Visual grading of large cross section structural timber of Pinus sylvestris L. according to UNE 56544:2007 standard

Large cross section structural timber have been used in many structures over long periods of time and still make up an important part of the market due to its mechanical properties. Furthermore, it is frequent its employment in new construction site. It involves the need for a visual grading standard for timber used in construction according to the quality assessment. The material has to satisfy the requirements according to the currently regulations. UNE 56544 is the Spanish visual grading standard for coniferous structural timber. The 2007 version defined a new visual grade in the standard for large section termed Structural Large Timber (MEG). This research checks the new visual grading and consists of 116 structural size specimens of sawn coniferous timber of Scotch pine (Pinus sylvestris L.) from Segovia, Spain. The pieces had a cross section of 150 by 200 mm. They were visually graded according to UNE 56544:2007. Also, mechanical properties have been obtained according to standard EN 408. The results show very low output with an excessive percentage of rejected pieces (33%). The main reasons for the rejection of pieces are fissures and twist

The Economic Value of Residential Land in Historical Areas: An Application of the Residual Method to the Secondary Market

Land value bears significant weight in house prices in historical town centers. An essential aim for regulating the mortgage market, particularly in the financial and property crisis that countries such as Spain are undergoing, is to have at hand objective procedures for its valuation, whatever the conditions (location, construction, planning). Of all the factors contributing to house price make-up, the land is the only one whose value does not depend on acquisition cost, but rather on the location-time binomial. That is to say, the specific circumstances at that point and at the exact moment of valuation. For this reason, the most commonly applied procedure for land valuation in town centers is the use of the residual method: once the selling price of new housing in a district is known, the other necessary costs and expenses of development are deducted, including those of building and the developer’s profit. The value left is that of the land. To apply these procedures it is vital to have figures such as building costs, technical fees, tax costs, etc. But, above all, it is essential to obtain the selling price of the new housing. This is not always feasible, on account of the lack of newbuild development in this location. This shortage of information occurs in historical town cities, where urban renewal is slight due to the heritage-protection policies, and where, nevertheless there is substantial activity in the secondary market. In these circumstances, as an alternative for land valuation in consolidated urban areas, we have the adaptation of the residual method to the particular characteristics of the secondary market. To these ends, there is the proposal for the appreciation of the dwelling which follows, in a backwards direction, the application of traditional depreciation methods proposed by the various valuation manuals and guidelines. The reliability of the results obtained is analyzed by contrasting it with published figures for newly-built properties, according to different rules applied in administrative appraisals in Spain and the incidence of an eventual correction due to conservation state.

Definición de un nuevo modelo de negocio sostenible y aplicable a la nueva realidad de negocios y social para la convergencia de operadores de telecomunicación e Internet

La presente tesis analiza la integración del sector de las telecomunicaciones con los de TI y medios que conforman el actual hiper-sector de las TIC, para abordar una propuesta de valor que se plantea a dos niveles. Se expone de un lado, la iniciativa WIMS 2.0, que aborda los aspectos tecnológicos y estratégicos de la convergencia telco e Internet para, posteriormente, definir un nuevo modelo de negocio, que adaptado al nuevo sector integrado y siguiendo paradigmas inéditos como los que plantea la innovación abierta, permita generar nuevos flujos de ingresos en áreas no habituales para los operadores de telecomunicaciones. A lo largo del capítulo 2, el lector encontrará la contextualización del entorno de las comunicaciones de banda ancha desde tres vertientes: los aspectos tecnológicos, los económicos y el mercado actual, todo ello enfocado en una dimensión nacional, europea y mundial. Se establece de esta manera las bases para el desarrollo de los siguientes capítulos al demostrar cómo la penetración de la banda ancha ha potenciado el desarrollo de un nuevo sistema de valor en el sector integrado de las TIC, alrededor del cual surgen propuestas de modelos de negocio originales que se catalogan en una taxonomía propia. En el tercer capítulo se detalla la propuesta de valor de la iniciativa WIMS 2.0, fundada y liderada por el autor de esta tesis. WIMS 2.0, como iniciativa abierta, se dirige a la comunidad como una propuesta de un nuevo ecosistema y como un modelo de referencia integrado sobre el que desplegar servicios convergentes. Adicionalmente, sobre el planteamiento teórico definido se aporta el enfoque práctico que supone el despliegue del modelo de referencia dentro de la arquitectura de un operador como Telefónica. El capítulo 4 muestra el modelo de negocio Innovación 2.0, basado en la innovación abierta con el objetivo de capturar nuevos flujos de ingresos incrementando el portfolio de servicios innovadores gracias a las ideas frescas y brillantes de start-ups. Innovación 2.0 lejos de quedarse en una mera propuesta teórica, muestra sus bondades en el éxito práctico en el mercado que ha validado las hipótesis planteadas. El último capítulo plantea las líneas futuras de investigación tanto en el ámbito de la iniciativa WIMS 2.0 como en el modelo de Innovación 2.0, algunas de las cuales se están comenzando a abordar. 3 Abstract This thesis examines the integration of telecommunications sector with IT and media that make up the current hyper-ICT sector, to address a value proposition that arises at two levels. On one side, WIMS 2.0 initiative, which addresses the technological and strategic aspects of the telco and Internet convergence to later define a new business model, adapted to the new integrated sector and following original paradigms such as those posed by open innovation, which generates new revenue streams in areas not typical for telecom operators. Throughout Chapter 2, the reader will find the contextualization of the broadband communications environment from three aspects: technological, economic and the current market all focused on a national, European and world scale. Thus it establishes the basis for the development of the following chapters by demonstrating how the penetration of broadband has led to the development of a new value system in the integrated sector of the ICT, around which arise proposals of originals business models, which are categorized in a own taxonomy. The third chapter outlines the value proposition of the WIMS 2.0 initiative, founded and led by the author of this thesis. WIMS 2.0, as open initiative, presents to the community a proposal for a new ecosystem and an integrated reference model on which to deploy converged services. Additionally, above the theoretical approach defined, WIMS 2.0 provides the practical approach is provided which is the deployment of the reference model into the architecture of an operator such as Telefónica. Chapter 4 shows the Innovation 2.0 business model, based on open innovation with the goal of capturing new revenue streams by increasing the portfolio of innovative services thanks to the fresh and brilliant ideas from start-ups. Innovation 2.0, far from being a mere theoretical proposition, shows its benefits in the successful deployment in the market, which has validated the hypotheses. The last chapter sets out the future research at both the WIMS 2.0 initiative and Innovation 2.0 model, some of which are beginning to be addressed.

