On the monitoring of surface displacement in connection with volcano reactivation in Tenerife, Canary Islands, using space techniques

Geodetic volcano monitoring in Tenerife has mainly focused on the Las Cañadas Caldera, where a geodetic micronetwork and a levelling profile are located. A sensitivity test of this geodetic network showed that it should be extended to cover the whole island for volcano monitoring purposes. Furthermore, InSAR allowed detecting two unexpected movements that were beyond the scope of the traditional geodetic network. These two facts prompted us to design and observe a GPS network covering the whole of Tenerife that was monitored in August 2000. The results obtained were accurate to one centimetre, and confirm one of the deformations, although they were not definitive enough to confirm the second one. Furthermore, new cases of possible subsidence have been detected in areas where InSAR could not be used to measure deformation due to low coherence. A first modelling attempt has been made using a very simple model and its results seem to indicate that the deformation observed and the groundwater level variation in the island may be related. Future observations will be necessary for further validation and to study the time evolution of the displacements, carry out interpretation work using different types of data (gravity, gases, etc) and develop models that represent the island more closely. The results obtained are important because they might affect the geodetic volcano monitoring on the island, which will only be really useful if it is capable of distinguishing between displacements that might be linked to volcanic activity and those produced by other causes. One important result in this work is that a new geodetic monitoring system based on two complementary techniques, InSAR and GPS, has been set up on Tenerife island. This the first time that the whole surface of any of the volcanic Canary Islands has been covered with a single network for this purpose. This research has displayed the need for further similar studies in the Canary Islands, at least on the islands which pose a greater risk of volcanic reactivation, such as Lanzarote and La Palma, where InSAR techniques have been used already.

Testing a GIS-based methodology for optimal location of Pumped Storage power plants in Norway

Europe needs to restructure its energy system. The aim to decrease the reliance on fossil fuels to a higher dependence on renewable energy has now been imposed by The European Commission. In order to achieve this goal there is a great interest in Norway to become "The Green Battery of Europe". In the pursuit of this goal a GIS-tool was created to investigate the pump storage potential in Norway. The tool searches for possible connections between existing reservoirs and dams with the criteria selected by the user. The aim of this thesis was to test the tool and see if the results suggested were plausible, develop a cost calculation method for the PSH lines, and make suggestions for further development of the tool. During the process the tool presented many non-feasible pumped storage hydropower (PSH) connections. The area of Telemark was chosen for the more detailed study. The results were discussed and some improvements were suggested for further development of the tool. Also a sensitivity test was done to see which of the parameters set by the user are the most relevant for the PSH connection suggestion. From a range of the most promising PSH plants suggested by the tool, the one between Songavatn and Totak was chosen for a case study, where there already exists a power plant between both reservoirs. A new Pumped Storage Plant was designed with a power production of 1200 MW. There are still many topics open to discussion, such as how to deal with environmental restrictions, or how to deal with inflows and outflows of the reservoirs from the existing power plants. Consequently the GIS-tool can be a very useful tool to establish the best possible connections between existing reservoirs and dams, but it still needs a deep study and the creation of new parameters for the user.

Análisis molecular de sistemas génicos implicados en la homeostasis de níquel y eficiencia simbiótica en Rhizobium leguminosarum

