Effects of a bifenthrin-treated net on the natural enemies Aphidius colemani (Haliday) and Adalia bipunctata L. in a cucumber crop in Central Spain. Semi-field experiments

Pest management practices that rely on pesticides are growing increasingly less effective and environmentally inappropriate in many cases and the search of alternatives is under focus nowadays. Exclusion of pests from the crop by means of pesticide-treated screens can be an eco-friendly method to protect crops, especially if pests are vectors of important diseases. The mesh size of nets is crucial to determine if insects can eventually cross the barrier or exclude them because there is a great variation in insect size depending on the species. Long-lasting insecticide-treated (LLITN) nets, factory pre-treated, have been used since years to fight against mosquitoes vector of malaria and are able to retain their biological efficacy under field for 3 years. In agriculture, treated nets with different insecticides have shown efficacy in controlling some insects and mites, so they seem to be a good tool in helping to solve some pest problems. However, treated nets must be carefully evaluated because can diminish air flow, increase temperature and humidity and decrease light transmission, which may affect plant growth, pests and natural enemies. As biological control is considered a key factor in IPM nowadays, the potential negative effects of treated nets on natural enemies need to be studied carefully. In this work, the effects of a bifentrhin-treated net (3 g/Kg) (supplied by the company Intelligent Insect Control, IIC) on natural enemies of aphids were tested on a cucumber crop in Central Spain in autumn 2011. The crop was sown in 8x6.5 m tunnels divided in 2 sealed compartments with control or treated nets, which were simple yellow netting with 25 mesh (10 x 10 threads/cm2; 1 x 1 mm hole size). Pieces of 2 m high of the treated-net were placed along the lateral sides of one of the two tunnel compartments in each of the 3 available tunnels (replicates); the rest was covered by a commercial untreated net of a similar mesh. The pest, Aphis gossypii Glover (Aphidae), the parasitoid Aphidius colemani (Haliday) (Braconidae) and the predator Adalia bipunctata L. (Coccinellidae) were artificially introduced in the crop. Weekly sampling was done determining the presence or absence of the pest and the natural enemies (NE) in the 42 plants/compartment as well as the number of insects in 11 marked plants. Environmental conditions (temperature, relative humidity, UV and PAR radiation) were recorded. Results show that when aphids were artificially released inside the tunnels, neither its number/plant nor their distribution was affected by the treated net. A lack of negative effect of the insecticide-treated net on natural enemies was also observed. Adalia bipunctata did not establish in the crop and only a short term control of aphids was observed one week after release. On the other hand, A. colemani did establish in the crop and a more long-term effect on the numbers of aphids/plant was detected irrespective of the type of net. KEY WORDS: bifenthrin-treated net, Adalia bipunctata, Aphidius colemani, Aphis gossypii, semi-field

A new class of symbolic abstract neural nets

Starting from the way the inter-cellular communication takes place by means of protein channels and also from the standard knowledge about neuron functioning, we propose a computing model called a tissue P system, which processes symbols in a multiset rewriting sense, in a net of cells similar to a neural net. Each cell has a finite state memory, processes multisets of symbol-impulses, and can send impulses (?excitations?) to the neighboring cells. Such cell nets are shown to be rather powerful: they can simulate a Turing machine even when using a small number of cells, each of them having a small number of states. Moreover, in the case when each cell works in the maximal manner and it can excite all the cells to which it can send impulses, then one can easily solve the Hamiltonian Path Problem in linear time. A new characterization of the Parikh images of ET0L languages are also obtained in this framework.

Radio-echo sounding and ice volume estimates of western Nordenskiöld Land glaciers, Svalbard

As part of ongoing work to obtain a reliable estimate of the total ice volume of Svalbard glaciers and their potential contribution to sea-level rise, we present here volume calculations, with detailed error estimates, for ten glaciers on western Nordenskiöld Land, central Spitsbergen, Svalbard. The volume estimates are based upon a dense net of GPR-retrieved ice thickness data collected over several field campaigns spanning the period 1999-2012. On the basis of the pattern of scattering in theradargrams, we also analyse the hydrothermal structure of these glaciers.

