On the calculation of energy produced by a PV grid-connected system

This study develops a proposal of method of calculation useful to estimate the energy produced by a PV grid-connected system making use of irradiance-domain integrals and denition of statistical moment. Validation against database of real PV plants performance data shows that acceptable energy estimation can be obtained with rst to fourth statistical moments and some basic system parameters. This way, only simple calculations at the reach of pocket calculators, are enough to estimate AC energy.

Benchmarking of calculation schemes in Apollo2 and COBAYA3 for VVER lattices

This paper presents solutions of the NURISP VVER lattice benchmark using APOLLO2, TRIPOLI4 and COBAYA3 pin-by-pin. The main objective is to validate MOC based calculation schemes for pin-by-pin cross-section generation with APOLLO2 against TRIPOLI4 reference results. A specific objective is to test the APOLLO2 generated cross-sections and interface discontinuity factors in COBAYA3 pin-by-pin calculations with unstructured mesh. The VVER-1000 core consists of large hexagonal assemblies with 2mm inter-assembly water gaps which require the use of unstructured meshes in the pin-by-pin core simulators. The considered 2D benchmark problems include 19-pin clusters, fuel assemblies and 7-assembly clusters. APOLLO2 calculation schemes with the step characteristic method (MOC) and the higher-order Linear Surface MOC have been tested. The comparison of APOLLO2 vs.TRIPOLI4 results shows a very close agreement. The 3D lattice solver in COBAYA3 uses transport corrected multi-group diffusion approximation with interface discontinuity factors of GET or Black Box Homogenization type. The COBAYA3 pin-by-pin results in 2, 4 and 8 energy groups are close to the reference solutions when using side-dependent interface discontinuity factors.

Calibration of calculation models of wooden guardrails with Operational Modal Analysis

This study analyses the differences between two calculation models for guardrails on building sites that use wooden boards and tubular steel posts. Wood was considered an isotropic material in one model and an orthotropic material in a second model. The elastic constants of the wood were obtained with ultrasound. Frequencies and vibration modes were obtained for both models through linear analysis using the finite element method. The two models were experimentally calibrated through operational modal analysis. The results obtained show that for the three types of wood under analysis, the model which considered them as an orthotropic material fitted the experimental results better than the model which considered them as an isotropic material.

An interactive method of fuzzy probability elicitation in risk analysis

Expert knowledge is used to assign probabilities to events in many risk analysis models. However, experts sometimes find it hard to provide specific values for these probabilities, preferring to express vague or imprecise terms that are mapped using a previously defined fuzzy number scale. The rigidity of these scales generates bias in the probability elicitation process and does not allow experts to adequately express their probabilistic judgments. We present an interactive method for extracting a fuzzy number from experts that represents their probabilistic judgments for a given event, along with a quality measure of the probabilistic judgments, useful in a final information filtering and analysis sensitivity process.

Teaching based on the case method of building collective protection

One of the fundamental aspects in the adaptation of the teaching to the European higher education is changing based models of teacher education to models based on student learning. In this work we present an educational experience developed with the teaching method based on the case method, with a clearly multidisciplinary. The experience has been developed in the teaching of analysis and verification of safety rails. This is a multidisciplinary field that presents great difficulties during their teaching. The use of the case method has given good results in the competences achieved by students

Development of a method of assessment of the problem-solving competence at the technical University of Madrid.

The competence evaluation promoted by the European High Education Area entails a very important methodological change that requires guiding support to help lecturers carry out this new and complex task. In this regard, the Technical University of Madrid (UPM, by its Spanish acronym) has financed a series of coordinated projects with the objective of developing a model for teaching and evaluating core competences and providing support to lecturers. This paper deals with the problem-solving competence. The first step has been to elaborate a guide for teachers to provide a homogeneous way to asses this competence. This guide considers several levels of acquisition of the competence and provides the rubrics to be applied for each one. The guide has been subsequently validated with several pilot experiences. In this paper we will explain the problem-solving assessment guide for teachers and will show the pilot experiences that has been carried out. We will finally justify the validity of the method to assess the problem-solving competence.

