11 resultados para Organized labor

em Universidad Politécnica de Madrid


Relevância:

20.00% 20.00%

Publicador:

Resumo:

Nowadays, PBL is considered a suitable methodology for engineering education. But making the most of this methodology requires some features, such as multidisciplinary, illstructured teamwork and autonomous research that sometimes are not easy to achieve. In fact, traditional university systems, including curricula, teaching methodologies, assessment and regulation, do not help the implementation of these features. Firstly, we look through the main differences found between a traditional system and the Aalborg model, considered a reference point in PBL. Then, this work is aimed at detecting the main obstacles that a standing traditional system presents to PBL implementation. A multifaceted PBL experience, covering three different disciplines, brings us to analyse these difficulties, order them according to its importance and decide which should be the first changes. Finally, we propose a straightforward introduction of generic competences in the curricula aimed at supporting the use of Problem-Based Project-Organized Learning

Relevância:

20.00% 20.00%

Publicador:

Resumo:

El cumplimiento de los objetivos agrotécnicos de los cultivos de raíces y tubérculos exige que la labor de surcado configure un caballón que permita el trabajo de los posteriores aperos que participan en las demás labores de cultivo. En la agricultura cubana se emplean diversos tipos de surcadores que difieren en las características de los elementos aporcadores. Este hecho afecta a la capacidad de trabajo del conjunto tractor-apero y por extensión en el consumo de combustible y el rendimiento del cultivo. El objetivo de este trabajo ha sido fundamentar el empleo del apero más adecuado para la labor de surcado en cultivos de raíces y tubérculos (patata, boniato, yuca) en Fluvisoles, teniendo en cuenta el comportamiento de las dimensiones y forma del caballón, cualidades tecnológicas explotativas del conjunto tractor-apero, consumo energético del proceso productivo y el rendimiento agrícola. Los tratamientos considerados estuvieron determinados por la utilización del surcador fertilizador IIMA-BALDAN 4.500 (T1), y los surcadores aporcadores SA-5 (T2) y SA-3 (T3). En los tres tratamientos se alcanzó un perfil de la sección transversal del caballón de configuración cóncavo-convexo. El surcador BALDAN logró el mejor comportamiento de los indicadores tecnológico-explotativos lo que se tradujo en la mayor capacidad de trabajo de 1,36 ha h-1 y el menor consumo de combustible de 5,38 L ha-1. Este mismo tratamiento proporcionó el mayor rendimiento medio de los cultivos superando en un 43,2% al del surcador SA-5 y en un 57,9% al del surcador SA-3. Desde el punto de vista energético T1, obtuvo una mejor eficiencia energética superior en un 43,5% a la del tratamiento T2, y en un 57,1% a la del tratamiento T3. ABSTRACT The achievement of agrotechnical objectives in the cultivation of roots and tubers demands the plow through activity creates a ridge to allow the work of subsequent farming tools participating in other cultivation works. In Cuban Agriculture various kinds of furrowers are used which differ in the characteristics of their earth up elements. This fact affects work capacity of the tractor-farming tool combination and by extension to fuel consumption and cultivation yield. The aim of this work has been to support the use of the most accurate farming tool in the plow through activity for the cultivation of roots and tubers (potato, sweet potato, cassava) in Fluvisoils, taking into account the behaviour of the ridge´s dimensions and shape, technologic-explotative qualities of the tractor-farming tool combination, energy consumption of the productive process and agricultural yield. The treatments considered were determined by the use of fertlizing furrower IIMA-BALDAN 4.500 (T1), and the earth up furrowers SA-5 (T2) and SA-3 (T3). During the three treatments a transverse section profile of the ridge under concave-convex configuration was obtained. The furrower BALDAN achieved the best behaviour of the technologic-explotative indicators, which was translated into the largest work capacity of 1,36 ha h-1 and the smallest fuel consumption of 5,38 L ha-1. This treatment also provided the biggest average yield of the cultivation, overcoming in a 43,2% the furrower SA-5 and furrower SA-3 in a 57,9%. From the energetic point of view T1 gained better energetic efficiency than treatment T2 in a 43,5% and treatment T3 in a 57,1%.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

