La invención de La Fonction Oblique

Un estudiante arquitecto disimula su espíritu burgués bajo una apariencia de vagabundo y enmascara su cinismo bajo la convención de la ironía. SIMULACRO Una joven arquitectura americana de California se revuelca complacida en el culto a la cabaña de madera y a la falsa granja de cubierta retorcida y pintoresca. Una arquitectura internacional politizada busca en el neorrealismo el sentido tan masoquista de la miseria del buen gusto y de la anécdota irrelevante para calmar su conciencia extraviada. Una arquitectura italiana de investigación se refugia en los más increíbles revivals de las épocas más alejadas; transformando alegremente la moda antigua en vieja decoración, influenciando al mundo y justificando su postura de anticuario con el intento vano de elevarla no solo al nivel de una tendencia más, sino al de escuela de arquitectura. SIMULACRO Una arquitectura tradicional cansada, que intenta su revitalización, disfrazándose bajo la etimología neodecorativa de “brutalismo”. Una arquitectura falaz que corrompe los lugares de placer con su exotismo y su folclore de bazar. Una arquitectura indiferente que esconde su falta de pasión bajo la coartada moderna del muro cortina y bajo la máscara de la técnica.

A gaze to rural education according to scientific discourses during the last decade

He largest proportion of illiteracy and lack of access to education in the world is concentrated in rural areas; therefore it is important to ensure there is access to quality education in these spots. This challenge is assumed by different branches of social research and it is reflected within the publication of articles in scientific journals. In the present document the scientific discourse surrounding the theme of rural education during the last decade was analyzed. To do this, the paper focuses on three aspects: the countries that set the agenda, the geographical areas that represent most of the attention and the prevalent themes within continents. It was observed that USA was the most productive country in terms of scientific writings with 30%; that Asia is really interested in health issues associated to rural education; that in Europe gender issues are on the table and that the African and Asian continents, as well as Latin America, are interested only on their own issues, as 100% of the times they only wrote about themselves.

A canonical UTD solution for electromagnetic scattering by an electrically large impedance circular cylinder illuminated by an obliquely incident plane wave

A uniform geometrical theory of diffraction (UTD) solution is developed for the canonical problem of the electromagnetic (EM) scattering by an electrically large circular cylinder with a uniform impedance boundary condition (IBC), when it is illuminated by an obliquely incident high frequency plane wave. A solution to this canonical problem is first constructed in terms of an exact formulation involving a radially propagating eigenfunction expansion. The latter is converted into a circumferentially propagating eigenfunction expansion suited for large cylinders, via the Watson transform, which is expressed as an integral that is subsequently evaluated asymptotically, for high frequencies, in a uniform manner. The resulting solution is then expressed in the desired UTD ray form. This solution is uniform in the sense that it has the important property that it remains continuous across the transition region on either side of the surface shadow boundary. Outside the shadow boundary transition region it recovers the purely ray optical incident and reflected ray fields on the deep lit side of the shadow boundary and to the modal surface diffracted ray fields on the deep shadow side. The scattered field is seen to have a cross-polarized component due to the coupling between the TEz and TMz waves (where z is the cylinder axis) resulting from the IBC. Such cross-polarization vanishes for normal incidence on the cylinder, and also in the deep lit region for oblique incidence where it properly reduces to the geometrical optics (GO) or ray optical solution. This UTD solution is shown to be very accurate by a numerical comparison with an exact reference solution.

Comparison of fractal dimensions based on segmented NDVI fields obtained from different remote sensors.

Satellite image data have become an important source of information for monitoring vegetation and mapping land cover at several scales. Beside this, the distribution and phenology of vegetation is largely associated with climate, terrain characteristics and human activity. Various vegetation indices have been developed for qualitative and quantitative assessment of vegetation using remote spectral measurements. In particular, sensors with spectral bands in the red (RED) and near-infrared (NIR) lend themselves well to vegetation monitoring and based on them [(NIR - RED) / (NIR + RED)] Normalized Difference Vegetation Index (NDVI) has been widespread used. Given that the characteristics of spectral bands in RED and NIR vary distinctly from sensor to sensor, NDVI values based on data from different instruments will not be directly comparable. The spatial resolution also varies significantly between sensors, as well as within a given scene in the case of wide-angle and oblique sensors. As a result, NDVI values will vary according to combinations of the heterogeneity and scale of terrestrial surfaces and pixel footprint sizes. Therefore, the question arises as to the impact of differences in spectral and spatial resolutions on vegetation indices like the NDVI. The aim of this study is to establish a comparison between two different sensors in their NDVI values at different spatial resolutions.

