Assessing the impact of adaptive accessibility on the optimal transport policy implementation by using an integrated land-use/transport model for Madrid

Accessibility is an essential concept widely used to evaluate the impact of land-use and transport strategies in transport and urban planning. Accessibility is typically evaluated by using a transport model or a land-use model independently or successively without a feedback loop, thus neglecting the interaction effects between the two systems and the induced competition effects among opportunities due to accessibility improvements. More than a mere methodological curiosity, failure to account for land- use/transport interactions and the competition effect may result in large underestimation of the policy effects. With the recent development of land-use and transport interaction (LUTI) models, there is a growing interest in using these models to adequately measure accessibility and evaluate its impact. The current study joins this research stream by embedding an accessibility measure in a LUTI model with two main aims. The first aim is to account for adaptive accessibility, namely the adjustment of the potential accessibility due to the effect of competition among opportunities (e.g., workplaces) as a result of improved accessibility. LUTI models are particularly suitable for assessing adaptive accessibility because the competition factor is a function of the number of jobs, which is related to land-use attractiveness and the number of workers which is related, among other factors, to the transport demand. The second aim is to identify the optimal implementation scenario of policy measures on the basis of the potential and adaptive accessibility and analyse the results in terms of social welfare and accessibility. The metropolitan area of Madrid is used as a case-study and two transport policy instruments, namely a cordon toll and bus frequency increase, have been chosen for the simulation study in order to present the usefulness of the approach to urban planners and policy makers. The MARS model (Metropolitan Activity Relocation Simulator) calibrated for Madrid was employed as the analysis tool. The impact of accessibility is embedded in the model through a social welfare function that includes not only costs and benefits to both road users and transport operators, but also costs and benefits for the government and society in general (external costs). An optimisation procedure is performed by the MARS model for maximizing the value of objective function in order to find the best (optimal) policy imp lementations intensity (i.e., price, frequency). Last, the two policy strategies are evaluated in terms of their accessibility. Results show that the accessibility with competition factor influences the optimal policy implementation level and also generates different results in terms of social welfare. In addition, mapping the difference between the potential and the adaptive accessibility indicators shows that the main changes occur in areas where there is a strong competition among land-use opportunities.

Assessing the accessibility impact of transport policy by a land-use and transport interaction model - The case of Madrid

Accessibility is an essential concept widely used to evaluate the impact of transport and land-use strategies in urban planning and policy making. Accessibility is typically evaluated by using separately a transport model or a land-use model. This paper embeds two accessibility indicators (i.e., potential and adaptive accessibility) in a land use and transport interaction (LUTI) model in order to assess transport policies implementation. The first aim is to define the adaptive accessibility, considering the competition factor at territorial level (e.g. workplaces and workers). The second aim is to identify the optimal implementation scenario of policy measures using potential and adaptive accessibility indicators. The analysis of the results in terms of social welfare and accessibility changes closes the paper. Two transport policy measures are applied in Madrid region: a cordon toll and increase bus frequency. They have been simulated through the MARS model (Metropolitan Activity Relocation Simulator, i.e. LUTI model). An optimisation procedure is performed by MARS for maximizing the value of the objective function in order to find the optimal policy implementation (first best). Both policy measures are evaluated in terms of accessibility. Results show that the introduction of the accessibility indicators (potential and adaptive) influence the optimal value of the toll price and bus frequency level, generating different results in terms of social welfare. Mapping the difference between potential and adaptive accessibility indicator shows that the main changes occur in areas where there is a strong competition among different land-use opportunities.

Environmental variables modeling based on remote sensing data using time series analysis: forestry and agricultural applications

En la actualidad, el seguimiento de la dinámica de los procesos medio ambientales está considerado como un punto de gran interés en el campo medioambiental. La cobertura espacio temporal de los datos de teledetección proporciona información continua con una alta frecuencia temporal, permitiendo el análisis de la evolución de los ecosistemas desde diferentes escalas espacio-temporales. Aunque el valor de la teledetección ha sido ampliamente probado, en la actualidad solo existe un número reducido de metodologías que permiten su análisis de una forma cuantitativa. En la presente tesis se propone un esquema de trabajo para explotar las series temporales de datos de teledetección, basado en la combinación del análisis estadístico de series de tiempo y la fenometría. El objetivo principal es demostrar el uso de las series temporales de datos de teledetección para analizar la dinámica de variables medio ambientales de una forma cuantitativa. Los objetivos específicos son: (1) evaluar dichas variables medio ambientales y (2) desarrollar modelos empíricos para predecir su comportamiento futuro. Estos objetivos se materializan en cuatro aplicaciones cuyos objetivos específicos son: (1) evaluar y cartografiar estados fenológicos del cultivo del algodón mediante análisis espectral y fenometría, (2) evaluar y modelizar la estacionalidad de incendios forestales en dos regiones bioclimáticas mediante modelos dinámicos, (3) predecir el riesgo de incendios forestales a nivel pixel utilizando modelos dinámicos y (4) evaluar el funcionamiento de la vegetación en base a la autocorrelación temporal y la fenometría. Los resultados de esta tesis muestran la utilidad del ajuste de funciones para modelizar los índices espectrales AS1 y AS2. Los parámetros fenológicos derivados del ajuste de funciones permiten la identificación de distintos estados fenológicos del cultivo del algodón. El análisis espectral ha demostrado, de una forma cuantitativa, la presencia de un ciclo en el índice AS2 y de dos ciclos en el AS1 así como el comportamiento unimodal y bimodal de la estacionalidad de incendios en las regiones mediterránea y templada respectivamente. Modelos autorregresivos han sido utilizados para caracterizar la dinámica de la estacionalidad de incendios y para predecir de una forma muy precisa el riesgo de incendios forestales a nivel pixel. Ha sido demostrada la utilidad de la autocorrelación temporal para definir y caracterizar el funcionamiento de la vegetación a nivel pixel. Finalmente el concepto “Optical Functional Type” ha sido definido, donde se propone que los pixeles deberían ser considerados como unidades temporales y analizados en función de su dinámica temporal. ix SUMMARY A good understanding of land surface processes is considered as a key subject in environmental sciences. The spatial-temporal coverage of remote sensing data provides continuous observations with a high temporal frequency allowing the assessment of ecosystem evolution at different temporal and spatial scales. Although the value of remote sensing time series has been firmly proved, only few time series methods have been developed for analyzing this data in a quantitative and continuous manner. In the present dissertation a working framework to exploit Remote Sensing time series is proposed based on the combination of Time Series Analysis and phenometric approach. The main goal is to demonstrate the use of remote sensing time series to analyze quantitatively environmental variable dynamics. The specific objectives are (1) to assess environmental variables based on remote sensing time series and (2) to develop empirical models to forecast environmental variables. These objectives have been achieved in four applications which specific objectives are (1) assessing and mapping cotton crop phenological stages using spectral and phenometric analyses, (2) assessing and modeling fire seasonality in two different ecoregions by dynamic models, (3) forecasting forest fire risk on a pixel basis by dynamic models, and (4) assessing vegetation functioning based on temporal autocorrelation and phenometric analysis. The results of this dissertation show the usefulness of function fitting procedures to model AS1 and AS2. Phenometrics derived from function fitting procedure makes it possible to identify cotton crop phenological stages. Spectral analysis has demonstrated quantitatively the presence of one cycle in AS2 and two in AS1 and the unimodal and bimodal behaviour of fire seasonality in the Mediterranean and temperate ecoregions respectively. Autoregressive models has been used to characterize the dynamics of fire seasonality in two ecoregions and to forecasts accurately fire risk on a pixel basis. The usefulness of temporal autocorrelation to define and characterized land surface functioning has been demonstrated. And finally the “Optical Functional Types” concept has been proposed, in this approach pixels could be as temporal unities based on its temporal dynamics or functioning.

