Extreme pointer years in tree-ring records of central Spain as evidence of climatic events and the eruption of the Huaynaputina Volcano (Peru, 1600 AD)

The study of pointer years of numerous tree-ring chronologies of the central Iberian Peninsula (Sierra de Guadarrama) could provide complementary information about climate variability over the last 405 yr. In total, 64 pointer years have been identified: 30 negative (representing minimum growths) and 34 positive (representing maximum growths), the most significant of these being 1601, 1963 and 1996 for the negative ones, and 1734 and 1737 for the positive ones. Given that summer precipitation was found to be the most limiting factor for the growth of Pinus in the Sierra de Guadarrama in the second half of the 20th century, it is also an explanatory factor in almost 50% of the extreme growths. Furthermore, these pointer years and intervals are not evenly distributed throughout time. Both in the first half of the 17th and in the second half of 20th, they were more frequent and more extreme and these periods are the most notable for the frequency of negative pointer years in Central Spain. The interval 1600–1602 is of special significance, being one of the most unfavourable for tree growth in the centre of Spain, with 1601 representing the minimum index in the regional chronology. We infer that this special minimum annual increase was the effect of the eruption of Huaynaputina, which occurred in Peru at the beginning of 1600 AD. This is the first time that the effects of this eruption in the tree-ring records of Southern Europe have been demonstrated.

Project based learning activities as a means of adapting conventional curricula to the demands of the 21st century aeronautical engineer: The design and building of the EYEFLY 1.

In this paper we report the process of designing and building the EYEFLY 1, a real UAS platform which has just performed its maiden flight. For the development of this aircraft, 30 groups of students from successive years at the Escuela Universitaria de Ingeniería Técnica Aeronáutica (EUITA) of the Universidad Politécnica de Madrid (UPM) carried out their compulsory End of Degree Project as a coordinated Project Based learning activity. Our conclusions clearly indicate that Project Based Learning activities can provide a valid complement to more conventional, theoretically-based, teaching methods. The combination of both approaches will allow us to maintain traditional but well-tested methods for providing our students with a sound knowledge of fundamental engineering disciplines and, at the same time, to introduce our students to exciting and relevant engineering situations and sceneries where social and business skills, such as communication skills, team-working or decision-taking, can be put into practice.

The Theory and Practice of Restoration in England in the Second Half of the 19th Century: The Work of George E. Street

Análisis de la teoría y práctica de la restauración en Inglaterra en la segunda mitad del siglo XIX, enfocada al trabajo realizado por el arquitecto George Edmund Street, desde el punto de vista de su investigación sobre la historia de la construcción de la arquitectura gótica en Europa.

Changes in the governance system for higher education in Peru to meet the challenges of the 21st century

The competition in markets, the distribution of limited resources based on productivity and performance, and the efficient management of universities are changing the criteria of trust and legitimacy of the educational system in Peru. Universities are perceived more as institutions of the public sector, while the services they offer must rather contribute to the modernization of the emerging society and the knowledge economy. Higher Educations reforms - initiated in the 1980s - have been inspired by the successful university organizations that have managed to change their governance and addressed to transform certain bureaucratic institutions into organizations capable of playing active role in this global competition for resources and best talent. Within this context, Peruvian universities are facing two major challenges: adapting themselves to new global perspectives and being able to develop a better response to society demands, needs and expectations. This article proposes a model of governance system for higher education in Peru that gives a comprehensive solution to these challenges, allowing dealing with the problems of universities for their development and inclusion within the global trends. For this purpose, a holistic and qualitative methodologic approach was developed, considering an integrated method which considered educational reality as a whole, understanding its facts, components and elements that affects its outcomes. It is proposed to define a policy for university education in Peru that permeates society, by changing the planning model from a social reform model to a policy analysis model, where the Peruvian State acts as sole responsible for responding to the demanding society as its legal representative complemented with some external and independent bodies that define the basis of best practice, as it is being done in many university models worldwide.

