Analysis of The Key Parameters in Pedestrian Safety Assessment for the European Vehicle Fleet Using Multibody and Finite Element Mathematical Models

Esta tesis investiga cuales son los parámetros más críticos que condicionan los resultados que obtienen en los ensayos de protección de peatones la flota Europea de vehículos, según la reglamentación europea de protección de peatones de 2003 (Directiva CE 2003/102) y el posterior Reglamento de 2009 (Reglamento CE 2009/78). En primer lugar se ha analizado el contexto de la protección de peatones en Europa, viendo la historia de las diferentes propuestas de procedimientos de ensayo así como los cambios (y las razones de los mismos) que han sufrido a lo largo del proceso de definición de la normativa Europea. Con la información disponible de más de 400 de estos ensayos se han desarrollado corredores de rigidez para los frontales de los diferentes segmentos de la flota de vehículos europea, siendo este uno de los resultados más relevantes de esta tesis. Posteriormente, esta tesis ha realizado un estudio accidentológico en detalle de los escenarios de atropello de peatones, identificando sus características más relevantes, los grupos de población con mayor riesgo y los tipos de lesiones más importantes que aparecen (en frecuencia y severidad), que han sentado las bases para analizar con modelos matemáticos hasta qué punto los métodos de ensayo propuestos realmente tienen estos factores en cuenta. Estos análisis no habrían sido posibles sin el desarrollo de las nuevas herramientas que se presentan en esta tesis, que permiten construir instantáneamente el modelo matemático de cualquier vehículo y cualquier peatón adulto para analizar su iteración. Así, esta tesis ha desarrollado una metodología rápida para desarrollar modelos matemáticos de vehículos a demanda, de cualquier marca y modelo y con las características geométricas y de rigidez deseados que permitan representarlo matemáticamente y del mismo modo, ha investigado cómo evoluciona el comportamiento del cuerpo humano durante el envejecimiento y ha implementado una funcionalidad de escalado en edad al modelo de peatón en multicuerpo de MADYMO (ya escalable en tamaño) para permitir modelar ad hoc cualquier peatón adulto (en género y edad). Finalmente, esta tesis también ha realizado, utilizando modelos de elementos finitos del cuerpo humano, diferentes estudios sobre la biomecánica de las lesiones más frecuentes de este tipo de accidentes, (en piernas y cabeza) con el objetivo de mejorar los procedimientos de ensayo para que predigan mejor el tipo de lesiones que se quieren evitar. Con el marco temporal y las condiciones de contorno de esta tesis se han centrado los esfuerzos en reforzar algunos aspectos críticos pero puntuales sobre cómo mejorar el ensayo de cabeza y, sobretodo, en proponer soluciones viables y con un valor añadido real al ensayo de pierna contra parachoques, sin cambiar la esencia del mismo pero proponiendo un nuevo impactador mejorado que incorpore una masa extra que representa a la parte superior del cuerpo y sea válido para toda la flota europea de vehículos independiente de la geometría de su frontal.

Implicaciones de la accesibilidad configuracional en la movilidad peatonal. El caso de Madrid = The implications of configurational accessibility in pedestrian mobility. The case of Madrid

