Spatial analysis of geometric design consistency and road sight distance

Because of the high number of crashes occurring on highways, it is necessary to intensify the search for new tools that help in understanding their causes. This research explores the use of a geographic information system (GIS) for an integrated analysis, taking into account two accident-related factors: design consistency (DC) (based on vehicle speed) and available sight distance (ASD) (based on visibility). Both factors require specific GIS software add-ins, which are explained. Digital terrain models (DTMs), vehicle paths, road centerlines, a speed prediction model, and crash data are integrated in the GIS. The usefulness of this approach has been assessed through a study of more than 500 crashes. From a regularly spaced grid, the terrain (bare ground) has been modeled through a triangulated irregular network (TIN). The length of the roads analyzed is greater than 100 km. Results have shown that DC and ASD could be related to crashes in approximately 4% of cases. In order to illustrate the potential of GIS, two crashes are fully analyzed: a car rollover after running off road on the right side and a rear-end collision of two moving vehicles. Although this procedure uses two software add-ins that are available only for ArcGIS, the study gives a practical demonstration of the suitability of GIS for conducting integrated studies of road safety.

Comparison and Assessment of Two Emission inventories for the Madrid Region

Emission inventories are databases that aim to describe the polluting activities that occur across a certain geographic domain. According to the spatial scale, the availability of information will vary as well as the applied assumptions, which will strongly influence its quality, accuracy and representativeness. This study compared and contrasted two emission inventories describing the Greater Madrid Region (GMR) under an air quality simulation approach. The chosen inventories were the National Emissions Inventory (NEI) and the Regional Emissions Inventory of the Greater Madrid Region (REI). Both of them were used to feed air quality simulations with the CMAQ modelling system, and the results were compared with observations from the air quality monitoring network in the modelled domain. Through the application of statistical tools, the analysis of emissions at cell level and cell – expansion procedures, it was observed that the National Inventory showed better results for describing on – road traffic activities and agriculture, SNAP07 and SNAP10. The accurate description of activities, the good characterization of the vehicle fleet and the correct use of traffic emission factors were the main causes of such a good correlation. On the other hand, the Regional Inventory showed better descriptions for non – industrial combustion (SNAP02) and industrial activities (SNAP03). It incorporated realistic emission factors, a reasonable fuel mix and it drew upon local information sources to describe these activities, while NEI relied on surrogation and national datasets which leaded to a poorer representation. Off – road transportation (SNAP08) was similarly described by both inventories, while the rest of the SNAP activities showed a marginal contribution to the overall emissions.

Sistema de telemetría para un vehículo de fórmula S.A.E.

En este proyecto, se ha desarrollado una aplicación electrónica para un coche de competición, en concreto para la fórmula SAE (Society of Automotive Engineers), una competición universitaria en la que cada equipo, formado por estudiantes, debe diseñar, construir y probar un prototipo basándose en una serie de reglas. El objetivo final de la competición es proporcionar a los estudiantes el conocimiento práctico necesario para su futura labor profesional, del cual se pensaba que los estudiantes adolecían al acabar sus estudios universitarios cuando se creó esta competición. La aplicación desarrollada en este proyecto consiste en un sistema de telemetría, utilizado para transmitir los datos proporcionados por los sensores del vehículo a través de un sistema de radiofrecuencia, de manera que se pueda estudiar el comportamiento del coche durante los ensayos a la vez que el coche está rodando y así no depender de un sistema de adquisición de datos del que había que descargarse la información una vez finalizada la sesión de ensayo, como había que hacer hasta el momento. Para la implementación del proyecto, se ha utilizado un kit de desarrollo (Xbee Pro 868) que incluye dos módulos de radio, dos placas de desarrollo, dos cables USB y una antena, el cual ha permitido desarrollar la parte de radio del proyecto. Para transmitir los datos proporcionados por la centralita del vehículo, la cual recoge la información de todos los sensores presentes en el vehículo, se han desarrollado dos placas de circuito impreso. La primera de ellas tiene como elemento principal un microprocesador PIC de la marca Microchip (PIC24HJ64GP502), que recoge los datos proporcionados por la centralita del vehículo a través de su bus CAN de comunicaciones. La segunda placa de circuito impreso tiene como elemento fundamental el transmisor de radio. Dicho transmisor está conectado al microprocesador de la otra placa a través de línea serie. Como receptor de radio se ha utilizado una de las placas de prueba que integraba el kit de desarrollo Xbee Pro 868, la cual recoge los datos que han sido enviados vía radio y los manda a su vez a través de USB a un ordenador donde son monitorizados. Hasta aquí la parte hardware del sistema. En cuanto a la parte software, ha habido que desarrollar una aplicación en lenguaje C, que ejecuta el microprocesador PIC, que se encarga de recoger los datos enviados por la centralita a través del bus CAN (Controller Area Network) y transmitirlos a través de línea serie al chip de radio. Por último, para la monitorización de los datos se han desarrollado dos aplicaciones en LabVIEW, una que recoge los datos a través de USB, los muestra en pantalla y los guarda en un fichero y otra que lee los datos del fichero y los representa gráficamente para permitir un estudio más detallado del comportamiento del vehículo. ABSTRACT In this project, an electronic application has been developed for a race car – Formula SAE car-. Formula SAE is a university championship in which each team, made up of students, should design, construct and test a prototype within certain rules. The final goal of the competition is to enhance the practical knowledge of the students, which was thougth to be poor at the time the competition was created. The application developed in this project consists of a telemetry system, employed to transmit the data provided by the car’s sensors through a radio frequency system, so that it could be possible to study the behaviour of the vehicle during tests and do not depend on a datalogger system as it occurred until now. To carry out the radio module of the project, a Xbee Pro 868 development kit has been used, which includes two radio modules, two development boards, two USB cables and an antenna. To transmit the data provided by the ECU (Engine Control Unit) of the vehicle, which receives information from all the sensors the vehicle has, two printed circuit boards have been built. One of them has a PIC microprocessor of Microchip (PIC24HJ64GP502) which receives the data coming from CAN bus of the ECU. Tha main element of the other printed circuit board is the radio transmitter. This chip receives the data from the microprocessor through its serial line. The development board of the Xbee Pro 868 has been used as receiver. When data arrives to the receiver, it transmits them to a computer through USB where the data are displayed. All this composes the hardware of the system. Regarding the software, a C coded application has been developed. This application is executed by the microprocessor and its function is to receive the data from the bus CAN (Controller Area Network) and send them to the radio transmitter through the microprocessor’s serial line. To show the data on the computer, two LabVIEW applications has been developed. The first one receives the data through the USB port, displays them on the screen and save them to a file and the second one reads the data from the file while represents them graphically to allow studying the behaviour of the car on track.

