Análisis de los factores de influencia en la adopción de herramientas colaborativas basadas en software social. Aplicación a entornos empresariales

En las últimas dos décadas, se ha puesto de relieve la importancia de los procesos de adquisición y difusión del conocimiento dentro de las empresas, y por consiguiente el estudio de estos procesos y la implementación de tecnologías que los faciliten ha sido un tema que ha despertado un creciente interés en la comunidad científica. Con el fin de facilitar y optimizar la adquisición y la difusión del conocimiento, las organizaciones jerárquicas han evolucionado hacia una configuración más plana, con estructuras en red que resulten más ágiles, disminuyendo la dependencia de una autoridad centralizada, y constituyendo organizaciones orientadas a trabajar en equipo. Al mismo tiempo, se ha producido un rápido desarrollo de las herramientas de colaboración Web 2.0, tales como blogs y wikis. Estas herramientas de colaboración se caracterizan por una importante componente social, y pueden alcanzar todo su potencial cuando se despliegan en las estructuras organizacionales planas. La Web 2.0 aparece como un concepto enfrentado al conjunto de tecnologías que existían a finales de los 90s basadas en sitios web, y se basa en la participación de los propios usuarios. Empresas del Fortune 500 –HP, IBM, Xerox, Cisco– las adoptan de inmediato, aunque no hay unanimidad sobre su utilidad real ni sobre cómo medirla. Esto se debe en parte a que no se entienden bien los factores que llevan a los empleados a adoptarlas, lo que ha llevado a fracasos en la implantación debido a la existencia de algunas barreras. Dada esta situación, y ante las ventajas teóricas que tienen estas herramientas de colaboración Web 2.0 para las empresas, los directivos de éstas y la comunidad científica muestran un interés creciente en conocer la respuesta a la pregunta: ¿cuáles son los factores que contribuyen a que los empleados de las empresas adopten estas herramientas Web 2.0 para colaborar? La respuesta a esta pregunta es compleja ya que se trata de herramientas relativamente nuevas en el contexto empresarial mediante las cuales se puede llevar a cabo la gestión del conocimiento en lugar del manejo de la información. El planteamiento que se ha llevado a cabo en este trabajo para dar respuesta a esta pregunta es la aplicación de los modelos de adopción tecnológica, que se basan en las percepciones de los individuos sobre diferentes aspectos relacionados con el uso de la tecnología. Bajo este enfoque, este trabajo tiene como objetivo principal el estudio de los factores que influyen en la adopción de blogs y wikis en empresas, mediante un modelo predictivo, teórico y unificado, de adopción tecnológica, con un planteamiento holístico a partir de la literatura de los modelos de adopción tecnológica y de las particularidades que presentan las herramientas bajo estudio y en el contexto especifico. Este modelo teórico permitirá determinar aquellos factores que predicen la intención de uso de las herramientas y el uso real de las mismas. El trabajo de investigación científica se estructura en cinco partes: introducción al tema de investigación, desarrollo del marco teórico, diseño del trabajo de investigación, análisis empírico, y elaboración de conclusiones. Desde el punto de vista de la estructura de la memoria de la tesis, las cinco partes mencionadas se desarrollan de forma secuencial a lo largo de siete capítulos, correspondiendo la primera parte al capítulo 1, la segunda a los capítulos 2 y 3, la tercera parte a los capítulos 4 y 5, la cuarta parte al capítulo 6, y la quinta y última parte al capítulo 7. El contenido del capítulo 1 se centra en el planteamiento del problema de investigación así como en los objetivos, principal y secundarios, que se pretenden cumplir a lo largo del trabajo. Así mismo, se expondrá el concepto de colaboración y su encaje con las herramientas colaborativas Web 2.0 que se plantean en la investigación y una introducción a los modelos de adopción tecnológica. A continuación se expone la justificación de la investigación, los objetivos de la misma y el plan de trabajo para su elaboración. Una vez introducido el tema de investigación, en el capítulo 2 se lleva a cabo una revisión de la evolución de los principales modelos de adopción tecnológica existentes (IDT, TRA, SCT, TPB, DTPB, C-TAM-TPB, UTAUT, UTAUT2), dando cuenta de sus fundamentos y factores empleados. Sobre la base de los modelos de adopción tecnológica expuestos en el capítulo 2, en el capítulo 3 se estudian los factores que se han expuesto en el capítulo 2 pero adaptados al contexto de las herramientas colaborativas Web 2.0. Con el fin de facilitar la comprensión del modelo final, los factores se agrupan en cuatro tipos: tecnológicos, de control, socio-normativos y otros específicos de las herramientas colaborativas. En el capítulo 4 se lleva a cabo la relación de los factores que son más apropiados para estudiar la adopción de las herramientas colaborativas y se define un modelo que especifica las relaciones entre los diferentes factores. Estas relaciones finalmente se convertirán en hipótesis de trabajo, y que habrá que contrastar mediante el estudio empírico. A lo largo del capítulo 5 se especifican las características del trabajo empírico que se lleva a cabo para contrastar las hipótesis que se habían enunciado en el capítulo 4. La naturaleza de la investigación es de carácter social, de tipo exploratorio, y se basa en un estudio empírico cuantitativo cuyo análisis se llevará a cabo mediante técnicas de análisis multivariante. En este capítulo se describe la construcción de las escalas del instrumento de medida, la metodología de recogida de datos, y posteriormente se presenta un análisis detallado de la población muestral, así como la comprobación de la existencia o no del sesgo atribuible al método de medida, lo que se denomina sesgo de método común (en inglés, Common Method Bias). El contenido del capítulo 6 corresponde al análisis de resultados, aunque previamente se expone la técnica estadística empleada, PLS-SEM, como herramienta de análisis multivariante con capacidad de análisis predictivo, así como la metodología empleada para validar el modelo de medida y el modelo estructural, los requisitos que debe cumplir la muestra, y los umbrales de los parámetros considerados. En la segunda parte del capítulo 6 se lleva a cabo el análisis empírico de los datos correspondientes a las dos muestras, una para blogs y otra para wikis, con el fin de validar las hipótesis de investigación planteadas en el capítulo 4. Finalmente, en el capítulo 7 se revisa el grado de cumplimiento de los objetivos planteados en el capítulo 1 y se presentan las contribuciones teóricas, metodológicas y prácticas derivadas del trabajo realizado. A continuación se exponen las conclusiones generales y detalladas por cada