Parametric Generation of Planing Hulls with NURBS Surfaces

This article presents a mathematical method for producing hard-chine ship hulls based on a set of numerical parameters that are directly related to the geometric features of the hull and uniquely define a hull form for this type of ship. The term planing hull is used generically to describe the majority of hard-chine boats being built today. This article is focused on unstepped, single-chine hulls. B-spline curves and surfaces were combined with constraints on the significant ship curves to produce the final hull design. The hard-chine hull geometry was modeled by decomposing the surface geometry into boundary curves, which were defined by design constraints or parameters. In planing hull design, these control curves are the center, chine, and sheer lines as well as their geometric features including position, slope, and, in the case of the chine, enclosed area and centroid. These geometric parameters have physical, hydrodynamic, and stability implications from the design point of view. The proposed method uses two-dimensional orthogonal projections of the control curves and then produces three-dimensional (3-D) definitions using B-spline fitting of the 3-D data points. The fitting considers maximum deviation from the curve to the data points and is based on an original selection of the parameterization. A net of B-spline curves (stations) is then created to match the previously defined 3-D boundaries. A final set of lofting surfaces of the previous B-spline curves produces the hull surface.

Ground-penetrating radar surveys and ice volume estimates of Wedel Jarlsberg Land glaciers, Svalbard

We present volume calculations, with detailed error estimates, for eight glaciers on Wedel Jarlsberg Land, southern Spitsbergen, Svalbard, and compare them to those obtained from area-volume scaling relationships. The volume estimates are based upon a dense net of GPR-retrieved ice thickness data collected over several field campaigns spanning the period 2004-2011.

A simplified spectral approachfor impedance-based damage identification of frp-strengthened rc beams

