Seismic modelling and ava analysis of hidrocarbon traps

In this study, forward seismic modelling of four geological models with Hydrocarbon (HC) traps were performed by ray tracing method to produce synthetic seismogram of each model. The idea is to identify the Hydrocarbon Indicators (HCI‟s) such as bright spot, flat spot, dim spot and Bottom Simulating Reflector (BSR) in the synthethic seismogram. The modelling was performed in DISCO/FOCUS 5.0 seismic data processing programme. Strong positive and negative reflection amplitudes and some artifact reflection horizons were observed on produced seismograms due to rapid changes in subsurface velocity and geometry respectively Additionally, Amplitude-versus-angle (AVA) curves of each HCIs was calculated by the Crewes Zoeppritz Explorer programme. AVA curves show that how the reflection coefficients change with the density and the P and S wave velocities of each layer such as oil, gas, gas hydrate or water saturated sediments. Due to AVA curves, an increase in reflection amplitude with incident angle of seismic waves corresponds to an indicator of a hydrocarbon reservoir

Modelling and Simulation of Moored Devices for Ocean Currents Energy Harnessing

The main objective of this paper is the presentation of modelling solutions off loating devices that can be used for harnessing energy from ocean currents. It has been structured into three main parts. First, the growing current interest in marine renewable energy in general, and in extracting energy from currents in particular, is presented, showing the large number of solutions that are emerging and some of the most significant types. GESMEY generator is presented in second section. It is based on a new concept that has been patented by the Universidad Politécnica de Madrid and which is currently being developed through a collaborative agreement with the SOERMAR Foundation. The main feature of this generator is that on operation is fully submerged, and no other facilities are required to move to floating state for maintenance, which greatly increases its performance. Third part of the article is devoted to present the modelling and simulation challenges that arise in the development of devices for harnessing the energy of marine currents, along with some solutions which have been adopted within the frame of the GESMEY Project, making particular emphasis on the dynamics of the generator and its control

Intermediate band materials for more efficient solar energy use: quantum modelling and experimental realizations

The intermediate band (IB) solar cell (Fig. 1) has been proposed [1] to increase photovoltaic efficiency by a factor above 1.5, based on the absorption of two sub-bandgap photons to promote an electron across the bandgap. To realize this principle, that can be applied also to obtain efficient photocatalysis with sunlight, we proposed in recent years several materials where a metal or heavy element, substituting for an electropositive atom in a known semiconductor that has an appropriate band gap width (around 2 eV), forms inside the gap the partially filled levels needed for this aim

Land use modelling and the role of stakeholders in natural protected areas: the case of Doñana national park, Spain

Doñana, a National Park since 1969, a UNESCO site since 1994 among other protected area designations of national and international character, is a coastal dune and marshland ecosystem of outstanding importance for biodiversity and conservation at the mouth of the Guadalaquivir River, Southwest Spain. However, the Doñana natural area is seriously threatened by global change factors such as humanly induced climate change, habitat loss, overexploitation of ecosystem services, and pollution. Not all stakeholders are convinced of the benefits of the national park, and management of Doñana, its environs and watershed are the subject of intense disagreement. This interplay between natural characteristics of great value with intense human pressure makes Doñana a fascinating workshop for the study of global human environment interactions. Here, we discuss the role of stakeholders in the application of a cellular automatabased model to Doñana and its environs and present the results of a series of exercises undertaken with stakeholders to parametrize the model, something often done by researchers without stakeholder engagement. By engaging with stakeholders early in the project, feedback generated from workshops contributes to model development. Stakeholders are therefore contributors of empirical data for the model as well as independent evaluators providing local and specialist knowledge.

Integration of research advances in modelling and monitoring in support of WFD river basin management planning in the context of climate change

The integration of scientific knowledge about possible climate change impacts on water resources has a direct implication on the way water policies are being implemented and evolving. This is particularly true regarding various technical steps embedded into the EU Water Framework Directive river basin management planning, such as risk characterisation, monitoring, design and implementation of action programmes and evaluation of the "good status" objective achievements (in 2015). The need to incorporate climate change considerations into the implementation of EU water policy is currently discussed with a wide range of experts and stakeholders at EU level. Research trends are also on-going, striving to support policy developments and examining how scientific findings and recommendations could be best taken on board by policy-makers and water managers within the forthcoming years. This paper provides a snapshot of policy discussions about climate change in the context of the WFD river basin management planning and specific advancements of related EU-funded research projects. Perspectives for strengthening links among the scientific and policy-making communities in this area are also highlighted.

