Proyecto de mejora del espacio público del A.H. José Carlos Mariátegui : Distrito de Pueblo Nuevo, provincia de Chincha, región de Ica

Proyecto de mejora del espacio público del A.H. José Carlos Mariátegui : Distrito de Pueblo Nuevo, provincia de Chincha, región de Ica

Functionalism and Caprice in Stonecutting. The Case of the Nativity Chapel in Burgos Cathedral

Starting from the inaugural text of Philibert de L'Orme, stereotomic treatises and manuscripts are subject to the opposing forces of reason and fancy. The Nativity Chapel in Burgos Cathedral provides an outstanding case study on this subject. It was built in 1571-1582 by Martín de Bérriz and Martín de la Haya, using an oval vault resting on trumpet squinches to span a rectangular bay. Bed joints and rib axes are not planar curves, as usual in oval vaults. This warping is not capricious; we shall argue that it is the outcome of a systematic tracing method. As a result of this process, the slope of the bed joints increases slightly in the first courses, but stays fairly constant after the third course; this solution prevents the upper courses from slipping. Thus, in the Nativity Chapel of Burgos Cathedral, the constraints of masonry construction fostered a singular solution verging on capriccio. It is also worthwhile to remark that the warping of the joints is not easily appreciable to the eye and that the tracing process does not seem to start from a previous conception of the resulting form. All this suggests that we should be quite careful when talking about the whimsical character of Late Gothic and Early Renaissance; in some occasions, apparent caprice is the offspring of practical thinking.

Thermodynamics of zinc insertion in CuGaS2:Ti, used as a modulator agent in an intermediate-band photovoltaic material

An intermediate-bandphotovoltaicmaterial, which has an isolated metallic band located between the top of the valence band and bottom of the conduction band of some semiconductors, has been proposed as third generation solar cell to be used in photovoltaic applications. Density functional theory calculations of Zn in CuGaS2:Ti have previously shown that, the intermediate-band position can be modulated in proportion of Zn insertion in such a way that increasing Zn concentration can lead to aband-gap reduction, and an adjustment of the intermediate-band position. This could be interesting in the formation of an intermediate-bandmaterial, that has the maximum efficiency theoretically predicted for the intermediate-band solar cell. In this work, the energetics of several reaction schemes that could lead to the decomposition of the modulated intermediate-bandphotovoltaicmaterial, CuGaS2:Ti:Zn, is studied in order to assess the thermodynamic stability of this material. Calculations of the total free energy and disorder entropy have been taken into account, to get the reaction energy and free energy of the compound decomposition, which is found to be thermodynamically favorable

Intermediate band materials for more efficient solar energy use: quantum modelling and experimental realizations

The intermediate band (IB) solar cell (Fig. 1) has been proposed [1] to increase photovoltaic efficiency by a factor above 1.5, based on the absorption of two sub-bandgap photons to promote an electron across the bandgap. To realize this principle, that can be applied also to obtain efficient photocatalysis with sunlight, we proposed in recent years several materials where a metal or heavy element, substituting for an electropositive atom in a known semiconductor that has an appropriate band gap width (around 2 eV), forms inside the gap the partially filled levels needed for this aim

Methodology for the metric restoration of the historical cartography applied to Francisco Coello's cartografic series of the Royal Site of Aranjuez

Hojas Kilométricas (Kilometric Sheets). Specifically, the study focuses on those sheets referring to the city centre and surrounding area of the Royal Site of Aranjuez, a town in the south of the Province of Madrid. The aim of this study is to restore the actual size and measurements of scanned images of the Hojas Kilométricas. This would allow us, among other things, to reestablish both the format and scale of the original plans. To achieve this goal it is necessary to rectify and then georeference these images, i.e. assign them a geographic reference system. This procedure is essential in the overlaying and comparison of the Hojas Kilométricas of the Royal Site with other historical cartography as well as other sources related to the same area from different time periods. Subsequent research would allow us, for example, to reconstruct the time-evolution of the urban area, to spot new construction and to pinpoint the locations of any altered or missing buildings or architectural features. In addition, this would allow us to develop and integrate databases for GIS models applicable to the management of our cultural heritage.

The logarithmic spiral, autoisoptic curve

In the Line of Investigation that in the department of “Technical Drawing” in the School of Agriculture Engineering of Madrid, we carry out on the study of The Technical Curves and his singularities, we demonstrate an interesting property of the Logarithmic Spiral. The demonstrated property consists of which the logarithmic spiral is a autoisoptic curve, that is to say that if from a point P anyone of the spiral tangent straight lines draw up to the previous arc, these form a constant angle α. This demonstration is novel and in addition we get to contribute a method to calculate the angle α given the equation of the spiral.

