ExperNet: An Intelligent Multiagent System for WAN Management

This paper describes ExperNet, an intelligent multi-agent system that was developed under an EU funded project to assist in the management of a large-scale data network. ExperNet assists network operators at various nodes of a WAN to detect and diagnose hardware failures and network traffic problems and suggests the most feasible solution, through a web-based interface. ExperNet is composed by intelligent agents, capable of both local problem solving and social interaction among them for coordinating problem diagnosis and repair. The current network state is captured and maintained by conventional network management and monitoring software components, which have been smoothly integrated into the system through sophisticated information exchange interfaces. For the implementation of the agents, a distributed Prolog system enhanced with networking facilities was developed. The agents’ knowledge base is developed in an extensible and reactive knowledge base system capable of handling multiple types of knowledge representation. ExperNet has been developed, installed and tested successfully in an experimental network zone of Ukraine.

Novel Negotiation protocol to support CDM process in a layered ATM System

In the SESAR Step 2 concept of operations a RBT is available and seen by all making it possible to conceive a different operating method than the current ATM system based on Collaborative Decisions Making processes. Currently there is a need to describe in more detail the mechanisms by which actors (ATC, Network Management, Flight Crew, airports and Airline Operation Centre) will negotiate revisions to the RBT. This paper introduces a negotiation model, which uses constraint based programing applied to a mediator to facilitate negotiation process in a SWIM enabled environment. Three processes for modelling the negotiation process are explained as well a preliminary reasoning agent algorithm modelled with constraint satisfaction problem is presented. Computational capability of the model is evaluated in the conclusion.

Sistema de gestión de infraestructuras de telecomunicaciones

Las infraestructuras de telecomunicaciones son las que forman la capa física para la transmisión de la información de la que se componen las comunicaciones. Según el modelo OSI la capa física se encarga de convertir la trama que recibe (del nivel de enlace) en una serie de bits que envía a través del medio de transmisión correspondiente hacia el sistema destino, liberando a la capa superior de las funciones que imponga la naturaleza particular del medio de transmisión que se utilice. Para ello define las características mecánicas, eléctricas y funcionales de la interconexión al medio físico estableciendo además una interfaz con su capa superior (el nivel de enlace). Dependiendo del medio y el modo de transmisión así como de la topología de la red, el tipo de codificación y configuración de la línea y el tipo de comunicación deseada se requiere de un equipamiento u otro, por lo que la infraestructura de comunicaciones cambia. La complejidad de las redes de comunicaciones (multitud de servicios a multitud de destinos) hace que la gestión de la capa física (o de infraestructura) de las comunicaciones sea un reto difícil para los gestores de las telecomunicaciones en las empresas u organismos públicos. Ya que conseguir una correcta administración de las infraestructuras de telecomunicaciones es un factor clave para garantizar la calidad del servicio, optimizar los tiempos de provisión a los clientes y minimizar la indisponibilidad de la red ante incidencias. Si bien existen diferentes herramientas para la gestión de las telecomunicaciones la mayoría de estas soluciones contempla de manera limitada la capa física, dejando a los gestores con una multitud de aproximaciones, más o menos manuales, para entender y conocer qué pasa en su red a nivel físico y lo que puede ser aún más grave, sin la capacidad de reacción rápida ante la aparición de una incidencia. Para resolver este problema se hace necesaria la capacidad de gestión extremo a extremo de los circuitos y de todas sus conexiones intermedias. Esto es, se necesita implantar una metodología que modele la red de comunicaciones de manera que se pueda representar en un sistema informático y sobre él facilitar la gestión de los circuitos físicos y de sus infraestructuras asociadas. Por ello, la primera parte del proyecto consistirá en la descripción del tipo de infraestructura de telecomunicaciones a gestionar, el estudio de las soluciones actuales de gestión de red y el análisis de las estrategias que se están considerando para permitir la gestión de la capa física. La segunda parte estará dedicada a la definición de una metodología para la representación de la capa física en un sistema informático, de manera que se proporcione una solución completa a las organizaciones para la gestión eficaz de su infraestructura de telecomunicaciones. Y la tercera parte se centrará en la realización de un ejemplo real (piloto) de implantación de esta metodología para un proyecto concreto de una red de comunicaciones. Con objeto de mostrar las prestaciones de la solución propuesta. ABSTRACT. Telecommunications infrastructures have the physical layer component for the transfer of data. As defined in OSI model the physical layer performs the conversion of data received to binary digits which are sent through the transmission devices towards the target system, thus freeing the top layer from defining the functional specifics of each device used. This requires the full definition of the mechanical, electrical and functional features within the physical environment and the implementation of an interface with the top layer. Dependencies on the environment and the transmission modes as well as the network’s topology, the type of protocol and the line’s configuration and the type of communication selected provide specific requirements which define the equipment needed. This may also require changes in the communications environment. Current networks’ complexity (many different types of services to many nodes) demand an efficient management of the physical layer and the infrastructure in enterprises and the public sector agencies thus becoming a challenging task to the responsible for administering the telecommunications infrastructure which is key to provide high quality of service with the need to avoid any disruption of service. We have in the market different tools supporting telecommunications management but most of these solutions have limited functionality for the physical layer, leaving to administrators with the burden of executing manual tasks which need to be performed in order to attain the desired level of control which facilitates the decision process when incidents occur. An adequate solution requires an end to end capacity management of the circuits and all intermediate connections. We must implement a methodology to model the communications network to be able of representing an entire IT system to manage circuitry and associated infrastructure components. For the above purpose, the first part of the Project includes a complete description of the type of communications infrastructure to manage, the study of the current solutions available in network management and an analysis of the strategies in scope for managing the physical layer. The second part is dedicated to the definition of a methodology for the presentation of the physical layer in an IT system with the objective of providing a complete solution to the responsible staffs for efficiently managing a telecommunications infrastructure. The third part focuses on the deployment of a pilot using this methodology in a specific project performed on a communications network. Purpose is to show the deliverables of the proposed solution.