Los suelos ultramáficos, que poseen elevadas concentraciones de níquel, cobalto y cromo de manera natural, son fuente de bacterias resistentes a altas concentraciones de metales. Se realizó la caracterización físico-química de seis suelos ultramáficos del suroeste europeo, seleccionándose un suelo de la región de Gorro, Italia, como el más adecuado para aislar bacterias endosimbióticas resistentes a metales. A partir de plantas-trampa de guisante y lenteja inoculados con suspensiones de ese suelo, se obtuvieron 58 aislados de Rhizobium leguminosarum bv. viciae (Rlv) que fueron clasificados en 13 grupos según análisis de PCR-RAPDs. Se determinó la resistencia a cationes metálicos [Ni(II), Co(II), Cu(II), Zn(II)] de una cepa representante de cada grupo, así como la secuencia de los genomas de las cepas que mostraron altos niveles (UPM1137 y UPM1280) y bajos niveles (UPM1131 y UPM1136) de tolerancia a metales. Para identificar mecanismos de resistencia a metales se realizó una mutagénesis al azar en dicha cepa mediante la inserción de un minitransposón. El análisis de 4313 transconjugantes permitió identificar 14 mutantes que mostraron una mayor sensibilidad a Ni(II) que la cepa silvestre. Se determinó el punto de inserción del minitransposón en todos ellos y se analizaron en más detalle dos de los mutantes (D2250 y D4239). En uno de los mutantes (D2250), el gen afectado codifica para una proteína que presenta un 44% de identidad con dmeF (divalent efflux protein) de Cupriavidus metallidurans. Cadena arriba de dmeF se identificó un gen que codifica una proteína con un 39% de identidad con el regulador RcnR de Escherichia coli. Se decidió nombrar a este sistema dmeRF, y se generó un mutante en ambos genes en la cepa Rlv SPF25 (Rlv D15). A partir de experimentos de análisis fenotípico y de regulación se pudo demostrar que el sistema dmeRF tiene un papel relevante en la resistencia a Ni(II) y sobre todo a Co(II) en células en vida libre y en simbiosis con plantas de guisante. Ambos genes forman un operón cuya expresión se induce en respuesta a la presencia de Ni(II) y Co(II). Este sistema se encuentra conservado en distintas especies del género Rhizobium como un mecanismo general de resistencia a níquel y cobalto. Otro de los mutantes identificados (D4239), tiene interrumpido un gen que codifica para un regulador transcripcional de la familia AraC. Aunque inicialmente fue identificado por su sensibilidad a níquel, experimentos posteriores demostraron que su elevada sensibilidad a metales era debida a su sensibilidad al medio TY, y más concretamente a la triptona presente en el medio. En otros medios de cultivo el mutante no está afectado específicamente en su tolerancia a metales. Este mutante presenta un fenotipo simbiótico inusual, siendo inefectivo en guisantes y efectivo en lentejas. Análisis de complementación y de mutagénesis dirigida sugieren que el fenotipo de la mutación podría depender de otros factores distintos del gen portador de la inserción del minitransposón. ABSTRACT Ultramafic soils, having naturally high concentrations of nickel, cobalt and chrome, are potential sources of highly metal-resistant bacteria. A physico-chemical characterization of six ultramafic soils from the European southwest was made. A soil from Gorro, Italy, was chosen as the most appropriated for the isolation of heavy-metal-resistant endosymbiotic bacteria. From pea and lentil trap plants inoculated with soil suspensions, 58 isolates of Rhizobium leguminosarum bv. viciae (Rlv) were obtained and classified into 13 groups based on PCR-RAPDs analysis. The resistance to metallic cations [Ni(II), Co(II), Cu(II), Zn(II)] was analyzed in a representative strain of each group. From the results obtained in the resistance assays, the Rlv UPM1137 strain was selected to identify metal resistance mechanism. A random mutagenesis was made in UPM1137 by using minitransposon insertion. Analysis of 4313 transconjugants allowed to identify 14 mutants with higher sensitivity to Ni(II) than the wild type strain. The insertion point of the minitransposon was determined in all of them, and two mutants (D2250 and D4239) were studied in more detail. In one of the mutants (D2250), the affected gene encodes a protein with 44% identity in compared with DmeF (divalent efflux protein) from Cupriavidus metallidurans. Upstream R. leguminosarum dmeF, a gene encoding a protein with 39% identity with RcnR regulator from E. coli was identified. This protein was named DmeR. A mutant with both genes in the dmeRF deleted was generated and characterized in Rlv SPF25 (Rlv D15). From phenotypic and regulation analysis it was concluded that the dmeRF system is relevant for Ni(II) and specially Co(II) tolerance in both free living and symbiotic forms of the bacteria. This system is conserved in different Rhizobium species like a general mechanism for nickel and cobalt resistance. Other of the identified mutants (D4239) contains the transposon insert on a gene that encodes for an AraC-like transcriptional regulator. Although initially this mutant was identified for its nickel sensitivity, futher experiments demonstrated that its high metal sensitivity is due to its sensitivity to the TY medium, specifically for the tryptone. In other media the mutant is not affected specifically in their tolerance to metals. This mutant showed an unusual symbiotic phenotype, being ineffective in pea and effective in lentil. Complementation analysis and directed mutagenesis suggest that the mutation phenotype could depend of other factors different from the insertion minitransposon gene.