grupo de factores, así como las recomendaciones prácticas que se pueden extraer para orientar la implantación de estas herramientas en situaciones reales. Como parte final del capítulo se incluyen las limitaciones del estudio y se sugiere una serie de posibles líneas de trabajo futuras de interés, junto con los resultados de investigación parciales que se han obtenido durante el tiempo que ha durado la investigación. ABSTRACT In the last two decades, the relevance of knowledge acquisition and dissemination processes has been highlighted and consequently, the study of these processes and the implementation of the technologies that make them possible has generated growing interest in the scientific community. In order to ease and optimize knowledge acquisition and dissemination, hierarchical organizations have evolved to a more horizontal configuration with more agile net structures, decreasing the dependence of a centralized authority, and building team-working oriented organizations. At the same time, Web 2.0 collaboration tools such as blogs and wikis have quickly developed. These collaboration tools are characterized by a strong social component and can reach their full potential when they are deployed in horizontal organization structures. Web 2.0, based on user participation, arises as a concept to challenge the existing technologies of the 90’s which were based on websites. Fortune 500 companies – HP, IBM, Xerox, Cisco- adopted the concept immediately even though there was no unanimity about its real usefulness or how it could be measured. This is partly due to the fact that the factors that make the drivers for employees to adopt these tools are not properly understood, consequently leading to implementation failure due to the existence of certain barriers. Given this situation, and faced with theoretical advantages that these Web 2.0 collaboration tools seem to have for companies, managers and the scientific community are showing an increasing interest in answering the following question: Which factors contribute to the decision of the employees of a company to adopt the Web 2.0 tools for collaborative purposes? The answer is complex since these tools are relatively new in business environments. These tools allow us to move from an information Management approach to Knowledge Management. In order to answer this question, the chosen approach involves the application of technology adoption models, all of them based on the individual’s perception of the different aspects related to technology usage. From this perspective, this thesis’ main objective is to study the factors influencing the adoption of blogs and wikis in a company. This is done by using a unified and theoretical predictive model of technological adoption with a holistic approach that is based on literature of technological adoption models and the particularities that these tools presented under study and in a specific context. This theoretical model will allow us to determine the factors that predict the intended use of these tools and their real usage. The scientific research is structured in five parts: Introduction to the research subject, development of the theoretical framework, research work design, empirical analysis and drawing the final conclusions. This thesis develops the five aforementioned parts sequentially thorough seven chapters; part one (chapter one), part two (chapters two and three), part three (chapters four and five), parte four (chapters six) and finally part five (chapter seven). The first chapter is focused on the research problem statement and the objectives of the thesis, intended to be reached during the project. Likewise, the concept of collaboration and its link with the Web 2.0 collaborative tools is discussed as well as an introduction to the technology adoption models. Finally we explain the planning to carry out the research and get the proposed results. After introducing the research topic, the second chapter carries out a review of the evolution of the main existing technology adoption models (IDT, TRA, SCT, TPB, DTPB, C-TAM-TPB, UTAUT, UTAUT2), highlighting its foundations and factors used. Based on technology adoption models set out in chapter 2, the third chapter deals with the factors which have been discussed previously in chapter 2, but adapted to the context of Web 2.0 collaborative tools under study, blogs and wikis. In order to better understand the final model, the factors are grouped into four types: technological factors, control factors, social-normative factors and other specific factors related to the collaborative tools. The first part of chapter 4 covers the analysis of the factors which are more relevant to study the adoption of collaborative tools, and the second part proceeds with the theoretical model which specifies the relationship between the different factors taken into consideration. These relationships will become specific hypotheses that will be tested by the empirical study. Throughout chapter 5 we cover the characteristics of the empirical study used to test the research hypotheses which were set out in chapter 4. The nature of research is social, exploratory, and it is based on a quantitative empirical study whose analysis is carried out using multivariate analysis techniques. The second part of this chapter includes the description of the scales of the measuring instrument; the methodology for data gathering, the detailed analysis of the sample, and finally the existence of bias attributable to the measurement method, the "Bias Common Method" is checked. The first part of chapter 6 corresponds to the analysis of results. The statistical technique employed (PLS-SEM) is previously explained as a tool of multivariate analysis, capable of carrying out predictive analysis, and as the appropriate methodology used to validate the model in a two-stages analysis, the measurement model and the structural model. Futhermore, it is necessary to check the requirements to be met by the sample and the thresholds of the parameters taken into account. In the second part of chapter 6 an empirical analysis of the data is performed for the two samples, one for blogs and the other for wikis, in order to validate the research hypothesis proposed in chapter 4. Finally, in chapter 7 the fulfillment level of the objectives raised in chapter 1 is reviewed and the theoretical, methodological and practical conclusions derived from the results of the study are presented. Next, we cover the general conclusions, detailing for each group of factors including practical recommendations that can be drawn to guide implementation of these tools in real situations in companies. As a final part of the chapter the limitations of the study are included and a number of potential future researches suggested, along with research partial results which have been obtained thorough the research.

