6 resultados para Jade.
em Universidad Politécnica de Madrid
Resumo:
La unión de distintos sistemas software constituye un elemento principal de las nuevas Tecnologías de la Información y la Comunicación. La integración de entornos virtuales tridimensionales con agentes software inteligentes es el objetivo que persigue este trabajo de investigación. Para llevar a cabo esta integración se parte de la creación de un agente virtual, un personaje que es controlado por una mente desarrollada siguiendo un enfoque basado en agentes software. Se busca así dotar al sistema de cierto nivel de inteligencia, tomando como referencia el funcionamiento del cerebro humano. Lo que se consigue es que el agente capte los estímulos del entorno, los procese y genere comportamientos, tanto reactivos como deliberativos, que son ejecutados por el personaje. Los resultados obtenidos resaltan el dinamismo del sistema, a la vez que animan a seguir investigando en este campo lleno de aplicaciones directas y reales sobre el mundo. En conclusión, esta investigación busca y consigue un nuevo paso en el progreso de las nuevas tecnologías mediante una integración real de distintos sistemas software. ---ABSTRACT---The union of different software systems is a major element of Information and Communications Technology. The aim of this research is the integration of 3D virtual environments and intelligent software agents. This integration is based on the development of a virtual agent, a character that is controlled by a mind developed following a software agent approach. It is sought to provide the system with some intelligence level, taking the human brain function as a reference point. The consequence is that the agent captures environmental stimuli, processes them and creates reactive and deliberative behaviours that can be executed by the avatar. The findings emphasize the dynamism of the system as well as they encourage to research more in this field that has a lot of direct and real-life applications on the world. In conclusion, this research seeks and takes a new step in the progress of new technologies through a real integration of different software systems.
Resumo:
In recent years, Independent Components Analysis (ICA) has proven itself to be a powerful signal-processing technique for solving the Blind-Source Separation (BSS) problems in different scientific domains. In the present work, an application of ICA for processing NIR hyperspectral images to detect traces of peanut in wheat flour is presented. Processing was performed without a priori knowledge of the chemical composition of the two food materials. The aim was to extract the source signals of the different chemical components from the initial data set and to use them in order to determine the distribution of peanut traces in the hyperspectral images. To determine the optimal number of independent component to be extracted, the Random ICA by blocks method was used. This method is based on the repeated calculation of several models using an increasing number of independent components after randomly segmenting the matrix data into two blocks and then calculating the correlations between the signals extracted from the two blocks. The extracted ICA signals were interpreted and their ability to classify peanut and wheat flour was studied. Finally, all the extracted ICs were used to construct a single synthetic signal that could be used directly with the hyperspectral images to enhance the contrast between the peanut and the wheat flours in a real multi-use industrial environment. Furthermore, feature extraction methods (connected components labelling algorithm followed by flood fill method to extract object contours) were applied in order to target the spatial location of the presence of peanut traces. A good visualization of the distributions of peanut traces was thus obtained
Resumo:
The magnetoencephalogram (MEG) is contaminated with undesired signals, which are called artifacts. Some of the most important ones are the cardiac and the ocular artifacts (CA and OA, respectively), and the power line noise (PLN). Blind source separation (BSS) has been used to reduce the influence of the artifacts in the data. There is a plethora of BSS-based artifact removal approaches, but few comparative analyses. In this study, MEG background activity from 26 subjects was processed with five widespread BSS (AMUSE, SOBI, JADE, extended Infomax, and FastICA) and one constrained BSS (cBSS) techniques. Then, the ability of several combinations of BSS algorithm, epoch length, and artifact detection metric to automatically reduce the CA, OA, and PLN were quantified with objective criteria. The results pinpointed to cBSS as a very suitable approach to remove the CA. Additionally, a combination of AMUSE or SOBI and artifact detection metrics based on entropy or power criteria decreased the OA. Finally, the PLN was reduced by means of a spectral metric. These findings confirm the utility of BSS to help in the artifact removal for MEG background activity.