Contribution to the Analysis, Design and Assessment of Compact Antenna Test Ranges At Millimeter Wavelengths - Contribución al Análisis, Diseño y Caracterización de Sistemas de Medida de Antenas en Rango Compacto para Frecuencias Milimétricas

This Doctoral Thesis entitled Contribution to the analysis, design and assessment of compact antenna test ranges at millimeter wavelengths aims to deepen the knowledge of a particular antenna measurement system: the compact range, operating in the frequency bands of millimeter wavelengths. The thesis has been developed at Radiation Group (GR), an antenna laboratory which belongs to the Signals, Systems and Radiocommunications department (SSR), from Technical University of Madrid (UPM). The Radiation Group owns an extensive experience on antenna measurements, running at present four facilities which operate in different configurations: Gregorian compact antenna test range, spherical near field, planar near field and semianechoic arch system. The research work performed in line with this thesis contributes the knowledge of the first measurement configuration at higher frequencies, beyond the microwaves region where Radiation Group features customer-level performance. To reach this high level purpose, a set of scientific tasks were sequentially carried out. Those are succinctly described in the subsequent paragraphs. A first step dealed with the State of Art review. The study of scientific literature dealed with the analysis of measurement practices in compact antenna test ranges in addition with the particularities of millimeter wavelength technologies. Joint study of both fields of knowledge converged, when this measurement facilities are of interest, in a series of technological challenges which become serious bottlenecks at different stages: analysis, design and assessment. Thirdly after the overview study, focus was set on Electromagnetic analysis algorithms. These formulations allow to approach certain electromagnetic features of interest, such as field distribution phase or stray signal analysis of particular structures when they interact with electromagnetic waves sources. Properly operated, a CATR facility features electromagnetic waves collimation optics which are large, in terms of wavelengths. Accordingly, the electromagnetic analysis tasks introduce an extense number of mathematic unknowns which grow with frequency, following different polynomic order laws depending on the used algorithmia. In particular, the optics configuration which was of our interest consisted on the reflection type serrated edge collimator. The analysis of these devices requires a flexible handling of almost arbitrary scattering geometries, becoming this flexibility the nucleus of the algorithmia’s ability to perform the subsequent design tasks. This thesis’ contribution to this field of knowledge consisted on reaching a formulation which was powerful at the same time when dealing with various analysis geometries and computationally speaking. Two algorithmia were developed. While based on the same principle of hybridization, they reached different order Physics performance at the cost of the computational efficiency. Inter-comparison of their CATR design capabilities was performed, reaching both qualitative as well as quantitative conclusions on their scope. In third place, interest was shifted from analysis - design tasks towards range assessment. Millimetre wavelengths imply strict mechanical tolerances and fine setup adjustment. In addition, the large number of unknowns issue already faced in the analysis stage appears as well in the on chamber field probing stage. Natural decrease of dynamic range available by semiconductor millimeter waves sources requires in addition larger integration times at each probing point. These peculiarities increase exponentially the difficulty of performing assessment processes in CATR facilities beyond microwaves. The bottleneck becomes so tight that it compromises the range characterization beyond a certain limit frequency which typically lies on the lowest segment of millimeter wavelength frequencies. However the value of range assessment moves, on the contrary, towards the highest segment. This thesis contributes this technological scenario developing quiet zone probing techniques which achieves substantial data reduction ratii. Collaterally, it increases the robustness of the results to noise, which is a virtual rise of the setup’s available dynamic range. In fourth place, the environmental sensitivity of millimeter wavelengths issue was approached. It is well known the drifts of electromagnetic experiments due to the dependance of the re sults with respect to the surrounding environment. This feature relegates many industrial practices of microwave frequencies to the experimental stage, at millimeter wavelengths. In particular, evolution of the atmosphere within acceptable conditioning bounds redounds in drift phenomena which completely mask the experimental results. The contribution of this thesis on this aspect consists on modeling electrically the indoor atmosphere existing in a CATR, as a function of environmental variables which affect the range’s performance. A simple model was developed, being able to handle high level phenomena, such as feed - probe phase drift as a function of low level magnitudes easy to be sampled: relative humidity and temperature. With this model, environmental compensation can be performed and chamber conditioning is automatically extended towards higher frequencies. Therefore, the purpose of this thesis is to go further into the knowledge of millimetre wavelengths involving compact antenna test ranges. This knowledge is dosified through the sequential stages of a CATR conception, form early low level electromagnetic analysis towards the assessment of an operative facility, stages for each one of which nowadays bottleneck phenomena exist and seriously compromise the antenna measurement practices at millimeter wavelengths.