In recent decades, there has been an increasing interest in systems comprised of several autonomous mobile robots, and as a result, there has been a substantial amount of development in the eld of Articial Intelligence, especially in Robotics. There are several studies in the literature by some researchers from the scientic community that focus on the creation of intelligent machines and devices capable to imitate the functions and movements of living beings. Multi-Robot Systems (MRS) can often deal with tasks that are dicult, if not impossible, to be accomplished by a single robot. In the context of MRS, one of the main challenges is the need to control, coordinate and synchronize the operation of multiple robots to perform a specic task. This requires the development of new strategies and methods which allow us to obtain the desired system behavior in a formal and concise way. This PhD thesis aims to study the coordination of multi-robot systems, in particular, addresses the problem of the distribution of heterogeneous multi-tasks. The main interest in these systems is to understand how from simple rules inspired by the division of labor in social insects, a group of robots can perform tasks in an organized and coordinated way. We are mainly interested on truly distributed or decentralized solutions in which the robots themselves, autonomously and in an individual manner, select a particular task so that all tasks are optimally distributed. In general, to perform the multi-tasks distribution among a team of robots, they have to synchronize their actions and exchange information. Under this approach we can speak of multi-tasks selection instead of multi-tasks assignment, which means, that the agents or robots select the tasks instead of being assigned a task by a central controller. The key element in these algorithms is the estimation ix of the stimuli and the adaptive update of the thresholds. This means that each robot performs this estimate locally depending on the load or the number of pending tasks to be performed. In addition, it is very interesting the evaluation of the results in function in each approach, comparing the results obtained by the introducing noise in the number of pending loads, with the purpose of simulate the robot's error in estimating the real number of pending tasks. The main contribution of this thesis can be found in the approach based on self-organization and division of labor in social insects. An experimental scenario for the coordination problem among multiple robots, the robustness of the approaches and the generation of dynamic tasks have been presented and discussed. The particular issues studied are: Threshold models: It presents the experiments conducted to test the response threshold model with the objective to analyze the system performance index, for the problem of the distribution of heterogeneous multitasks in multi-robot systems; also has been introduced additive noise in the number of pending loads and has been generated dynamic tasks over time. Learning automata methods: It describes the experiments to test the learning automata-based probabilistic algorithms. The approach was tested to evaluate the system performance index with additive noise and with dynamic tasks generation for the same problem of the distribution of heterogeneous multi-tasks in multi-robot systems. Ant colony optimization: The goal of the experiments presented is to test the ant colony optimization-based deterministic algorithms, to achieve the distribution of heterogeneous multi-tasks in multi-robot systems. In the experiments performed, the system performance index is evaluated by introducing additive noise and dynamic tasks generation over time.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

La norma UNE 153010:2003 recogía requisitos para el subtitulado para personas sordas a través de teletexto. Fue el resultado de varios años de trabajo en el Subcomité 5 del Comité Técnico de Normalización (CTN) 153 de AENOR. Los cambios en los últimos años en cuanto a los medios audiovisuales llevaron a dicho Subcomité a plantearse en el año 2008 la posibilidad de actualizar los contenidos de esta norma, con el fin de adaptarse a nuevas tecnologías, como los DVD, la televisión digital o la televisión emitida a través de Internet. Inicialmente se planteó la posibilidad de realizar normas específicas de subtitulado para cada tecnología de emisión, pero finalmente se decidió desarrollar una norma general de subtitulado que fuera de aplicación general. Tras un largo periodo de trabajo, la nueva versión de la norma UNE 153010 está a punto de ver la luz, dado que se encuentra en periodo de información pública. En este artículo se narra el proceso de desarrollo de esta norma y se describe los aspectos más importantes de la misma, resultado de una intensa labor con gran voluntad de consenso por parte de las entidades implicadas.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Estudio analítico del tipo de vivienda de labradores en Extremadura como ejemplo de arquitectura popular doméstica.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Spanish Young Generation in Nuclear (Jóvenes Nucleares, JJNN) is a non-profrt organization that depends on the Spanish Nuclear Society (Sociedad Nuclear Española, SNE).Since one of rts main goals is to spread the knowledge about nuclear power,severa! technical tours to facilities wrth an importan!role in the nuclear fuel cycle have been organized for the purpose ofleaming about the different stages of the Spanish tuel cycle. Spanish Young Generation in Nuclear had the opportunity to visit ENUSA Fuel Assembly Factory in Juzbado (Salamanca, Spain), Where it could be understood the front-end cycle which involves the uranium supply and storage, design and manufacturing of fuel bundles for European nuclear power plants. Alterwards, due to the tour of Almaraz NPP (PWR) and Santa María de Garoña NPP (BWR), rt could be comprehended how to obtain energy from this fuel in two different types of reactors.Furthermore,in these two plants, the facilities related to the back-end cycle could be toured. lt was possible to watch the Spent FuelPools, where the fuel bundles are stored under water until their activity is reduced enough to transport them to an Individual Temporary Storage Facility orto the Centralized Temporary Storage. Finally, a technical tour to ENSA Heavy Components Factory (ENSA) was accomplished, Where it could be experienced at first hand how different Nuclear Steam Supply System (NSSS) components and other nuclear elements, such as racks or shipping and storage casks for spent nuclear fuel, are manulactured. All these perlonned technical tours were a complete success thanks to a generous care and know-how of the wor1