Contribution to energy consumption modelling and forecast in next generation access networks

La contribución del sector de las tecnologías de la información y las comunicaciones (TICs) al consumo de energía a nivel global se ha visto incrementada considerablemente en la última década al mismo tiempo que su relevancia dentro de la economía global. Se prevé que esta tendencia continúe debido al uso cada vez más intensivo de estas tecnologías. Una de las principales causas es el tráfico de datos de banda ancha generado por el uso de las redes de telecomunicaciones. De hecho como respuesta a esta demanda de recursos por parte de los usuarios, de la industria de las telecomunicaciones está iniciando el despliegue de las redes de nueva generación. En cualquier caso, el consumo de energía es un factor generalmente ausente del debate sobre el despliegue de estas tecnologías, a pesar de la posible repercusión que pueda llegar a tener en los costes y la sostenibilidad de estos proyectos. A lo largo de este trabajo se desarrollan modelos para evaluar el consumo energético de las redes de acceso de nueva generación (NGAN). Estos servirán tanto para llevar a cabo cálculos en un escenario global estático, como en cualquiera otro que determine la potencial evolución de la red de acceso a lo largo de su despliegue. Estos modelos combinan tres factores: la penetración prospectiva de cada una de las tecnologías de banda ancha analizadas, el tráfico generado por usuario y su futura evolución, y el perfil de consumo de energía de cada uno de los dispositivos de red desplegados. Tras evaluar los resultados derivados de la aplicación de los modelos en el caso demográfico específico de España, se obtienen conclusiones acerca de las diferencias tecnológicas en cuanto al consumo energético, sus implicaciones económicas, y la sensibilidad de los cálculos atendiendo a posibles modificaciones en los valores de referencia de diferentes parámetros de diseño. Se destaca por tanto el efecto en el consumo energético de los desarrollos tecnológicos, tecno-económicos, y de las decisiones en el ámbito regulatorio. Aunque como se ha dicho, se ha ejemplificado el cálculo para un caso particular, tanto los modelos como las conclusiones extraídas se pueden extrapolar a otros países similares.

AR modelling and DDS for in situ surveillance of capacitive pressure transmitters

In this work, a methodology is proposed to find the dynamics poles of a capacitive pressure transmitter in order to enhance and extend the on line surveillance of this type of sensors based on the response time measurement by applying noise analysis techniques and the Dynamic Data System. Several measurements have been analyzed taken from a Pressurized Water Reactor. The methodology proposes an autoregressive fit whose order is determined by the sensor dynamics poles. Nevertheless, the signals that have been analyzed, could not be filtered properly in order to remove the plant noise, thus, this was considered as an additional pair of complex conjugate poles. With this methodology we have come up with the numerical value of the sensor second real pole in spite of its low influence on the sensor dynamic response. This opens up a more accurate on line sensor surveillance since the previous methods were achieved by considering one real pole only.

Modelling and forecasting fossil fuels, CO2 and electricity prices and their volatilities

In the current uncertain context that affects both the world economy and the energy sector, with the rapid increase in the prices of oil and gas and the very unstable political situation that affects some of the largest raw materials’ producers, there is a need for developing efficient and powerful quantitative tools that allow to model and forecast fossil fuel prices, CO2 emission allowances prices as well as electricity prices. This will improve decision making for all the agents involved in energy issues. Although there are papers focused on modelling fossil fuel prices, CO2 prices and electricity prices, the literature is scarce on attempts to consider all of them together. This paper focuses on both building a multivariate model for the aforementioned prices and comparing its results with those of univariate ones, in terms of prediction accuracy (univariate and multivariate models are compared for a large span of days, all in the first 4 months in 2011) as well as extracting common features in the volatilities of the prices of all these relevant magnitudes. The common features in volatility are extracted by means of a conditionally heteroskedastic dynamic factor model which allows to solve the curse of dimensionality problem that commonly arises when estimating multivariate GARCH models. Additionally, the common volatility factors obtained are useful for improving the forecasting intervals and have a nice economical interpretation. Besides, the results obtained and methodology proposed can be useful as a starting point for risk management or portfolio optimization under uncertainty in the current context of energy markets.

