Tomas Lopez's Geographic Atlas of Spain (1787) and its Hydrographic Network: GIS analysis of the Reyno de Jaen

Knowledge of the development of hydrographic networks can be useful for a number of research works in hydraulic engineering. We thus, intend to analyse the cartography regarding the first work that systematically encompasses the entire hydrographic network: Tomas Lopez’s Geographic Atlas of Spain (1787). In order to achieve this goal, we will first analyze –by way of the Geographic Information System (GIS) – both the present and referred historical cartographies. In comparing them, we will use the then-existing population centres that correspond to modern ones. The aim is to compare the following research variables in the hydrographic network: former toponyms, length of riverbeds and distance to population centres. The results of this study will show the variation in the riverbeds and the probable change in their denomination.

Caracterización hidráulica, hidrogeológica y patrimonial de las fuentes públicas naturales de la Comunidad de Madrid : propuesta metodológica para su catalogación

Las fuentes como parte de la ingeniería hidráulica, quizás menor, de nuestro país son elementos urbanos, funcionales y de gran interés en el pasado, que poco a poco han ido en decadencia desde la traída de aguas domiciliares. No obstante, entre nosotros, hay magníficas obras de ingeniería muy bien estudiadas y ejecutadas técnicamente pero que a la par representan elementos artísticos de gran interés y representatividad. No en vano en la última ley de Patrimonio Histórico Artístico de la Comunidad de Madrid (ley 3/2013), se requiere su estudio y catalogación a nivel municipal. La técnica de su diseño, es bien conocida desde muy antiguo. Ya los romanos hacían uso de una precisión milimétrica para el cálculo de las pendientes de las conducciones subterráneas que llevaban el agua intacta hasta su destino tras recorrer decenas de kilómetros sin necesidad de energía externa para ello. La calidad de sus aguas, muy ligada al sustrato determinaba en gran medida asentamientos y usos que según su popularidad, podían incluso restringirse a distintos niveles sociales La obra arquitectónica asociada, también cobraba especial relevancia por su singularidad, monumentalidad y aspecto. Muchas son las tendencias arquitectónicas que se dan cita en las fuentes estudiadas, que además, encierran tras de sí gran riqueza de carácter histórico. Esta investigación se centra en el inventariado, catalogación y caracterización de una muestra representativa de fuentes naturales madrileñas (550 fuentes), el estudio pormenorizado de las variables utilizadas en su caracterización, a través de tratamientos inferenciales, y el diseño experimental “ad hoc” de una propuesta metodológica de catalogación y caracterización 360° (desde la captación hasta la salida de aguas por el caño). La investigación finaliza con la puesta en práctica de la metodología diseñada, a través del estudio, catalogación y caracterización de un caso concreto. La presente investigación se centra en la Comunidad de Madrid, pero la propuesta metodológica que se propone como aportación, es extrapolable a cualquier tipo de fuente en cualquier municipio. Con todo ello, se pretende poner en valor estas obras de ingeniería ignorada, y contribuir de alguna forma a su preservación, facilitando su catalogación y difundiendo su existencia. As a minor relevant part of hydraulic engineering, the fountains of our country are urban, functional and of great interest in the past. The relevancy of these fountains has gradually declined since the emergence of general water supply. However, in our environment, there are magnificent works of engineering very well studied and executed, that also represent good examples of art and historical interest. In this way, the Historical and Artistic Heritage Law of the Community of Madrid (Ley 3/2013), requests the councils, their study and categorization. Their technical design is well known since ancient times. Even the Romans were able to use pinpoint accuracy (just a few millimeters), to calculate the slopes of the underground pipes which supply water, in perfect conditions, to its target, and without using external sources of energy. In this cases, the water quality of which was obviously linked to the type of substrate, conditioned the settlements and even its use, that could be restricted to certain social classes. In some cases, the engineering works of these fountains were especially relevant for its uniqueness, monumentality and appearance. There are many architectural trends that come together in the studied fountains, which also contain of its own historical character. This research is focused on inventory categorization and characterization of a representative sample of 550 natural fountains in Madrid. It includes the detailed study of the variables used in its characterization, through inferential treatments, and the "ad hoc" experimental design of a methodology for the categorization and a 360 ° characterization, from the catchment to the spout. Finally, the research ends with the implementation of the designed methodology, through the study, categorization and characterization of a specific case. Although this research is focused on fountains from Madrid surroundings, the main value is that the purposed methodology can be extrapolated to to manyother cases. To highlight these ignored engineering works, and contribute to its preservation making easier their categorization and spreading their existence, set the main aim of this research.

Prototype emitter for use in subsurface drip irrigation: Manufacturing, hydraulic evaluation and experimental analyses

The current research aims to analyse theoretically and evaluate a self-manufactured simple design for subsurface drip irrigation (SDI) emitter to avoid root and soil intrusion. It was composed of three concentric cylindrical elements: an elastic silicone membrane; a polyethylene tube with two holes drilled on its wall for water discharge; and a vinyl polychloride protector system to wrap the other elements. The discharge of the emitter depends on the change in the membrane diameter when it is deformed by the water pressure. The study of the operation of this emitter is a new approach that considers mechanical and hydraulic principles. Thus, the estimation on the membrane deformation was based on classical mechanical stress theories in composite cylinders. The hydraulic principles considered the solid deformation due to force based on water pressure and the general Darcy–Weisbach head-loss equation. Twenty emitter units, with the selected design, were handcrafted in a lathe and were used in this study. The measured pressure/discharge relationship for the emitters showed good agreement with that calculated by the theoretical approach. The variation coefficient of the handcrafted emitters was high compared to commercial emitters. Results from field evaluations showed variable values for the relative flow variation, water emission uniformity and relative flow rate coefficients, but no emitter was obstructed. Therefore, the current emitter design could be suitable for SDI following further studies to develop a final prototype.

Development of a PWR-W and an AP1000® containment building 3D model with a CFD code for Best-Estimate Thermal-Hydraulic Analysis

The simulation of design basis accidents in a containment building is usually conducted with a lumped parameter model. The codes normally used by Westinghouse Electric Company (WEC) for that license analysis are WGOTHIC or COCO, which are suitable to provide an adequate estimation of the overall peak temperature and pressure of the containment. However, for the detailed study of the thermal-hydraulic behavior in every room and compartment of the containment building, it could be more convenient to model the containment with a more detailed 3D representation of the geometry of the whole building. The main objective of this project is to obtain a standard PWR Westinghouse as well as an AP1000® containment model for a CFD code to analyze the thermal-hydraulic detailed behavior during a design basis accident. In this paper the development and testing of both containment models is presented.