Gestión de la fertilidad de suelos y la nutrición de plantaciones de teca (Tectona grandis L.f.) en América Central

La teca (Tectona grandis L.f.) ha sido tradicionalmente considerada como una madera preciosa en los países del SE Asiático, de donde es originaria, pero durante las últimas décadas ha alcanzado especial relevancia en el sector internacional de las maderas tropicales duras de buena calidad. La especie ha sido ampliamente establecida en América Central, donde tiene una gran importancia socioeconómica, tanto por el impacto de las grandes empresas multinacionales que gestionan grandes plantaciones en la región, como por el gran número de pequeños y medianos propietarios que han elegido esta especie para reforestar sus tierras. Pese a la gran importancia de esta especie, se ha desarrollado relativamente poca investigación acerca de su nutrición y de la gestión del suelo necesaria para su establecimiento y mantenimiento en condiciones sostenibles y productivas. En la presente Tesis Doctoral, tras realizar una amplia revisión bibliográfica, se caracterizan los suelos y la nutrición de las plantaciones de teca en América Central y se proponen varias herramientas para la mejora de su gestión. Las plantaciones de teca de América Central presentan habitualmente deficiencias de K y P, además de algunos problemas de acidez ocasionales. Estos se originan, principalmente, por la mala selección de sitio que se realizó en las últimas dos décadas del siglo XX y por el establecimiento de plantaciones de teca por pequeños propietarios en terrenos que no tienen características propicias para la especie. Además, estos problemas comunes relativos a la baja disponibilidad de P y de K en el suelo son causantes de las relativamente bajas concentraciones foliares de estos elementos (0,88±0,07% K y 0,16±0,04% P) encontradas en plantaciones de teca características de la región. Se presentan varios modelos estadísticos que permiten a los gestores: (a) usarlos como referencia para la interpretación de análisis foliares, ya que ofrecen valores que se consideran característicos de plantaciones de teca con un buen estado nutricional; (b) estimar la cantidad de nutrientes acumulados en la biomasa aérea de sus plantaciones y, sobre todo, su extracción a través de la madera en un aprovechamiento forestal, bien sea una clara o la corta final. La gran acumulación de N, P y K en plantaciones de teca ha de ser considerada como un factor fundamental en su gestión. Además, P y K adquieren mayor relevancia aún ya que su extracción del sistema a través de la madera y su escasa disponibilidad en los suelos hacen que se presente un importante desequilibrio que pone en riesgo la sostenibilidad del sistema. En ese sentido, cambiar la época de cosecha, de la actual (en Enero-Mayo) a Septiembre o Diciembre, puede reducir entre un 24 y un 28% la salida de N asociada a la extracción de madera, un 29% la de P y entre un 14 y un 43% la de K. Se estima que la concentración foliar de P es un factor limitante de la productividad de plantaciones de teca en América Central, proponiéndose un nivel crítico de 0,125%. Además, la teca presenta una tolerancia muy baja a suelos salinos, tendencia que no había sido señalada hasta el momento, siendo muy alta la probabilidad de que la plantación tenga un crecimiento lento o muy lento cuando la Saturación de Na es mayor de 1,1%. Por otro lado, se confirma que K es uno de los elementos clave en la nutrición de las plantaciones de teca en la región centroamericana, proponiéndose un nivel crítico provisional de 3,09% para la Saturación de K, por encima del cual es muy probable que la plantación tenga un crecimiento muy alto. Se ha comprobado que las técnicas estadísticas de análisis multivariante pueden ser usadas como herramientas para agrupar los rodales en base a sus similitudes en cuanto a la fertilidad del suelo y mejorar así el diseño de planes de fertilización en plantaciones con una superficie relativamente grande. De esta manera, se pueden ajustar planes de fertilización más eficientes a escala de grupos de rodales, como un primer paso hacia la selvicultura de precisión, intensificando y diversificando la gestión en función de las diferencias edáficas. Finalmente, aunque los análisis foliares y de suelos indiquen la existencia de deficiencias nutricionales, la fertilización de las plantaciones no siempre va a producir efectos positivos sobre su crecimiento si no se diseña adecuadamente teniendo en cuenta varios factores que pueden estar influyendo negativamente en dicha respuesta, como la densidad de las plantaciones (sinergias con la programación de los clareos y claras) y la elección de la dosis y del producto a aplicar (habitualmente dosis bajas de N-P-K en lugar de incluir otros nutrientes como Mg, B y Zn o usar otros productos como micorrizas, biofertilizantes etc…). ABSTRACT Teak (Tectona grandis L.f.) has been traditionally considered as a precious wood in SE Asia, where it is indigenous. However, during recent decades the species has reached worldwide relevance in the tropical high quality hardwood sector. Teak has been widely established in Central America, where it has become a key species in the forest sector due to its socioeconomic impact, either because of the big-scale plantations of transnational companies and the abundant small-scale plantations established by many farmers. Despite the relevance of the species, little research has been carried out regarding its soil fertility and nutrition management, a key issue both for sustainability and productivity. The present Thesis performs a literature review to this respect, characterize the soil fertility and the nutrition of teak plantations of Central America and propose several management tools. Soil deficiencies of K and P are usually found in teak plantations in Central America, in addition to occasional acidity problems. These problems are mainly derived of (a) a poor site selection performed during 80s and 90s; and (b) small-scale plantations by farmers in sites which are not adequate for the species. These common soil fertility problems related with P and K soil availability are probably the cause of the relatively low P and K foliar concentration (0,88±0,07% K y 0,16±0,04% P) found in representative teak plantations of the region. Several statistical models are proposed, which allow forest managers to: (a) use them as a reference for foliar analysis interpretation, as they show values considered as representative for teak plantations with an adequate nutritional status in the region; (b) estimate the amount of nutrients accumulated in the aerial biomass of the plantations and, especially, the amount of them which are extracted from the systems as wood is harvested in thinning or final clearcuts. The accumulation of N, P and K result in a key factor for teak management in the region. This turns out to be especially relevant for the P and K because their high output rate by timber extraction and the low soil availability result in an important unbalance which constitutes a risk regarding the sustainability of the system. To this respect, modifying the harvesting time from the usual right now (January-May, business as usual scenario) to September or December (proposed alternatives) can reduce between 24 and 28% the N output associated to timber extraction, 29% the P output and between 14 and 43% the K. Foliar P concentration is a main limiting factor for teak plantations productivity in Central America and a 0.125% critical level is proposed. In addition, the results show a very low tolerance for soil salinity, tendency which was not previously reported. Hence, the probability of teak plantations to have low or very low Site Index is high when Na Saturation is higher than 1.1%. On the other hand, K is confirmed as one of the key nutrients regarding teak nutrition in Central America and a 3.09% provisional critical level is proposed for K Saturation; when values are above this level the probability of having very high Site Index is high. Multivariate statistical analyses have been successfully tested to be used as tools to group forest stands according to their soil fertility similarities. Hence, more efficient fertilization plans can be designed for each group of stands, intensifying and diversifying nutritional management according to soil fertility differences. This methodology, which is considered as a first step towards precision forestry, is regarded as helpful tool to design fertilization plans in big scale plantations. Finally, even though foliar and soil analysis would point out some nutritional deficiencies in a forest stand, the results show how the fertilization is not always going to have a positive effect over forest growth if it is not adequately designed. Some factors have been identified as determinants of tree response to fertilization: density (synergisms between fertilization and thinning scheduling) and the appropriate selection of dosages and product (usually low dosages are applied and N-P-K is preferred instead of applying other nutrients such as Mg, B or Zn or using other alternatives such as mycorrhizas or biofertilizers).