Hoy en día, el refuerzo y reparación de estructuras de hormigón armado mediante el pegado de bandas de polímeros reforzados con fibras (FRP) se emplea cada vez con más frecuencia a causa de sus numerosas ventajas. Sin embargo, las vigas reforzadas con esta técnica pueden experimentar un modo de fallo frágil a causa del despegue repentino de la banda de FRP a partir de una fisura intermedia. A pesar de su importancia, el número de trabajos que abordan el estudio de este mecanismo de fallo y su monitorización es muy limitado. Por ello, el desarrollo de metodologías capaces de monitorizar a largo plazo la adherencia de este refuerzo a las estructuras de hormigón e identificar cuándo se inicia el despegue de la banda constituyen un importante desafío a abordar. El principal objetivo de esta tesis es la implementación de una metodología fiable y efectiva, capaz de detectar el despegue de una banda de FRP en una viga de hormigón armado a partir de una fisura intermedia. Para alcanzar este objetivo se ha implementado un procedimiento de calibración numérica a partir de ensayos experimentales. Para ello, en primer lugar, se ha desarrollado un modelo numérico unidimensional simple y no costoso representativo del comportamiento de este tipo vigas de hormigón reforzadas con FRP, basado en un modelo de fisura discreta para el hormigón y el método de elementos espectrales. La formación progresiva de fisuras a flexion y el consiguiente despegue en la interface entre el hormigón y el FRP se formulan mediante la introducción de un nuevo elemento capaz de representar ambos fenómenos simultáneamente sin afectar al procedimiento numérico. Además, con el modelo propuesto, se puede obtener de una forma sencilla la respuesta dinámica en altas frecuencias de este tipo de estructuras, lo cual puede hacer muy útil su uso como herramienta de diagnosis y detección del despegue en su fase inicial mediante una monitorización de la variación de las características dinámicas locales de la estructura. Un método de evaluación no destructivo muy prometedor para la monitorización local de las estructuras es el método de la impedancia usando sensores-actuadores piezoeléctricos (PZT). La impedancia eléctrica de los sensores PZT se puede relacionar con la impedancia mecánica de las estructuras donde se encuentran adheridos Ya que la impedancia mecánica de una estructura se verá afectada por su deterioro, se pueden implementar indicadores de daño mediante una comparación del espectro de admitancia (inversa de la impedancia) a lo largo de distintas etapas durante el periodo de servicio de una estructura. Cualquier cambio en el espectro se podría interpretar como una variación en la integridad de la estructura. La impedancia eléctrica se mide a altas frecuencias con lo cual esta metodología debería ser muy sensible a la detección de estados de daño incipiente local, tal como se desea en la aplicación de este trabajo. Se ha implementado un elemento espectral PZT-FRP como extensión del modelo previamente desarrollado, con el objetivo de poder calcular numéricamente la impedancia eléctrica de sensores PZT adheridos a bandas de FRP sobre una viga de hormigón armado. El modelo, combinado con medidas experimentales captadas mediante sensores PZT, se implementa en el marco de una metodología de calibración de modelos para detectar cuantitativamente el despegue en la interfase entre una banda de FRP y una viga de hormigón. El procedimiento de optimización se resuelve empleando el método del enjambre cooperativo con un algoritmo bagging. Los resultados muestran una gran aproximación en la estimación del daño para el problema propuesto. Adicionalmente, se ha desarrollado también un método adaptativo para el mallado de elementos espectrales con el objetivo de localizar las zonas dañadas a partir de los resultados experimentales, el cual contribuye a aumentar la robustez y efectividad del método propuesto a la hora de identificar daños incipientes en su aparición inicial. Finalmente, se ha llevado a cabo un procedimiento de optimización multi-objetivo para detectar el despegue inicial en una viga de hormigón a escala real reforzada con FRP a partir de las impedancias captadas con una red de sensores PZT instrumentada a lo largo de la longitud de la viga. Cada sensor aporta los datos para definir cada una de las funciones objetivo que definen el procedimiento. Combinando el modelo previo de elementos espectrales con un algoritmo PSO multi-objetivo el procedimiento de detección de daño resultante proporciona resultados satisfactorios considerando la escala de la estructura y todas las incertidumbres características ligadas a este proceso. Los resultados obtenidos prueban la viabilidad y capacidad de los métodos antes mencionados y también su potencial en aplicaciones reales. Abstract Nowadays, the external bonding of fibre reinforced polymer (FRP) plates or sheets is increasingly used for the strengthening and retrofitting of reinforced concrete (RC) structures due to its numerous advantages. However, this kind of strengthening often leads to brittle failure modes being the most dominant failure mode the debonding induced by an intermediate crack (IC). In spite of its importance, the number of studies regarding the IC debonding mechanism and bond health monitoring is very limited. Methodologies able to monitor the long-term efficiency of bonding and successfully identify the initiation of FRP debonding constitute a challenge to be met. The main purpose of this thesisis the implementation of a reliable and effective methodology of damage identification able to detect intermediate crack debonding in FRP-strengthened RC beams. To achieve this goal, a model updating procedure based on numerical simulations and experimental tests has been implemented. For it, firstly, a simple and non-expensive one-dimensional model based on the discrete crack approach for concrete and the spectral element method has been developed. The progressive formation of flexural cracks and subsequent concrete-FRP interfacial debonding is formulated by the introduction of a new element able to represent both phenomena simultaneously without perturbing the numerical procedure. Furthermore, with the proposed model, high frequency dynamic response for these kinds of structures can also be obtained in a very simple and non-expensive way, which makes this procedure very useful as a tool for diagnoses and detection of debonding in its initial stage by monitoring the change in local dynamic characteristics. One very promising active non-destructive evaluation method for local monitoring is impedance-based structural health monitoring(SHM)using piezoelectric ceramic (PZT) sensor-actuators. The electrical impedance of the PZT can be directly related to the mechanical impedance of the host structural component where the PZT transducers are attached. Since the structural mechanical impedance will be affected by the presence of structural damage, comparisons of admittance (inverse of impedance) spectra at various times during the service period of the structure can be used as damage indicator. Any change in the spectra might be an indication of a change in the structural integrity. The electrical impedance is measured at high frequencies with which this methodology appears to be very sensitive to incipient damage in structural systems as desired for our application. Abonded-PZT-FRP spectral beam element approach based on an extension of the previous discrete crack approach is implemented in the calculation of the electrical impedance of the PZT transducer bonded to the FRP plates of a RC beam. This approach in conjunction with the experimental measurements of PZT actuator-sensors mounted on the structure is used to present an updating methodology to quantitatively detect interfacial debonding between a FRP strip and the host RC structure. The updating procedure is solved by using an ensemble particle swarm optimization approach with abagging algorithm, and the results demonstrate a big improvement for the performance and accuracy of the damage detection in the proposed problem. Additionally, an adaptive strategy of spectral element mesh has been also developed to detect damage location with experimental results, which shows the robustness and effectiveness of the proposed method to identify initial and incipient damages at its early stage. Lastly, multi-objective optimization has been carried out to detect debonding damage in a real scale FRP-strengthened RC beam by using impedance signatures. A net of PZT sensors is distributed along the beam to construct impedance-based multiple objectives under gradually induced damage scenario. By combining the spectral element model presented previously and an ensemble multi-objective PSO algorithm, the implemented damage detection process yields satisfactory predictions considering the scale and uncertainties of the structure. The obtained results prove the feasibility and capability of the aforementioned methods and also their potentials in real engineering applications.