Emisiones y eficiencia energética: experiencias en el ámbito de la Ingeniería Rural

El LPF_TAGRALIA es un grupo de investigación reconocido de la UPM que trabaja en diversos ámbitos de la Ingeniería Agroforestal y de Biosistemas, entre los que se encuentra el análisis de emisiones de vehículos agrícolas, y el análisis de la calidad y la eficiencia energética en el transporte a larga distancia de productos perecederos, colaborando asimismo con una variedad de grupos y centros de investigación nacionales e internacionales. El primero de estos temas: análisis de emisiones de vehículos agrícolas, es objeto de estudio en el LPF_TAGRALIA desde hace aproximadamente diez años, cuando se materializa y cobra relevancia la aplicación del standard TIER de la agencia de protección ambiental americana (EPA) cuyo disparo de salida tuvo lugar en 1996 con la publicación del TIER I. La adopción en USA y Europa de este standard que regula las emisiones de CO, óxidos de Nitrógeno y 2 partículas de materia de diversa naturaleza (PM) se está produciendo de manera paulatina en función de la potencia de matriculación de los tractores (vehículos de fuera de carretera, off-road vehicles). En la actualidad el standard TIER IV ha de ser verificado mayoritariamente por los tractores, para lo cuál existen dos estrategias básicas: la recirculación de gases de escape (EGR), y la reducción catalítica selectiva (SCR). La verificación del funcionamiento en campo de estas estrategias ha sido materia de análisis y discusión por parte del LPF_TAGRALIA que ejerce desde hace 4 años la labor de Responsable de Ensayos de Campo para el suplemento Maq-Vida Rural, una de las publicaciones más reconocidas por los técnicos que desarrollan su labor en el ámbito de la Ingeniería Rural; los diversos documentos relacionados pueden consultarse en el servicio de acceso abierto también denominado Archivo Digital de la UPM (http://oa.upm.es/).