Seismic Risk Scenarios in Puerto Principe (Haiti). A Tool for Reconstruction and Emergency Planning

The 12 January 2010, an earthquake hit the city of Port-au-Prince, capital of Haiti. The earthquake reached a magnitude Mw 7.0 and the epicenter was located near the town of Léogâne, approximately 25 km west of the capital. The earthquake occurred in the boundary region separating the Caribbean plate and the North American plate. This plate boundary is dominated by left-lateral strike slip motion and compression, and accommodates about 20 mm/y slip, with the Caribbean plate moving eastward with respect to the North American plate (DeMets et al., 2000). Initially the location and focal mechanism of the earthquake seemed to involve straightforward accommodation of oblique relative motion between the Caribbean and North American plates along the Enriquillo-Plantain Garden fault system (EPGFZ), however Hayes et al., (2010) combined seismological observations, geologic field data and space geodetic measurements to show that, instead, the rupture process involved slip on multiple faults. Besides, the authors showed that remaining shallow shear strain will be released in future surface-rupturing earthquakes on the EPGFZ. In December 2010, a Spanish cooperation project financed by the Politechnical University of Madrid started with a clear objective: Evaluation of seismic hazard and risk in Haiti and its application to the seismic design, urban planning, emergency and resource management. One of the tasks of the project was devoted to vulnerability assessment of the current building stock and the estimation of seismic risk scenarios. The study was carried out by following the capacity spectrum method as implemented in the software SELENA (Molina et al., 2010). The method requires a detailed classification of the building stock in predominant building typologies (according to the materials in the structure and walls, number of stories and age of construction) and the use of the building (residential, commercial, etc.). Later, the knowledge of the soil characteristics of the city and the simulation of a scenario earthquake will provide the seismic risk scenarios (damaged buildings). The initial results of the study show that one of the highest sources of uncertainties comes from the difficulty of achieving a precise building typologies classification due to the craft construction without any regulations. Also it is observed that although the occurrence of big earthquakes usually helps to decrease the vulnerability of the cities due to the collapse of low quality buildings and the reconstruction of seismically designed buildings, in the case of Port-au-Prince the seismic risk in most of the districts remains high, showing very vulnerable areas. Therefore the local authorities have to drive their efforts towards the quality control of the new buildings, the reinforcement of the existing building stock, the establishment of seismic normatives and the development of emergency planning also through the education of the population.

Development of a Uniform Theory of Diffraction for Scattered and Surface Electromagnetic Field Analysis on a Cylinder