Carbon dioxide emissions from semi-arid soils amended with biochar alone or combined with mineral and organic fertilizers

Semi-arid soils cover a significant area of Earth s land surface and typically contain large amounts of inorganic C. Determining the effects of biochar additions on CO2 emissions fromsemi-arid soils is therefore essential for evaluating the potential of biochar as a climate change mitigation strategy. Here, we measured the CO2 that evolved from semi-arid calcareous soils amended with biochar at rates of 0 and 20 t ha?1 in a full factorial combination with three different fertilizers (mineral fertilizer, municipal solid waste compost, and sewage sludge) applied at four rates (equivalent to 0, 75, 150, and 225 kg potentially available N ha?1) during 182 days of aerobic incubation. A double exponential model, which describes cumulative CO2 emissions from two active soil C compartments with different turnover rates (one relatively stable and the other more labile), was found to fit verywell all the experimental datasets. In general, the organic fertilizers increased the size and decomposition rate of the stable and labile soil C pools. In contrast, biochar addition had no effects on any of the double exponential model parameters and did not interact with the effects ascribed to the type and rate of fertilizer. After 182 days of incubation, soil organic and microbial biomass C contents tended to increase with increasing the application rates of organic fertilizer, especially of compost, whereas increasing the rate of mineral fertilizer tended to suppress microbial biomass. Biochar was found to increase both organic and inorganic C contents in soil and not to interactwith the effects of type and rate of fertilizer on C fractions. As a whole, our results suggest that the use of biochar as enhancer of semi-arid soils, either alone or combined with mineral and organic fertilizers, is unlikely to increase abiotic and biotic soil CO2 emissions.

Modelo para la integración del trazado de infraestructuras lineales en el paisaje y el medio ambiente basado en SIG