Development of a method of assessment of the problem-solving competency at the Technical University of Madrid

The competence evaluation promoted by the European High Education Area entails a very important methodological change that requires guiding support to help lecturers carry out this new and complex task. In this regard, the Technical University of Madrid (UPM, by its Spanish acronym) has financed a series of coordinated projects with the objective of developing a model for teaching and evaluating core competences and providing support to lecturers. This paper deals with the problem solving competence. The first step has been to elaborate a guide for teachers to provide an homogeneous way to asses this competence. This guide considers several levels of acquisition of the competence and provided the rubrics to be applied for each one. The guide has been subsequently validated with several pilot experiences. In this paper we will explain the problem-solving assessment guide for teachers and will show the pilot experiences that has been carried out. We will finally justify the validity of the method to assess the problem solving competence.

Initial design with L2 Monge-Kantorovich theory for the Monge–Ampère equation method of freeform optics

The Monge–Ampère (MA) equation arising in illumination design is highly nonlinear so that the convergence of the MA method is strongly determined by the initial design. We address the initial design of the MA method in this paper with the L2 Monge-Kantorovich (LMK) theory, and introduce an efficient approach for finding the optimal mapping of the LMK problem. Three examples, including the beam shaping of collimated beam and point light source, are given to illustrate the potential benefits of the LMK theory in the initial design. The results show the MA method converges more stably and faster with the application of the LMK theory in the initial design.

A bankable method of assessing the performance of a CPV plant

Concentrating Photovoltaics (CPV) is an alternative to flat-plate module photovoltaic (PV) technology. The bankability of CPV projects is an important issue to pave the way toward a swift and sustained growth in this technology. The bankability of a PV plant is generally addressed through the modeling of its energy yield under a baseline loss scenario, followed by an on-site measurement campaign aimed at verifying its energy performance. This paper proposes a procedure for assessing the performance of a CPV project, articulated around four main successive steps: Solar Resource Assessment, Yield Assessment, Certificate of Provisional Acceptance, and Certificate of Final Acceptance. This methodology allows the long-term energy production of a CPV project to be estimated with an associated uncertainty of ≈5%. To our knowledge, no such method has been proposed to the CPV industry yet, and this critical situation has hindered or made impossible the completion of several important CPV projects undertaken in the world. The main motive for this proposed method is to bring a practical solution to this urgent problem. This procedure can be operated under a wide range of climatic conditions, and makes it possible to assess the bankability of a CPV plant whose design uses any of the technologies currently available on the market. The method is also compliant with both international standards and local regulations. In consequence, its applicability is both general and international.

Effect of type of fiber, site of fermentation, and method of analysis on digestibility of soluble and insoluble fiber in rabbits