Seasonal evolution of soil respiration in a mixed forestry plantation of walnuts (Juglans × intermedia Carr.) and alders (Alnus cordata (Loisel.) Duby) in Domaine de Restinclières (France)

The ecological intensification of crops is proposed as a solution to the growing demand of agricultural and forest resources, in opposition to intensive monocultures. The introduction of mixed cultures as mixtures between nitrogen fixing species and non nitrogen fixing species intended to increase crop yield as a result of an improvement of the available nitrogen and phosphorus in soil. Relationship between crops have received little attention despite the wide range of advantages that confers species diversity to these systems, such as increased productivity, resilience to disruption and ecological sustainability. Forests and forestry plantations can develop an important role in storing carbon in their tissues, especially in wood which become into durable product. A simplifying parameter to analyze the amount allocated carbon by plantation is the TBCA (total belowground carbon allocation), whereby, for short periods and mature plantations, is admitted as the subtraction between soil carbon efflux and litterfall. Soil respiration depends on a wide range of factors, such as soil temperature and soil water content, soil fertility, presence and type of vegetation, among others. The studied orchard is a mixed forestry plantation of hybrid walnuts(Juglans × intermedia Carr.) for wood and alders (Alnus cordata (Loisel.) Duby.), a nitrogen fixing specie through the actinomycete Frankia alni ((Woronin, 1866) Von Tubeuf 1895). The study area is sited at Restinclières, a green area near Montpellier (South of France). In the present work, soil respiration varied greatly throughout the year, mainly influenced by soil temperature. Soil water content did not significantly influence the response of soil respiration as it was constant during the measurement period and under no water stress conditions. Distance between nearest walnut and measurement was also a highly influential factor in soil respiration. Generally there was a decreasing trend in soil respiration when the distance to the nearest tree increased. It was also analyzed the response of soil respiration according to alder presence and fertilizer management (50 kg N·ha-1·año-1 from 1999 to 2010). None of these treatments significantly influenced soil respiration, although previous studies noticed an inhibition in rates of soil respiration under fertilized conditions and high rates of available nitrogen. However, treatments without fertilization and without alder presence obtained higher respiration rates in those cases with significant differences. The lack of significant differences between treatments may be due to the high coefficient of variation experienced by soil respiration measurements. Finally an asynchronous fluctuation was observed between soil respiration and litterfall during senescence period. This is possibly due to the slowdown in the emission of exudates by roots during senescence period, which are largely related to microbial activity.