Modelling and Control of Stepper Motors for High Accuracy Positioning Systems Used in Radioactive Environments

Hybrid Stepper Motors are widely used in open-loop position applications. They are the choice of actuation for the collimators in the Large Hadron Collider, the largest particle accelerator at CERN. In this case the positioning requirements and the highly radioactive operating environment are unique. The latter forces both the use of long cables to connect the motors to the drives which act as transmission lines and also prevents the use of standard position sensors. However, reliable and precise operation of the collimators is critical for the machine, requiring the prevention of step loss in the motors and maintenance to be foreseen in case of mechanical degradation. In order to make the above possible, an approach is proposed for the application of an Extended Kalman Filter to a sensorless stepper motor drive, when the motor is separated from its drive by long cables. When the long cables and high frequency pulse width modulated control voltage signals are used together, the electrical signals difer greatly between the motor and drive-side of the cable. Since in the considered case only drive-side data is available, it is therefore necessary to estimate the motor-side signals. Modelling the entire cable and motor system in an Extended Kalman Filter is too computationally intensive for standard embedded real-time platforms. It is, in consequence, proposed to divide the problem into an Extended Kalman Filter, based only on the motor model, and separated motor-side signal estimators, the combination of which is less demanding computationally. The efectiveness of this approach is shown in simulation. Then its validity is experimentally demonstrated via implementation in a DSP based drive. A testbench to test its performance when driving an axis of a Large Hadron Collider collimator is presented along with the results achieved. It is shown that the proposed method is capable of achieving position and load torque estimates which allow step loss to be detected and mechanical degradation to be evaluated without the need for physical sensors. These estimation algorithms often require a precise model of the motor, but the standard electrical model used for hybrid stepper motors is limited when currents, which are high enough to produce saturation of the magnetic circuit, are present. New model extensions are proposed in order to have a more precise model of the motor independently of the current level, whilst maintaining a low computational cost. It is shown that a significant improvement in the model It is achieved with these extensions, and their computational performance is compared to study the cost of model improvement versus computation cost. The applicability of the proposed model extensions is demonstrated via their use in an Extended Kalman Filter running in real-time for closed-loop current control and mechanical state estimation. An additional problem arises from the use of stepper motors. The mechanics of the collimators can wear due to the abrupt motion and torque profiles that are applied by them when used in the standard way, i.e. stepping in open-loop. Closed-loop position control, more specifically Field Oriented Control, would allow smoother profiles, more respectful to the mechanics, to be applied but requires position feedback. As mentioned already, the use of sensors in radioactive environments is very limited for reliability reasons. Sensorless control is a known option but when the speed is very low or zero, as is the case most of the time for the motors used in the LHC collimator, the loss of observability prevents its use. In order to allow the use of position sensors without reducing the long term reliability of the whole system, the possibility to switch from closed to open loop is proposed and validated, allowing the use of closed-loop control when the position sensors function correctly and open-loop when there is a sensor failure. A different approach to deal with the switched drive working with long cables is also presented. Switched mode stepper motor drives tend to have poor performance or even fail completely when the motor is fed through a long cable due to the high oscillations in the drive-side current. The design of a stepper motor output fillter which solves this problem is thus proposed. A two stage filter, one devoted to dealing with the diferential mode and the other with the common mode, is designed and validated experimentally. With this ?lter the drive performance is greatly improved, achieving a positioning repeatability even better than with the drive working without a long cable, the radiated emissions are reduced and the overvoltages at the motor terminals are eliminated.