El análisis de las diferentes alternativas en la planificación y diseño de corredores y trazados de carreteras debe basarse en la correcta definición de variables territoriales que sirvan como criterios para la toma de decisión y esto requiere un análisis ambiental preliminar de esas variables de calidad. En España, los estudios de viabilidad de nuevas carreteras y autovías están asociados a una fase del proceso de decisión que se corresponde con el denominado Estudio Informativo, el cual establece condicionantes físicos, ambientales, de uso del suelo y culturales que deben ser considerados en las primeras fases de la definición del trazado de un corredor de carretera. Así, la metodología más frecuente es establecer diferentes niveles de capacidad de acogida del territorio en el área de estudio con el fin de resumir las variables territoriales en mapas temáticos y facilitar el proceso de trazado de las alternativas de corredores de carretera. El paisaje es un factor limitante a tener en cuenta en la planificación y diseño de carreteras y, por tanto, deben buscarse trazados más sostenibles en relación con criterios estéticos y ecológicos del mismo. Pero este factor no es frecuentemente analizado en los Estudios Informativos e incluso, si es considerado, los estudios específicos de la calidad del paisaje (estético y ecológico) y de las formas del terreno no incorporan las recomendaciones de las guías de trazado para evitar o reducir los impactos en el paisaje. Además, los mapas de paisaje que se generan en este tipo de estudios no se corresponden con la escala de desarrollo del Estudio Informativo (1:5.000). Otro déficit común en planificación de corredores y trazados de carreteras es que no se tiene en cuenta la conectividad del paisaje durante el proceso de diseño de la carretera para prevenir la afección a los corredores de fauna existentes en el paisaje. Este déficit puede originar un posterior efecto barrera en los movimientos dispersivos de la fauna y la fragmentación de sus hábitats debido a la ocupación parcial o total de las teselas de hábitats con importancia biológica para la fauna (o hábitats focales) y a la interrupción de los corredores de fauna que concentran esos movimientos dispersivos de la fauna entre teselas. El objetivo principal de esta tesis es mejorar el estudio del paisaje para prevenir su afección durante el proceso de trazado de carreteras, facilitar la conservación de los corredores de fauna (o pasillos verdes) y la localización de medidas preventivas y correctoras en términos de selección y cuantificación de factores de idoneidad a fin de reducir los impactos visuales y ecológicos en el paisaje a escala local. Concretamente, la incorporación de valores cuantitativos y bien justificados en el proceso de decisión permite incrementar la transparencia en el proceso de diseño de corredores y trazados de carreteras. Con este fin, se han planteado cuatro preguntas específicas en esta investigación (1) ¿Cómo se seleccionan y evalúan los factores territoriales limitantes para localizar una nueva carretera por los profesionales españoles de planificación del territorio en relación con el paisaje? (2) ¿Cómo pueden ser definidos los corredores de fauna a partir de factores del paisaje que influyen en los movimientos dispersivos de la fauna? (3) ¿Cómo pueden delimitarse y evaluarse los corredores de fauna incluyendo el comportamiento parcialmente errático en los movimientos dispersivos de la fauna y el efecto barrera de los elementos antrópicos a una escala local? (4) ¿Qué y cómo las recomendaciones de diseño de carreteras relacionadas con el paisaje y las formas del terreno pueden ser incluidas en un modelo de Sistemas de Información Geográfica (SIG) para ayudar a los ingenieros civiles durante el proceso de diseño de un trazado de carreteras bajo el punto de vista de la sostenibilidad?. Esta tesis doctoral propone nuevas metodologías que mejoran el análisis visual y ecológico del paisaje utilizando indicadores y modelos SIG para obtener alternativas de trazado que produzcan un menor impacto en el paisaje. Estas metodologías fueron probadas en un paisaje heterogéneo con una alta tasa de densidad de corzo (Capreolus capreolus L.), uno de los grandes mamíferos más atropellados en la red de carreteras españolas, y donde está planificada la construcción de una nueva autovía que atravesará la mitad del área de distribución del corzo. Inicialmente, se han analizado las variables utilizadas en 22 estudios de proyectos de planificación de corredores de carreteras promovidos por el Ministerio de Fomento entre 2006 y 2008. Estas variables se agruparon según condicionantes físicos, ambientales, de usos del suelo y culturales con el fin de comparar los valores asignados de capacidad de acogida del territorio a cada variable en los diferentes estudios revisados. Posteriormente, y como etapa previa de un análisis de conectividad, se construyó un mapa de resistencia de los movimientos dispersivos del corzo en base a la literatura y al juicio de expertos. Usando esta investigación como base, se le asignó un valor de resistencia a cada factor seleccionado para construir la matriz de resistencia, ponderándolo y combinándolo con el resto de factores usando el proceso analítico jerárquico y los operadores de lógica difusa como métodos de análisis multicriterio. Posteriormente, se diseñó una metodología SIG para delimitar claramente la extensión física de los corredores de fauna de acuerdo a un valor umbral de ancho geométrico mínimo, así como la existencia de múltiples potenciales conexiones entre cada par de teselas de hábitats presentes en el paisaje estudiado. Finalmente, se realizó un procesado de datos Light Detection and Ranging (LiDAR) y un modelo SIG para calcular la calidad del paisaje (estético y ecológico), las formas del terreno que presentan características similares para trazar una carretera y la acumulación de vistas de potenciales conductores y observadores de los alrededores de la nueva vía. Las principales contribuciones de esta investigación al conocimiento científico existente en el campo de la evaluación del impacto ambiental en relación al diseño de corredores y trazados de carreteras son cuatro. Primero, el análisis realizado de 22 Estudios Informativos de planificación de carreteras reveló que los métodos aplicados por los profesionales para la evaluación de la capacidad de acogida del territorio no fue suficientemente estandarizada, ya que había una falta de uniformidad en el uso de fuentes cartográficas y en las metodologías de evaluación de la capacidad de acogida del territorio, especialmente en el análisis de la calidad del paisaje estético y ecológico. Segundo, el análisis realizado en esta tesis destaca la importancia de los métodos multicriterio para estructurar, combinar y validar factores que limitan los movimientos dispersivos de la fauna en el análisis de conectividad. Tercero, los modelos SIG desarrollados Generador de alternativas de corredores o Generator of Alternative Corridors (GAC) y Eliminador de Corredores Estrechos o Narrow Corridor Eraser (NCE) pueden ser aplicados sistemáticamente y sobre una base científica en análisis de conectividad como una mejora de las herramientas existentes para la comprensión el paisaje como una red compuesta por nodos y enlaces interconectados. Así, ejecutando los modelos GAC y NCE de forma iterativa, pueden obtenerse corredores alternativos con similar probabilidad de ser utilizados por la fauna y sin que éstos presenten cuellos de botella. Cuarto, el caso de estudio llevado a cabo de prediseño de corredores y trazado de una nueva autovía ha sido