Comparison of vibration and rolling noise emission of resilient and solid monobloc railway wheels in underground lines

Flat or worn wheels rolling on rough or corrugated tracks can provoke airborne noise and ground-borne vibration, which can be a serious concern for nearby neighbours of urban rail transit lines. Among the various treatments used to reduce vibration and noise, resilient wheels play an important role. In conventional resilient wheels, a slightly prestressed V­shaped rubber ring is mounted between the steel wheel centre and tyre. The elastic layer enhances rolling noise and vibration suppression, as well as impact reduction on the track. In this paper the effectiveness of resilient wheels in underground lines, in comparison to monobloc ones, is assessed. The analysed resilient wheel is able to carry greater loads than standard resilient wheels used for light vehicles. It also presents a greater radial resiliency and a higher axial stiffness than conventional V­wheels. The finite element method was used in this study. A quarter car model was defined, in which the wheelset was modelled as an elastic body. Several simulations were performed in order to assess the vibrational behaviour of elastic wheels, including modal, harmonic and random vibration analysis, the latter allowing the introduction of realistic vertical track irregularities, as well as the influence of the running speed. Due to numerical problems some simplifications were needed. Parametric variations were also performed, in which the sensitivity of the whole system to variations of rubber prestress and Poisson’s ratio of the elastic material was assessed.Results are presented in the frequency domain, showing a better performance of the resilient wheels for frequencies over 200 Hz. This result reveals the ability of the analyzed design to mitigate rolling noise, but not structural vibrations, which are primarily found in the lower frequency range.

Community Structure in Soil Porous System

Diffusion controls the gaseous transport process in soils when advective transport is almost null. Knowledge of the soil structure and pore connectivity are critical issues to understand and modelling soil aeration, sequestration or emission of greenhouse gasses, volatilization of volatile organic chemicals among other phenomena. In the last decades these issues increased our attention as scientist have realize that soil is one of the most complex materials on the earth, within which many biological, physical and chemical processes that support life and affect climate change take place. A quantitative and explicit characterization of soil structure is difficult because of the complexity of the pore space. This is the main reason why most theoretical approaches to soil porosity are idealizations to simplify this system. In this work, we proposed a more realistic attempt to capture the complexity of the system developing a model that considers the size and location of pores in order to relate them into a network. In the model we interpret porous soils as heterogeneous networks where pores are represented by nodes, characterized by their size and spatial location, and the links representing flows between them. In this work we perform an analysis of the community structure of porous media of soils represented as networks. For different real soils samples, modelled as heterogeneous complex networks, spatial communities of pores have been detected depending on the values of the parameters of the porous soil model used. These types of models are named as Heterogeneous Preferential Attachment (HPA). Developing an exhaustive analysis of the model, analytical solutions are obtained for the degree densities and degree distribution of the pore networks generated by the model in the thermodynamic limit and shown that the networks exhibit similar properties to those observed in other complex networks. With the aim to study in more detail topological properties of these networks, the presence of soil pore community structures is studied. The detection of communities of pores, as groups densely connected with only sparser connections between groups, could contribute to understand the mechanisms of the diffusion phenomena in soils.

Community Structurein Soil Porous System.

Soil is well recognized as a highly complex system. The interaction and coupled physical, chemical, and biological processes and phenomena occurring in the soil environment at different spatial and temporal scales are the main reasons for such complexity. There is a need for appropriate methodologies to characterize soil porous systems with an interdisciplinary character. Four different real soil samples, presenting different textures, have been modeled as heterogeneous complex networks, applying a model known as the heterogeneous preferential attachment. An analytical study of the degree distributions in the soil model shows a multiscaling behavior in the connectivity degrees, leaving an empirically testable signature of heterogeneity in the topology of soil pore networks. We also show that the power-law scaling in the degree distribution is a robust trait of the soil model. Last, the detection of spatial pore communities, as densely connected groups with only sparser connections between them, has been studied for the first time in these soil networks. Our results show that the presence of these communities depends on the parameter values used to construct the network. These findings could contribute to understanding the mechanisms of the diffusion phenomena in soils, such as gas and water diffusion, development and dynamics of microorganisms, among others.

