Comparative Analysis of Firms’ Participation in National and International Programmes to Support Innovation

Innovation is a process that faces several market failure situations. For this reason and for being considered one of the main drivers of economic growth, a large number of governmental and supranational policies are designed to foster technological progress. Along with these policies, there is an increasing concern with their continuous evaluation aiming at providing valuable feedback for these program?s adaptation and adequacy to the firm?s needs. The paper develops an evaluation of the influence of innovation-focused programs in firm¿s innovation and economic performance by means of a comparative analysis of the results obtained by Spanish firms that have participated in R&D national programmes and those achieved by Spanish firms participating in EUREKA international program. Findings show that the programmes were effective in achieving their objective of promoting technological innovation but, as regards the economic effects, the results were less conclusive since some differences were observed depending on the programme. The EUREKA companies displayed better behaviour, with positive differences in their returns on assets and labour productivity. The results also confirm the importance of designing more detailed and rigorous evaluation processes, taking into account the risk variable, in order to draw a more realistic picture of the impact of national and international programmes.

Estimación del riesgo sísmico en puerto príncipe (Haití)

Tras el devastador terremoto del 12 de enero de 2010 en Puerto Príncipe, Haití, las autoridades locales, numerosas ONGs y organismos nacionales e internacionales están trabajando en el desarrollo de estrategias para minimizar el elevado riesgo sísmico existente en el país. Para ello es necesario, en primer lugar, estimar dicho riesgo asociado a eventuales terremotos futuros que puedan producirse, evaluando el grado de pérdidas que podrían generar, para dimensionar la catástrofe y actuar en consecuencia, tanto en lo referente a medidas preventivas como a adopción de planes de emergencia. En ese sentido, este Trabajo Fin de Master aporta un análisis detallado del riesgo sísmico asociado a un futuro terremoto que podría producirse con probabilidad razonable, causando importantes daños en Puerto Príncipe. Se propone para ello una metodología de cálculo del riesgo adaptada a los condicionantes de la zona, con modelos calibrados empleando datos del sismo de 2010. Se ha desarrollado en el marco del proyecto de cooperación Sismo-Haití, financiado por la Universidad Politécnica de Madrid, que comenzó diez meses después del terremoto de 2010 como respuesta a una petición de ayuda del gobierno haitiano. El cálculo del riesgo requiere la consideración de dos inputs: la amenaza sísmica o movimiento esperado por el escenario definido (sismo de cierta magnitud y localización) y los elementos expuestos a esta amenaza (una clasificación del parque inmobiliario en diferentes tipologías constructivas, así como su vulnerabilidad). La vulnerabilidad de estas tipologías se describe por medio de funciones de daño: espectros de capacidad, que representan su comportamiento ante las fuerzas horizontales motivadas por los sismos, y curvas de fragilidad, que representan la probabilidad de que las estructuras sufran daños al alcanzar el máximo desplazamiento horizontal entre plantas debido a la mencionada fuerza horizontal. La metodología que se propone especifica determinadas pautas y criterios para estimar el movimiento, asignar la vulnerabilidad y evaluar el daño, cubriendo los tres estados del proceso. Por una parte, se consideran diferentes modelos de movimiento fuerte incluyendo el efecto local, y se identifican los que mejor ajustan a las observaciones de 2010. Por otra se clasifica el parque inmobiliario en diferentes tipologías constructivas, en base a la información extraída en una campaña de campo y utilizando además una base de datos aportada por el Ministerio de Obras Públicas de Haití. Ésta contiene información relevante de todos los edificios de la ciudad, resultando un total de 6 tipologías. Finalmente, para la estimación del daño se aplica el método capacidad-demanda implementado en el programa SELENA (Molina et al., 2010). En primer lugar, utilizado los datos de daño del terremoto de 2010, se ha calibrado el