Chemical speciation and mobilization of copper and zinc in naturally contaminated mine soils with citric and tartaric acids

A one-step extraction procedure and a leaching column experiment were performed to assess the effects of citric and tartaric acids on Cu and Zn mobilization in naturally contaminated mine soils to facilitate assisted phytoextraction. A speciation modeling of the soil solution and the metal fractionation of soils were performed to elucidate the chemical processes that affected metal desorption by organic acids. Different extracting solutions were prepared, all of which contained 0.01 M KNO3 and different concentrations of organic acids: control without organic acids, 0.5 mM citric, 0.5 mM tartaric, 10 mM citric, 10 mM tartaric, and 5 mM citric +5 mM tartaric. The results of the extraction procedure showed that higher concentrations of organic acids increased metal desorption, and citric acid was more effective at facilitating metal desorption than tartaric acid. Metal desorption was mainly influenced by the decreasing pH and the dissolution of Fe and Mn oxides, not by the formation of soluble metal–organic complexes as was predicted by the speciation modeling. The results of the column study reported that low concentrations of organic acids did not significantly increase metal mobilization and that higher doses were also not able to mobilize Zn. However, 5–10 mM citric acid significantly promoted Cu mobilization (from 1 mg kg−1 in the control to 42 mg kg−1 with 10 mM citric acid) and reduced the exchangeable (from 21 to 3 mg kg−1) and the Fe and Mn oxides (from 443 to 277 mg kg−1) fractions. Citric acid could efficiently facilitate assisted phytoextraction techniques.

Phytostabilization of metals in mine soils using Brassica juncea in combination with organic amendments

Background and aims The high metal bioavailability and the poor conditions of mine soils yield a low plant biomass, limiting the application of phytoremediation techniques. A greenhouse experiment was performed to evaluate the effects of organic amendments on metal stabilization and the potential of Brassica juncea L. for phytostabilization in mine soils. Methods Plants were grown in pots filled with soils collected from two mine sites located in Central Spain mixed with 0, 30 and 60 tha?1 of pine bark compost and horse- and sheep-manure compost. Plant biomass and metal concentrations in roots and shoots were measured. Metal bioavailability was assessed using a rhizosphere-based method (rhizo), which consists of a mixture of low-molecular-weight organic acids to simulate root exudates. Results Manure reduced metal concentrations in shoots (10?50 % reduction of Cu and 40?80 % of Zn in comparison with non-amended soils), bioconcentration factor (10?50 % of Cu and 40?80 % of Zn) and metal bioavailability in soil (40?50 % of Cu and 10?30 % of Zn) due to the high pH and the contribution of organic matter. Manure improved soil fertility and was also able to increase plant biomass (5?20 times in shoots and 3?30 times in roots), which resulted in a greater amount of metals removed from soil and accumulated in roots (increase of 2?7 times of Cu and Zn). Plants grown in pine bark treatments and in non-amended soils showed a limited biomass and high metal concentrations in shoots. Conclusions The addition of manure could be effective for the stabilization of metals and for enhancing the phytostabilization ability of B. juncea in mine soils. In this study, this species resulted to be a potential candidate for phytostabilization in combination with manure, differing from previous results, in which B. juncea had been recognized as a phytoextraction plant.

Functional, structural and phylogenetic analysis of domains underlying the Al sensitivity of the aluminum-activated malate/anion transporter, TaALMT1.

Triticum aestivum aluminum-activated malate transporter (TaALMT1) is the founding member of a unique gene family of anion transporters (ALMTs) that mediate the efflux of organic acids. A small sub-group of root-localized ALMTs, including TaALMT1, is physiologically associated with in planta aluminum (Al) resistance. TaALMT1 exhibits significant enhancement of transport activity in response to extracellular Al. In this study, we integrated structure–function analyses of structurally altered TaALMT1 proteins expressed in Xenopus oocytes with phylogenic analyses of the ALMT family. Our aim is to re-examine the role of protein domains in terms of their potential involvement in the Al-dependent enhancement (i.e. Al-responsiveness) of TaALMT1 transport activity, as well as the roles of all its 43 negatively charged amino acid residues. Our results indicate that the N-domain, which is predicted to form the conductive pathway, mediates ion transport even in the absence of the C-domain. However, segments in both domains are involved in Al3+ sensing. We identified two regions, one at the N-terminus and a hydrophobic region at the C-terminus, that jointly contribute to the Al-response phenotype. Interestingly, the characteristic motif at the N-terminus appears to be specific for Al-responsive ALMTs. Our study highlights the need to include a comprehensive phylogenetic analysis when drawing inferences from structure–function analyses, as a significant proportion of the functional changes observed for TaALMT1 are most likely the result of alterations in the overall structural integrity of ALMT family proteins rather than modifications of specific sites involved in Al3+ sensing.

Estudio microestructural de pastas de cemento expuestas a medios simulados de agresividad moderada frecuentes en ambientes rurales