- Resumen La hipótesis que anima esta tesis doctoral es que algunas de las características del entorno urbano, en particular las que describen la accesibilidad de su red de espacio público, podrían estar relacionadas con la proporción de viajes a pie o reparto modal, que tiene cada zona o barrio de Madrid. Uno de los puntos de partida de dicha hipótesis que el entorno urbano tiene una mayor influencia sobre los viaje a pie que en sobre otros modos de transporte, por ejemplo que en los viajes de bicicleta o en transporte público; y es que parece razonable suponer que estos últimos van a estar más condicionadas por ejemplo por la disponibilidad de vías ciclistas, en el primer caso, o por la existencia de un servicio fiable y de calidad, en el segundo. Otra de las motivaciones del trabajo es que la investigación en este campo de la accesibilidad del espacio público, en concreto la denominada “Space Syntax”, ha probado en repetidas ocasiones la influencia de la red de espacio público en cómo se distribuye la intensidad del tráfico peatonal por la trama urbana, pero no se han encontrado referencias de la influencia de dicho elemento sobre el reparto modal. De acuerdo con la hipótesis y con otros trabajos anteriores se propone una metodología basada en el análisis empírico y cuantitativo. Su objetivo es comprobar si la red de espacio público, independientemente de otras variables como los usos del suelo, incluso de las variables de ajenas entorno no construido, como las socioeconómicas, está o no relacionada estadísticamente con la proporción de peatones viajes en las zonas urbanas. Las técnicas estadísticas se utilizan para comprobar sistemáticamente la asociación de las variables del entorno urbano, denominadas variables independientes, con el porcentaje de viajes a pie, la variable dependiente. En términos generales, la metodología es similar a la usada en otros trabajos en este campo como los de CERVERÓ y KOCKLEMAN (1997), CERVERÓ y DUNCAN (2003), o para los que se utilizan principalmente en la revisión general de TRB (2005) o, más recientemente, en ZEGRAS (2006) o CHATMAN (2009). Otras opciones metodológicas, como los métodos de preferencias declaradas (ver LOUVIERE, HENSHER y SWAIT, 2000) o el análisis basado en agentes (PENN & TURNER, 2004) fueron descartados, debido a una serie de razones, demasiado extensas para ser descritas aquí. El caso de estudio utilizado es la zona metropolitana de Madrid, abarcándola hasta la M-50, es decir en su mayor parte, con un tamaño aproximado de 31x34 Km y una población de 4.132.820 habitantes (aproximadamente el 80% de la población de la región). Las principales fuentes de datos son la Encuesta Domiciliaria de Movilidad de 2004 (EDM04), del Consorcio Regional de Transportes de Madrid que es la última disponible (muestra: > 35.000 familias,> 95.000 personas), y un modelo espacial del área metropolitana, integrando el modelo para calcular los índices de Space Syntax y un Sistema de Información Geográfica (SIG). La unidad de análisis, en este caso las unidades espaciales, son las zonas de transporte (con una población media de 7.063 personas) y los barrios (con una población media de 26.466 personas). Las variables del entorno urbano son claramente el centro del estudio. Un total de 20 índices (de 21) se seleccionan de entre los más relevantes encontrados en la revisión de la producción científica en este campo siendo que, al mismo tiempo, fueran accesibles. Nueve de ellos se utilizan para describir las características de los usos del suelo, mientras que otros once se usan para describir la red de espacios públicos. Estos últimos incluyen las variables de accesibilidad configuracional, que son, como se desprende de su título, el centro del estudio propuesto. La accesibilidad configuracional es un tipo especial de accesibilidad que se basa en la configuración de la trama urbana, según esta fue definida por HILLIER (1996), el autor de referencia dentro de esta línea de investigación de Space Syntax. Además se incluyen otras variables de la red de espacio público más habituales en los estudios de movilidad, y que aquí se denominan características geométricas de los elementos de la red, tales como su longitud, tipo de intersección, conectividad, etc. Por último se incluye además una variable socioeconómica, es decir ajena al entorno urbano, para evaluar la influencia de los factores externos, pues son varios los que pueden tener un impacto en la decisión de caminar (edad, género, nivel de estudios, ingresos, tasa de motorización, etc.). La asociación entre las variables se han establecido usando análisis de correlación (bivariante) y modelos de análisis multivariante. Las primeras se calculan entre por pares entre cada una de las 21 variables independientes y la dependiente, el porcentaje de viajes a pie. En cuanto a los segundos, se han realizado tres tipos de estudios: modelo multivariante general lineal, modelo multivariante general curvilíneo y análisis discriminante. Todos ellos son capaces de generar modelos de asociación entre diversas variables, pudiéndose de esta manera evaluar con bastante precisión en qué medida cada modelo reproduce el comportamiento de la variable dependiente, y además, el peso o influencia de cada variable en el modelo respecto a las otras. Los resultados fundamentales del estudio se expresan en dos modelos finales alternativos, que demuestran tener una significativa asociación con el porcentaje de viajes a pie (R2 = 0,6789, p <0,0001), al explicar las dos terceras partes de su variabilidad. En ellos, y en general en todo el estudio realizado, se da una influencia constante de tres índices en particular, que quedan como los principales. Dos de ellos, de acuerdo con muchos de los estudios previos, corresponden a la densidad y la mezcla de usos del suelo. Pero lo más novedoso de los resultados obtenidos es que el tercero es una medida de la accesibilidad de la red de espacio público, algo de lo que no había referencias hasta ahora. Pero, ¿cuál es la definición precisa y el peso relativo de cada uno en el modelo, es decir, en la variable independiente? El de mayor peso en la mayor parte de los análisis realizados es el índice de densidad total (n º residentes + n º puestos de trabajo + n º alumnos / Ha). Es decir, una densidad no sólo de población, sino que incluye algunas de las actividades más importantes que pueden darse una zona para generar movilidad a pie. El segundo que mayor peso adquiere, llegando a ser el primero en alguno de los análisis estadísticos efecturados, es el índice de accesibuilidad configuracional denominado integración de radio 5. Se trata de una medida de la accesibilidad de la zona, de su centralidad, a la escala de, más un menor, un distrito o comarca. En cuanto al tercero, obtiene una importancia