modelo propuesto de cálculo de riesgo sísmico: cuatro modelos de movimiento fuerte, tres modelos de tipo de suelo y un conjunto de funciones de daño. Finalmente, con el modelo calibrado, se ha simulado un escenario sísmico determinista correspondiente a un posible terremoto con epicentro próximo a Puerto Príncipe. Los resultados muestran que los daños estructurales serán considerables y podrán llevar a pérdidas económicas y humanas que causen un gran impacto en el país, lo que pone de manifiesto la alta vulnerabilidad estructural existente. Este resultado será facilitado a las autoridades locales, constituyendo una base sólida para toma de decisiones y adopción de políticas de prevención y mitigación del riesgo. Se recomienda dirigir esfuerzos hacia la reducción de la vulnerabilidad estructural - mediante refuerzo de edificios vulnerables y adopción de una normativa sismorresistente- y hacia el desarrollo de planes de emergencia. Abstract After the devastating 12 January 2010 earthquake that hit the city of Port-au-Prince, Haiti, strategies to minimize the high seismic risk are being developed by local authorities, NGOs, and national and international institutions. Two important tasks to reach this objective are, on the one hand, the evaluation of the seismic risk associated to possible future earthquakes in order to know the dimensions of the catastrophe; on the other hand, the design of preventive measures and emergency plans to minimize the consequences of such events. In this sense, this Master Thesis provides a detailed estimation of the damage that a possible future earthquake will cause in Port-au-Prince. A methodology to calculate the seismic risk is proposed, adapted to the study area conditions. This methodology has been calibrated using data from the 2010 earthquake. It has been conducted in the frame of the Sismo-Haiti cooperative project, supported by the Technical University of Madrid, which started ten months after the 2010 earthquake as an answer to an aid call of the Haitian government. The seismic risk calculation requires two inputs: the seismic hazard (expected ground motion due to a scenario earthquake given by magnitude and location) and the elements exposed to the hazard (classification of the building stock into building typologies, as well as their vulnerability). This vulnerability is described through the damage functions: capacity curves, which represent the structure performance against the horizontal forces caused by the seisms; and fragility curves, which represent the probability of damage as the structure reaches the maximum spectral displacement due to the horizontal force. The proposed methodology specifies certain guidelines and criteria to estimate the ground motion, assign the vulnerability, and evaluate the damage, covering the whole process. Firstly, different ground motion prediction equations including the local effect are considered, and the ones that have the best correlation with the observations of the 2010 earthquake, are identified. Secondly, the classification of building typologies is made by using the information collected during a field campaign, as well as a data base provided by the Ministry of Public Works of Haiti. This data base contains relevant information about all the buildings in the city, leading to a total of 6 different typologies. Finally, the damage is estimated using the capacity-spectrum method as implemented in the software SELENA (Molina et al., 2010). Data about the damage caused by the 2010 earthquake have been used to calibrate the proposed calculation model: different choices of ground motion relationships, soil models, and damage functions. Then, with the calibrated model, a deterministic scenario corresponding to an epicenter close to Port-au-Prince has been simulated. The results show high structural damage, and therefore, they point out the high structural vulnerability in the city. Besides, the economic and human losses associated to the damage would cause a great impact in the country. This result will be provided to the Haitian Government, constituting a scientific base for decision making and for the adoption of measures to prevent and mitigate the seismic risk. It is highly recommended to drive efforts towards the quality control of the new buildings -through reinforcement and construction according to a seismic code- and the development of emergency planning.