novedoso incluyendo una clasificación semisupervisada de las formas del terreno, filtrando una nube de puntos LiDAR e incluyendo la nueva geometría 3D de la carretera en el Modelo Digital de Superficie (MDS). El uso combinado del procesamiento de datos LiDAR y de índices y clasificaciones geomorfológicas puede ayudar a los responsables encargados en la toma de decisiones a evaluar qué alternativas de trazado causan el menor impacto en el paisaje, proporciona una visión global de los juicios de valor más aplicados y, en conclusión, define qué medidas de integración paisajística correctoras deben aplicarse y dónde. ABSTRACT The assessment of different alternatives in road-corridor planning and layout design must be based on a number of well-defined territorial variables that serve as decision-making criteria, and this requires a high-quality preliminary environmental analysis of those quality variables. In Spain, feasibility studies for new roads and motorways are associated to a phase of the decision procedure which corresponds with the one known as the Informative Study, which establishes the physical, environmental, land-use and cultural constraints to be considered in the early stages of defining road corridor layouts. The most common methodology is to establish different levels of Territorial Carrying Capacity (TCC) in the study area in order to summarize the territorial variables on thematic maps and facilitate the tracing process of road-corridor layout alternatives. Landscape is a constraint factor that must be considered in road planning and design, and the most sustainable layouts should be sought based on aesthetic and ecological criteria. However this factor is not often analyzed in Informative Studies and even if it is, baseline studies on landscape quality (aesthetic and ecological) and landforms do not usually include the recommendations of road tracing guides designed to avoid or reduce impacts on the landscape. The resolution of the landscape maps produced in this type of studies does not comply with the recommended road design scale (1:5,000) in the regulations for the Informative Study procedure. Another common shortcoming in road planning is that landscape ecological connectivity is not considered during road design in order to avoid affecting wildlife corridors in the landscape. In the prior road planning stage, this issue could lead to a major barrier effect for fauna dispersal movements and to the fragmentation of their habitat due to the partial or total occupation of habitat patches of biological importance for the fauna (or focal habitats), and the interruption of wildlife corridors that concentrate fauna dispersal movements between patches. The main goal of this dissertation is to improve the study of the landscape and prevent negative effects during the road tracing process, and facilitate the preservation of wildlife corridors (or green ways) and the location of preventive and corrective measures by selecting and quantifying suitability factors to reduce visual and ecological landscape impacts at a local scale. Specifically the incorporation of quantitative and well-supported values in the decision-making process provides increased transparency in the road corridors and layouts design process. Four specific questions were raised in this research: (1) How are territorial constraints selected and evaluated in terms of landscape by Spanish land-planning practitioners before locating a new road? (2) How can wildlife corridors be defined based on the landscape factors influencing the dispersal movements of fauna? (3) How can wildlife corridors be delimited and assessed to include the partially erratic movements of fauna and the barrier effect of the anthropic elements at a local scale? (4) How recommendations of road design related to landscape and landforms can be included in a Geographic Information System (GIS) model to aid civil engineers during the road layout design process and support sustainable development? This doctoral thesis proposes new methodologies that improve the assessment of the visual and ecological landscape character using indicators and GIS models to obtain road layout alternatives with a lower impact on the landscape. These methodologies were tested on a case study of a heterogeneous landscape with a high density of roe deer (Capreolus capreolus L.) –one of the large mammals most commonly hit by vehicles on the Spanish road network– and where a new motorway is planned to pass through the middle of their distribution area. We explored the variables used in 22 road-corridor planning projects sponsored by the Ministry of Public Works between 2006 and 2008. These variables were grouped into physical, environmental, land-use and cultural constraints for the purpose of comparing the TCC values assigned to each variable in the various studies reviewed. As a prior stage in a connectivity analysis, a map of resistance to roe deer dispersal movements was created based on the literature and experts judgment. Using this research as a base, each factor selected to build the matrix was assigned a resistance value and weighted and combined with the rest of the factors using the analytic hierarchy process (AHP) and fuzzy logic operators as multicriteria assessment (MCA) methods. A GIS methodology was designed to clearly delimit the physical area of wildlife corridors according to a geometric threshold width value, and the multiple potential connections between each pair of habitat patches in the landscape. A Digital Surface Model Light Detection and Ranging (LiDAR) dataset processing and a GIS model was performed to determine landscape quality (aesthetic and ecological) and landforms with similar characteristics for the road layout, and the cumulative viewshed of potential drivers and observers in the area surrounding the new motorway. The main contributions of this research to current scientific knowledge in the field of environmental impact assessment for road corridors and layouts design are four. First, the analysis of 22 Informative Studies on road planning revealed that the methods applied by practitioners for assessing the TCC were not sufficiently standardized due to the lack of uniformity in the cartographic information sources and the TCC valuation methodologies, especially in the analysis of the aesthetic and ecological quality of the landscape. Second, the analysis in this dissertation highlights the importance of multicriteria methods to structure, combine and validate factors that constrain wildlife dispersal movements in the connectivity analysis. Third, the “Generator of Alternative Corridors (GAC)” and “Narrow Corridor Eraser (NCE)” GIS models developed can be applied systematically and on a scientific basis in connectivity analyses to improve existing tools and understand landscape as a network composed of interconnected nodes and links. Thus, alternative corridors with similar probability of use by fauna and without bottlenecks can be obtained by iteratively running GAC and NCE models. Fourth, our case study of new motorway corridors and layouts design innovatively included semi-supervised classification of landforms, filtering of LiDAR point clouds and new 3D road geometry on the Digital Surface Model (DSM). The combined used of LiDAR data processing and geomorphological indices and classifications can help decision-makers assess which road layouts produce lower impacts on the landscape, provide an overall insight into the most commonly applied value judgments, and in conclusion, define which corrective measures should be applied in terms of landscaping, and where.

