The Learning of the subject Biology in a Master in Biomedical Physics

BIOLOGY is a dynamic and fascinating science. The study of this subject is an amazing trip for all the students that have a first contact with this subject. Here, we present the development of the study and learning experience of this subject belonging to an area of knowledge that is different to the training curriculum of students who have studied Physics during their degree period. We have taken a real example, the “Elements of Biology” subject, which is taught as part of the Official Biomedical Physics Master, at the Physics Faculty, of the Complutense University of Madrid, since the course 2006/07. Its main objective is to give to the student an understanding how the Physics can have numerous applications in the Biomedical Sciences area, giving the basic training to develop a professional, academic or research career. The results obtained when we use new virtual tools combined with the classical learning show that there is a clear increase in the number of persons that take and pass the final exam. On the other hand, this new learning strategy is well received by the students and this is translated to a higher participation and a decrease of the giving the subject up

Nanoinformatics knowledge infrastructures: bringing efficient information management to nanomedical research

Nanotechnology represents an area of particular promise and significant opportunity across multiple scientific disciplines. Ongoing nanotechnology research ranges from the characterization of nanoparticles and nanomaterials to the analysis and processing of experimental data seeking correlations between nanoparticles and their functionalities and side effects. Due to their special properties, nanoparticles are suitable for cellular-level diagnostics and therapy, offering numerous applications in medicine, e.g. development of biomedical devices, tissue repair, drug delivery systems and biosensors. In nanomedicine, recent studies are producing large amounts of structural and property data, highlighting the role for computational approaches in information management. While in vitro and in vivo assays are expensive, the cost of computing is falling. Furthermore, improvements in the accuracy of computational methods (e.g. data mining, knowledge discovery, modeling and simulation) have enabled effective tools to automate the extraction, management and storage of these vast data volumes. Since this information is widely distributed, one major issue is how to locate and access data where it resides (which also poses data-sharing limitations). The novel discipline of nanoinformatics addresses the information challenges related to nanotechnology research. In this paper, we summarize the needs and challenges in the field and present an overview of extant initiatives and efforts.

Polymer interaction with macroscopic carbon nanotube fibres and fabrication of nanostructured composites

