Evaluación para el aprendizaje en la asignatura sistemas operativos en modalidad online: un estudio cualitativo basado en la taxonomía de Bloom

La asignatura Sistemas Operativos presenta dificultades para su aprendizaje, pero poco se conoce acerca de las mismas, ya que no han sido determinadas ni estudiadas por la literatura. Asimismo, los trabajos existentes sobre la enseñanza y aprendizaje de Sistemas Operativos se limitan a proponer distintos enfoques para impartir la asignatura y en general no evalúan el aprendizaje de los estudiantes para comprobar la eficacia del método propuesto ni usan metodologías de investigación rigurosas. Por otra parte, la impartición de la asignatura Sistemas Operativos en modalidad online ha sido escasamente estudiada y podría tener dificultades adicionales a las de la modalidad presencial, ya que el contexto online impone una serie de restricciones tanto para el profesor como para el estudiante. En la presente tesis se ha llevado a cabo una evaluación formativa en la asignatura Sistemas Operativos, perteneciente al Grado de Ingeniería Informática de una universidad online. El objetivo inicial de la evaluación era descubrir las dificultades de los estudiantes para la comprensión de los conceptos de la asignatura. Posteriormente y, dada la buena aceptación de la evaluación por parte de los estudiantes, se ampliaron los objetivos del trabajo para explorar los efectos de la evaluación realizada sobre el aprendizaje. La evaluación formativa diseñada está basada en la taxonomía revisada de Bloom y sus principales objetivos son: (a) promover el aprendizaje significativo y (b) hacer a los estudiantes conscientes de su proceso de aprendizaje. La metodología de investigación utilizada es el estudio de caso cualitativo y la muestra está constituida por 9 estudiantes del total de 13 matriculados en la asignatura. Los datos cualitativos analizados proceden de las pruebas de evaluación formativa llevadas a cabo por los estudiantes durante la impartición de la asignatura. Los conceptos de sistemas operativos que han resultado más difíciles de comprender en el curso online estudiado han sido las interrupciones y los semáforos. Además, alrededor de estos conceptos se han identificado las dificultades específicas y sus posibles causas. Las dificultades descubiertas acerca de los semáforos corroboran las investigaciones existentes en el área de programación concurrente. El resto de las dificultades identificadas no habían sido determinadas por la literatura existente. En cuanto a los efectos de la evaluación formativa sobre el aprendizaje, la evidencia empírica muestra que ésta ha provocado en los estudiantes una reflexión profunda sobre los conceptos de la asignatura y sobre su propio proceso de aprendizaje. El estudio de caso presentado puede ayudar a los profesores del área de ingeniería a crear evaluaciones formativas en cursos online. La tesis, por tanto, realiza aportaciones relevantes en las áreas de enseñanza y aprendizaje de sistemas operativos, evaluación formativa, metodologías cualitativas y educación online. ABSTRACT Operating Systems is a difficult subject to learn; however little is known about said difficulties, as they have not been studied nor determined by the relevant literature. Existing studies on teaching and learning the subject of operating systems are limited to presenting different approaches for teaching the subject and generally do not evaluate students’ learning to verify the effectiveness of the proposed methods, nor do they use rigorous research methodologies. On the other hand, there are very few studies on teaching operating systems online, which may inherently present more difficulties than the in-person format, since an online context imposes a series of restrictions on both professors and students, such as not having face-to-face interaction for communications. This thesis studies a formative assessment of the subject of operating systems, as part of the Degree in Information Technology Engineering for an online university. The initial objective of this assessment was to determine the students’ difficulties in conceptual comprehension for this subject. Once students had accepted the assessment, the study’s objectives were expanded to include an investigation of the effects of the assessment on learning. The designed formative assessment was based on Revised Bloom’s Taxonomy with the following main objectives: (a) to promote meaningful learning and (b) (b) to make students aware of their learning process. The research methodology involves a qualitative case study with a sample consisting of 9 of the total 13 students registered for this course. The qualitative data analyzed comes from the formative assessment tests taken by these students during the course. The most difficult operating systems concepts for students in the online course were interrupts and semaphores. Additionally, the specific difficulties and their possible causes have been identified. The students’ comprehension difficulties with semaphores corroborate the existing research in the area of concurrent programming. The other identified difficulties were not discussed in the existing literature. Regarding the effects of the formative assessment on learning, the empirical evidence shows that it causes students to reflect carefully on the subject’s concepts as well as their own learning process. The presented case study can help professors in the area of engineering to create formative assessments for online courses. This thesis, therefore, makes relevant contributions to the areas of teaching and learning operating systems, formative assessment, qualitative methodologies, and online education.