Health and safety in the construction : subject pending to be included in the curriculum of architecture in Spain

The art of construction is a risky activity that directly affects the life and physical integrity of persons. Since the approval of Law 31/1995, of November 8, Prevention of Occupational Risks was the first legislation that established the current basis in all sectors and then transposed into Spanish law Directive 92/57/CEE called Royal Decree 1627/1997 of October 24, on minimum safety and health dispositions in construction works, measures have been proposed to develop a mixed body of scientific literature composed of researchers and professionals in the field of occupational safety and health, but even today there is still no clear and firm proposal, showing a lack of awareness in the occupational risk prevention and, therefore, a consolidation of the culture of prevention in society. Therefore, the technicians, who make up the building process, can incur in very high responsibilities, such as: Author of the project, Coordinator of Safety and Health during the preparation of the project and during the execution of works, Site Management: Site Manager. This involves the immediate creation of a general training in prevention for all architects starting when still studying, as well as specific training, appropriate and complementary to all the architects that will be devoted to the specialty of occupational safety and health in construction works. That is, first, we must make the responsible bodies aware of the urgent need to integrate risk prevention in the curricula of architecture and later in the continuing education of the profession. It is necessary that our teaching must conform to the laws on safety and health, due to the fact that the law recognizes our academic degrees and professional qualifications to perform functions in that area

Identification of logically related heap regions

This paper introduces a novel technique for identifying logically related sections of the heap such as recursive data structures, objects that are part of the same multi-component structure, and related groups of objects stored in the same collection/array. When combined withthe lifetime properties of these structures, this information can be used to drive a range of program optimizations including pool allocation, object co-location, static deallocation, and region-based garbage collection. The technique outlined in this paper also improves the efficiency of the static analysis by providing a normal form for the abstract models (speeding the convergence of the static analysis). We focus on two techniques for grouping parts of the heap. The first is a technique for precisely identifying recursive data structures in object-oriented programs based on the types declared in the program. The second technique is a novel method for grouping objects that make up the same composite structure and that allows us to partition the objects stored in a collection/array into groups based on a similarity relation. We provide a parametric component in the similarity relation in order to support specific analysis applications (such as a numeric analysis which would need to partition the objects based on numeric properties of the fields). Using the Barnes-Hut benchmark from the JOlden suite we show how these grouping methods can be used to identify various types of logical structures allowing the application of many region-based program optimizations.

Advances in the modeling, characterization and reliability of concentrator multijunction solar cells