Variation of PM2.5 concentrations in relation to street washing activities

Several studies conducted in urban areas have pointed out that road dust resuspension contributes significantly to PM concentration levels. Street washing is one of the methods proposed to reduce resuspended road dust contributions to ambient PM concentrations. As resuspended particles are mainly found in the coarse mode, published studies investigating the effects of street washing have focused on PM10 size fraction. As the PM2.5 mass fraction of particles originating from mechanical abrasion processes may still be significant we conducted a study in order to evaluate the effects of street washing on the mitigation of resuspension of fine particles. The PM2.5 mass concentration data were examined and integrated with the occurrence of street washing activities. In addition, the effect of the meteorological variability, traffic flow and street washing activities, on ambient PM2.5 levels was valuated by means of a multivariate regression model. The results revealed that traffic low is the most important factor that controls PM2.5 hourly concentrations while street washing activities did not influence fine particle mass levels.

Diseño metodológico para la creación y desarrollo de organizaciones innovadoras, basadas en un modelo de liderazgo que genere entornos facilitadores de la creatividad, implantación de procesos de innovación y creación de productos y servicios innovadores

La presente investigación tiene como objetivo el desarrollo de una metodología que favorezca la innovación en las empresas a través de la actividad directiva, analizando a su vez, su influencia a nivel macro, en los sistemas de innovación, en las políticas de innovación y en el capital intelectual y a nivel micro, en la innovación, en el desempeño y en el clima organizacional. Se estima importante realizar un estudio sobre este tema debido a que la innovación se considera un pilar crítico para el desarrollo social a través de la competitividad de las empresas, así como, una fuente importante de ventaja competitiva. Existe abundante literatura sobre la influencia de la innovación en la gestión empresarial y el papel que el liderazgo desempeña en términos generales. Sin embargo, la literatura presenta diversos estilos de liderazgo sin mostrar una línea consistente de interrelación entre ellos, por lo que finalmente no existe una relación sólida entre el liderazgo, la gestión empresarial y la innovación. Este hecho se debe, como se muestra en la tesis, a que la literatura analiza las organizaciones y el liderazgo desde una perspectiva sociológica u organizacional, y otra desde la perspectiva psicológica sin aportar una línea de articulación entre ambas. Es decir, la literatura analiza el comportamiento organizacional pero no su causa. A lo largo de la tesis se van desarrollando diferentes líneas de trabajo que se convierten en aportaciones empíricas y académicas. Así, una de las aportaciones de la tesis es la sustitución de la figura del líder como persona, por la de un directivo con una doble función; por un lado, la función de liderazgo cuyo objetivo es generar cambio y por el otro, la función de gestionar el día a día o desempeño. Sustituir la figura del líder por una doble funcionalidad directiva facilita la comprensión del concepto liderazgo, lo que permite a su vez, establecer estrategias para su desarrollo, haciendo una realidad el que el liderazgo puede ser aprendido. Este resultado constituye la primera aportación de la tesis. Así mismo, a través de un exhaustivo análisis de la literatura, se desarrolla una propuesta de liderazgo integrado de acuerdo con el modelo Stuart-Kotze, el cual se describe también ampliamente. Encontrar un modelo único de liderazgo supone la piedra angular para el desarrollo de la metodología. Esta propuesta de liderazgo integrado da lugar a la segunda aportación de la tesis. Del mismo modo, se realiza un estudio en profundidad de la perspectiva psicológica de las organizaciones desarrollando el constructo Miedo al Error (ME) que resulta ser un rasgo de la personalidad existente en todos los seres humanos y que presenta una influencia negativa tanto en el desempeño, como en la innovación empresarial. Este resultado permite identificar cuales son las verdaderas barreras para el ejercicio del liderazgo, señalando que la disminución del ME debe ser considerada como una competencia de la Inteligencia Emocional a ser desarrollada por los directivos. Este resultado constituye la tercera aportación de la tesis. Una vez desarrollado el modelo de gestión empresarial expuesto, se procede a su validación, analizando la relación entre los constructos que definen el modelo de gestión: el desempeño, la innovación y el ME. Para identificar las influencias o relaciones de causalidad que subyacen entre los