Ice volume estimates from ground-penetrating radar surveys, western Nordenskiöld Land glaciers, Svalbard

As part of ongoing work within the SvalGlac project aimed to obtain a reliable estimate of the total ice volume of Svalbard glaciers and their potential contribution to sea level rise, in this contribution we present volume calculations, with detailed error estimates, for ten glaciers on western Nordenskiöld Land, central Spitsbergen, Svalbard. The volume estimates are based upon a dense net of GPR-retrieved ice thickness data collected over several field campaigns spanning the period 1999-2012, all of them except one within 2010-2012. The total area and volume of the ensemble are 113.38±0.09 km2 and 10.439±0.185 km3, respectively, while the individual areas, volumes and average ice thickness lie within 2.5-49.1 km2, 0.08-5.48 km3 and 29-108 m, respectively. The maximum recorded ice thickness, 265±15 m, corresponds to Fridtjovbreen, which has also the largest average thickness (108±1m). Available empirical formulae for Svalbard glaciers overestimate the total volume of these glaciers by 24% with respect to our calculation. On the basis of the pattern of scattering in the radargrams, we also analyse the hydrothermal structure of these glaciers. Nine out of ten are polythermal, while only one is entirely cold.

Ice volume estimates from ground-penetrating radar surveys, Wedel Jarlsberg Land glaciers, Svalbard

One of the aims of the SvalGlac project is to obtain an improved estimate, with reliable error estimates, of the volume of Svalbard glaciers and their potential contribution to sea level rise. As part of this work, we present volume calculations, with detailed error estimates, for eight glaciers on Wedel Jarlsberg Land, southern Spitsbergen, Svalbard. The volume estimates are based upon a dense net of GPR-retrieved ice thickness data collected over several field campaigns spanning the period 2004-2011. The total area and volume of the ensemble are 502.9±18.6 km2 and 80.72±2.85 km3, respectively. Excluding Ariebreen (a tiny glacier, menor que 0.4 km2 in area), the individual areas, volumes and average ice thickness lie within 4.7-141.0 km2, 0.30-25.85 km3 and 64-183 m, respectively. The maximum recorded ice thickness, ca. 619±13 m, is found in Austre Torellbreen. To estimate the ice volume of small non-echo-sounded tributary glaciers, we used a function providing the best fit to the ice thickness along the centre line of a collection of such tributaries where echo-soundings were available, and assuming parabolic cross-sections. We did some tests on the effect on the measured ice volumes of the distinct radio-wave velocity (RWV) of firn as compared to ice, and cold versus temperate ice, concluding that the changes in volume implied by such corrections were within the error bounds of our volume estimate using a constant RWV for the entire glacier inferred from common mid-point measurements on the upper ablation area.

Estudio y desarrollo del plan de negocio de una empresa: Sistema Web que gestiona e informa sobre las cuentas digitales que el cliente ingresa