Pantalla táctil para el piloto en un monoplaza de la fórmula SAE

En este proyecto se ha desarrollado un sistema electrónico para un vehículo de Fórmula SAE. La Fórmula SAE es una competición orientada a estudiantes que se basa en el diseño y fabricación de un vehículo de carreras. Este vehículo será posteriormente testeado en una competición a nivel mundial. El principal objetivo de este proyecto es el estudio, diseño y creación de un sistema para la visualización de información en un vehículo a través de una pantalla táctil. El núcleo del sistema será un microcontrolador de 32 bits de Microchip programado en C sobre un sistema de desarrollo integrado. El sistema mostrará información que pueda ser de utilidad para el piloto del coche. La información que se mostrará en la pantalla provendrá de los diferentes sensores del propio vehículo (velocidad, rpm, temperatura, estado de la batería). Dichos sensores se comunicarán con el sistema a través de comunicación CAN Bus. Para el testeo del sistema se utilizará una herramienta de simulación CAN. Además de mostrar información, el piloto será capaz de seleccionar entre diferentes configuraciones para la conducción desde el propio volante. El sistema contiene además los elementos necesarios para la programación y depuración del microcontrolador PIC. ABSTRACT. In this project, an electronic application for a Formula SAE vehicle has been developed. The Formula SAE is a student-oriented competition based on the design and manufacture of a race car. This car will be later tested in a worldwide competition. The principal aim of this project is the study, design and manufacture of a system for the display of a vehicle’s information through a touch screen. The system core will be a 32-bit Microchip microcontroller programmed in C code over an Integrated Development Environment. The system will display useful information to the car driver. The information shown on the screen will come from the different sensors of the vehicle itself (speed, rpm, temperature, battery status). Those sensors will communicate with the system via CAN Bus. A CAN Bus simulator device will be used during the design testing. In addition to displaying information, the pilot will be able to select different driving configurations from the steering wheel itself. The system also contains the necessary elements for programming and debugging the PIC microcontroller.

Energy consumption and carbon dioxide emissions in rail and road freight transport in Spain: a case study of car carriers and bulk petrochemicals

This article provides a new methodology for estimating fuel consumption and emissions by enabling a correct comparison between freight transportation modes. The approach is developed and integrated as a part of an intelligent transportation system dealing with goods movement. A key issue is related to energy consumption ratios and consequent CO2 emissions. Energy consumption ratios are often used based on transport demand. However, including other ratios based on transport supply can be useful. Furthermore, it is important to indicate which factors are associated with variations in energy consumption and emissions; especially of interest are parameters that have a higher incidence and order of magnitude, in order to fairly compare and understand the difference between transport modes and sub-modes. The study finds that the use of an energy consumption equation can improve the quality of the estimates. The study proposes that coefficients that define the energy consumption equation should be tested to determine market niches and sources of improvement in energy consumption according to the category of vehicles, fuel types used, and classes of products transported.

A Visual AGV-Urban Car using Fuzzy Control

The goal of the work described in this paper is to develop a visual line guided system for being used on-board an Autonomous Guided Vehicle (AGV) commercial car, controlling the steering and using just the visual information of a line painted below the car. In order to implement the control of the vehicle, a Fuzzy Logic controller has been implemented, that has to be robust against curvature changes and velocity changes. The only input information for the controller is the visual distance from the image center captured by a camera pointing downwards to the guiding line on the road, at a commercial frequency of 30Hz. The good performance of the controller has successfully been demonstrated in a real environment at urban velocities. The presented results demonstrate the capability of the Fuzzy controller to follow a circuit in urban environments without previous information about the path or any other information from additional sensors

Improving the analysis of road pricing acceptability surveys by using hybrid models

Several international studies have analyzed the acceptability of road pricing schemes by means of an attitude survey in combination with the results of a stated choice experiment using both a descriptive analysis and a discrete-choice model with binary choice (?accept? or ?not accept? the toll). However, the use of hybrid discrete choice models constitutes an innovative alternative for integrating subjective attitudes and perceptions deriving from the survey of attitudes with the more objective variables from the stated choice experiment. This paper analyzes the results of applying these models to measure the acceptability of interurban road pricing among different groups of stakeholders (road freight and passenger operators, highway concessionaires, and associations of private car users) with qualitatively significant opinions on road pricing measures. Our results show that hybrid models are better suited to explaining the acceptability of a road pricing scheme by different groups of stakeholders than a separate analysis of the survey of attitudes and a discrete-choice model applied on a stated choice experiment. A particular finding was that the strong psycho-social latent variable of the perception of fairness explains the rejection or acceptance of a toll scheme by road stakeholders.

Floating car data augmentation based on infrastructure sensors and neural networks

The development of new-generation intelligent vehicle technologies will lead to a better level of road safety and CO2 emission reductions. However, the weak point of all these systems is their need for comprehensive and reliable data. For traffic data acquisition, two sources are currently available: 1) infrastructure sensors and 2) floating vehicles. The former consists of a set of fixed point detectors installed in the roads, and the latter consists of the use of mobile probe vehicles as mobile sensors. However, both systems still have some deficiencies. The infrastructure sensors retrieve information fromstatic points of the road, which are spaced, in some cases, kilometers apart. This means that the picture of the actual traffic situation is not a real one. This deficiency is corrected by floating cars, which retrieve dynamic information on the traffic situation. Unfortunately, the number of floating data vehicles currently available is too small and insufficient to give a complete picture of the road traffic. In this paper, we present a floating car data (FCD) augmentation system that combines information fromfloating data vehicles and infrastructure sensors, and that, by using neural networks, is capable of incrementing the amount of FCD with virtual information. This system has been implemented and tested on actual roads, and the results show little difference between the data supplied by the floating vehicles and the virtual vehicles.

