Heart Failure Monitoring System Based on Wearable and Information Technologies

In Europe, Cardiovascular Diseases (CVD) are the leading source of death, causing 45% of all deceases. Besides, Heart Failure, the paradigm of CVD, mainly affects people older than 65. In the current aging society, the European MyHeart Project was created, whose mission is to empower citizens to fight CVD by leading a preventive lifestyle and being able to be diagnosed at an early stage. This paper presents the development of a Heart Failure Management System, based on daily monitoring of Vital Body Signals, with wearable and mobile technologies, for the continuous assessment of this chronic disease. The System makes use of the latest technologies for monitoring heart condition, both with wearable garments (e.g. for measuring ECG and Respiration); and portable devices (such as Weight Scale and Blood Pressure Cuff) both with Bluetooth capabilities

Estudio y desarrollo sobre sistemas de simulación para comunicaciones móviles, LTE

Este proyecto, recoge el estudio de diferentes simuladores sobre comunicaciones móviles, que se encargan de analizar el comportamiento de las tecnologías UMTS (Universal Mobile Telecommunications System), 3G y LTE (Long Term Evolution),3.9G, centrándose principalmente en el caso de los simuladores LTE, ya que es la tecnología que se está implantando en la actualidad. Por ello, antes de analizar las características de la interfaz radio más importante de esta generación, la 3.9G, se hará una overview general de cómo han ido evolucionando las comunicaciones móviles a lo largo de la historia, se analizarán las características de la tecnología móvil actual, la 3.9G, para posteriormente centrarse en un par de simuladores que demostrarán, mediante resultados gráficos, estas características. Hoy en día, el uso de estos simuladores es totalmente necesario, ya que las comunicaciones móviles, avanzan a un ritmo vertiginoso y es necesario por lo tanto conocer las prestaciones que pueden producir las diferentes tecnologías móviles utilizadas. Los simuladores utilizados por este proyecto, permiten analizar el comportamiento de varios escenarios, ya que existen diferentes tipos de simuladores, tanto a nivel de enlace como a nivel de sistema. Se mencionarán una serie de simuladores correspondientes a la tercera generación UMTS, pero los simuladores en cuestión que se estudiarán y analizarán con más profundidad en este proyecto fin de carrera son los simuladores “Link-Level” y “System-Level”, desarrollados por el “Institute of Communications and Radio-Frecuency Engineering” de la Universidad de Viena. Estos simuladores permiten realizar diferentes simulaciones, como analizar el comportamiento entre una estación base y un único usuario, para el caso de los simuladores a nivel de enlace, o bien analizar el comportamiento de toda una red en el caso de los simuladores a nivel de sistema. Con los resultados que se pueden obtener de ambos simuladores, se realizarán una serie de preguntas, basadas en la práctica realizada por el profesor de la universidad Politécnica de Madrid, Pedro García del Pino, tanto de tipo teóricas como de tipo prácticas, para comprobar que se han entendido los simuladores analizados. Finalmente se citarán las conclusiones que se obtiene de este proyecto, así como las líneas futuras de acción. PROJECT ABSTRACT This project includes the study of different simulators on mobile communications, which are responsible for analyzing the behavior of UMTS (Universal Mobile Telecommunications System), 3G and LTE (Long Term Evolution), 3.9G, mainly focusing on the case of LTE simulators because it is the technology that is being implemented today. Therefore, before analyzing the characteristics of the most important radio interface of this generation, 3.9G, there will give a general overview how the mobile communications have evolved throughout history, analyzing the characteristics of current mobile technology, the 3.9G, later focus on a pair of simulators that demonstrate through graphical results, these characteristics. Today, the use of these simulators is absolutely necessary, because mobile communications advance at a high rate, and it is necessary to know the features that can produce different mobile technologies that are used. The simulators used for this project, allow to analyze the behavior of several scenarios, as there are different types of simulators, both link and system level. It mentioned a number of simulators for the third generation UMTS, but the simulators in question to be studied and analyzed in this final project are the simulators "Link-Level" and "System-Level", developed by the "Institute of Communications and Radio-Frequency Engineering" at the University of Vienna. These simulators allow realize different simulations, analyze the behavior between a base station and a single user, in the case of the link-level simulators or analyze the performance of a network in the case of system-level simulators. With the results that can be obtained from both simulators, will perform a series of questions, based on the practice developed by Pedro García del Pino, Professor of “Universidad Politécnica de Madrid (UPM)”. These questions will be both of a theoretical and practical type, to check that have been understood the analyzed simulators. Finally, it quotes the conclusions obtained from this project and mention the future lines of action.