Technical evolution of 3d modular construction from the nineteenth century to world war II

3D Modular construction is poorly known and scarcely published in technical literature. In spite of that there are an increasing number of manufacturers offering their products in different countries. This method has largely evolved from early examples such as the American Gold Rush prefabrication in the nineteenth century, the Sears precut homes or Voisin´s prototypes for modular homes, to the end of the first half of the twentieth century. In this period a non negligible number of attempts in 3D modular construction have been carried out, ranging from theoretical proposals to several hundred or thousand units produced. Selected examples of modular architecture will be analyses in order to illustrate its technical evolution, concerning materials, structure, transportation and on site assembly. Success and failure factors of the different systems will be discussed. Conclusions about building criteria shown in them and their applicability in current architecture will be drawn.

Unravelling past flash flood activity in a forested mountain catchment of the Spanish Central System

Flash floods represent one of the most common natural hazards in mountain catchments, and are frequent in Mediterranean environments. As a result of the widespread lack of reliable data on past events, the understanding of their spatio-temporal occurrence and their climatic triggers remains rather limited. Here, we present a dendrogeomorphic reconstruction of past flash flood activity in the Arroyo de los Puentes stream (Sierra de Guadarrama, Spanish Central System). We analyze a total of 287 increment cores from 178 disturbed Scots pine trees (Pinus sylvestris L.) which yielded indications on 212 growth disturbances related to past flash flood impact. In combination with local archives, meteorological data, annual forest management records and highly-resolved terrestrial data (i.e., LiDAR data and aerial imagery), the dendrogeomorphic time series allowed dating 25 flash floods over the last three centuries, with a major event leaving an intense geomorphic footprint throughout the catchment in 1936. The analysis of meteorological records suggests that the rainfall thresholds of flash floods vary with the seasonality of events. Dated flash floods in the 20th century were primarily related with synoptic troughs owing to the arrival of air masses from north and west on the Iberian Peninsula during negative indices of the North Atlantic Oscillation. The results of this study contribute considerably to a better understanding of hazards related with hydrogeomorphic processes in central Spain in general and in the Sierra de Guadarrama National Park in particular.

Initializing the DSSAT-Century model: inverse calibration of carbon pools from apparent soil N mineralization

The CENTURY soil organic matter model was adapted for the DSSAT (Decision Support System for Agrotechnology Transfer), modular format in order to better simulate the dynamics of soil organic nutrient processes (Gijsman et al., 2002). The CENTURY model divides the soil organic carbon (SOC) into three hypothetical pools: microbial or active material (SOC1), intermediate (SOC2) and the largely inert and stable material (SOC3) (Jones et al., 2003). At the beginning of the simulation, CENTURY model needs a value of SOC3 per soil layer which can be estimated by the model (based on soil texture and management history) or given as an input. Then, the model assigns about 5% and 95% of the remaining SOC to SOC1 and SOC2, respectively. The model performance when simulating SOC and nitrogen (N) dynamics strongly depends on the initialization process. The common methods (e.g. Basso et al., 2011) to initialize SOC pools deal mostly with carbon (C) mineralization processes and less with N. Dynamics of SOM, SOC, and soil organic N are linked in the CENTURY-DSSAT model through the C/N ratio of decomposing material that determines either mineralization or immobilization of N (Gijsman et al., 2002). The aim of this study was to evaluate an alternative method to initialize the SOC pools in the DSSAT-CENTURY model from apparent soil N mineralization (Napmin) field measurements by using automatic inverse calibration (simulated annealing). The results were compared with the ones obtained by the iterative initialization procedure developed by Basso et al., 2011.