Relevância:

20.00% 20.00%

Publicador:

Resumo:

A colloidal deposition technique is presented to construct long-range ordered hybrid arrays of self-assembled quantum dots and metal nanoparticles. Quantum dots are promising for novel opto-electronic devices but, in most cases, their optical transitions of interest lack sufficient light absorption to provide a significant impact in their implementation. A potential solution is to couple the dots with localized plasmons in metal nanoparticles. The extreme confinement of light in the near-field produced by the nanoparticles can potentially boost the absorption in the quantum dots by up to two orders of magnitude. In this work, light extinction measurements are employed to probe the plasmon resonance of spherical gold nanoparticles in lead sulfide colloidal quantum dots and amorphous silicon thin-films. Mie theory computations are used to analyze the experimental results and determine the absorption enhancement that can be generated by the highly intense near-field produced in the vicinity of the gold nanoparticles at their surface plasmon resonance. The results presented here are of interest for the development of plasmon-enhanced colloidal nanostructured photovoltaic materials, such as colloidal quantum dot intermediate-band solar cells.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Entrevista personal. Alfredo Blanco, Premio UPM Investigación para el Desarrollo.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Division of labor is a widely studied aspect of colony behavior of social insects. Division of labor models indicate how individuals distribute themselves in order to perform different tasks simultaneously. However, models that study division of labor from a dynamical system point of view cannot be found in the literature. In this paper, we define a division of labor model as a discrete-time dynamical system, in order to study the equilibrium points and their properties related to convergence and stability. By making use of this analytical model, an adaptive algorithm based on division of labor can be designed to satisfy dynamic criteria. In this way, we have designed and tested an algorithm that varies the response thresholds in order to modify the dynamic behavior of the system. This behavior modification allows the system to adapt to specific environmental and collective situations, making the algorithm a good candidate for distributed control applications. The variable threshold algorithm is based on specialization mechanisms. It is able to achieve an asymptotically stable behavior of the system in different environments and independently of the number of individuals. The algorithm has been successfully tested under several initial conditions and number of individuals.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Las limitaciones en la capacidad de movilidad pueden ser consideradas en la actualidad como una forma de discriminación tremenda y a la vez invisible dentro de la sociedad. Para poder evitar esta discriminación es necesario que las políticas de transporte, que hasta ahora han basado sus actuaciones particularmente sobre las necesidades de acceso al empleo, reconozcan las exigencias de las personas dependientes y de aquellas que realizan las tareas no remuneradas del cuidado de otros y de atención a la familia. Las personas que trabajan en las tareas domésticas, en la mayoría de los casos mujeres, tienen muchas dificultades para sincronizar sus obligaciones con los tiempos y las distancias. Estas personas desempeñan un trabajo diario, que tiene lugar tanto fuera como dentro del hogar y tienen necesidades específicas de movilidad. El problema principal es que este tipo de trabajo no suele ser tomado en consideración, ya que no entra en la esfera del trabajo remunerado. Pero es una labor que está estrictamente ligada a la actividad de la sociedad y es un elemento indispensable para el funcionamiento de la vida urbana. Es un trabajo real, que tiene lugar en el espacio urbano, que exige un considerable esfuerzo físico y emocional, y que ayuda a garantizar la calidad de la vida cotidiana. Es un aspecto indispensable a tener en cuenta en el ejercicio de las políticas públicas y sociales. Sobre la base de estas consideraciones se introduce el concepto “Movilidad del cuidado” (Sánchez de Madariaga, 2009a y 2009b), mediante el cual se reconoce la necesidad de evaluar y hacer visible los desplazamientos diarios asociados con el trabajo del cuidado. Por trabajo del cuidado se entiende el trabajo no remunerado, realizado por los adultos para los niños u otras personas dependientes, incluido el trabajo relacionado con el mantenimiento del hogar. El análisis de este tipo de viajes exige ciertos cambios significativos en las formas de recoger datos estadísticos. No se trata solo de sumar los desplazamientos que actualmente aparecen en las estadísticas como viajes de compras, acompañamiento, gestiones, cuidado de otros, etc. El problema es que los datos sobre movilidad se recogen con una serie de sesgos que infravaloran los viajes de cuidado: las estadísticas no cuentan los viajes cortos a pie y tampoco reflejan bien los viajes encadenados, ambos típicamente femeninos; no se deslindan con precisión los viajes de cuidado de otro tipo de viajes, de manera que muchos desplazamientos relacionados con la esfera reproductiva aparecen como viajes personales o de ocio y en muchos casos se encasillan en la categoría otros. Mediante esta investigación se pretende estimar el peso que la movilidad del cuidado tiene en el total de la movilidad y describirla de manera precisa en un contexto geográfico determinado, en el caso específico Madrid. Los estudios sobre el tema realizados hasta el momento reconocen la necesidad de llevar a cabo encuestas de movilidad que tengan en cuenta las variables socio económicas que caracterizan a la población y también se demanda la segregación de los datos recogidos por sexo, así como el uso del género como una categoría