El presente documento tiene como objetivo general desarrollar un plan de negocio para analizar la viabilidad de la creación de una nueva empresa, “MyTested S.L.”. Pretende ofrecer una herramienta para que las personas puedan comunicar a sus familiares el acceso a sus cuentas digitales una vez fallecidos. En cuanto a cómo surge la idea, fue a través de una noticia que trataba sobre el derecho al olvido en las redes sociales y en internet. Investigando un poco y prestando atención a los movimientos de las grandes empresas de internet, mi compañero/socio y yo, nos dimos cuenta de que ofrecer este servicio podría valer como negocio, ya que no existe mucha competencia en el mercado. Gracias a eso, nos planteamos en más de una ocasión la posibilidad de montar nuestro propio negocio, de forma que pudiéramos utilizar los conocimientos adquiridos en la universidad como base para crear la herramienta web. Escogimos empezar el proyecto utilizándolo como materia para el trabajo de fin de grado porque nos aporta dos valores muy importantes, ayuda de la comunidad de profesores existentes en la UPM, siendo una persona de gran aporte nuestro tutor Oscar Corcho y también, porque como estamos dedicando todo el tiempo a este proyecto, tener una fecha límite para presentar tanto la parte de modelo de negocio como la parte de desarrollo en una fecha concreta, nos ayuda a planificar y mantener una presión constante sobre el proyecto y así forzar a no abandonarlo ni prolongarlo. Con ello, nos encontramos con dos grupos de dificultades, la escasa formación a nivel empresarial y creación de modelos de negocio y en el ámbito del desarrollo al desconocimiento de tecnologías y APIs de las redes sociales. Al tratarse de una herramienta Web, parte de unos costes muy bajos como el alojamiento del servidor o la contratación temporal de comerciales para publicitar la herramienta entre funerarias y hospitales. Estos factores positivos benefician tanto la realización del proyecto como su avance. Como ya se puede intuir de la lectura del párrafo anterior, el servicio que ofrece la herramienta “MyTested S.L.” está relacionado con el segmento testamental de una persona fallecida, podríamos definirlo como testamento digital. Actualmente, vivimos en un mundo que se centra cada vez más en la parte digital y es por ello, que en un futuro cercano, todas las cuentas que creamos en internet tendrán que ser cerradas o bloqueadas cuando caen en el desuso por el fallecimiento del propietario, es en ese hueco donde podemos situarnos, ofreciendo una herramienta para poder trasladar la información necesaria a las personas elegidas por el cliente para que puedan cerrar o bloquear sus cuentas digitales. Consideramos que existe una interesante oportunidad debido a la escasez de oferta de este tipo de servicios en España y a nivel mundial. En Abril de 2015 hay inscritos en el registro Nacional de últimas voluntades 185.6651 personas por lo que encontramos que un 0,397%1 de las personas en España ha registrado su testamento. El gasto medio al hacer un testamento vital ante notario de tus bienes tiene un coste de 40 a 80 euros2 , este es el principal motivo por el que la mayoría de españoles no realiza su testamento antes de morir. Con este dato obtenemos dos lecciones, lo que la herramienta ofrece no es el documento notarial de los bienes del cliente, sino la sistema, puedan bloquear o cerrar sus cuentas. La segunda lección que obtenemos es que el precio tiene que ser muy reducido para poder llegar a un gran número de personas, añadiendo también el criterio de que el cliente podrá actualizar su información, ya que la información digital es muy fácil de cambiar y frecuente. Como se podrá leer en al apartado dedicado a nuestra visión, misión y valores, aunque estamos convencidos que se puede extraer de la lectura de cualquier parte de este documento, todos nuestros objetivos los queremos conseguir no sólo buscando un enfoque empresarial a nuestro día a día, sino convirtiendo nuestra responsabilidad social sincera, en uno de los retos que más nos ilusionan, fomentando para ello, aspectos como el desarrollo web, estudios de mercado, conocimiento de las necesidades de la población, nuevas tecnologías y negocio. En general, los objetivos que se pretenden cumplir con este estudio son: - Conocer los pasos para crear una empresa - Desarrollar un documento de plan de negocio que contenga lo siguiente: - Análisis de mercado - Definición de productos y/o servicios - Plan de publicidad y expansión (marketing) - Plan financiero - Capacidad para definir los requisitos de una aplicación Web. - Capacidad de elegir la tecnología idónea y actual de un sistema Web. - Conocer el funcionamiento de una empresa y cómo comunicarse con las herramientas gubernamentales. - Comprobar si las posibilidades que nos ofrece el entorno son las adecuadas para nuestras actividades. - Estudio, análisis de la competencia - Definir los diferentes perfiles de cliente para nuestro negocio. - Analizar la viabilidad de nuestro modelo de negocio. Para ello, comenzamos realizando una definición de las características generales del proyecto, detallando cuáles son las motivaciones que han hecho a los emprendedores embarcarse en el mismo, qué servicios ofreceremos a nuestros clientes, el porqué de la elección del sector, así́ como nuestra misión, visión y valores.