Variable Speed Limits. Review and development of an aggregate indicator based on floating car data.

Changing factors (mainly traffic intensity and weather conditions) affecting road conditions require a suitable optimal speed at any time. To solve this problem, variable speed limit systems (VSL) ? as opposed to fixed limits ? have been developed in recent decades. This term has included a number of speed management systems, most notably dynamic speed limits (DSL). In order to avoid the indiscriminate use of both terms in the literature, this paper proposes a simple classification and offers a review of some experiences, how their effects are evaluated and their results This study also presents a key indicator, which measures the speed homogeneity and a methodology to obtain the data based on floating cars and GPS technology applying it to a case study on a section of the M30 urban motorway in Madrid (Spain).

How lowering speed limits in an urban highway affects traffics performance and emissions: the case of Madrid M-30 ring-road

The city of Madrid keeps not meeting the GHG and air pollutant limits set by the European legislation. A broad range of strategies have being taken into account to reduce both types of emissions; however traffic management meas ures are usually consigned to the sidelines. In 2004, Madrid City Council launched a plan to re-design its inner ring-road supported by a socioeconomic study that evaluated the environmental and operational benefits of the project. For safety reasons the planned speed limit for the tunnel section was finally reduced from 90km/h to 70km/h. Using a Macroscopic Traffic Model and the European Air Pollutant and Emissions Inventory Guidebook (EMEP/EEA), this paper examines the environmental and traffic performance consequences of this decision. Results support the thesis that reduced speed limits leads to GHG and air pollution reductions in the area affected by the measure without substantially altering traffic performance. The implementation of the new speed limit policy brings about a 15% and 16% reduction in both CO2 and NOx emissions respectively. Emissions’ reduction during off-peak hours is larger than during peak hours.

Using floating car data to analyse the effects of ITS measures and eco-driving

The road transportation sector is responsible for around 25% of total man-made CO2 emissions worldwide. Considerable efforts are therefore underway to reduce these emissions using several approaches, including improved vehicle technologies, traffic management and changing driving behaviour. Detailed traffic and emissions models are used extensively to assess the potential effects of these measures. However, if the input and calibration data are not sufficiently detailed there is an inherent risk that the results may be inaccurate. This article presents the use of Floating Car Data to derive useful speed and acceleration values in the process of traffic model calibration as a means of ensuring more accurate results when simulating the effects of particular measures. The data acquired includes instantaneous GPS coordinates to track and select the itineraries, and speed and engine performance extracted directly from the on-board diagnostics system. Once the data is processed, the variations in several calibration parameters can be analyzed by comparing the base case model with the measure application scenarios. Depending on the measure, the results show changes of up to 6.4% in maximum speed values, and reductions of nearly 15% in acceleration and braking levels, especially when eco-driving is applied.

La Ordenación del Territorio en las Ciudades Globales Europeas: El caso de Madrid