Los sistemas de concentración fotovoltaica (CPV) parecen ser una de las vías más prometedoras para generar electricidad a gran escala a precios competitivos. La investigación actual se centra en aumentar la eficiencia y la concentración de los sistemas para abaratar costes. Al mismo tiempo se investiga sobre la fiabilidad de los diferentes componentes que integran un sistema de concentración, ya que para que los sistemas de concentración sean competitivos es necesario que tengan una fiabilidad al menos similar a los sistemas basados en células de silicio. En la presente tesis doctoral se ha llevado a cabo el estudio de aspectos avanzados de células solares multi-unión diseñadas para trabajar a concentraciones ultra-altas. Para ello, se ha desarrollado un modelo circuital tridimensional distribuido con el que simular el comportamiento de las células solares triple-unión bajo distintas condiciones de funcionamiento, así mismo se ha realizado una caracterización avanzada de este tipo de células para comprender mejor su modo de operación y así poder contribuir a mejorar su eficiencia. Finalmente, se han llevado a cabo ensayos de vida acelerados en células multiunión comerciales para conocer la fiabilidad de este tipo de células solares. Para la simulación de células solares triple-unión se ha desarrollado en la presente tesis doctoral un modelo circuital tridimensinal distribuido el cuál integra una descripción completa de la unión túnel. De este modo, con el modelo desarrollado, hemos podido simular perfiles de luz sobre la célula solar que hacen que la densidad de corriente fotogenerada sea mayor a la densidad de corriente pico de la unión túnel. El modelo desarrollado también contempla la distribución lateral de corriente en las capas semiconductoras que componen y rodean la unión túnel. Por tanto, se ha podido simular y analizar el efecto que tiene sobre el funcionamiento de la célula solar que los concentradores ópticos produzcan perfiles de luz desuniformes, tanto en nivel de irradiancia como en el contenido espectral de la luz (aberración cromática). Con el objetivo de determinar cuáles son los mecanismos de recombinación que están limitando el funcionamiento de cada subcélula que integra una triple-unión, y así intentar reducirlos, se ha llevado a cabo la caracterización eléctrica de células solares monouni ón idénticas a las subcelulas de una triple-unión. También se ha determinado la curva corriente-tensión en oscuridad de las subcélulas de GaInP y GaAs de una célula dobleunión mediante la utilización de un teorema de reciprocidad electro-óptico. Finalmente, se ha analizado el impacto de los diferentes mecanismos de recombinación en el funcionamiento de la célula solar triple-unión en concentración. Por último, para determinar la fiabilidad de este tipo de células, se ha llevado a cabo un ensayo de vida acelerada en temperatura en células solares triple-unión comerciales. En la presente tesis doctoral se describe el diseño del ensayo, el progreso del mismo y los datos obtenidos tras el análisis de los resultados preliminares. Abstract Concentrator photovoltaic systems (CPV) seem to be one of the most promising ways to generate electricity at competitive prices. Nowadays, the research is focused on increasing the efficiency and the concentration of the systems in order to reduce costs. At the same time, another important area of research is the study of the reliability of the different components which make up a CPV system. In fact, in order for a CPV to be cost-effective, it should have a warranty at least similar to that of the systems based on Si solar cells. In the present thesis, we will study in depth the behavior of multijunction solar cells under ultra-high concentration. With this purpose in mind, a three-dimensional circuital distributed model which is able to simulate the behavior of triple-junction solar cells under different working conditions has been developed. Also, an advanced characterization of these solar cells has been carried out in order to better understand their behavior and thus contribute to improving efficiency. Finally, accelerated life tests have been carried out on commercial lattice-matched triple-junction solar cells in order to determine their reliability. In order to simulate triple-junction solar cells, a 3D circuital distributed model which integrates a full description of the tunnel junction has been developed. We have analyzed the behavior of the multijunction solar cell under light profiles which cause the current density photo-generated in the solar cell to be higher than the tunnel junction’s peak current density. The advanced model developed also takes into account the lateral current spreading through the semiconductor layers which constitute and surround the tunnel junction. Therefore, the effects of non-uniform light profiles, in both irradiance and the spectral content produced by the concentrators on the solar cell, have been simulated and analyzed. In order to determine which recombination mechanisms are limiting the behavior of each subcell in a triple-junction stack, and to try to reduce them when possible, an electrical characterization of single-junction solar cells that resemble the subcells in a triplejunction stack has been carried out. Also, the dark I-V curves of the GaInP and GaAs subcells in a dual-junction solar cell have been determined by using an electro-optical reciprocity theorem. Finally, the impact of the different recombination mechanisms on the behavior of the triple-junction solar cell under concentration has been analyzed. In order to determine the reliability of these solar cells, a temperature accelerated life test has been carried out on commercial triple-junction solar cells. In the present thesis, the design and the evolution of the test, as well as the data obtained from the analysis of the preliminary results, are presented.

El injerto en pepino corto tipo español (Cucumis sativus L.) recomencaciones para su empleo en la zona central española

