Optical Multistability and Oscillations in Hybrid Optical Bistable Systems with Short Delay Times

Optical instabilities in the output light from a bistable optical device (BOD) with a delayed feedback was predicted by Ikeda [1]. Gibbs et al. [2] gave the first experimental verification of this type of instabilities. From that time several groups have studied the instabilities of the BOD for different relations between the delay time tR and the time constant ح of the system. In a previous paper [3] an empirical and analytical study of instabilities in hybrid BOD was reported by us. The employed set up is shown in Fig. 1.

Transmission of digital chaotic and information-bearing signals in optical communication systems

A new proposal to have secure communications in a system is reported. The basis is the use of a synchronized digital chaotic systems, sending the information signal added to an initial chaos. The received signal is analyzed by another chaos generator located at the receiver and, by a logic boolean function of the chaotic and the received signals, the original information is recovered. One of the most important facts of this system is that the bandwidth needed by the system remain the same with and without chaos.

Empirical and analytical study of instabilities in hybrid optical bistable systems

As it is well known from the work by Gibbs et al., optical turbulence and periodic oscillations are easily seen in hybrid optical bistable devices when a delay is added to the feedback. Such effects, as it was pointed out by Gibbs, may be used to convert cw laser power into a train of light pulses.

New active devices in optical fibre communications: optical bistable systems

In this paper will be identify some fundamental mechanisms concerning optical bistability in some active devices.

Optical signal processing with electrooptic modulators and dispersion

A review of the main techniques that have been proposed for temporal processing of optical pulses that are the counterpart of the well-known spatial arrangements will be presented. They are translated to the temporal domain via the space-time duality and implemented with electrooptical phase and amplitude modulators and dispersive devices. We will introduce new variations of the conventional approaches and we will focus on their application to optical communications systems

The counteractive effect of the sensor housing on the unit sensitivity across a series of dynamic temperature profiles.

The advantages of wireless sensing implemented on the cold chain of fresh products are well known. These sensor systems consist of a combination of delicate internal electronic circuitry enclosed in a special housing unit. Manufacturers however are presented with the challenge that the housing required to withstand the harsh environment in which the sensors are being used all too often take from the functionality of the sensor. Therefore the target of this study is to determine the dynamic behavior and the counteractive effects of the sensor housing on temperature recording accuracy in the wireless nodes of Wireless Sensor Network (WSN) and Radio Frequency Identification (RFID) semi-passive tags. Two kind of semi-passive Turbo Tags were used (T700 and T702-B), which consisted of sensors with and without a cover, and two kind of WSN nodes, IRIS (sensors Intersema and Sensirion soldered in the motherboard) and NLAZA (Sensirion in a cable and soldered to the motherboard). To recreate the temperature profiles the devices were rotated between a cold room(5 ºC) through a ambient room(23 ºC) to a heated environment (35ºC) and vice versa. Analysis revealed the differences between housing and no housing are 308.22s to 21.99s respectively in the step from 5 to 35 ºC. As is demonstrated in these experiments the influence of the housing significantly hinders sensor accuracy.

A method to obtain the thermal parameters and the photothermal transduction efficiency in an optical hyperthermia device based on laser irradiation of gold nanoparticles

Optical hyperthermia systems based on the laser irradiation of gold nanorods seem to be a promising tool in the development of therapies against cancer. After a proof of concept in which the authors demonstrated the efficiency of this kind of systems, a modeling process based on an equivalent thermal-electric circuit has been carried out to determine the thermal parameters of the system and an energy balance obtained from the time-dependent heating and cooling temperature curves of the irradiated samples in order to obtain the photothermal transduction efficiency. By knowing this parameter, it is possible to increase the effectiveness of the treatments, thanks to the possibility of predicting the response of the device depending on the working configuration. As an example, the thermal behavior of two different kinds of nanoparticles is compared. The results show that, under identical conditions, the use of PEGylated gold nanorods allows for a more efficient heating compared with bare nanorods, and therefore, it results in a more effective therapy.