analítica. Igualmente es indispensable atribuir la misma importancia que tienen los viajes relacionados con la esfera productiva a los que están relacionados con la esfera reproductiva. No obstante, es solo mediante la introducción del concepto de “movilidad del cuidado” que se propone una nueva categorización de los motivos de desplazamiento dentro de las “clásicas” encuestas de movilidad y, por primera vez, mediante esta investigación se aplica este concepto a un ejemplo práctico a partir del cual queda en evidencia la necesidad de un cambio de enfoque en las políticas de transporte. Así, a través el uso de encuestas cuantitativas y cualitativas realizadas ad hoc sobre la base de la metodología propuesta, se capturan los patrones de viajes significativos para poder describir en maneara exhaustiva la movilidad de las personas que tienen responsabilidades de cuidado. El objetivo es crear una base de conocimiento más amplia sobre los patrones de movilidad, comportamientos y necesidades, además de mejorar los conceptos operacionales y establecer políticas de transporte más equitativas, que respondan de mejor manera a las necesidades de género, beneficiando así a toda la sociedad. ABSTRACT Nowadays, limitations in urban mobility can be considered as some type of extreme discrimination, which remains invisible to the society. In order to avoid this kind of discrimination, new transport policies are required, especially considering that so far they have been based and organized particularly in relation to the needs derived from the access to employment. These policies must take into account the demands of people depending on the support of others as well as of unpaid caregivers in charge of looking after other individuals and taking care of the family. Most of the people devoted to domestic work, which in the vast majority of cases is carried out by women, find it difficult to coordinate their obligations with time and distances. These people carry out a daily job that takes place both inside their homes as well as outside, and they have specific mobility needs. The main issue is that this type of work is usually not taken into consideration, since it is not included under the scope of paid employment. However, this work is strictly related to the activities of society and is therefore a crucial element in the functioning of urban life. It is an actual job that takes place in an urban space, requires a considerable amount of physical and emotional effort and guarantees quality of life on a daily basis. This is an important aspect that should be taken into account when drafting public and social policies. The concept of “Mobility of care” (Sánchez de Madariaga, 2009a and 2009b) is introduced under these considerations. This concept acknowledges the need to evaluate and identify daily movements from one place to another that are related to caregiving. Caregiving is understood, in this case, as unpaid work that is carried out by adults for children and other people that depend on the support of others, and it also includes duties related to home maintenance. The analysis of these types of movements requires some significant changes in the way in which statistic data is gathered. The idea is to not only add up the movements that appear in statistics such as shopping trips, accompanying someone, dealings, caregiving, etc. The problem with data on mobility is that it is gathered with bias that undervalues mobility related to caregiving: statistics do not take into consideration short trips that are made walking nor do they properly reflect connected trips, both of which are typically feminine; moreover, there is an imprecise differentiation of trips related to caregiving and other kind of trips, and because of that, many of the trips related to the reproductive sphere are considered personal or recreational trips, and are many times labelled as others. This investigation aims to evaluate the importance that mobility of care has in mobility in general, describing it in a precise manner within a specific geographical context that in this case is Madrid. To this date, most of the studies on this subject have acknowledged the need to carry out mobility surveys that include socio economic variables that characterize the population and they have also requested that collected data is segregated by sex and that gender is used as an analytical category. Likewise, it is fundamental to give the same importance to mobility related to the sphere of reproduction as to that related to the sphere of productiveness. However, it is only through the implementation of the concept of “mobility of care” that a new categorization of mobility, within classic mobility surveys, is proposed. Also, for the first time and by this investigation, this concept is applied to a practical case, shining a light on the need to change the focus of transport policies. Through the use of ad hoc quantitative and qualitative surveys based on the proposed methodology, the patterns of relevant movements are identified in order to thoroughly describe the mobility of people responsible of caregiving. The aim is to create a broader knowledge base on patterns of mobility, behaviour and necessities, in addition to improving functional concepts and transport policies to make them more equitable and responsive to gender needs, thus benefitting society as a whole.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The influence of training in labor risk prevention and the development of the resulting pre-emptive culture are analyzed within this paper. In order to achieve this, a quantitative analysis of the students of Building Degree in the Technic University of Madrid has been developed. This study has been made in all grades, valuating the previous knowledge acquired during compulsory education. It must be kept in mind that the students in 3rd and 4th grade have received general and specific compulsory training in prevention and safety in the building sector.