Land use modelling and the role of stakeholders in natural protected areas: the case of Doñana national park, Spain

Doñana, a National Park since 1969, a UNESCO site since 1994 among other protected area designations of national and international character, is a coastal dune and marshland ecosystem of outstanding importance for biodiversity and conservation at the mouth of the Guadalaquivir River, Southwest Spain. However, the Doñana natural area is seriously threatened by global change factors such as humanly induced climate change, habitat loss, overexploitation of ecosystem services, and pollution. Not all stakeholders are convinced of the benefits of the national park, and management of Doñana, its environs and watershed are the subject of intense disagreement. This interplay between natural characteristics of great value with intense human pressure makes Doñana a fascinating workshop for the study of global human environment interactions. Here, we discuss the role of stakeholders in the application of a cellular automatabased model to Doñana and its environs and present the results of a series of exercises undertaken with stakeholders to parametrize the model, something often done by researchers without stakeholder engagement. By engaging with stakeholders early in the project, feedback generated from workshops contributes to model development. Stakeholders are therefore contributors of empirical data for the model as well as independent evaluators providing local and specialist knowledge.

Risk assessment of the spanish national railway system

The principal risks in the railway industry are mainly associated with collisions, derailments and level crossing accidents. An understanding of the nature of previous accidents on the railway network is required to identify potential causes and develop safety systems and deploy safety procedures. Risk assessment is a process for determining the risk magnitude to assist with decision-making. We propose a three-step methodology to predict the mean number of fatalities in railway accidents. The first is to predict the mean number of accidents by analyzing generalized linear models and selecting the one that best fits to the available historical data on the basis of goodness-offit statistics. The second is to compute the mean number of fatalities per accident and the third is to estimate the mean number of fatalities. The methodology is illustrated on the Spanish railway system. Statistical models accounting for annual and grouped data for the 1992-2009 time period have been analyzed. After identifying the models for broad and narrow gauges, we predicted mean number of accidents and the number of fatalities for the 2010-18 time period.

Rectangular room dimensions estimation using narrowband signal and sectorized antennas

A system for estimation of unknown rectangular room dimensions based on two radio transceivers, both capable of full duplex operations, is presented. The approach is based on CIR measurements taken at the same place where the signal is transmitted (generated), commonly known as self- to-self CIR. Another novelty is the receiver antenna design which consists of eight sectorized antennas with 45° aperture in the horizontal plane, whose total coverage corresponds to the isotropic one. The dimensions of a rectangular room are reconstructed directly from radio impulse responses by extracting the information regarding features like round trip time, received signal strength and reverberation time. Using radar approach the estimation of walls and corners positions are derived. Additionally, the analysis of the absorption coefficient of the test environment is conducted and a typical coefficient for office room with furniture is proposed. Its accuracy is confirmed through the results of volume estimation. Tests using measured data were performed, and the simulation results confirm the feasibility of the approach.

Procedure for verification of sound source coverage over façades according to the International Standard ISO 140-5

This paper presents a new verification procedure for sound source coverage according to ISO 140?5 requirements. The ISO 140?5 standard applies to the measurement of façade insulation and requires a sound source able to achieve a sufficiently uniform sound field in free field conditions on the façade under study. The proposed method involves the electroacoustic characterisation of the sound source in laboratory free field conditions (anechoic room) and the subsequent prediction by computer simulation of the sound free field radiated on a rectangular surface equal in size to the façade being measured. The loudspeaker is characterised in an anechoic room under laboratory controlled conditions, carefully measuring directivity, and then a computer model is designed to calculate the acoustic free field coverage for different loudspeaker positions and façade sizes. For each sound source position, the method provides the maximum direct acoustic level differences on a façade specimen and therefore determines whether the loudspeaker verifies the maximum allowed level difference of 5 dB (or 10 dB for façade dimensions greater than 5 m) required by the ISO standard. Additionally, the maximum horizontal dimension of the façade meeting the standard is calculated and provided for each sound source position, both with the 5 dB and 10 dB criteria. In the last section of the paper, the proposed procedure is compared with another method used by the authors in the past to achieve the same purpose: in situ outdoor measurements attempting to recreate free field conditions. From this comparison, it is concluded that the proposed method is able to reproduce the actual measurements with high accuracy, for example, the ground reflection effect, at least at low frequencies, which is difficult to avoid in the outdoor measurement method, and it is fully eliminated with the proposed method to achieve the free field requisite.

Influence of loudspeaker directivity and measurement geometry on direct acoustic levels over façades for acoustic insulation tests with the International Standard ISO 140-5

The International Standard ISO 140-5 on field measurements of airborne sound insulation of façades establishes that the directivity of the measurement loudspeaker should be such that the variation in the local direct sound pressure level (ΔSPL) on the sample is ΔSPL < 5 dB (or ΔSPL < 10 dB for large façades). This condition is usually not very easy to accomplish nor is it easy to verify whether the loudspeaker produces such a uniform level. Direct sound pressure levels on the ISO standard façade essentially depend on the distance and directivity of the loudspeaker used. This paper presents a comprehensive analysis of the test geometry for measuring sound insulation and explains how the loudspeaker directivity, combined with distance, affects the acoustic level distribution on the façade. The first sections of the paper are focused on analysing the measurement geometry and its influence on the direct acoustic level variations on the façade. The most favourable and least favourable positions to minimise these direct acoustic level differences are found, and the angles covered by the façade in the reference system of the loudspeaker are also determined. Then, the maximum dimensions of the façade that meet the conditions of the ISO 140-5 standard are obtained for the ideal omnidirectional sound source and the piston radiating in an infinite baffle, which is chosen as the typical radiation pattern for loudspeakers. Finally, a complete study of the behaviour of different loudspeaker radiation models (such as those usually utilised in the ISO 140-5 measurements) is performed, comparing their radiation maps on the façade for searching their maximum dimensions and the most appropriate radiation configurations.