Monitorización inteligente de redes de comunicación

El avance tecnológico de los últimos años ha aumentado la necesidad de guardar enormes cantidades de datos de forma masiva, llegando a una situación de desorden en el proceso de almacenamiento de datos, a su desactualización y a complicar su análisis. Esta situación causó un gran interés para las organizaciones en la búsqueda de un enfoque para obtener información relevante de estos grandes almacenes de datos. Surge así lo que se define como inteligencia de negocio, un conjunto de herramientas, procedimientos y estrategias para llevar a cabo la “extracción de conocimiento”, término con el que se refiere comúnmente a la extracción de información útil para la propia organización. Concretamente en este proyecto, se ha utilizado el enfoque Knowledge Discovery in Databases (KDD), que permite lograr la identificación de patrones y un manejo eficiente de las anomalías que puedan aparecer en una red de comunicaciones. Este enfoque comprende desde la selección de los datos primarios hasta su análisis final para la determinación de patrones. El núcleo de todo el enfoque KDD es la minería de datos, que contiene la tecnología necesaria para la identificación de los patrones mencionados y la extracción de conocimiento. Para ello, se utilizará la herramienta RapidMiner en su versión libre y gratuita, debido a que es más completa y de manejo más sencillo que otras herramientas como KNIME o WEKA. La gestión de una red engloba todo el proceso de despliegue y mantenimiento. Es en este procedimiento donde se recogen y monitorizan todas las anomalías ocasionadas en la red, las cuales pueden almacenarse en un repositorio. El objetivo de este proyecto es realizar un planteamiento teórico y varios experimentos que permitan identificar patrones en registros de anomalías de red. Se ha estudiado el repositorio de MAWI Lab, en el que se han almacenado anomalías diarias. Se trata de buscar indicios característicos anuales detectando patrones. Los diferentes experimentos y procedimientos de este estudio pretenden demostrar la utilidad de la inteligencia de negocio a la hora de extraer información a partir de un almacén de datos masivo, para su posterior análisis o futuros estudios. ABSTRACT. The technological progresses in the recent years required to store a big amount of information in repositories. This information is often in disorder, outdated and needs a complex analysis. This situation has caused a relevant interest in investigating methodologies to obtain important information from these huge data stores. Business intelligence was born as a set of tools, procedures and strategies to implement the "knowledge extraction". Specifically in this project, Knowledge Discovery in Databases (KDD) approach has been used. KDD is one of the most important processes of business intelligence to achieve the identification of patterns and the efficient management of the anomalies in a communications network. This approach includes all necessary stages from the selection of the raw data until the analysis to determine the patterns. The core process of the whole KDD approach is the Data Mining process, which analyzes the information needed to identify the patterns and to extract the knowledge. In this project we use the RapidMiner tool to carry out the Data Mining process, because this tool has more features and is easier to use than other tools like WEKA or KNIME. Network management includes the deployment, supervision and maintenance tasks. Network management process is where all anomalies are collected, monitored, and can be stored in a repository. The goal of this project is to construct a theoretical approach, to implement a prototype and to carry out several experiments that allow identifying patterns in some anomalies records. MAWI Lab repository has been selected to be studied, which contains daily anomalies. The different experiments show the utility of the business intelligence to extract information from big data warehouse.