bastante menor que los anteriores, y es que representa la mezcla de usos. En concreto es una medida del equilibrio entre los comercios especializados de venta al por menor y el número de residentes (n º de tiendas especializadas en alimentación, bebidas y tabaco / n º de habitantes). Por lo tanto, estos resultados confirman buena parte de los de estudios anteriores, especialmente los relativas a los usos del suelo, pero al mismo tiempo, apuntan a que la red de espacio público podría tener una influir mayor de la comprobada hasta ahora en la proporción de peatones sobre el resto de modos de transportes. Las razones de por qué esto puede ser así, se discuten ampliamente en las conclusiones. Finalmente se puede precisar que dicha conclusión principal se refiere a viajes de una sola etapa (no multimodales) que se dan en los barrios y zonas del área metropolitana de Madrid. Por supuesto, esta conclusión tiene en la actualidad, una validez limitada, ya que es el resultado de un solo caso — Abstract The research hypothesis for this Ph.D. Thesis is that some characteristics of the built environment, particularly those describing the accessibility of the public space network, could be associated with the proportion of pedestrians in all trips (modal split), found in the different parts of a city. The underlying idea is that walking trips are more sensitive to built environment than those by other transport modes, such as for example those by bicycle or by public transport, which could be more conditioned by, e.g. infrastructure availability or service frequency and quality. On the other hand, it has to be noted that the previously research on this field, in particular within Space Syntax’s where this study can be referred, have tested similar hypothesis using pedestrian volumes as the dependent variable, but never against modal split. According to such hypothesis, research methodology is based primarily on empirical quantitative analysis, and it is meant to be able to assess whether public space network, no matter other built environment and non-built environment variables, could have a relationship with the proportion of pedestrian trips in urban areas. Statistical techniques are used to check the association of independent variables with the percentage of walking in all trips, the dependent one. Broadly speaking this methodology is similar to that of previous studies in the field such as CERVERO&KOCKLEMAN (1997), CERVERO & DUNCAN (2003), or to those used mainly in the general review of T.R.B. (2005) or, more recently in ZEGRAS (2006) or CHATMAN (2009). Other methodological options such as stated choice methods (see LOUVIERE, HENSHER & SWAIT, 2000) or agent based analysis (PENN & TURNER, 2004), were discarded, due to a number of reasons, too long to be described here. The case study is not the entire Madrid’s metropolitan area, but almost (4.132.820 inhabitants, about 80% of region´s population). Main data sources are the Regional Mobility Home Based Survey 2004 (EDM04), which is the last available (sample: >35.000 families, > 95.000 individuals), and a spatial model of the metropolitan area, developed using Space Syntax and G.I.S. techniques. The analysis unit, in this case spatial units, are both transport zones (mean population = 7.063) and neighborhoods (mean population = 26.466). The variables of the built environment are clearly the core of the study. A total of 20 (out of 21) are selected from among those found in the literature while, at the same time, being accessible. Nine out of them are used to describe land use characteristics while another eleven describe the network of public spaces. Latter ones include configurational accessibility or Space Syntax variables. This is a particular sort of accessibility related with the concept of configuration, by HILLIER (1996), one of the main authors of Space Syntax, But it also include more customary variables used in mobility research to describe the urban design or spatial structure (here public space network), which here are called geometric characteristics of the such as its length, type of intersection, conectivity, density, etc. Finally a single socioeconomic variable was included in order to assess the influence non built environment factors that also may have an impact on walking (age, income, motorization rate, etc.). The association among variables is worked out using bi-variate correlation analysis and multivariate-analysis. Correlations are calculated among the 21 independent variables and the dependent one, the percentage of walking trips. Then, three types of multi-variate studies are run: general linear, curvilinear and discriminant multi-variate analysis. The latter are fully capable of generating complex association models among several variables, assessing quite precisely to what extent each model reproduces the behavior of the dependent variable, and also the weight or influence of each variable in the model. This study’s results show a consistent influence of three particular indexes in the two final alternative models of the multi-variate study (best, R2=0,6789, p<0,0000). Not surprisingly, two of them correspond to density and mix of land uses. But perhaps more interesting is that the third one is a measure of the accessibility of the public space network, a variable less important in the literature up to now. Additional precisions about them and their relative weight could also be of some interest. The density index is not only about population but includes most important activities in an area (nº residents + nº jobs+ nº students/Ha). The configurational index (radius 5 integration) is a measure of the accessibility of the area, i.e. centrality, at the scale of, more a less, a district. Regarding the mix of land uses index, this one is a measure of the balance between retail, in fact local basic retail, and the number of residents (nº of convenience shops / nº of residents). Referring to their weights, configurational index (radius 5 integration) gets the higher standardized coefficient of the final equation. However, in the final equations, there are a higher number of indexes coming from the density or land use mix categories than from public space network enter. Therefore, these findings seem to support part of the field’s knowledge, especially those concerning land uses, but at the same time they seem to bring in the idea that the configuration of the urban grid could have an influence in the proportion of walkers (as a part of total trips on any transport mode) that do single journey trips in the neighborhoods of Madrid, Spain. Of course this conclusion has, at present, a limited validity since it’s the result of a single case. The reasons of why this can be so, are discussed in the last part of the thesis.