El injerto en hortalizas es uno de los temas de más actualidad en el panorama hortícola, no solo español, sino occidental, y recalcamos occidental, pues en muchos países que no corresponden a ese ámbito, sobre todo asiáticos: Japón, Corea, China, Filipinas, etc., esta es una técnica que cuenta con una gran difusión desde hace décadas, siendo, por ejemplo en Japón, la mayoría de sus cultivos de cucurbitáceas y solanáceas realizados con planta injertada. A finales de los noventa quedó claro que el empleo de bromuro de metilo tenía una fecha de caducidad y que las zonas que tenían una fuerte dependencia de este desinfectante de suelo debían de buscar alternativas a un plazo lo más corto posible, con un punto añadido sobre etapas anteriores, debían ser alternativas lo más respetuosas posible con el medio ambiente y que no incrementaran, de forma importante, los costes de producción. En la zona centro y concretamente en los invernaderos de la Comunidad de Madrid y zonas cercanas de Toledo y Guadalajara el pepino era y es el cultivo predominante, los horticultores empleaban el bromuro de metilo de forma sistemática para desinfectar sus suelos y la desaparición de este producto les planteaba una gran incertidumbre, lo que llevó a que desde diferentes instancias se buscaran diferentes alternativas. Tras analizar las posibilidades que se podían implementar y conocido el buen resultado que había dado el injerto en sandía en Almería, se decidió acometer los trabajos que conforman esta Tesis Doctoral, planteando en la zona, diferentes ensayos con la idea de conocer, si el injerto en pepino, con los cultivares empleados habitualmente, podía ser una alternativa real para los horticultores, tanto de Madrid, como los de las zonas cercanas de Toledo y Guadalajara. Se pretendía conocer sobre todo las repercusiones agronómicas y si esta técnica podría emplearse en solitario o era necesario complementarla con otras alternativas: desinfectantes químicos, solarización, biofumigación e incluso desinfección con vapor de agua. Los ensayos fueron realizados de forma secuencial entre el año 1999 y el 2011, comprobándose en primer lugar que el empleo de portainjertos híbridos de calabaza era posible con los cultivares de pepino corto tipo español, mayoritariamente empleados en los últimos años del siglo XX y primeros del XXI, fundamentalmente: Serena. Tras los primeros ensayos, Shintoza parecía el portainjerto híbrido de calabaza (Cucurbita maxima x C. moschata) con mejores perspectivas de empleo, pues presentaba la ventaja adicional de ser bien conocido por los semilleros que producen planta injertada al ser, en esos momentos, el portainjerto más empleado en sandía, lo que garantizaba por su lado, su empleo en pepino, y que los horticultores pudiesen disponer de planta injertada. Más adelante los trabajos se encaminaron hacia la determinación de la densidad y tipo de poda más adecuado para la planta injertada, realizándose múltiples ensayos en esta dirección, que culminaron con la conclusión de que el extravigor que los portainjertos conferían a las plantas permitía conducir estas a dos o más brazos (se suelen emplear dos, por mejor adaptación a los trabajos de manejo de la planta por parte de los agricultores), con lo que se podría disminuir la densidad de planta y por tanto ahorrar en este capítulo, cosa que preocupaba y preocupa a los agricultores. Se llegó a determinar que es posible reducir la densidad de plantación en alrededor de un 25%, estando la densidad de brazos más adecuada entre 3 y 3.5 br•m-2. Tras las primeras decisiones tomadas sobre el portainjerto y la densidad más adecuada, se continuó con el estudio de adaptación de estas propuestas a los nuevos cultivares que las empresas de semillas iban proponiendo y los agricultores adoptando. Estas acciones se complementaron con la introducción de nuevos portainjertos susceptibles de sustituir a Shintoza o rotar con él para cambiar de sistema radicular, lo que es conveniente cuando se emplean, como es el caso, portainjertos que no son resistentes a nematodos, principalmente de la especie Meloidogyne incognita, el mayor problema en la zona, debido al suelo. Cultivares como Trópico, en un primer momento, y Urano y Motril más recientemente, se adaptaron muy bien a esta técnica. Entre los portainjertos que mostraron buena adaptación a la técnica de injerto y suficientemente buena compatibilidad con la mayoría de los cultivares ensayados destacan: RS-841, Strongtosa y Camel. Azman también mostró un comportamiento relevante, pero este portainjerto no podrá ser empleado, al ser recientemente retirado del mercado por la empresa que lo obtuvo y comercializó Aunque no era el objetivo principal de esta Tesis Doctoral, se ha comprobado que puede ser interesante combinar el empleo del injerto con otras técnicas alternativas al bromuro de metilo para superar los problemas debidos a enfermedades del suelo o nematodos, pero debe seguirse trabajando pues este es un tema en continua evolución, tanto si se trata de desinfectantes, a la mayoría de los cuales les está siendo retirado el permiso para su comercialización, como de otros métodos como la biofumigación o el empleo de vapor de agua. Queda muy claro que el injerto puede considerarse entre los métodos respetuosos con el medio ambiente, si no el que más, en lo que alternativas al bromuro de metilo se refiere. También en otro momento, se comprobó que con plantas injertadas es posible reducir el aporte de nutrientes, sobre todo nitrógeno, lo que además de un ahorro supone una mejora más desde el punto de vista medioambiental. En definitiva, queda demostrado que es factible el empleo del injerto en pepino corto tipo español, que las selecciones de los híbridos entre Cucurbita maxima y C. moschata que habitualmente se están empleando en sandía son también de aplicación en estos pepinos y que su empleo puede llevarnos a producciones suficientemente remuneradoras, alargándose en muchos casos el ciclo y no modificando, de forma