En la Comunidad de Madrid el modelo de ocupación del territorio en las dos últimas décadas ha obedecido a factores de oferta del mercado y no a las necesidades de la población, ello provoca un consumo de suelo y de recursos que conducen a una sobrexplotación insostenible. Las metrópolis globales están experimentando rápidas e intensas transformaciones, basadas en los paradigmas emergentes de la globalización, la gobernanza, la metropolizacion y la dispersión de las actividades en el territorio y a través de ellos se abordan los planes de Londres, París y las tentativas de Madrid. La globalización provoca la pérdida de soberanía de las administraciones publicas y la competitividad entre las ciudades globales en Europa, Londres, Paris y Madrid, son centros de poder, de concentración y crecimiento donde se produce la dualización del espacio y donde la desigualdad participa de la restructuración urbana, concentración de pobreza frente a espacios de la nueva clase emergente en donde dominan los sectores de servicios y las tecnologías de la información. Frente al desarrollo urbano neoliberal de regulación a través del mercado y basada en criterios de eficiencia de la Nueva Gestión Pública, se vislumbra la posibilidad de que la sociedad se administre a si misma por medio de acciones voluntarias y responsables que promuevan los intereses colectivos mediante el reconocimiento de su propia identidad, introduciendo el concepto de gobernanza. Frente, a la explotación del territorio por parte de la sociedad extractiva que genera corrupcion, se propone un modelo de cooperación público-privada basado en la confianza mutua, un marco regulador estable, la transparencia y la información a cuyo flujo más homogéneo contribuirán sin duda las TICs. En todo este proceso, las regiones metropolitanas en Europa se erigen como motores del crecimiento, donde los límites administrativos son superados, en un territorio cada vez más extendido y donde los gobiernos locales tienen que organizarse mediante un proceso de cooperación en la provisión de servicios que ayuden a evitar los desequilibrios territoriales. El fenómeno de la dispersión urbana en desarrollos de baja densidad, los centros comerciales periféricos, la expulsión hacia la periferia de las actividades de menor valor añadido y la concentración de funciones directivas en el centro, conducen a una fragmentación del territorio en islas dependientes del automóvil y a procesos de exclusión social por la huida de las rentas altas y la expulsión de las rentas bajas de los centros urbanos. Se crean fragmentos monofuncionales y discontinuos, apoyados en las autovías, lugares carentes de identidad y generadores de despilfarro de recursos y una falta de sostenibilidad ambiental, económica y social. El estudio de la cultura de la planificación en Europa ayuda a comprender los diferentes enfoques en la ordenación del territorio y el proceso de convergencia entre las diferentes regiones. Los documentos de la UE se basan en la necesidad de la competitividad para el crecimiento europeo y la cohesión social y en relación al territorio en los desarrollos policéntricos, la resolución del dualismo campo-ciudad, el acceso equilibrado a las infraestructuras, la gestión prudente de la naturaleza, el patrimonio y el fomento de la identidad. Se proponen dos niveles de estudio uno actual, los últimos planes de Londres y Paris y el otro la evolución de las tentativas de planes en la Región madrileña siempre en relación a los paradigmas emergentes señalados y su reflejo en los documentos. El Plan de Londres es estratégico, con una visión a largo plazo, donde se confiere un gran interés al proceso, al papel del alcalde como líder y su adaptación a las circunstancias cambiantes, sujeto a las incertidumbres de una ciudad global. El desarrollo del mismo se concibe a través de la colaboración y cooperación entre las administraciones y actores. La estructura del documento es flexible, establece orientaciones y guías indicativas, para la redacción de los planes locales, no siendo las mismas vinculantes y con escasa representación grafica. El Plan de París es más un plan físico, similar al de otros centros europeos, trabaja sobre los sectores y sobre los territorios, con información extensa, con características de “Plan Latino” por la fuerza de la expresión gráfica, pero al mismo tiempo contiene una visión estratégica. Es vinculante en sus determinaciones y normativas, se plantea fomentar, pero también prohibir. Ambos planes tratan la competitividad internacional de sus centros urbanos, la igualdad social, la inclusión de todos los grupos sociales y la vivienda como una cuestión de dignidad humana. Londres plantea la gobernanza como cooperación entre sector público-privado y la necesaria cooperación con las regiones limítrofes, en París las relaciones están más institucionalizadas resaltando la colaboración vertical entre administraciones. Ambos plantean la densificación de nodos servidos por transporte público, modos blandos y el uso los TODs y la preservación de la infraestructura verde jerarquizada, la potenciación de la red azul y la mejora del paisaje de las periferias. En las “tentativas” de planes territoriales de Madrid se constata que estuvieron sujetas a los ciclos económicos. El primer Documento las DOT del año 1984, no planteaba crecimiento, ni económico ni demográfico, a medio plazo y por ello no proponía una modificación del modelo radio concéntrico. Se trataba de un Plan rígido volcado en la recuperación del medio rural, de la ciudad, el dimensionamiento de los crecimientos en función de las dotaciones e infraestructuras existentes. Aboga por la intervención de la administración pública y la promoción del pequeño comercio. Destaca el desequilibrio social en función de la renta, la marginación de determinados grupos sociales, el desequilibrio residencia/empleo y la excesiva densidad. Incide en la necesidad de viviendas para los más desfavorecidos mediante el alquiler, la promoción suelo público y la promoción del ferrocarril para dar accesibilidad al espacio central. Aboga por el equipamiento de proximidad y de pequeño tamaño, el tratamiento paisajístico de los límites urbanos de los núcleos y el control de las actividades ilegales señalando orientaciones para el planeamiento urbano. Las Estrategias (1989) contienen una visión: la modificación del modelo territorial, mediante la intervención pública a través de proyectos. Plantea la reestructuración económica del territorio, la reconversión del aparato