Potencial del cultivo de la chumbera (Opuntia ficus-indica (L) Miller) para la obtención de biocombustibles

El presente trabajo trata sobre el potencial del cultivo de chumbera (Opuntia ficus-indica (L) Miller) para la obtención de dos biocombustibles: bioetanol y biogás. Para lograr este objetivo se ha estudiado, por una parte, el empleo de procedimientos orientados a la producción de bioetanol no celulósico a partir de cladodios de chumbera, lo que ha dado como resultado rendimientos de entre 156 y 221 litros de etanol por cada tonelada de materia seca de biomasa, y, por otra, la obtención de biogás mediante la digestión anaeróbica de los mismos en régimen mesófilo, donde se han hallado rendimientos en torno a 198 m3 de metano por tonelada de materia seca. Una vez determinado el potencial de la materia prima se han diseñado procesos para una escala industrial que permitan la transformación de los cladodios de chumbera en ambos biocombustibles y se han determinado sus balances energéticos, los cuales han dado como resultado la autosuficiencia de ambos procesos, obteniéndose, además, un excedente térmico de 1.235 kcal L-1 de etanol producido, y en torno a 140 kep de energía total (térmica + eléctrica) por tonelada de materia seca empleada en la digestión anaeróbica. Por último se ha estimado el potencial de producción de ambos combustibles en un área apta para el cultivo de la chumbera. En concreto, este estudio se ha llevado a cabo para la provincia de Almería, elegida por tratarse de una zona con cierta tradición en el manejo de esta planta y presentar un clima semiárido mediterráneo. La superficie apta para el cultivo de la chumbera en esta provincia se ha estimado en 100.616 ha y el rendimiento medio del cultivo en 5 t MS ha-1 año-1. En el caso del bioetanol esto implicaría un potencial de producción en torno a 82.158 m3 año-1 que podrían dar lugar a la creación de dos macrodestilerías (con una producción de 100.000 L diarios) o de 49 microdestilerías (con 5.000 L diarios de producción). Si se optara por la transformación de la biomasa de chumbera en metano, podrían obtenerse 99,4 M de metros cúbicos, lo cual permitiría el establecimiento de 79 plantas de cogeneración de 500 kW cada una. ABSTRACT The present work deals with the potential of prickly pear (Opuntia ficus-indica (L) Mill.) biomass as a feedstock for bioethanol and biogas. In order to reach this objective different procedures aiming at the production of non-cellulosic bioethanol from cladodes were carried out; yields from156 to 221 litres of bioethanol per ton of dry matter were found. Mesophilic anaerobic digestion of cladodes was also studied and yields around 198 m3 of methane per ton of dry matter were reached. From these results, processes on an industrial scale were designed for both pathways of energy conversion of prickly-pear biomass and the respective energy balances were calculated. They resulted to be self-sufficient from an energetic point of view; the bioethanol pathway generated a thermal energy surplus of 1,235 kcal per litre of ethanol, while around 140 kep of total energy (heat + electricity) were obtained from the anaerobic digestion of one ton of dry cladodes. Finally, the potential production of both biofuels from prickly pear biomass was estimated for a specific area. The province of Almeria was chosen because of its climate conditions and the previous existence of prickly pear plantations. The area suitable for prickly pear cultivation in the province was estimated at a maximum of 100.616 ha, with an average yield of about 5 t DM ha-1 year-1. If prickly pear biomass were cropped for bioethanol in Almeria, the potential production of bioethanol could reach 82,158 m3 year-1, in either two macrodistilleries (100,000 L day-1) or 49 microdestilleries (5,000 L day-1). If the biogas pathway were preferred, 99. 4 Mm3 of methane could be reached and this would represent 79 CHP plants (500 kW each one).

Estudios de eficiencia en el uso de la luz y estimaciones de biomasa en cultivos energéticos de Salix sp. en Central New York, USA