El ensamblado de nanotubos de carbono (CNT) como una fibra macroscópica en la cual están orientados preferentemente paralelos entre sí y al eje de la fibra, ha dado como resultado un nuevo tipo de fibra de altas prestaciones derivadas de la explotación eficiente de las propiedades axiales de los CNTs, y que tiene un gran número de aplicaciones potenciales. Fibras continuas de CNTs se produjeron en el Instituto IMDEA Materiales mediante el proceso de hilado directo durante la reacción de síntesis por deposición química de vapores. Uno de los objetivos de esta tesis es el estudio de la estructura de estas fibras mediante técnicas del estado del arte de difracción de rayos X de sincrotrón y la elaboración de un modelo estructural de dicho material. Mediciones texturales de adsorción de gases, análisis de micrografías de electrones y dispersión de rayos X de ángulo alto y bajo (WAXS/SAXS) indican que el material tiene una estructura mesoporosa con una distribución de tamaño de poros ancha derivada del amplio rango de separaciones entre manojos de CNTs, así como una superficie específica de 170m2/g. Los valores de dimensión fractal obtenidos mediante SAXS y análisis Barrett-Joyner-Halenda (BJH) de mediciones texturales coinciden en 2.4 y 2.5, respectivamente, resaltando el carácter de red de la estructura de dichas fibras. La estructura mesoporosa y tipo hilo de las fibra de CNT es accesible a la infiltración de moléculas externas (líquidos o polímeros). En este trabajo se estudian los cambios en la estructura multiescala de las fibras de CNTs al interactuar con líquidos y polímeros. Los efectos de la densificación en la estructura de fibras secas de CNT son estudiados mediante WAXS/SAXS. El tratamiento de densificación junta los manojos de la fibra (los poros disminuyen de tamaño), resultando en un incremento de la densidad de la fibra. Sin embargo, los dominios estructurales correspondientes a la transferencia de esfuerzo mecánica y carga eléctrica en los nanotubos no son afectados durante este proceso de densificación; como consecuencia no se produce un efecto sustancial en las propiedades mecánicas y eléctricas. Mediciones de SAXS and fibra de CNT antes y después de infiltración de líquidos confirman la penetración de una gran cantidad de líquidos que llena los poros internos de la fibra pero no se intercalan entre capas de nanotubos adyacentes. La infiltración de cadenas poliméricas de bajo peso molecular tiende a expandir los manojos en la fibra e incrementar el ángulo de apertura de los poros. Los resultados de SAXS indican que la estructura interna de la fibra en términos de la organización de las capas de tubos y su orientación no es afectada cuando las muestras consisten en fibras infiltradas con polímeros de alto peso molecular. La cristalización de varios polímeros semicristalinos es acelerada por la presencia de fibras de CNTs alineados y produce el crecimiento de una capa transcristalina normal a la superficie de la fibra. Esto es observado directamente mediante microscopía óptica polarizada, y detectado mediante calorimetría DSC. Las lamelas en la capa transcristalina tienen orientación de la cadena polimérica paralela a la fibra y por lo tanto a los nanotubos, de acuerdo con los patrones de WAXS. Esta orientación preferencial se sugiere como parte de la fuerza impulsora en la nucleación. La nucleación del dominio cristalino polimérico en la superficie de los CNT no es epitaxial. Ocurre sin haber correspondencia entre las estructuras cristalinas del polímero y los nanotubos. Estas observaciones contribuyen a la compresión del fenómeno de nucleación en CNTs y otros nanocarbonos, y sientan las bases para el desarrollo de composites poliméricos de gran escala basados en fibra larga de CNTs alineados. ABSTRACT The assembly of carbon nanotubes into a macroscopic fibre material where they are preferentially aligned parallel to each other and to the fibre axis has resulted in a new class of high-performance fibres, which efficiently exploits the axial properties of the building blocks and has numerous applications. Long, continuous CNT fibres were produced in IMDEA Materials Institute by direct fibre spinning from a chemical vapour deposition reaction. These fibres have a complex hierarchical structure covering multiple length scales. One objective of this thesis is to reveal this structure by means of state-of-the-art techniques such as synchrotron X-ray diffraction, and to build a model to link the fibre structural elements. Texture and gas absorption measurements, using electron microscopy, wide angle and small angle X-ray scattering (WAXS/SAXS), and pore size distribution analysis by Barrett-Joyner-Halenda (BJH), indicate that the material has a mesoporous structure with a wide pore size distribution arising from the range of fibre bundle separation, and a high surface area _170m2/g. Fractal dimension values of 2.4_2.5 obtained from the SAXS and BJH measurements highlight the network structure of the fibre. Mesoporous and yarn-like structure of CNT fibres make them accessible to the infiltration of foreign molecules (liquid or polymer). This work studies multiscale structural changes when CNT fibres interact with liquids and polymers. The effects of densification on the structure of dry CNT fibres were measured by WAXS/SAXS. The densification treatment brings the fibre bundles closer (pores become smaller), leading to an increase in fibre density. However, structural domains made of the load and charge carrying nanotubes are not affected; consequently, it has no substantial effect on mechanical and electrical properties. SAXS measurements on the CNT fibres before and after liquid infiltration imply that most liquids are able to fill the internal pores but not to intercalate between nanotubes. Successful infiltration of low molecular weight polymer chains tends to expand the fibre bundles and increases the pore-opening angle. SAXS results indicate that the inner structure of the fibre, in terms of the nanotube layer arrangement and the fibre alignment, are not largely affected when infiltrated with polymers of relatively high molecular weight. The crystallisation of a variety of semicrystalline polymers is accelerated by the presence of aligned fibres of CNTs and results in the growth of a transcrystalline layer perpendicular to the fibre surface. This can be observed directly under polarised optical microscope, and detected by the exothermic peaks during differential scanning calorimetry. The discussion on the driving forces for the enhanced nucleation points out the preferential chain orientation of polymer lamella with the chain axis parallel to the fibre and thus to the nanotubes, which is confirmed by two-dimensional WAXS patterns. A non-epitaxial polymer crystal growth habit at the CNT-polymer interface is proposed, which is independent of lattice matching between the polymer and nanotubes. These findings contribute to the discussion on polymer nucleation on CNTs and other nanocarbons, and their implication for the development of large polymer composites based on long and aligned fibres of CNTs.

