Auto-localization algorithm for local positioning systems

This paper studies the problem of determining the position of beacon nodes in Local Positioning Systems (LPSs), for which there are no inter-beacon distance measurements available and neither the mobile node nor any of the stationary nodes have positioning or odometry information. The common solution is implemented using a mobile node capable of measuring its distance to the stationary beacon nodes within a sensing radius. Many authors have implemented heuristic methods based on optimization algorithms to solve the problem. However, such methods require a good initial estimation of the node positions in order to find the correct solution. In this paper we present a new method to calculate the inter-beacon distances, and hence the beacons positions, based in the linearization of the trilateration equations into a closed-form solution which does not require any approximate initial estimation. The simulations and field evaluations show a good estimation of the beacon node positions.

El territorio en el sistema agroalimentario: el tramo medio del valle del Duero 1900-2015

La lectura histórica del territorio en relación con el sistema agroalimentario aporta elementos claves para reconstruir el sistema territorial, aprovechando la oportunidad que ofrece un renovado interés por la alimentación local y sostenible. El análisis histórico transdisciplinar incorpora variables espaciales, económicas, energéticas, urbanísticas, agronómicas y nutricionales y se centra en el tramo medio del valle del Duero (Castilla y León, España). Se trata de un territorio tradicionalmente agrícola, donde un producto de la tierra -el vino- es motor de innovación y ha transformado paisajes y estructuras. Aún así, se enfrenta a un desarrollo desigual e ilustra las contradicciones del mundo rural en un contexto alimentario globalizado. El análisis de la región desde 1900 permite constatar la relación entre la organización del territorio, el sistema agroalimentario, y cada una de las etapas nutricionales: a) la superación de la desnutrición está asociada a una agricultura familiar y al territorio de proximidad, que persiste en la zona hasta 1950; b) el modelo de consumo de masas y sobrealimentación, se basa en una agricultura industrializada y un territorio polarizado ligado al desarrollismo, que se extiende hasta 1985; c) finalmente, el modelo de consumo segmentado se apoya en una agricultura terciarizada y un territorio de enclaves en un contexto de globalización, que dura hasta nuestros días. En la última fase aparecen nuevos modelos alternativos de reconstrucción territorial con sistemas emergentes que reconectan campo y ciudad, consumo y producción desde sistemas de alimentación sostenible. Conviven dos tendencias: una hacia la jerarquización y el productivismo tecnificado y otra hacia la multifuncionalidad y la recampesinización que se reapropia de las innovaciones técnicas. La adaptación a las condiciones locales y aprovechar los recursos endógenos son elementos clave de sostenibilidad ambiental y social. Incorporar la alimentación en la planificación urbana y territorial desde una perspectiva agroecológica reduciría la insostenibilidad del sistema alimentario. Las propuestas de ordenación han de tener en cuenta la tipología de municipios, sus interrelaciones, las características agrológicas y productivas, la relación del muncipcon los núcleos de referencia y con las poblaciones que concentran las necesidades de alimentación. Se debe considerar asimismo la disponiblidad de infraestructuras, de equipamientos y de capital humano y relacional para fijar cadena de valor local. La ordenación urbanística cuenta ya con mecanismos como la clasificación del suelo, la regulación de usos y el diseño de redes de equipamientos que inciden sobre la autonomía de los sistema de alimentación locales y permiten fomentar la biodiversidad y las variedades locales. Son mecanismos insuficientemente aprovechados. Una adecuada utilización de los instrumentos de ordenación existentes, junto con el desarrollo de otros nuevos mejorarían de forma significativa la resiliencia de los sistemas agroalimentarios locales. ABSTRACT The historical review of the relationship between territory and agrifood system provides key lessons to help rebuild the territorial fabric, seizing the opportunity offered by a renewed interest in local and sustainable food. The historical transdisciplinary analysis spans spatial, economic, energy, agronomic and nutritional variables, focuses on the middle reaches of the Douro valley (Castilla y Leon, Spain). This a traditionally agricultural region, which has managed to turn a land product – the wine– into an engine of innovation which has transformed landscapes and structures. Even so, it faces the challenges of uneven development and illustrates the contradictions of the rural world in a globalized context. After the analysis of the evolution of the region since 1900, it can be concluded that the territory has been organized over time according to three models of food system that are in turn linked to different nutritional stages: a) the nutritional stage of overcoming malnutrition is related to family agriculture and a territory of proximity, which persists in the studied area until 1950; b) the model of mass consumption and overeating, was built on an industrialized agriculture and a polarized territory with unhindered development, which runs until 1985; c) and, finally, the model of consumer segmentation associated with terciarized agriculture and enclave territories in the context of globalization, which lasts until present time. During this last stage new alternative models of small-scale territorial reconstruction appear, linked to emerging systems that, based on sustainable food systems, reconnect city and countryside, consumption and production. Actually two trends coexist: one towards hierarchisation and tech-based productivism, and another one towards multifunctionality and peasantization that reappropriates technical innovations. The adaptation to local conditions taking advantage of local resources is a key element of environmental and social sustainability. Integrating food into urban and regional planning from an agroecological perspective would help reduce the current unsustainability of the food system. Planning proposals for municipalities need to consider their typology, agrological characteristics, productive capacity, links to other municipalities, proximity to reference nodes and population concentrations with food demands that need to be met. Availability of infrastructure, facilities, as well as human and relational capital to establish and reinforce local value chains is another aspect to consider in planning proposals. Spatial and urban planning are already equipped with mechanisms, such as land classification and the design of facilities’ networks, that affect the autonomy and stability of local food systems and can support biodiversity and adoption of local varieties. We are, however, missing opportunities. An adequate use of existing planning tools and the development of new ones could significantly improve the resilience of local agrifood systems.