Con esta tesis ”Desarrollo de una Teoría Uniforme de la Difracción para el Análisis de los Campos Electromagnéticos Dispersados y Superficiales sobre un Cilindro” hemos iniciado una nueva línea de investigación que trata de responder a la siguiente pregunta: ¿cuál es la impedancia de superficie que describe una estructura de conductor eléctrico perfecto (PEC) convexa recubierta por un material no conductor? Este tipo de estudios tienen interés hoy en día porque ayudan a predecir el campo electromagnético incidente, radiado o que se propaga sobre estructuras metálicas y localmente convexas que se encuentran recubiertas de algún material dieléctrico, o sobre estructuras metálicas con pérdidas, como por ejemplo se necesita en determinadas aplicaciones aeroespaciales, marítimas o automovilísticas. Además, desde un punto de vista teórico, la caracterización de la impedancia de superficie de una estructura PEC recubierta o no por un dieléctrico es una generalización de varias soluciones que tratan ambos tipos de problemas por separado. En esta tesis se desarrolla una teoría uniforme de la difracción (UTD) para analizar el problema canónico del campo electromagnético dispersado y superficial en un cilindro circular eléctricamente grande con una condición de contorno de impedancia (IBC) para frecuencias altas. Construir una solución basada en UTD para este problema canónico es crucial en el desarrollo de un método UTD para el caso más general de una superficie arbitrariamente convexa, mediante el uso del principio de localización de los campos electromagnéticos a altas frecuencias. Esta tesis doctoral se ha llevado a cabo a través de una serie de hitos que se enumeran a continuación, enfatizando las contribuciones a las que ha dado lugar. Inicialmente se realiza una revisión en profundidad del estado del arte de los métodos asintóticos con numerosas referencias. As í, cualquier lector novel puede llegar a conocer la historia de la óptica geométrica (GO) y la teoría geométrica de la difracción (GTD), que dieron lugar al desarrollo de la UTD. Después, se investiga ampliamente la UTD y los trabajos más importantes que pueden encontrarse en la literatura. As í, este capítulo, nos coloca en la posición de afirmar que, hasta donde nosotros conocemos, nadie ha intentado antes llevar a cabo una investigación rigurosa sobre la caracterización de la impedancia de superficie de una estructura PEC recubierta por un material dieléctrico, utilizando para ello la UTD. Primero, se desarrolla una UTD para el problema canónico de la dispersión electromagnética de un cilindro circular eléctricamente grande con una IBC uniforme, cuando es iluminado por una onda plana con incidencia oblicua a frecuencias altas. La solución a este problema canónico se construye a partir de una solución exacta mediante una expansión de autofunciones de propagación radial. Entonces, ésta se convierte en una nueva expansión de autofunciones de propagación circunferencial muy apropiada para cilindros grandes, a través de la transformación de Watson. De esta forma, la expresión del campo se reduce a una integral que se evalúa asintóticamente, para altas frecuencias, de manera uniforme. El resultado se expresa según el trazado de rayos descrito en la UTD. La solución es uniforme porque tiene la importante propiedad de mantenerse continua a lo largo de la región de transición, a ambos lados de la superficie del contorno de sombra. Fuera de la región de transición la solución se reduce al campo incidente y reflejado puramente ópticos en la región iluminada del cilindro, y al campo superficial difractado en la región de sombra. Debido a la IBC el campo dispersado contiene una componente contrapolar a causa de un acoplamiento entre las ondas TEz y TMz (donde z es el eje del cilindro). Esta componente contrapolar desaparece cuando la incidencia es normal al cilindro, y también en la región iluminada cuando la incidencia es oblicua donde el campo se reduce a la solución de GO. La solución UTD presenta una muy buena exactitud cuando se compara numéricamente con una solución de referencia exacta. A continuación, se desarrolla una IBC efectiva para el cálculo del campo electromagnético dispersado en un cilindro circular PEC recubierto por un dieléctrico e iluminado por una onda plana incidiendo oblicuamente. Para ello se derivan dos impedancias de superficie en relación directa con las ondas creeping y de superficie TM y TE que se excitan en un cilindro recubierto por un material no conductor. Las impedancias de superficie TM y TE están acopladas cuando la incidencia es oblicua, y dependen de la geometría del problema y de los números de onda. Además, se ha derivado una impedancia de superficie constante, aunque con diferente valor cuando el observador se encuentra en la zona iluminada o en la zona de sombra. Después, se presenta una solución UTD para el cálculo de la dispersión de una onda plana con incidencia oblicua sobre un cilindro eléctricamente grande y convexo, mediante la generalización del problema canónico correspondiente al cilindro circular. La solución asintótica es uniforme porque se mantiene continua a lo largo de la región de transición, en las inmediaciones del contorno de sombra, y se reduce a la solución de rayos ópticos en la zona iluminada y a la contribución de las ondas de superficie dentro de la zona de sombra, lejos de la región de transición. Cuando se usa cualquier material no conductor se excita una componente contrapolar que tiende a desaparecer cuando la incidencia es normal al cilindro y en la región iluminada. Se discuten ampliamente las limitaciones de las fórmulas para la impedancia de superficie efectiva, y se compara la solución UTD con otras soluciones de referencia, donde se observa una muy buena concordancia. Y en tercer lugar, se presenta una aproximación para una impedancia de superficie efectiva para el cálculo de los campos superficiales en un cilindro circular conductor recubierto por un dieléctrico. Se discuten las principales diferencias que existen entre un cilindro PEC recubierto por un dieléctrico desde un punto de vista riguroso y un cilindro con una IBC. Mientras para un cilindro de impedancia se considera una impedancia de superficie constante o uniforme, para un cilindro conductor recubierto por un dieléctrico se derivan dos impedancias de superficie. Estas impedancias de superficie están asociadas a los modos de ondas creeping TM y TE excitadas en un cilindro, y dependen de la posición y de la orientación del observador y de la fuente. Con esto en mente, se deriva una solución UTD con IBC para los campos superficiales teniendo en cuenta las dependencias de la impedancia de superficie. La expansión asintótica se realiza, mediante la transformación de Watson, sobre la representación en serie de las funciones de Green correspondientes, evitando as í calcular las derivadas de orden superior de las integrales de tipo Fock, y dando lugar a una solución rápida y precisa. En los ejemplos numéricos realizados se observa una muy buena precisión cuando el cilindro y la separación entre el observador y la fuente son grandes. Esta solución, junto con el método de los momentos (MoM), se puede aplicar para el cálculo eficiente del