La productividad es un factor importante que influye en la viabilidad económica de un cultivo energético de sauce y maximizarla se convierte en un tema primordial. Esta investigación está directamente relacionada con dicha característica. La productividad varía según los clones cultivados, que pueden ser mejorados y seleccionados genéticamente. Los programas genéticos requieren de una información previa (productividad media en función del porte y número de los tallos, características de las hojas, resistencia a las plagas, etc.) que ayudará a obtener clones más productivos y resistentes. Por ello, nuestra investigación consta de dos estudios: (1) Evaluación de la eficiencia del uso de la luz o LUE (Light Use Efficiency). El incremento de biomasa y la eficiencia del uso de la luz (LUE) fue estudiado en 15 clones del genero Salix durante los meses de junio a septiembre de 2011 en Belleville (Central New York, USA). Los objetivos de este estudio fueron: (1) Evaluar la eficiencia del uso de la luz en la explicación a la variación en la producción de biomasa y (2) Determinar si existen diferencias significativas entre clones evaluando el índice de área foliar (LAI) y algunos componentes de las hojas (N, P, K,…). Se concluye que la variación de biomasa está relacionada con la cantidad de luz interceptada y con la eficiencia de su uso. Dicha información debe de ser transferida para ayudar a mejorar genéticamente los futuros clones a comercializar, con el fin de maximizar la productividad y aumentar la resistencia a plagas. (2) Estimación de biomasa a través de modelos de regresión. Los estudios de investigación relacionados con la productividad requieren estimaciones no destructivas de la biomasa aérea. Sin embargo, el nivel de precisión requerido y la inversión de tiempo son excesivos para operaciones comerciales con grandes extensiones (plantaciones de 10.000 ha). Por esta razón, se estudia el nivel de especificidad (específico, intermedio y general) en la toma de datos de campo sobre los mismos 15 clones (12 de ellos se pueden agrupar en 5 grupos según su genotipo origen) del genero Salix, empleados en el estudio anterior. Para todos los niveles estudiados se observaron diferencias significativas. Pero desde nuestro punto de vista, las diferencias obtenidas no son relevantes. Para validar los modelos finalmente seleccionados se calcularon los porcentajes de error entre la biomasa estimada por los modelos de regresión calculados y la biomasa real obtenida tras los pesajes de biomasa, todo ello se realizó para cada clon según nivel de especificidad. ABSTRACT Productivity is an important factor in the economic viability of a willow crop´s, therefore, maximize it becomes a major factor. This study is directly related to this feature. Productivity, among other factors, may vary depending on different clones, which can be improved and selected genetically. Genetic programs require prior information (average productivity, size and number of stems, leaf characteristics, resistance to pests, etc.) to help you get more productive clones resistant to local pests. Our research consists of two studies: (1) Evaluation of the efficiency of use of light (LUE, Light Use Efficiency). The increase of biomass and light use efficiency (LUE) was tested on 15 clones of the genus Salix during June and September 2011 in Belleville (Central New York, USA). The objectives of this study were: (1) evaluate the light use efficiency and its relationship with the variation in biomass production and (2) determine whether there are significant differences between clones evaluating the leaf area index (LAI) and some traits of the leaves (N, P, K). We studied the correlation with the light use efficiency. It is concluded that the variation of biomass was related to the amount of light intercepted and its efficiency. Such information must be transferred to help improve future genetically clones to market in order to maximize productivity and increase resistance to pests. (2) Estimation of biomass through regression models. Research studies related to productivity estimates require precision and non destructive biomass. However, the level of accuracy required and the investment of time are excessive for large commercial operations with extensions (plantations of 10,000 ha). Precisely for this reason, we study the level of specificity (specific, intermediate and general) in making field data on the same 15 clones (12 of them can be grouped into five groups according to their genotype origin) of the genus Salix, employees in the previous study. For all levels studied some significant differences were observed. But from our practical standpoint, the differences are not relevant. Finally, to validate the selected models, we calculated the percent of bias between estimated biomass (by the regression models) and real biomass obtained after the weighing of biomass, all this process was done for each clone by level of specificity.

Obtención de clones de alcornoque (Quercus suber L.) mediante embriogénesis somática: aplicación de medios líquidos y biorreactores en la sincronización de los procesos de desarrollo y maduración de los embriones