PDR with a foot-mounted IMU and ramp detection

The localization of persons in indoor environments is nowadays an open problem. There are partial solutions based on the deployment of a network of sensors (Local Positioning Systems or LPS). Other solutions only require the installation of an inertial sensor on the person’s body (Pedestrian Dead-Reckoning or PDR). PDR solutions integrate the signals coming from an Inertial Measurement Unit (IMU), which usually contains 3 accelerometers and 3 gyroscopes. The main problem of PDR is the accumulation of positioning errors due to the drift caused by the noise in the sensors. This paper presents a PDR solution that incorporates a drift correction method based on detecting the access ramps usually found in buildings. The ramp correction method is implemented over a PDR framework that uses an Inertial Navigation algorithm (INS) and an IMU attached to the person’s foot. Unlike other approaches that use external sensors to correct the drift error, we only use one IMU on the foot. To detect a ramp, the slope of the terrain on which the user is walking, and the change in height sensed when moving forward, are estimated from the IMU. After detection, the ramp is checked for association with one of the existing in a database. For each associated ramp, a position correction is fed into the Kalman Filter in order to refine the INS-PDR solution. Drift-free localization is achieved with positioning errors below 2 meters for 1,000-meter-long routes in a building with a few ramps.

Error estimation for the linearized auto-localization algorithm

The Linearized Auto-Localization (LAL) algorithm estimates the position of beacon nodes in Local Positioning Systems (LPSs), using only the distance measurements to a mobile node whose position is also unknown. The LAL algorithm calculates the inter-beacon distances, used for the estimation of the beacons’ positions, from the linearized trilateration equations. In this paper we propose a method to estimate the propagation of the errors of the inter-beacon distances obtained with the LAL algorithm, based on a first order Taylor approximation of the equations. Since the method depends on such approximation, a confidence parameter τ is defined to measure the reliability of the estimated error. Field evaluations showed that by applying this information to an improved weighted-based auto-localization algorithm (WLAL), the standard deviation of the inter-beacon distances can be improved by more than 30% on average with respect to the original LAL method.

Improving photovoltaics grid integration through short time forecasting and self-consumption

The uncertainty associated to the forecast of photovoltaic generation is a major drawback for the widespread introduction of this technology into electricity grids. This uncertainty is a challenge in the design and operation of electrical systems that include photovoltaic generation. Demand-Side Management (DSM) techniques are widely used to modify energy consumption. If local photovoltaic generation is available, DSM techniques can use generation forecast to schedule the local consumption. On the other hand, local storage systems can be used to separate electricity availability from instantaneous generation; therefore, the effects of forecast error in the electrical system are reduced. The effects of uncertainty associated to the forecast of photovoltaic generation in a residential electrical system equipped with DSM techniques and a local storage system are analyzed in this paper. The study has been performed in a solar house that is able to displace a residential user?s load pattern, manage local storage and estimate forecasts of electricity generation. A series of real experiments and simulations have carried out on the house. The results of this experiments show that the use of Demand Side Management (DSM) and local storage reduces to 2% the uncertainty on the energy exchanged with the grid. In the case that the photovoltaic system would operate as a pure electricity generator feeding all generated electricity into grid, the uncertainty would raise to around 40%.