Gestión intelectual de las prácticas comunicativas en arquitectura : S, M, L, XL, el gran evento = The intellectual management of communication practices in architecture : S, M, L, XL, the big event

La tesis doctoral se centra en la posibilidad de entender que la práctica de arquitectura puede encontrar en las prácticas comunicativas un apoyo instrumental, que sobrepasa cualquier simplificación clásica del uso de los medios como una mera aplicación superficial, post-producida o sencillamente promocional. A partir de esta premisa se exponen casos del último cuarto del siglo XX y se detecta que amenazas como el riesgo de la banalización, la posible saturación de la imagen pública o la previsible asociación incorrecta con otros individuos en presentaciones grupales o por temáticas, han podido influir en un crecimiento notable de la adquisición de control, por parte de los arquitectos, en sus oportunidades mediáticas. Esto es, como si la arquitectura hubiera empezado a superar y optimizar algo inevitable, que las fórmulas expositivas y las publicaciones, o más bien del exponer(se) y publicar(se), son herramientas disponibles para activar algún tipo de gestión intelectual de la comunicación e información circulante sobre si misma. Esta práctica de “autoedición” se analiza en un periodo concreto de la trayectoria de OMA -Office for Metropolitan Architecture-, estudio considerado pionero en el uso eficiente, oportunista y personalizado de los medios. Así, la segunda parte de la tesis se ocupa del análisis de su conocida monografía S,M,L,XL (1995), un volumen que contó con gran participación por parte de sus protagonistas durante la edición, y de cuyo proceso de producción apenas se había investigado. Esta publicación señaló un punto de inflexión en su género alterando todo formato y restricciones anteriores, y se ha convertido en un volumen emblemático para la disciplina que ninguna réplica posterior ha podido superar. Aquí se presenta a su vez como el desencadenante de la construcción de un “gran evento” que concluye en la transformación de la identidad de OMA en 10 años, paradójicamente entre el nacimiento de la Fundación Groszstadt y el arranque de la actividad de AMO, dos entidades paralelas clave anexas a OMA. Este planteamiento deviene de cómo la investigación desvela que S,M,L,XL es una pieza más, central pero no independiente, dentro de una suma de acciones e individuos, así como otras publicaciones, exposiciones, eventos y también artículos ensayados y proyectos, en particular Bigness, Generic City, Euralille y los concursos de 1989. Son significativos aspectos como la apertura a una autoría múltiple, encabezada por Rem Koolhaas y el diseñador gráfico Bruce Mau, acompañados en los agradecimientos de la editora Jennifer Sigler y cerca de una centena de nombres, cuyas aportaciones no necesariamente se basan en la construcción de fragmentos del libro. La supresión de ciertos límites permite superar también las tareas inicialmente relevantes en la edición de una publicación. Un objetivo general de la tesis es también la reflexión sobre relaciones anteriormente cuestionadas, como la establecida entre la arquitectura y los mercados o la economía. Tomando como punto de partida la idea de “design intelligence” sugerida por Michael Speaks (2001), se extrae de sus argumentos que lo esencial es el hallazgo de la singularidad o inteligencia propia de cada estudio de arquitectura o diseño. Asimismo se explora si en la construcción de ese tipo de fórmulas magistrales se alojaban también combinaciones de interés y productivas entre asuntos como la eficiencia y la creatividad, o la organización y las ideas. En esta dinámica de relaciones bidireccionales, y en ese presente de exceso de información, se fundamenta la propuesta de una equivalencia más evidenciada entre la “socialización” del trabajo del arquitecto, al compartirlo públicamente e introducir nuevas conversaciones, y la relación inversa a partir del trabajo sobre la “socialización” misma. Como si la consciencia sobre el uso de los medios pudiera ser efectivamente instrumental, y contribuir al desarrollo de la práctica de arquitectura, desde una perspectiva idealmente comprometida e intelectual. ABSTRACT The dissertation argues the possibility to understand that the practice of architecture can find an instrumental support in the practices of communication, overcoming any classical simplification of the use of media, generally reduced to superficial treatments or promotional efforts. Thus some cases of the last decades of the 20th century are presented. Some threats detected, such as the risk of triviality, the saturation of the public image or the foreseeable wrong association among individuals when they are introduced as part of thematic groups, might have encouraged a noticeable increase of command taken by architects when there is chance to intervene in a media environment. In other words, it can be argued that architecture has started to overcome and optimize the inevitable, the fact that exhibition formulas and publications, or simply the practice of (self)exhibition or (self)publication, are tools at our disposal for the activation of any kind of intellectual management of communication and circulating information about itself. This practice of “self-edition” is analyzed in a specific timeframe of OMA’s trajectory, an office that is considered as a ground-breaking actor in the efficient and opportunistic use of media. Then the second part of the thesis dissects their monograph S,M,L,XL (1995), a volume in which its main characters were deeply involved in terms of edition and design, a process barely analyzed up to now. This publication marked a turning point in its own genre, disrupting old formats and traditional restrictions. It became such an emblematic volume for the discipline that none of the following attempts of replica has ever been able to improve this precedent. Here, the book is also presented as the element that triggers the construction of a “big event” that concludes in the transformation of OMA identity in 10 years. Paradoxically, between the birth of the Groszstadt Foundation and the early steps of AMO, both two entities parallel and connected to OMA. This positions emerge from how the research unveils that S,M,L,XL is one more piece, a key one but not an unrelated element, within a sum of actions and individuals, as well as other publications, exhibitions, articles and projects, in particular Bigness, Generic City, Euralille and the competitions of 1989. Among the remarkable innovations of the monograph, there is an outstanding openness to a regime of multiple authorship, headed by Rem Koolhaas and the graphic designer Bruce Mau, who share the acknowledgements page with the editor, Jennifer Sigler, and almost 100 people, not necessarily responsible for specific fragments of the book. In this respect, the dissolution of certain limits made possible that the expected tasks in the edition of a publication could be trespassed. A general goal of the thesis is also to open a debate on typically questioned relations, particularly between architecture and markets or economy. Using the idea of “design intelligence”, outlined by Michael Speaks in 2001, the thesis pulls out its essence, basically the interest in detecting the singularity, or particular intelligence of every office of architecture and design. Then it explores if in the construction of this kind of ingenious formulas one could find interesting and useful combinations among issues like efficiency and creativity, or organization and ideas. This dynamic of bidirectional relations, rescued urgently at this present moment of excess of information, is based on the proposal for a more evident equivalence between the “socialization” of the work in architecture, anytime it is shared in public, and the opposite concept, the work on the proper act of “socialization” itself. As if a new awareness of the capacities of the use of media could turn it into an instrumental force, capable of contributing to the development of the practice of architecture, from an ideally committed and intelectual perspective.