Estudio de las dinámicas de pérdida de peso corporal en los programas de ejercicio físico y nutrición = Study of the dynamics of body weight loss in exercise and nutritional programs

Introducción. La obesidad puede definirse como una enfermedad metabólica crónica de origen multifactorial, lo que provoca trastornos o problemas físicos y psicológicos a la persona, con patologías asociadas que limitan la esperanza de vida y deterioran la calidad de la misma, siendo determinante para sus áreas sociales y laborales. Este trastorno metabólico crónico se caracteriza por una acumulación excesiva de energía en el cuerpo en forma de grasa, lo que lleva a un aumento de peso con respecto al valor esperado por sexo, edad y altura. La gestión y el tratamiento de la obesidad tienen objetivos más amplios que la pérdida de peso e incluyen la reducción del riesgo y la mejora de la salud. Estos pueden ser alcanzados por la pérdida modesta de peso (es decir, 10.5% del peso corporal inicial), la mejora del contenido nutricional de la dieta y un modesto incremento en la actividad física y condición física. La dieta es uno de los métodos más populares para perder peso corporal. El ejercicio es otra alternativa para perder peso corporal. El aumento de ejercicio provoca un desequilibrio cuando se mantiene la ingesta calórica. También tiene ventajas, como la mejora del tono muscular, la capacidad cardiovascular, fuerza y flexibilidad, aumenta el metabolismo basal y mejora el sistema inmunológico. Objetivos. El objetivo de esta tesis es contribuir en un estudio de intervención para aclarar la evolución del peso corporal durante una intervención de dieta y ejercicio. Para ello, se evaluaron los efectos de la edad, sexo, índice de masa corporal inicial y el tipo de tratamiento en las tendencias de pérdida de peso. Otro objetivo de la tesis era crear un modelo de regresión lineal múltiple capaz de predecir la pérdida de peso corporal después del periodo de intervención. Y, por último, determinar el efecto sobre la composición corporal (peso corporal, índice de masa corporal, la masa grasa, y la masa libre de grasa) de las diferentes intervenciones basadas en ejercicios (fuerza, resistencia, resistencia combinada con fuerza, y las recomendaciones de actividad física (grupo control)) en combinación con dieta de adultos con sobrepeso y obesidad, después de la intervención, así como los cambios de la composición corporal 3 años más tarde. Diseño de la investigación. Los datos empleados en el análisis de esta tesis son parte del proyecto “Programas de Nutrición y Actividad Física para el tratamiento de la obesidad” (PRONAF). El proyecto PRONAF es un estudio clínico sobre programas de nutrición y actividad física para el sobrepeso y la obesidad, desarrollado en España durante varios años de intervención. Fue diseñado, en parte, para comparar diferentes tipos de intervención, con el objetivo de evaluar su impacto en las dinámicas de pérdida de peso, en personas con sobrepeso y obesidad. Como diseño experimental, el estudio se basó en una restricción calórica, a la que, en algunos casos, se le añadió un protocolo de entrenamiento (fuerza, resistencia, o combinado, en igualdad de volumen e intensidad). Las principales variables para la investigación que comprende esta tesis fueron: el peso corporal y la composición corporal (masa grasa y masa libre de grasa). Conclusiones. En esta tesis, para los programas de pérdida de peso en personas con sobrepeso y obesidad con un 25-30% de la restricción calórica, el peso corporal se redujo significativamente en ambos sexos, sin tener en cuenta la edad y el tipo de tratamiento seguido. Según los resultados del estudio, la pérdida de peso realizada por un individuo (hombre o mujer) durante los seis meses puede ser representada por cualquiera de las cinco funciones (lineal, potencial, exponencial, logarítmica y cuadrática) en ambos sexos, siendo la cuadrática la que tiende a representarlo mejor. Además, se puede concluir que la pérdida de peso corporal se ve afectada por el índice de masa corporal inicial y el sexo, siendo mayor para las personas obesas que para las de sobrepeso, que muestran diferencias entre sexos sólo en la condición de sobrepeso. Además, es posible calcular el peso corporal final de cualquier participante involucrado en una intervención utilizando la metodología del proyecto PRONAF sólo conociendo sus variables iniciales de composición corporal. Además, los cuatro tipos de tratamientos tuvieron resultados similares en cambios en la composición corporal