productivo, la deslocalización de actividades de escaso valor añadido y una mayor ubicuidad de la actividad económica. Incide en la difusión de la centralidad hacia el territorio del sur, equilibrándolo con el norte, tratando de recomponer empleo y residencia, integrando al desarrollo económico las periferias entre sí y con el centro. Las actuaciones de transporte consolidarían las actuaciones, modificando el modelo radio concéntrico facilitando la movilidad mediante la red de cercanías y la intermodalidad. El plan se basaba en el liderazgo del Consejero, no integrando sectores como el medio ambiente, ni estableciendo un documento de seguimiento de las actuaciones que evaluara los efectos de las políticas y su aportación al equilibrio territorial, a través de los proyectos realizados. El Documento Preparatorio de las Bases (1995), es más de un compendio o plan de planes, recoge análisis y propuestas de los documentos anteriores y de planes sectoriales de otros departamentos. Presenta una doble estructura: un plan físico integrador clásico, que abarca los sectores y territorios, y recoge las Estrategias previas añadiendo puntos fuertes, como el malestar urbano y la rehabilitación el centro. Plantea la consecución del equilibrio ambiental mediante el crecimiento de las ciudades existentes, la vertebración territorial basada en la movilidad y en la potenciación de nuevas centralidades, la mejora de la habitabilidad y rehabilitación integral del Centro Urbano de Madrid, y la modernización del tejido productivo existente. No existe una idea-fuerza que aglutine todo el documento, parte del reconocimiento de un modelo existente concentrado y congestivo, un centro urbano dual y dos periferias al este y sur con un declive urbano y obsolescencia productiva y al oeste y norte con una dispersión que amenaza al equilibrio medioambiental. Señala como aspectos relevantes, la creciente polarización y segregación social, la deslocalización industrial, la aparición de las actividades de servicios a las empresas instaladas en las áreas metropolitanas, y la dispersión de las actividades económicas en el territorio por la banalización del uso del automóvil. Se plantea el reto de hacer ciudad de la extensión suburbana y su conexión con el sistema metropolitano, mediante una red de ciudades integrada y complementaria, en búsqueda de un mayor equilibrio y solidaridad territorial. Las Bases del PRET (1997) tenían como propósito iniciar el proceso de concertación en que debe basarse la elaboración del Plan. Parte de la ciudad mediterránea compacta, y diversa, y de la necesidad de que las actividades económicas, los servicios y la residencia estén en proximidad, resolviéndolo mediante una potente red de transporte público que permitiese una accesibilidad integrada al territorio. El flujo de residencia hacia la periferia, con un modelo ajeno de vivienda unifamiliar y la concentración del empleo en el centro producen desequilibrio territorial. Madrid manifiesta siempre apostó por la densificación del espacio central urbanizado, produciendo su congestión, frente al desarrollo de nuevos suelos que permitieran su expansión territorial. Precisa que es necesario preservar los valores de centralidad de Madrid, como generador de riqueza, canalizando toda aquella demanda de centralidad, hacia espacios más periféricos. El problema de la vivienda no lo ve solo como social, sino como económico, debido a la pérdida de empleos que supone su paralización. Observa ya los crecimientos residenciales en el borde de la region por el menor valor del suelo. Plantea como la política de oferta ha dado lugar a un modelo de crecimiento fragmentado, desequilibrado, desestructurado, con fuertes déficits dotacionales y de equipamiento, que inciden en la segregación espacial de las rentas, agravando el proceso de falta de identidad morfológica y de desarraigo de los valores urbanos. El plan señalaba que la presión sobre el territorio creaba su densificación por las limitaciones de espacio, Incidía en limitar el peso de la intervención pública, no planteando propuestas de cooperación público-privado. La mayor incoherencia estriba en que los objetivos eran innovadores y coinciden en su mayoría con las propuestas estudiadas de Londres o Paris, pero se intentan implementar a través de un cambio hacia un modelo reticulado homogéneo, expansivo sobre el territorio, que supone un consumo de suelo y de infraestructuras para solucionar un problema inexistente, la gestión de la densidad. Durante las dos últimas décadas en ausencia de un plan regional, la postura neoliberal fue la de un exclusivo control de legalidad del planeamiento, los municipios entraron en un proceso de competencia para aprovechar las iniciales ventajas económicas de los crecimientos detectados, que proporcionaban una base económica “sólida” a unos municipios con escasos recursos en sus presupuestos municipales. La legislación se modifica a requerimiento de grupos interesados, no existiendo un marco estable. Se pierde la figura del plan no solo a nivel regional, si no en los sectores y el planeamiento municipal donde los municipios tiende a basarse en modificaciones puntuales con la subsiguiente pérdida del modelo urbanístico. La protección ambiental se estructura mediante un extenso nivel de figuras, con diversidad de competencias que impide su efectiva protección y control. Este proceso produce un despilfarro en la ocupación del suelo, apoyada en las infraestructuras viarias, y un crecimiento disperso y de baja densidad, cada vez más periférico, produciéndose una segmentación social por dualización del espacio en función de niveles de renta. Al amparo del boom inmobiliario, se produce una falta de política social de vivienda pública, más basada en la dinamización del mercado con producción de viviendas para rentas medias que en políticas de alquiler para determinados grupos concentrándose estas en los barrios desfavorecidos y en la periferia sur. Se produce un incremento de la vivienda unifamiliar, muchas veces amparada en políticas públicas, la misma se localiza en el oeste principalmente, en espacios de valor como el entorno del Guadarrama o con viviendas más baratas por la popularización de la tipología en la frontera de la Región. El territorio se especializa a modo de islas monofuncionales, las actividades financieras y de servicios avanzados a las empresas se localizan en el norte y oeste próximo, se pierde actividad industrial que se dispersa más al sur, muchas veces fuera de la región. Se incrementan los