---ABSTRACT---The goal and aim of the present document is to develop a business plan in order to analyze the viability of build a new enterprise, that we will name MyTested S.L., it wants offer a tool for sharing and to facilitate to the relatives of a dead person the access to the digital accounts. Talking about how come up the idea, it was once a have read a news over the “right of forgotten” throughout social nets and inside internet, researching a little and paying attention to the different movements of the biggest internet companies, my peer ( and partner) and I were aware that to offer this service might be a good business, because does not exist many competitors on this kind of market service, mainly thanks of that, we have planned on several times the possibility to build our owner company, in the way to use the capabilities that we achieved in the University as based to develop and make a web tool. We choose begin this project as subject of our Final Project Degree after analyze the positive and negative point of views: The positive was because it has two main values, firstly the support of the current teachers UPM community, specially our fellow Oscar Corcho and also because we can´t dedicate all our time to this project, so to have a deadline to present either the business model as the develop on time, help us to plan and remain a constant pressure over the project and neither drop out it or extend it more that the necessary. As a web tool, neither the hosting of maintenance or for sort out a net of temporary commercials for visiting hospitals or undertaker´s or insurances, the cost don´t are expensive In the negative side, however, we found twice some main difficulties, the few training as entrepreneur level and how to build a business model and on the other hand the lack of awareness of the technologies and apps of the social net software as well. As summary, these positives facts enhance to work project out and also to develop it. As we could understand reading on the latest paragraph, the service that will do MyTested tool is relation with the testament issue of a dead person, we might call as a digital testament. Currently we are living in world which is focus further on the digital life, for that in a near future every internet accounts should be closed or locked whenever aren´t used by the dead of the owner, this is a market niche (never better said) where we can lead, offering a tool that might transfer the necessary information to the chosen persons by the client in order to allow either close or lock his digital accounts. We are considering that there are interesting opportunities due to the few offers of that kind of service in Spain and at global level. In April 2015 there were 185.6651 persons registered in the Official National last will and testament, this figure mean that the 0,397%1 of the Spaniards citizens have registered their testaments. The average cost of doing the testament of your assets with a Notary is since 40 up to 80€2, this is one of the principal motives because the majority of the Spaniards don´t do it before dead. With these data we might get two lessons, we are not talking about an official notary testament at all, it is only for close or lock the digital accounts by the chosen person by the dead client, and the latest lesson, but not least, the price of our service must be very cheaper in order to achieve touch an important amount of people, knowing also that he client will be able update the information filled, considering that this kind of information is very easy to change and update frequently. As we can read on the stage dedicated to our Vision, Mission and Values, although we are persuaded that can be read in everywhere of this document as well, our aim doesn´t be an business focus on day to day, is also to become our honest social responsibility in this challenge, that is our mainly eagerness, enhancing some aspects as the web development, market research and the knowledge of the population needs, new technologies and new market opportunities. In general the goals that we would like get within this project are: - Achieve the knowledge needs for be an entrepreneurial, and find out the steps for star a business - Achieve market research skills - Products and services definitions - Advertising plan and growth (marketing plan) - Financial plan knowledge - Capability of a web design requirements - Capability for choose the best and actual technology for web design - Knowledge over how work out inside a company and how communicate with official tools. - Check whether the possibilities of the environment are the adequate for our activities. - Research and competitiveness analysis - Define the different profiles of the target for our business. - Analyze the viability of the business model For all that, we began with a definition of the general features of the project, detailing which are the motivations those done to the entrepreneurial get on board, which kind of service we offered to the client, also why the selection of the market sector and our mission, vision and value as well.