apreciable, la calidad. Queda también demostrado que aunque los portainjertos no sean resistentes a nematodos, su extravigor les hace desarrollarse, desde el punto de vista productivo, suficientemente, llegando por tanto, a “convivir” con ese problema. Al no ser resistentes los portainjertos, y permanecer e incluso agravarse el problema de nematodos es conveniente poder contar con diferentes portainjertos que nos permitan rotar entre ellos y utilizar diferentes sistemas radiculares que harán menos fácil el parasitismo de los nematodos, como recomiendan los nematólogos que se haga. ABSTRACT Vegetable grafting is one of the most current practices in horticulture, not only in Spain, but also in other Western and Asian countries, such as Japan, South Korea, China, the Philippines, etc. This is a decades-old, widespread technique: In fact, most cucurbit and solanaceous crops in Japan and Korea are grafted. At the end of the 1990s, it was clear that methyl bromide had an expiry date. Consequently, the areas strongly dependant on this soil disinfectant had to look for alternatives as quickly as possible. Besides, these had to be as environmentally friendly as possible and should not increase production costs significantly. The cucumber has been and still is the most important crop in greenhouses of the Comunidad de Madrid and in areas near Toledo and Guadalajara. Cucumber growers used methyl bromide systematically to disinfect the soil. The banning of this chemical product brought about uncertainty, which encouraged the search for different alternatives. After analyzing the different possibilities and taking into account the good results of watermelon grafting in Almería, it was decided to carry out the works that make up this doctoral thesis. Different trials were made in order to know if the cultivars used in cucumber grafting might be a real alternative for farmers, not only in Madrid, but also in the areas near Toledo and Guadalajara. The main aim was to assess the agronomic repercussions and whether that technique could be used alone, or if other complementary alternatives, such as chemical disinfectants, solarisation, biofumigation, or even steam disinfection, were necessary. Trials were carried out sequentially from 1999 to 2011. It was observed that the use of pumpkin hybrid rootstocks could be applied to cultivars of Spanish short cucumbers, mainly grown in the late 20th and early 21st centuries eg Serena. After the early trials, Shintoza (Cucurbita maxima x C. moschata), a pumpkin hybrid rootstock, seemed to be the best option, as it had the additional advantage of being well known by nurseries growing grafting plants. Bearing this in mind, Shintoza was then the hybrid rootstock to be used in cucumbers and consequently growers could have grafted plants at their disposal. Later on, research was focused on density and the most adequate type of pruning, by carrying out several trials. These experiments showed that, the extra vigour the rootstocks gave to the plants, allowed them to have two or three stems, (normally nurserymen use two, as it is easier for them to manage the plants). These findings would lead to the lessening the density of the plant and thus reduce costs, something which worried and still worries farmers. It was stated that it would be possible to reduce the density of the plants by about 25%, the optimum density of the stems ranging from 3 to 3.5 stem-m-2. Once decisions were taken both on the rootstock and the appropriate density, we went on to study how to apply these proposals to the new cultivars which the seed companies were proposing and the farmers were applying. These measures were complemented with the introduction of new rootstocks capable of replacing Shintoza, or rotating with it in order to change the root system. This is particularly necessary when rootstocks, non-resistant to nematodes, mainly of the species Meloidogyne incognita, are used. This is the main problem due to the soil of that area. Cultivars such as Trópico, at first, and Urano and Motril, more recently, adapted quite well to this technique. Among the rootstocks which adapted well to grafting and which were compatible with most tested cultivars, were, in particular, RS-841 Strongtosa and Camel. The behaviour of Azman was worth studying, but this rootstock was removed from the market by the company which had bought and commercialized it. Although not the main purpose of the research, it was observed that combining grafting with other alternatives to methyl bromide in order to overcome problems due to soil diseases or nematodes may be worthwhile. However, further research is needed, as this topic is in constant evolution, not only when we come to disinfectants, most of which are being affected by the removal of the permit for commercialization, but also when we refer to other techniques such as biofumigation or the use of steam. Results also showed that grafted plants may reduce the amount of fertilizers, particularly nitrogen, used: This means both saving money and the protection of the environment. We may conclude by saying that grafting Spanish short cucumbers is feasible, that the selections of the hybrids between Cucurbita maxima and C. moschata, habitually used in watermelon grafting, can also be applied to these cucumbers. It can also be concluded that the use of these grafting techniques may lead to profitable yields, by lengthening the growing cycle in many cases and by maintaining the quality to a large extent. Although these rootstocks are not resistant to nematodes, the results showed that their extra vigour enables them to develop in terms of production, and thus they cope with this problem. Since these rootstocks are not resistant to nematodes and the problem with these nematodes may even worsen, it is recommended that different types of rootstocks should be available to enable both the rotation and the use of different root systems, which will encourage the parasitism of nematodes.