Desarrollo de una GUI para el estudio de Sistemas de Comunicaciones Ópticas

El peso específico de las Comunicaciones Ópticas dentro del ámbito de la Ingeniería de Telecomunicación no cesa de crecer. Sus aplicaciones, inicialmente dedicadas a las grandes líneas que enlazan las centrales de conmutación, alcanzan en la actualidad, como se ha mencionado, hasta los mismos hogares. Los progresos en este campo, con una sucesión sin tregua, no sólo se destinan a incrementar la capacidad de transmisión de los sistemas, sino a ampliar la diversidad de los procesos que sobre las señales se efectúan en el dominio óptico. Este dinamismo demanda a los profesionales del sector una revisión y actualización de sus conocimientos que les permitan resolver con soltura las cuestiones de su actividad de ingeniería. Por otra parte, durante los últimos años la importancia de las Comunicaciones Ópticas también se ha reflejado en las diferentes titulaciones de Ingenierías de Telecomunicación, cuyos planes de estudio contemplan esta materia tanto en asignaturas troncales como optativas. A menudo, las fuentes de información disponibles abordan esta disciplina con una orientación principalmente teórica. Profesionales y estudiantes de Ingeniería, pues, frente a esta materia se encuentran unos temas que tratan fenómenos físicos complejos, abundantes en conceptos abstractos y con un florido aparato matemático, pero muchas veces carentes de una visión práctica, importantísima en ingeniería, y que es, en definitiva, lo que se exige a alumnos e ingenieros: saber resolver problemas y cuestiones relacionados con las Comunicaciones Ópticas. Los sistemas de comunicaciones ópticas, y en especial aquellos que utilizan la fibra óptica como medio para la transmisión de información, como se ha dicho, están alcanzando un desarrollo importante en el campo de las telecomunicaciones. Las bondades que ofrece la fibra, de sobra conocidos y mencionados en el apartado que antecede (gran ancho de banda, inmunidad total a las perturbaciones de origen electromagnético, así como la no producción de interferencias, baja atenuación, etc.), han hecho que, hoy en día, sea uno de los campos de las llamadas tecnologías de la información y la comunicación que presente mayor interés por parte de científicos, ingenieros, operadores de telecomunicaciones y, por supuesto, usuarios. Ante esta realidad, el objetivo y justificación de la realización de este proyecto, por tanto, no es otro que el de acercar esta tecnología al futuro ingeniero de telecomunicaciones, y/o a cualquier persona con un mínimo de interés en este tema, y mostrarle de una forma práctica y visual los diferentes fenómenos que tienen lugar en la transmisión de información por medio de fibra óptica, así como los diferentes bloques y dispositivos en que se divide dicha comunicación. Para conseguir tal objetivo, el proyecto fin de carrera aquí presentado tiene como misión el desarrollo de una interfaz gráfica de usuario (GUI, del inglés Graphic User Interface) que permita a aquel que la utilice configurar de manera sencilla cada uno de los bloques en que se compone un enlace punto a punto de fibra óptica. Cada bloque en que se divide este enlace estará compuesto por varias opciones, que al elegir y configurar como se quiera, hará variar el comportamiento del sistema y presentará al usuario los diferentes fenómenos presentes en un sistema de comunicaciones ópticas, como son el ruido, la dispersión, la atenuación, etc., para una mejor comprensión e interiorización de la teoría estudiada. Por tanto, la aplicación, implementada en MATLAB, fruto de la realización de este PFC pretende servir de complemento práctico para las asignaturas dedicadas al estudio de las comunicaciones ópticas a estudiantes en un entorno amigable e intuitivo. Optical Communications in the field of Telecommunications Engineering continues to grow. Its applications, initially dedicated to large central lines that link the switching currently achieved, as mentioned, to the same household nowadays. Progress in this field, with a relentless succession, not only destined to increase the transmission capacity of the systems, but to broaden the diversity of the processes that are performed on the signals in the optical domain. This demands to professionals reviewing and updating their skills to enable them resolve issues easily. Moreover, in recent years the importance of optical communications is also reflected in the different degrees of Telecommunications Engineering, whose curriculum contemplates this area. Often, the information sources available to tackle this discipline mainly theoretical orientation. Engineering professionals and students are faced this matter are few topics discussing complex physical phenomena, and abstract concepts abundant with a flowery mathematical apparatus, but often wotput a practical, important in engineering, and that is what is required of students and engineers: knowing how to solve problems and issues related to optical communications. Optical communications systems, particularly those using optical fiber as a medium for transmission of information, as stated, are reaching a significant development in the field of telecommunications. The advantages offered by the fiber, well known and referred to in the preceding paragraph (high bandwidth, immunity to electromagnetic disturbances of origin and production of non interference, low attenuation, etc..), have made today, is one of the fields of information and communication technology that this increased interest by scientists, engineers, telecommunications operators and, of course, users. Given this reality, the purpose and justification of this project is not other than to bring this technology to the future telecommunications engineer, and / or anyone with a passing interest in this subject, and showing of a practical and various visual phenomena occurring in the transmission of information by optical fiber, as well as different blocks and devices in which said communication is divided. To achieve that objective, the final project presented here has as its mission the development of a graphical user interface (GUI) that allows the user to configure each of the blocks in which divided a point-to-point optical fiber. Each block into which this link will consist of several options to choose and configure it as you like, this will change the behavior of the system and will present to the user with the different phenomena occurring in an optical communication system, such as noise, dispersion, attenuation, etc., for better understanding and internalization of the theory studied. Therefore, the application, implemented in MATLAB, the result of the completion of the thesis is intended to complement practical subjects for the study of optical communications students in a friendly and intuitive environment.