Two-dimensional isostatic meshes in the finite element method

In a Finite Element (FE) analysis of elastic solids several items are usually considered, namely, type and shape of the elements, number of nodes per element, node positions, FE mesh, total number of degrees of freedom (dot) among others. In this paper a method to improve a given FE mesh used for a particular analysis is described. For the improvement criterion different objective functions have been chosen (Total potential energy and Average quadratic error) and the number of nodes and dof's of the new mesh remain constant and equal to the initial FE mesh. In order to find the mesh producing the minimum of the selected objective function the steepest descent gradient technique has been applied as optimization algorithm. However this efficient technique has the drawback that demands a large computation power. Extensive application of this methodology to different 2-D elasticity problems leads to the conclusion that isometric isostatic meshes (ii-meshes) produce better results than the standard reasonably initial regular meshes used in practice. This conclusion seems to be independent on the objective function used for comparison. These ii-meshes are obtained by placing FE nodes along the isostatic lines, i.e. curves tangent at each point to the principal direction lines of the elastic problem to be solved and they should be regularly spaced in order to build regular elements. That means ii-meshes are usually obtained by iteration, i.e. with the initial FE mesh the elastic analysis is carried out. By using the obtained results of this analysis the net of isostatic lines can be drawn and in a first trial an ii-mesh can be built. This first ii-mesh can be improved, if it necessary, by analyzing again the problem and generate after the FE analysis the new and improved ii-mesh. Typically, after two first tentative ii-meshes it is sufficient to produce good FE results from the elastic analysis. Several example of this procedure are presented.

Flying capacity of Psyttalia concolor and Chrysoperla carnea under a UV-absorbing net (Bionet®) in presence and absence of crop.

Field studies were conducted in walk-in tunnels to determine the flying capacity in the presence and absence of crop, of the parasitoid Psyttalia concolor and the predator Chrysoperla carnea under a UV-absorbent net (Bionet®). Yellow sticky cards were used for insect recovery but neither P. concolor nor C. carnea were very attracted to them, thus captures were too low to permit any meaningful comparisons. Bionet® did not seem to affect the mobility of any natural enemy irrespective of the trap location and monitoring hour. Climatic conditions inside nets were very extreme (average temperatures very high and relative humidity very low) threatening insect survival. New experiments are being developed, trying to find new attractants that permit a significant capture of both natural enemies.

Intercultural Approaches to Cities and Spaces in Literature, Film, and New Media: a review of new work by Manzanas and Benito and Lopez-Varela and Net

Intercultural Approaches to Cities and Spaces in Literature, Film, and New Media: a review of new work by Manzanas and Benito and Lopez-Varela and Net

Probabilistic analysis of water availability for agriculture and associated crop net margins.

Rising water demands are difficult to meet in many regions of the world. In consequence, under meteorological adverse conditions, big economic losses in agriculture can take place. This paper aims to analyze the variability of water shortage in an irrigation district and the effect on farmer?s income. A probabilistic analysis of water availability for agriculture in the irrigation district is performed, through a supply-system simulation approach, considering stochastically generated series of stream-flows. Net margins associated to crop production are as well estimated depending on final water allocations. Net margins are calculated considering either single-crop farming, either a polyculture system. In a polyculture system, crop distribution and water redistribution are calculated through an optimization approach using the General Algebraic Modeling System (GAMS) for several scenarios of irrigation water availability. Expected net margins are obtained by crop and for the optimal crop and water distribution. The maximum expected margins are obtained for the optimal crop combination, followed by the alfalfa monoculture, maize, rice, wheat and finally barley. Water is distributed as follows, from biggest to smallest allocation: rice, alfalfa, maize, wheat and barley.

Passive design strategies and performance of Net Energy Plus Houses

The first step in order to comply with the European Union goals of Near to Zero Energy Buildings is to reduce the energy consumption in buildings. Most of the building consumption is related to the use of active systems to maintain the interior comfort. Passive design strategies contribute to improve the interior comfort conditions, increasing the energy efficiency in buildings and reducing their energy consumption. In this work, an analysis of the passive strategies used in Net Energy Plus Houses has been made. The participating houses of the Solar Decathlon Europe 2012 competition were used as case studies. The passive design strategies of these houses were compared with the annual simulations, and the competition monitored data, especially during the Passive Monitored Period. The analysis included the thermal properties of the building envelope, geometric parameters, ratios and others passive solutions such as Thermal Energy Storage systems, evaporative cooling, night ventilation, solar gains and night sky radiation cooling. The results reflect the impact of passive design strategies on the houses' comfort and efficiency, as well as their influence in helping to achieve the Zero Energy Buildings category.