Levantamiento y red topográfica del parque "Juan Pablo II".

El objeto del presente proyecto es dotar al parque público “Juan Pablo II”, de una cartografía a escala 1/250, además de realizar el modelo digital del terreno de dicho parque. El trabajo va a consistir en un levantamiento topográfico del sector oeste del parque público “Juan Pablo II”. Dado que el parque en toda su dimensión se encuentra dividido en dos por la Avenida de Machupichu, siendo la oeste la que forma parte de este proyecto. El levantamiento se realizará mediante el método de observación G.N.S.S. denominado R.T.K. (Real Time Kinematic) que consiste en la obtención de coordenadas en tiempo real. Este levantamiento se realizará apoyándose en puntos de una red implantada, a la que se dotará de coordenadas por el método de observación G.N.S.S. denominado “Estático” y por metodología clásica. A la red se le dotará de coordenadas en el Sistema de Referencia Oficial. Se realizará la cartografía del parque a partir de los datos del levantamiento y con el uso de programas de CAD. Finalmente, se realizará un modelo digital del terreno. El parque público “Juan Pablo II” se encuentra situado en barrio de La Piovera, en el término municipal de Madrid, provincia de Madrid. El parque ocupa 6 hectáreas y es el elegido para nuestro proyecto. Este parque está limitado por el norte por la Avda. del Papa Negro, por el sur está limitado por la Avda. de las Piceas, por el este por la Avda. Machupichu, por el oeste por un pinar. 1.- Estudio de Redes para la obtención de la Red Básica: Por metodología G.N.S.S., se ha realizado cuatro simulaciones, teniendo como criterios: Longitud de la líneas base; Tiempo de observación; Precisiones obtenidas. Y comprobación de la Red Básica por metodología Clásica. 2.- Creación de aplicación para representar redes en Google Earth (Geodesicas-kml). Ante la falta de aplicaciones libres para esta opción de difusión de redes de manera fácil y gratuita, se creó esta aplicación. 3.- Diseño cartográfico, mapas a escala 1/250. Esta escala fue elegida porque se quería tener un buen detalle para la creación del MDT. 4.- Creación de MDT, y adaptado a visualización en Google Earth. Se eligió esta plataforma para que no se necesitase ninguna aplicación de pago y por su gran difusión, facilitando la divulgación de los MDT. 5.- Paseo virtual en el interior del parque. Película de un recorrido dentro del parque con todos los elementos más representativos.

Intercultural Approaches to Cities and Spaces in Literature, Film, and New Media: a review of new work by Manzanas and Benito and Lopez-Varela and Net

Intercultural Approaches to Cities and Spaces in Literature, Film, and New Media: a review of new work by Manzanas and Benito and Lopez-Varela and Net

CSR Policies: Effects on Labour Productivity in Spanish Micro and Small Manufacturing Companies

This paper analyses empirical evidence of efforts to enable Spanish micro and small manufacturing companies to boost their labour productivity rates through the development of the main pillars of their corporate social responsibility (CSR) policies. This study aims to develop new approaches and sensibilities towards work from an ethical, values (virtues) and CSR perspective, showing how internal dimensions of CSR, such those related to relationships with employees and responsibility in processes and product quality, can improve labour performance and labour efficiency, thereby contributing to a better society. The results of a sample of 929 small businesses indicate that the social responsibility policies that most contributed to a short-term increase in labour productivity are those related to internal aspects of the company, in particular its involvement in the quality of processes and products, promotion of innovation and employee care. However, the impact on labour productivity of CSR policies related to external factors, such as relationship with stakeholders and environmental concern, could not be empirically proven in this paper.

A low-area reference-free power supply sensor

Power supply unpredictable uctuations jeopardize the functioning of several types of current electronic systems. This work presents a power supply sensor based on a voltage divider followed by buffer-comparator cells employing just MOSFET transistors and provides a digital output. The divider outputs are designed to change more slowly than the thresholds of the comparators, in this way the sensor is able to detect voltage droops. The sensor is implemented in a 65nm technology node occupying an area of 2700?m2 and displaying a power consumption of 50?W. It is designed to work with no voltage reference and with no clock and aiming to obtain a fast response.