Diseño de un modelo de riesgo integral de incendios forestales mediante técnicas multicriterio y su automatización en sistemas de información geográfica : una aplicación en la Comunidad Valenciana

Los incendios forestales son la principal causa de mortalidad de árboles en la Europa mediterránea y constituyen la amenaza más seria para los ecosistemas forestales españoles. En la Comunidad Valenciana, diariamente se despliega cerca de un centenar de vehículos de vigilancia, cuya distribución se apoya, fundamentalmente, en un índice de riesgo de incendios calculado en función de las condiciones meteorológicas. La tesis se centra en el diseño y validación de un nuevo índice de riesgo integrado de incendios, especialmente adaptado a la región mediterránea y que facilite el proceso de toma de decisiones en la distribución diaria de los medios de vigilancia contra incendios forestales. El índice adopta el enfoque de riesgo integrado introducido en la última década y que incluye dos componentes de riesgo: el peligro de ignición y la vulnerabilidad. El primero representa la probabilidad de que se inicie un fuego y el peligro potencial para que se propague, mientras que la vulnerabilidad tiene en cuenta las características del territorio y los efectos potenciales del fuego sobre el mismo. Para el cálculo del peligro potencial se han identificado indicadores relativos a los agentes naturales y humanos causantes de incendios, la ocurrencia histórica y el estado de los combustibles, extremo muy relacionado con la meteorología y las especies. En cuanto a la vulnerabilidad se han empleado indicadores representativos de los efectos potenciales del incendio (comportamiento del fuego, infraestructuras de defensa), como de las características del terreno (valor, capacidad de regeneración…). Todos estos indicadores constituyen una estructura jerárquica en la que, siguiendo las recomendaciones de la Comisión europea para índices de riesgo de incendios, se han incluido indicadores representativos del riesgo a corto plazo y a largo plazo. El cálculo del valor final del índice se ha llevado a cabo mediante la progresiva agregación de los componentes que forman cada uno de los niveles de la estructura jerárquica del índice y su integración final. Puesto que las técnicas de decisión multicriterio están especialmente orientadas a tratar con problemas basados en estructuras jerárquicas, se ha aplicado el método TOPSIS para obtener la integración final del modelo. Se ha introducido en el modelo la opinión de los expertos, mediante la ponderación de cada uno de los componentes del índice. Se ha utilizado el método AHP, para obtener las ponderaciones de cada experto y su integración en un único peso por cada indicador. Para la validación del índice se han empleado los modelos de Ecuaciones de Estimación Generalizadas, que tienen en cuenta posibles respuestas correlacionadas. Para llevarla a cabo se emplearon los datos de oficiales de incendios ocurridos durante el período 1994 al 2003, referenciados a una cuadrícula de 10x10 km empleando la ocurrencia de incendios y su superficie, como variables dependientes. Los resultados de la validación muestran un buen funcionamiento del subíndice de peligro de ocurrencia con un alto grado de correlación entre el subíndice y la ocurrencia, un buen ajuste del modelo logístico y un buen poder discriminante. Por su parte, el subíndice de vulnerabilidad no ha presentado una correlación significativa entre sus valores y la superficie de los incendios, lo que no descarta su validez, ya que algunos de sus componentes tienen un carácter subjetivo, independiente de la superficie incendiada. En general el índice presenta un buen funcionamiento para la distribución de los medios de vigilancia en función del peligro de inicio. No obstante, se identifican y discuten nuevas líneas de investigación que podrían conducir a una mejora del ajuste global del índice. En concreto se plantea la necesidad de estudiar más profundamente la aparente correlación que existe en la provincia de Valencia entre la superficie forestal que ocupa cada cuadrícula de 10 km del territorio y su riesgo de incendios y que parece que a menor superficie forestal, mayor riesgo de incendio. Otros aspectos a investigar son la sensibilidad de los pesos de cada componente o la introducción de factores relativos a los medios potenciales de extinción en el subíndice de vulnerabilidad. Summary Forest fires are the main cause of tree mortality in Mediterranean Europe and the most serious threat to the Spanisf forest. In the Spanish autonomous region of Valencia, forest administration deploys a mobile fleet of 100 surveillance vehicles in forest land whose allocation is based on meteorological index of wildlandfire risk. This thesis is focused on the design and validation of a new Integrated Wildland Fire Risk Index proposed to efficient allocation of vehicles and specially adapted to the Mediterranean conditions. Following the approaches of integrated risk developed last decade, the index includes two risk components: Wildland Fire Danger and Vulnerability. The former represents the probability a fire ignites and the potential hazard of fire propagation or spread danger, while vulnerability accounts for characteristics of the land and potential effects of fire. To calculate the Wildland Fire Danger, indicators of ignition and spread danger have been identified, including human and natural occurrence agents, fuel conditions, historical occurrence and spread rate. Regarding vulnerability se han empleado indicadores representativos de los efectos potenciales del incendio (comportamiento del fuego, infraestructurasd de defensa), como de las características del terreno (valor, capacidad de regeneración…). These indicators make up the hierarchical structure for the index, which, following the criteria of the European Commission both short and long-term indicators have been included. Integration consists of the progressive aggregation of the components that make up every level in risk the index and, after that, the integration of these levels to obtain a unique value for the index. As Munticriteria methods are oriented to deal with hierarchically structured problems and with situations in which conflicting goals prevail, TOPSIS method is used in the integration of components. Multicriteria methods were also used to incorporate expert opinion in weighting of indicators and to carry out the aggregation process into the final index. The Analytic Hierarchy Process method was used to aggregate experts' opinions on each component into a single value. Generalized Estimation Equations, which account for possible correlated responses, were used to validate the index. Historical records of daily occurrence for the period from 1994 to 2003, referred to a 10x10-km-grid cell, as well as the extent of the fires were the dependant variables. The results of validation showed good Wildland Fire Danger component performance, with high correlation degree between Danger and occurrence, a good fit of the logistic model used and a good discrimination power. The vulnerability component has not showed a significant correlation between their values and surface fires, which does not mean the index is not valid, because of the subjective character of some of its components, independent of the surface of the fires. Overall, the index could be used to optimize the preventing resources allocation. Nevertheless, new researching lines are identified and discussed to improve the overall performance of the index. More specifically the need of study the inverse relationship between the value of the wildfire Fire Danger component and the forested surface of each 10 - km cell is set out. Other points to be researched are the sensitivity of the index component´s weight and the possibility of taking into account indicators related to fire fighting resources to make up the vulnerability component.