Functional and expression analysis of the metal-inducible dmeRF system from Rhizobium legumionosarum bv. viciae

A gene encoding a homolog to the cation diffusion facilitator protein DmeF from Cupriavidus metallidurans has been identified in the genome of Rhizobium leguminosarum UPM791. The R. leguminosarum dmeF gene is located downstream of an open reading frame (designated dmeR) encoding a protein homologous to the nickel- and cobalt-responsive transcriptional regulator RcnR from Escherichia coli. Analysis of gene expression showed that the R. leguminosarum dmeRF genes are organized as a transcriptional unit whose expression is strongly induced by nickel and cobalt ions, likely by alleviating the repressor activity of DmeR on dmeRF transcription. An R. leguminosarum dmeRF mutant strain displayed increased sensitivity to Co(II) and Ni(II), whereas no alterations of its resistance to Cd(II), Cu(II), or Zn(II) were observed. A decrease of symbiotic performance was observed when pea plants inoculated with an R. leguminosarum dmeRF deletion mutant strain were grown in the presence of high concentrations of nickel and cobalt. The same mutant induced significantly lower activity levels of NiFe hydrogenase in microaerobic cultures. These results indicate that the R. leguminosarum DmeRF system is a metal-responsive efflux mechanism acting as a key element for metal homeostasis in R. leguminosarum under free-living and symbiotic conditions. The presence of similar dmeRF gene clusters in other Rhizobiaceae suggests that the dmeRF system is a conserved mechanism for metal tolerance in legume endosymbiotic bacteria.

Multiscale modeling of a small punch test on nanostructured CP titanium

Small punch (SP) test techniques are typically used to study the mechanical properties of materials or components from miniature size specimens. This kind of test was originally developed to assess ductility loss in steel caused by irradiation or thermal treatment, particularly when the amount of metal was limited, but it soon proved to be a powerful method to estimate several properties.

Material, espacio y color en Mies van der Rohe. Café Samt & Seide: Hacia una Propuesta Estructural