acoplamiento mutuo de grandes arrays conformados de antenas de parches. Los métodos propuestos basados en UTD para el cálculo del campo electromagnético dispersado y superficial sobre un cilindro PEC recubierto de dieléctrico con una IBC efectiva suponen un primer paso hacia la generalización de una solución UTD para superficies metálicas convexas arbitrarias cubiertas por un material no conductor e iluminadas por una fuente electromagnética arbitraria. ABSTRACT With this thesis ”Development of a Uniform Theory of Diffraction for Scattered and Surface Electromagnetic Field Analysis on a Cylinder” we have initiated a line of investigation whose goal is to answer the following question: what is the surface impedance which describes a perfect electric conductor (PEC) convex structure covered by a material coating? These studies are of current and future interest for predicting the electromagnetic (EM) fields incident, radiating or propagating on locally smooth convex parts of highly metallic structures with a material coating, or by a lossy metallic surfaces, as for example in aerospace, maritime and automotive applications. Moreover, from a theoretical point of view, the surface impedance characterization of PEC surfaces with or without a material coating represents a generalization of independent solutions for both type of problems. A uniform geometrical theory of diffraction (UTD) is developed in this thesis for analyzing the canonical problem of EM scattered and surface field by an electrically large circular cylinder with an impedance boundary condition (IBC) in the high frequency regime, by means of a surface impedance characterization. The construction of a UTD solution for this canonical problem is crucial for the development of the corresponding UTD solution for the more general case of an arbitrary smooth convex surface, via the principle of the localization of high frequency EM fields. The development of the present doctoral thesis has been carried out through a series of landmarks that are enumerated as follows, emphasizing the main contributions that this work has given rise to. Initially, a profound revision is made in the state of art of asymptotic methods where numerous references are given. Thus, any reader may know the history of geometrical optics (GO) and geometrical theory of diffraction (GTD), which led to the development of UTD. Then, the UTD is deeply investigated and the main studies which are found in the literature are shown. This chapter situates us in the position to state that, as far as we know, nobody has attempted before to perform a rigorous research about the surface impedance characterization for material-coated PEC convex structures via UTD. First, a UTD solution is developed for the canonical problem of the EM scattering by an electrically large circular cylinder with a uniform IBC, when it is illuminated by an obliquely incident high frequency plane wave. A solution to this canonical problem is first constructed in terms of an exact formulation involving a radially propagating eigenfunction expansion. The latter is converted into a circumferentially propagating eigenfunction expansion suited for large cylinders, via the Watson transformation, which is expressed as an integral that is subsequently evaluated asymptotically, for high frequencies, in a uniform manner. The resulting solution is then expressed in the desired UTD ray form. This solution is uniform in the sense that it has the important property that it remains continuous across the transition region on either side of the surface shadow boundary. Outside the shadow boundary transition region it recovers the purely ray optical incident and reflected ray fields on the deep lit side of the shadow boundary and to the modal surface diffracted ray fields on the deep shadow side. The scattered field is seen to have a cross-polarized component due to the coupling between the TEz and TMz waves (where z is the cylinder axis) resulting from the IBC. Such cross-polarization vanishes for normal incidence on the cylinder, and also in the deep lit region for oblique incidence where it properly reduces to the GO or ray optical solution. This UTD solution is shown to be very accurate by a numerical comparison with an exact reference solution. Then, an effective IBC is developed for the EM scattered field on a coated PEC circular cylinder illuminated by an obliquely incident plane wave. Two surface impedances are derived in a direct relation with the TM and TE surface and creeping wave modes excited on a coated cylinder. The TM and TE surface impedances are coupled at oblique incidence, and depend on the geometry of the problem and the wave numbers. Nevertheless, a constant surface impedance is found, although with a different value when the observation point lays in the lit or in the shadow region. Then, a UTD solution for the scattering of an obliquely incident plane wave on an electrically large smooth convex coated PEC cylinder is introduced, via a generalization of the canonical circular cylinder problem. The asymptotic solution is uniform because it remains continuous across the transition region, in the vicinity of the shadow boundary, and it recovers the ray optical solution in the deep lit region and the creeping wave formulation within the deep shadow region. When a coating is present a cross-polar field term is excited, which vanishes at normal incidence and in the deep lit region. The limitations of the effective surface impedance formulas are discussed, and the UTD solution is compared with some reference solutions where a very good agreement is met. And in third place, an effective surface impedance approach is introduced for determining surface fields on an electrically large coated metallic circular cylinder. Differences in analysis of rigorouslytreated coated metallic cylinders and cylinders with an IBC are discussed. While for the impedance cylinder case a single constant or uniform surface impedance is considered, for the coated metallic cylinder case two surface impedances are derived. These are associated with the TM and TE creeping wave modes excited on a cylinder and depend on observation and source positions and orientations. With this in mind, a UTD based method with IBC is derived for the surface fields by taking into account the surface impedance variation. The asymptotic expansion is performed, via the Watson transformation, over the appropriate series representation of the Green’s functions, thus avoiding higher-order derivatives of Fock-type integrals, and yielding a fast and an accurate solution. Numerical examples reveal a very good accuracy for large cylinders when the separation between the observation and the source point is large. Thus, this solution could be efficiently applied in mutual coupling analysis, along with the method of moments (MoM), of large conformal microstrip array antennas. The proposed UTD methods for scattered and surface EM field analysis on a coated PEC cylinder with an effective IBC are considered the first steps toward the generalization of a UTD solution for large arbitrarily convex smooth metallic surfaces covered by a material coating and illuminated by an arbitrary EM source.