Resumo:
El audio multicanal ha avanzado a pasos agigantados en los últimos años, y no solo en las técnicas de reproducción, sino que en las de capitación también. Por eso en este proyecto se encuentran ambas cosas: un array microfónico, EigenMike32 de MH Acoustics, y un sistema de reproducción con tecnología Wave Field Synthesis, instalado Iosono en la Jade Höchscule Oldenburg. Para enlazar estos dos puntos de la cadena de audio se proponen dos tipos distintos de codificación: la reproducción de la toma horizontal del EigenMike32; y el 3er orden de Ambisonics (High Order Ambisonics, HOA), una técnica de codificación basada en Armónicos Esféricos mediante la cual se simula el campo acústico en vez de simular las distintas fuentes. Ambas se desarrollaron en el entorno Matlab y apoyadas por la colección de scripts de Isophonics llamada Spatial Audio Matlab Toolbox. Para probar éstas se llevaron a cabo una serie de test en los que se las comparó con las grabaciones realizadas a la vez con un Dummy Head, a la que se supone el método más aproximado a nuestro modo de escucha. Estas pruebas incluían otras grabaciones hechas con un Doble MS de Schoeps que se explican en el proyecto “Sally”. La forma de realizar éstas fue, una batería de 4 audios repetida 4 veces para cada una de las situaciones garbadas (una conversación, una clase, una calle y un comedor universitario). Los resultados fueron inesperados, ya que la codificación del tercer orden de HOA quedo por debajo de la valoración Buena, posiblemente debido a la introducción de material hecho para un array tridimensional dentro de uno de 2 dimensiones. Por el otro lado, la codificación que consistía en extraer los micrófonos del plano horizontal se mantuvo en el nivel de Buena en todas las situaciones. Se concluye que HOA debe seguir siendo probado con mayores conocimientos sobre Armónicos Esféricos; mientras que el otro codificador, mucho más sencillo, puede ser usado para situaciones sin mucha complejidad en cuanto a espacialidad. In the last years the multichannel audio has increased in leaps and bounds and not only in the playback techniques, but also in the recording ones. That is the reason of both things being in this project: a microphone array, EigenMike32 from MH Acoustics; and a playback system with Wave Field Synthesis technology, installed by Iosono in Jade Höchscule Oldenburg. To link these two points of the audio chain, 2 different kinds of codification are proposed: the reproduction of the EigenMike32´s horizontal take, and the Ambisonics´ third order (High Order Ambisonics, HOA), a codification technique based in Spherical Harmonics through which the acoustic field is simulated instead of the different sound sources. Both have been developed inside Matlab´s environment and supported by the Isophonics´ scripts collection called Spatial Audio Matlab Toolbox. To test these, a serial of tests were made in which they were compared with recordings made at the time by a Dummy Head, which is supposed to be the closest method to our hearing way. These tests included other recording and codifications made by a Double MS (DMS) from Schoeps which are explained in the project named “3D audio rendering through Ambisonics techniques: from multi-microphone recordings (DMS Schoeps) to a WFS system, through Matlab”. The way to perform the tests was, a collection made of 4 audios repeated 4 times for each recorded situation (a chat, a class, a street and college canteen or Mensa). The results were unexpected, because the HOA´s third order stood under the Well valuation, possibly caused by introducing material made for a tridimensional array inside one made only by 2 dimensions. On the other hand, the codification that consisted of extracting the horizontal plane microphones kept the Well valuation in all the situations. It is concluded that HOA should keep being tested with larger knowledge about Spherical Harmonics; while the other coder, quite simpler, can be used for situations without a lot of complexity with regards to spatiality.
Resumo:
This paper presents a testing methodology to apply Behaviour Driven Development (BDD) techniques while developing Multi-Agent Systems (MAS), so called BEhavioural Agent Simple Testing (BEAST) methodology. It is supported by the developed open source framework (BEAST Tool) which automatically generates test cases skeletons from BDD scenarios specifications. The developed framework allows testing MASs based on JADE or JADEX platforms and offers a set of configurable Mock Agents which allow the execution of tests while the system is under development. BEAST tool has been validated in the development of a MAS for fault diagnosis in FTTH (Fiber To The Home) networks.
Estudio preliminar acerca del uso de protocolos y actos comunicativos FIPA en el sistema COMPUTAPLEX
Resumo:
Este trabajo corresponde con la implementación de componentes software dentro de la Plataforma COMPUTAPLEX, la cual tiene como objetivo facilitar a los investigadores la realización de tareas del proceso experimental de ingeniería de software. Uno de los aportes a esta plataforma tecnológica corresponde con el desarrolló de los componentes necesarios para la recuperación de datos experimentales disponibles en diversas fuentes de datos, para ello se hizo uso de un mecanismo capaz de unificar la extracción de información de MySQL, ficheros excel y ficheros SPSS. Con ello diferentes grupos de investigación asociados pueden compartir y tener acceso a repositorios experimentales que se mantienen tanto de manera local como externa. Por otra parte, se ha realizado un estudio de la tecnología de agentes en la que se describe sus definiciones, lenguajes de comunicación, especificación FIPA, JADE como implementación FIPA y parser XML. Además para este trabajo se ha definido e implementado una ontología de comunicación entre agentes, la misma que fue diseñada en la herramienta Protégé. En lo que se refiere al desarrollo de componentes se hizo uso de una amplía variedad de tecnologías que incluye lenguaje de programación Java, framework JADE para el desarrollo de agentes, librería JENA para manejo de ontologías, librería SAXParser para lectura de archivos XML y patrón de diseño Factory. Finalmente se describe la metodología de trabajo utilizada en el proyecto, la cual por medio de la realización de varios ciclos iterativos permitió obtener prototipos que poco a poco fueron cubriendo las necesidades del producto software.----ABSTRACT---- This work relates to the implementation of software components within the platform Computaplex, which aims to enable researchers to conduct experimental software engineering process tasks. One of the contributions to this platform technology corresponds to the development of components which are necessary for the recovery of experimental data available in different data sources, to archive this goal a mechanism able to unify the extraction of information from MySQL, Excel and SPSS files was made. Therefore, associated research groups can share and access experimental repositories that remain both locally and externally. Moreover, it has been conducted a study of agent technology in its definition is described, languages communication, FIPA, JADE and FIPA implementation and XML parser. In addition to this work, it has been defined and implemented an ontology for communication between agents, the same as was designed in the Protégé tool. In what refers to the development of components, a wide range of technologies have been made which includes Java programming language, framework JADE for agent development, JENA library for handling ontologies, SAXParser for reading XML files and Factory design pattern. Finally, describing the work methodology used in this project, which through the implementation of several iterative cycles allowed to obtain prototypes were gradually meeting the needs of the software product.