La luz natural como generadora del espacio arquitectónico de la catedral gótica

La historia de la construcción de las catedrales góticas es la historia de la búsqueda de la luz. Esta afirmación casi metafísica, recoge una realidad asumida por todos los historiadores tanto de la arquitectura antigua como del resto de las artes. La luz en el gótico ha sido descrita bajo múltiples matices como son su carácter simbólico, cromático e incluso místico, sin embargo no existe, en el estudio del conocimiento de la luz gótica, ninguna referencia a la misma como realidad física cuantificable, cualificable y por tanto, clasificable. La presente tesis doctoral aborda el concepto de la iluminación gótica desde una perspectiva nueva. Demuestra, con un método analítico inédito, que la iluminación gótica es cuantificable y cualificable. Para ello analiza en profundidad la iluminación de una selección de 6 edificios muestra, las catedrales de Gerona, Toledo, Sevilla y León, la basílica de Santa María del Mar y la capilla de la Sainte Chapelle de París, mediante una toma de datos “in situ” de iluminación y su comparación con los datos lumínicos obtenidos por un programa de soleamiento de la simulación en tres dimensiones de los distintos proyectos originales góticos. El análisis exhaustivo de las muestras y su introducción en el método analítico descrito, permite determinar, en primer lugar, unas cualidades inéditas que identifican la luz de los espacios góticos según unos parámetros nuevos como son la intensidad, expresividad, recorrido, distorsión y color. También describe cuales son los factores determinantes, de nuevo inéditos, que modulan cada una de las cualidades y en que proporción lo hacen cada uno de ellos. Una vez establecidas las cualidades y los factores que las definen, la tesis doctoral establece los rangos en los que se mueven las distintas cualidades y que conformarán la definitiva clasificación según “tipos de cualidad lumínica”. Adicionalmente, la tesis propone un procedimiento abreviado de acercamiento a la realidad de la iluminación gótica a través de unas fórmulas matemáticas que relacionan los factores geométricos detectados y descritos en la tesis con el resultado luminoso del espacio en lo que concierne a las dos cualidades más importantes de las reflejadas, la intensidad y la expresividad. Gracias a este método y su procedimiento abreviado, la clasificación se hace extensible al resto de catedrales góticas del panorama español y europeo y abre el camino a nuevas clasificaciones de edificios históricos de distintas épocas, iniciando un apasionante camino por recorrer en la recuperación de “la luz original”. Esta clasificación y sus cualidades podrán a su vez, ser utilizadas como herramientas de conocimiento de un factor determinante a la hora de describir cualquier espacio gótico y su aportación pretende ser un nuevo condicionante a tener en cuenta en el futuro, ayudando a entender y respetar, en las posibles intervenciones a realizar sobre el patrimonio arquitectónico, aquello que fue en su inicio motor principal del proyecto arquitectónico y que hoy día no se valora suficientemente tan solo por falta de conocimiento: su luz. The history of the construction of the Gothic cathedrals is the history of the search for light. This almost etaphysical statement reflects a reality accepted by all historians both of ancient architecture and other arts. Light in the Gothic period has been described under multiple approaches such as its symbolic, chromatic and even mystical character. However, in the study of the Gothic light, no references exist to it as a physical quantifiable and qualifiable reality and therefore, classifiable. This dissertation deals with the concept of Gothic light from a new perspective. With a new analytical method, it shows that Gothic lighting is quantifiable and can be classified regarding quality. To this end, a selection of 6 buildings light samples are analyzed; the cathedrals of Gerona, Toledo, Seville and León, the basilica of Santa María of the Sea and the Sainte Chapelle in Paris. "In situ" lighting data is collected and it is compared with lighting data obtained by a program of sunlight of the 3D simulation of various Gothic original projects. The comprehensive analysis of the samples and the data introduced in the analytical method described, allows determining, first, important qualities that identify the light of Gothic spaces according to new parameters such as intensity, expressiveness, trajectory, distortion and color. It also describes the determinant factors, which modulate each of the qualities and in what proportion they do it. Once the qualities and factors that define them have been established, in this doctoral dissertation the ranges regarding different qualities are set, which will make up the final classification according to "types of light quality". In addition, this work proposes an abbreviated procedure approach to the reality of the Gothic lighting through some mathematical formulae, relating the geometric factors identified and described in the study with the bright result of space regarding the two most important qualities of the light,intensity and expressiveness. Thanks to this method and to the abbreviated procedure, the classification can be applied to other Spanish and European Gothic cathedrals and opens up the way to new classifications of historic buildings from different eras, starting an exciting road ahead in the recovery of the "original light". This classification and its qualities may in turn be used as tools to know a determinant factor when describing any Gothic space. Its contribution is intended to be a new conditioning factor to keep in mind in the future, helping to understand and respect, in possible interventions on the architectural heritage, what was the main engine to start the architectural project and which today is not valued enough due to the lack knowledge: the light.

Selective ablation with UV lasers of a-Si:H thin film solar cells in direct scribing configuration

Monolithical series connection of silicon thin-film solar cells modules performed by laser scribing plays a very important role in the entire production of these devices. In the current laser process interconnection the two last steps are developed for a configuration of modules where the glass is essential as transparent substrate. In addition, the change of wavelength in the employed laser sources is sometimes enforced due to the nature of the different materials of the multilayer structure which make up the device. The aim of this work is to characterize the laser patterning involved in the monolithic interconnection process in a different configurations of processing than the usually performed with visible laser sources. To carry out this study, we use nanosecond and picosecond laser sources working at 355nm of wavelength in order to achieve the selective ablation of the material from the film side. To assess this selective removal of material has been used EDX (energy dispersive using X-ray) analysis

Therapeutic metaphors in engineering: how to cure a building structure

Cognitive linguistics have conscientiously pointed out the pervasiveness of conceptual mappings, particularly as conceptual blending and integration, that underlie language and that are unconsciously used in everyday speech (Fauconnier 1997, Fauconnier & Turner 2002; Rohrer 2007; Grady, Oakley & Coulson 1999). Moreover, as a further development of this work, there is a growing interest in research devoted to the conceptual mappings that make up specialized technical disciplines. Lakoff & Núñez 2000, for example, have produced a major breakthrough on the understanding of concepts in mathematics, through conceptual metaphor and as a result not of purely abstract concepts but rather of embodiment. On the engineering and architecture front, analyses on the use of metaphor, blending and categorization in English and Spanish have likewise appeared in recent times (Úbeda 2001, Roldán 1999, Caballero 2003a, 2003b, Roldán & Ubeda 2006, Roldán & Protasenia 2007). The present paper seeks to show a number of significant conceptual mappings underlying the language of architecture and civil engineering that seem to shape the way engineers and architects communicate. In order to work with a significant segment of linguistic expressions in this field, a corpus taken from a widely used technical Spanish engineering journal article was collected and analysed. The examination of the data obtained indicates that many tokens make a direct reference to therapeutic conceptual mappings, highlighting medical domains such as diagnosing,treating and curing. Hence, the paper illustrates how this notion is instantiated by the corresponding bodily conceptual integration. In addition, we wish to underline the function of visual metaphors in the world of modern architecture by evoking parts of human or animal anatomy, and how this is visibly noticeable in contemporary buildings and public works structures.