Improved heuristic drift elimination with magnetically-aided dominant directions (MiHDE) for pedestrian navigation in complex buildings

The main problem of pedestrian dead-reckoning (PDR) using only a body-attached inertial measurement unit is the accumulation of heading errors. The heading provided by magnetometers in indoor buildings is in general not reliable and therefore it is commonly not used. Recently, a new method was proposed called heuristic drift elimination (HDE) that minimises the heading error when navigating in buildings. It assumes that the majority of buildings have their corridors parallel to each other, or they intersect at right angles, and consequently most of the time the person walks along a straight path with a heading constrained to one of the four possible directions. In this article we study the performance of HDE-based methods in complex buildings, i.e. with pathways also oriented at 45°, long curved corridors, and wide areas where non-oriented motion is possible. We explain how the performance of the original HDE method can be deteriorated in complex buildings, and also, how severe errors can appear in the case of false matches with the building's dominant directions. Although magnetic compassing indoors has a chaotic behaviour, in this article we analyse large data-sets in order to study the potential use that magnetic compassing has to estimate the absolute yaw angle of a walking person. Apart from these analysis, this article also proposes an improved HDE method called Magnetically-aided Improved Heuristic Drift Elimination (MiHDE), that is implemented over a PDR framework that uses foot-mounted inertial navigation with an extended Kalman filter (EKF). The EKF is fed with the MiHDE-estimated orientation error, gyro bias corrections, as well as the confidence over that corrections. We experimentally evaluated the performance of the proposed MiHDE-based PDR method, comparing it with the original HDE implementation. Results show that both methods perform very well in ideal orthogonal narrow-corridor buildings, and MiHDE outperforms HDE for non-ideal trajectories (e.g. curved paths) and also makes it robust against potential false dominant direction matchings.

Accurate pedestrian indoor navigation by tightly coupling foot-mounted IMU and RFID measurements

We present a new method to accurately locate persons indoors by fusing inertial navigation system (INS) techniques with active RFID technology. A foot-mounted inertial measuring units (IMUs)-based position estimation method, is aided by the received signal strengths (RSSs) obtained from several active RFID tags placed at known locations in a building. In contrast to other authors that integrate IMUs and RSS with a loose Kalman filter (KF)-based coupling (by using the residuals of inertial- and RSS-calculated positions), we present a tight KF-based INS/RFID integration, using the residuals between the INS-predicted reader-to-tag ranges and the ranges derived from a generic RSS path-loss model. Our approach also includes other drift reduction methods such as zero velocity updates (ZUPTs) at foot stance detections, zero angular-rate updates (ZARUs) when the user is motionless, and heading corrections using magnetometers. A complementary extended Kalman filter (EKF), throughout its 15-element error state vector, compensates the position, velocity and attitude errors of the INS solution, as well as IMU biases. This methodology is valid for any kind of motion (forward, lateral or backward walk, at different speeds), and does not require an offline calibration for the user gait. The integrated INS+RFID methodology eliminates the typical drift of IMU-alone solutions (approximately 1% of the total traveled distance), resulting in typical positioning errors along the walking path (no matter its length) of approximately 1.5 m.