constructos, se utilizó la técnica del modelo de ecuaciones estructurales (SEM). La población objeto de estudio estuvo constituida por 350 profesionales con responsabilidad directiva, procedentes de empresas del sector servicios repartidas por toda la geografía española. Como fuente primaria de recolección de información se utilizó el cuestionario desarrollado por Stuart-Kotze M-CPI (Momentum Continuous Performance Improvement). En primer lugar se procedió a evaluar las propiedades psicométricas del modelo de medida, llevándose a cabo un análisis factorial exploratorio (AFE) y un análisis factorial confirmatorio (AFC) de segundo orden. Los resultados obtenidos ponen de manifiesto que el constructo desempeño (D) viene determinado por dos dimensiones, (DOP), desempeño orientado hacia la planificación y (DORT), desempeño orientado hacia la realización de la tarea. Es decir, la muestra de directivos no percibe que la planificación en el día a día y la realización de la tarea estén articuladas. Posteriormente se procede a realizar el contraste del modelo a través del método de ecuaciones estructurales. Los resultados muestran que la relación de influencia de la dimensión DOP no es significativa, por lo que el constructo D queda representado únicamente por la dimensión DORT. Los resultados de la investigación proporcionan conclusiones e hipótesis para futuras investigaciones. Si bien la muestra de directivos realiza un plan estratégico, éste no se tiene en cuenta en el día a día. Este hecho podría explicar el alto grado de administración por crisis tan frecuente en la empresa española. A su vez, el ME presenta una influencia negativa en la innovación, lo que concuerda con la literatura. Al respecto, considerar el ME como un rasgo de la personalidad, presente tanto en directivos como en colaboradores, facilita la comprensión de las barreras de la organización hacia la comunicación abierta a la vez, que una dirección de trabajo para la mejora de la capacidad innovadora de la organización. Por último, los resultados establecen la existencia de una relación causal entre el desempeño diario y la innovación. Con respecto a este segundo resultado y analizando los comportamientos que identifican el constructo D surgen también varias conclusiones e hipótesis para futuras investigaciones. Los resultados ponen de manifiesto que la muestra de directivos genera iniciativas de cambio con la finalidad de que el trabajo diario salga adelante según los estándares de calidad definidos. Sin embargo, estas iniciativas sólo proceden de los directivos, sin participación alguna de los colaboradores, los cuales son sólo responsables de la implementación produciéndose la consiguiente desmotivación y pérdida de oportunidades. Esta conclusión pone de manifiesto que la innovación de las empresas de la muestra sucede para garantizar la eficiencia de los procesos existentes, pero en ningún caso surge de la iniciativa de buscar una mejor eficacia empresarial. Este hecho plantea un origen doble de la innovación en los procesos. La innovación proactiva que buscaría la mejora de la eficacia de la organización y una innovación de carácter reactiva que buscaría la salvaguarda de la eficiencia. Quizás sea esta la causa del gap existente entre la innovación en España y la innovación de los países que ocupan los primeros puestos en el ranking de producción de innovación lo que constituye un importante punto de partida para una investigación futura. ABSTRACT This research aims to develop a methodology that supports innovation in companies through the managers’ activity, analysing in turn its influence at the macro level: innovation systems, innovation policies and Intellectual capital and at the micro level: innovation itself, performance and organizational climate. It is considered important to conduct a study on this subject due to the fact that innovation is considered a critical pillar for the development and future of the enterprise and an important source of competitive advantage. There is abundant literature about the influence of innovation in business management and the role that leadership plays in general terms. However, the literature presents various styles of leadership without showing a consistent relationship among them, so finally there is not a strong relationship among leadership, business management and innovation. As shown in the thesis, this is due to the fact that the literature analyses organizations and leadership from a sociological or organizational perspective and from a psychological perspective, without providing a hinge line between the two. That is, the existing literature discusses organizational behaviour but not its cause. Throughout the thesis, different lines of work that become empirical and academic contributions have been developed. Thus, one of the contributions of the thesis