Architectural guidelines for the Curricula: 3 Layers, 3 New Dimensions, 2 Basic Orientations, Different levels in the Topics

Today, designing informatics curricula is a major problem. As a technology, informatics is experiencing a dramatic evolution, with its rapidly expanding areas of application and everincreasing impact on society. At first glance, it seems that if we might need several different curricula for facing very different practical educational situations, and not just one or two curricula. The current deep discrepancies among some of our more prestigious computer scientists in relation to the focus of informatics education are in fact a form of recognition of this necessity and at the same time, proof we are at a turning point.

Experimental and numerical investigation of effect of sawn timber dimensions in ultrasonic velocity measurements of Spanish softwoods

Ultrasonic sound velocity measurements with hand-held equipment remain due to their simplicity among the most used methods for non-destructive grading of sawn woods, yet a dedicated normalization effort with respect to strength classes for Spanish species is still required. As part of an ongoing project with the aim of definition of standard testing methods, the effect of the dimensions of commonly tested Scots pine (Pinus sylvestris L.) timbers and equipment testing frequency on ultrasonic velocity were investigated. A dedicated full-wave finite-difference time-domain software allowed simulation of pulse propagation through timbers of representative length and section combinations. Sound velocity measurements vL were performed along the grain with the indirect method at 22 kHz and 45 kHz for grids of measurement points at specific distances. For sample sections larger than the cross-sectional wavelength ?RT, the simulated sound velocity vL converges to vL = (CL/?)0.5. For smaller square sections the sound velocity drops down to vL = (EL/?)0.5, where CL, EL and ? are the stiffness, E-modul and density, respectively. The experiments confirm a linear regression between time of flight and measurement distance even at less than two wavelength menor que2?L distance, the fitted sound speed values increased by 15% between the two tested frequencies.

Dendrogeomorphological research applied to flood hazard analysis in the Caldera de Taburiente National Park (La Palma, Canary Islands, Spain).

Se ha realizado un estudio dendrogeomorfológico utilizando las heridas de los árboles como indicadores de paleoinundaciones.

Knowledge Modelling in Multiagent Systems: The Case of the Management of a National Network

This paper presents the knowledge model of a distributed decision support system, that has been designed for the management of a national network in Ukraine. It shows how advanced Artificial Intelligence techniques (multiagent systems and knowledge modelling) have been applied to solve this real-world decision support problem: on the one hand its distributed nature, implied by different loci of decision-making at the network nodes, suggested to apply a multiagent solution; on the other, due to the complexity of problem-solving for local network administration, it was useful to apply knowledge modelling techniques, in order to structure the different knowledge types and reasoning processes involved. The paper sets out from a description of our particular management problem. Subsequently, our agent model is described, pointing out the local problem-solving and coordination knowledge models. Finally, the dynamics of the approach is illustrated by an example.

La iglesia de Santiago de los españoles en Roma y su entorno entre los siglos XV y XIX. Una historia a través del dibujo