Application of Agent Technology for Fault Diagnosis of Telecommunication Networks

La presente tesis doctoral contribuye al problema del diagnóstico autonómico de fallos en redes de telecomunicación. En las redes de telecomunicación actuales, las operadoras realizan tareas de diagnóstico de forma manual. Dichas operaciones deben ser llevadas a cabo por ingenieros altamente cualificados que cada vez tienen más dificultades a la hora de gestionar debidamente el crecimiento exponencial de la red tanto en tamaño, complejidad y heterogeneidad. Además, el advenimiento del Internet del Futuro hace que la demanda de sistemas que simplifiquen y automaticen la gestión de las redes de telecomunicación se haya incrementado en los últimos años. Para extraer el conocimiento necesario para desarrollar las soluciones propuestas y facilitar su adopción por los operadores de red, se propone una metodología de pruebas de aceptación para sistemas multi-agente enfocada en simplificar la comunicación entre los diferentes grupos de trabajo involucrados en todo proyecto de desarrollo software: clientes y desarrolladores. Para contribuir a la solución del problema del diagnóstico autonómico de fallos, se propone una arquitectura de agente capaz de diagnosticar fallos en redes de telecomunicación de manera autónoma. Dicha arquitectura extiende el modelo de agente Belief-Desire- Intention (BDI) con diferentes modelos de diagnóstico que gestionan las diferentes sub-tareas del proceso. La arquitectura propuesta combina diferentes técnicas de razonamiento para alcanzar su propósito gracias a un modelo estructural de la red, que usa razonamiento basado en ontologías, y un modelo causal de fallos, que usa razonamiento Bayesiano para gestionar debidamente la incertidumbre del proceso de diagnóstico. Para asegurar la adecuación de la arquitectura propuesta en situaciones de gran complejidad y heterogeneidad, se propone un marco de argumentación que permite diagnosticar a agentes que estén ejecutando en dominios federados. Para la aplicación de este marco en un sistema multi-agente, se propone un protocolo de coordinación en el que los agentes dialogan hasta alcanzar una conclusión para un caso de diagnóstico concreto. Como trabajos futuros, se consideran la extensión de la arquitectura para abordar otros problemas de gestión como el auto-descubrimiento o la auto-optimización, el uso de técnicas de reputación dentro del marco de argumentación para mejorar la extensibilidad del sistema de diagnóstico en entornos federados y la aplicación de las arquitecturas propuestas en las arquitecturas de red emergentes, como SDN, que ofrecen mayor capacidad de interacción con la red. ABSTRACT This PhD thesis contributes to the problem of autonomic fault diagnosis of telecommunication networks. Nowadays, in telecommunication networks, operators perform manual diagnosis tasks. Those operations must be carried out by high skilled network engineers which have increasing difficulties to properly manage the growing of those networks, both in size, complexity and heterogeneity. Moreover, the advent of the Future Internet makes the demand of solutions which simplifies and automates the telecommunication network management has been increased in recent years. To collect the domain knowledge required to developed the proposed solutions and to simplify its adoption by the operators, an agile testing methodology is defined for multiagent systems. This methodology is focused on the communication gap between the different work groups involved in any software development project, stakeholders and developers. To contribute to overcoming the problem of autonomic fault diagnosis, an agent architecture for fault diagnosis of telecommunication networks is defined. That architecture extends the Belief-Desire-Intention (BDI) agent model with different diagnostic models which handle the different subtasks of the process. The proposed architecture combines different reasoning techniques to achieve its objective using a structural model of the network, which uses ontology-based reasoning, and a causal model, which uses Bayesian reasoning to properly handle the uncertainty of the diagnosis process. To ensure the suitability of the proposed architecture in complex and heterogeneous environments, an argumentation framework is defined. This framework allows agents to perform fault diagnosis in federated domains. To apply this framework in a multi-agent system, a coordination protocol is defined. This protocol is used by agents to dialogue until a reliable conclusion for a specific diagnosis case is reached. Future work comprises the further extension of the agent architecture to approach other managements problems, such as self-discovery or self-optimisation; the application of reputation techniques in the argumentation framework to improve the extensibility of the diagnostic system in federated domains; and the application of the proposed agent architecture in emergent networking architectures, such as SDN, which offers new capabilities of control for the network.