is replacing the figure of the leader as a person, by a manager with a dual function. Firstly, we have the leadership role which aims to generate change and, on the other hand, the function to manage the day-to-day task or performance. Replacing the figure of the leader by a dual managerial functionality facilitates the understanding of the leadership concept, allowing in turn, to establish development strategies and making true that leadership can be learned. This outcome is the first contribution of the thesis. Likewise, through a comprehensive literature review, an integrated leadership proposal is developed, according to the Kotze model, which is also described widely. Finding a specific leadership model represents the cornerstone for the development of the methodology. This integrated leadership proposal leads to the second contribution of the thesis. Similarly, an in-depth study was conducted about the psychological perspective of the organizations disclosing the construct Fear of Failure. This construct is a personality trait that exists in all human beings and has a negative influence on both performance and business innovation. This outcome allows identifying which are the real barriers to the exercise of leadership, noting that the decrease in fear of failure must be considered as an Emotional Intelligence competence to be developed by managers. This outcome represents the third contribution of the thesis. Once a business management model has been developed, we proceed to its validation by analysing the relationship among the model constructs: management, innovation and fear of failure. To identify the influence or causal relationships underlying the constructs, a structural equation model (SEM) technique was used. The study population consisted of 350 professionals with managerial responsibility, from companies in the services sector scattered throughout the Spanish geography. As a primary source for gathering information a questionnaire developed by Kotze M-CPI (Continuous Performance Improvement Momentum) was used. First we proceeded to evaluate the psychometric properties of the measurement model, carrying out an exploratory factorial analysis (EFA) and a confirmatory factorial analysis (CFA) of second order. The results show that the performance construct D is determined by two-dimensions (DOP: performance oriented to planning) and (DORT: aiming at the realization of the task). That is, the sample of managers does not perceive that planning and the daily task are articulated. Then, we proceeded to make the contrast of the model through a structural equation model SEM. The results show that the influence of the DOP dimension is not significant, so that only the DORT dimension finally represents the construct D. The research outcomes provide conclusions and hypotheses for future research. Although the managers in the sample develop a strategic plan, it seems that managers do not take it into account in their daily tasks. This could explain the high degree of crisis management so prevalent in the Spanish companies. In turn, the fear of failure has a negative influence on innovation, consistent with the literature. In this regard, the fear of failure is considered as a personality trait, present in both managers and employees, which enables the understanding of organizational barriers to open communication and provides a direction to improve the organization’s innovative capacity as well. Finally, the results establish a causal relationship between daily performance and innovation. Regarding this second outcome and analysing the behaviours that identify the construct D, several conclusions and hypotheses for future research arise as well. The results show that the managers in the sample show initiatives of change in order to make everyday work go ahead, according to defined quality standards. However, these initiatives only come from managers without any participation of coworkers, which are only responsible for the implementation, and this produces discouragement and loss of opportunities. This finding shows that the innovation by the companies in the sample happens to guarantee the efficiency of existing processes, but do not arise from an initiative that seeks better business efficacy. This raises two sources of innovation in processes. The first source would be a proactive innovation that would seek improved organizational efficacy. The second one is a reactive innovation that would seek to safeguard efficiency. Perhaps this is the cause of the existing gap between the innovation activity in Spain and the innovation activity in those countries that occupy the top positions in the ranking of innovation outcomes. The Spanish companies seek process efficiency and the top innovators business efficacy. This is an important starting point for future research.