Plaza Navona representa una de las visitas obligadas de Roma, pero solo algunos advertirán en ella la presencia española en la sala de exposiciones del Instituto Cervantes o en la inmediata Libreria Española. Todavía serán menos los que se percatarán de la huella española dejada en aquella iglesia de fachada anónima situada, en el extremo sur de la plaza: la antigua iglesia de Santiago de los Españoles. La presente tesis pretende, utilizando el dibujo como guía, herramienta y fin del proceso de análisis y estudio, reconstruir el proceso de conformación y construcción de la que fue iglesia española principal, cuya fundación hace patente el destacado papel jugado por la “nación” castellana en Roma durante la Edad Media; y en torno a la que se aglutinaron las actividades religiosas, diplomáticas y financieras de los castellanos que vivieron en la actual capital italiana. Se intentará recrear en el tiempo la que es hoy la iglesia de Nuestra Señora del Sagrado Corazón, sometiéndola a una restitución gráfica disciplinada, homogénea y objetiva en la medida de lo posible de las varias etapas que la han caracterizadas, desde su fundación hasta cuando en 1878 España se deshizo de ella, ya en ruina, vendiéndola. Como nos comenta Gaetano Moroni, de todas las comunidades nacionales que se encontraban en Roma la española parece ser efectivamente una de las más rica y prestigiosa. Aunque lo que no cuenta Moroni no haya sido todavía demostrado, dicho enunciado resulta de todas formas interesante puesto que pone el acento sobre el hecho de que ya desde el siglo X parece ser habitual de ocupar y reutilizar antiguas ruinas, usándolas como base para la construcción de hospitales para los peregrinos. Esta operación se hizo particularmente frecuente sobre todo antes del Gran Jubileo de 1450: de hecho desde la primera mitad del Quattrocento se fundan distintas iglesias y hospitales nacionales para acoger y prestar una adecuada asistencia y socorro a los innumerables peregrinos que llegaban a la ciudad, edificios que se van construyendo sobre los restos de antiguos edificios de época romana. Prueba de ello es en efecto la fundación originaria de la iglesia y hospital de los Españoles que, parte del conjunto de edificios que compone la Plaza Navona, situada en el corazón de Campo Marzio y cuya posición y forma corresponden a la del antiguo Estadio de Domiciano, y que ahora es en sus dimensiones, en su imagen arquitectónica y en su consistencia material, el resultado de la definición proyectual y de las transformaciones que se llevaron a cabo sobre lo que quedaba del antiguo templo español del siglo XV, entre finales del ‘800 y los años 30 del siglo XX . Transformaciones devastadoras, huellas grabadas o canceladas que encuentran una justificación en los acontecimientos históricos reflejados en el patrimonio urbano. El análisis de todas las fuentes permite trazar, si no la totalidad, buena parte de las modificaciones que la antigua iglesia de Santiago ha sufrido. La construcción del templo se puede dividir en tres momentos decisivos: una primera etapa de fundación en 1450-1478 en la que la iglesia tenía fachada y entrada en via de la Sapienza, hoy Corso Rinascimento; una segunda de significativa ampliación hacia Plaza Navona con una nueva fachada monumental hacia ese espacio público en 1496-1500; y una última importante ampliación entre 1525-1526, llevada a cabo por el arquitecto Antonio da Sangallo el Joven. Tras la intensa vida del templo, en el siglo XVIII, éste cae en ruina y finalmente es vendido en 1878 a la orden de los misioneros franceses de Nuestra Señora del Sagrado Corazón que la reconvierten en iglesia reformando totalmente el conjunto en 1881, según proyecto de Luca Carimini. En 1936, en plena fase de rectificación de trazados urbanos por obra del régimen fascista, según proyecto de Arnaldo Foschini, se mutila su extremidad hacia vía de la Sapienza dejando su estado tal y como se contempla en la actualidad. ABSTRACT The objective of this thesis is the reconstruction of the design and edification process -using drawings and sketches as a guide, tool and the end of the analytical process- of a church which was once the preeminent Spanish church in medieval Rome, known today as Nostra Signora del Sacro Cuore (Our Lady of the Sacred Heart). The founding of this church illustrates the important role held by the Castillian “nation” in Rome during the Middle Ages. It was the focal point of all the religious, diplomatic and economic activities of the Castillian community residing in today’s Italian capital. The aim of this proyect is a recreation the church in time by submitting it to a disciplined, homogenous and objective graphic restitution of the various stages most characteristic the temple, starting from its foundation until 1878 when, in a state of ruins, the church was finally sold off by Spain. Gaetano Moroni once commented that of all the international communities found in Rome, the Spanish community seemed to be one of the wealthiest and most prestigious. Such a statement proves interesting as it emphasizes that starting in the 10th century we see there was a widespread custom of occupying and reusing old ruins for use as the bases of new constructions of hospitals for pilgrims. This custom became especially frequent just before the Jubilee Year of 1450: in fact, in the first half of the Quattrocento we see the founding of many different national churches and hospitals which provided shelter and care to the countless pilgrims arriving in the city, buildings which were constructed on top of the ruins of ancient buildings left over from Roman times. Proof of this is the original foundation of the Spanish church and hospital forming part of the Piazza Navona, built upon and following the outline of the Stadium of Domitian, in the heart of Campo Marzio. Now, in its dimensions, its architectural image and its material substance, it represents the predominant result of the planning definitions and the transformations which affected the old 15th-century Spanish temple. Ocurring between the end of the 19th century and the 1930s, the transformations were devastating, erasing original peculiarities and engraving new ones, transformations made justifiable by the historical events reflected in its urban environs. Analyzing all sources allows us to trace, even if not in entirety, still a sizeable portion of the modifications undergone by the old Church of Saint James. The construction of the temple can be divided into three decisive moments: its foundation, from 1450 to 1478, when the church’s façade and main door looked out on to the Via della Sapienza, today’s central avenue of Corso del Rinascimento; the second stage being a major expansion towards the Piazza Navona (1496-1500) with a new, monumental façade facing the public space; and the third was the last significant expansion, carried out from 1525 to 1526 by the architect Antonio da Sangallo the Younger. Despite an intense and bustling life during the Modern Age, in the 18th century the church began to fall into ruin and was finally sold in 1878 to the order of French missionaries of Our Lady of the Sacred Heart, who reconverted it into a church and completely renovated the structure in 1881 in a project supervised by Luca Carimini. In 1936, the corrective urban redesign of Rome carried out by the fascist regime and implemented by Arnaldo Foschini mutilated the part bordering Via della Sapienza, leaving it as we see it today.