Los materiales base cemento (pastas, morteros, hormigones y otros tipos de mezclas) son materiales ampliamente utilizados en la sociedad actual y son uno de los pilares de la ingeniería civil debido a sus buenas propiedades estructurales, facilidad de fabricación y bajo coste. Sus propiedades permiten su uso en ambientes industriales y naturales, siendo materiales muy versátiles siempre y cuando, se tenga en cuenta que sus propiedades durables son limitadas en ambientes donde se producen fenómenos de lixiviación y ataque por diversos iones agresivos. El presente proyecto de investigación se desarrolló motivado por la necesidad de profundizar en el conocimiento del comportamiento de los materiales base cemento en situaciones concretas de exposición a cierto tipo de degradaciones que se producen frecuentemente en explotaciones agropecuarias ubicadas en ambientes naturales. Se diseñó un procedimiento experimental que nos permitiese evaluar el efecto que tienen los ácidos orgánicos sobre la matriz cementicia, así como la acción que presentan los sulfatos y las aguas naturales en los mismos. Teniendo muy presente siempre las características de las disoluciones a las cuales se ha expuesto el material. En último término, se trata de conocer los mecanismos de los procesos de ataque para poder definir el comportamiento del material en estos medios. Los procedimientos de ensayo, así como las técnicas de caracterización son las herramientas fundamentales con las que profundizar en el conocimiento del material, por lo que resulta de vital importancia conocer a fondo las posibilidades que su empleo nos ofrece. En el presente trabajo se ha desarrollado un profundo estudio del uso del termoanálisis en la caracterización de pastas de cemento. Además se han optimizado los procedimientos de caracterización de las muestras con otro tipo de técnicas. La caracterización de las probetas nos ha permitido comprobar el comportamiento del material en situaciones de exposición en ensayos acelerados de laboratorio. Los resultados obtenidos han permitido determinar que el pH del medio agresivo es una variable fundamental cuando se trata de evaluar la agresividad del mismo. La presencia de ciertos iones desarrollaría efectos de sinergia con respecto al pH y condicionaría los valores de las constantes termodinámicas que rigen los equilibrios. La posibilidad de formación de sales de ácidos orgánicos y la diferente solubilidad de las mismas derivaría en cambios en los comportamientos mecánicos. La proporción de compuestos de aluminio o la presencia de puzolanas capaces de fijar el calcio son también factores evidenciados como determinantes en el comportamiento del material. Además se podría afirmar que la disolución de la portlandita es un efecto determinante en el proceso de degradación. Nowadays, cement based materials (pastes, mortars, concrete and other mixtures) are widely used. These kinds of material are one of the pillars of Civil Engineering due to their structural properties, easy manufacturing and low cost. Their properties allow the use in industrial and natural environments. They are very versatile materials for use in this type of environment. But it is necessary to to keep in mind that they have a durability limited when they are exposed to aggressives environments where leaching process occur and various aggressive ions can damage the materials. This research work was developed motivated by the need to go in dept in the knoledge of the behavior of cement based materials. These kinds of materials frecuently are exposed to some types of damage that occur on farms located in natural environments. An experimental procedure that would allow us to evaluate the effect of organic acids on the cement matrix and the action presented by sulfates and natural waters in the same was designed. Always bearing in mind the characteristics of the solutions to which the material is exposed. Ultimately it comes to understanding the mechanisms of the processes leading to define the material behavior in this type of environment. Test procedures and characterization techniques are fundamental tools which to deepen the knowledge of the material, so it is important to know in its potential uses. In this work we have developed a deep study of the use of thermal analysis in the characterization of cement pastes. Furthermore, we have optimized characterization procedures of samples with other techniques. The characterization of the samples has allowed us to check the behavior of the material on exposure to accelerated laboratory tests. The results have established that the pH of the corrosive media is a fundamental variable when it comes to assessing the aggressiveness of it. The presences of certain ions develop synergies with respect to pH and would determine the values of the constants governing thermodynamic equilibria. The possible formation of salts of organic acids and the different solubility of the same would lead to changes in mechanical behavior. The proportion of aluminum compounds or the presence of pozzolans capable of binding calcium is also evidenced as determining factors in the material behavior. Besides we could assert that the dissolution of the portlandite is a determining effect on the degradation process.

Effects of nutrition on digestión efficiency and gaseous emissions from slurry in growing pigs: III. Influence of varying the dietary level of calcium soap of palm fatty acids distillate with or without orange pulp supplemention

The aim of this study was to establish the relationships between faecal fat concentration and gaseous emissions from pig slurry. Five diets were designed to meet essential nutrient requirements: a control and four experimental feeds including two levels (35 or 70 g/kg) of calcium soap fatty acids distillate (CSP) and 0 or 200 g/kg of orange pulp (OP) combined in a 2 × 2 factorial structure. Thirty growing pigs (six per treatment) were used to measure dry matter (DM) and N balance, coefficients of total tract apparent digestibility (CTTAD) of nutrients, faecal and urine composition and potential emissions of ammonia (NH3) and methane (CH4). Increasing dietary CSP level decreased DM, ether extract (EE) and crude protein (CP) CTTAD (by 4.0, 11.1 and 3.5%, respectively, P < 0.05), but did not influence those of fibrous constituents. It also led to a decrease (from 475 to 412 g/kg DM, P < 0.001) of faecal concentration of neutral detergent fibre (aNDFom) and to an increment (from 138 to 204 g/kg, P < 0.001) of EE in faecal DM that was related to greater CH4 emissions, both per gram of organic matter (P = 0.021) or on a daily basis (P < 0.001). Level of CSP did not affect N content in faeces or urine, but increased daily DM (P < 0.001), and N (P = 0.031) faecal excretion with no effect on urine N excretion. This resulted in lesser (P = 0.036) NH3 potential emission per kg of slurry. Addition of OP decreased CTTAD of EE (by 7.9%, P = 0.044), but increased (P < 0.05) that of all the fibrous fractions. As a consequence, faecal EE content increased (from 165 to 177 g/kg DM; P = 0.012), and aNDFom decreased greatly (from 483 to 404 g/kg DM, P < 0.001), which in all resulted in a lack of effect of OP on CH4 potential emission. Inclusion of OP in the diet also led to a significant decrease of CP CTTAD (by 6.85%, P < 0.001), and to an increase of faecal CP concentration (from 174 to 226 g/kg DM, P < 0.001), with no significant influence on urine N content. These effects resulted in higher N faecal losses, especially those of the undigested dietary origin, without significant effects on potential NH3 emission. No significant interactions between CSP and OP supplementation were observed for the gaseous emissions measured.