Oxford-París. Del viaje formativo al viaje de la visión interior en Pablo Palazuelo

Durante de la fecunda obra de Palazuelo, existen sendos viajes cruciales tanto para su formación como para la evolución de su obra. In 1933, continuó sus estudios arquitectónicos en la School of Arts and Crafts of the city of Oxford, donde el pintor español recibió la formación que le permitió adquirir no sólo nuevas herramientas gráficas, sino también un método proyectual que implementó a lo largo de su producción. El segundo viaje iniciático se produjo en Paría, donde aplicó las enseñanzas aprendidas en su incipiente carrera artística. Para ilustrar ambos momentos, el presente texto desvela archivos gráficos inéditos procedentes de los fondos de la Fundación Palazuelo que estuve catalogando. During Palazuelo successful career, two trips were crucial turning points for both his formation and the evolution of his work. In 1933, he continued his architectural studies at the School of Arts and Crafts of the city of Oxford, were this Spanish painter received an education that allowed him not only endow new graphical tools, but also a procedural method he implemented throughout his production. The second initiation voyage took place in Paris, where he applied the lessons learned in his fledgling artistic career. To illustrate both moments this text unveils unpublished graphic files from Palazuelo Foundation that I catalogued.

El rigor de la geometría reguladora: aplicaciones de la transgeometría de Pablo Palazuelo en el Dibujo Arquitectónico

En la presente comunicación se trata de enfocar esta exactitud geométrica requerida para la correcta ejecución del dibujo arquitectónico, estableciendo un análisis comparativo con la minuciosa metodología desarrollada por Pablo Palazuelo. De esta manera, se tratará también de determinar su posible aplicación docente en nuestras asignaturas gráficas, Dibujo Arquitectónico y su hermana Laboratorio de Informática Gráfica.

Evaluación de ruido ambiental en las zonas de uso residencial ubicadas en la zona de influencia de la Avenida San Pablo (Barrio de la Estación, Coslada)

El presente documento analiza y evalúa el ruido ambiental existente en las zonas de uso residencial ubicadas en el Barrio de “La Estación”, en el entorno de la Avenida San Pablo, pertenecientes al municipio de Coslada (Madrid). La zona que contempla el proyecto es muy completa, ya que en ella están presentes diferentes tipos de ruido medioambiental (tráfico ferroviario, tráfico rodado, tráfico aeroportuario, ruido industrial de instalaciones, ruido de actividades, etc), donde las fuentes de ruido pueden manifestarse aisladas o en diversas combinaciones. Para evaluar el ruido total existente, se analiza por un lado el ruido residual de la zona de estudio, y por otro el ruido específico e intermitente asociado a sucesos aislados, como son el ruido de aviones y el ruido de trenes, donde se estudia individualmente la existencia de componentes de tonalidad, baja frecuencia e impulsividad. Una vez obtenidos los niveles de ruido total y ruido residual en la zona objeto de estudio, el índice Nivel de presión sonora promedio LPm de las muestras analizadas, estima correctamente los niveles obtenidos en el muestreo de larga duración. En las medidas realizadas se detecta la existencia de componentes de tonalidad y baja frecuencia en los pasos de aviones y trenes registrados. Se calculan los niveles sonoros existentes en la zona de estudio. Para ello se realiza una evaluación de los índices de ruido Ld, para el periodo día, y Le, para el periodo tarde, utilizando como herramienta de cálculo el programa IMMI 6.3.1e. Se realiza la validación del mapa de niveles sonoros obtenido con el IMMI 6.3.1e. Para ello se hace una comparación entre los niveles calculados con el modelo, y los niveles medidos “in situ” en los puntos de muestreo. Por último se obtiene la incertidumbre en cada una de las medidas ejecutadas en una segunda campaña “in situ”, correspondientes a niveles de presión sonora continuos equivalentes ponderado A (LAeq,5min), teniendo en cuenta las posibles desviaciones ocasionadas por el equipo de medida, condiciones meteorológicas, procedimiento de realización del ensayo, etc. ABSTRACT. The present document analyzes and evaluates the environmental noise in the residential areas located at “La Estación” district, near the San Pablo Avenue, in the Coslada municipality (Madrid). The area considered in this project is very complete, once it covers different types of environmental noise (railway traffic, vehicular traffic, airport traffic, industrial noise of building systems, activities noise, etc), where noise sources may appear isolated or under several combinations. In order to evaluate the existing total noise, on one hand it is analyzed the residual noise in the study area, and on the other hand it is analyzed the specific and intermittent noise associated to isolated occurrences, such as the noise of the aircrafts and the noise of the trains, where the existence of components of tonality, low frequency and impulsiveness is studied individually. After obtaining the levels of total noise and residual noise in the target study area, the sound pressure level average index (LPm) of the analyzed samples estimates correctly the levels obtained in the sampling of long duration. On what concerns the measures carried out, it is detected the existence of components of tonality and low frequency in the registered aircrafts and trains passage. The sound levels of the study area are calculated. For that it is made a valuation of the Ld noise ratio, concerning the day period, and Le, concerning the afternoon period. The calculation tool used is the IMMI 6.3.1e programme. The validation of the map of sound levels obtained with the IMMI 6.3.1e is made. In order to get this validation, it is made a comparison between the levels calculated with the model and the levels measured “in situ” in the sampling points. Finally the uncertainty is obtained in each one of the measurements made in a second sampling “in situ”, correspondent to equivalent A-weighted continuous sound pressure level (LAeq,5 min), having in mind the possible deviations caused by the equipment of measure, meteorological conditions, essay’s execution procedures, etc.