La aparición de varias fotografías del Café Samt & Seide no publicadas hasta 2008 en las que se observaba la luz natural de la exposición; los planos a escala de la nave donde se realizó la exposición textil; y los croquis inéditos de la instalación de la seda localizados durante el transcurso de la Tesis Doctoral por el doctorando en el plano de la Sala de Cristal, han sido las principales aportaciones de la búsqueda documental que ha tenido por objeto el conocimiento espacial e interpretación gráfica del proyecto expositivo realizada durante el transcurso de la Tesis Doctoral para poder profundizar en el alcance de la propuesta protoarquitectónica y, a través de ella, en la obra y pensamiento de Mies van der Rohe. Material, espacio y color son elementos propuestos como capítulos que estructuran la disertación y que son empleados por Mies van der Rohe como factores de una nueva expresión espacial en la exposiciones como ensayos identificados con su idea de arquitectura. En el Café Samt & Seide, Mies van der Rohe y Lilly Reich proponen una sensibilidad en el empleo del material y color trasladada al espacio mediante una atmósfera rítmica y en movimiento de superficies abstraídas e iluminadas. La estructura visual de opuestos nace del doble material textil de la exposición desplegándose en un orden espacial y constructivo de elementos independientes iniciado en los apartamentos de la Colonia Weissenhof y Sala de Cristal de Stuttgart 1926-1927, y que será trasladado desde los espacios experimentales de 1927 a las series de mármoles y cristales del Pabellón Alemán 1928-1929. La síntesis intelectual (arte-ciencia-filosofía) guía el proceso de formalización y la técnica en una intención que será trasladada a su arquitectura en el empleo de la tecnología. La creatividad y repercusión de las vanguardias en la instalación muestra la voluntad integradora de la exposición y arquitectura como arte total. Los aspectos interpretativos de las artes plásticas, visuales y musicales se integran como criterios y sensibilidades aplicadas a las estructuras yuxtapuestas material, espacial y de color. Modernidad y tradición tectónica convergen en este espacio construido cuyas superficies cubren un armazón metálico oculto. La construcción mínima textil será incorporada como idea de forma en la futura construcción del pilar metálico, la pared flotante de sus viviendas y pabellones abiertos a la naturaleza, y la gran fachada tecnológica del espacio público de sus agrupaciones en la ciudad. El espacio total del Café Samt & Seide dentro de la gran nave de Berlín anticipa las exposiciones artísticas e industriales realizadas junto a Lilly Reich en el interior de las espaciosas salas de estructura metálica como instalaciones conceptuales de gravedad y luz antecedentes de los pabellones de grandes dimensiones y espacio universal. Arquitectura, construcción y lugar son integrados en la instalación por el principio estructural como propuesta de una idea de arquitectura que es desarrollada en las exposiciones. Oscilador y bastidor son construcciones escaladas dentro de la gran nave iluminada, expresando el conjunto un orden de partes que reflejan un todo integrado en la naturaleza y lo universal. Las múltiples relaciones espaciales, constructivas y conceptuales de la exposición con su arquitectura desvelan al Café Samt & Seide como un exponente y antecedente de su obra e idea a la que definió como una propuesta estructural. La estructura, entendida como un conjunto de valores culturales y medios técnicos, es el concepto con el que Mies van der Rohe identifica la síntesis intelectualtecnológica de su tiempo, constituyendo la finalidad de su expresión material, espacial y de color. ABSTRACT The unpublished pictures of the Café Samt & Seide appeared in 2008 in which the natural light in the exhibition can be seen; the scaled plan of the nave where the textile exhibition was held; and the unpublished sketches of the silk exhibition located by the doctoral candidate while preparing his dissertation have been the main input of the data search aiming at a better understanding of the space and a graphic interpretation of the exhibition project made by the doctoral candidate during the dissertation as a basic requirement to deepen in the scope of this protoarchitectural proposal and, though it, into Mies van der Rohe’s work and thinking. Material, space and colour are the elements put forward as the chapters structuring this dissertation and were used by Mies van der Rohe as factors of a new spatial expression in expositions as tests identified with his idea of architecture. In Café Samt & Seide, Mies van der Rohe and Lilly Reich present material and colour sensitivity transferred to space though a rhythmic and moving atmosphere made up by abstracted and lit surfaces. Such a visual grammar and oppositions unfolds into a space and constructive order of independent elements originated with the apartments of the Weissenhof Colony and Glass Room in Stuttgart 1926-1927, and which were transferred these test spaces 1927 to the series of marble and glass in the German Pavilion 1928-1929. The intellectual and formal will (art-science-philosophy) guides the technical expression, which is transferred to architecture through technology. The creativity and impact of avant-gardes in the installation reflects exhibition and architecture’s will to integrate as a Total Art. The interpretative aspects of plastic, visual and musical arts are part of a sensitivity applied to the overlapped structures of material, space and colour. Tectonic modernity and tradition converge in this space built with surfaces covering a hidden metal framework. The minimal textile construction is integrated as a shape idea in his subsequent construction of the metal pillar, floating wall in his housing and pavilions open to nature, and the great technological façade of the public space of his urban clusters. The total space of the exhibition inside the great nave in Berlin anticipates the artistic and industrial exhibitions done together with Lilly Reich inside the spacious Halls built with exposed metal structures as conceptual installation of gravity and light prior to the big-dimensioned pavilions and universal space. Architecture, construction and place are integrated by the structural principle. Oscillator and framework are scaled constructions integrated inside the great, lit nave, and the whole conveys order of its parts reflecting a whole integrated in nature and the universal. The many conceptual, space and constructive link of the textile exhibition to his European and American architecture add a greater knowledge of the time when Mies van der Rohe stated he gained a “new awareness” 1926, revealing Café Samt & Seide as a valuable example and the experimental precursor of his work and idea defined by himself as a “structural proposal”. The structure, understood as a set of cultural and material values expressed by architecture, is the notion used by Mies van der Rohe to identify the intellectual-technological synthesis as the idea of a time and which is the goal of its material, space and colour expression.