Understanding how to reduce road transport emissions : modelling the impact of eco-driving

Entre los problemas medioambientales más trascendentales para la sociedad, se encuentra el del cambio climático así como el de la calidad del aire en nuestras áreas metropolitanas. El transporte por carretera es uno de los principales causantes, y como tal, las administraciones públicas se enfrentan a estos problemas desde varios ángulos: Cambios a modos de transporte más limpios, nuevas tecnologías y combustibles en los vehículos, gestión de la demanda y el uso de tecnologías de la información y la comunicación (ICT) aplicadas al transporte. En esta tesis doctoral se plantea como primer objetivo el profundizar en la comprensión de cómo ciertas medidas ICT afectan al tráfico, las emisiones y la propia dinámica de los vehículos. El estudio se basa en una campaña de recogida de datos con vehículos flotantes para evaluar los impactos de cuatro medidas concretas: Control de velocidad por tramo, límites variables de velocidad, limitador de velocidad (control de crucero) y conducción eficiente (eco‐driving). Como segundo objetivo, el estudio se centra en la conducción eficiente, ya que es una de las medidas que más ahorros de combustible presenta a nivel individual. Aunque estas reducciones están suficientemente documentadas en la literatura, muy pocos estudios se centran en estudiar el efecto que los conductores eficientes pueden tener en el flujo de tráfico, y cuál sería el impacto si se fuera aumentando el porcentaje de este tipo de conductores. A través de una herramienta de microsimulación de tráfico, se han construido cuatro modelos de vías urbanas que se corresponden con una autopista urbana, una arteria, un colector y una vía local. Gracias a los datos recogidos en la campaña de vehículos flotantes, se ha calibrado el modelo, tanto el escenario base como el ajuste de parámetros de conducción para simular la conducción eficiente. En total se han simulado 72 escenarios, variando el tipo de vía, la demanda de tráfico y el porcentaje de conductores eficientes. A continuación se han calculado las emisiones de CO2 and NOx mediante un modelo de emisiones a nivel microscópico. Los resultados muestran que en escenarios con alto porcentaje de conductores eficientes y altas demandas de tráfico las emisiones aumentan. Esto se debe a que las mayores distancias de seguridad y las aceleraciones y frenadas suaves hacen que aumente la congestión, produciendo así mayores emisiones a nivel global. Climate change and the reduced air quality in our metropolitan areas are two of the main environmental problems that the society is addressing currently. Being road transportation one of the main contributors, public administrations are facing these problems from different points of view: shift to cleaner modes, new fuels and vehicle technologies, demand management and the use of information and communication technologies (ICT) applied to transportation. The first objective of this thesis is to understand how certain ICT measures affect traffic, emissions and vehicle dynamics. The study is based on a data collection campaign with floating vehicles to evaluate the impact of four specific measures: section speed control, variable speed limits, cruise control and eco‐driving. The second objective of the study focuses on eco‐driving, as it is one of the measures that present the largest fuel savings at an individual level. Although these savings are well documented in the literature, few studies focus on how ecodrivers affect the surrounding vehicles and the traffic, and what would be the impact in case of different eco‐drivers percentage. Using a traffic micro‐simulation tool, four models in urban context have been built, corresponding to urban motorway, urban arterial, urban collector and a local street. Both the base‐case and the parameters setting to simulate eco‐driving have been calibrated with the data collected through floating vehicles. In total 72 scenarios were simulated, varying the type of road, traffic demand and the percentage of eco‐drivers. Then, the CO2 and NOx emissions have been estimated through the use of an emission model at microscopic level. The results show that in scenarios with high percentage of co‐drivers and high traffic demand the emissions rise. Higher headways and smooth acceleration and decelerations increase congestion, producing higher emissions globally.

Quantitative Determination of the Relationship between Internal Validity and Bias in Software Engineering Experiments: Consequences for Systematic Literature Reviews

Quality assessment is one of the activities performed as part of systematic literature reviews. It is commonly accepted that a good quality experiment is bias free. Bias is considered to be related to internal validity (e.g., how adequately the experiment is planned, executed and analysed). Quality assessment is usually conducted using checklists and quality scales. It has not yet been proven;however, that quality is related to experimental bias. Aim: Identify whether there is a relationship between internal validity and bias in software engineering experiments. Method: We built a quality scale to determine the quality of the studies, which we applied to 28 experiments included in two systematic literature reviews. We proposed an objective indicator of experimental bias, which we applied to the same 28 experiments. Finally, we analysed the correlations between the quality scores and the proposed measure of bias. Results: We failed to find a relationship between the global quality score (resulting from the quality scale) and bias; however, we did identify interesting correlations between bias and some particular aspects of internal validity measured by the instrument. Conclusions: There is an empirically provable relationship between internal validity and bias. It is feasible to apply quality assessment in systematic literature reviews, subject to limits on the internal validity aspects for consideration.