Comparison of NDVI fields obtained from different remote sensors

Satellite image data have become an important source of information for monitoring vegetation and mapping land cover at several scales. Beside this, the distribution and phenology of vegetation is largely associated with climate, terrain characteristics and human activity. Various vegetation indices have been developed for qualitative and quantitative assessment of vegetation using remote spectral measurements. In particular, sensors with spectral bands in the red (RED) and near-infrared (NIR) lend themselves well to vegetation monitoring and based on them [(NIR - RED) / (NIR + RED)] Normalized Difference Vegetation Index (NDVI) has been widespread used. Given that the characteristics of spectral bands in RED and NIR vary distinctly from sensor to sensor, NDVI values based on data from different instruments will not be directly comparable. The spatial resolution also varies significantly between sensors, as well as within a given scene in the case of wide-angle and oblique sensors. As a result, NDVI values will vary according to combinations of the heterogeneity and scale of terrestrial surfaces and pixel footprint sizes. Therefore, the question arises as to the impact of differences in spectral and spatial resolutions on vegetation indices like the NDVI and their interpretation as a drought index. During 2012 three locations (at Salamanca, Granada and Córdoba) were selected and a periodic pasture monitoring and botanic composition were achieved. Daily precipitation, temperature and monthly soil water content were measurement as well as fresh and dry pasture weight. At the same time, remote sensing images were capture by DEIMOS-1 and MODIS of the chosen places. DEIMOS-1 is based on the concept Microsat-100 from Surrey. It is conceived for obtaining Earth images with a good enough resolution to study the terrestrial vegetation cover (20x20 m), although with a great range of visual field (600 km) in order to obtain those images with high temporal resolution and at a reduced cost. By contranst, MODIS images present a much lower spatial resolution (500x500 m). The aim of this study is to establish a comparison between two different sensors in their NDVI values at different spatial resolutions. Acknowledgements. This work was partially supported by ENESA under project P10 0220C-823. Funding provided by Spanish Ministerio de Ciencia e Innovación (MICINN) through project no. MTM2009-14621 and i-MATH No. CSD2006-00032 is greatly appreciated.