Efecto de la fertilización orgánica y mineral en las propiedades del suelo, la emisión de los principales gases de efecto invernadero y en las diferentes fases fenológicas del cultivo de café (Coffea arabica L.)

El cultivo de café es de gran importancia a nivel mundial (ICO, 2011), y en el Ecuador ha sido uno de los cultivos más importantes en la generación de divisas (COFENAC, 2011). Sin embargo en los sistemas productivos de este país se puede apreciar el uso inapropiado de fertilizantes, lo que conlleva a una pérdida de nutrientes, por lo que es importante estudiar las dosis adecuadas para la fertilización tanto mineral como orgánica. El objetivo del trabajo fue evaluar el efecto de la fertilización mineral y orgánica en diferentes dosis en un monocultivo de café en la provincia de Loja, sobre las propiedades del suelo, la emisión de los principales gases que provocan el efecto invernadero y la fenología y productividad del cultivo. En la provincia de Loja (Ecuador) se seleccionó un área de 2.520 m2 en la que se establecieron 21 parcelas de café arábigo (Coffea arabica L.) var. caturra y se aplicó tres tratamientos con tres repeticiones de fertilización mineral y tres orgánicos con dosis: bajas minerales (MIN 1= 157 Kg NPK ha-1 año-1 para el primer año y 425 Kg NPK ha-1 año-1 para el segundo año), medias minerales (MIN 2= 325 Kg NPK ha-1 año-1 para el primer año y 650 Kg NPK ha-1 año-1 en el segundo año) y altas minerales (MIN 3= 487 y 875 Kg NPK ha-1 año-1 para el primer y segundo año respectivamente), bajas orgánicas (ORG 1= 147 Kg NPK ha-1 año-1 en el primer año y 388 Kg NPK ha-1 año-1 en el año dos), medias orgánicas (ORG 2= 265 Kg NPK ha-1 año-1 para el primer año y 541 Kg NPK ha-1 año-1 en el segundo año), altas orgánicas (ORG 3= 368 Kg NPK ha-1 año-1 para el primer año y 727 Kg NPK ha-1 año-1 en el segundo año) y fertilización cero (TES = sin fertilización). Se usó urea, roca fosfórica y muriato de potasio en la fertilización mineral y humus (Bioabor) en la orgánica, más un tratamiento testigo, cada tratamiento tuvo tres repeticiones. El tiempo de evaluación de los fertilizantes aplicados fue de dos años consecutivos, la fertilización se la realizó dos veces por año y en base a análisis del suelo y demandas nutricionales del cultivo. para determinar las características del suelo se realizó muestreos de suelos en cada parcela a una profundidad de 20 cm de estas muestras los parámetro iniciales determinados fueron: color (Munsell), textura (método del hidrómetro), pH (relación 1:2,5 suelo-agua), Materia orgánica (Walkey y Black), Nitrógeno (Micro Kjendahl), Fósforo (Bray y Kurtz), Potasio (Olsen), estos procesos se repitieron cada seis meses para poder evaluar los cambios de que se producen debido a la fertilización mineral y orgánica en el cultivo. Las emisiones de gases efecto invernadero desde el suelo al ambiente se determinaron por el método de cámara cerrada (Rondón, 2000) y la concentración por cromatografía de gases. Las mediciones fisiológicas (altura de planta, ancho de copa, grosor de tallo y producción) se las evaluó cada dos meses, a excepción de la producción que fue anual al término de cada cosecha. Además se realizó el análisis económico de la productividad del cultivo. El análisis estadístico de datos se lo realizó con el programa SPSS v. 17.0. Las medias fueron comprobadas mediante ANOVAS de un factor con test de Tukey (P < 0,05). El beneficio económico se estimó en términos de ingresos y gastos totales que se presentaron en el ensayo. Los resultados obtenidos al término del ensayo indican que los tratamientos MIN 2 y MIN 3 produjeron cambios más significativos en comparación con los otros tratamientos establecidos en la mejora de fertilidad del suelo, el pH ha sido menos afectado en la acidificación en comparación con los tratamientos orgánicos que se han acidificado mayormente; la materia orgánica (MO) tuvo incrementos considerablemente bueno en estos dos tratamientos, sin embargo fueron superados por los tratamientos de fertilización orgánica; el nitrógeno total (Nt )y el potasio (K) también presentaron mejores valores al termino del ensayo y el fósforo (P) mostro incrementos buenos aunque un poco menores que los de los tratamientos ORG 2 y ORG 3. En lo que respecta a las emisiones de gases efecto invernadero, los flujos acumulados de óxido nitroso (N2O) en los dos años han aumentado en todos los tratamientos en comparación con el tratamiento Testigo, pero de manera considerable y con mayores flujos en el tratamiento MIN 3 y MIN 2 que se podrían considerarse los de mayor contaminación por N2O al ambiente lo que se le atribuye a las dosis de fertilización mineral aplicadas