Airborne ultrasonic vortex generation using flexible ferroelectrets

Cellular ferroelectrets exhibit interesting electromechanical- acoustical characteristics. Their recent appearance and remarkable properties open up new possibilities for the design and development of ultrasonic transducers. In particular, the feasibility of fabricating ultrasonic vortex generators using ferroelectret films is demonstrated in this work. To this end, a transducer prototype was built by gluing the material onto a tangential-helical surface (outer diameter: 40 mm, pitch: 3.45 mm). Experimental results agree well with the theoretical estimation of the pressure and phase of the acoustic field in the near field and far field, which corroborates the potential of ferroelectrets to customize special acoustic fields. Furthermore, the proposed fabrication procedure is inexpensive and represents a new alternative for exploring and analyzing the special characteristics of acoustical helical wavefronts

PDR with a foot-mounted IMU and ramp detection

The localization of persons in indoor environments is nowadays an open problem. There are partial solutions based on the deployment of a network of sensors (Local Positioning Systems or LPS). Other solutions only require the installation of an inertial sensor on the person’s body (Pedestrian Dead-Reckoning or PDR). PDR solutions integrate the signals coming from an Inertial Measurement Unit (IMU), which usually contains 3 accelerometers and 3 gyroscopes. The main problem of PDR is the accumulation of positioning errors due to the drift caused by the noise in the sensors. This paper presents a PDR solution that incorporates a drift correction method based on detecting the access ramps usually found in buildings. The ramp correction method is implemented over a PDR framework that uses an Inertial Navigation algorithm (INS) and an IMU attached to the person’s foot. Unlike other approaches that use external sensors to correct the drift error, we only use one IMU on the foot. To detect a ramp, the slope of the terrain on which the user is walking, and the change in height sensed when moving forward, are estimated from the IMU. After detection, the ramp is checked for association with one of the existing in a database. For each associated ramp, a position correction is fed into the Kalman Filter in order to refine the INS-PDR solution. Drift-free localization is achieved with positioning errors below 2 meters for 1,000-meter-long routes in a building with a few ramps.

Centro Cívico La Vaguada. Madrid

Se describe el concurso de ideas para el Centro Cívico La Vaguada. Entre otras cosas se indica la obtención de la quinta mención por el proyecto liderado por Julio Cano Lasso encontrándose entre los arquitectos participantes José Carlos de San Antonio Gómez.

José Moreno Villa y la Revista Arquitectura

Al poco de cumplirse 70 años del primer número de la revista se rinde homenaje al que fuera uno de sus principales artífices, José Moreno Villa

La influencia de Stijl y de las vanguardias literarias en los dibujos axonométricos de Mercadal

El artículo describe como el uso de la axonométrica, promovido por los arquitectos de las vanguardias europeas de los años 20 se generaliza en todo el continente llegando a convertirse en una moda. España no fué una excepción. Según se introduce la arquitectura de vanguardia van desapareciendo los dibujos artísticos y aumentan las representaciones técnicas con planos y perspectivas axonométricas.

Rinascimento. Da Brunelleschi a Michelangelo. La rappresentazione dell' Arquitettura

Reseña del libro "Rinascimento. Da Brunelleschi a Michelangelo. La rappresentazione dell' Arquitettura" , catálogo de la exposición sobre la Representación de la Arquitectura celebrada en Venecia en 1994

La influencia del musical americano en Gutiérrez Soto

El cine ha sido pionero del gusto artístico, de la moda y, en ocasiones, de nuevas imágenes arquitectónicas. Piénsese, por ejemplo, en la ciudad futurista de Fritz Lang para Metrópolis (1926), o en la arquitectura aerodinámica del film Things to Come (1936). Sin embargo, la traslación de esas imágenes al mundo real no siempre fue inmediata. Una de las pocas excepciones son las películas musicales americanas de los años treinta, que dejaron su huella en la arquitectura d los dancing o salas de fiesta. Tal es el caso del Casablanca Dancing-Salón de té, una obra de Gutiérrez Soto hoy desaparecida.

GIS analysis of the accuracy of Tomas Lopez's historical cartography in the Canary Islands (1742 - 1746)

The accuracy of Tomás López´s historical cartography of the Canary Islands included in the “Atlas Particular” of the Kingdoms of Spain, Portugal and Adjacent Islands” is analyzed. For this purpose, we propose a methodology based on Geographic Information Systems (GIS), a comparison of digitized historical cartography population centres with current ones. This study shows that the lineal error value is small for the smaller islands: Lanzarote, El Hierro, La Palma and La Gomera. In the large islands of Tenerife, Fuerteventura and Gran Canaria, the error is smaller in central zones but increases towards the coast. This indicates that Tomás López began his cartography starting from central island zones, accumulating errors due to lack of geodetic references as he moved toward the coast.

Geometría y Arquitectura en las iglesias cortesanas de Madrid en el siglo XVIII

Con la llegada al trono español de Felipe V, una pléyade de arquitectos y artistas italianos y franceses fueron llamados a Madrid por la nueva dinastía borbónica para cambiar el gusto artístico de un país de cultura y costumbres ajenas. De las obras que estos arquitectos dejaron en España, nos hemos centrado en la arquitectura religiosa por ser más evidente esta influencia. Hemos analizado dos iglesias madrileñas: la de San Ignacio y la Basílica Pontificia de San Miguel (antes iglesia de los santos Justo y Pastor).