Estimating the modal parameters from multiple measurement setups using a joint state space model

Computing the modal parameters of structural systems often requires processing data from multiple non-simultaneously recorded setups of sensors. These setups share some sensors in common, the so-called reference sensors, which are fixed for all measurements, while the other sensors change their position from one setup to the next. One possibility is to process the setups separately resulting in different modal parameter estimates for each setup. Then, the reference sensors are used to merge or glue the different parts of the mode shapes to obtain global mode shapes, while the natural frequencies and damping ratios are usually averaged. In this paper we present a new state space model that processes all setups at once. The result is that the global mode shapes are obtained automatically, and only a value for the natural frequency and damping ratio of each mode is estimated. We also investigate the estimation of this model using maximum likelihood and the Expectation Maximization algorithm, and apply this technique to simulated and measured data corresponding to different structures.

Power Measurement Methodology for FPGA Devices

The efficiency of power optimization tools depends on information on design power provided by the power estimation models. Power models targeting different power groups can enable fast identification of the most power consuming parts of design and their properties. The accuracy of these estimation models is highly dependent on the accuracy of the method used for their characterization. The highest precision is achieved by using physical onboard measurements. In this paper, we present a measurement methodology that is primarily aimed at calibrating and validating high-level dynamic power estimation models. The measurements have been carefully designed to enable the separation of the interconnect power from the logic power and the power of the clock circuitry, so that each of these power groups can be used for the corresponding model validation. The standard measurement uncertainty is lower than 2% of the measured value even with a very small number of repeated measurements. Additionally, the accuracy of a commercial low-level power estimation tool has been also assessed for comparison purposes. The results indicate that the tool is not suitable for power estimation of data path-oriented designs.