en el periodo de investigación, los tratamiento MIN 1 y todos los tratamientos orgánicos muestran menores emisiones al ambiente. Las emisiones de metano (CH4) no muestran mayores diferencias de emisiones entre tratamientos, siendo los mayores emisores los tratamientos ORG 3 y ORG 2 posiblemente debido al abono orgánico y añadido al suelo; para las emisiones de dióxido de carbono (CO2) de manera similar al CH4 el tratamiento ORG 3 fue el que presento mayores emisiones, los flujos de CO2 al ambiente de los otros tratamientos fueron menores y no presentaron diferencias significativas entre ellos. La variables fisiológicas en todos los casos apoyaron al desarrollo de las plantas de café, esto al ser comparadas con el tratamiento Testigo, sin embargo las que alcanzaron las mayores altitudes, anchos de copas y diámetro de tallo fueron las plantas del tratamiento MIN 3, seguido del MIN 3, no mostrando significancia entre ellos, y para los tratamientos orgánicos el que presento muy buenos resultados en estas variables ha sido el ORG 3, el cual no presento diferencias significativas con el MIN 2, lo cual comprueba que la fertilización mineral es más efectiva en este caso frente a la orgánica. Para el primer año de producción el tratamiento mineral con fertilización MIN 3 es el que obtuvo mayor producción no presentando diferencia estadística con el tratamiento con el MIN 2, no obstante fueron significativamente mayores que los otros tratamientos. Vale indicar que también el tratamiento MIN 1 y el tratamiento ORG 3 han presentado una producción considerable de café no mostrando diferencias estadísticas entre ellos. Para el segundo año la producción el cultivo mostró mayores rendimientos que el primer año de evaluación en todos los tratamientos, esto debido a la fisiología propia del cultivo y por otra parte se atribuye a la adición de fertilizantes que se ha realizado durante todo el ensayo; de manera similar al anterior los tratamientos MIN 3 y MIN 2 obtuvieron mejores rendimientos, no enseñando diferencias estadísticas significativas entre ellos, no obstante el tratamiento mineral dosis MEDIA no presentó significancia estadística con el ORG 3. El benéfico económico ha resultado mayor en el tratamiento MIN 3 y MIN 2, aunque el tratamiento MIN 2, es el que obtiene la mejor relación costo-beneficio; los tratamientos ORG 2 y ORG 3 y Testigo has producido beneficios negativos para el productor. En cuanto a la parte ambiental se considera que los mejores tratamientos en cuanto ha cuidado ambiental serían los tratamientos MIN 1 y ORG 1, sin embargo a nivel de producción y rentabilidad para el productor baja. ABSTRACT Coffee growing has great importance worldwide (ICO, 2011), and in Ecuador, it has been one of the most important crops to generate income (COFENAC, 2011). However, in the productive systems of this country, the inappropriate use of fertilizers has been observed which produces loss of nutrients, thus it is important to study suitable doses for mineral and organic fertilizing. The purpose of the study was to evaluate the effect of mineral and organic fertilizing at different doses in a coffee monoculture in the province of Loja on soil characteristics, emission of the main gasses that produce the greenhouse effect and the phenology and productivity of crops. In the province of Loja (Ecuador) an area of 2.520 m2 was chosen, where 21 plots of Arabica coffee (Coffea arabica L.), the caturra variety were cultivated and three treatments with three repetitions each one for mineral and organic fertilization were used with doses that ranged from: mineral low (MIN 1= 157 Kg NPK ha-1 año-1 for the first year y 425 Kg NPK ha-1 año-1 for the second year), mineral medium (MIN 2= 325 Kg NPK ha-1 año-1 for the first year y 650 Kg NPK ha-1 año-1 I the second year) y mineral high (MIN 3= 487 y 875 Kg NPK ha-1 año-1 for the first and second year respectively), organic low (ORG 1= 147 Kg NPK ha-1 año-1 in the first year y 388 Kg NPK ha-1 año-1 in the second year), organics medium (ORG 2= 265 Kg NPK ha-1 año-1 for the first year y 541 Kg NPK ha-1 año-1 in the second year), organics high (ORG 3= 368 Kg NPK ha-1 año-1 for the first year and 727 Kg NPK ha-1 año-1 in the second year) y fertilization zero (TES = no fertilization).; urea, phosphoric rock and muriate of potash were used in the mineral fertilization and humus (Bioabor) in the organic, plus a blank treatment. Time to evaluate the applied fertilizers was for two consecutive years, fertilization was done twice per year based on soil analysis and nutritional requirements of the crops. In order to determine the characteristics of the soil, samples of soil in each plot