Heterogeneous Collaborative Sensor Network for Electrical Management of an Automated House with PV Energy

In this paper we present a heterogeneous collaborative sensor network for electrical management in the residential sector. Improving demand-side management is very important in distributed energy generation applications. Sensing and control are the foundations of the “Smart Grid” which is the future of large-scale energy management. The system presented in this paper has been developed on a self-sufficient solar house called “MagicBox” equipped with grid connection, PV generation, lead-acid batteries, controllable appliances and smart metering. Therefore, there is a large number of energy variables to be monitored that allow us to precisely manage the energy performance of the house by means of collaborative sensors. The experimental results, performed on a real house, demonstrate the feasibility of the proposed collaborative system to reduce the consumption of electrical power and to increase energy efficiency.

Energy- and environmentally efficient road management: The case of the Spanish motorway network

Transport is responsible for 41% of CO2 emissions in Spain, and around 65% of that figure is due to road traffic. Tolled motorways are currently managed according to economic criteria: minimizing operational costs and maximizing revenues from tolls. Within this framework, this paper develops a new methodology for managing motorways based on a target of maximum energy efficiency. It includes technological and demand-driven policies, which are applied to two case studies. Various conclusions emerge from this study. One is, that the use of intelligent payment systems is recommended; and another, is that the most sustainable policy would involve defining the most efficient strategy for each motorway section, including the maximum use of its capacity, the toll level which attracts the most vehicles, and the optimum speed limit for each type of vehicle.

Neural network controller for active demand side management with PV energy in the residential sector

In this paper, we describe the development of a control system for Demand-Side Management in the residential sector with Distributed Generation. The electrical system under study incorporates local PV energy generation, an electricity storage system, connection to the grid and a home automation system. The distributed control system is composed of two modules: a scheduler and a coordinator, both implemented with neural networks. The control system enhances the local energy performance, scheduling the tasks demanded by the user and maximizing the use of local generation.

Knowledge Modelling in Multiagent Systems: The Case of the Management of a National Network

This paper presents the knowledge model of a distributed decision support system, that has been designed for the management of a national network in Ukraine. It shows how advanced Artificial Intelligence techniques (multiagent systems and knowledge modelling) have been applied to solve this real-world decision support problem: on the one hand its distributed nature, implied by different loci of decision-making at the network nodes, suggested to apply a multiagent solution; on the other, due to the complexity of problem-solving for local network administration, it was useful to apply knowledge modelling techniques, in order to structure the different knowledge types and reasoning processes involved. The paper sets out from a description of our particular management problem. Subsequently, our agent model is described, pointing out the local problem-solving and coordination knowledge models. Finally, the dynamics of the approach is illustrated by an example.

An Intelligent Assistant for Public Transport Management

This paper describes the architecture of a computer system conceived as an intelligent assistant for public transport management. The goal of the system is to help operators of a control center in making strategic decisions about how to solve problems of a fleet of buses in an urban network. The system uses artificial intelligence techniques to simulate the decision processes. In particular, a complex knowledge model has been designed by using advanced knowledge engineering methods that integrates three main tasks: diagnosis, prediction and planning. Finally, the paper describes two particular applications developed following this architecture for the cities of Torino (Italy) and Vitoria (Spain).