The effect of type of fiber, site of fermetation, method for quantifying insoluble and soluble dietary fiber, and their correction for intestinal mucin on fiber digestibility were examined in rabbits. Three diets differing in soluble fiber were formulated (8.5% soluble fiber, on DM basis, in the low soluble fiber [LSF] diet; 10.2% in the medium soluble fiber [MSF] diet; and 14.5% in the high soluble fiber [HSF] diet). They were obtained by replacing half of the dehydrated alfalfa in the MSF diet with a mixture of beet and apple pulp (HSF diet) or with a mix of oat hulls and soybean protein (LSF diet). Thirty rabbits with ileal T-cannulas were used to determine ileal and fecal digestibility. Cecal digestibility was determined by difference between fecal and ileal digestibility. Insoluble fiber was measured as NDF, insoluble dietary fiber (IDF), and in vitro insoluble fiber, whereas soluble fiber was calculated as the difference between total dietary fiber (TDF) and NDF (TDF_NDF), IDF (TDF-IDF), and in vitro insoluble fiber (TDF-in vitro insoluble fiber). The intestinal mucin content was used to correct the TDF and soluble fiber digestibility. Ileal and fecal concentration of mucin increased from the LSF to the HSF diet group (P < 0.01). Once corrected for intestinal mucin, ileal and fecal digestibility of TDF and soluble fiber increased whereas cecal digestibility decreased (P < 0.01). Ileal digestibility of TDF increased from the LSF to the HSF diet group (12.0 vs. 28.1%; P < 0.01), with no difference in the cecum (26.4%), resulting in a higher fecal digestibility from the LSF to the HSF diet group (P < 0.01). Ileal digestibility of insoluble fiber increased from the LSF to the HSF diet group (11.3 vs. 21.0%; P < 0.01), with no difference in the cecum (13.9%) and no effect of fiber method, resulting in a higher fecal digestibility for rabbits fed the HSF diet compared with the MSF and LSF diets groups (P < 0.01).Fecal digestibility of NDF was higher compared with IDF or in vitro insoluble fiber (P < 0.01). Ileal soluble fiber digestibility was higher for the HSF than for the LSF diet group (43.6 vs. 14.5%; P < 0.01) and fiber method did not affect it. Cecal soluble fiber digestibility decreased from the LSF to the HSF diet group (72.1 vs. 49.2%; P < 0.05). The lowest cecal and fecal soluble fiber digestibility was measured using TDF-NDF (P < 0.01). In conclusion, a correction for intestinal mucin is necessary for ileal TDF and soluble fiber digestibility whereas the selection of the fiber method has a minor relevance. The inclusion of sugar beet and apple pulp increased the amount of TDF fermented in the small intestine.

A consistent method of analysis of RC shell structures

In this paper some topics related to the design of reinforced concrete (RC) shells are addressed. The influence of the reinforcement layout on the service and ultimate behavior of the shell structure is commented. The well established methodology for dimensioning and verifying RC sections of beam structures is extended. In this way it is possible to treat within a unified procedure the design and verification of RC two dimensional structures, in particular membrane and shell structures. Realistic design situations as multiple steel farnilies and non orthogonal reinforcement layout can be handled. Finally, some examples and applications of the proposed methodology are presented.

Repercusión medioambiental del uso de la cerámica estructural en España. Energía embebida y huella de carbono