Self perception of decision making competence in spanish football players

Background: It is known that competence to make decisions is a fundamental aspect of sport competition. Objective: This study has analyzed the decision profile of a sample of Spanish football players of different levels of expertise. Methods: 690 Spanish football players of national and international level completed the decision making questionnaire, which cover three dimensions ? perceived decision competence, decision anxiety and commitment with decision learning. MANCOVA and ANOVA analysis were carried out to analyse the differences in each dimension based on the level of expertise. Results: Results showed that perception of decision making competence increased and the anxiety decreased with the level of expertise. Conclusions: This study confirmed the usefulness of this questionnaire in the process of training for coaches and sport psychologists.

The Use of Patents to Assess National Innovation Systems: Evidences from Spanish Biotechnology

Spain’s economy recorded a high rate of growth from the mid-1990s onwards. At the same time, the resources allocated to Research and Development (R&D) grew at a much faster pace than in other European Union (EU) countries. Spain’s growth recorded an average rate of 2.93% from the early 1990s to 2004. Over the same period, the average growth in the EU was 0.46%. This circumstance, together with several sound policy decisions implemented between 2004 and 2009, ushered in a “golden age of Spanish biotechnology”. In terms of the national patent licenses issued by the Spanish Patent and Trademark Office (SPTO) between 2004 and 2009, the number in biotechnology grew from 84 to 151. However, the current economic situation in Spain, along with a series of political decisions taken over the past two or three years to cut spending on R&D, predicts a sharp downturn in the performance of Spanish biotechnology. This scenario makes Spain one of the best places to study the successes and failures of the management of science and allows transfer this experience to the other international regions. We need to analyze the influence of political decisions as a major factor with a bearing on the quality of science. Using patents as an indicator of scientific development, this paper analyzes the evolution of the biotechnology sector in Spain and its relationship with scientific policy and the management of R&D.

Self-perceptions of decision making competence in Spanish football players

Background: It is known that competence to make decisions is a fundamental aspect of sport competition. Objective: This study has analyzed the decision profile of a sample of Spanish football players of different levels of expertise. Methods: 690 Spanish football players of national and international level completed the decision mak- ing questionnaire, which cover three dimensions ? perceived decision competence, decision anxiety and commit- ment with decision learning. MANCOVA and ANOVA analysis were carried out to analyse the differences in each dimension based on the level of expertise. Results: Results showed that perception of decision making competence increased and the anxiety decreased with the level of expertise. Conclusions: This study confirmed the usefulness of this questionnaire in the process of training for coaches and sport psychologists.