Proceso de replanteo de un nodo urbano

El continuo desarrollo que está teniendo el mundo de las telecomunicaciones móviles hace que la red móvil esté sufriendo progresivos cambios para adaptarse a las nuevas tecnologías móviles que ofrecen un mejor servicio. El cambio en la red móvil no solo se produce por el desarrollo de las nuevas generaciones móviles. La red móvil se adapta también a la demanda de usuarios la cual no deja de incrementar a lo largo de los últimos años. Por tanto, los operadores tienen que ampliar su red instalando nodos que tengan las nuevas tecnologías y también las anteriores. Aparte de crear nuevos nodos también tienen que modificar sus nodos antiguos y convertirlos en nodos que soporten mayor número de usuarios. Hoy en día, en España, se están instalando nuevos nodos con 2G, 3G y 4G y además se están realizando ampliaciones de portadora para 3G. Este proyecto se divide en cuatro partes, la primera de ella se centra en explicar el proceso a seguir para la instalación de un nuevo nodo urbano. Este proceso es muy parecido para instalar un nodo con una tecnología u otra, en el caso del proyecto se explicarán los pasos a seguir para la instalación de un nodo con 2G y 3G. Posteriormente se explicará cómo se realizan las medidas para corroborar el correcto funcionamiento de un nodo rural y se compararán a las medidas de zona urbana mediante capturas de un nodo específico. En la penúltima parte del proyecto se estudia la cobertura en interiores y las diversas soluciones que se toman normalmente para mejorar dicha cobertura en edificios, almacenes y centros comerciales. Por último aparecen las conclusiones del proyecto y los trabajos futuros en donde se realiza una visión de posibles estudios relacionados con este proyecto y una visión de cómo puede quedar formada la red en unos años. ABSTRACT. Due to the continuous development of mobile telecommunications the mobile networks have undergone rapid changes to adapt to new mobile technologies that offer a better service. The mobile network change hasn´t only occurred because of the development of new generations of mobile radio-communications. The mobile network adapts itself to user demand, which has been growing over the last few years faster than expected. Therefore, mobile operators have to enlarge its network by installing nodes that share the old and new technologies. Apart from creating new nodes, the operators have to modify the old ones and turn them into nodes that support an increasing number of users. Nowadays, in Spain new nodes with 2G 3G and 4G are being installed, and carrier extensions for 3G are being made as well. This project is divided into four parts. The first chapter focuses on explaining the process that should be followed to install a new urban node. This process is similar to install a node with any of the technologies available. In the case of this project, the steps to follow in setting up a wireless node with 2G and 3G will be detailed. Afterwards, in the second chapter the document continues explaining the measurements that should be carried out to ensure proper performance of a rural node. Then, those measurements will be compared with the ones of an urban node. In the third part of the project it is explained how coverage indoor studies are performed, and the different solutions that are usually proposed to improve coverage in buildings, stores and shopping centers. The last chapter explains the conclusions that have been reached and future works. It is provided a widespread view of possible studies related to this project and how the mobile will improve in the following years.

Providing 30Mbit/s to Spain’s final third. -A techno-economic assessment.