Análisis de la geometría de Pablo Palazuelo desde la visión del arquitecto

Esta investigación indaga sobre la relación entre el método geométrico empleado por Pablo Palazuelo y el proceso del proyecto arquitectónico. La elección de este pintor y escultor madrileño como hilo conductor de esta tesis no es fortuita, puesto que la arquitectura desempeña una influencia esencial sobre su obra. Un influjo que le llega en parte a través de su formación académica, dado que cursó estudios de arquitectura en la School of Arts and Crafts de la ciudad de Oxford (1933-1936). Así mismo diseñó propuestas estrechamente vinculadas a un lugar construido, con el consiguiente condicionante de las trazas del mismo. La hipótesis de trabajo formulada a partir de textos elaborados por autores como Víctor Nieto Alcaide y Juan Daniel Fullaondo sugería una interconexión con la arquitectura orgánica. Como comprobación del grado de profundidad en otros análisis publicados, se han seleccionado los textos que indagan en el proceso que el artista desarrollaba durante la producción de su obra, y se adentran en cuestiones estructurales que trascienden el ámbito formal. Siguiendo esta pauta, además de una acotación temporal, se han escogido los realizados por Santiago Amón, Carme Bonell, Valerio Bozal, Manuel J. Borja-Villel, Francisco Calvo Serraller, Claude Esteban, Julián Gállego, Teresa Grandas, Max Hölzer, George Limbour, Kevin Power y Carlos Rodríguez-Spiteri. A estos autores se suman las fuentes orales consultadas dentro de un entorno intrínsecamente próximo a sus realizaciones, procedentes de Pere Casanovas y Soledad Lorenzo. Además de personas que en diferentes etapas de su vida coincidieron por distintos motivos con sus realizaciones, como son Ramón Ayerza, Mariano Bayón, José Antonio Corrales, Luis Gordillo, Rafael Moneo, José Rodríguez-Spiteri y Antonio Tornero. A partir del acceso obtenido a los escritos, libros, bocetos y abundante obra gráfica y escultórica que atesora la Fundación del pintor, se ha podido elaborar un andamiaje tanto teórico como geométrico que ha servido de base para confrontar estas premisas. Esta empresa se ha estructurado en una narración que, además de los estudios precedentes citados, comienza con los cimientos del pensamiento de Palazuelo. Elaborada a partir de sus escritos, donde defendía un sincretismo que concilia las visiones de las culturas occidental y oriental. En los siguientes apartados, se han analizado las principales obras gráficas y escultóricas del autor haciendo un especial hincapié en el método productivo. Una gestación que se resiste a una mera enumeración cronológica, por lo que la clasificación que se propone en este trabajo trata de ser lo más fiel posible al espíritu expresado por Palazuelo basado en linajes y coherencias, para desvelar las herramientas empleadas y poder compararlas con el proceso del proyectual. Este recorrido se completa con una última sección se reúnen por primera vez las dieciséis obras y los dieciséis proyectos más representativos que ilustran la aproximación más directa que obró Palazuelo entre sus investigaciones geométricas y un locus determinado. Durante casi cuatro años se desarrolló un inventariado y catalogación pormenorizada de la documentación y piezas sobre papel, lienzo y metal realizadas por Palazuelo. Esta indagación saca a la luz un conjunto constituido por casi cuatro mil obras, en su mayoría inéditas, que constituyen el archivo de la citada institución. En definitiva, esta investigación construye un tejido gráfico y geométrico referido a uno de los artistas españoles más importantes del siglo XX, entreverado por su pensamiento teórico y realizaciones en dibujos, maquetas, esculturas