El alcornoque tiene un gran valor ambiental, como integrante de los ecosistemas forestales mediterráneos, e interés comercial por el valor de la bellota (alimentación del cerdo ibérico), el carbón, la madera y sobre todo por las aplicaciones industriales del corcho. Las posibilidades de mejora genética del alcornoque, como las de otras especies forestales, están limitadas por sus largos ciclos reproductivos y porque su propagación vegetativa mediante estaquillado solo es posible en estados muy juveniles. Por ello este sistema de propagación tiene muy poca, o ninguna, utilidad práctica en la mejora genética. La embriogénesis somática es la vía más apropiada para la clonación de muchas especies forestales y ha hecho posible el desarrollo a gran escala de plantaciones multivarietales de coníferas. En alcornoque es posible la regeneración completa de árboles adultos mediante embriogénesis somática. Con los protocolos actuales (en medio semisólido), los embriones se generan formando acúmulos y en la fase de multiplicación conviven embriones en distintos estados de desarrollo. Es un sistema asincrónico, con baja eficacia para la propagación en masa, que no elimina completamente las dificultades para el desarrollo de programas de mejora genética del alcornoque. En otras especies la utilización de medios líquidos ha mejorado: la sincronización, productividad de los cultivos, el manejo y reducido los costes de producción. Por ello el desarrollo de suspensiones embriogénicas de alcornoque se plantea como una vía para aumentar la eficacia de la propagación clonal a gran escala. En la presente tesis se desarrollan cultivos embriogénicos de alcornoque en medio líquido. El capítulo 3 aborda el establecimiento y mantenimiento de suspensiones, el capítulo 4 el desarrollo de una fase de proliferación en medio líquido y el capítulo 5 la utilización de sistemas de cultivo en medio líquido, estacionarios y de inmersión temporal, como vía para favorecer la maduración de los embriones somáticos. Para iniciar los cultivos en medio líquido se emplearon agregados de embriones tomados de la fase de proliferación en medio semisólido. Cuando estos agregados se inocularon directamente en medio líquido no se logró el establecimiento de las suspensiones. El establecimiento se consiguió empleando como inóculo las células y Resumen pequeños agregados embriogénicos, de tamaño comprendido entre 41 y 800 μm, desprendidas por agitación breve de los agregados de embriones. El mantenimiento se logró inoculando en baja densidad masas embriogénicas compactas de tamaño comprendido entre 0,8 y 1,2 mm. Estas suspensiones, muy heterogéneas, mantuvieron su capacidad de proliferación y de regeneración de embriones al menos durante diez subcultivos consecutivos. El protocolo de iniciación y mantenimiento, desarrollado inicialmente con un solo genotipo, fue eficaz cuando se probó sobre otros 11 genotipos de alcornoque. En la fase de proliferación se ensayaron tres tipos de envase y tres velocidades de agitación. La combinación envase × velocidad determinó el intercambio gaseoso, la disponibilidad de oxígeno y el estrés hidrodinámico. Los agregados embriogénicos de alcornoque crecieron incluso en condiciones de hipoxia no siendo la disponibilidad de oxígeno un factor limitante del crecimiento para tasas de trasferencia de oxígeno comprendidas entre 0,11 h-1 y 1,47 h-1. Por otra parte la producción de biomasa creció con el estrés hidrodinámico para valores de índice de cizalladura inferiores a 5 x 10-3 cm min-1. La mayor producción de biomasa se obtuvo con matraces Erlenmeyer de 100 ml y alta velocidad de agitación (160 rpm) mientras que la diferenciación de embriones se vio favorecida por bajas velocidades de agitación (60 rpm) asociadas con bajas disponibilidades de oxígeno. La posibilidad de madurar embriones de alcornoque en medio líquido se estudió utilizando sistemas de inmersión permanente y sistemas de inmersión temporal. En inmersión permanente no se diferenciaron embriones cotiledonares (posiblemente por hiperhidricidad). Los sistemas de inmersión temporal permitieron obtener embriones maduros en estado cotiledonar y capaces de regenerar plantas in vitro. Concentraciones de sacarosa superiores a 60 g l-1 y frecuencias de inmersión iguales o inferiores a una diaria, tuvieron efectos negativos para el desarrollo de los embriones somáticos. En los sistemas de inmersión temporal los parámetros físico-químicos del medio de cultivo se mantuvieron estables y no se observó ninguna limitación de nutrientes. No obstante, estos sistemas se vieron afectados por la evaporación que generó el flujo de aire necesario para desplazar el líquido en cada periodo de inmersión. Abstract ABSTRACT Cork oak is one of the most important tree species of the Mediterranean ecosystem. Besides its high environmental value has a great economic interest due to the sustainable production of acorns (to feed the Iberian pig) charcoal, timber and cork, which is a renewable natural product with various technological applications. As happens with other forest species, cork oak genetic improvement programs are limited by their long life cycles and because vegetative propagation by cuttings it´s only possible in very juvenile plants. Hence this propagation system is useless or has little practical use for breeding cork oak. Plant regeneration by somatic embryogenesis is the most suitable way for cloning many forest species, and it is the enabling technology which has allowed the establishment of large-scale conifer multi-varietal plantations. Clonal plant regeneration of mature cork oak trees can be achieved through somatic embryogenesis. Somatic embryos at different stages of development and forming clusters are produced during the multiplication phase with current protocols (using semisolid medium). This is an asynchronous low-efficient process not suitable for mass propagation, and therefore it does not solve the difficulties presented by cork oak breeding programs. Culture in liquid medium has been used with other species to improve: synchronization, yield, handling, and to reduce production costs. Thus the development of cork oak embryogenic suspension cultures is envisaged as a way to increase the efficiency of large scale clonal propagation. The thesis herein develops cork oak embryogenic cultures in liquid medium. In chapter 3 establishment and maintenance of suspension cultures are developed, chapter 4 studies proliferation phase in liquid medium and chapter 5 considers the use of different systems of culture in liquid medium, both stationary and temporary immersion, as a way to promote somatic embryos maturation. Clusters of embryos taken from proliferating cultures on semisolid medium were used to initiate the cultures in liquid medium. When these clusters were inoculated directly in liquid medium establishment of suspension cultures was not executed. However using, as initial inoculum, cells and cell aggregates with a size between 41 and 800 μm detached from these clusters of embryos, subjected to a brief shaking, suspension cultures could be established. Suspension maintenance was achieved by inoculating compact embryogenic Abstract clumps with a size between 0.8 and 1.2 mm at low density. The suspension cultures, very heterogeneous, retained both their proliferation and embryo regeneration capacity for at least ten consecutive subcultures. The initiation and maintenance protocol, initially developed with a single genotype, was effective when tested on 11 additional genotypes of cork oak. In proliferation phase three types of vessels and three different levels of agitation were assayed. The combination vessel × orbiting speed determined gas exchange, oxygen availability and hydrodynamic stress. Cork oak embryogenic aggregates grew even under hypoxia conditions; oxygen availability at transfer rates between 0.11 and 1.47 h-1 was not a limiting factor for growth. Furthermore the biomass production was increased with hydrodynamic stress when shear rate values were of less than 5 x 10-3 cm min-1. The highest biomass production was obtained with 100 ml Erlenmeyer flask and high stirring speed (160 rpm) while the differentiation of embryos was favored by low agitation speeds (60 rpm) associated with low oxygen availability. The possibility to mature cork oak somatic embryos in liquid medium was studied using both permanent immersion systems and temporary immersion systems. Cotyledonary embryos did not differentiate in permanent immersion conditions (probably due to hyperhydricity). Temporary immersion systems allowed obtaining mature cotyledonary embryos, which were able to regenerate plants in vitro. Sucrose concentrations above 60 g l-1 and immersion frequencies equal to or lower than one each 24 h had negative effects on somatic embryo development. Physicochemical parameters of the culture medium in temporary immersion systems were stable and showed no limitation of nutrients. However, these systems were affected by the evaporation generated by the airflow necessary to relocate the medium at each immersion period.