Measurements and Prediction of Pedestrian Walking Loads on an Aluminium Catwalk

During the last two decades the topic of human induced vibration has attracted a lot of attention among civil engineering practitioners and academics alike. Usually this type of problem may be encountered in pedestrian footbridges or floors of paperless offices. Slender designs are becoming increasingly popular, and as a consequence, the importance of paying attention to vibration serviceability also increases. This paper resumes the results obtained from measurements taken at different points of an aluminium catwalk which is 6 m in length by 0.6 m in width. Measurements were carried out when subjecting the structure to different actions:1)Static test: a steel cylinder of 35 kg was placed in the middle of the catwalk; 2)Dynamic test: this test consists of exciting the structure with singles impulses; 3)Dynamic test: people walking on the catwalk. Identification of the mechanical properties of the structure is an achievement of the paper. Indirect methods were used to estimate properties including the support stiffness, the beam bending stiffness, the mass of the structure (using Rayleigh method and iterative matrix method), the natural frequency (using the time domain and frequency domain analysis) and the damping ratio (by calculating the logarithmic decrement). Experimental results and numerical predictions for the response of an aluminium catwalk subjected to walking loads have been compared. The damping of this light weight structure depends on the amplitude of vibration which complicates the tuning of a structural model. In the light of the results obtained it seems that the used walking load model is not appropriate as the predicted transient vibration values (TTVs) are much higher than the measured ones.

Experimental analysis of energy savings and hygrothermal conditions improvement by means of air curtaines in stores with intensive pedestrian traffic

Current worldwide building legislation requirements aim to the design and construction of technical services that reduce energy consumption and improve indoor hygrothermal conditions. The retail sector in Spain, with a lot of outdated technical systems, demands energy conservation measures in order to reduce the increasingly electrical consumption for cooling. Climatic separation with modern air curtains and advanced hygrothermal control systems enables energy savings and can keep suitable indoor air temperature and humidity of stores with intense pedestrian traffic, especially when located in hot humid climates. As stated in the article, the energy savings in commercial buildings with these systems exceeds 30%

A procedure to track vibration modes under changing external factors: application to a pedestrian bridge

A low-cost vibration monitoring system has been developed and installed on an urban steel- plated stress-ribbon footbridge. The system continuously measures: the acceleration (using 18 triaxial MEMS accelerometers distributed along the structure), the ambient temperature and the wind velocity and direction. Automated output-only modal parameter estimation based on the Stochastic Subspace Identification (SSI) is carried out in order to extract the modal parameters, i.e., the natural frequencies, damping ratios and modal shapes. Thus, this paper analyzes the time evolution of the modal parameters over a whole-year data monitoring. Firstly, for similar environmental/operational factors, the uncertainties associated to the time window size used are studied and quantified. Secondly, a methodology to track the vibration modes has been established since several of them with closely-spaced natural frequencies are identified. Thirdly, the modal parameters have been correlated against external factors. It has been shown that this stress-ribbon structure is highly sensitive to temperature variation (frequency changes of more than 20%) with strongly seasonal and daily trends

Pedestrian wind comfort: feasibility study of criteria homogenisation

One of the aims of COST C14 action is the assessment and evaluation of pedestrian wind comfort. At present there is no general rule available that is applied across Europe. There are several criteria that have been developed and applied in different countries. These criteria are based on the definition of two independent parameters, a threshold effective wind speed and a probability of exceedence of this threshold speed. The difficulty of the criteria comparison arises from the two-dimensional character of the criteria definition. An effort is being made to compare these criteria, trying both to find commonalities and to clearly identify differences, in order to build up the basis for the next step: to try to define common criteria (perhaps with regional and seasonal variations). The first point is to define clearly the threshold effective wind speed (mean velocity definition parameters: averaging interval and reference height) and equivalence between different ways of defining the threshold effective wind speed (mean wind speed, gust equivalent mean, etc.) in comparable terms (as far as possible). It can be shown that if the wind speed at a given location is defined in terms of a probability distribution, e.g. Weibull function, a given criterion is satisfied by an infinite set of wind conditions, that is, of probability distributions. The criterion parameters and the Weibull function parameters are linked to each other, establishing a set called iso-criteria lines (the locus of the Weibull function parameters that fulfil a given criterion). The relative position of iso-criteria lines when displayed in a suitable two-dimensional plane facilitates the comparison of comfort criteria. The comparison of several wind comfort criteria, coming from several institutes is performed, showing the feasibility and limitations of the method.

