A regular perturbation approach to surface tension driven flows

Surface tension induced convection in a liquid bridge held between two parallel, coaxial, solid disks is considered. The surface tension gradient is produced by a small temperature gradient parallel Co the undisturbed surface. The study is performed by using a mathematical regular perturbation approach based on a small parameter, e, which measures the deviation of the imposed temperature field from its mean value. The first order velocity field is given by a Stokes-type problem (viscous terms are dominant) with relatively simple boundary conditions. The first order temperature field is that imposed from the end disks on a liquid bridge immersed in a non-conductive fluid. Radiative effects are supposed to be negligible. The second order temperature field, which accounts for convective effects, is split into three components, one due to the bulk motion, and the other two to the distortion of the free surface. The relative importance of these components in terms of the heat transfer to or from the end disks is assessed

Gene Expression Profiling in Limb-Girdle Muscular Dystrophy 2A

Limb-girdle muscular dystrophy type 2A (LGMD2A) is a recessive genetic disorder caused by mutations in calpain 3 (CAPN3). Calpain 3 plays different roles in muscular cells, but little is known about its functions or in vivo substrates. The aim of this study was to identify the genes showing an altered expression in LGMD2A patients and the possible pathways they are implicated in. Ten muscle samples from LGMD2A patients with in which molecular diagnosis was ascertained were investigated using array technology to analyze gene expression profiling as compared to ten normal muscle samples. Upregulated genes were mostly those related to extracellular matrix (different collagens), cell adhesion (fibronectin), muscle development (myosins and melusin) and signal transduction. It is therefore suggested that different proteins located or participating in the costameric region are implicated in processes regulated by calpain 3 during skeletal muscle development. Genes participating in the ubiquitin proteasome degradation pathway were found to be deregulated in LGMD2A patients, suggesting that regulation of this pathway may be under the control of calpain 3 activity. As frizzled-related protein (FRZB) is upregulated in LGMD2A muscle samples, it could be hypothesized that β-catenin regulation is also altered at the Wnt signaling pathway, leading to an incorrect myogenesis. Conversely, expression of most transcription factor genes was downregulated (MYC, FOS and EGR1). Finally, the upregulation of IL-32 and immunoglobulin genes may induce the eosinophil chemoattraction explaining the inflammatory findings observed in presymptomatic stages. The obtained results try to shed some light on identification of novel therapeutic targets for limb-girdle muscular dystrophies

Protocolo de recuperación y reentrenamiento de un jugador de fútbol profesional con una rotura muscular de sóleo.

En el fútbol profesional, la exigencia a la que están sometidos los deportistas y su perseverancia para aumentar el rendimiento ha incrementado considerablemente la incidencia de lesiones. En concreto, son especialmente frecuentes las lesiones musculares. Este trabajo tiene como objetivo el estudio y análisis del protocolo aplicado a un jugador de fútbol profesional de la Primera División Española quien sufre una lesión muscular durante la temporada 2011/2012. Desde el momento en que se produce la lesión se inicia un trabajo paralelo de tratamiento, rehabilitación y readaptación del deportista a la competición. En este proceso interviene un grupo de profesionales especializados en diferentes áreas interrelacionadas dentro de las ciencias del deporte que componen un equipo de trabajo multidisciplinar, destacando la figura del preparador físico en su papel de readaptador. Se estudian las técnicas empleadas para la recuperación funcional y reentrenamiento al esfuerzo antes de la reincorporación progresiva a los entrenamientos, analizando con especial atención los métodos y protocolos empleados por el readaptador en todas las fases de la temporada, tanto a nivel preventivo como terapéutico.

Damage mechanisms of 3D woven hybrid composites in tension. Testing, inspection and simulation

Delamination reduces the strenght of the composites, mainly in compression. Several methods exist to overcome this problem, but they are either not feasible for large scale production or too expensive. 3D composites are a promising solution.