with a depth of 20 cm were done; from these samples, the determined initial parameters were: color (Munsell), texture (hydrometer method), pH (soil-water 1:2,5 relation), organic matter (Walkey y Black), nitrogen (Micro Kjendahl), phosphorus (Bray y Kurtz), potassium (Olsen); these processes were repeated each six months in order to evaluate the changes that are produced due to mineral and organic fertilization in the crops. The emissions of greenhouse gasses from the soil to the atmosphere were determined by using enclosure method (Rondón, 2000) and the concentration, by using gas chromatography during the whole testing. The physiological measures (plant height, width of the top of the tree, thickness of the stem and production) were evaluated each two months, except for production which was annual at the end of each harvest. Moreover, the economic analysis of the productivity of the crops was done. The statistical analysis of the data was done using SPSS v. 17.0. The means were proved by ANOVAS with a factor of a Tukey test (P < 0,05). The economic benefit was estimated in terms of incomes and total expenses which were presented in the essay. The results obtained at the end of the essay show that the MIN 2 and MIN 3 treatments produced more meaningful changes in comparison with the other treatments used to improve soil fertility; pH was less affected in the acidification compared with the organic treatments which were greatly acidified; organic matter (MO) had increased considerably in these two treatments; however, they were surpassed by the organic treatments of fertilization; total nitrogen (Nt) and potassium (K) also presented better results at the end of the essay and phosphorus (P) showed good increasing figures although a little lower compared with ORG 2 and ORG 3 treatments. Regarding the emission of the greenhouse gasses, the fluxes accumulated from nitrous oxide (N2O) in two years increased in all the treatments in comparison with the blank treatment, but in a greater form and with higher fluxes in the MIN 3 and MIN 2 treatments which can be considered as the ones with greater contamination of N2O in the atmosphere, this can be due to the applied mineral doses to fertilize during the process; MIN 1 treatments and all the organic ones showed lower emission to the atmosphere. Methane emissions (CH4) did not show major differences in emissions in the treatments, being the greater emissions the ORG 3 and ORG 2 treatments; this is possibly due to the organic compost added to the soil; regarding carbon dioxide (CO2) emissions, in a similar way to CH4, the ORG 3 treatment was the one that presented greater emissions, the CO2 emissions to the atmosphere in the other treatments were lower and did not present meaningful differences among them. The physiological variables in all the cases helped coffee crops grow, this was observed when compared with the blank treatment; however, plants that reached the greatest height, width of top and diameter of stem were the plants of the MIN 3 treatment, followed by MIN 3, which did not show much significance among them, and for the organic treatments, the one that presented great results in these variables was ORG 3, which did not show meaningful differences compared with MIN 2, which proves that mineral fertilization is more effective in this case compared with the organic. In the first year of production, the mineral treatment with MIN 3 fertilization obtained greater production and thus did not show statistical difference with MIN 2 treatment, although the other treatments were greater. It is worth mentioning that MIN 1 treatment and ORG 3 treatment presented a meaningful production of coffee, not showing statistical differences among them. For the second year, the production of the crops showed greater profits than in the first year of evaluation in all the treatments, this was due to the physiological properties of the crops and on the other hand, it might be due to the addition of fertilizers during the whole essay; in a similar way, MIN 3 and MIN 2 performed better, not showing greater statistical differences among them, although the mineral treatment MEDIUM doses did not show statistical difference compared with ORG 3. The economic benefit was greater in the MIN 3 and MIN 2 treatments, although MIN 2 treatment is the one that shows the best cost-benefit ratios; ORG 2 and ORG 3 treatments and the blank produced negative benefits for the producer. Regarding the environment, the best treatments to care for the atmosphere are considered to be MIN 1 and ORG 1 treatments; however, regarding production volume and profitability they were low for the producer.