Application of backend database contents and structure to the design of spoken dialog services

Current development platforms for designing spoken dialog services feature different kinds of strategies to help designers build, test, and deploy their applications. In general, these platforms are made up of several assistants that handle the different design stages (e.g. definition of the dialog flow, prompt and grammar definition, database connection, or to debug and test the running of the application). In spite of all the advances in this area, in general the process of designing spoken-based dialog services is a time consuming task that needs to be accelerated. In this paper we describe a complete development platform that reduces the design time by using different types of acceleration strategies based on using information from the data model structure and database contents, as well as cumulative information obtained throughout the successive steps in the design. Thanks to these accelerations, the interaction with the platform is simplified and the design is reduced, in most cases, to simple confirmations to the “proposals” that the platform automatically provides at each stage. Different kinds of proposals are available to complete the application flow such as the possibility of selecting which information slots should be requested to the user together, predefined templates for common dialogs, the most probable actions that make up each state defined in the flow, different solutions to solve specific speech-modality problems such as the presentation of the lists of retrieved results after querying the backend database. The platform also includes accelerations for creating speech grammars and prompts, and the SQL queries for accessing the database at runtime. Finally, we will describe the setup and results obtained in a simultaneous summative, subjective and objective evaluations with different designers used to test the usability of the proposed accelerations as well as their contribution to reducing the design time and interaction.

Crack origin and detection in thin cristallyne solar cells in a production line

In order to reduce cost and make up for the rising price of silicon, silicon wafers are sliced thinner and wider,eading to weaker wafers and increased breakage rates during fabrication process. In this work we have analysed different cracks origins and their effect on wafer’s mechanical strength. To enhance wafer’s strength some etching methods have been tested. Also, we have analysed wafers from different points of an entire standard production process. Mechanical strength of the wafers has been obtained via the four line bending test and detection of cracks has been tested with Resonance Ultrasonic Vibration (RUV) system, developed by the University of South Florida.

An automatic critical care urine meter

Nowadays patients admitted to critical care units have most of their physiological parameters measured automatically by sophisticated commercial monitoring devices. More often than not, these devices supervise whether the values of the parameters they measure lie within a pre-established range, and issue warning of deviations from this range by triggering alarms. The automation of measuring and supervising tasks not only discharges the healthcare staff of a considerable workload but also avoids human errors in these repetitive and monotonous tasks. Arguably, the most relevant physiological parameter that is still measured and supervised manually by critical care unit staff is urine output (UO). In this paper we present a patent-pending device that provides continuous and accurate measurements of patient’s UO. The device uses capacitive sensors to take continuous measurements of the height of the column of liquid accumulated in two chambers that make up a plastic container. The first chamber, where the urine inputs, has a small volume. Once it has been filled it overflows into a second bigger chamber. The first chamber provides accurate UO measures of patients whose UO has to be closely supervised, while the second one avoids the need for frequent interventions by the nursing staff to empty the container

Análisis acústico del estudio de grabación Ritmo & Compás

En la actualidad, el éxito de una grabación musical depende, en gran medida, de la acústica que caracteriza la sala de control y la sala de grabación de un estudio donde se haya realizado ésta, así como del equipo utilizado. La acústica de un estudio de grabación viene determinada por la absorción, reverberación y aislamiento acústico de ese recinto. Estos son los factores que le dan la personalidad las salas. En este proyecto, se analiza el comportamiento acústico de las dos salas que componen estudio de grabación de „Ritmo & Compas‟, una sala de control y una sala de grabación, mediante la realización de medidas in situ. Se comparan los resultados con los valores aconsejados y se observa si ambas salas cumplen las condiciones óptimas que corresponden a cada una de éstas. En el caso de haber deficiencias acústicas, se proporcionan soluciones de acondicionamiento acústico en las salas, que se validan mediante simulación. Además, se realiza el estudio sobre el aislamiento a ruido aéreo entre los dos recintos colindantes que componen el estudio de grabación. ABSTRACT. Nowadays, the success of a musical recording depends, to a large extent, on the good acoustics that characterizes the recording studio where it has been made, as well as the equipment used. The acoustics of a recording studio is determined by absorption, reverberation and sound insulation of the enclosure. These are the factors that give personality to the site. This project aims to study the acoustic behavior of the two rooms that make the recording studio 'Ritmo & Compas', a control room and a recording room, by performing in situ measurements. Results will be compared with the recommended values and examined if both rooms meet the optimal conditions that correspond to each of these. In the case of having acoustic deficiencies will be provided acoustic solutions in the rooms, which are validated by simulation. In addition, there will be the study of airborne sound insulation between the two neighboring enclosures that make up the recording studio.