Análisis, desarrollo y optimización de un sistema para el diseño de redes topográficas valorando el modelo digital del terreno

El presente trabajo tiene como objetivo general el análisis de las técnicas de diseño y optimización de redes topográficas, observadas mediante topografía convencional (no satelital) el desarrollo e implementación de un sistema informático capaz de ayudar a la definición de la geometría más fiable y precisa, en función de la orografía del terreno donde se tenga que ubicar. En primer lugar se realizará un estudio de la metodología del ajuste mediante mínimos cuadrados y la propagación de varianzas, para posteriormente analizar su dependencia de la geometría que adopte la red. Será imprescindible determinar la independencia de la matriz de redundancia (R) de las observaciones y su total dependencia de la geometría, así como la influencia de su diagonal principal (rii), números de redundancia, para garantizar la máxima fiabilidad interna de la misma. También se analizará el comportamiento de los números de redundancia (rii) en el diseño de una red topográfica, la variación de dichos valores en función de la geometría, analizando su independencia respecto de las observaciones así como los diferentes niveles de diseño en función de los parámetros y datos conocidos. Ha de señalarse que la optimización de la red, con arreglo a los criterios expuestos, está sujeta a los condicionantes que impone la necesidad de que los vértices sean accesibles, y además sean visibles entre sí, aquellos relacionados por observaciones, situaciones que dependen esencialmente del relieve del terreno y de los obstáculos naturales o artificiales que puedan existir. Esto implica la necesidad de incluir en el análisis y en el diseño, cuando menos de un modelo digital del terreno (MDT), aunque lo más útil sería la inclusión en el estudio del modelo digital de superficie (MDS), pero esta opción no siempre será posible. Aunque el tratamiento del diseño esté basado en un sistema bidimensional se estudiará la posibilidad de incorporar un modelo digital de superficie (MDS); esto permitirá a la hora de diseñar el emplazamiento de los vértices de la red la viabilidad de las observaciones en función de la orografía y los elementos, tanto naturales como artificiales, que sobre ella estén ubicados. Este sistema proporcionaría, en un principio, un diseño óptimo de una red constreñida, atendiendo a la fiabilidad interna y a la precisión final de sus vértices, teniendo en cuenta la orografía, lo que equivaldría a resolver un planteamiento de diseño en dos dimensiones y media1; siempre y cuando se dispusiera de un modelo digital de superficie o del terreno. Dado que la disponibilidad de obtener de manera libre el MDS de las zonas de interés del proyecto, hoy en día es costoso2, se planteará la posibilidad de conjuntar, para el estudio del diseño de la red, de un modelo digital del terreno. Las actividades a desarrollar en el trabajo de esta tesis se describen en esta memoria y se enmarcan dentro de la investigación para la que se plantean los siguientes objetivos globales: 1. Establecer un modelo matemático del proceso de observación de una red topográfica, atendiendo a todos los factores que intervienen en el mismo y a su influencia sobre las estimaciones de las incógnitas que se obtienen como resultado del ajuste de las observaciones. 2. Desarrollar un sistema que permita optimizar una red topográfica en sus resultados, aplicando técnicas de diseño y simulación sobre el modelo anterior. 3. Presentar una formulación explícita y rigurosa de los parámetros que valoran la fiabilidad de una red topográfica y de sus relaciones con el diseño de la misma. El logro de este objetivo se basa, además de en la búsqueda y revisión de las fuentes, en una intensa labor de unificación de notaciones y de construcción de pasos intermedios en los desarrollos matemáticos. 4. Elaborar una visión conjunta de la influencia del diseño de una red, en los seis siguientes factores (precisiones a posteriori, fiabilidad de las observaciones, naturaleza y viabilidad de las mismas, instrumental y metodología de estacionamiento) como criterios de optimización, con la finalidad de enmarcar el tema concreto que aquí se aborda. 5. Elaborar y programar los algoritmos necesarios para poder desarrollar una aplicación que sea capaz de contemplar las variables planteadas en el apartado anterior en el problema del diseño y simulación de redes topográficas, contemplando el modelo digital de superficie. Podrían considerarse como objetivos secundarios, los siguientes apartados: Desarrollar los algoritmos necesarios para interrelacionar el modelo digital del terreno con los propios del diseño. Implementar en la aplicación informática la posibilidad de variación, por parte del usuario, de los criterios de cobertura de los parámetros (distribución normal o t de Student), así como los grados de fiabilidad de los mismos ABSTRACT The overall purpose of this work is the analysis of the techniques of design and optimization for geodetic networks, measured with conventional survey methods (not satellite), the development and implementation of a computational system capable to help on the definition of the most liable and accurate geometry, depending on the land orography where the network has to be located. First of all, a study of the methodology by least squares adjustment and propagation of variances will be held; then, subsequently, analyze its dependency of the geometry that the network will take. It will be essential to determine the independency of redundancy matrix (R) from the observations and its absolute dependency from the network geometry, as well as the influence of the diagonal terms of the R matrix (rii), redundancy numbers, in order to ensure maximum re liability of the network. It will also be analyzed first the behavior of redundancy numbers (rii) in surveying network design, then the variation of these values depending on the geometry with the analysis of its independency from the observations, and finally the different design levels depending on parameters and known data. It should be stated that network optimization, according to exposed criteria, is subject to the accessibility of the network points. In addition, common visibility among network points, which of them are connected with observations, has to be considered. All these situations depends essentially on the terrain relief and the natural or artificial obstacles that should exist. Therefore, it is necessary to include, at least, a digital terrain model (DTM), and better a digital surface model (DSM), not always available. Although design treatment is based on a bidimensional system, the possibility of incorporating a digital surface model (DSM) will be studied; this will allow evaluating the observations feasibility based on the terrain and the elements, both natural and artificial, which are located on it, when selecting network point locations. This system would provide, at first, an optimal design of a constrained network, considering both the internal reliability and the accuracy of its points (including the relief). This approach would amount to solving a “two and a half dimensional”3 design, if a digital surface model is available. As the availability of free DSM4 of the areas of interest of the project today is expensive, the possibility of combining a digital terrain model will arise. The activities to be developed on this PhD thesis are described in this document and are part of the research for which the following overall objectives are posed: 1. To establish a mathematical model for the process of observation of a survey network, considering all the factors involved and its influence on the estimates of the unknowns that are obtained as a result of the observations adjustment. 2. To develop a system to optimize a survey network results, applying design and simulation techniques on the previous model. 3. To present an explicit and rigorous formulation of parameters which assess the reliability of a survey network and its relations with the design. The achievement of this objective is based, besides on the search and review of sources, in an intense work of unification of notation and construction of intermediate steps in the mathematical developments. 4. To develop an overview of the influence on the network design of six major factors (posterior accuracy, observations reliability, viability of observations, instruments and station methodology) as optimization criteria, in order to define the subject approached on this document. 5. To elaborate and program the algorithms needed to develop an application software capable of considering the variables proposed in the previous section, on the problem of design and simulation of surveying networks, considering the digital surface model. It could be considered as secondary objectives, the following paragraphs: To develop the necessary algorithms to interrelate the digital terrain model with the design ones. To implement in the software application the possibility of variation of the coverage criteria parameters (normal distribution or Student t test) and therefore its degree of reliability.