Definición de un Modelo Edafogeomorfológico para la Identificación de Necesidades de Manejo y Recuperación de Suelos a Nivel Local. Caso Cuenca Cañada La Gorda, Machiques Colón, Estado Zulia, Venezuela.

El objetivo de este trabajo es generar un modelo Edafogeomorfológico útil en la identificación de necesidades de manejo de suelos, se realizó un estudio en el área de la cuenca Cañada La Gorda Machiques-Colón, estado Zulia, Venezuela, caracterizada por un clima tropical de condición subhúmeda, con duración del periodo de crecimiento (DPC) de 230 días, régimen de humedad Ustic y de temperatura Isohipertémico. Se empleó el enfoque de la ecuación factorial de formación de suelos para el análisis y descripción biofísica de los factores a lo largo de una carena. El relieve caracterizado a partir de fotografías aéreas, imágenes de satélites y de chequeos sistemático mediante transectos en el sentido del flujo del escurrimiento; la vegetación a través del uso de la tierra, la cobertura vegetal, la identificación de las especies dominantes a partir de sus nombres vernáculos y la definición de indicadores de vegetales (Iv). Los suelos fueron descritos y clasificados según la Taxonomía de suelos y valorados mediante el modelo paramétricode Riquier et al. (1970) para determinar el índice de productividad (Ip). Se caracterizaron dos paisajes gemorfológicos: Colinar (C) y Valle (V), seis posiciones geomorfológicas entre ambos paisajes definidas por la sucesión de relieves en el sentido de la pendiente: Tope de colina-loma (TC), mesa conservada (MC), vertientes de mesa alta (VA), media (VM), baja (VB) y valle intracolinar (VI); e igual número de perfiles de suelos representativos, los cuales mostraron edafogénesis muy avanzada con Ip inferiores a 8% en todas las posiciones, exceptuando la VB, con una productividad de 13%. El uso de la tierra es a base de pastoreo semi-intensivo de plantas forrajeras introducidas. Las formaciones vegetales predominante fueron los matorrales y arbustales dispersos, acompañados con restos de una selva tropófila fuertemente afectada por la extracción forestal y la conversión en áreas de pastoreo. Se identificaron 8 Iv, asociados fuertemente con condiciones de físicas e hidrológicas del suelo. El alto impacto de las actividades humanas sobre el suelo y vegetación, expresado a través de los procesos de erosión activa, la ausencia de áreas boscosas y la baja productividad de los sistemas de ganadería reportada para la zona, señalan la necesidad de reorientación del uso actual de la tierra, para lo cual se plantean alternativas como la incorporación de bosques protectores y sistemas agrosilvopastoriles In order to generate an Edaphogeomorphological model to be used for the identification of management requirements of soils, a study was carried out in the area of the Cañada La Gorda watershed, Machiques Colon, Zulia State with a tropical climate, subsumid conditions with a growing period of 230 days, an Ustic soil moisture and Isohypertermic regimes. The soils factorial equation approach was used for the analisis and description of the factors of soil formation throughout a soil catena. Relief was characterized through aerial photographs, satellite images and systematic checks of transects drawn in the sense of surface runoff and also taking into account geomorphological features. Vegetation cover and land use were described and vegetation components were indified by its local names to defined vegetations indicators (VI) for the local conditions. Soils were described and classified according to soil taxonomy and valued by means of a parametric model proposed by Riquier et al, (1970) for determining the productivity index (PI). Two geomorphological landscapes were defined: Hilly and Valley with six positions within the landscapes: hilltop (round or elongated), preserved tableland summit, slopes of high, medium and low tableland and valleys between hills. Representative soils of each position were studied showing a highly advanced degree of edaphogenesis with PI values below 8% in all positions except the valleys with a PI of 13%. Land use type is based on semi intensive pasturing of introduced forage species, with a vegetation of brushwood and scattered shrubs, with some trees relicts of woods affected by timber extraction and turn to grassland Eight VI were identified, highly associated to local physical and hidrological soil conditions. The enormous impact of human activity on soils and vegetation as shown by active erosion processes and absence of wooded areas and the low productivity of livestock systems reported for the area, indicates the necessity of a reorientation of the present land use introducing alternatives like the incorporation of protective woods and agrosilvopastoral management systems.