Sustainable Air Traffic Management System Development Methodology

As it is defined in ATM 2000+ Strategy (Eurocontrol 2001), the mission of the Air Traffic Management (ATM) System is: “For all the phases of a flight, the ATM system should facilitate a safe, efficient, and expedite traffic flow, through the provision of adaptable ATM services that can be dimensioned in relation to the requirements of all the users and areas of the European air space. The ATM services should comply with the demand, be compatible, operate under uniform principles, respect the environment and satisfy the national security requirements.” The objective of this paper is to present a methodology designed to evaluate the status of the ATM system in terms of the relationship between the offered capacity and traffic demand, identifying weakness areas and proposing solutions. The first part of the methodology relates to the characterization and evaluation of the current system, while a second part proposes an approach to analyze the possible development limit. As part of the work, general criteria are established to define the framework in which the analysis and diagnostic methodology presented is placed. They are: the use of Air Traffic Control (ATC) sectors as analysis unit, the presence of network effects, the tactical focus, the relative character of the analysis, objectivity and a high level assessment that allows assumptions on the human and Communications, Navigation and Surveillance (CNS) elements, considered as the typical high density air traffic resources. The steps followed by the methodology start with the definition of indicators and metrics, like the nominal criticality or the nominal efficiency of a sector; scenario characterization where the necessary data is collected; network effects analysis to study the relations among the constitutive elements of the ATC system; diagnostic by means of the “System Status Diagram”; analytical study of the ATC system development limit; and finally, formulation of conclusions and proposal for improvement. This methodology was employed by Aena (Spanish Airports Manager and Air Navigation Service Provider) and INECO (Spanish Transport Engineering Company) in the analysis of the Spanish ATM System in the frame of the Spanish airspace capacity sustainability program, although it could be applied elsewhere.

Open multi-technology building energy management system

Energy Efficiency is one of the goals of the Smart Building initiatives. This paper presents an Open Energy Management System which consists of an ontology-based multi-technology platform and a wireless transducer network using 6LoWPAN communication technology. The system allows the integration of several building automation protocols and eases the development of different kind of services to make use of them. The system has been implemented and tested in the Energy Efficiency Research Facility at CeDInt-UPM.

BatNet: a 6LoWPAN-based sensors and actuators network

Improving energy efficiency in buildings is one of the goals of the Smart City initiatives and a challenge for the European Union. This paper presents a 6LoWPAN wireless transducer network (BatNet) as part of an open energy management system. This network has been designed to operate in buildings, to collect environmental information (temperature, humidity, illumination and presence) and electrical consumption in real time (voltage, current and power factor). The system has been implemented and tested in the Energy Efficiency Research Facility at CeDInt-UPM.

Air pollution data classification by SOM Neural Network

Over the last ten years, Salamanca has been considered among the most polluted cities in México. This paper presents a Self-Organizing Maps (SOM) Neural Network application to classify pollution data and automatize the air pollution level determination for Sulphur Dioxide (SO2) in Salamanca. Meteorological parameters are well known to be important factors contributing to air quality estimation and prediction. In order to observe the behavior and clarify the influence of wind parameters on the SO2 concentrations a SOM Neural Network have been implemented along a year. The main advantages of the SOM is that it allows to integrate data from different sensors and provide readily interpretation results. Especially, it is powerful mapping and classification tool, which others information in an easier way and facilitates the task of establishing an order of priority between the distinguished groups of concentrations depending on their need for further research or remediation actions in subsequent management steps. The results show a significative correlation between pollutant concentrations and some environmental variables.

Bat-MP: An Ontology-Based Energy Management Platform

This paper presents an Ontology-Based multi-technology platform as part of an open energy management system which also comprises a wireless transducer network for control and monitoring. The platform allows the integration of several building automation protocols, eases the development and implementation of different kinds of services and allows sharing of the data of a building. The system has been implemented and tested in the Energy Efficiency Research Facility at CeDInt-UPM.