Aplicaciones de interés forestal de las imágenes obtenidas con el sensor Multi-angle Imaging SpectroRadiometer (MISR)

Las aplicaciones de la teledetección al seguimiento de lo que ocurre en la superficie terrestre se han ido multiplicando y afinando con el lanzamiento de nuevos sensores por parte de las diferentes agencias espaciales. La necesidad de tener información actualizada cada poco tiempo y espacialmente homogénea, ha provocado el desarrollo de nuevos programas como el Earth Observing System (EOS) de la National Aeronautics and Space Administration (NASA). Uno de los sensores que incorpora el buque insignia de ese programa, el satélite TERRA, es el Multi-angle Imaging SpectroRadiometer (MISR), diseñado para capturar información multiangular de la superficie terrestre. Ya desde los años 1970, se conocía que la reflectancia de las diversas ocupaciones y usos del suelo variaba en función del ángulo de observación y de iluminación, es decir, que eran anisotrópicas. Tal variación estaba además relacionada con la estructura tridimensional de tales ocupaciones, por lo que se podía aprovechar tal relación para obtener información de esa estructura, más allá de la que pudiera proporcionar la información meramente espectral. El sensor MISR incorpora 9 cámaras a diferentes ángulos para capturar 9 imágenes casi simultáneas del mismo punto, lo que permite estimar con relativa fiabilidad la respuesta anisotrópica de la superficie terrestre. Varios trabajos han demostrado que se pueden estimar variables relacionadas con la estructura de la vegetación con la información que proporciona MISR. En esta Tesis se ha realizado una primera aplicación a la Península Ibérica, para comprobar su utilidad a la hora de estimar variables de interés forestal. En un primer paso se ha analizado la variabilidad temporal que se produce en los datos, debido a los cambios en la geometría de captación, es decir, debido a la posición relativa de sensores y fuente de iluminación, que en este caso es el Sol. Se ha comprobado cómo la anisotropía es mayor desde finales de otoño hasta principios de primavera debido a que la posición del Sol es más cercana al plano de los sensores. También se ha comprobado que los valores máximo y mínimo se van desplazando temporalmente entre el centro y el extremo angular. En la caracterización multiangular de ocupaciones del suelo de CORINE Land Cover que se ha realizado, se puede observar cómo la forma predominante en las imágenes con el Sol más alto es convexa con un máximo en la cámara más cercana a la fuente de iluminación. Sin embargo, cuando el Sol se encuentra mucho más bajo, ese máximo es muy externo. Por otra parte, los datos obtenidos en verano son mucho más variables para cada ocupación que los de noviembre, posiblemente debido al aumento proporcional de las zonas en sombra. Para comprobar si la información multiangular tiene algún efecto en la obtención de imágenes clasificadas según ocupación y usos del suelo, se han realizado una serie de clasificaciones variando la información utilizada, desde sólo multiespectral, a multiangular y multiespectral. Los resultados muestran que, mientras para las clasificaciones más genéricas la información multiangular proporciona los peores resultados, a medida que se amplían el número de clases a obtener tal información mejora a lo obtenido únicamente con información multiespectral. Por otra parte, se ha realizado una estimación de variables cuantitativas como la fracción de cabida cubierta (Fcc) y la altura de la vegetación a partir de información proporcionada por MISR a diferentes resoluciones. En el valle de Alcudia (Ciudad Real) se ha estimado la fracción de cabida cubierta del arbolado para un píxel de 275 m utilizando redes neuronales. Los resultados muestran que utilizar información multiespectral y multiangular puede mejorar casi un 20% las estimaciones realizadas sólo con datos multiespectrales. Además, las relaciones obtenidas llegan al 0,7 de R con errores inferiores a un 10% en Fcc, siendo éstos mucho mejores que los obtenidos con el producto elaborado a partir de datos multiespectrales del sensor Moderate Resolution Imaging Spectroradiometer (MODIS), también a bordo de Terra, para la misma variable. Por último, se ha estimado la fracción de cabida cubierta y la altura efectiva de la vegetación para 700.000 ha de la provincia de Murcia, con una resolución de 1.100 m. Los resultados muestran la relación existente entre los datos espectrales y los multiangulares, obteniéndose coeficientes de Spearman del orden de 0,8 en el caso de la fracción de cabida cubierta de la vegetación, y de 0,4 en el caso de la altura efectiva. Las estimaciones de ambas variables con redes neuronales y diversas combinaciones de datos, arrojan resultados con R superiores a 0,85 para el caso del grado de cubierta vegetal, y 0,6 para la altura efectiva. Los parámetros multiangulares proporcionados en los productos elaborados con MISR a 1.100 m, no obtienen buenos resultados por sí mismos pero producen cierta mejora al incorporarlos a la información espectral. Los errores cuadráticos medios obtenidos son inferiores a 0,016 para la Fcc de la vegetación en tanto por uno, y 0,7 m para la altura efectiva de la misma. Regresiones geográficamente ponderadas muestran además que localmente se pueden obtener mejores resultados aún mejores, especialmente cuando hay una mayor variabilidad espacial de las variables estimadas. En resumen, la utilización de los datos proporcionados por MISR ofrece una prometedora vía de mejora de resultados en la media-baja resolución, tanto para la clasificación de imágenes como para la obtención de variables cuantitativas de la estructura de la vegetación. ABSTRACT Applications of remote sensing for monitoring what is happening on the land surface have been multiplied and refined with the launch of new sensors by different Space Agencies. The need of having up to date and spatially homogeneous data, has led to the development of new programs such as the Earth Observing System (EOS) of the National Aeronautics and Space Administration (NASA). One of the sensors incorporating the flagship of that program, the TERRA satellite, is Multi-angle Imaging Spectroradiometer (MISR), designed to capture the multi-angle information of the Earth's surface. Since the 1970s, it was known that the reflectance of various land covers and land uses varied depending on the viewing and ilumination angles, so they are anisotropic. Such variation was also related to the three dimensional structure of such covers, so that one could take advantage of such a relationship to obtain information from that structure, beyond which spectral information could provide. The MISR sensor incorporates 9 cameras at different angles to capture 9 almost simultaneous images of the same point, allowing relatively reliable estimates of the anisotropic response of the Earth's surface. Several studies have shown that we can estimate variables related to the vegetation structure with the information provided by this sensor, so this thesis has made an initial application to the Iberian Peninsula, to check their usefulness in estimating forest variables of interest. In a first step we analyzed the temporal variability that occurs in the data, due to the changes in the acquisition geometry, i.e. the relative position of sensor and light source, which in this case is the Sun. It has been found that the anisotropy is greater from late fall through early spring due to the Sun's position closer to the plane of the sensors. It was also found that the maximum and minimum values are displaced temporarily between the center and the ends. In characterizing CORINE Land Covers that has been done, one could see how the predominant form in the images with the highest sun is convex with a maximum in the camera closer to the light source. However, when the sun is much lower, the maximum is external. Moreover, the data obtained for each land cover are much more variable in summer that in November, possibly due to the proportional increase in shadow areas. To check whether the information has any effect on multi-angle imaging classification of land cover and land use, a series of classifications have been produced changing the data used, from only multispectrally, to multi-angle and multispectral. The results show that while for the most generic classifications multi-angle information is the worst, as there are extended the number of classes to obtain such information it improves the results. On the other hand, an estimate was made of quantitative variables such as canopy cover and vegetation height using information provided by MISR at different resolutions. In the valley of Alcudia (Ciudad Real), we estimated the canopy cover of trees for a pixel of 275 m by using neural networks. The results showed that using multispectral and multiangle information can improve by almost 20% the estimates that only used multispectral data. Furthermore, the relationships obtained reached an R coefficient of 0.7 with errors below 10% in canopy cover, which is much better result than the one obtained using data from the Moderate Resolution Imaging Spectroradiometer (MODIS), also onboard Terra, for the same variable. Finally we estimated the canopy cover and the effective height of the vegetation for 700,000 hectares in the province of Murcia, with a spatial resolution of 1,100 m. The results show a relationship between the spectral and the multi-angle data, and provide estimates of the canopy cover with a Spearman’s coefficient of 0.8 in the case of the vegetation canopy cover, and 0.4 in the case of the effective height. The estimates of both variables using neural networks and various combinations of data, yield results with an R coefficient greater than 0.85 for the case of the canopy cover, and 0.6 for the effective height. Multi-angle parameters provided in the products made from MISR at 1,100 m pixel size, did not produce good results from themselves but improved the results when included to the spectral information. The mean square errors were less than 0.016 for the canopy cover, and 0.7 m for the effective height. Geographically weighted regressions also showed that locally we can have even better results, especially when there is high spatial variability of estimated variables. In summary, the use of the data provided by MISR offers a promising way of improving remote sensing performance in the low-medium spatial resolution, both for image classification and for the estimation of quantitative variables of the vegetation structure.