Since the Digital Agenda for Europe released the Europe2020 flagship, Member States are looking for ways of fulfilling their agreed commitments to fast and ultrafast internet deployment. However, Europe is not a homogenous reality. The economic, geographic, social and demographic features of each country make it a highly diverse region to develop best practices over Next Generation Access Networks (NGAN) deployments. There are special concerns about NGAN deployments for “the final third”, as referred to the last 25% of the country’s population who, usually, live in rural areas. This paper assesses, through a techno-economic analysis, the access cost of providing over 30 Mbps broadband for the final third of Spain`s population in municipalities, which are classified into area types, referred to as geotypes. Fixed and mobile technologies are compared in order to determine which is the most cost-effective technology for each geotype. The demographic limit for fixed networks (cable, fibre and copper) is also discussed. The assessment focuses on the supply side and the results show the access network cost only. The research completes a previous published assessment (Techno-economic analysis of next generation access networks roll-out. The case of platform competition, regulation and public policy in Spain) by including the LTE scenario. The LTE scenario is dimensioned to provide 30 Mbps (best effort) broadband, considering a network take-up of 25%. The Rocket techno-economic model is used to assess a ten-year study period deployment. Nevertheless, the deployment must start in 2014 and be completed by 2020, in order to fulfil the Digital Agenda’s goals. The feasibility of the deployment is defined as the ability to recoup the investment at the end of the study period. This ability is highly related to network take-up and, therefore, to service adoption. Network deployment in each geotype is compared with the cost of the deployment in the Urban geotype and broadband expected penetration rates for clarity and simplicity. Debating the cost-effective deployments for each geotype, while addressing the Digital Agenda’s goals regarding fast and ultrafast internet, is the main purpose of this paper. At the end of the last year, the independent Spanish regulation agency released the Spain broadband coverage report at the first half of 2013. This document claimed that 59% and 52% of Spain’s population was already covered by NGAN capable of providing 30 Mbps and 100 Mbps broadband respectively. HFC, with 47% of population coverage, and FTTH, with 14%, were considered as a 100 Mbps capable NGAN. Meanwhile VDSL, with 12% of the population covered, was the only NGAN network considered for the 30 Mbps segment. Despite not being an NGAN, the 99% population coverage of HSPA networks was also noted in the report. Since mobile operators are also required to provide 30 Mbps broadband to 90% of the population in rural areas by the end of 2020, mobile networks will play a significant role on the achievement of the 30 Mbps goal in Spain’s final third. The assessment indicates the cost of the deployment per cumulative households coverage with 4 different NGANs: FTTH, HFC, VDSL and LTE. Research shows that an investment ranging from €2,700 (VDSL) to €5,400 (HFC) million will be needed to cover the first half of the population with any fixed technology assessed. The results state that at least €3,000 million will be required to cover these areas with the least expensive technology (LTE). However, if we consider the throughput that fixed networks could provide and achievement of the Digital Agenda’s objectives, fixed network deployments are recommended for up to 90% of the population. Fibre and cable deployments could cover up to a maximum of 88% of the Spanish population cost efficiently. As there are some concerns about the service adoption, we recommend VDSL and mobile network deployments for the final third of the population. Despite LTE being able to provide the most economical roll-out, VDSL could also provide 50 Mbps from 75% to 90% of the Spanish population cost efficiently. For this population gap, facility based competition between VDSL providers and LTE providers must be encouraged. Regarding 90% to 98.5% of the Spanish population, LTE deployment is the most appropriate. Since costumers in less populated the municipalities are more sensitive to the cost of the service, we consider that a single network deployment could be most appropriate. Finally, it has become clear that it is not possible to deliver 30Mbps to the final 1.5% of the population cost-efficiently and adoption predictions are not optimistic either. As there are other broadband alternatives able to deliver up to 20 Mbps, in the authors’ opinion, it is not necessary to cover the extreme rural areas, where public financing would be required.

Desarrollo de un sistema de gestión de tutorías a través de una aplicación móvil

RESUMEN Con la irrupción y el auge de las tecnologías móviles en estos últimos años, se ha hecho patente que los procesos de gestión tienden a ser controlados a través de estas tecnologías, permitiendo al usuario centralizar todos los servicios que le sea posible en un dispositivo de uso tan común como el teléfono móvil, así como acceder a ellos de forma rápida y cómoda. El sistema de tutorías de la Universidad Politécnica de Madrid no es la excepción. Desde su creación, el Grupo de Innovación Educativa Tutorial Action (GIETA) [1] ha trabajado en la modernización del proceso de gestión que conlleva el sistema de tutorías, buscando las deficiencias del sistema tradicional que pudiesen resolverse utilizando la tecnología. Este Trabajo de Fin de Grado (TFG) ha tenido como objetivo apoyar la labor iniciada por el GIETA, desarrollando un sistema de gestión de tutorías mediante una aplicación móvil. Para lograr este objetivo, inicialmente se realizó un proceso de reflexión sobre, entre otras cuestiones, la razón de ser de la aplicación a desarrollar, las ventajas que aportaría al usuario final, aquellos riesgos que podían amenazar al proyecto, etc. Este proceso se englobó dentro de la herramienta Agile Inception Deck. Tras este proceso de reflexión, se estructuró el proyecto en fases o sprints de desarrollo, en las que se llevó a cabo la implementación del resultado final de este TFG, una aplicación móvil para el sistema operativo Android, que aporta funcionalidad que resuelve todos los requisitos asociados a las distintas historias de usuario definidas para el proyecto. ABSTRACT With the rise of mobile technologies in recent years, it has become clear that management processes tend to be controlled through these technologies, allowing users to centralize all services as possible, using a device as common as the mobile phone, and access them quickly and easily. The tutorial system at the Technical University of Madrid is not an exception. Since it’s creation, the Group of Educational Innovation Tutorial Action has worked on the modernization of the management process that involves the tutorial system, looking for weaknesses of the traditional system that could be solved using technology. This TFG has aimed to support the work initiated by the GIETA, developing a tutorship management system through a mobile application. To achieve this goal, initially a process of reflection was held about, inter alia, the rationale for the application to be developed, the advantages it would bring to the final user, the risks that could threaten the project, etc. This process is encompassed within the Agile Inception Deck tool. After this process of reflection, the project was divided into phases or sprints, in which took place the implementation of the outcome of the TFG, a mobile application for the Android operating system, which provides functionality that meets all the requirements associated with the different user stories defined for the project.