al final del período de intervención, con la única excepción de la masa libre de grasa, siendo los grupos de entrenamiento los que la mantuvieron durante la restricción calórica. Por otro lado, sólo el grupo combinado logra mantener la reducción de la masa grasa (%) 3 años después del final de la intervención. ABSTRACT Introduction. Obesity can be defined as a chronic metabolic disease from a multifactorial origin, which leads to physical and psychological impacts to the person, with associated pathologies that limit the life expectancy and deteriorate the quality of it, being determinant for the social and labor areas of the person. This chronic metabolic disorder is characterized by an excessive accumulation of energy in the body as fat, leading to increased weight relative to the value expected by sex, age and height. The management and treatment of obesity have wider objectives than weight loss alone and include risk reduction and health improvement. These may be achieved by modest weight loss (i.e. 5–10% of initial body weight), improved nutritional content of the diet and modest increases in physical activity and fitness. Weight loss through diet is one of the most popular approaches to lose body weight. Exercise is another alternative to lose body weight. The increase of exercise causes an imbalance when the caloric intake is maintained. It also has advantages such as improved muscle tone, cardiovascular fitness, strength and flexibility, increases the basal metabolism and improves immune system. Objectives. The aim of this thesis is to contribute with an interventional study to clarify the evolution of the body weight during a diet and exercise intervention. For this, the effects of age, sex, initial body mass index and type of treatment on weight loss tendencies were evaluated. Another objective of the thesis was to create a multiple linear regression model able to predict the body weight loss after the intervention period. And, finally, to determine the effect upon body composition (body weight, body mass index, fat mass, and fat-free mass of different exercise-based interventions (strength, endurance, combined endurance and strength, and physical activity recommendations group (control group)) combined with diet in overweight and obese adults, after intervention as well as body composition changes 3 years later. Research Design. The data used in the analysis of this thesis are part of the project "Programs of Nutrition and Physical Activity for the treatment of obesity" (PRONAF). The PRONAF project is a clinical trial program about nutrition and physical activity for overweight and obesity, developed in Spain for several years of intervention. It was designed, in part, to compare different types of intervention, in order to assess their impact on the dynamics of weight loss in overweight and obese people. As experimental design, the study was based on caloric restriction, which, in some cases, added a training protocol (strength, endurance, or combined in equal volume and intensity). The main research variables comprising this thesis were: body weight and body composition outcomes (fat mass and fat-free mass). Conclusions. In this thesis, for weight loss programs in overweight and obese people with 25-30% of caloric restriction, the body weight was significantly decreased in both sexes, regardless the age and type of followed treatment. According to the results of the study, the weight loss performed by an individual (male or female) during six months can be represented by any of the five functions (linear, power law, exponential, logarithmic and quadratic) in both sexes, being the quadratic one which tends to represent it better. In addition, it can be concluded that the body weight loss is affected by the initial body mass index and sex condition, being greater for the obese people than for the overweight one, showing differences between sexes only in the overweight condition. Moreover, it is possible to calculate the final body weight of any participant engaged in an intervention using the PRONAF Project methodology only knowing their initial body composition variables. Furthermore, the four types of treatments had similar results on body composition changes at the end of the intervention period, with the only exception of fat-free mass, being the training groups the ones that maintained it during the caloric restriction. On the other hand, only the combined group achieved to maintain the fat mass (%) reduced 3 years after the end of the intervention.