New methods for the estimation of Takagi-Sugeno model based extended Kalman filter and its applications to optimal control for nonlinear systems

This paper describes new approaches to improve the local and global approximation (matching) and modeling capability of Takagi–Sugeno (T-S) fuzzy model. The main aim is obtaining high function approximation accuracy and fast convergence. The main problem encountered is that T-S identification method cannot be applied when the membership functions are overlapped by pairs. This restricts the application of the T-S method because this type of membership function has been widely used during the last 2 decades in the stability, controller design of fuzzy systems and is popular in industrial control applications. The approach developed here can be considered as a generalized version of T-S identification method with optimized performance in approximating nonlinear functions. We propose a noniterative method through weighting of parameters approach and an iterative algorithm by applying the extended Kalman filter, based on the same idea of parameters’ weighting. We show that the Kalman filter is an effective tool in the identification of T-S fuzzy model. A fuzzy controller based linear quadratic regulator is proposed in order to show the effectiveness of the estimation method developed here in control applications. An illustrative example of an inverted pendulum is chosen to evaluate the robustness and remarkable performance of the proposed method locally and globally in comparison with the original T-S model. Simulation results indicate the potential, simplicity, and generality of the algorithm. An illustrative example is chosen to evaluate the robustness. In this paper, we prove that these algorithms converge very fast, thereby making them very practical to use.

Effects of feeding strategy, fiber source of the diet, and crude protein content on productive performance of broiler breeder hens

A 12-wk experiment was conducted to investigate the effect of feeding program, dietary fiber, and CP content of the diet on productive performance of Ross broiler breeder hens (41 wk of age). There were 12 treatments arranged factorially with 2 levels of CP (14.5 vs. 17.4%), 3 fiber sources (0 vs. 3% inulin vs. 3% cellulose), and 2 levels of feed intake (160 vs. 208 g/d) that corresponded to restricted (R) or ad libitum (AL) feeding systems. The experimental diets contained 2,800 kcal ME with either 0.65 (14.5% CP) or 0.78% Lys (17.4% CP).

An optimization method for conceptual design in engineering systems based on high order singular value decomposition

Se presenta un nuevo método de diseño conceptual en Ingeniería Aeronáutica basado el uso de modelos reducidos, también llamados modelos sustitutos (‘surrogates’). Los ingredientes de la función objetivo se calculan para cada indiviudo mediante la utilización de modelos sustitutos asociados a las distintas disciplinas técnicas que se construyen mediante definiciones de descomposición en valores singulares de alto orden (HOSVD) e interpolaciones unidimensionales. Estos modelos sustitutos se obtienen a partir de un número limitado de cálculos CFD. Los modelos sustitutos pueden combinarse, bien con un método de optimización global de tipo algoritmo genético, o con un método local de tipo gradiente. El método resultate es flexible a la par que mucho más eficiente, computacionalmente hablando, que los modelos convencionales basados en el cálculo directo de la función objetivo, especialmente si aparecen un gran número de parámetros de diseño y/o de modelado. El método se ilustra considerando una versión simplificada del diseño conceptual de un avión. Abstract An optimization method for conceptual design in Aeronautics is presented that is based on the use of surrogate models. The various ingredients in the target function are calculated for each individual using surrogates of the associated technical disciplines that are constructed via high order singular value decomposition and one dimensional interpolation. These surrogates result from a limited number of CFD calculated snapshots. The surrogates are combined with an optimization method, which can be either a global optimization method such as a genetic algorithm or a local optimization method, such as a gradient-like method. The resulting method is both flexible and much more computationally efficient than the conventional method based on direct calculation of the target function, especially if a large number of free design parameters and/or tunablemodeling parameters are present. The method is illustrated considering a simplified version of the conceptual design of an aircraft empennage.