y propuestas arquitectónicas. Las cuales permiten establecer los acuerdos y desacuerdos con el proceso de la arquitectura para proponer una nueva aproximación geométrica interdisciplinar. ABSTRACT This research investigates the relationship between the geometric method used by Palazuelo and the architectural design’s process. Choosing this Spanish painter and sculptor as thread of this thesis is not fortuitous, since the architecture has an essential influence on his work. An influx that arrives in part through his academic training, as he was an architecture student at the School of Arts and Crafts of the city of Oxford (1933-1936). Furthermore his proposals designed closely linked to a built place, therefore conditioned by its traces. The working hypothesis formulated from texts written by authors like Victor Nieto Alcaide and Juan Daniel Fullaondo suggested an interconnection with organic architecture. As a check on the degree of depth in other published reviews, articles that explore the process that the artist developed during the production of his work, and penetrate into structural issues beyond formal domain have been selected. Following this pattern, along with a temporal dimension, assays by Santiago Amón, Carme Bonell, Valerio Bozal, Manuel J. Borja-Villel, Francisco Calvo Serraller, Claude Esteban, Julián Gállego, Teresa Grandas, Max Hölzer, George Limbour, Kevin Power and Carlos Rodriguez-Spiteri have been selected. Oral sources within an inherently environment close to his achievements, as Pere Casanovas and Soledad Lorenzo, are also added. In addition to people coincided with his accomplishments, such as Ramón Ayerza, Mariano Bayón, José Antonio Corrales, Luis Gordillo, Rafael Moneo, José Rodríguez-Spiteri and Antonio Tornero. From obtained access to the writings, books, sketches and abundant graphic and sculptural work that holds the Foundation painter, it has been able to develop a theoretical and geometric framework that have served as the basis for confronting these premises. This dissertation has been structured in a narrative that ⎯in addition to the previously mentioned studies⎯, begins with the foundations of Palazuelo thought. A structure built from his writings, where he defended a syncretism that reconciles the views of Western and Eastern cultures. In the following sections, his main graphic and sculptural works have been analyzed with particular emphasis on the productive method. A process that resists mere chronological enumeration, so the classification proposed in this investigation tries to be as faithful as possible to the spirit expressed by Palazuelo, based on bloodlines and coherences, to uncover the tools he used and to compare them with the architectural design process. This tour is completed with a final chapter that gathers the sixteen proposals and sixteen works most representative projects that illustrate the more direct approach that Palazuelo worked between geometric investigations and a given locus. For nearly four years, a detailed inventory and cataloguing of documents and works on paper, canvas and metal made by Palazuelo was developed. This research brings to light a set consisting of nearly four thousand works, mostly unpublished, that constitute the current archive of the aforementioned institution. Ultimately, this research builds a graph and geometric fabric referred to one of the most important Spanish artists of the twentieth century, interspersed by his theoretical thinking and achievements in drawings, models, sculptures and architectural proposals. Which allow establishing agreements and disagreements with the process of architecture to propose a new geometric interdisciplinary approach.