Discrete linear stability and sensitivity analysis of fluid flows

Este trabajo presenta un método discreto para el cálculo de estabilidad hidrodinámica y análisis de sensibilidad a perturbaciones externas para ecuaciones diferenciales y en particular para las ecuaciones de Navier-Stokes compressible. Se utiliza una aproximación con variable compleja para obtener una precisión analítica en la evaluación de la matriz Jacobiana. Además, mapas de sensibilidad para la sensibilidad a las modificaciones del flujo de base y a una fuerza constante permiten identificar las regiones del campo fluido donde una modificacin (ej. fuerza puntual) tiene un efecto estabilizador del flujo. Se presentan cuatro casos de prueba: (1) un caso analítico para comprobar la derivación discreta, (2) una cavidad cerrada a bajo Reynolds para mostrar la mayor precisión en el cálculo de los valores propios con la aproximación de paso complejo, (3) flujo 2D en un cilindro circular para validar la metodología, y (4) flujo en un cavidad abierta, presentado para validar el método en casos de inestabilidades convectivamente inestables. Los tres últimos casos mencionados (2-4) se resolvieron con las ecuaciones de Navier-Stokes compresibles, utilizando un método Discontinuous Galerkin Spectral Element Method. Se obtuvo una buena concordancia para el caso de validación (3), cuando se comparó el nuevo método con resultados de la literatura. Además, este trabajo muestra que para el cálculo de los modos propios directos y adjuntos, así como para los mapas de sensibilidad, el uso de variables complejas es de suprema importancia para obtener una predicción precisa. El método descrito es aplicado al análisis para la estabilización de la estela generada por un disco actuador, que representa un modelo sencillo para hélices, rotores de helicópteros o turbinas eólicas. Se explora la primera bifurcación del flujo para un disco actuador, y se sugiere que está asociada a una inestabilidad de tipo Kelvin-Helmholtz, cuya estabilidad se controla con en el número de Reynolds y en la resistencia del disco actuador (o fuerza resistente). En primer lugar, se verifica que la disminución de la resistencia del disco tiene un efecto estabilizador parecido a una disminución del Reynolds. En segundo lugar, el análisis hidrodinmico discreto identifica dos regiones para la colocación de una fuerza puntual que controle las inestabilidades, una cerca del disco y otra en una zona aguas abajo. En tercer lugar, se muestra que la inclusión de un forzamiento localizado cerca del actuador produce una estabilización más eficiente que al forzar aguas abajo. El análisis de los campos de flujo controlados confirma que modificando el gradiente de velocidad cerca del actuador es más eficiente para estabilizar la estela. Estos resultados podrían proporcionar nuevas directrices para la estabilización de la estela de turbinas de viento o de marea cuando estén instaladas en un parque eólico y minimizar las interacciones no estacionarias entre turbinas. ABSTRACT A discrete framework for computing the global stability and sensitivity analysis to external perturbations for any set of partial differential equations is presented. In particular, a complex-step approximation is used to achieve near analytical accuracy for the evaluation of the Jacobian matrix. Sensitivity maps for the sensitivity to base flow modifications and to a steady force are computed to identify regions of the flow field where an input could have a stabilising effect. Four test cases are presented: (1) an analytical test case to prove the theory of the discrete framework, (2) a lid-driven cavity at low Reynolds case to show the improved accuracy in the calculation of the eigenvalues when using the complex-step approximation, (3) the 2D flow past a circular cylinder at just below the critical Reynolds number is used to validate the methodology, and finally, (4) the flow past an open cavity is presented to give an example of the discrete method applied to a convectively unstable case. The latter three (2–4) of the aforementioned cases were solved with the 2D compressible Navier–Stokes equations using a Discontinuous Galerkin Spectral Element Method. Good agreement was obtained for the validation test case, (3), with appropriate results in the literature. Furthermore, it is shown that for the calculation of the direct and adjoint eigenmodes and their sensitivity maps to external perturbations, the use of complex variables is paramount for obtaining an accurate prediction. An analysis for stabilising the wake past an actuator disc, which represents a simple model for propellers, helicopter rotors or wind turbines is also presented. We explore the first flow bifurcation for an actuator disc and it suggests that it is associated to a Kelvin- Helmholtz type instability whose stability relies on the Reynolds number and the flow resistance applied through the disc (or actuator forcing). First, we report that decreasing the disc resistance has a similar stabilising effect to an decrease in the Reynolds number. Second, a discrete sensitivity analysis identifies two regions for suitable placement of flow control forcing, one close to the disc and one far downstream where the instability originates. Third, we show that adding a localised forcing close to the actuator provides more stabilisation that forcing far downstream. The analysis of the controlled flow fields, confirms that modifying the velocity gradient close to the actuator is more efficient to stabilise the wake than controlling the sheared flow far downstream. An interesting application of these results is to provide guidelines for stabilising the wake of wind or tidal turbines when placed in an energy farm to minimise unsteady interactions.