Traditional Building Adaptation to New Requirements: Historic Center of Arequipa, Perú

The traditional buildings in the historic center of the city of Arequipa, Perú, recently declared of human heritage, are of volcanic tuff both in walls and in vaulted roofs on the ground floor. Having been built in the 18th century and up to the beginning of the 20th century, they have suffered many damages from the seismic movements registered in this region. Due to this, many of them have had to be rebuilt. In this presentation, the different changes to adapt the city of Spanish colonial origin to the present tertiary use are analyzed.

Improved ore processing assessed by digital image análisis of the ores: a key to the sustainable development of the Iberian Pyrite Belt

Mining in the Iberian Pyrite Belt (IPB), the biggest VMS metallogenetic province known in the world to date, has to face a deep crisis in spite of the huge reserves still known after ≈5 000 years of production. This is due to several factors, as the difficult processing of complex Cu-Pb-Zn-Ag- Au ores, the exhaustion of the oxidation zone orebodies (the richest for gold, in gossan), the scarce demand for sulphuric acid in the world market, and harder environmental regulations. Of these factors, only the first and the last mentioned can be addressed by local ore geologists. A reactivation of mining can therefore only be achieved by an improved and more efficient ore processing, under the constraint of strict environmental controls. Digital image analysis of the ores, coupled to reflected light microscopy, provides a quantified and reliable mineralogical and textural characterization of the ores. The automation of the procedure for the first time furnishes the process engineers with real-time information, to improve the process and to preclude or control pollution; it can be applied to metallurgical tailings as well. This is shown by some examples of the IPB.