Contribución a la localización en interiores basada en comunicaciones inalámbricas

Determinar con buena precisión la posición en la que se encuentra un terminal móvil, cuando éste se halla inmerso en un entorno de interior (centros comerciales, edificios de oficinas, aeropuertos, estaciones, túneles, etc), es el pilar básico sobre el que se sustentan un gran número de aplicaciones y servicios. Muchos de esos servicios se encuentran ya disponibles en entornos de exterior, aunque los entornos de interior se prestan a otros servicios específicos para ellos. Ese número, sin embargo, podría ser significativamente mayor de lo que actualmente es, si no fuera necesaria una costosa infraestructura para llevar a cabo el posicionamiento con la precisión adecuada a cada uno de los hipotéticos servicios. O, igualmente, si la citada infraestructura pudiera tener otros usos distintos, además del relacionado con el posicionamiento. La usabilidad de la misma infraestructura para otros fines distintos ofrecería la oportunidad de que la misma estuviera ya presente en las diferentes localizaciones, porque ha sido previamente desplegada para esos otros usos; o bien facilitaría su despliegue, porque el coste de esa operación ofreciera un mayor retorno de usabilidad para quien lo realiza. Las tecnologías inalámbricas de comunicaciones basadas en radiofrecuencia, ya en uso para las comunicaciones de voz y datos (móviles, WLAN, etc), cumplen el requisito anteriormente indicado y, por tanto, facilitarían el crecimiento de las aplicaciones y servicios basados en el posicionamiento, en el caso de poderse emplear para ello. Sin embargo, determinar la posición con el nivel de precisión adecuado mediante el uso de estas tecnologías, es un importante reto hoy en día. El presente trabajo pretende aportar avances significativos en este campo. A lo largo del mismo se llevará a cabo, en primer lugar, un estudio de los principales algoritmos y técnicas auxiliares de posicionamiento aplicables en entornos de interior. La revisión se centrará en aquellos que sean aptos tanto para tecnologías móviles de última generación como para entornos WLAN. Con ello, se pretende poner de relieve las ventajas e inconvenientes de cada uno de estos algoritmos, teniendo como motivación final su aplicabilidad tanto al mundo de las redes móviles 3G y 4G (en especial a las femtoceldas y small-cells LTE) como al indicado entorno WLAN; y teniendo siempre presente que el objetivo último es que vayan a ser usados en interiores. La principal conclusión de esa revisión es que las técnicas de triangulación, comúnmente empleadas para realizar la localización en entornos de exterior, se muestran inútiles en los entornos de interior, debido a efectos adversos propios de este tipo de entornos como la pérdida de visión directa o los caminos múltiples en el recorrido de la señal. Los métodos de huella radioeléctrica, más conocidos bajo el término inglés “fingerprinting”, que se basan en la comparación de los valores de potencia de señal que se están recibiendo en el momento de llevar a cabo el posicionamiento por un terminal móvil, frente a los valores registrados en un mapa radio de potencias, elaborado durante una fase inicial de calibración, aparecen como los mejores de entre los posibles para los escenarios de interior. Sin embargo, estos sistemas se ven también afectados por otros problemas, como por ejemplo los importantes trabajos a realizar para ponerlos en marcha, y la variabilidad del canal. Frente a ellos, en el presente trabajo se presentan dos contribuciones originales para mejorar los sistemas basados en los métodos fingerprinting. La primera de esas contribuciones describe un método para determinar, de manera sencilla, las características básicas del sistema a nivel del número de muestras necesarias para crear el mapa radio de la huella radioeléctrica de referencia, junto al número mínimo de emisores de radiofrecuencia que habrá que desplegar; todo ello, a partir de unos requerimientos iniciales relacionados con el error y la precisión buscados en el posicionamiento a realizar, a los que uniremos los datos correspondientes a las dimensiones y realidad física del entorno. De esa forma, se establecen unas pautas iniciales a la hora de dimensionar el sistema, y se combaten los efectos negativos que, sobre el coste o el rendimiento del sistema en su conjunto, son debidos a un despliegue ineficiente de los emisores de radiofrecuencia y de los puntos de captura de su huella. La segunda contribución incrementa la precisión resultante del sistema en tiempo real, gracias a una técnica de recalibración automática del mapa radio de potencias. Esta técnica tiene en cuenta las medidas reportadas continuamente por unos pocos puntos de referencia estáticos, estratégicamente distribuidos en el entorno, para recalcular y actualizar las potencias registradas en el mapa radio. Un beneficio adicional a nivel operativo de la citada técnica, es la prolongación del tiempo de usabilidad fiable del sistema, bajando la frecuencia en la que se requiere volver a capturar el mapa radio de potencias completo. Las mejoras anteriormente citadas serán de aplicación directa en la mejora de los mecanismos de posicionamiento en interiores basados en la infraestructura inalámbrica de comunicaciones de voz y datos. A partir de ahí, esa mejora será extensible y de aplicabilidad