Surface tension and microgravity

The behaviour of confined liquids on board an orbiting spacecraft is mainly driven by surface tension phenomena, which cause an apparently anomalous response of the liquid when compared with the behaviour that can be observed on an Earth laboratory provided that the amount of liquid is high enough. The reason is that in an orbiting spacecraft the different inertial forces acting on the bulk of the liquid are almost zero, causing thus capillary forces to be the dominant ones. Of course, since gravity forces are proportional to the liquid volume, whereas surface tension forces are proportional to the liquid surface, there are situations on Earth where capillarity can be the dominant effect, as it happens when very small volume liquid samples are considered. However, work with small size samples may require the use of sophisticated optical devices. Leaving aside the neutral buoyancy technique, a way of handling large liquid interfaces is by using drop towers, where the sample falls subjected to the action of Earth's gravity. This approach is suitable when the characteristic time of the problem under consideration is much smaller than the drop time. In this work the transformation of an out-of-use chimney into a drop tower is presented. Because of the miniaturization, hardiness and low cost of current electronic devices, a drop tower can be used as an inexpensive tool for undergraduate students to experimentally analyse a large variety of surface tension driven phenomena.

Mechanical behavior and failure micromechanisms of hybrid 3D woven composites in tension

The deformation and failure micromechanisms of a hybrid 3D woven composite were studied in tension. Plain and open-hole composite coupons were tested in tension until failure in the fill and warp directions, as well as fiber tows extracted from the dry fabric and impregnated with the matrix. The macroscopic evolution of damage in the composite coupons was assessed by means of periodic unloading–reloading (to obtain the elastic modulus and the residual strain), whereas the microscopic mechanism were established by means of X-ray computed microtomography. To this end, specimens were periodically removed from the mechanical testing machine and infiltrated with ZnI-containing liquid to assess the main damage modes as a function of the applied strain. The experimental observations and the predictions of an isostrain model were used to understand the key factors controlling the elastic modulus, strength and notch sensitivity of hybrid 3D woven composites in tension. It was found that the full contribution of the glass fibers to the composite strength was not employed, due to the premature fracture of the carbon fibers, but their presence increased the fracture strain and the energy dissipated during fracture. Thus, hybridization of the 3D woven composite led to a notch-insensitive behavior as demonstrated by open-hole tests

Disjoining pressure and the film-height-dependent surface tension of thin liquid films: New insight from capillary wave fluctuations

In this paper we review simulation and experimental studies of thermal capillary wave fluctuations as an ideal means for probing the underlying disjoining pressure and surface tensions, and more generally, fine details of the Interfacial Hamiltonian Model. We discuss recent simulation results that reveal a film-height-dependent surface tension not accounted for in the classical Interfacial Hamiltonian Model. We show how this observation may be explained bottom-up from sound principles of statistical thermodynamics and discuss some of its implications

Programa de entrenamiento de hipertrofia muscular para un jugador de baloncesto en postemporada

El trabajo pretende mostrar la planificación, programación y periodización de un programa de entrenamiento para el desarrollo de la hipertrofia muscular en un jugador de baloncesto en postemporada. El objeto para el desarrollo de esta propuesta teórica es un jugador con un perfil joven, cuya experiencia en la liga ACB de baloncesto es de aproximadamente un año. El objetivo para este jugador es la ganancia de masa muscular durante la postemporada, es decir, durante el periodo comprendido entre el final de una temporada y el comienzo de la pretemporada de la temporada siguiente.

Readaptación funcional y prevención de la rotura muscular en el aductor medio en futbolistas

Introducción: La incidencia lesional en el fútbol está muy documentada. Dentro de todas las lesiones, las musculares son las que presentan mayor incidencia, dentro de ellas, las que se refieren al aductor medio, ocupan el segundo lugar, sólo por detrás de las lesiones en los isquiotibiales. Objetivo: diseñar y aplicar un programa de readaptación para una rotura muscular de grado II en el aductor mediano, asegurando la completa recuperación del jugador y evitando posibles recidivas futuras.