The use of geographic information systems for the optimal location of biomass power plants in the Madrid Community (Spain)

This article has been extracted from the results of a thesis entitled “Potential bioelectricity production of the Madrid Community Agricultural Regions based on rye and triticale biomass.” The aim was, first, to quantify the potential of rye (Secale Cereale L.) and triticale ( Triticosecale Aestivum L.) biomass in each of the Madrid Community agricultural regions, and second, to locate the most suitable areas for the installation of power plants using biomass. At least 17,339.9 t d.m. of rye and triticale would be required to satisfy the biomass needs of a 2.2 MW power plant, (considering an efficiency of 21.5%, 8,000 expected operating hours/year and a biomass LCP of 4,060 kcal/kg for both crops), and 2,577 ha would be used (which represent 2.79% of the Madrid Community fallow dry land surface). Biomass yields that could be achieved in Madrid Community using 50% of the fallow dry land surface (46,150 ha representing 5.75% of the Community area), based on rye and triticale crops, are estimated at 84,855, 74,906, 70,109, 50,791, 13,481, and 943 t annually for the Campiña, Vegas, Sur Occidental, Área Metropolitana, Lozoya-Somosierra, and Guadarrama regions. The latter represents a bioelectricity potential of 10.77, 9.5, 8.9, 6.44, 1.71, and 0.12 MW, respectively.

A two-dimensional finite element model of front surface current flow in cells under non-uniform, concentrated illumination

A two-dimensional finite element model of current flow in the front surface of a PV cell is presented. In order to validate this model we perform an experimental test. Later, particular attention is paid to the effects of non-uniform illumination in the finger direction which is typical in a linear concentrator system. Fill factor, open circuit voltage and efficiency are shown to decrease with increasing degree of non-uniform illumination. It is shown that these detrimental effects can be mitigated significantly by reoptimization of the number of front surface metallization fingers to suit the degree of non-uniformity. The behavior of current flow in the front surface of a cell operating at open circuit voltage under non-uniform illumination is discussed in detail.