A review of the potential of renewable energy sources for the State of Jammu and Kashmir (India)

The future economic development trajectory for India is likely to result in rapid and accelerated growth in energy demand, with expected shortages. Many of its current policies and strategies are aimed at the improvement and possible maximization of energy production from the renewable sector. It is also clear that while energy-conservation and energy-efficiency can make an important contribution in the national energy strategy, renewable energies will be essential to the solution and are likely to play an increasingly important role for the growth of grid power, providing energy access, reducing consumption of fossil fuels, and helping India pursue its low carbon progressive pathway. However, most of the states in India, like the northernmost State of Jammu and Kashmir (J&K), have experienced an energy crisis over a sustained period of time. As India intends to be one of the emerging powers of the 21st century, it has to embark upon with these pressing issues in a more sustainable manner and accordingly initiate various renewable energy projects within these states. This paper will provide a broad-spectrum view about the energy situation within J&K and will highlight the current policies along with future strategies for the optimal utilization of renewable energy resources.

Reuse of vacant agro-industrial buildings. The case of the public slaughterhouses in Spain

Nearly 3000 slaughterhouses (74% of them public facilities) were built in Spain during the last decades of the nineteenth century and the first half of the twentieth century. The need to comply with new technical requirements and regulations on the hygiene of the meat passed in the 70s and the gradual replacement of public facilities by larger and more modern private slaughterhouses have subsequently led to the closure and abandonment of many of these buildings. Public slaughterhouses generally consisted of several single-storey and open-plan buildings located around a courtyard. Although originally they were preferably located on the outskirts of the towns, many slaughterhouses are now placed inside the built up areas, due to the urban development. The present work aims to contribute to a better understanding of these agro-industrial buildings and to provide ideas for their conservation and reuse. A review on the historical evolution and the architectural features of the public slaughterhouses in Spain is presented and different examples of old vacant slaughterhouses reused to accommodate libraries, offices, community centres, exhibition halls or sports centres, among others, are shown in the paper.

Background and approach to a definition of smart buildings

There is no doubt that there is no possibility of finding a single reference about domotics in the first half of the 20th century. The best known authors and those who have documented this discipline, set its origin in the 1970’s, when the x-10 technology began to be used, but it was not until 1988 when Larousse Encyclopedia decided to include the definition of "Smart Building". Furthermore, even nowadays, there is not a single definition widely accepted, and for that reason, many other expressions, namely "Intelligent Buildings" "Domotics" "Digital Home" or "Home Automation" have appeared to describe the automated buildings and homes. The lack of a clear definition for "Smart Buildings" causes difficulty not only in the development of a common international framework to develop research in this field, but it also causes insecurity in the potential user of these buildings. That is to say, the user does not know what is offered by this kind of buildings, hindering the dissemination of the culture of building automation in society. Thus, the main purpose of this paper is to propose a definition of the expression “Smart Buildings” that satisfactorily describes the meaning of this discipline. To achieve this aim, a thorough review of the origin of the term itself and the historical background before the emergence of the phenomenon of domotics was conducted, followed by a critical discussion of existing definitions of the term "Smart Buildings" and other similar terms. The extent of each definition has been analyzed, inaccuracies have been discarded and commonalities have been compared. Throughout the discussion, definitions that bring the term "Smart Buildings" near to disciplines such as computer science, robotics and also telecommunications have been found. However, there are also many other definitions that emphasize in a more abstract way the role of these new buildings in the society and the future of mankind.

