Learning an L1-regularized Gaussian Bayesian Network in the Equivalence Class Space

Learning the structure of a graphical model from data is a common task in a wide range of practical applications. In this paper, we focus on Gaussian Bayesian networks, i.e., on continuous data and directed acyclic graphs with a joint probability density of all variables given by a Gaussian. We propose to work in an equivalence class search space, specifically using the k-greedy equivalence search algorithm. This, combined with regularization techniques to guide the structure search, can learn sparse networks close to the one that generated the data. We provide results on some synthetic networks and on modeling the gene network of the two biological pathways regulating the biosynthesis of isoprenoids for the Arabidopsis thaliana plant

Qualitative behaviour of L1 and L2 standard deviation in insulations measurements according to standard UNE EN ISO 140-4

Knowledge of the uncertainty of measurement of testing results is important when results have to be compared with limits and specifications. In the measurement of sound insulation following standards UNE EN ISO 140-4 the uncertainty of the final magnitude is mainly associated to the average sound pressure levels L1 and L2 measured. A parameter that allows us to quantify the spatial variation of the sound pressure level is the standard deviation of the pressure levels measured at different points of the room. In this work, for a wide number of measurements following standards UNE EN ISO 140-4 we analyzed qualitatively the behaviour of the standard deviation for L1 and L2. The study of sound fields in enclosed spaces is very difficult. There are a wide variety of rooms with different sound fields depending on factors as volume, geometry and materials. In general, we observe that the L1 and L2 standard deviations contain peaks and dips independent on characteristics of the rooms at single frequencies that could correspond to critical frequencies of walls, floors and windows or even to temporal alterations of the sound field. Also, in most measurements according to UNE EN ISO 140-4 a large similitude between L1 and L2 standard deviation is found. We believe that such result points to a coupled system between source and receiving rooms, mainly at low frequencies the shape of the L1 and L2 standard deviations is comparable to the velocity level standard deviation on a wall

Surface deformation studies of Tenerife Island, Spain from joint GPS-DInSAR observations

This work presents results for the three-dimensional displacement field at Tenerife Island calculated from campaign GPS and ascending and descending ENVISAT DInSAR interferograms. The goal of this work is to provide an example of the flexibility of the technique by fusing together new varieties of geodetic data, and to observe surface deformations and study precursors of potential activity in volcanic regions. Interferometric processing of ENVISAT data was performed with GAMMA software. All possible combinations were used to create interferograms and then stacking was used to increase signal-to-noise ratio. Decorrelated areas were widely observed, particularly for interferograms with large perpendicular baseline and large time span. Tropospheric signal was also observed which significantly complicated the interpretation. Subsidence signal was observed in the NW part of the island and around Mount Teide and agreed in some regions with campaign GPS data. It is expected that the technique will provide better results when more high quality DInSAR and GPS data is available

Instrumentación GPS de pruebas de carga en el Nuevo Puente de Ventas sobre la M-30 en Madrid

Se muestra en este artículo el trabajo realizado durante las pruebas de carga de puesta en servicio del Nuevo Puente de Ventas sobre la M-30 de Madrid, con el fin de determinar los desplazamientos producidos mediante la aplicación de técnicas GPS, así como la discusión de precisiones obtenidas y posibilidades que encierra este tipo de sistemas de instrumentación de deformaciones en obra civil.

Spanish National GPS Reference Station Network (ERGPS)

The Instituto Geográfico Nacional de España, thought its geodesy department, since 1997 has carried out the establisment of a GPS Reference Station Network (ERGPS) delivered all around Spain which allows millimetric co-ordinate results, as well as velocity fields in a Global Reference System (ITRFxx). It serves as support for other geodetic networks. Some of these stations are being integrated into the EUREF (EUropean REference Frame) Permanent Station Network. The ERGPS forms the zero order of the Spanish new geodesy

Red GPS Fiduciaria Nacional de España

El Instituto Geográfico Nacional, por medio del Área de Geodesia, está llevando a cabo el establecimiento de una Red de Estaciones Permanentes GPS que permitan obtener coordenadas muy precisas, así como sus campos de velocidades en un Sistema de Referencia Global (ITRFxx). Dichas estaciones pertenencen a la Red de Estaciones Permanentes de EUREF (EUropean REference Framen) y constituyen el órden cero de la Geodesia Española.

Monitorización gps del paso del ciclón Vince por la península ibérica

Se exponen aquí los desarrollos llevados a cabo para la monitorización del paso del Ciclón Vince, primer ciclón tropical documentado que alcanza la Península Ibérica, a través de las señales GPS de receptores en tierra durante el evento.

A GPS analysis for urban freight distribution

Daily life in urban centers has led to increasing and more demanding freight requirements. Manufacturers, retailers and other urban agents have thus tended towards more frequent and smaller deliveries, resulting in a growing use of light freight vehicles (<3.5 ton). This paper characterizes and analyzes urban freight distribution in order to generate new ways of understanding the phenomenon. Based on a case study of two different-sized Spanish cities using data from GPS, a vehicle observation survey and complementary driver's interviews, the authors propose a categorization of urban freight distribution. The results confirm GPS as a useful tool that allows the integration of dynamic traffic assignment data and diverse traffic operation patterns during different day periods, thereby improving delivery performance.