Vehicle induced loads on pedestrian barriers

This paper is a continuation of a previous one, Sanz-Andrés, Santiago-Prowald, Baker and Quinn (J. Wind Eng. Ind. Aerodyn. 91 (2003) 925) concerning the loads generated on a structural panel (traffic sign) by vehicle running along the road, although obviously, the results are also applicable to the effects of other moving vehicles such as trains. The structural panel was modelized as a large plate whose largest dimension is perpendicular to the vehicle motion direction. In this paper a similar approach is used to develop a mathematical model for the vehicle-induced load on pedestrian barriers, modelized as a large plate whose largest dimension is parallel to the vehicle motion direction. The purpose of the work is to develop a model simple enough to give analytical results, although with the physical phenomena correctly accounted for, such as to be able to explain, at least qualitatively, the main characteristics of the phenomenon, as observed in the experiments performed by Quinn et al. (J. Wind Eng. Ind. Aerodyn. 89 (2001) 831). Actually, in spite of the model simplicity, results of the theoretical model show a reasonable good quantitative agreement with the experimental results. The aim of this and previous publications is to provide to the transport infrastructure community with some simple tools that can help to explain, and in some cases also to compute, the unsteady loading produced by moving vehicles on persons and installations placed close to the roads or tracks.

Pedestrian Motion Prediction: A Graph Based Approach

A novel pedestrian motion prediction technique is presented in this paper. Its main achievement regards to none previous observation, any knowledge of pedestrian trajectories nor the existence of possible destinations is required; hence making it useful for autonomous surveillance applications. Prediction only requires initial position of the pedestrian and a 2D representation of the scenario as occupancy grid. First, it uses the Fast Marching Method (FMM) to calculate the pedestrian arrival time for each position in the map and then, the likelihood that the pedestrian reaches those positions is estimated. The technique has been tested with synthetic and real scenarios. In all cases, accurate probability maps as well as their representative graphs were obtained with low computational cost.

Relaciones entre los usos del suelo, las infraestructuras y la planificación: incidencia de la red viaria y el planeamiento en la aparición del terciario para el caso de la N-VI