sobre los servicios de localización (conocimiento personal del lugar donde uno mismo se encuentra), monitorización (conocimiento por terceros del citado lugar) y seguimiento (monitorización prolongada en el tiempo), ya que todos ellas toman como base un correcto posicionamiento para un adecuado desempeño. ABSTRACT To find the position where a mobile is located with good accuracy, when it is immersed in an indoor environment (shopping centers, office buildings, airports, stations, tunnels, etc.), is the cornerstone on which a large number of applications and services are supported. Many of these services are already available in outdoor environments, although the indoor environments are suitable for other services that are specific for it. That number, however, could be significantly higher than now, if an expensive infrastructure were not required to perform the positioning service with adequate precision, for each one of the hypothetical services. Or, equally, whether that infrastructure may have other different uses beyond the ones associated with positioning. The usability of the same infrastructure for purposes other than positioning could give the opportunity of having it already available in the different locations, because it was previously deployed for these other uses; or facilitate its deployment, because the cost of that operation would offer a higher return on usability for the deployer. Wireless technologies based on radio communications, already in use for voice and data communications (mobile, WLAN, etc), meet the requirement of additional usability and, therefore, could facilitate the growth of applications and services based on positioning, in the case of being able to use it. However, determining the position with the appropriate degree of accuracy using these technologies is a major challenge today. This paper provides significant advances in this field. Along this work, a study about the main algorithms and auxiliar techniques related with indoor positioning will be initially carried out. The review will be focused in those that are suitable to be used with both last generation mobile technologies and WLAN environments. By doing this, it is tried to highlight the advantages and disadvantages of each one of these algorithms, having as final motivation their applicability both in the world of 3G and 4G mobile networks (especially in femtocells and small-cells of LTE) and in the WLAN world; and having always in mind that the final aim is to use it in indoor environments. The main conclusion of that review is that triangulation techniques, commonly used for localization in outdoor environments, are useless in indoor environments due to adverse effects of such environments as loss of sight or multipaths. Triangulation techniques used for external locations are useless due to adverse effects like the lack of line of sight or multipath. Fingerprinting methods, based on the comparison of Received Signal Strength values measured by the mobile phone with a radio map of RSSI Recorded during the calibration phase, arise as the best methods for indoor scenarios. However, these systems are also affected by other problems, for example the important load of tasks to be done to have the system ready to work, and the variability of the channel. In front of them, in this paper we present two original contributions to improve the fingerprinting methods based systems. The first one of these contributions describes a method for find, in a simple way, the basic characteristics of the system at the level of the number of samples needed to create the radio map inside the referenced fingerprint, and also by the minimum number of radio frequency emitters that are needed to be deployed; and both of them coming from some initial requirements for the system related to the error and accuracy in positioning wanted to have, which it will be joined the data corresponding to the dimensions and physical reality of the environment. Thus, some initial guidelines when dimensioning the system will be in place, and the negative effects into the cost or into the performance of the whole system, due to an inefficient deployment of the radio frequency emitters and of the radio map capture points, will be minimized. The second contribution increases the resulting accuracy of the system when working in real time, thanks to a technique of automatic recalibration of the power measurements stored in the radio map. This technique takes into account the continuous measures reported by a few static reference points, strategically distributed in the environment, to recalculate and update the measurements stored into the map radio. An additional benefit at operational level of such technique, is the extension of the reliable time of the system, decreasing the periodicity required to recapture the radio map within full measurements. The above mentioned improvements are directly applicable to improve indoor positioning mechanisms based on voice and data wireless communications infrastructure. From there, that improvement will be also extensible and applicable to location services (personal knowledge of the location where oneself is), monitoring (knowledge by other people of your location) and monitoring (prolonged monitoring over time) as all of them are based in a correct positioning for proper performance.