Wind tunnel analysis of the flow topology over complex topographies

El principal objetivo de este trabajo es aportar conocimiento para contestar la pregunta: ¿hasta que punto los ensayos en túnel aerodinámico pueden contribuir a determinar las características que afectan la respuesta dinámica de los aerogeneradores operando en terreno complejo?. Esta pregunta no es nueva, de hecho, el debate en la comunidad científica comenzó en el primer tercio del siglo pasado y aún está intensamente vivo. El método generalmente aceptado para enfrentar el mencionado problema consiste en analizar un caso de estudio determinado en el cual se aplican tanto ensayos a escala real como análisis computacionales y ensayos en túnel aerodinámico. Esto no es ni fácil ni barato. Esta es la razón por la cual desde el experimento de Askervein en 1988, los modelizadores del flujo atmosférico tuvieron que esperar hasta 2007 a que el experimento de Bolund fuese puesto en marcha con un despliegue de medios técnicos equivalentes (teniendo en cuenta la evolución de las tecnologías de sensores y computación). El problema contempla tantos aspectos que ambas experiencias fueron restringidas a condiciones de atmósfera neutra con efectos de Coriolis despreciables con objeto de reducir la complejidad. Este es el contexto en el que se ha desarrollado la presente tesis doctoral. La topología del flujo sobre la isla de Bolund ha sido estudiada mediante la reproducción del experimento de Bolund en los túneles aerodinámicos A9 y ACLA16 del IDR. Dos modelos de la isla de Bolund fueron fabricados a dos escalas, 1:230 y 1:115. El flujo de entrada en el túnel aerodinámico simulando la capa límite sin perturbar correspondía a régimen de transición (transitionally rough regime) y fue usado como situación de referencia. El modelo a escala 1:230 fue ensayado en el túnel A9 para determinar la presión sobre su superficie. La distribución del coeficiente de presión sobre la isla proporcionó una visualización y estimación de una región de desprendimiento sobre el pequeño acantilado situado al frente de la misma. Las medidas de presión instantánea con suficiente grado de resolución temporal pusieron de manifiesto la no estacionariedad en la región de desprendimiento. El modelo a escala 1:115 fue ensayado utilizando hilo caliente de tres componentes y un sistema de velocimetría por imágenes de partículas de dos componentes. El flujo fue caracterizado por el ratio de aceleración, el incremento normalizado de energía cinética turbulenta y los ángulos de inclinación y desviación horizontal. Los resultados a lo largo de la dirección 270°y alturas de 2 m y 5 m presentaron una gran similitud con los resultados a escala real del experimento de Bolund. Los perfiles verticales en las localizaciones de las torres meteorológicas mostraron un acuerdo significativo con los resultados a escala real. El análisis de los esfuerzos de Reynolds y el análisis espectral en las localizaciones de los mástiles meteorológicos presentaron niveles de acuerdo variados en ciertas posiciones, mientras que en otras presentaron claras diferencias. El mapeo horizontal del flujo, para una dirección de viento de 270°, permitió caracterizar el comportamiento de la burbuja intermitente de recirculación sobre el pequeño acantilado existente al frente de la isla así como de la región de relajación y de la capa de cortadura en la región corriente abajo de Bolund. Se realizaron medidas de velocidad con alta resolución espacial en planos perpendiculares a la dirección del flujo sin perturbar. Estas medidas permitieron detectar y caracterizar una estructura de flujo similar a un torbellino longitudinal con regiones con altos gradientes de velocidad y alta intensidad de turbulencia. Esta estructura de flujo es, sin duda, un reto para los modelos computacionales y puede considerarse un factor de riesgo para la operación de los aerogeneradores. Se obtuvieron y analizaron distribuciones espaciales de los esfuerzos de Reynolds mediante 3CHW y PIV. Este tipo de parámetros no constituyen parte de los resultados habituales en los ensayos en túnel sobre topografías y son muy útiles para los modelizadores que utilizan simulación de grades torbellinos (LES). Se proporciona una interpretación de los resultados obtenidos en el túnel aerodinámico en términos de utilidad para los diseñadores de parques eólicos. La evolución y variación de los parámetros del flujo a lo largo de líneas, planos y superficies han permitido identificar como estas propiedades del flujo podrían afectar la localización de los aerogeneradores y a la clasificación de emplazamientos. Los resultados presentados sugieren, bajo ciertas condiciones, la robustez de los ensayos en túnel para estudiar la topología sobre terreno complejo y su comparabilidad con otras técnicas de simulación, especialmente considerando el nivel de acuerdo del conjunto de resultados presentados con los resultados a escala real. De forma adicional, algunos de los parámetros del flujo obtenidos de las medidas en túnel son difícilmente determinables en ensayos a escala real o por medios computacionales, considerado el estado del arte. Este trabajo fue realizado como parte de las actividades subvencionadas por la Comisión Europea como dentro del proyecto FP7-PEOPLE-ITN-2008WAUDIT (Wind Resource Assessment Audit and Standardization) dentro de la FP7 Marie-Curie Initial Training Network y por el Ministerio Español de Economía y Competitividad dentro del proyecto ENE2012-36473, TURCO (Determinación en túnel aerodinámico de la distribución espacial de parámetros estadísticos de la turbulencia atmosférica sobre topografías complejas) del Plan Nacional de Investigación (Subprograma de investigación fundamental no orientada 2012). El informe se ha organizado en siete capítulos y un conjunto de anexos. En el primer capítulo se introduce el problema. En el capítulo dos se describen los medios experimentales utilizados. Seguidamente, en el capítulo tres, se analizan en detalle las condiciones de referencia del principal túnel aerodinámico utilizado en esta investigación. En