Red Nacional de Estaciones de Referencia GPS (ERGPS)

El Instituto Geográfico Nacional, por medio del Área de Geodesia, está llevando a cabo el establecimiento de una Red de Estaciones Permanentes GPS que permitan obtener coordenadas muy precisas, así como sus campos de velocidades en un Sistema de Referencia Global (ITRFxx). Dichas estaciones pertenecen a la Red de Estaciones Permanentes de EUREF (EUropean REference Frame) y constituyen el orden cero de la Geodesia Española.

De la triangulación al GPS: re-pensando la re-presentación.

El impacto de lo virtual en los nuevos sistemas de representación de la arquitectura.

Low-complexity timing synchronization scheme for MB-OFDM UWB receiver based on sign-bit

A unified low complexity sign-bit correlation based symbol timing synchronization scheme for Multiband Orthogonal Frequency Division Multiplexing (MB-OFDM) Ultra Wideband (UWB) receiver system is proposed. By using the time domain sequence of the packet/frame synchronization preamble, the proposed scheme is in charge of detecting the upcoming MB-OFDM symbol and it estimates the exact boundary of the start of Fast Fourier Transform (FFT) window. The proposed algorithm is implemented by using an efficient Hardware-Software co-simulation methodology. The effectiveness of the proposed synchronization scheme and the optimization criteria is confirmed by hardware implementation results.

Steady-state thermal analysis of an innovative receiver for linear Fresnel reflectors

The study of the performance of an innovative receiver for linear Fresnel reflectors is carried out in this paper, and the results are analyzed with a physics perspective of the process. The receiver consists of a bundle of tubes parallel to the mirror arrays, resulting on a smaller cross section for the same receiver width as the number of tubes increases, due to the diminution of their diameter. This implies higher heat carrier fluid speeds, and thus, a more effective heat transfer process, although it conveys higher pumping power as well. Mass flow is optimized for different tubes diameters, different impinging radiation intensities and different fluid inlet temperatures. It is found that the best receiver design, namely the tubes diameter that maximizes the exergetic efficiency for given working conditions, is similar for the cases studied. There is a range of tubes diameters that imply similar efficiencies, which can drive to capital cost reduction thanks to the flexibility of design. In addition, the length of the receiver is also optimized, and it is observed that the optimal length is similar for the working conditions considered. As a result of this study, it is found that this innovative receiver provides an optimum design for the whole day, even though impinging radiation intensity varies notably. Thermal features of this type of receiver could be the base of a new generation of concentrated solar power plants with a great potential for cost reduction, because of the simplicity of the system and the lower weigh of the components, plus the flexibility of using the receiver tubes for different streams of the heat carrier fluid.

Teller: telemetría a partir de datos GPS

El avance y desarrollo de las nuevas tecnologías ha GPS sean cada vez más efectivos y precisos. En la actualidad son usados por miles de personas en una gran variedad de aplicaciones, siendo la competición una de ellas.Detrás del funcionamiento de estas pequeñas unidades juega un papel muy importante la telemetría, una tecnología que cada vez es más relevante en el mundo actual, y que gracias a las avances tecnológicos sus aplicaciones son cada vez mayores. En este Trabajo de Fin de Grado se diseñará Teller, un programa realizado en Erlang que mediante la telemetría y la tecnología actual realizará cálculos físicos de recorridos realizados en motocicleta, tales como velocidad o aceleración (tangencial y radial), además de clasificar los trayectos en tramos, dependiendo de si son curvas o rectas. Al mismo tiempo se realizará un estudio de precisión del dispositivo GPS, cotejando sus datos con los obtenidos por Teller. Por último, toda esta información se mostrará en un mapa para que el usuario pueda visualizarlo y que de esta forma sirva como herramienta de información y aprendizaje. The development of new technologies has contributed to the improvement of GPS devices, making them more effective and accurate. Nowadays they are used by thousands of people in a wide variety of applications like competitions. The technology that is behind the functionality of those devices is the telemetry, which is getting more and more important in the real world. In this thesis a new program called Teller will be designed. Made in Erlang, it will use telemetry so as to obtain new and valuable data from a motorcycle track. Examples of this type of data can be speed and acceleration (either tangential and radial) for instance. Besides, Teller will classify the track into segments, depending if it is a curve or a straight. At the same time a study will be carried out in order to know how accurate the GPS device is. This will be achieved by comparing the data retrieved by the device with the data calculated by Teller. Finally, all this information will be shown in a map, so the user can see information about his route in a visual way. xi

Optimal polygonal L1 linearization and fast interpolation of nonlinear systems

The analysis of complex nonlinear systems is often carried out using simpler piecewise linear representations of them. A principled and practical technique is proposed to linearize and evaluate arbitrary continuous nonlinear functions using polygonal (continuous piecewise linear) models under the L1 norm. A thorough error analysis is developed to guide an optimal design of two kinds of polygonal approximations in the asymptotic case of a large budget of evaluation subintervals N. The method allows the user to obtain the level of linearization (N) for a target approximation error and vice versa. It is suitable for, but not limited to, an efficient implementation in modern Graphics Processing Units (GPUs), allowing real-time performance of computationally demanding applications. The quality and efficiency of the technique has been measured in detail on two nonlinear functions that are widely used in many areas of scientific computing and are expensive to evaluate.

Aplicación de GPS en la readaptación de lesiones en el fútbol profesional: estudio de un caso.

Utilización del gps en la recuperación de lesiones en fútbol