grandes centros comerciales colgados de las autovías y sin población en su entorno. Todo este proceso ha provocado una pérdida de utilización del transporte público y un aumento significativo del uso del vehículo privado. En la dos últimas décadas se ha producido en la región de Madrid desequilibrio territorial y segmentación social, falta de implicación de la sociedad en el territorio, dispersión del crecimiento y un incremento de los costes ambientales, sociales y económicos, situación, que solo, a través del uso racional del territorio se puede reconducir, apoyado en una planificación integrada sensible y participativa. ABSTRACT In Madrid the model of land occupation in the past two decades has been driven by market supply factors rather than the needs of the population. This results in a consumption of land and resources that leads to unsustainable overexploitation. Addressing this issue must be done through sensitive and participatory integrated planning. Global cities are experiencing rapid and intense change based on the emerging paradigms of globalization, governance, metropolization and the dispersion of activities in the territory. Through this context, a closer look will be taken at the London and Paris plans as well as the tentative plans of Madrid. Globalization causes the loss of state sovereignty and the competitiveness among global cities in Europe; London, Paris and Madrid. These are centres of power, concentration and growth where the duality of space is produced, and where inequality plays a part in urban restructuration. There are concentrated areas of poverty versus areas with a new emerging class where the services sector and information technologies are dominant. The introduction of ICTs contributes to a more homogeneous flow of information leading, us to the concept of governance. Against neoliberal urban development based on free market regulations and efficiency criteria as established by the “New Public Management”, emerge new ways where society administers itself through voluntary and responsible actions to promote collective interests by recognizing their own identity. A new model of public-private partnerships surfaces that is based on mutual trust, transparency, information and a stable regulatory framework in light of territorial exploitation by the “extractive society” that generates corruption. Throughout this process, European metropolitan regions become motors of growth where administrative boundaries are overcome in an ever expanding territory where government is organized through cooperative processes to provide services that protect against regional imbalances. Urban sprawl or low-density development as seen in peripheral shopping centres, the off-shoring of low added-value activities to the periphery, and the concentration of business and top management functions in the centre, leads to a fragmentation of the territory in automobile dependent islands and a process of social exclusion brought on by the disappearance of high incomes. Another effect is the elimination of low income populations from urban centres. In consequence, discontinuous expansions and mono-functional places that lack identity materialize supported by a highway network and high resource consumption. Studying the culture of urban planning in Europe provides better insight into different approaches to spatial planning and the process of convergence between different regions. EU documents are based on the need of competitiveness for European growth and social cohesion. In relation to polycentric development territory they are based on a necessity to solve the dualism between field and city, balanced access to infrastructures, prudent management of nature and solidifying heritage and identity Two levels of study unfold, the first being the current plans of London and Île-de-France and the second being the evolution of tentative plans for the Madrid region as related to emerging paradigms and how this is reflected in documents. The London Plan is strategic with a long-term vision that focuses on operation, the role of the mayor as a pivotal leader, and the adaptability to changing circumstances brought on by the uncertainties of a global city. Its development is conceived through collaboration and cooperation between governments and stakeholders. The document structure is flexible, providing guidance and indicative guidelines on how to draft local plans so they are not binding, and it contains scarce graphic representation. The Plan of Paris takes on a more physical form and is similar to plans of other European centres. It emphasizes sectors and territories, using extensive information, and is more characteristic of a “Latin Plan” as seen in its detailed graphic expression. However, it also contains a strategic vision. Binding in its determinations and policy, it proposes advancement but also prohibition. Both plans address the international competitiveness of urban centres, social equality, inclusion of all social groups and housing as issues of human dignity. London raises governance and cooperation between public and private sector and the need for cooperation with neighbouring regions. In Paris, the relations are more institutionalized highlighting vertical collaboration between administrations. Both propose nodes of densification served by public transportation, soft modes and the use of TOD, the preservation of a hierarchical green infrastructure, and enhancing the landscape in urban peripheries. The tentative territorial plans for the Madrid region provide evidence that they were subject to economic cycles. The first document of master guidelines (1984) does not address either economic or demographic growth in the mid term and therefore does not propose the modification of the radio-concentric model. It is a rigid plan focused on rural and urban recovery and the dimensioning of growth that depends on endowments and infrastructures. It advocates government intervention and promotes small business. The plan emphasizes social imbalance in terms of income, marginalization of certain social groups, the imbalance of residence/employment and excessive density. It stresses the need for social rent housing for the underprivileged, promotes public land, and the supports rail accessibility to the central area. It backs facilities of proximity and small size, enhancing the landscaping of city borders, controlling illegal activities and draws out guidelines for urban planning. The strategies (1989) contain a vision: Changing the territorial model through public intervention by means of projects. They bring to light economic restructuring of territory, the reconversion of the productive apparatus, relocation of low value-added activities, and greater ubiquity of economic activity. They also propose the diffusion of centrality towards southern territories, balancing it with the north in an attempt to reset employment and residence that integrates peripheral economic development both in the periphery and the centre. Transport would consolidate the project, changing the radius-concentric model and facilitating mobility through a commuter and inter-modality network. The plan derives itself from the leadership of the minister and does not integrate sectors such as environment. It also does not incorporate the existence of a written document that monitors performance to evaluate the effects of policies and their contribution to the territorial balance. The Preparatory Document of the Bases, (1995) is more a compendium, or plan of plans, that compiles analysis and proposals from previous documents and sectorial plans from other departments. It has a dual structure: An integrating physical plan covering the sectors and territories that includes the previous strategies while adding some strengths. One such point is the urban discomfort and the rehabilitation of the centre. It also poses the achievement of environmental balance through the growth of existing cities, the territorial linking based on mobility, strengthening new centres, improving the liveability and comprehensive rehabilitation of downtown Madrid, and the modernization of the existing production network. There is no one powerful idea that binds this document. This is due to the recognition of an existing concentrate and congestive model, a dual urban centre, two eastern and southern suburbs suffering from urban decay, and an obsolescent productive north and west whose dispersion threatens the environmental balance. Relevant aspects the document highlights are increasing polarization and social segregation, industrial relocation, the emergence of service activities to centralized companies in metropolitan areas and the dispersion of economic activities in the territory by the trivialization of car use. It proposes making the city from the suburban sprawl and its connection to the metropolitan system through a network of integrated and complementary cities in search of a better balance and territorial solidarity. The Bases of PRET (1997) aims to start the consultation process that must underpin the development of the plan. It stems from a compact and diverse Mediterranean city along with the need for economic activities, services and residences that are close. To resolve the issue, it presents a powerful network of public transport that allows integrated accessibility to the territory. The flow of residence to the periphery based on a foreign model of detached housing and an employment concentration in the centre produces territorial imbalance. Madrid always opted for the densification of the central space, producing its congestion, against the development of new land that would allow its territorial expansion. The document states that the necessity to preserve the values of the housing problem is not only viewed as social, but also economic due to the loss of jobs resulting from their paralysis. It notes the residential growth in the regional border due to the low price of land and argues that the policy of supply has led to a fragmented model of growth that is unbalanced, unstructured, with strong infrastructure and facility deficits that affect the spatial segregation of income and aggravate the lack of morphological identity, uprooting urban values. The pressure on the territory caused its densification due to space limitation; the proposed grid model causes land consumption and infrastructure to solve a non-problem, density. Focusing on limiting the weight of public intervention, it does not raise proposals for public-private cooperation. The biggest discrepancy is that the targets were innovative and mostly align with the proposals in London and Paris. However, it proposes to be implemented through a shift towards a uniform gridded model that is expansive over territory. During the last two decades, due to the absence of a regional plan, a neoliberal stance held exclusive control of the legality of urban planning. The municipalities entered a competition process to take advantage of initial economic benefits of such growth. This provided a “solid” economic base for some municipalities with limited resources in their municipal budgets. The law was amended without a legal stable framework at the request of stakeholders. The character of the plan is lost not only regionally, but also in the sectors and municipal planning. This tends to be based on specific changes with the loss of an urban model. Environmental protection is organized through an extensive number of protection figures with diverse competencies that prevent its effective protection. This process squanders the use of the land, backed by increasing road infrastructure, dispersed occupations with low-density growth causing a social segmentation due to space duality based on income levels. During the housing boom, there is a reduction in social public housing policy mostly due to a boost in the market of housing production for average incomes than in rental policies for needy social groups that focus on disadvantaged neighbourhoods and southern suburbs. As a result, there is an increase in single-family housing, often protected by public policy. This is located primarily in the west in areas of high environmental value such as Guadarrama. There is also cheaper housing due to the popularization of typology in the border region. There, territory works as a mono-functional islands. Financial activities and advanced services for companies are located to the north and west where industrial activity is lost as it migrates south, often outside the region. The number of large shopping centres hanging off the highway infrastructure with little to no surrounding population increases. This process leads to the loss of dependency on public transport and a significant increase in the use of private vehicles. The absence of regional planning has produced more imbalance, more social segmentation, more dispersed growth and a lot of environmental, social and economic costs that can only be redirected through rational territorial.