el capítulo tres se presentan resultados de ensayos de presión superficial sobre un modelo de la isla. Los principales resultados del experimento de Bolund se reproducen en el capítulo cinco. En el capítulo seis se identifican diferentes estructuras del flujo sobre la isla y, finalmente, en el capitulo siete, se recogen las conclusiones y una propuesta de lineas de trabajo futuras. ABSTRACT The main objective of this work is to contribute to answer the question: to which extend can the wind tunnel testing contribute to determine the flow characteristics that affect the dynamic response of wind turbines operating in highly complex terrains?. This question is not new, indeed, the debate in the scientific community was opened in the first third of the past century and it is still intensely alive. The accepted approach to face this problem consists in analysing a given case study where full-scale tests, computational modelling and wind tunnel testing are applied to the same topography. This is neither easy nor cheap. This is is the reason why since the Askervein experience in 1988, the atmospheric flow modellers community had to wait till 2007 when the Bolund experiment was setup with a deployment of technical means equivalent (considering the evolution of the sensor and computing techniques). The problem is so manifold that both experiences were restricted to neutral conditions without Coriolis effects in order to reduce the complexity. This is the framework in which this PhD has been carried out. The flow topology over the Bolund Island has been studied by replicating the Bolund experiment in the IDR A9 and ACLA16 wind tunnels. Two mock-ups of the Bolund island were manufactured at two scales of 1:230 and 1:115. The in-flow in the empty wind tunnel simulating the incoming atmospheric boundary layer was in the transitionally rough regime and used as a reference case. The 1:230 model was tested in the A9 wind tunnel to measure surface pressure. The mapping of the pressure coefficient across the island gave a visualisation and estimation of a detachment region on the top of the escarpment in front of the island. Time resolved instantaneous pressure measurements illustrated the non-steadiness in the detachment region. The 1:115 model was tested using 3C hot-wires(HW) and 2C Particle Image Velocimetry(PIV). Measurements at met masts M3, M6, M7 and M8 and along Line 270°were taken to replicate the result of the Bolund experiment. The flow was characterised by the speed-up ratio, normalised increment of the turbulent kinetic energy, inclination angle and turning angle. Results along line 270°at heights of 2 m and 5 m compared very well with the full-scale results of the Bolund experiment. Vertical profiles at the met masts showed a significant agreement with the full-scale results. The analysis of the Reynolds stresses and the spectral analysis at the met mast locations gave a varied level of agreement at some locations while clear mismatch at others. The horizontal mapping of the flow field, for a 270°wind direction, allowed to characterise the behaviour of the intermittent recirculation bubble on top of the front escarpment followed by a relaxation region and the presence of a shear layer in the lee side of the island. Further detailed velocity measurements were taken at cross-flow planes over the island to study the flow structures on the island. A longitudinal vortex-like structure with high mean velocity gradients and high turbulent kinetic energy was characterised on the escarpment and evolving downstream. This flow structure is a challenge to the numerical models while posing a threat to wind farm designers when siting wind turbines. Spatial distribution of Reynold stresses were presented from 3C HW and PIV measurements. These values are not common results from usual wind tunnel measurements and very useful for modellers using large eddy simulation (LES). An interpretation of the wind tunnel results in terms of usefulness to wind farm designers is given. Evolution and variation of the flow parameters along measurement lines, planes and surfaces indicated how the flow field could affect wind turbine siting. Different flow properties were presented so compare the level of agreement to full-scale results and how this affected when characterising the site wind classes. The results presented suggest, under certain conditions, the robustness of the wind tunnel testing for studying flow topology over complex terrain and its capability to compare to other modelling techniques especially from the level of agreement between the different data sets presented. Additionally, some flow parameters obtained from wind tunnel measurements would have been quite difficult to be measured at full-scale or by computational means considering the state of the art. This work was carried out as a part of the activities supported by the EC as part of the FP7- PEOPLE-ITN-2008 WAUDIT project (Wind Resource Assessment Audit and Standardization) within the FP7 Marie-Curie Initial Training Network and by the Spanish Ministerio de Economía y Competitividad, within the framework of the ENE2012-36473, TURCO project (Determination of the Spatial Distribution of Statistic Parameters of Flow Turbulence over Complex Topographies in Wind Tunnel) belonging to the Spanish National Program of Research (Subprograma de investigación fundamental no orientada 2012). The report is organised in seven chapters and a collection of annexes. In chapter one, the problem is introduced. In chapter two the experimental setup is described. Following, in chapter three, the inflow conditions of the main wind tunnel used in this piece of research are analysed in detail. In chapter three, preliminary pressure tests results on a model of the island are presented. The main results from the Bolund experiment are replicated in chapter five. In chapter six, an identification of specific flow strutures over the island is presented and, finally, in chapter seven, conclusions and lines for future works related to the presented one are included.