Land cover dynamics and climate change implications on water resources in South Pacific Costa Rica

Water is fundamental to human life and the availability of freshwater is often a constraint on human welfare and economic development. Consequently, the potential effects of global changes on hydrology and water resources are considered among the most severe and vital ones. Water scarcity is one of the main problems in the rural communities of Central America, as a result of an important degradation of catchment areas and the over-exploitation of aquifers. The present Thesis is focused on two critical aspects of global changes over water resources: (1) the potential effects of climate change on water quantity and (2) the impacts of land cover and land use changes on the hydrological processes and water cycle. Costa Rica is among the few developing countries that have recently achieved a land use transition with a net increase in forest cover. Osa Region in South Pacific Costa Rica is an appealing study site to assess water supply management plans and to measure the effects of deforestation, forest transitions and climate change projections reported in the region. Rural Community Water Supply systems (ASADAS) in Osa are dealing with an increasing demand of freshwater due to the growing population and the change in the way of life in the rural livelihoods. Land cover mosaics which have resulted from the above mentioned processes are characterized by the abandonment of marginal farmland with the spread over these former grasslands of high return crops and the expansion of secondary forests due to reforestation initiatives. These land use changes have a significant impact on runoff generation in priority water-supply catchments in the humid tropics, as evidenced by the analysis of the Tinoco Experimental Catchment in the Southern Pacific area of Costa Rica. The monitoring system assesses the effects of the different land uses on the runoff responses and on the general water cycle of the basin. Runoff responses at plot scale are analyzed for secondary forests, oil palm plantations, forest plantations and grasslands. The Oil palm plantation plot presented the highest runoff coefficient (mean RC=32.6%), twice that measured under grasslands (mean RC=15.3%) and 20-fold greater than in secondary forest (mean RC=1.7%). A Thornthwaite-type water balance is proposed to assess the impact of land cover and climate change scenarios over water availability for rural communities in Osa Region. Climate change projections were obtained by the downscaling of BCM2, CNCM3 and ECHAM5 models. Precipitation and temperature were averaged and conveyed by the A1B, A2 and B1 IPCC climate scenario for 2030, 2060 and 2080. Precipitation simulations exhibit a positive increase during the dry season for the three scenarios and a decrease during the rainy season, with the highest magnitude (up to 25%) by the end of the 21st century under scenario B1. Monthly mean temperature simulations increase for the three scenarios throughout the year with a maximum increase during the dry season of 5% under A1B and A2 scenarios and 4% under B1 scenario. The Thornthwaite-type Water Balance model indicates important decreases of water surplus for the three climate scenarios during the rainy season, with a maximum decrease on May, which under A1B scenario drop up to 20%, under A2 up to 40% and under B1 scenario drop up to almost 60%. Land cover scenarios were created taking into account current land cover dynamics of the region. Land cover scenario 1 projects a deforestation situation, with forests decreasing up to 15% due to urbanization of the upper catchment areas; land cover scenario 2 projects a forest recovery situation where forested areas increase due to grassland abandonment on areas with more than 30% of slope. Deforestation scenario projects an annual water surplus decrease of 15% while the reforestation scenario projects a water surplus increase of almost 25%. This water balance analysis indicates that climate scenarios are equal contributors as land cover scenarios to future water resource estimations.

Assessing forest response-type diversity to natural disturbances in Peninsular Spain and the Balearic Islands = Evaluación de la diversidad de tipos de respuesta a perturbaciones naturales en la España peninsular e Islas Baleares

Disturbances shape forest ecosystems by influencing their composition, structure, and processes. In the Mediterranean Basin, changes in the disturbance regimes have been predicted to occur in the next future with a higher occurrence of extreme events of drought, wildfire, and – to a lesser extent – windstorm. Woody species are the main elements defining the structure and functioning of forest ecosystems. Recently, response-type diversity has been pointed out as an appropriate indicator of ecosystems resilience. For this, we have elaborated a complete response-trait database for the tree and shrubby species considered in the Third Spanish National Forest Inventory (3SNFI). In the database, the presence or absence of nine response traits associated to drought, fire, and wind were assigned to each species. The database reflected the lack of information about some important traits (in particular for shrubby species) and allowed to determine those traits most widely distributed. The information contained in the database was then used to assess a relative index of forest resilience to these disturbances calculated from the abundance of response traits and the species redundancy for each plot of the 3SNFI; considering both tree and shrubby species. In general, few plots showed high values of the resilience index, probably because some traits were scarcely presented in the species and also because most plots presented very few species. The cartographic representation of the index showed low values for the stands located in mountainous ranges, which are mostly composed by species typical from central Europe. In the other side, Eucalyptus plantations in Galicia appeared as one thee the most resilient ecosystems, due to its higher adaptive capacity to persist after the occurrence of drought, fire, and windstorm events. We conclude that the response traits database can constitute a useful tool for forest management and planning and for future research to enhance the forest resilience.