Secure transmission of information by digital chaotic signals

Protecting signals is one of the main tasks in information transmission. A large number of different methods have been employed since many centuries ago. Most of them have been based on the use of certain signal added to the original one. When the composed signal is received, if the added signal is known, the initial information may be obtained. The main problem is the type of masking signal employed. One possibility is the use of chaotic signals, but they have a first strong limitation: the need to synchronize emitter and receiver. Optical communications systems, based on chaotic signals, have been proposed in a large number of papers. Moreover, because most of the communication systems are digital and conventional chaos generators are analogue, a conversion analogue-digital is needed. In this paper we will report a new system where the digital chaos is obtained from an optically programmable logic structure. This structure has been employed by the authors in optical computing and some previous results in chaotic signals have been reported. The main advantage of this new system is that an analogue-digital conversion is not needed. Previous works by the authors employed Self-Electrooptical Effect Devices but in this case more conventional structures, as semiconductor laser amplifiers, have been employed. The way to analyze the characteristics of digital chaotic signals will be reported as well as the method to synchronize the chaos generators located in the emitter and in the receiver.

Expectations from EMET and OESEE ground listening of possible EM events generated by the TSS 1R

On 22nd February '96, the space mission STS 75 started ,from the NASA facilities at Cape Canaveral. Such a mission consists in the launch of the shuttle Columbia in order to carry out two experiments in the space: the TSS 1R (Tethered Satellite Sistem 1 Refliight) and the USMP (United States Microgravity Payload). The TSS 1R is a replica of a similar mission TSS 1 '92. The TSS space programme is a bilateral scientific cooperation between the USA space agency NASA (National Aeronautics and Space Agency) and the ASI (Italian Space Agency. The TSS 1R system consists on the shuttle Columbia which deploys, up-ward, by means a conducting tether 20 km long, a spherical satellite (1.5 mt diameter) containing scientific instrumentation. This system, orbiting at about 300 km from the Earth's surface, represents, presently, the largest experimental space structure, Due to its dimensions, flexibility and conducting properties of the tether, the system interacts, in a quite complex manner, wih the earth magnetic field and the ionospheric plasma, in a way that the total system behaves as an electromagnetic radiating antenna as well as an electric power generator. Twelve scientific experiments have been assessed by US and Italian scientists in order to study the electro dynamic behaviour of the structure orbiting in the ionos phere. Two experiments have been prepared in the attempt to receive on the Earth's surface possible electromagnetic events radiated by the TSS 1R. The project EMET (Electro Magnetic Emissions from Tether),USA and the project OESEE (Observations on the Earth Surface of Electromagnetic Emissions) Italy, consist in a coordinated programme of passive detection of such possible EM emissions. This detection will supply the verification of some thoretical hypotheses on the electrodynamic interactions between the orbiting system, the Earth's magnetic field and the ionospheric plasma with two principal aims as the technological assesment of the system concept as well as a deeper knowledge of the ionosphere properties for future space applications. A theoretical model that keeps the peculiarities of tether emissionsis being developed for signal prediction at constant tether current. As a step previous to the calculation of the expected ground signal , the Alfven-wave signature left by the tether far back in the ionosphere has been determined. The scientific expectations from the combined effort to measure the entity of those perturbations will be outlined taking in to account the used ground track sensor systems.