Soil fragmentation study applying different tillage systems

Runoff generation depends on rainfall, infiltration, interception, and surface depressional storage. Surface depressional storage depends on surface microtopography, usually quantified trough soil surface roughness (SSR). SSR is subject to spatial and temporal changes that create a high variability. In an agricultural environment, tillage operations produce abrupt changes in roughness. Subsequent rainfall gradually decreases roughness. Beside it, local variation in soil properties and hydrology cause its SSR to vary spatially at different scales. The methods commonly used to measure it involve collecting point elevations in regular grids using laser profilers or scanners, digital close range stereo-photogrammetry and terrestrial laser scanning or LIDAR systems. In this case, a laser-scanning instrument was used to obtain representative digital elevation models (DEMs) at a grid resolution of 7.2x7.2mm that cover an area of 0.9x0.9m. The DEMs were obtained from two study sites with different soils. The first study site was an experimental field on which five conventional tillage methods were applied. The second study site was a large olive orchard with trees planted at 7.5x5.0m and bare soils between rows. Here, three tillage treatments were applied. In this work we have evaluated the spatial variability of SSR at several scales studying differences in height calculated from points separated by incremental distances h were raised to power values q (from 0 to 4 in steps of 0.1). The q = 2 data were studied as a semivariogram model. The logarithm of average differences plotted vs. log h were characterized by their slope, ?(q). Structure functions [?(q) vs. q] were fitted showing that data had nonlinear structure functions typical of multiscale phenomena. Comparisson of the two types of soil in their respective structure functions are shown.

Testing of fluorescent DC lamps for Solar Home Systems

With the advent of the Universal Technical Standard for Solar Home Systems, procedures to test the compliance of SHS fluorescent lamps with the standard have been developed. Definition of the laboratory testing procedures is a necessary step in any lamp quality assurance procedure. Particular attention has been paid to test simplicity and to affordability, in order to facilitate local application of the testing procedures, for example by the organisations which carry out electrification programmes. The set of test procedures has been applied to a representative collection of 42 lamps from many different countries, directly acquired in the current photovoltaic rural electrification market. Tests apply to: lamp resistance under normal operating conditions; lamp reliability under extreme conditions; under abnormal conditions; and lamp luminosity. Results are discussed and some recommendations for updating the relevant standard are given. The selected technical standard, together with the proposed testing procedures, form the basis of a complete quality assurance tool that can be applied locally in normal electrical laboratories. Full testing of a lamp requires less than one month, which is very reasonable on the context of quality assurance programmes

Experience with PV-diesel hybrid village power systems in southern Morocco

In October 2002, under the auspices of Spanish Cooperation, a pilot electrification project put into operation two centralised PV-diesel hybrid systems in two different Moroccan villages. These systems currently provide a full-time energy service and supply electricity to more than a hundred of families, six community buildings, street lighting and one running water system. The appearance of the electricity service is very similar to an urban one: one phase AC supply (230V/50Hz) distributed up to each dwelling using a low-voltage mini-grid, which has been designed to be fully compatible with a future arrival of the utility grid. The management of this electricity service is based on a “fee-for-service” scheme agreed between a local NGO, partner of the project, and electricity associations created in each village, which are in charge of, among other tasks, recording the daily energy production of systems and the monthly energy consumption of each house. This register of data allows a systematic evaluation of both the system performance and the energy consumption of users. Now, after four years of operation, this paper presents the experience of this pilot electrification project and draws lessons that can be useful for designing, managing and sizing this type of small village PV-hybrid system

WWW Programming using computational logic systems (and the PiLLoW/Ciao library)

We discuss from a practical point of view a number of issues involved in writing Internet and WWW applications using LP/CLP systems. We describe Pd_l_oW, a public-domain Internet and WWW programming library for LP/CLP systems which we argüe significantly simplifies the process of writing such applications. Pd_l_oW provides facilities for generating HTML structured documents, producing HTML forms, writing form handlers, accessing and parsing WWW documents, and accessing code posted at HTTP addresses. We also describe the architecture of some application classes, using a high-level model of client-server interaction, active modules. We then propose an architecture for automatic LP/CLP code downloading for local execution, using generic browsers. Finally, we also provide an overview of related work on the topic. The PiLLoW library has been developed in the context of the &- Prolog and CIAO systems, but it has been adapted to a number of popular LP/CLP systems, supporting most of its functionality.

The PiLLoW/Ciao library for INTERNET/WWW programming using computational logic systems

We discuss from a practical point of view a number of issues involved in writing Internet and WWW applications using LP/CLP systems. We describe PiLLoW, an Internet and WWW programming library for LP/CLP systems which we argüe significantly simplifies the process of writing such applications. PiLLoW provides facilities for generating HTML structured documents, producing HTML forms, writing form handlers, accessing and parsing WWW documents, and accessing code posted at HTTP addresses. We also describe the architecture of some application classes, using a high-level model of client-server interaction, active modules. Finally we describe an architecture for automatic LP/CLP code downloading for local execution, using generic browsers. The PiLLoW library has been developed in the context of the &-Prolog and CIAO systems, but it has been adapted to a number of popular LP/CLP systems, supporting most of its functionality.