La producción y el transporte a obra de los productos cerámicos de carácter estructural suponen un importante consumo energético, que conlleva la emisión de gases de efecto invernadero a la atmósfera. El objetivo de la presente Tesis es demostrar la existencia de importantes diferencias en el valor del impacto ambiental asociado a los productos de cerámica estructural fabricados en España, y que estas diferencias podrían quedar cuantificadas y reflejadas mediante un análisis de Huella de Carbono y de la Energía Embebida. Se parte de la inexistencia en España, de base de datos contrastada y consensuada, que establezca las cargas medioambientales en función del tipo de producto cerámico a utilizar. Se realiza en la primera parte del estudio una revisión del estado actual de la Huella de Carbono y la Energía Embebida en el campo de los materiales de construcción, y más concretamente en el sector de la cerámica estructural, que sirve para acotar los límites del estudio y justificar el objeto de la Tesis. La investigación se acota a las etapas de producción y transporte a obra de los productos (estudio cuna a puerta con opciones), al considerar que son éstas, a priori, las que tienen una mayor incidencia en el comportamiento ambiental del producto. Siguiendo los pasos definidos en la normativa aplicable (definición del mapa de procesos – límites y alcance – inventario – cálculo y evaluación), se establece un método específico de identificación y cuantificación de las variables que determinan la Huella de Carbono y Energía Embebida de los productos cerámicos, en función de la tipología de producto. La información necesaria (inventario) se obtiene principalmente con recogida de datos “in situ” de fábricas de productos cerámicos, lo que garantiza que la información tratada en este estudio es de primer nivel. La información se complementa/contrasta con fuentes bibliográficas. Se determinan 6 variables con influencia global en el impacto ambiental, 44 variables principales y 39 secundarias, estableciendo las fórmulas de cálculo a partir de dichas variables. Los resultados de cálculo y evaluación determinan que, para unas mismas condiciones de fabricación, las diferencias entre productos cerámicos llegan hasta un 27% para la Huella de Carbono y un 35% para Energía Embebida. La relevancia que alcanza el impacto asociado al transporte del producto a obra puede llegar hasta un 40% del total. El método de cálculo y las fórmulas desarrolladas se integran en una hoja de cálculo, para el cálculo de Huella de Carbono y Energía Embebida de los productos cerámicos, que permite, a su vez, conocer la repercusión medioambiental que tiene la introducción de modificaciones o innovaciones en el proceso de producción o transporte a obra. Así mismo, el trabajo desarrollado ha servido para poner en relieve una serie de problemas y falta de información en el campo de la cerámica estructural y el medioambiente que pueden ser objeto de futuras líneas de investigación, tanto para el sector de la edificación como para la comunidad científica, pudiendo implementar la metodología desarrollada en otras investigaciones. Se considera que la investigación realizada y sus resultados suponen una aportación importante para conocer y reducir el impacto ambiental de los edificios, desde la perspectiva del ciclo de vida y considerando que el impacto ambiental de un edificio comienza desde el momento en que se extraen las materias primas para la fabricación de los materiales con los que se construyen los edificios. ABSTRACT The production and transport of structural ceramic products involves an important energy consumption, which leads to the emission of greenhouse gases into the atmosphere. The objective of the research is to demonstrate the existence of significant differences in the value of the environmental impact of structural ceramic products manufactured in Spain, and these differences could be quantified by the Carbon Footprint and Embodied Energy. It starts from the absence in Spain, of contrasted and agreed databases that establish the environmental loads depending on the type of ceramic product. In the first part of the study reviews the current state of the Carbon Footprint and Embedded Energy in the field of building materials, and more specifically in the field of structural ceramics, which serves to limit the scope of the study and justify the purpose of this Thesis. The Research is bounded to production and transportation stages of (cradle to gate with options), considering they are the stages that have a greater impact on the environmental performance of the product. Following the steps defined in applicable rules (definition of process map - boundaries and scope – inventory analysis- calculation and impact assessment), it sets a specific method for the identification and quantification of the variables that determine the Carbon Footprint and Embedded Energy of structural ceramic products, depending on the type of product. The information (inventory) is given mainly with a data collection in ceramic factories (and in a consultation with the manufactures of the products), ensuring that the information handled in this Thesis is a first rate data. It is established 6 variables with a global influence in the environmental impact, 44 primary and 39 secondary variables, establishing calculation formula from these variables. The results of calculation and assessment determined that, for same manufacturing conditions, the differences between ceramic products reach 27% for Carbon Footprint and 35% for Embodied Energy. The relevance that reaches the impact of transport can reach 40% of the total. The method of calculation and formulas developed are integrated into a simple calculation tool, excel base, to calculate the Carbon Footprint and Embodied Energy of structural ceramic products, which allows, know the environmental impact of changes or innovations in the production process or transport to work. The work also has served to find a problems and gaps in the field of structural ceramics and the environment that may well be the subject of future research, both for the building sector to the scientific community, implementing the methodology developed in other research. It is considered that the research and its results represent an important contribution to understand and reduce the environmental impact of buildings from the perspective of the life cycle, considering that the environmental impact of a building starts from the time that the raw materials are extracted for the manufacture of building materials.