The late Miocene macroflora of the La Cerdaña Basin, Eastern Pirenees, Spain. Towards a Synthesis

The fossil plant-bearing beds of the Tortonian (late Miocene) intramontane basin of La Cerdanya (Eastern Pyrenees, Catalonia, Spain) have been investigated for more than a century, and 165 species from 12 outcrops have been described in previous publications. The sediments with rich plant fossil assemblages, which correspond to lacustrine diatomitic deposits, contain large numbers of plant remains, mainly leaf compressions and impressions. These assemblages are well preserved, a consequence of the rapid accumulation of plant remains in the sediments of the basin's ancient lake, and the often close proximity of its shores to wetland and upland vegetation. This paper provides a comprehensive taxonomic and nomenclatural review of the historic and new collections of late Miocene macroflora for the La Cerdanya Basin. Examination of the newer materials allowed emendments to be made to the diagnoses ofAbies saportana, Acer pyrenakum,Alnus occidentalis, Quercus hispanka and Tilia vidali provided by REROLLE for the basin at the end of the 19th century. In addition, 24 species of vascular plants are identified for the basin for the first time, including one horsetail, three conifers, 19 arboreal or bushy dicotyledonous angiosperms, and one monocotyledonous angiosperm. Indeed, this is the first time that Cedrela helkonia (UNGER) KNOBLOCH, Decodon sp„ Hedera cf multinervis KOLAKOVSKII, Mahonia cf pseudosimplex KVACEK & WALTHER, Smilax cf. aspera L. vm.fossilis and Ulmus cf. plurinervia UNGER have been recorded anywhere in the Iberian Peninsula. The La Cerdanya Basin plant assemblages of the late Miocene mainly consisted of conifers and deciduous broadleaved taxa of Arctotertiary origin; evergreen Palaeotropical elements were less well represented. This flora is similar to those recorded at coeval sites in northern Greece, northern Italy and central and eastern France. Within the Iberian Peninsula, the late Miocene macroflora reported for the nearby Seu d'Urgell Basin is the most similar.