Noise Figure Measurement of Differential Amplifiers Using non-Ideal Baluns

This paper analyzes the noise and gain measurement of microwave differential amplifiers using two passive baluns. A general model of the baluns is considered, including potential losses and phase/amplitude unbalances. This analysis allows de-embedding the actual gain and noise performance of the isolated amplifier by using single-ended measurements of the cascaded system and baluns. Finally, measured results from two amplifier prototypes are used to validate the theoretical principles.

Considerations in Determining the Cost of Measurement Uncertainty Associated with Dimensional Tolerances Verification

The verification of compliance with a design specification in manufacturing requires the use of metrological instruments to check if the magnitude associated with the design specification is or not according with tolerance range. Such instrumentation and their use during the measurement process, has associated an uncertainty of measurement whose value must be related to the value of tolerance tested. Most papers dealing jointly tolerance and measurement uncertainties are mainly focused on the establishment of a relationship uncertainty-tolerance without paying much attention to the impact from the standpoint of process cost. This paper analyzes the cost-measurement uncertainty, considering uncertainty as a productive factor in the process outcome. This is done starting from a cost-tolerance model associated with the process. By means of this model the existence of a measurement uncertainty is calculated in quantitative terms of cost and its impact on the process is analyzed.

Measurement of Distributed Antenna Systems at 2.4 GHz in a Realistic Subway Tunnel Environment.

Accurate characterization of the radio channel in tunnels is of great importance for new signaling and train control communications systems. To model this environment, measurements have been taken at 2.4 GHz in a real environment in Madrid subway. The measurements were carried out with four base station transmitters installed in a 2-km tunnel and using a mobile receiver installed on a standard train. First, with an optimum antenna configuration, all the propagation characteristics of a complex subway environment, including near shadowing, path loss,shadow fading, fast fading, level crossing rate (LCR), and average fade duration (AFD), have been measured and computed. Thereafter, comparisons of propagation characteristics in a double-track tunnel (9.8-m width) and a single-track tunnel (4.8-m width) have been made. Finally, all the measurement results have been shown in a complete table for accurate statistical modeling.

Increasing the accuracy of positive displacement meters for the measurement of volume in liquid hydrocarbon logistics

Accuracy in the liquid hydrocarbons custody transfer is mandatory because it has a great economic impact. By far the most accurate meter is the positive displacement (PD) meter. Increasing such an accuracy may adversely affect the cost of the custody transfer, unless simple models are developed in order to lower the cost, which is the purpose of this work. PD meter consists of a fixed volume rotating chamber. For each turn a pulse is counted, hence, the measured volume is the number of pulses times the volume of the chamber. It does not coincide with the real volume, so corrections have to be made. All the corrections are grouped by a meter factor. Among corrections highlights the slippage flow. By solving the Navier-Stokes equations one can find an analytical expression for this flow. It is neither easy nor cheap to apply straightforward the slippage correction; therefore we have made a simple model where slippage is regarded as a single parameter with dimension of time. The model has been tested for several PD meters. In our careful experiments, the meter factor grows with temperature at a constant pace of 8?10?5?ºC?1. Be warned

MBIS: Multivariate Bayesian Image Segmentation Tool

We present MBIS (Multivariate Bayesian Image Segmentation tool), a clustering tool based on the mixture of multivariate normal distributions model. MBIS supports multi-channel bias field correction based on a B-spline model. A second methodological novelty is the inclusion of graph-cuts optimization for the stationary anisotropic hidden Markov random field model. Along with MBIS, we release an evaluation framework that contains three different experiments on multi-site data. We first validate the accuracy of segmentation and the estimated bias field for each channel. MBIS outperforms a widely used segmentation tool in a cross-comparison evaluation. The second experiment demonstrates the robustness of results on atlas-free segmentation of two image sets from scan-rescan protocols on 21 healthy subjects. Multivariate segmentation is more replicable than the monospectral counterpart on T1-weighted images. Finally, we provide a third experiment to illustrate how MBIS can be used in a large-scale study of tissue volume change with increasing age in 584 healthy subjects. This last result is meaningful as multivariate segmentation performs robustly without the need for prior knowledge.