Estudio dinámico de cimentaciones en obras portuarias

Los diques de abrigo verticales son estructuras monolíticas que sirven para reflejar el oleaje creando, de este modo, una zona abrigada en el lado tierra. Son estructuras de contención de gravedad, es decir, su peso es el elemento resistente fundamental. Las solicitaciones sobre estas estructuras son de tipo dinámico (oleaje) y consisten, fundamentalmente, en un empuje frontal y una subpresión en la base que varían en el tiempo. Habitualmente, las acciones sobre los diques de abrigo se establecen mediante fórmulas empíricas, que se describen en la presente tesis si bien, para obras de especial importancia, suelen medirse en modelos reducidos de laboratorio. Cuando el cimiento en que han de apoyarse estas estructuras no presenta una resistencia al corte suficiente, el apoyo se realiza en banquetas que redistribuyen la carga y que están formadas por materiales granulares. En la práctica habitual para conocer la estabilidad de estas estructuras frente a un temporal, tras establecer las acciones de cálculo (empuje frontal y subpresión) se efectúa un cálculo pseudoestático en el que se consideran condiciones drenadas o no drenadas del cimiento en función de su permeabilidad. Se conoce que en los suelos saturados, bajo cargas cíclicas, tiende a producirse una elevación de las presiones intersticiales y una reducción de tensiones efectivas así como una degradación del módulo de deformación tangencial en función del número de ciclos de carga, pudiéndose producir el fenómeno conocido como licuefacción (arenas) o movilidad cíclica (suelos más finos). El objeto de la tesis es explorar la posibilidad, con la tecnología actual, de analizar la estabilidad de los diques de abrigo verticales en cuyo cimiento existen suelos blandos, proponiendo un procedimiento para evaluar la estabilidad dinámica en este tipo de obras. Para ello se han revisado los procedimientos actualmente utilizados para definir las acciones de cálculo, los principales modelos de comportamiento dinámicos de suelos saturados disponibles y los procedimientos de cálculo. Una vez investigado el estado del arte sobre este tema, se propone un procedimiento de cálculo en el que, utilizando el programa comercial FLAC, se establecen las acciones cíclicas sobre un dique de abrigo vertical tipo con distintas condiciones de apoyo, aplicando, para el cimiento, un modelo de comportamiento tipo hiperbólico con generación de presiones intersticiales cuyos parámetros pueden obtenerse de ensayos de campo y laboratorio. Por último, una vez descrito el procedimiento, se aplica a un caso real en el que se produjo un fallo en la cimentación que desembocó en el hundimiento de parte de un dique vertical situado en el puerto de Barcelona, presentándose los resultados obtenidos del análisis efectuado y comparándolos con los obtenidos utilizando los métodos de cálculo habituales. Vertical breakwaters are monolithic structures built to reflect sea waves, thereby providing a sheltered area on the land side. They are gravity retaining structures, that is, their own weight is their basic resisting mechanism. Loads acting on these structures are dynamic (waves) and consist essentially in a frontal thrust and an uplift pressure on the base, which both vary over time. Usually, actions in breakwater design are established by empirical formulas, which are described in this thesis. For works of particular importance, such forces are measured in small-scale laboratory tests. When there are no soils with enough shear strength under the planned vertical breakwaters, they usually rest on granular berms which redistribute the load. Nowadays, after establishing the acting forces on the breakwater (front push and uplift pressure), a pseudostatic calculation (with drained or undrained conditions depending on the foundation permeability) is normally done to analyze the stability of these structures against storm waves. It is known that pore pressures tend to rise in saturated soils under cyclic loading and, consequently, there is a reduction of effective stress. A degradation of the shear modulus also occurs depending on the number of load cycles. All of these effects can bring about the phenomenon known as liquefaction in sands or cyclic mobility in fine-grained soils. The aim of the thesis is to explore the possibility that current technology provides to analyze the stability of vertical breakwaters founded on soft soils, and to suggest a method to evaluate the dynamic stability in this type of works. To this end, a review has been made of procedures currently used to define the actions in calculations, the main models of dynamic behaviour of saturated soils available and of calculation procedures. Once the state of the art on this subject has been reviewed, a method of calculation is proposed that uses the commercial program FLAC and is applied to a typical vertical breakwater on a range of different foundation conditions. For the foundation soil, a hyperbolic constitutive model with pore pressure generation has been employed, whose parameters can be obtained from field and laboratory tests. Finally, the described procedure is applied to an actual case where a foundation failure occurred that led to the sinking of several caissons in a vertical breakwater located in the port of Barcelona. The results obtained with the proposed method are compared with those obtained using conventional methods.