Code assessment and modelling for Design Basis Accident Analysis of the European sodium fast reactor design. Part I: System description, modelling and benchmarking

The new reactor concepts proposed in the Generation IV International Forum (GIF) are conceived to improve the use of natural resources, reduce the amount of high-level radioactive waste and excel in their reliability and safe operation. Among these novel designs sodium fast reactors (SFRs) stand out due to their technological feasibility as demonstrated in several countries during the last decades. As part of the contribution of EURATOM to GIF the CP-ESFR is a collaborative project with the objective, among others, to perform extensive analysis on safety issues involving renewed SFR demonstrator designs. The verification of computational tools able to simulate the plant behaviour under postulated accidental conditions by code-to-code comparison was identified as a key point to ensure reactor safety. In this line, several organizations employed coupled neutronic and thermal-hydraulic system codes able to simulate complex and specific phenomena involving multi-physics studies adapted to this particular fast reactor technology. In the “Introduction” of this paper the framework of this study is discussed, the second section describes the envisaged plant design and the commonly agreed upon modelling guidelines. The third section presents a comparative analysis of the calculations performed by each organisation applying their models and codes to a common agreed transient with the objective to harmonize the models as well as validating the implementation of all relevant physical phenomena in the different system codes.

Laser Shock Microforming of Thin Metal Sheets: Physical Principles, Modelling and Experimental Implementation

The increasing demands in MEMS fabrication are leading to new requirements in production technology. Especially the packaging and assembly require high accuracy in positioning and high reproducibility in combination with low production costs. Conventional assembly technology and mechanical adjustment methods are time consuming and expensive. Each component of the system has to be positioned and fixed. Also adjustment of the parts after joining requires additional mechanical devices that need to be accessible after joining. Accurate positioning of smallest components represents an up-to-date key assignment in micro-manufacturing. It has proven to be more time and cost efficient to initially assemble the components with widened tolerances before precisely micro-adjusting them in a second step.

Infrastructure (Resilience-oriented) Modelling Language: I®ML A proposal for modelling infrastructures and their connections

The modelling of critical infrastructures (CIs) is an important issue that needs to be properly addressed, for several reasons. It is a basic support for making decisions about operation and risk reduction. It might help in understanding high-level states at the system-of-systems layer, which are not ready evident to the organisations that manage the lower level technical systems. Moreover, it is also indispensable for setting a common reference between operator and authorities, for agreeing on the incident scenarios that might affect those infrastructures. So far, critical infrastructures have been modelled ad-hoc, on the basis of knowledge and practice derived from less complex systems. As there is no theoretical framework, most of these efforts proceed without clear guides and goals and using informally defined schemas based mostly on boxes and arrows. Different CIs (electricity grid, telecommunications networks, emergency support, etc) have been modelled using particular schemas that were not directly translatable from one CI to another. If there is a desire to build a science of CIs it is because there are some observable commonalities that different CIs share. Up until now, however, those commonalities were not adequately compiled or categorized, so building models of CIs that are rooted on such commonalities was not possible. This report explores the issue of which elements underlie every CI and how those elements can be used to develop a modelling language that will enable CI modelling and, subsequently, analysis of CI interactions, with a special focus on resilience

Desing and Validation of a Light Inference System to Support Embedded Context Reasoning

Embedded context management in resource-constrained devices (e.g. mobile phones, autonomous sensors or smart objects) imposes special requirements in terms of lightness for data modelling and reasoning. In this paper, we explore the state-of-the-art on data representation and reasoning tools for embedded mobile reasoning and propose a light inference system (LIS) aiming at simplifying embedded inference processes offering a set of functionalities to avoid redundancy in context management operations. The system is part of a service-oriented mobile software framework, conceived to facilitate the creation of context-aware applications—it decouples sensor data acquisition and context processing from the application logic. LIS, composed of several modules, encapsulates existing lightweight tools for ontology data management and rule-based reasoning, and it is ready to run on Java-enabled handheld devices. Data management and reasoning processes are designed to handle a general ontology that enables communication among framework components. Both the applications running on top of the framework and the framework components themselves can configure the rule and query sets in order to retrieve the information they need from LIS. In order to test LIS features in a real application scenario, an ‘Activity Monitor’ has been designed and implemented: a personal health-persuasive application that provides feedback on the user’s lifestyle, combining data from physical and virtual sensors. In this case of use, LIS is used to timely evaluate the user’s activity level, to decide on the convenience of triggering notifications and to determine the best interface or channel to deliver these context-aware alerts.d

Proposal for the Management of temporal and semantic components of Geographic Information

This poster raises the issue of a research work oriented to the storage, retrieval, representation and analysis of dynamic GI, taking into account The ultimate objective is the modelling and representation of the dynamic nature of geographic features, establishing mechanisms to store geometries enriched with a temporal structure (regardless of space) and a set of semantic descriptors detailing and clarifying the nature of the represented features and their temporality. the semantic, the temporal and the spatiotemporal components. We intend to define a set of methods, rules and restrictions for the adequate integration of these components into the primary elements of the GI: theme, location, time [1]. We intend to establish and incorporate three new structures (layers) into the core of data storage by using mark-up languages: a semantictemporal structure, a geosemantic structure, and an incremental spatiotemporal structure. Thus, data would be provided with the capability of pinpointing and expressing their own basic and temporal characteristics, enabling them to interact each other according to their context, and their time and meaning relationships that could be eventually established