Monitoring visual attention on a neurorehabilitation environment based on interactive video

The use of new technologies in neurorehabilitation has led to higher intensity rehabilitation processes, extending therapies in an economically sustainable way. Interactive Video (IV) technology allows therapists to work with virtual environments that reproduce real situations. In this way, patients deal with Activities of the Daily Living (ADL) immersed within enhanced environments [1]. These rehabilitation exercises, which focus in re-learning lost functions, will try to modulate the neural plasticity processes [2]. This research presents a system where a neurorehabilitation IV-based environment has been integrated with an eye-tracker device in order to monitor and to interact using visual attention. While patients are interacting with the neurorehabilitation environment, their visual behavior is closely related with their cognitive state, which in turn mirrors the brain damage condition suffered by them [3] [4]. Patients’ gaze data can provide knowledge on their attention focus and their cognitive state, as well as on the validity of the rehabilitation tasks proposed [5].

Surface impedance for scattered field on a dielectric-coated circular cylinder

In the scattering analysis of a circular cylindrical structure, the impedance boundary condition (IBC) can approximate and simplify the perfect electric conductor (PEC) boundary condition. The circular cylinder problem can be solved with modal methods but they require a large number of terms when the cylinder radius is large in terms of the wave length. The uniform theory of diffraction (UTD) [1] is commonly used to overcome this issue. The two-dimensional problem of scattering on a circular cylinder covered by a dielectric layer has been analyzed by [2]–[5], but their solutions either do not consider oblique incidence, fail on the transition region or use a constant surface impedance.

Bifurcation diagrams for polymer blends with diffuse interfaces in confined and adaptive geometries

Dynamics of binary mixtures such as polymer blends, and fluids near the critical point, is described by the model-H, which couples momentum transport and diffusion of the components [1]. We present an extended version of the model-H that allows to study the combined effect of phase separation in a polymer blend and surface structuring of the film itself [2]. We apply it to analyze the stability of vertically stratified base states on extended films of polymer blends and show that convective transport leads to new mechanisms of instability as compared to the simpler diffusive case described by the Cahn- Hilliard model [3, 4]. We carry out this analysis for realistic parameters of polymer blends used in experimental setups such as PS/PVME. However, geometrically more complicated states involving lateral structuring, strong deflections of the free surface, oblique diffuse interfaces, checkerboard modes, or droplets of a component above of the other are possible at critical composition solving the Cahn Hilliard equation in the static limit for rectangular domains [5, 6] or with deformable free surfaces [6]. We extend these results for off-critical compositions, since balanced overall composition in experiments are unusual. In particular, we study steady nonlinear solutions of the Cahn-Hilliard equation for bidimensional layers with fixed geometry and deformable free surface. Furthermore we distinguished the cases with and without energetic bias at the free surface. We present bifurcation diagrams for off-critical films of polymer blends with free surfaces, showing their free energy, and the L2-norms of surface deflection and the concentration field, as a function of lateral domain size and mean composition. Simultaneously, we look at spatial dependent profiles of the height and concentration. To treat the problem of films with arbitrary surface deflections our calculations are based on minimizing the free energy functional at given composition and geometric constraints using a variational approach based on the Cahn-Hilliard equation. The problem is solved numerically using the finite element method (FEM).

Wind tunnel study on the influence of different parapets on the roof pressure distribution of low-rise buildings

High suction loads appear on roofs of low-height buildings. The use of parapets with appropriate height at the roof edges alleviates these loads. The performance of six parapet configurations to decrease the suction loads induced on roofs by oblique winds has been studied in a low speed wind tunnel. The studied parapet configurations include vertical wall parapets, either solid or porous, and cantilevered parapets formed by a small horizontal roof close to the building roof. Low-height parapets with a medium porosity and cantilevered parapets are more efficient than solid parapets to reduce the wind suctions generated on the roofs by conical vortices.

A parametric, experimental analysis of conical vortices on curved roofs of low-rise buildings

Different methods to reduce the high suction caused by conical vortices have been reported in the literature: vertical parapets, either solid or porous, placed at the roof edges being the most analysed configuration. Another method for alleviating the high suction peaks due to conical vortices is the use of some non-standard parapet configuration like cantilever parapets. In this paper the influence of roof curvature on the conical vortex pattern appearing on a curved roof (Fig. 1) when subject to oblique winds is experimentally analysed by testing the mean pressure distribution on the curved roofs of low-rise building models in a wind tunnel. Also, the efficiency of cantilever parapets to reduce mean suction loads on curved roofs is experimentally checked. Very high suction loads have been measured on curved roofs, the magnitude of these high suction loads being significantly decreased when cantilever parapets are used. Thus, the suitability of these parapets to reduce wind pressure loads on curved roofs is demonstrated.