Improved walnut mass micropropagation through the combined use of phloroglucinol and FeEDDHA

Despite the socioeconomic importance of walnut trees, poor rooting and recalcitrance to in vitro culture have hampered the establishment of high-yield clonal plantations. To improve walnut micropropagation, we introduced several modifications to current methods and evaluated the effects on microshoot performance and acclimatization. Nine selected genotypes (13-year-old trees) of the commercial hybrid Juglans major 209 x J. regia were cultured in vitro on DKW-C medium supplemented with 4.4 µM BA and 50 µM IBA. A protocol was developed that relies on the use of 0.40 mM phloroglucinol during shoot multiplication, 0.20 mM previous root induction, and 6.81 mg/L Fe3+ (FeEDDHA). Moreover, the addition of 83.2 µM glucose during the root expression phase significantly improved plant survival during acclimatization. Phloroglucinol promoted microshoot elongation but inhibited rooting, especially at concentrations above 0.40 mM. Replacing FeEDTA by FeEDDHA diminished chlorotic symptoms and improved rooting, with up to 90% microshoots developing viable roots. Likewise, glucose was more efficient than sucrose or fructose in promoting plant survival. At the proposed working concentrations, neither glucose nor FeEDDHA caused any noticeable deleterious effect on walnut micropropagation. Microscopic analysis revealed the physical continuity between adventitious roots and stem pericycles. Analysis of leaf genomic DNA with eight polymorphic microsatellite markers was supportive of the clonal fidelity and genetic stability of the micropropagated material. Successful clonal plantations (over 5,800 ramets) have been established by applying this protocol.

Functional response of Ulmus minor Mill. to drought, flooding and dutch elm disease