Evaluation and implementation of a hybrid cross-platform application combining mobile web-technologies and native device functions

Este Proyecto de Fin de Carrera presenta un prototipo de aplicación móvil híbrida multi-plataforma para Android y iOS. Las aplicaciones móviles híbridas son una combinación de aplicaciones web móviles y aplicaciones móviles nativas. Se desarrollan parcialmente con tecnologías web y pueden acceder a la capa nativa y sensores del teléfono. Para el usuario se presentan como aplicaciones nativas, ya que se pueden descargar de las tiendas de aplicaciones y son instaladas en el dispositivo. El prototipo consiste en la migración del módulo de noticias financieras de las aplicaciones actuales para móviles de una compañía bancaria reimplementándolo como aplicación híbrida utilizando uno de los entornos de desarrollo disponibles en el mercado para este propósito. El desarrollo de aplicaciones híbridas puede ahorrar tiempo y dinero cuando se pretende alcanzar más de una plataforma móvil. El objetivo es la evaluación de las ventajas e inconvenientes que ofrece el desarrollo de aplicaciones híbridas en términos de reducción de costes, tiempo de desarrollo y resultado final de la aplicación. El proyecto consta de varias fases. Durante la primera fase se realiza un estudio sobre las aplicaciones híbridas que podemos encontrar hoy en día en el mercado utilizando los ejemplos de linkedIn, Facebook y Financial times. Se hace hincapié en las tecnologías utilizadas, uso de la red móvil y problemas encontrados. Posteriormente se realiza una comparación de distintos entornos de desarrollo multi-plataforma para aplicaciones híbridas en términos de la estrategia utilizada, plataformas soportadas, lenguajes de programación, acceso a capacidades nativas de los dispositivos y licencias de uso. Esta primera fase da como resultado la elección del entorno de desarrollo más adecuado a las exigencias del proyecto, que es PhoneGap, y continua con un análisis más detallado de dicho entorno en cuanto a su arquitectura, características y componentes. La siguiente fase comienza con un estudio de las aplicaciones actuales de la compañía para extraer el código fuente necesario y adaptarlo a la arquitectura que tendrá la aplicación. Para la realización del prototipo se hace uso de la característica que ofrece PhoneGap para acceder a la capa nativa del dispositivo, esto es, el uso de plugins. Se diseña y desarrolla un plugin que permite acceder a la capa nativa para cada plataforma. Una vez desarrollado el prototipo para la plataforma Android, se migra y adapta para la plataforma iOS. Por último se hace una evaluación de los prototipos en cuanto a su facilidad y tiempo de desarrollo, rendimiento, funcionalidad y apariencia de la interfaz de usuario. ABSTRACT. This bachelor's thesis presents a prototype of a hybrid cross-platform mobile application for Android and iOS. Hybrid mobile applications are a combination of mobile web and mobile native applications. They are built partially with web technologies and they can also access native features and sensors of the device. For a user, they look like native applications as they are downloaded from the application stores and installed on the device. This prototype consists of the migration of the financial news module of current mobile applications from a financial bank reimplementing them as a hybrid application using one of the frameworks available in the market for that purpose. Development of applications on a hybrid way can help reducing costs and effort when targeting more than one platform. The target of the project is the evaluation of the advantages and disadvantages that hybrid development can offer in terms of reducing costs and efforts and the final result of the application. The project starts with an analysis of successfully released hybrid applications using the examples of linkedIn, Facebook and Financial Times, emphasizing the different used technologies, the transmitted network data and the encountered problems during the development. This analysis is followed by a comparison of most popular hybrid crossplatform development frameworks in terms of the different approaches, supported platforms, programming languages, access to native features and license. This first stage has the outcome of finding the development framework that best fits to the requirements of the project, that is PhoneGap, and continues with a deeper analysis of its architecture, features and components. Next stage analyzes current company's applications to extract the needed source code and adapt it to the architecture of the prototype. For the realization of the application, the feature that PhoneGap offers to access the native layer of the device is used. This feature is called plugin. A custom plugin is designed and developed to access the native layer of each targeted platform. Once the prototype is finished for Android, it is migrated and adapted to the iOS platform. As a final conclusion the prototypes are evaluated in terms of ease and time of development, performance, functionality and look and feel.

Learning&Information Technologies Cartography

Nowadays, many researches focus their efforts in studies and applications on the Learning area. However, there is a lack of a reference system that permits to know the positioning and the existing links between Learning and Information Technologies. This paper proposes a Cartography where explains the relationships between the elements that compose the Learning Theories and Information Technologies, considering the own features of the learner and the Information Technologies Properties. This intersection will allow us to know what Information Technologies Properties promote Learning Futures.