The evolution of the laws of software evolution. A discussion based on a systematic literature review

After more than 40 years of life, software evolution should be considered as a mature field. However, despite such a long history, many research questions still remain open, and controversial studies about the validity of the laws of software evolution are common. During the first part of these 40 years the laws themselves evolved to adapt to changes in both the research and the software industry environments. This process of adaption to new paradigms, standards, and practices stopped about 15 years ago, when the laws were revised for the last time. However, most controversial studies have been raised during this latter period. Based on a systematic and comprehensive literature review, in this paper we describe how and when the laws, and the software evolution field, evolved. We also address the current state of affairs about the validity of the laws, how they are perceived by the research community, and the developments and challenges that are likely to occur in the coming years.

The Innovation Sources in Software Engineering: A Systematic Literature Review

During the last century many researches on the business, marketing and technology fields have developed the innovation research line and large amount of knowledge can be found in the literature. Currently, the importance of systematic and openness approaches to manage the available innovation sources is well established in many knowledge fields. Also in the software engineering sector, where the organizations need to absorb and to exploit as much innovative ideas as possible to get success in the current competitive environment. This Master Thesis presents an study related with the innovation sources in the software engineering eld. The main research goals of this work are the identication and the relevance assessment of the available innovation sources and the understanding of the trends on the innovation sources usage. Firstly, a general review of the literature have been conducted in order to define the research area and to identify research gaps. Secondly, the Systematic Literature Review (SLR) has been proposed as the research method in this work to report reliable conclusions collecting systematically quality evidences about the innovation sources in software engineering field. This contribution provides resources, built-on empirical studies included in the SLR, to support a systematic identication and an adequate exploitation of the innovation sources most suitable in the software engineering field. Several artefacts such as lists, taxonomies and relevance assessments of the innovation sources most suitable for software engineering have been built, and their usage trends in the last decades and their particularities on some countries and knowledge fields, especially on the software engineering, have been researched. This work can facilitate to researchers, managers and practitioners of innovative software organizations the systematization of critical activities on innovation processes like the identication and exploitation of the most suitable opportunities. Innovation researchers can use the results of this work to conduct research studies involving the innovation sources research area. Whereas, organization managers and software practitioners can use the provided outcomes in a systematic way to improve their innovation capability, increasing consequently the value creation in the processes that they run to provide products and services useful to their environment. In summary, this Master Thesis research the innovation sources in the software engineering field, providing useful resources to support an effective innovation sources management. Moreover, several aspects should be deeply study to increase the accuracy of the presented results and to obtain more resources built-on empirical knowledge. It can be supported by the INno- vation SOurces MAnagement (InSoMa) framework, which is introduced in this work in order to encourage openness and systematic approaches to identify and to exploit the innovation sources in the software engineering field.

Software industry experiments: a systematic literature review

There is no specialized survey of experiments conducted in the software industry. Goal: Identify the major features of software industry experiments, such as time distribution, independent and dependent variables, subject types, design types and challenges. Method: Systematic literature review, taking the form of a scoping study. Results: We have identified 10 experiments and five quasi-experiments up to July 2012. Most were run as of 2003. The main features of these studies are that they test technologies related to quality and management and analyse outcomes related to effectiveness and effort. Most experiments have a factorial design. The major challenges faced by experimenters are to minimize the cost of running the experiment for the company and to schedule the experiment so as not to interfere with production processes.

Coordination mechanisms and software in industrial networks - a literature review

This paper groups recent supply chain management research focused on organizational design and its software support. The classification encompasses criteria related to research methodology and content. Empirical studies from management science focus on network types and organizational fit. Novel planning algorithms and innovative coordination schemes are developed mostly in the field of operations research in order to propose new software features. Operations and production management realize cost-benefit analysis of IT software implementations. The success of software solutions for network coordination depends strongly on the fit of three dimensions: network configuration, coordination scheme and software functionality. This paper concludes with proposals for future research on unaddressed issues within and among the identified research streams.