Ulmus minor es una especie arbórea originaria de Europa cuyas poblaciones han sido diezmadas por el hongo patógeno causante de la enfermedad de la grafiosis. La conservación de los olmos exige plantearse su propagación a través de plantaciones y conocer mejor su ecología y biología. Ulmus minor es un árbol de ribera, pero frecuentemente se encuentra alejado del cauce de arroyos y ríos, donde la capa freática sufre fuertes oscilaciones. Por ello, nuestra hipótesis general es que esta especie es moderadamente resistente tanto a la inundación como a la sequía. El principal objetivo de esta tesis doctoral es entender desde un punto de vista funcional la respuesta de U. minor a la inundación, la sequía y la infección por O. novo-ulmi; los factores que posiblemente más influyen en la distribución actual de U. minor. Con este objetivo se persigue dar continuidad a los esfuerzos de conservación de esta especie que desde hace años se dedican en varios centros de investigación a nivel mundial, ya que, entender mejor los mecanismos que contribuyen a la resistencia de U. minor ante la inoculación con O. novo-ulmi y factores de estrés abiótico ayudará en la selección y propagación de genotipos resistentes a la grafiosis. Se han planteado tres experimentos en este sentido. Primero, se ha comparado la tolerancia de brinzales de U. minor y U. laevis – otro olmo ibérico – a una inmersión controlada con el fin de evaluar su tolerancia a la inundación y comprender los mecanismos de aclimatación. Segundo, se ha comparado la tolerancia de brinzales de U. minor y Quercus ilex – una especie típica de ambientes Mediterránea secos – a la falta de agua en el suelo con el fin de evaluar el grado de tolerancia y los mecanismos de aclimatación a la sequía. El hecho de comparar dos especies contrastadas responde al interés en entender mejor cuales son los procesos que conducen a la muerte de una planta en condiciones de sequía – asunto sobre el que hay una interesante discusión desde hace algunos años. En tercer lugar, con el fin de entender mejor la resistencia de algunos genotipos de U. minor a la grafiosis, se han estudiado las diferencias fisiológicas y químicas constitutivas e inducidas por O. novo-ulmi entre clones de U. minor seleccionados a priori por su variable grado de resistencia a esta enfermedad. En el primer experimento se observó que los brinzales de U. minor sobrevivieron 60 días inmersos en una piscina con agua no estancada hasta una altura de 2-3 cm por encima del cuello de la raíz. A los 60 días, los brinzales de U. laevis se sacaron de la piscina y, a lo largo de las siguientes semanas, fueron capaces de recuperar las funciones fisiológicas que habían sido alteradas anteriormente. La conductividad hidráulica de las raíces y la tasa de asimilación de CO2 neta disminuyeron en ambas especies. Por el contrario, la tasa de respiración de hojas, tallos y raíces aumentó en las primeras semanas de la inundación, posiblemente en relación al aumento de energía necesario para desarrollar mecanismos de aclimatación a la inundación, como la hipertrofia de las lenticelas que se observó en ambas especies. Por ello, el desequilibrio del balance de carbono de la planta podría ser un factor relevante en la mortalidad de las plantas ante inundaciones prolongadas. Las plantas de U. minor (cultivadas en envases de 16 litros a media sombra) sobrevivieron por un prolongado periodo de tiempo en verano sin riego; la mitad de las plantas murieron tras 90 días sin riego. El cierre de los estomas y la pérdida de hojas contribuyeron a ralentizar las pérdidas de agua y tolerar la sequía en U. minor. Las obvias diferencias en tolerancia a la sequía con respecto a Q. ilex se reflejaron en la distinta capacidad para ralentizar la aparición del estrés hídrico tras dejar de regar y para transportar agua en condiciones de elevada tensión en el xilema. Más relevante es que las plantas con evidentes síntomas de decaimiento previo a su muerte exhibieron pérdidas de conductividad hidráulica en las raíces del 80% en ambas especies, mientras que las reservas de carbohidratos apenas variaron y lo hicieron de forma desigual en ambas especies. Árboles de U. minor de 5 y 6 años de edad (plantados en eras con riego mantenido) exhibieron una respuesta a la inoculación con O. novo-ulmi consistente con ensayos previos de resistencia. La conductividad hidráulica del tallo, el potencial hídrico foliar y la tasa de asimilación de CO2 neta disminuyeron significativamente en relación a árboles inoculados con agua, pero solo en los clones susceptibles. Este hecho enlaza con el perfil químico “más defensivo” de los clones resistentes, es decir, con los mayores niveles de suberina, ácidos grasos y compuestos fenólicos en estos clones que en los susceptibles. Ello podría restringir la propagación del hongo en el árbol y preservar el comportamiento fisiológico de los clones resistentes al inocularlos con el patógeno. Los datos indican una respuesta fisiológica común de U. minor a la inundación, la sequía y la infección por O. novo-ulmi: pérdida de conductividad hidráulica, estrés hídrico y pérdida de ganancia neta de carbono. Pese a ello, U. minor desarrolla varios mecanismos que le confieren una capacidad moderada para vivir en suelos temporalmente anegados o secos. Por otro lado, el perfil químico es un factor relevante en la resistencia de ciertos genotipos a la grafiosis. Futuros estudios deberían examinar como este perfil químico y la resistencia a la grafiosis se ven alteradas por el estrés abiótico. ABSTRACT Ulmus minor is a native European elm species whose populations have been decimated by the Dutch elm disease (DED). An active conservation of this species requires large-scale plantations and a better understanding of its biology and ecology. U. minor generally grows close to water channels. However, of the Iberian riparian tree species, U. minor is the one that spread farther away from rivers and streams. For these reasons, we hypothesize that this species is moderately tolerant to both flooding and drought stresses. The main aim of the present PhD thesis is to better understand the functional response of U. minor to the abiotic stresses – flooding and drought – and the biotic stress – DED – that can be most influential on its distribution. The overarching goal is to aid in the conservation of this emblematic species through a better understanding of the mechanisms that contribute to resistance to abiotic and biotic stresses; an information that can help in the selection of resistant genotypes and their expansion in large-scale plantations. To this end, three experiments were set up. First, we compared the tolerance to experimental immersion between seedlings of U. minor and U. laevis – another European riparian elm species – in order to assess their degree of tolerance and understand the mechanisms of acclimation to this stress. Second, we investigated the tolerance to drought of U. minor seedlings in comparison with Quercus ilex (an oak species typical of dry Mediterranean habitats). Besides assessing and understanding U. minor tolerance to drought at the seedling stage, the aim was to shed light into the functional alterations that trigger drought-induced plant mortality – a matter of controversy in the last years. Third, we studied constitutive and induced physiological and biochemical differences among clones of variable DED resistance, before and following inoculation with Ophiostoma novo-ulmi. The goal is to shed light into the factors of DED resistance that is evident in some genotypes of U. minor, but not others. Potted seedlings of U. minor survived for 60 days immersed in a pool with running water to approximately 2-3 cm above the stem collar. By this time, U. minor seedlings died, whereas U. laevis seedlings moved out of the pool were able to recover most physiological functions that had been altered by flooding. For example, root hydraulic conductivity and leaf photosynthetic CO2 uptake decreased in both species; while respiration initially increased with flooding in leaves, stems and roots possibly to respond to energy demands associated to mechanisms of acclimation to soil oxygen deficiency; as example, a remarkable hypertrophy of lenticels was soon observed in flooded seedlings of both species. Therefore, the inability to maintain a positive carbon balance somehow compromises seedling survival under flooding, earlier in U. minor than U. laevis, partly explaining their differential habitats. Potted seedlings of U. minor survived for a remarkable long time without irrigation – half of plants dying only after 90 days of no irrigation in conditions of high vapour pressure deficit typical of summer. Some mechanisms that contributed to tolerate drought were leaf shedding and stomata closure, which reduced water loss and the risk of xylem cavitation. Obviously, U. minor was less tolerant to drought than Q. ilex, differences in drought tolerance resulting mostly from the distinct capacity to postpone water stress and conduct water under high xylem tension among species. More relevant was that plants of both species exhibited similar symptoms of root hydraulic failure (i.e. approximately 80% loss of hydraulic conductivity), but a slight and variable depletion of non-structural carbohydrate reserves preceding dieback. Five- and six-year-old trees of U. minor (planted in the field with supplementary watering) belonging to clones of contrasted susceptibility to DED exhibited a different physiological response to inoculation with O. novo-ulmi. Stem hydraulic conductivity, leaf water potential and photosynthetic CO2 uptake decreased significantly relative to control trees inoculated with water only in DED susceptible clones. This is consistent with the “more defensive” chemical profile observed in resistant clones, i.e. with higher levels of saturated hydrocarbons (suberin and fatty acids) and phenolic compounds than in susceptible clones. These compounds could restrict the spread of O. novo-ulmi and contribute to preserving the near-normal physiological function of resistant trees when exposed to the pathogen. These results evidence common physiological responses of U. minor to flooding, drought and pathogen infection leading to xylem water disruption, leaf water stress and reduced net carbon gain. Still, seedlings of U. minor develop various mechanisms of acclimation to abiotic stresses that can play a role in surviving moderate periods of flood and drought. The chemical profile appears to be an important factor for the resistance of some genotypes of U. minor to DED. How abiotic stresses such as flooding and drought affect the capacity of resistant U. minor clones to face O. novo-ulmi is a key question that must be contemplated in future research.