Photonic switching architectures with logic cells

Possible switching architectures, with Optically Programmable Logic Cells - OPLCs - will be reported in this paper. These basic units, previously employed by us for some other applications mainly in optical computing, will be employed as main elements to switch optical communications signals. The main aspect to be considered is that because the nternal components of these cells have nonlinear behaviors, namely either pure bistable or SEED-like properties, several are the possibilities to be obtained. Moreover, because their properties are dependent, under certain condition, of the signal wavelength, they are apt to be employed in WDM systems and the final result will depend on the orresponding optical signal frequency. We will give special emphasis to the case where self-routing is achieved, namely to structures of the Batcher or Banyan type. In these cases, as it will be shown, there is the possibility to route any packet input to a certain direction according to its first bits. The number of possible outputs gives the number of bits needed to route signals. An advantage of this configuration is that a very versatile behavior may be allowed. The main one is the possibility to obtain configurations with different kinds of behavior, namely, Strictly Nonblocking, Wide-Sense Nonblocking or Rearrangeably Nonblocking as well as to eliminate switching conflicts at a certain intermediate stages.

A generalized method for flat plates impact detection and location

In the last years, many analyses from acoustic signal processing have been used for different applications. In most cases, these sensor systems are based on the determination of times of flight for signals from every transducer. This paper presents a flat plate generalization method for impact detection and location over linear links or bars-based structures. The use of three piezoelectric sensors allow to achieve the position and impact time while the use of additional sensors lets cover a larger area of detection and avoid wrong timing difference measurements. An experimental setup and some experimental results are briefly presented.

Mach-Zehnder interferometer based on all-fiber multimode interference device for DPSK signal demodulation

Differential Phase Shift Keying (DPSK) modulation format has been shown as a robust solution for next-generation optical transmission systems. One key device enabling such systems is the delay interferometer, converting the signal phase information into intensity modulation to be detected by the photodiodes. Usually, Mach-Zehnder interferometer (MZI) is used for demodulating DPSK signals. In this paper, we developed an MZI which is based on all-fiber Multimode Interference (MI) structure: a multimode fiber (MMF) located between two single-mode fibers (SMF) without any transition zones. The standard MZI is not very stable since the two beams go through two different paths before they recombine. In our design the two arms of the MZI are in the same fiber, which will make it less temperature-sensitive than the standard MZI. Performance of such MZI will be analyzed from transmission spectrum. Finally such all-fiber MI-based MZI (MI-MZI) is used to demodulate 10 Gbps DPSK signals. The demodulated signals are analyzed from eye diagram and bit error rate (BER).

Personalisation of intelligent homecare services adapted to children with motor impairments

Ambient Intelligence could support innovative application domains like motor impairments' detection at the home environment. This research aims to prevent neurodevelopmental disorders through the natural interaction of the children with embedded intelligence daily life objects, like home furniture and toys. Designed system uses an interoperable platform to provide two intelligent interrelated home healthcare services: monitoring of children¿s abilities and completion of early stimulation activities. A set of sensors, which are embedded within the rooms, toys and furniture, allows private data gathering about the child's interaction with the environment. This information feeds a reasoning subsystem, which encloses an ontology of neurodevelopment items, and adapts the service to the age and acquisition of expected abilities. Next, the platform proposes customized stimulation services by taking advantage of the existing facilities at the child's environment. The result integrates Embedded Sensor Systems for Health at Mälardalen University with UPM Smart Home, for adapted services delivery.

DPSK signals demodulation based on a multimode fiber with a central dip

Differential Phase Shift Keying (DPSK) modulation format has been shown as a robust solution for next-generation optical transmission systems. One key device enabling such systems is a delay interferometer, converting the phase modulation signal into the intensity modulation signal to be detected by the photodiodes. Usually, a standard Mach-Zehnder interferometer (MZI) is used for demodulating a DPSK signal. In this paper, we develop an MZI which is based on all-fiber Multimode Interference (MI) structure: a multimode fiber (MMF) with a central dip, located between two single-mode fibers (SMFs) without any transition zones. The MI based MZI (MI-MZI) is more stable than the standard MZI as the two arms share the same MMF, reducing the impact of the external effects, such as temperature and others. Performance of this MI-MZI is analyzed theoretically and experimentally from transmission spectrum. Experimental results shows that high interference extinction ratio is obtained, which is far higher than that obtained from a normal graded-index based MI-MZI. Finally, by software simulation, we demonstrate that our proposed MI-MZI can be used for demodulating a 40 Gbps DPSK signal. The performance of the MI-MZI based DPSK receiver is analyzed from the sensitivity. Simulation results show that sensitivity of the proposed receiver is about -22.3 dBm for a BER of 10-15 and about -23.8 dBm for a BER of 10-9.