Esta tesis examina el papel de la red viaria y el planeamiento urbanístico en la localización de las actividades terciarias. A partir de los años sesenta se produce una modificación de los patrones de comportamiento espacial de las actividades productivas. En la raíz de estos cambios está los procesos de globalización e internacionalización de la economía y un importante aumento de la utilización vehículos privados. Todo ello da lugar a una preocupación entre los profesionales por la identificación de variables en esa organización espacial, y por la búsqueda de modelos que mejorasen las condiciones de competitividad en el entramado urbano, reclamado también la formulación de conceptos diferentes, capaces de entender los cambios territoriales de la reestructuración permanente en que viven las economías capitalistas avanzadas. En este marco, hay un aumento importante de las actividades terciarias o proceso de terciarización; que es el principio basilar para la suburbanización de este sector. Consiste, en buena medida, en unas necesidades de descentralización y dispersión de las actividades terciarias por todo el territorio, con demandas de nuevos espacios para todo tipo de actividades empresariales. Se va así generando un espacio urbano complejo, con nuevas actividades, distintas de la residencial, y con tipologías edificatorias diferentes: centros comerciales, hipermercados, zocos o edificios de empresas dedicadas a servicios avanzados y altamente cualificados. Adquiere, por tanto, un fuerte protagonismo los espacios periféricos de las grandes ciudades. En la transformación de este territorio interviene el planeamiento urbanístico porque prevé la ocupación del suelo y la forma de uso. Y también la carretera considerada clave en el desarrollo histórico de la ciudad. Consecuentemente, se impulsan una plétora de nuevas líneas de investigación y nuevas formas de aproximación al estudio de las relaciones entre las infraestructuras viarias y los usos del suelo. El interés del proyecto de investigación es, por todo ello, estudiar en que medida la localización del terciario depende del planeamiento urbano y de las variaciones en la red viaria. Es decir, la hipótesis de este trabajo se puede enunciar diciendo que: en la aparición del terciario inciden dos variables, el planeamiento urbanístico y la red viaria; lógicamente siendo consciente de la dificultad intrínseca de separar algún parámetro y sus relaciones de un sistema funcional urbano. Centrando este enfoque sobre el caso particular del corredor de la carretera de La Coruña (N-VI) situado en el oeste de la Comunidad de Madrid. Es un ámbito suburbano que comprende los términos municipales de Las Rozas y Majadahonda, un segmento del municipio de Madrid (abarca los barrios de Aravaca, el Plantío y Valdemarín, y una pequeña superficie de la Casa de Campo, Ciudad Universitaria y El Pardo), y la mitad septentrional del municipio de Pozuelo de Alarcón. La conclusión general a la que se ha llegado es que se trata de un fenómeno complejo, en el que se detecta que: A) La aprobación de un nuevo Plan Urbanístico no supone un cambio inmediato en la evolución cuantitativa de la implantación de actividades terciarias en edificio exclusivo en el área de estudio. B) Se evidencia una relación directa entre la implantación de una nueva infraestructura de transporte o modificación de algún elemento importante y el crecimiento de la localización de actividades terciarias. C) Resulta difícil verificar que cuando confluyen mejoras o nuevas construcciones en la red viaria y una estrategia en el planeamiento dirigida a la ordenación e intervención del espacio terciario, el número de edificios terciarios aumente. ABSTRACT This thesis examines the role of road networks and urban planning in the location of tertiary activities. Since the sixties there is a modification of spatial behavior patterns of production activities. At the root of these changes is the process of globalization and internationalization of the economy and a significant increase in private car use. This leads to a concern among professionals in the identification of variables in the spatial organization, and the search for models that would improve the competitive conditions in the urban framework, also called for the formulation of different concepts, able to understand the changes territorial restructuring that live permanently in the advanced capitalist economies. In this context, there is a significant increase in tertiary activities or process outsourcing, which is the beginning basilar to the suburbanization of the sector. It consists, in large part, on the Needs of decentralization and dispersal of tertiary activities throughout the territory, demands for new spaces for all types of business activities. It is thus generating a complex urban area, with new activities, other than residential and with different building typologies: shopping malls, hypermarkets, souks and buildings of companies engaged in advanced and highly skilled services. Thus takes strong role peripheral areas of big cities. In the transformation of this region is involved in providing for urban planning land use and how to use. And the road is considered key in the historical development of the city. Consequently, they are promoting a plethora of new research and new ways of approaching the study of the relationship between road infrastructure and land use. The interest of the research project is, for all that, consider to what extent depends on the location of tertiary urban planning and changes in the road network. That is, the hypothesis of this work can be stated by saying that: the emergence of two variables affecting tertiary, urban planning and road network, of course being aware of the inherent difficulty of separating any parameters and functional relationships of an urban. Approach focusing on the particular case of the road corridor from La Coruña (N-VI) located in the west of Madrid. It is a suburban area comprising the municipalities of Las Rozas and Majadahonda, a segment of the city of Madrid (covering the districts of Aravaca, the planting and Valdemarín, and a small area of the Casa de Campo, Ciudad Universitaria and El Pardo) , and the northern half of the town of Pozuelo de Alarcón. The general conclusion has been reached is that this is a complex phenomenon, which is detected: A) The approval of a new Urban Plan is not an immediate change in the quantitative evolution of the implementation of tertiary activities in exclusive building in the study area. B) It shows a direct relationship between the introduction of a new transport infrastructure or amendment to an important and growing element of the location of tertiary activities. C) It is difficult to verify that when improvements or new construction come together in the road network and planning a strategy aimed at the management and intervention of third space, the number of commercial buildings increases.

An energy-efficient strategy for combined RSS-PDR indoor localization

We propose an optimization-based framework to minimize the energy consumption in a sensor network when using an indoor localization system based on the combination of received signal strength (RSS) and pedestrian dead reckoning (PDR). The objective is to find the RSS localization frequency and the number of RSS measurements used at each localization round that jointly minimize the total consumed energy, while ensuring at the same time a desired accuracy in the localization result. The optimization approach leverages practical models to predict the localization error and the overall energy consumption for combined RSS-PDR localization systems. The performance of the proposed strategy is assessed through simulation, showing energy savings with respect to other approaches while guaranteeing a target accuracy.

Environmental assessment of low speed policies for motor vehicle mobility in city centres

streets in local residential areas in large cities, real traffic tests for pollutant emissions and fuel consumption have been carried out in Madrid city centre. Emission concentration and car activity were simultaneously measured by a Portable Emissions Measurement System. Real life tests carried out at different times and on different days were performed with a turbo-diesel engine light vehicle equipped with an oxidizer catalyst and using different driving styles with a previously trained driver. The results show that by reducing the speed limit from 50 km h-1 to 30 km h-1, using a normal driving style, the time taken for a given trip does not increase, but fuel consumption and NOx, CO and PM emissions are clearly reduced. Therefore, the main conclusion of this work is that reducing the speed limit in some narrow streets in residential and commercial areas or in a city not only increases pedestrian safety, but also contributes to reducing the environmental impact of motor vehicles and reducing fuel consumption. In addition, there is also a reduction in the greenhouse gas emissions resulting from the combustion of the fuel.