Abstraction-carrying code: a model for mobile code safety

Proof-Carrying Code (PCC) is a general approach to mobile code safety in which programs are augmented with a certificate (or proof). The intended benefit is that the program consumer can locally validate the certificate w.r.t. the "untrustcd" program by means of a certificate checker a process which should be much simpler, efficient, and automatic than generating the original proof. The practical uptake of PCC greatly depends on the existence of a variety of enabling technologies which allow both proving programs correct and replacing a costly verification process by an efficient checking proceduri on th( consumer side. In this work we propose Abstraction- Carrying Code (ACC), a novel approach which uses abstract interpretation as enabling technology. We argue that the large body of applications of abstract interpretation to program verification is amenable to the overall PCC scheme. In particular, we rely on an expressive class of safely policies which can be defined over different abstract domains. We use an abstraction (or abstract model) of the program computed by standard static analyzers as a certificate. The validity of the abstraction on ihe consumer side is checked in a single pass by a very efficient and specialized abstract-interpreter. We believe that ACC brings the expressiveness, flexibility and automation which is inherent in abstract interpretation techniques to the area of mobile code safety.

Mobile Indoor Augmented Reality. Exploring applications in hospitality environments.

Augmented reality (AR) is been increasingly used in mobile devices. Most of the available applications are set to work outdoors, mainly due to the availability of a reliable positioning system. Nevertheless, indoor (smart) spaces offer a lot of opportunities of creating new service concepts. In particular, in this paper we explore the applicability of mobile AR to hospitality environments (hotels and similar establishments). From the state-of-the-art of technologies and applications, a portfolio of services has been identified and a prototype using off-the-shelf technologies has been designed. Our objective is to identify the next technological challenges to overcome in order to have suitable underlying infrastructures and innovative services which enhance the traveller?s experience.

Enhancing Interaction With Smart Objects Throught Mobile Devices

Interaction with smart objects can be accomplished with different technologies, such as tangible interfaces or touch computing, among others. Some of them require the object to be especially designed to be 'smart', and some other are limited in the variety and complexity of the possible actions. This paper describes a user-smart object interaction model and prototype based on the well known event-condition-action (ECA) reasoning, which can work, to a degree, independently of the intelligence embedded into the smart object. It has been designed for mobile devices to act as mediators between users and smart objects and provides an intuitive means for personalization of object's behavior. When the user is close to an object, this one publishes its 'event & action' capabilities to the user's device. The user may accept the object's module offering, which will enable him to configure and control that object, but also its actions with respect to other elements of the environment or the virtual world. The modular ECA interaction model facilitates the integration of different types of objects in a smart space, giving the user full control of their capabilities and facilitating creative mash-uping to build customized functionalities that combine physical and virtual actions

Analysis of QoS Parameter in AODV a DSR in Mobile Ad Hoc Networks

Providing QoS in the context of Ad Hoc networks includes a very wide field of application from the perspective of every level of the architecture in the network. Saying It in another way, It is possible to speak about QoS when a network is capable of guaranteeing a trustworthy communication in both extremes, between any couple of the network nodes by means of an efficient Management and administration of the resources that allows a suitable differentiation of services in agreement with the characteristics and demands of every single application.The principal objective of this article is the analysis of the quality parameters of service that protocols of routering reagents such as AODV and DSR give in the Ad Hoc mobile Networks; all of this is supported by the simulator ns-2. Here were going to analyze the behavior of some other parameters like effective channel, loss of packages and latency in the protocols of routering. Were going to show you which protocol presents better characteristics of Quality of Service (QoS) in the MANET networks.

Gesture recognition using mobile phone's inertial sensors

The availability of inertial sensors embedded in mobile devices has enabled a new type of interaction based on the movements or “gestures” made by the users when holding the device. In this paper we propose a gesture recognition system for mobile devices based on accelerometer and gyroscope measurements. The system is capable of recognizing a set of predefined gestures in a user-independent way, without the need of a training phase. Furthermore, it was designed to be executed in real-time in resource-constrained devices, and therefore has a low computational complexity. The performance of the system is evaluated offline using a dataset of gestures, and also online, through some user tests with the system running in a smart phone.

Assessment of "mobile mapping system": A GIS-based support methodology

In this article, the authors examine the current status of different elements that integrate the landscape of the municipality of Olias del Rey in Toledo (Spain). A methodology for the study of rural roads, activity farming and local hunting management. We used Geographic Information Technologies (GIT) in order to optimize spatial information including the design of a Geographic Information System (GIS). In the acquisition of field data we have used vehicle "mobile mapping" instrumentation equipped with GNSS, LiDAR, digital cameras and odometer. The main objective is the integration of geoinformation and geovisualization of the information to provide a fundamental tool for rural planning and management.