La modernidad paradigmática de la arquitectura popular. Orígenes y evolución de su descubrimiento en las publicaciones periódicas de arquitectura en España 1897-1958

La aparición de la arquitectura popular en la escena de la cultura arquitectónica siempre ha estado rodeada de escasa claridad, especialmente si se trata de determinar las circunstancias en que apareció el interés por ella o la primera vez que fue mostrada en alguna publicación. El origen de la estimación de la arquitectura popular como tal se presenta en principio envuelto en una nebulosa, difuminado por la suposición de un siempre anterior conocimiento de ella -por la obviedad de este fenómeno-, y por la escasa atención prestada al tema, a lo que hay que sumar los desconcertantes indicios de que en realidad sólo ha sido apreciada en tiempos más recientes. Este estudio intenta arrojar luz sobre ese momento en que la arquitectura popular es descubierta, reconocida y difundida, y posteriormente estudiada con detenimiento hasta que llega a adquirir el status que le corresponde, en el ámbito del territorio español. La arquitectura popular no aparece en un momento determinado, como cualquier tendencia en la evolución de cierta sensibilidad estética o movimiento. La arquitectura popular siempre ha estado ahí. Lo único que cambia, y que permite que de repente la arquitectura popular sea tenida en cuenta, es la mirada de quien la descubre, la valora, la estudia o la propone como fenómeno digno de la atención y la estimación de los arquitectos. Así pues, la interpretación de la arquitectura popular como una forma más de las distintas que adopta la arquitectura como manifestación técnica y artística, plenamente aceptada dentro la concepción vigente de la época, es la historia de las miradas que se han dirigido a ella, de las distintas sensibilidades que han reparado en ella y de las tendencias arquitectónicas, construidas o teóricas, que han acudido a ella como fuente de inspiración o como modelo de virtudes constructivas o proyectuales. Desde este punto de vista se hace necesario investigar en las diferentes etapas de la modernidad en España, en sus acontecimientos, sus discursos, y sus obras construidas, partiendo de las distintas mentalidades que las sustentaron, para de este modo profundizar en la trayectoria seguida a través del tiempo histórico y del espacio geográfico en que se han desarrollado esas miradas. Para ello se ha realizado un estudio de las publicaciones periódicas de arquitectura españolas como elementos susceptibles de proporcionar la información más fidedigna posible sobre el interés en la difusión, el debate y la reflexión arquitectónica en torno a este fenómeno de la arquitectura popular. Es conocido el inestimable valor de las revistas como transmisoras no sólo de los acontecimientos de actualidad –la arquitectura popular no es uno de ellos- sino de la opinión y la forma de pensar de la intelectualidad del mundo de la ciencia y del arte, de los arquitectos en sus distintas actividades –profesional, docente, teórica, directiva, artística- y de las instituciones y personajes vinculadas al mundo de la arquitectura y la edificación. Es además relevante el hecho de que proporcionan una visión inmejorable de la época en que se publican, con datos importantes de carácter social, cultural, político o económico, que facilitan el encuadre de los acontecimientos estudiados en su contexto histórico y permiten un acercamiento a éstos de una forma más afinada. ABSTRACT Vernacular architecture’s appearance in the architectural culture’s scene has always been involved by certain obscureness, specially if the task is to know the circumstances of its first appealing, or the first time that was published. Original vernacular architecture’s valuation in its own seems to be involved in a vague nebula, blurred by the supposed fact of an always previous and obvious knowledge, and the scarce attention kept over this theme, increased in confusion when considering some last traces showing that only in recent times it has been really appreciated. This work searches for clarity inquiring those moments in which vernacular architecture is discovered, then recognised and issued, and finally broadly studied till reaches the status that has today. This investigation is focused on the spanish context. Vernacular architecture does not come out at a certain moment, as any artistic or stylish trend; it has always been there. The only thing that changes, and suddenly makes vernacular architecture take place in architects’ mind, is the observer’s glance, who discovers it and takes care about it, studying and proposing it as a worthy architectonic phenomenon that deserves architect’s attention. Thus, vernacular architecture’s interpretation, as another one of the several forms of conceiving architecture as a technical and artistic expression, fully accepted in the spirit of its time, is the story of the glances that have focused on it, the story of the varied sensibilities that have felt concerned with it, and the story of theoretical or practical trends that gaze it as an inspiration’s source or a model for functional or designing values. From this point of view is necessary to dive into the different ages of modernity, their events, their programs, and their built architecture, departing from the different attitudes developing in the historic time and the geographic space of Spain. With this purpose it has been realized this study on spanish periodical journalism specialized in architecture, searching for the most reliable information possible, due to their attention to teorethical discussion, critique, and thoughts about the fact of vernacular architecture. Is well known the value of architecture magazines as excellent diffusers, not only of hot news –vernacular architecture is not one of them- , but also of intellectual activity in science and art, of the architects in their different activities –professional, academic, theoretical, executive, artistic- and of outstanding people and Institutions linked with architecture and building. Is also remarkable the fact that they provide an unbeatable vision of the whole world in the moment they appear, bringing at the same time significant information about social, cultural, political or economic nature, that make easier the understanding of the historical context, in a more fitting way.