Estimation of the solubility parameters of model plant surfaces and agrochemicals: a valuable tool for understanding plant surface interactions

Background Most aerial plant parts are covered with a hydrophobic lipid-rich cuticle, which is the interface between the plant organs and the surrounding environment. Plant surfaces may have a high degree of hydrophobicity because of the combined effects of surface chemistry and roughness. The physical and chemical complexity of the plant cuticle limits the development of models that explain its internal structure and interactions with surface-applied agrochemicals. In this article we introduce a thermodynamic method for estimating the solubilities of model plant surface constituents and relating them to the effects of agrochemicals. Results Following the van Krevelen and Hoftyzer method, we calculated the solubility parameters of three model plant species and eight compounds that differ in hydrophobicity and polarity. In addition, intact tissues were examined by scanning electron microscopy and the surface free energy, polarity, solubility parameter and work of adhesion of each were calculated from contact angle measurements of three liquids with different polarities. By comparing the affinities between plant surface constituents and agrochemicals derived from (a) theoretical calculations and (b) contact angle measurements we were able to distinguish the physical effect of surface roughness from the effect of the chemical nature of the epicuticular waxes. A solubility parameter model for plant surfaces is proposed on the basis of an increasing gradient from the cuticular surface towards the underlying cell wall. Conclusions The procedure enabled us to predict the interactions among agrochemicals, plant surfaces, and cuticular and cell wall components, and promises to be a useful tool for improving our understanding of biological surface interactions.

Sensitivity of a distributed temperature-radiation index melt model based on AWS observations and surface energy balance fluxes, Hurd Peninsula glaciers, Livingston Island, Antarctica

We use an automatic weather station and surface mass balance dataset spanning four melt seasons collected on Hurd Peninsula Glaciers, South Shetland Islands, to investigate the point surface energy balance, to determine the absolute and relative contribution of the various energy fluxes acting on the glacier surface and to estimate the sensitivity of melt to ambient temperature changes. Long-wave incoming radiation is the main energy source for melt, while short-wave radiation is the most important flux controlling the variation of both seasonal and daily mean surface energy balance. Short-wave and long-wave radiation fluxes do, in general, balance each other, resulting in a high correspondence between daily mean net radiation flux and available melt energy flux. We calibrate a distributed melt model driven by air temperature and an expression for the incoming short-wave radiation. The model is calibrated with the data from one of the melt seasons and validated with the data of the three remaining seasons. The model results deviate at most 140 mm w.e. from the corresponding observations using the glaciological method. The model is very sensitive to changes in ambient temperature: a 0.5 ◦ C increase results in 56 % higher melt rates.

Estimation of the solubility parameters of model plant surfaces and agrochemicals: a valuable tool for understanding plant surface interactions

Background Most aerial plant parts are covered with a hydrophobic lipid-rich cuticle, which is the interface between the plant organs and the surrounding environment. Plant surfaces may have a high degree of hydrophobicity because of the combined effects of surface chemistry and roughness. The physical and chemical complexity of the plant cuticle limits the development of models that explain its internal structure and interactions with surface-applied agrochemicals. In this article we introduce a thermodynamic method for estimating the solubilities of model plant surface constituents and relating them to the effects of agrochemicals. Results Following the van Krevelen and Hoftyzer method, we calculated the solubility parameters of three model plant species and eight compounds that differ in hydrophobicity and polarity. In addition, intact tissues were examined by scanning electron microscopy and the surface free energy, polarity, solubility parameter and work of adhesion of each were calculated from contact angle measurements of three liquids with different polarities. By comparing the affinities between plant surface constituents and agrochemicals derived from (a) theoretical calculations and (b) contact angle measurements we were able to distinguish the physical effect of surface roughness from the effect of the chemical nature of the epicuticular waxes. A solubility parameter model for plant surfaces is proposed on the basis of an increasing gradient from the cuticular surface towards the underlying cell wall. Conclusions The procedure enabled us to predict the interactions among agrochemicals, plant surfaces, and cuticular and cell wall components, and promises to be a useful tool for improving our understanding of biological surface interactions.

A stochastic model updating method for parameter variability quantification based on response surface models and Monte Carlo simulation

Stochastic model updating must be considered for quantifying uncertainties inherently existing in real-world engineering structures. By this means the statistical properties,instead of deterministic values, of structural parameters can be sought indicating the parameter variability. However, the implementation of stochastic model updating is much more complicated than that of deterministic methods particularly in the aspects of theoretical complexity and low computational efficiency. This study attempts to propose a simple and cost-efficient method by decomposing a stochastic updating process into a series of deterministic ones with the aid of response surface models and Monte Carlo simulation. The response surface models are used as surrogates for original FE models in the interest of programming simplification, fast response computation and easy inverse optimization. Monte Carlo simulation is adopted for generating samples from the assumed or measured probability distributions of responses. Each sample corresponds to an individual deterministic inverse process predicting the deterministic values of parameters. Then the parameter means and variances can be statistically estimated based on all the parameter predictions by running all the samples. Meanwhile, the analysis of variance approach is employed for the evaluation of parameter variability significance. The proposed method has been demonstrated firstly on a numerical beam and then a set of nominally identical steel plates tested in the laboratory. It is found that compared with the existing stochastic model updating methods, the proposed method presents similar accuracy while its primary merits consist in its simple implementation and cost efficiency in response computation and inverse optimization.

An extension of Mohring’s model for land rent distribution

In an early paper Herbert Mohring (J. Poi Et on , 49 (1961)) presented a model for land rent distribution yielding the well-known result that the price of land must fall with the distance from the city center to offset transportation costs. Our paper is an extension of Mohring's model in which we relax some of his drastic simplifying assumptions. This extended model has been incorporated in a method for economic evaluation of city master plans which has been applied to a Swedish city. In this method the interdependence among housing, heating, and transportation, the dura-bility of urban structures, and the uncertainty of future demand are explicitly considered within a cost-benefit approach. Some empirical results from this pilot study concerning land rent distributions are also presented here.