Performance measurement integrated information framework in e-Manufacturing

The implementation of Internet technologies has led to e-Manufacturing technologies becoming more widely used and to the development of tools for compiling, transforming and synchronising manufacturing data through the Web. In this context, a potential area for development is the extension of virtual manufacturing to performance measurement (PM) processes, a critical area for decision making and implementing improvement actions in manufacturing. This paper proposes a PM information framework to integrate decision support systems in e-Manufacturing. Specifically, the proposed framework offers a homogeneous PM information exchange model that can be applied through decision support in e-Manufacturing environment. Its application improves the necessary interoperability in decision-making data processing tasks. It comprises three sub-systems: a data model, a PM information platform and PM-Web services architecture. A practical example of data exchange for measurement processes in the area of equipment maintenance is shown to demonstrate the utility of the model.

Joint statistical analysis of multiple measurement setups for the estimation of vibrational modes

Computing the modal parameters of large structures in Operational Modal Analysis often requires to process data from multiple non simultaneously recorded setups of sensors. These setups share some sensors in common, the so-called reference sensors that are fixed for all the measurements, while the other sensors are moved from one setup to the next. One possibility is to process the setups separately what result in different modal parameter estimates for each setup. Then the reference sensors are used to merge or glue the different parts of the mode shapes to obtain global modes, while the natural frequencies and damping ratios are usually averaged. In this paper we present a state space model that can be used to process all setups at once so the global mode shapes are obtained automatically and subsequently only a value for the natural frequency and damping ratio of each mode is computed. We also present how this model can be estimated using maximum likelihood and the Expectation Maximization algorithm. We apply this technique to real data measured at a footbridge.

Using the EM algorithm to estimate the state space model for OMAX

This paper presents a time-domain stochastic system identification method based on Maximum Likelihood Estimation and the Expectation Maximization algorithm that is applied to the estimation of modal parameters from system input and output data. The effectiveness of this structural identification method is evaluated through numerical simulation. Modal parameters (eigenfrequencies, damping ratios and mode shapes) of the simulated structure are estimated applying the proposed identification method to a set of 100 simulated cases. The numerical results show that the proposed method estimates the modal parameters with precision in the presence of 20% measurement noise even. Finally, advantages and disadvantages of the method have been discussed.

Moiré-Fourier deflectometry for local heat transfer measurement over a backward-facing step

This paper explores the possibility of using the Moire-Fourier deflectometry for measuring the local heat transfer coefficient inside small confined flows (micro-channels) and their relevance for checking theoretical models. This optical technique, supplemented with a digital image processing method of fringes, is applied for studying the local heat transfer over a backward facing step. The experimental results are compared with numerical results obtained from a commercial code, which has been contrasted with relevant solutions from the literature and bulk fluid temperature measurements at the inlet and outlet sections. In order to show the possibilities of the experimental technique, the influence of assuming an adiabatic wall on the numerical heat-transfer model is examined and the degree of agreement is discussed. As a result, the paper shows that the proposed Moiré-Fourier technique is a simple experimental setup suitable for temperature measurements with an accuracy similar to the thermocouples but with a spatial resolution near 0.01 mm.Moiré-Fourier deflectometry for local heat transfer measurement over a backward-facing step

A dynamic factor model for mid-term forecasting of wind power generation

The main objective of this paper is the development and application of multivariate time series models for forecasting aggregated wind power production in a country or region. Nowadays, in Spain, Denmark or Germany there is an increasing penetration of this kind of renewable energy, somehow to reduce energy dependence on the exterior, but always linked with the increaseand uncertainty affecting the prices of fossil fuels. The disposal of accurate predictions of wind power generation is a crucial task both for the System Operator as well as for all the agents of the Market. However, the vast majority of works rarely onsider forecasting horizons longer than 48 hours, although they are of interest for the system planning and operation. In this paper we use Dynamic Factor Analysis, adapting and modifying it conveniently, to reach our aim: the computation of accurate forecasts for the aggregated wind power production in a country for a forecasting horizon as long as possible, particularly up to 60 days (2 months). We illustrate this methodology and the results obtained for real data in the leading country in wind power production: Denmark