Contribution to flexible service coordination in mobile prosumer environments

Este trabajo de Tesis se desarrolla en el marco de los escenarios de ejecución distribuida de servicios móviles y contribuye a la definición y desarrollo del concepto de usuario prosumer. El usuario prosumer se caracteriza por utilizar su teléfono móvil para crear, proveer y ejecutar servicios. Este nuevo modelo de usuario contribuye al avance de la sociedad de la información, ya que el usuario prosumer se transforma de creador de contenidos a creador de servicios (estos últimos formados por contenidos y la lógica para acceder a ellos, procesarlos y representarlos). El objetivo general de este trabajo de Tesis es la provisión de un modelo de creación, distribución y ejecución de servicios para entorno móvil que permita a los usuarios no programadores (usuarios prosumer), pero expertos en un determinado dominio, crear y ejecutar sus propias aplicaciones y servicios. Para ello se definen, desarrollan e implementan metodologías, procesos, algoritmos y mecanismos adaptables a dominios específicos, para construir entornos de ejecución distribuida de servicios móviles para usuarios prosumer. La provisión de herramientas de creación adaptadas a usuarios no expertos es una tendencia actual que está siendo desarrollada en distintos trabajos de investigación. Sin embargo, no se ha propuesto una metodología de desarrollo de servicios que involucre al usuario prosumer en el proceso de diseño, desarrollo, implementación y validación de servicios. Este trabajo de Tesis realiza un estudio de las metodologías y tecnologías más innovadoras relacionadas con la co‐creación y utiliza este análisis para definir y validar una metodología que habilita al usuario para ser el responsable de la creación de servicios finales. Siendo los entornos móviles prosumer (mobile prosumer environments) una particularización de los entornos de ejecución distribuida de servicios móviles, en este trabajo se tesis se investiga en técnicas de adaptación, distribución, coordinación de servicios y acceso a recursos identificando como requisitos las problemáticas de este tipo de entornos y las características de los usuarios que participan en los mismos. Se contribuye a la adaptación de servicios definiendo un modelo de variabilidad que soporte la interdependencia entre las decisiones de personalización de los usuarios, incorporando mecanismos de guiado y detección de errores. La distribución de servicios se implementa utilizando técnicas de descomposición en árbol SPQR, cuantificando el impacto de separar cualquier servicio en distintos dominios. Considerando el plano de comunicaciones para la coordinación en la ejecución de servicios distribuidos hemos identificado varias problemáticas, como las pérdidas de enlace, conexiones, desconexiones y descubrimiento de participantes, que resolvemos utilizando técnicas de diseminación basadas en publicación subscripción y algoritmos Gossip. Para lograr una ejecución flexible de servicios distribuidos en entorno móvil, soportamos la adaptación a cambios en la disponibilidad de los recursos, proporcionando una infraestructura de comunicaciones para el acceso uniforme y eficiente a recursos. Se han realizado validaciones experimentales para evaluar la viabilidad de las soluciones propuestas, definiendo escenarios de aplicación relevantes (el nuevo universo inteligente, prosumerización de servicios en entornos hospitalarios y emergencias en la web de la cosas). Abstract This Thesis work is developed in the framework of distributed execution of mobile services and contributes to the definition and development of the concept of prosumer user. The prosumer user is characterized by using his mobile phone to create, provide and execute services. This new user model contributes to the advancement of the information society, as the prosumer is transformed from producer of content, to producer of services (consisting of content and logic to access them, process them and represent them). The overall goal of this Thesis work is to provide a model for creation, distribution and execution of services for the mobile environment that enables non‐programmers (prosumer users), but experts in a given domain, to create and execute their own applications and services. For this purpose I define, develop and implement methodologies, processes, algorithms and mechanisms, adapted to specific domains, to build distributed environments for the execution of mobile services for prosumer users. The provision of creation tools adapted to non‐expert users is a current trend that is being developed in different research works. However, it has not been proposed a service development methodology involving the prosumer user in the process of design, development, implementation and validation of services. This thesis work studies innovative methodologies and technologies related to the co‐creation and relies on this analysis to define and validate a methodological approach that enables the user to be responsible for creating final services. Being mobile prosumer environments a specific case of environments for distributed execution of mobile services, this Thesis work researches in service adaptation, distribution, coordination and resource access techniques, and identifies as requirements the challenges of such environments and characteristics of the participating users. I contribute to service adaptation by defining a variability model that supports the dependency of user personalization decisions, incorporating guiding and error detection mechanisms. Service distribution is implemented by using decomposition techniques based on SPQR trees, quantifying the impact of separating any service in different domains. Considering the communication level for the coordination of distributed service executions I have identified several problems, such as link losses, connections, disconnections and discovery of participants, which I solve using dissemination techniques based on publish‐subscribe communication models and Gossip algorithms. To achieve a flexible distributed service execution in mobile environments, I support adaptation to changes in the availability of resources, while providing a communication infrastructure for the uniform and efficient access to resources. Experimental validations have been conducted to assess the feasibility of the proposed solutions, defining relevant application scenarios (the new intelligent universe, service prosumerization in hospitals and emergency situations in the web of things).