Implementación de plug-ins para REAPER: módulo de reverberación convolutiva en tiempo real y sistema para la medición de respuestas acústicas en salas

Existen en el mercado numerosas aplicaciones para la generación de reverberación y para la medición de respuestas al impulso acústicas. Sin embargo, éstas son de precios muy elevados y/o no se permite acceder a su código y, mucho menos, distribuir de forma totalmente libre. Además, las herramientas que ofrecen para la medición de respuestas al impulso requieren de un tedioso proceso para la generación de la señal de excitación, su reproducción y grabación y, finalmente, su post-procesado. Este procedimiento puede llevar en ocasiones al usuario a cometer errores debido a la falta de conocimientos técnicos. El propósito de este proyecto es dar solución a algunos de los inconvenientes planteados. Con tal fin se llevó a cabo el desarrollo e implementación de un módulo de reverberación por convolución particionada en tiempo real, haciendo uso de software gratuito y de libre distribución. En concreto, se eligió la estación digital de trabajo (DAW. Digital Audio Worksation) REAPER de la compañía Cockos. Además de incluir las funcionalidades básicas de edición y secuenciación presentes en cualquier DAW, el programa incluye un entorno para la implementación de efectos de audio en lenguaje JS (Jesusonic), y se distribuye con licencias completamente gratuitas y sin limitaciones de uso. Complementariamente, se propone una extensión para REAPER que permite la medición de respuestas al impulso de recintos acústicos de una forma completamente automatizada y amigable para el usuario. Estas respuestas podrán ser almacenadas y posteriormente cargadas en el módulo de reverberación, permitiendo aplicar sobre nuestras pistas de audio la respuesta acústica de cualquier recinto en el que se hayan realizado medidas. La implementación del sistema de medida de respuestas se llevó a cabo empleando la herramienta ReaScript de REAPER, que permite la ejecución de pequeños scripts Python. El programa genera un Barrido Sinusoidal Logarítmico que excita el recinto acústico cuya respuesta se desea medir, grabando la misma en un archivo .wav. Este procedimiento es sencillo, intuitivo y está al alcance de cualquier usuario doméstico, ya que no requiere la utilización de sofisticado instrumental de medida. ABSTRACT. There are numerous applications in the market for the generation of reverb and measurement of acoustic impulse responses. However, they are usually very costly and closed source. In addition, the provided tools for measuring impulse responses require tedious processes for the generation and reproduction of the excitation signal, the recording of the response and its final post-processing. This procedure can sometimes drive the user to make mistakes due to the lack of technical knowledge. The purpose of this project is to solve some of the mentioned problems. To that end we developed and implemented a real-time partitioned convolution reverb module using free open source software. Specifically, the chosen software was the Cockos’ digital audio workstation (DAW) REAPER. In addition to the basic features included in any DAW, such as editing and sequencing, the program includes an environment for implementing audio effects in JS (Jesusonic) language of free distribution and features an unrestricted license. As an extension for REAPER, we propose a fully automated and user-friendly method for measuring rooms’ acoustic impulse responses. These will be stored and then loaded into the reverb module, allowing the user to apply the acoustical response of any room where measurement have been taken to any audio track. The implementation of the impulse response measurement system was done using REAPER’s ReaScript tool that allows the execution of small Python scripts. The program generates a logarithmic sine sweep that excites the room and its response is recorded in a .wav file. This procedure is simple, intuitive and it is accessible to any home user as it does not require the use of sophisticated measuring equipment.

MEIA SYSTEMS: Membrane Encrypted Information Applications Systems

Membrane computing is a recent area that belongs to natural computing. This field works on computational models based on nature's behavior to process the information. Recently, numerous models have been developed and implemented with this purpose. P-systems are the structures which have been defined,developed and implemented to simulate the behavior and the evolution of membrane systems which we find in nature. What we show in this paper is a new model that deals with encrypted information which provides security the membrane systems communication. Moreover we find non deterministic and random applications in nature that are suitable to MEIA systems. The inherent parallelism and non determinism make this applications perfect object to implement MEIA systems.