PDR with a foot-mounted IMU and ramp detection

The localization of persons in indoor environments is nowadays an open problem. There are partial solutions based on the deployment of a network of sensors (Local Positioning Systems or LPS). Other solutions only require the installation of an inertial sensor on the person’s body (Pedestrian Dead-Reckoning or PDR). PDR solutions integrate the signals coming from an Inertial Measurement Unit (IMU), which usually contains 3 accelerometers and 3 gyroscopes. The main problem of PDR is the accumulation of positioning errors due to the drift caused by the noise in the sensors. This paper presents a PDR solution that incorporates a drift correction method based on detecting the access ramps usually found in buildings. The ramp correction method is implemented over a PDR framework that uses an Inertial Navigation algorithm (INS) and an IMU attached to the person’s foot. Unlike other approaches that use external sensors to correct the drift error, we only use one IMU on the foot. To detect a ramp, the slope of the terrain on which the user is walking, and the change in height sensed when moving forward, are estimated from the IMU. After detection, the ramp is checked for association with one of the existing in a database. For each associated ramp, a position correction is fed into the Kalman Filter in order to refine the INS-PDR solution. Drift-free localization is achieved with positioning errors below 2 meters for 1,000-meter-long routes in a building with a few ramps.

Digital signage application : developing a public venue multimedia touch-screen

La señalización digital o digital signage es una tecnología de comunicaciones digital que se está usando en los últimos años para reemplazar a la antigua publicidad impresa. Esta tecnología mejora la presentación y promoción de los productos anunciados, así como facilita el intercambio de información gracias a su colocación en lugares públicos o al aire libre. Las aplicaciones con las que cuenta este nuevo método de publicidad son muy variadas, ya que pueden variar desde ambientes privados en empresas, hasta lugares públicos como centros comerciales. Aunque la primera y principal utilidad de la señalización digital es la publicidad para que el usuario sienta una necesidad de adquirir productos, también la posibilidad de ofrecer más información sobre determinados artículos a través de las nuevas tecnologías es muy importante en este campo. La aplicación realizada en este proyecto es el desarrollo de un programa en Adobe Flash a través de lenguaje de programación XML. A través de una pantalla táctil, el usuario de un museo puede interactivamente acceder a un menú en el que aparecen los diferentes estilos de arte en un determinado tiempo de la historia. A través de una línea de tiempo se puede acceder a información sobre cada objeto que esté expuesto en la exhibición. Además se pueden observar imágenes de los detalles más importantes del objeto que no pueden ser vistos a simple vista, ya que no está permitido manipularlos. El empleo de la pantalla interactiva sirve para el usuario de la exhibición como una herramienta extra para recabar información sobre lo que está viendo, a través de una tecnología nueva y fácil de usar para todo el mundo, ya que solo se necesita usar las propias manos. La facilidad de manejo en aplicaciones como estas es muy importante, ya que el usuario final puede no tener conocimientos tecnológicos por lo que la información debe darse claramente. Como conclusión, se puede decir que digital signage es un mercado que está en expansión y que las empresas deben invertir en el desarrollo de contenidos, ya que las tecnologías avanzan aunque el digital signage no lo haga, y este sector podría ser muy útil en un futuro no muy lejano, ya que la información que es capaz de transmitir al espectador en todos los lugares es mucho más válida y útil que la proporcionada por un simple póster impreso en una valla publicitaria. Abstract The Digital signage is a digital communications technology being used in recent years to replace the old advertising printed. This technology improves the presentation and promotion of the advertised products, and makes easy the exchange of information with its placement in public places or outdoors. The applications that account this new method of advertising are several; they can range from private rooms in companies, to public places like malls. Although the first major utility of Digital signage is the advertising that makes the user feel and need of purchasing products. In addition, the chance of providing more information about certain items through new technologies is very important in this field. The application made in this project is the development of a program in Adobe Flash via XML programming language. Through a touch-screen, a museum user can interactively access a menu in which different styles of art in a particular time in history appears. Through a timeline you can access to information about each object that is exposed on display. Also you can see pictures of the most important details of the object that can not be seen with the naked eye, since it is not allowed to manipulate it. The use of the interactive screen serves to the user exhibition as an extra tool to gather information about what is seeing through a new technology and easy to use for everyone, since only need to use one’s own hands. The ease of handling in applications such as this is very important as the end user may not have expertise technology so the information should be clearly. As conclusion, one can say digital signage is an expansion market and companies must invest in content development, as although digital technologies advance digital signage does not, and this sector could be very useful in a near future, because information that is able of transmitting the everywhere viewer is much more valid and useful than that provided by a simple printed poster on a billboard.