collected as introducing different views and definitions of popular architecture, the state of affairs, commenting on articles and publications carried out at the Mancha. The second part explores general issues before the main urban analysis of the thesis, with the following chapters: -A study of the geographic, historical, socio-economic and cultural conditions of the region of the Mancha Baja. Delimiting the territory -A tour with an overview of the province of Ciudad Real by regions. -A study of the different traditional building types, with examples in the region from the Mancha. -The Analysis of building materials, components and systems used in traditional buildings in the Mancha Lower The third part studies from the premise of the drawing: The urban planning of the towns to study and houses of Manzanares, from the execution of plans, elevations and sections, sites in the blocks, old photographs, a full description is made, covering a wide range of examples, highlighting the “evolution during the twentieth century, in its last quarter, buildings of popular character “, which is the ultimate aim of the thesis. In addition to reaching the conclusions drawn from the analysis cards of these buildings, the objectives pursued with this study would be also: This paper is the realization of a first rough work from the architectural vision of traditional architecture from the Mancha. To Search a work method for approaching the popular architecture, other than those made so far by other studies of historians, engineers and sociologists, with the graphical representation and the buildings would be studied like living organisms that evolve over time. To collect all the current information that It can be able to connect itself with the popular architecture in the region, and cite the writings and publications of reference for future studies. Geomorphology, climate, topography of the place is studied to obtain a key information about materials, construction techniques and morphology of the buildings. A section is opened to study the case of traditional industrial buildings like windmills, flour mill, pigeon lofts, public granary, threshing floor and cellars with the analysis of several examples; its importance is highlighted in the urban plan of the town. Finally a large block of popular literature on architecture is developed, consulted for work is distinct from the general existing on the subject. The popular architecture from the Mancha is built of rammed earth and roofs inclined of Arabic tiles, the buildings are closed to the outside, but they are open around large courtyards, and ground floor and camera high, with additional elements of protection, they are opened to patios. The manor has a complex program on agricultural and domestic activity. Large climate protection, poor decoration, quite primitive in shaping living spaces, and more structural scale in storage and processing units of agriculture-related products, mainly wine, cereal and to a lesser extent oil. These architecture combines the domestic and productive use, but which will evolve and they are distinguishing, both enclosed spaces such as courtyards. The buildings keep the same aesthetic qualities because they repeat shapes and volumes, but they maintain their spatial configuration individually; the materials, building techniques and architectural elements are repeated with slight variations, but there aren´t two identical houses. This architecture evolved from the block, basic and primitive house, with few examples in the most deprived towns, to the complex house, where agricultural units are clearly separated of domestic rooms. It developed from a country house (with the same patterns) whether it is located in the countryside or in the towns, to an urban house, in which we can find a parallel transformation, developing domestic programs, more specialized, mixed with cultivated architectures, with programs that reflect the changing needs of urban society of the twentieth century.

Influence of body weight of the pullets at hatch on egg production at the onset of the subsequent laying period

We studied the influence of pre-incubation weight of eggs (EW) laid by 24 wk-old brown laying breeders on egg production from 18 (start of egg production) to 22 wk of age (average egg production across EW treatments of 87.8%). The experiment consisted in 7 treatments based on the initial EW (47 to 53 g with 1 g difference between groups) Average BW of the extreme groups varied at hatching from 32.5 to 35.4 g, respectively. Feed intake, egg production, and egg weight were recorded weekly by replicate as well as for the entire experiment (18 to 22 wk of age). Hens were weighed by replicate at the beginning and at the end of the experiment. From these data, ADFI, egg production, egg weight, egg mass, feed conversion ratio per kilogram of eggs and per dozen of eggs, and BW gain were calculated by week and for the entire experiment. Also, the number of dirty, broken, and shell-less eggs was recorded daily by replicate in all eggs produced. Data were analyzed as a completely randomized design with 7 treatments differing in the initial pre-hatching EW. Effects of EW on the variables studied were partitioned into linear and quadratic components. EW did not affect the age at which pullets reached 50% egg production, cumulative egg production, or BW gain of the hens from 18 to 22 wk of age. Egg weight and the proportion of dirty, broken, and shell-less eggs were not affected by the BW of the pullets at hatching. In summary, small eggs (>47 g) laid by young, healthy laying breeders, can be used successfully to produce high quality pullets