Idas y venidas. Los viajes de arquitectura en España entre 1920 y 1960

Esta tesis se propone indagar en las vias por las que la arquitectura española cambió en el periodo comprendido entre 1920 y 1960 y el papel que los viajes tuvieron en dicho cambio. La investigación busca demostrar que, junto a otros factores como la llegada de revistas y libros y las conferencias de arquitectos de la talla de Le Corbusier, Gropius, Mendelsohn, Neutra o Aalto, los viajes tuvieron un papel clave en el proceso de apertura de miras y que provocó que, bien a traves de lo publicado en las revistas por los “arquitectos viajeros” o por el reflejo que tuvo lo conocido fuera de nuestras fronteras en proyectos y obras concretas, un buen numero de arquitectos, que no tuvieron la posibilidad de viajar, pudieron conocer que existía una realidad muy distinta a la que los profesores en la Escuela les habían enseñado o a la que estaban acostumbrados a ver en otros arquitectos de generaciones anteriores basada, en buena medida, en la recuperación de un estilo propio nacional centrandose en los historicismos. A lo largo de la investigación trataremos de ver que efecto produjo la apertura de fronteras y que papel tuvieron los viajes en dicho proceso. También nos centraremos en comprobar hasta qué punto cambió la manera de ver la arquitectura de los protagonistas del viaje y de aquellos que recibieron la información por ellos encontrada. Veremos cómo dicha información es cuantificable, clasificable y demostrable en propuestas concretas. Será importante ver que motivó su salida, que buscaban y que encontraron así como, entre las influencias recibidas, cuales tuvieron un mayor calado: las propuestas europeas o las americanas, y dentro de las primeras, las holandesas, las alemanas o las francesas. Los objetivos que se persigue conseguir son: contribuir a un mayor conocimiento de la arquitectura entre 1920 y 1960 a través de las conexiones internacionales y el ensanchamiento de horizontes, recopilar, clasificar y analizar todo el material obtenido relacionando los viajes con las biografías de los arquitectos protagonistas, estudiar qué interesa a los arquitectos españoles cuando van fuera y porqué (será importante ver quiénes de entre los arquitectos son más abiertos a las corrientes europeas y que motivó su salida en busca de nuevos lenguajes), ordenar las reflexiones que exponen los arquitectos a la vuelta de sus viajes y ver en que propuestas y de qué forma los arquitectos plasman lo encontrado en su búsqueda en el extranjero. Para conseguir estos objetivos estructuraremos la investigación en tres bloques: En el primero de ellos nos centraremos en profundizar como era la arquitectura española a principios del siglo XX. Para poder entender mejor las transformaciones que los viajes provocaron será necesario conocer cuál era la arquitectura predominante en estos años que, como veremos, consistía en la búsqueda de un estilo nacional propio dirigiendo su mirada al pasado. También veremos cómo un grupo de arquitectos (Palacios, Flórez, Torres Balbás o Anasagasti) fueron pioneros en el deseo de mirar fuera de nuestras fronteras así como dedicaremos especial atención a cómo era la formación en la Escuela. El segundo capítulo, que abarca desde principios de los años 20 hasta la Guerra Civil, tratará de demostrar la importancia que tuvo en el proceso de permeabilidad frente a las corrientes extranjeras los viajes que los arquitectos realizaron y que, sumados a la llegada de revistas y las visitas de los principales arquitectos modernos, provocaron una primera apertura como respuesta a los historicismos predominantes. Entre los arquitectos viajeros destacaremos las figuras de Fernando García Mercadal (incidiendo en su importancia como difusor de la arquitectura moderna), Rafael Bergamín, Ramón Sánchez Arcas y Luis Lacasa. También nos detendremos en ver la importancia que tuvieron las exposiciones (con especial atención a la de Artes Decorativas de París de 1925 y la de la Deutscher Werkbund en Stuttgart en 1927) que se realizaron estos años y como llegó la información a nuestro país. El tercer y último capítulo arranca con el periodo de posguerra, una época de transición pues los viajes que se realizaron fueron escasos y en la mayoría de las ocasiones no se llevaron a cabo en busca de nuevos caminos. Veremos cómo tras la Guerra y de la mano de la dictadura se produce, de la misma forma que en la Alemania nazi, una vuelta al interés por los historicismos de principios de siglo. Para entender mejor este periodo haremos un repaso a la obra de Luis Gutiérrez Soto por ser explicativa de lo cambiante de las corrientes arquitectónicas de estos años. Tras el análisis de los sucedido en posguerra nos dedicaremos a analizar, de la misma forma que en el primer periodo, la manera en que se produjo el rechazo al estilo nacional de nuevo gracias a la llegada de libros y revistas, lo publicado por las revistas españolas, las visitas de arquitectos de prestigio así como los viajes de un grupo de arquitectos que, de manera individual, salieron al extranjero en busca de apoyo, de referencias en los que cimentar su arquitectura. De este grupo, por la importancia que los propios protagonistas dieron al hecho de viajar como complemento a su formación y por la manera en la que reflejaron lo aprendido en proyectos concretos destacamos a Francisco de Asís Cabrero, Miguel Fisac, Ramón Vázquez Molezún y Francisco Javier Sáenz de Oiza. De nuevo, igual que en el primer capítulo finalizaremos la investigación dedicando un apartado a las exposiciones (fundamentalmente la Interbau de Berlín de 1957) celebradas en estos años. Para finalizar estableceremos las conclusiones que nos llevarán a comprobar hasta qué punto la arquitectura española en los periodos previo y posterior a la guerra cambió y en qué medida tuvieron importancia los viajes que los arquitectos españoles realizaron al extranjero en dicho cambio… ABSTRACT This thesis aims to look at the ways which Spanish architecture changed in the period between 1920 and 1960, and the way it was effected by travelling . The research will demonstrate that, together with other factors, such as the arrival of magazines, books, conferences and architects like Le Corbusier, Gropius, Mendelsohn, Neutra or Aalto, travelling played a key role in architecture. Also, it changed the way we look at architecture. Travelling, thanks to the published journals by "travelling architects” and the influence that they had - known beyond our borders in projects and concrete works, caused the arrival of a new type of architects. Even those who were not able to travel, knew that there was a very different reality than the reality the teachers at the school had taught them. Also, the “new reality” was different from the one that they were used to seeing in other architects of earlier generations, based mainly on the recovery of a national style focused on historicism. Throughout the investigation I will try to show the effect that the opening of borders and travelling had on this process. We will also focus on checking how it changed the way we see the architecture, from the point of view of the protagonists of the travels and those who received the information . We will see how that information is quantifiable and demonstrably classifiable into concrete proposals. It will be important to see which led to their departure. They sought and found among the influences, which had a major impact: the proposed European or American, and within the first, Dutch, German or French. The objectives to be achieved are: To contribute to a better understanding of architecture between 1920 to 1960 by the international connections, and widening the horizon. To collect, classify and analyze all obtained materials related to travelling with biographies of architects protagonists. To study what the interests of the Spanish architects were when they went abroad and why ( it will be important to see who among those architects were more open to European trends and prompted their departures for new languages). To order reflections exhibited by architects around his travels and to see what proposals and how architects reflected what they found in their search abroad. To achieve these objectives we will structure this research in three areas: In the first one, we will focus on how the Spanish architecture in the early twentieth century was. To better understand the changes that travelling caused it is necessary to understand that the predominant architecture in these years was in pursuit of its own national style, directing its gaze to the past, like we shall see. We will also see how a group of architects (Palacios, Flórez, Torres Balbás or Anasagasti) pioneered by looking beyond our borders and devote special attention to how the training was in the School. The second chapter, ranging from early 20s to the Civil War, will try to demonstrate the importance that travelling had in the process of diffusion currents. That, together with the arrival of magazines and visits by leading modern architects, led to a first opening in architecture, in response to the prevailing historicism. Among the travelers we highlight architects like Fernando García Mercadal (stressing his importance as a disseminator of modern architecture), Rafael Bergamín, Ramón Sánchez Arcas and Luis Lacasa. We will also stop to see the importance of exhibitions (with special attention to the Decorative Arts in Paris in 1925 and the Deutscher Werkbund in Stuttgart in 1927) that were held over the years and how the information came to our country . The third and final chapter starts with the post war period, a time of transition for the travels, which were scarce and in most cases were not conducted on new roads. We will see that after the war and with the dictatorship, a return to interest in historicism of the century occurred, just as in Nazi Germany. For better understanding of this period we will review the work of Luis Gutiérrez Soto. His work is explanatory of the changing of architectural trends over these years. After analyzing the case in post war, we turn to analyze, in the same way as in the first period, the manner in which rejection occurred in national style again with the arrival of books and magazines. Visits by prestigious architects and group travels of architects who, individually, went abroad in search of support, references on which to base their architecture. In this group of architects, due to the importance that the protagonists gave to the act of traveling to improve their training and the way in which they reflected what they learned in practical projects, I include Francisco de Asís Cabrero, Miguel Fisac, Ramon Vazquez Molezún and Francisco Javier Saenz de Oiza. Again, as in the first chapter, we will conclude the investigation dedicating a section to the exhibitions held in these years (mainly Interbau Berlin, 1957). Finally establishing conclusions lead us to see how far the Spanish architecture in the pre- and post -war periods changed and how much the trips were important to Spanish architects who performed abroad on the change...

La mirada como origen del proyectar

Iniciando con una aproximación a los conceptos de "mirada" y "modos de ver' nos preguntamos cómo es nuestra relación con el mundo y cómo el entorno que nos rodea se relaciona con nosotros. De la mano de S.Calle, P.Auster o C.Nolan como ejemplos prácticos y apoyados en teóricos como G.Didi Huberman, M.Foucault o W.Benjamin entendemos la posibilidad de la mirada como origen del proyectar. Todo esto a través de unos recorridos sobre el ser de la mirada; entendiendo origen como un "remolino en el río" o proyectar como un "anteponerse a algo". Building upon an initial approach to the concepts of "gaze" and "ways of seeing" the question is raised on the nature of our relationship with the world, as well as on how the surrounding environment relates to us. From the practica! examples of S. Calle, P.Auster or C. Nolan and the theoretical framework of G.Didi-Huberman , M.Foucault or W.Benjamin an understanding is developed of the possibilities of gaze as an origin of projects. All this is developed as a journey through the entity of gaze; understanding originas a 'swirl on the river , and project as a 'foreshadowing'.